safety data sheet - hmtmfg.com · safety data sheet issuing date no data available revision date...
TRANSCRIPT
SAFETY DATA SHEETIssuing Date No data available Revision Date 22-May-2Q15 Revision Number 1
The supplier identified below generated this SOS using the UL SDS template. UL did riot test, certify, or approve the substance described in this SDS, andall information in this SDS was provided by the supplier or was reproduced from publically available regulatory data sources. UL makes no representationsor warranties regarding trie completeness or accuracy of the information in this SOS and disclaims all liability in connection with the use of this informationor the substance described in this SDS The layout, appearance and format of this SDS is® 2014 UL LLC. All rights reserved.
1 IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND OF THECOMPANY/UNDERTAKING
Product identifier
Product Name
Other means of identification
Synonyms
Advantage Hot Melt Adhesive
None
Recommended use of the chemical and restrictions on use
Recommended Use Industrial Use Only
Uses advised against No information available
Details of the supplier of the safety data sheet
Supplier Name
Supplier Address
Supplier Phone Number
Supplier Email
Emergency telephone number
HMT Manufacturing Inc
2323 Commonwealth AveNorth ChicagoIL60064US
Phone:8474732310Fax:84747323459Contact Phone8474732310
2. HAZARDS IDENTIFICATION
Classification
This chemical is not considered hazardous by the 2012 OSHA Hazard Communication Standard (29 CFR 1910.1200)
GHS Label elements, including precautionary statements
Emergency Overview
Page 1 / 9
1246560- Advantage Hot Mett Adhesive Revision Date 22-May-2015
The product contains no substances which at their given concentration, are considered to be hazardous to health
Appearance j/Vhite to off-while Physical state Solid Odor Odorless
Precautionary Statements - PreventionObtain special instructions before use
Precautionary Statements - ResponseNone
Precautionary Statements - StorageNone
Precautionary Statements - DisposalNone
Hazards not otherwise classified (HNOC1
Not applicable
Unknown Toxicity100% of the mixture consists of ingredient(s) of unknown toxicity
Other information
May cause slight eye irritation
Interactions with Other ChemicalsNo information available.
Chemical Name CAS No Weight-%Supplier Trade Secret Proprietary 1 -5
'The exact percentage (concentration) of composition has been withheld as a trade secret
First aid measures
Eye contact
Skin contact
Inhalation
Ingest! on
Rinse thoroughly with plenty of water, also under the eyelids. If symptoms persist,call a physician.
Wash with soap and water.
Remove to fresh air,
Rinse mouth immediately and drink plenty of water. Never give anything by mouthto an unconscious person.
Page 2 / 9
1246560- Advantage Hot Melt Adhesive Revision Date 22-May-2015
Most important symptoms and effects, both acute and delayed
Most Important Symptoms and No information available.Effects
Indication of any immediate medical attention and special treatment needed
Notes to Physician Treat symptomatically.
5. FIRE-FIGHTING MEASURES
Suitable Extinguishing MediaUse extinguishing measures that are appropriate to local circumstances and the surrounding environment.
Unsuitable extinguishing mediaCAUTION: Use of water spray when fighting fire may be inefficient.
Specific hazards arising from the chemicalNo information available.
Hazardous Combustion ProductsCarbon oxides.
Explosion DataSensitivity to Mechanical Impact No.
Sensitivity to Static Discharge No.
Protective equipment and precautions for firefightersAs in any fire, wear self-contained breathing apparatus pressure-demand, MSHA/NIOSH (approved or equivalent) and fullprotective gear.
6. ACSJPENTAL MEASURES
Personal precautions^ protective equipment and emergency procedures
Personal precautions
Environmental precautions
Avoid contact with eyes.
Environmental precautions Refer to protective measures listed in Sections 7 and 8.
Methods and material for containment and cleaning up
Methods for containment Prevent further leakage or spillage if safe to do so.
Methods for cleaning up Pick up and transfer to properly labeled containers.
Page 3/9
1246560- Advantage Hot Melt Adhesive Revision Date 22-May-2015
7, HANDLING AND STORAGE
precautions for safe handling
Handling
Conditions for safe storage, including any incompatibilities
Handle in accordance with good industrial hygiene and safety practice. Avoid contact witheyes.
