saatvik green energy-3-75w1 · current at maximum power (imp) in amps maximum system voltage (vdc)...
TRANSCRIPT
SAATVIKGREENENERGY
™
* Please refer to Saatvik Product Warranty for details.** Please refer to Saatvik Module Installation Manual for details.
Copyright © Saatvik Green Energy Pvt. Ltd. All rights reserved.
SAATVIKGREENENERGY
™www.saatvikgroup.com
THE SAATVIK EDGE
High module conversion efficiencyModule efficiency up to 14.55%achieved.
High PID resistantAdvanced cell technology andqualified materials lead to highresistance to PID
Postive TolerancePositive tolerance of up to5W delivers higher output relaibility.
Extended wind and snow load tests Module certified to withstand extremewind (2400 Pascal) and snow loads(5400 pascal).
Low irradiance Outstanding low irradianceperformance: 96.0%
Saatvik current sorting processSystem output maximized byreducing mismatch losses withmodules sorted and packaged byamperage.
Withstanding harsh environmentSalt mist and amonia tests ensurebetter sustainability in harshenvironment such as desert, farm andcoastline
Rigorous testing criteria100% EL inspection ensuringdefect-free modules.
IP67 Rated junction box1P67 junction box for long-termweather endurance.
APPLICATIONS
Home appliancesSolar street lighting
Polycrystalline Solar Module
Saatvik-60 Watt Saatvik-75 Watt
Saatvik-50 Watt Saatvik-40 Watt
ISO 9001:2015 / Quality management systemISO 14001:2015 / Standards for environmental management system
Management System Certificates
OHSAS 18001:2007 / International standards for occupational health & safety
Product CertificatesIEC 61215 / IEC 61730: TUV RheinlandUL 1703IEC 61701 ED2
ISO14001 : 2015
Certifie
d Com
pany
Excellent performance under weak light conditions: at an irradiationintensity of 200 W/m2 (AM 1.5,25 °C ), 96.0% or higher of the STCefficiency (1000 W/m2) is achieved
PARTNER SECTION
• Optimum panel efficiency suitable for roof-tops, ground mounted, solar water pumping for utility applications.• Suitable for all environment conditions.
Cop
yrig
ht©
Saa
tvik
Gre
en E
nerg
y P
vt. L
td.A
llrig
hts
rese
rved
.
Other Characteristics
Cell Type
Front Face
Encapsulate
Frame Material
J-Box
Temp. Coefficients
NOCT (°C)
Multi Crystaline Silicon
Tempered Glass (Low Iron), 3.2mm
Ethylene Vinyl Acetate
Silver Anodized Aluminium Profile,(Black Frame on request)
IP65, Weather Proof Nylon, 2/3/4 diodes arrangement.
46±2°C
Model No.Power (Pm) in Watts (nominal)Matrix sizeNo. of CellsLength of Cell (mm)Width of Cell (mm)Open Circuit Voltage (Voc) in VoltsShort Circuit Current (Isc) in AmpsVoltage at Maximum Power (Vmp) in volts
Current at maximum Power (Imp) in AmpsMaximum system Voltage (VDC)Module Size (L x W X H) in mm
Mounting Hole Pitch (X)Mounting Hole Pitch (Y)
MODULE DATASHEET SAATVIK
Module Weight in Kgs
Module Efficiency in %
SGE-40W409*43639156
22.322.4517.96
2.23600
470*665*35
200630
3.88
12.80
SGE-50W509*43652156
22.323.0617.96
2.78600
545*665*35
200630
4.30
13.80
SGE-60W609*43666156
22.003.6717.96
3.34600
685*665*35
400630
5.29
13.17
SGE-75W
17.96
759*43678156
22.004.59
4.18600
775*665*356.03400630
14.55
1 10 25
100%
10
97.5%
80%25
90%
80.7%
Industry leading warranty based on Nominal Power
97.5% in the first year, thereafter, for years two (2) through twenty-five (25),0.7% maximum decrease from module’s nominal power output per year, endingwith the 80.7% in the 25th year after the defined WARRANTY STARTING DATE.**
10 year product warranty
25 year linear performance warranty
www.saatvikgroup.com
Toll Free No. : 1800-1801051 | Email: [email protected] | Website: www.saatvikgroup.com
-0.408 %/K
-0.297 %/K
0.045 %/K
Pmax
Voc
Isc