sale sales on · 2019. 9. 17. · driveway markers 153-0065 yellow high visibility commercial &...

LED Strobe Lights LED Strobe Lights SALE 83.20SALE 83.20

Page 4Page 4

Sale Pricing Sale Pricing on all Cutting on all Cutting

EdgesEdges

8088880888$126.40$126.40

Inside Front CoverInside Front Cover

PW-22 Pro-WingsPW-22 Pro-WingsAs Low AsAs Low As $205.00 $205.00

When you buy 2When you buy 2Page 5 Page 5

SALE

SALESALE SAVE

Manufacturer names, part numbers, and descriptions such as Meyer are used for reference purposes only. It is not implied that any part listed is the product of the original manufacturers or approved by any manufacturers. Prices subject to change without notice.

9

800-888-5072

Index of parts that fit Meyer Plows

Lift & Mounting Cartons ................................ 10-11

A Frame, Sectors, Moldboard Parts ............. 12-13

Blade Guides, Deflectors, Fluid, Paint

& Cutting Edges ..........................................14

Plow Hardware, Springs & Shoes ...................15

Cylinders & Rams ............................................16

Hoses, Fittings & Couplers ..............................17

Switches & Harnesses ....................................18

Battery Cables & Wiring Diagram ....................19

E-47/E-57 Hydraulic Pump Breakdown ........ 20-21

E-58H Hydraulic Pump Breakdown .............. 22-23

E-60 Hydraulic Pump Breakdown ................. 24-25

Trouble Shooting and Fluid Maintenance ..... 26-28

Rubber Cutting Edges .....................................29

MEYER - EZ MOUNT® CLASSIC and EZ MOUNT® PLUS/MDII

The illustrations below shows different Meyer® plow frames. Compare your plow with picture below to assist in ordering the correct parts.

EZ Mount ClassicEZ Mount Classic

MD IIClevis

SWITCHING PLOWS FROM ONE TRUCK TO ANOTHER

When your old plow truck gives out and you decide to replace it with a new vehicle, keep in mind that your old truck may have had the Classic style setup and Meyer might not make that design setup for your newer truck. About the only thing that would be reusable in this case would be the moldboard itself. Updating the old plow to fit the new truck would be more expensive than purchasing a complete new setup.

EZ Mount® Plus Clevis

EZ Mount Plus & MDIIEZ Mount Plus & MDIILot ProLot Pro

The EZ Mount Classic has limited availability and is not being made for newer trucks. It uses a tubular lift frame that installs in front of the bumper and could be removed at the end of the season. The plow is attached with two "L" shaped hitch pins and uses a single lift chain.

The EZ Mount® Plus is one of the current setups that Meyer is manufacturing for the new trucks. Units use a dual lift chain.

If you are selling your truck and it has the Plus or MDII setup, remember to remove the universal clevis as this part is not included in the new mounting carton.

Newer Style

Old Style

The MDII lift frame could be removed with the blade or it could remain on the truck.

The MDII uses 6 colored pull pins (4 blue and 2 yellow) to remove the plow & lift frame.

The newer design, EZ Mount® Plus, uses only 2 blue pull pins and the blade and lift frame is removed as one.


10

MillSupply.com

Lift & Mounting Cartons & Accessories Lift & Mounting Cartons & Accessories EZ MountEZ Mount®® Plus and MDII Plus and MDIITMTM

MOUNTING BOLTS FOR PUMP ASSEMBLIES

10 97-360 5/8" x 5-1/2" Grade 5 Bolt for top of pump $2.82ea

11 M-1701 5/8" x 3-1/2" Grade 5 Bolt for bottom of pump $1.76ea

12 M-1702 5/8" Nylon Locknut for top or bottom bolt $0.60ea

13 93-160 5/8" Bone style locking Pin $16.15

14 93-170 5/8" x 2-3/8" Locking hitch pin $18.67

14 93-175 5/8" x 3" Locking hitch pin $18.67

15 HPL-58 5/8" Universal locking hitch pin $13.48

11

10

13

14

15

1

LOC. PART NO. DESCRIPTION YEAR PRICE

E-Z MOUNT® PLUS 'LOT PRO' CLEVIS & LIFT FRAME 1 160-83468 E-Z Mount® Plus Clevis & Lift Frame, Fits Lot Pro, "ST" "C" Blades