Storage
Incompatible Products
Keep container tightly closed.
None known based on information supplied.
I 8. EXPOSURE CONTROLS/PERSONAL PR
Control parameters
Exposure Guidelines
Chemical NameSupplier Trade Secret
ACGIH TLV OSHA PEL(vacated) TWA: 15 mg/m3 total
dust(vacated) TWA: 5 mg/m'
respirable fraction
NIOSHIDLHTWA: 10 mg/m3 total dust
TWA: 5 mg/m3 respirable dust
ACGIH TLV: American Conference of Governmental Industrial Hygienists - Threshold Limit Value OSHA PEL: Occupational Safety and HealthAdministration - Permissible Exposure Limits Immediately Dangerous to Life or Health
Other Exposure Guidelines
Appropriate engineering controls
Vacated limits revoked by the Court of Appeals decision in AFL-CIO v. OSHA, 965 F.2d 962(11th Cir., 1992) See section 15 for national exposure control parameters
.Engineering Measures ShowersEyewash stationsVentilation systems
Individual protection measures, such as personal protective equipment
Eye/face protection
Skin and body protection
Respiratory protection
Hygiene Measures
No special protective equipment required.
No special protective equipment required.
No protective equipment is needed under normal use conditions. If exposure limits areexceeded or irritation is experienced, ventilation and evacuation may be required.
Handle in accordance with good industrial hygiene and safety practice.
9. PHYSICAL AND CHEMICAL PROPERTIES
Physical and Chemical Properties
Physical stateAppearanceColor
SolidWhite to off-whiteNo information available
OdorOdor Threshold
OdorlessNo information available
Page 4 / 9
1246560- Advantage Hot Melt Adhesive Revision Date 22-May-2015
Property ValuespH No data availableMelting / freezing point No da a availableBoiling point / boiling range No da a availableFlash Point No da a availableEvaporation Rate No da a availableFlammability (solid, gas) No da a availableFlammability Limit in Air
Upper flammability limit No da a availableLower flammability limit No da a available
Vapor pressure No da a availableVapor density No data availableSpecific Gravity No data availableWater Solubility InsolubleSolubility in other solvents No data availablePartition coefficient: n-octa no I/water No data availableAutoignition temperature No data availableDecomposition temperature No data availableKinematic viscosity No data availableDynamic viscosity No data availableExplosive properties No data availableOxidizing properties No data available
Other Information
Softening Point No data availableVOC Content (%) No data availableParticle Size No data availableParticle Size Distribution
[ 19.STMN3BBS6Reactivity
No data available.
Chemical stabilityStable under recommended storage conditions.Possibility of Hazardous ReactionsNone under normal processing.Hazardous PolymerizationHazardous polymerization does not occur.
Conditions to avoidNone known based on information supplied.Incompatible materialsNone known based on information supplied.Hazardous Decomposition ProductsCarbon oxides.
I
Remarks MethodNone knownNone knownNone knownNone knownNone knownNone known
None knownNone knownNone knownNone knownNone knownNone knownNone knownNone knownNone knownNone known
mmmmti&MittMimwiimmmiInformation on likely routes of exposure
Product Information
Inhalation
Specific test data for the substance or mixture is not available.
Specific test data for the substance or mixture is not available.
Page 5 / 9
1246560- Advantage Hot Melt Adhesive Revision Date 22-May-2015
Eye contact
Skin contact
Ingestion
Component Information
Specific test data for the substance or mixture is not available.
Specific test data for the substance or mixture is not available.
Specific test data for the substance or mixture is not available.
information on tpxicological effects
Symptoms No information available.
Delayed and immediate effects as well as chronic effects from short and long-term exposure
Sensitization
Mutagenic Effects
Carcinogenicity
No information available.
No information available.
The table below indicates whether each agency has listed any ingredient as a carcinogen.
Reproductive toxicity
STOT - single exposure
STOT - repeated exposure
Chronic Toxicity
Target Organ Effects
Aspiration Hazard
No information available.
No information available.
No information available.
No known effect based on information supplied.
Eyes. Respiratory system. Skin.
