SAFETY HARNESS P-35

PersonalProtective Equipment

400 X 400

Aviator P-35 Safety Harness

Product Description

The P-35 full body harness is made from polyester/polyamide 44mm wide webbing which is sewn and then connected together using metal buckles.

The safety harness is designed to be worn around the shoulders and thighs to provide full support and to be comfortable to wear whilst working.

There is one front connecting buckle and four strap adjustments to ensure a safe and comfortable fit.

There is one 'D' ring at the rear and one also at the front to attach directly to the fall arrest system.

The harness can be used for 5 years from its first use and then must be withdrawn from use for a full inspection the manufacturer or its authorised representative.

Safety Features

On the reverse of the harness are two 'Fall use Indicators' comprising of oversewn pleated fabric. if these are in anyway damaged, which indicates that the harness might have been exposed to fall arrest conditions, the harness must not be used and replaced immediately.

On either side of the straps are highly visible lines of stitching. if the harness is frayed through use, beyond these lines the harness must not be used and replaced immediately.

Operating and Design Standards

The P-35 harness conforms to EN 361-2002 and carries the CE Mark - CE0082

This harness must be used in accordance with all current legislation for fall arrest systems, anchor devices and rescue equipment

Before use, please refer to the Instruction manual supplied with the harness.

Sayfa Systems UK LtdJubilee HouseNo. 3 Gelders Hall RoadShepshedLoughboroughLeicestershire LE12 9NH

T: 0845 241 9102F: 0845 130 4520email: info@sayfasystems.comwww.sayfasystems.co.uk

Rear attachment for fall arrest system

Identity label

Shoulder strap Adjusting

buckle for shoulder strap

Front attachment for fall arrest system

Front connecting buckle

Connecting and adjusting buckle for thigh strap

Fall use indicator - do not use if torn

Ref: 209: 11/16