No information available.
Numerical measures of toxicity Product Information
The following values are calculated based on chapter 3.1 of the GHS documentNot applicable
| 12. ECOLOGICAL INFC
EcotoxicityThe environmental impact of this product has not been fully investigated.
Persistence and DegradabilityNo information available.
Bio-accumulationNo information available
Other adverse effectsNo information available.
Page 6 / 9
1246560- Advantage Hot Melt Adhef Revision Date 22-May-2015
13, DISPOSAL CONSIDERATIONS
Waste treatment methods
Disposal methods
Contaminated Packaging
This material, as supplied, is not a hazardous waste according to Federal regulations (40CFR 261). This material could become a hazardous waste if it is mixed with or otherwisecomes in contact with a hazardous waste, if chemical additions are made to this material, orif the material is processed or otherwise altered. Consult 40 CFR 261 to determine whetherthe altered material is a hazardous waste. Consult the appropriate siate, regional, or localregulations for additional requirements.
Dispose of contents/containers in accordance with local regulations.
14. TRANSPORT INFORMATION
DOTProper Shipping NameHazard Class
NOT REGULATEDNON REGULATEDN/A
TDG
MEX
ICAO
IATAProper Shipping Nan-Hazard Class
Not regulated
Not regulated
Not regulated
Not regulatedNON REGULATEDN/A
IMDG/IMOHazard Class
Not regulatedN/A
Not regulated
Not regulated
Not regulated
1-5. REGULATORY INFORMATION
CompliesAll components are listed either on the DSL or NDSL.
TSCA - United States Toxic Substances Control Act Section 8(b) InventoryDSL'NDSL - Canadian Domestic Substances List/Non-Domestic Substances List
US Federal Regulations
SARA 313Section 313 of Title III of the Superfund Amendments and Reauthorization Act of 1986 (SARA). This product does not contain anychemicals which are subject to the reporting requirements of the Act and Title 40 of the Code of Federal Regulations, Part 372
Page 7 / 9
1246560- Advantage Hot Melt Adhesive Revision Date 22-May-2015
SARA 311/312 Hazard CategoriesAcute Health HazardChronic Health HazardFire HazardSudden release of pressure hazardReactive Hazard
NoNoNoNoNo
CWAfClean Water Act)This product does not contain any substances regulated as pollutants pursuant to the Clean Water Act (40 CFR 122.21 and 40CFR 122.42)
CERCLAThis material, as supplied, does not contain any substances regulated as hazardous substances under the ComprehensiveEnvironmental Response Compensation and Liability Act (CERCLA) (40 CFR 302} or the Superfund Amendments andReauthorization Act (SARA) (40 CFR 355). There may be specific reporting requirements at the local, regional, or state levelpertaining to releases of this material
US State Regulations
California Proposition 65This product does not contain any Proposition 65 chemicals.
U.S. State Right-to-Know Regulations
Chemical NameSupplier Trade Secret
New JerseyX
MassachusettsX
PennsylvaniaX
Rhode Island Illinois
International Regulations
MexicoNational occupational exposure limits
ComponentSupplier Trade Secret
( 1 - 5 )
Carcinogen Status Exposure LimitsMexico: TWA 10 mg/m3
Mexico - Occupational Exposure Limits - Carcinogens
1& QHHER INFORMATION
NFPA
HMIS
Prepared By
Revision DateRevision Note
Health Hazards 0
Health Hazards 0
Flammability 0
Flammability 0
Product Stewardship23 British American Blvd.Latham, NY 121101-800-572-650122-May-2015No information available
Instability 0 Physical andChemical Hazards -
Physical Hazard 0 Personal ProtectionX
DisclaimerThe information provided in this Safety Data Sheet is correct to the best of our knowledge, information and belief atthe date of its publication. The information given is designed only as a guidance for safe handling, use, processing,
Page 8 / 9
1246560- Advantage Hot Melt Adhesive Revision Date 22-May-2015
storage, transportation, disposal and release and is not to be considered a warranty or quality specification. Theinformation relates only to the specific material designated and may not be valid for such material used in combinationwith any other materials or in any process, unless specified in the text
End of Safety Data Sheet
Page 9 / 9