(Pump Assy., Lamps & Blade not included) $1,728.60

1A 160-88248 Left Light Bracket $72.33

1B 160-88247 Right Light Bracket $72.33

1C 160-77754 Crank stand $99.05

1D 160-80407 Lift Arm $191.42

1E 160-77563 1" Diameter x 3" Pin $22.26

2 160-88229 Univ. Clevis - MDll, used w/4 blue & 2 yellow pins, older mdls. $547.25

3 160-80629 Univ. Clevis - EZ Mount Plus, used w/2 blue pins, newer mdls. $385.09

E-Z MOUNT® PLUS 'DRIVE PRO' CLEVIS & LIFT FRAME

5 160-81018 E-Z Mount® Plus Lift Frame for Drive Pro Blades (uses crank stand) $802.90

6 160-83396 E-Z Mount® Plus Clevis Carton for Drive Pro Blades - Half Ton $661.37

7 160-83397 E-Z Mount® Plus Clevis Carton for Drive Pro Blades - Except Half Ton $479.63

E-Z MOUNT® PLUS MOUNTING CARTONS that fit CHEVROLET/GMC

N.I. 160-82880 K1500/2500/3500 series classic 4x4 88-00 $644.00

N.I. 160-82859 K1500 Series, Silverado/Sierra, Tahoe, Yukon, Subur. 4x4 99-06 $644.00

N.I. 160-82834 K1500 4x4, November 2006 frame change 07-13 $644.00

N.I. 160-82805 K1500 4x4 14-18 $644.00

N.I. 160-82860 K1500 HD Silverado/Sierra 4x4 01-09 $644.00

N.I. 160-82860 K2500/3500 4x4 99-10 $644.00

N.I. 160-82825 K2500/3500 4x4 11-19 $644.00

N.I. 160-82801 K2500 4x4 20-ON $644.00

E-Z MOUNT® PLUS MOUNTING CARTONS that fit DODGE

N.I. 160-82869 W1500 4x4 02-07 $644.00

N.I. 160-82827 W1500 4x4 08-12 $644.00

N.I. 160-82876 W2500/3500 4x4 94-03 $644.00

N.I. 160-82826 W2500/3500 4x4 03-12 $644.00

N.I. 160-82814 W2500/3500 4x4 13-ON $644.00

N.I. 160-82824 W4500/5500 4x4 and 4x2 11-12 $644.00

E-Z MOUNT® PLUS MOUNTING CARTONS that fit FORD

N.I. 160-82873 F150 PU 92-96 and Bronco 1992, 4x4 92-96 $644.00

N.I. 160-82875 F150 & F250 LD, 4x4 97-03 $644.00

N.I. 160-82858 F150 PU w/8200 GVWR, 4x4 04-08 $644.00

N.I. 160-82828 F150, 4x4 09-14 $644.00

N.I. 160-82807 F150, 4x4 15-ON $644.00

N.I. 160-82874 F250 w/4600 lb. front axle. 4x4 92-98 $644.00

N.I. 160-82871 F350, 4x4 92-98 $969.68

N.I. 160-82837 F250/F350/F450/F550 SuperDuty, 4x4 99-07 $644.00

N.I. 160-82810 F250/F350/F450/F550, 4x4 08-16 $644.00

N.I. 160-82804 F250-F550, 4x4 17-ON $644.00

Mounting Cartons EZ Mount Plus

& MDIIDo Not

Include Clevis

2

3

Old Style Clevis End View

MDIITM

1A

1B

1C

1D

1E

New StyleClevis End ViewEZ Mount® Plus

If you do not see your vehicle listed go to www.meyerproducts.com

12

76

5

LOT PRO

LOT PRO

LOT PRO

DRIVE PRO

DRIVE PRO

DRIVE PRO

Visit us online for moreVisit us online for moredetailed illustrations!detailed illustrations!

NEWNEW


11

800-888-5072

1

2

3

Lift & Mounting Cartons & Accessories Lift & Mounting Cartons & Accessories EZ MountEZ Mount®® Classic Classic

Lift ArmLift Arm

Lift FrameLift Frame

EZ GardEZ Gard

MOUNTING BOLTS FOR PUMP ASSEMBLIES 5 155-0120 5/8" Bolt w/nut for top of pump $2.68ea

6 M-1701 5/8" x 3-1/2" Grade 5 Bolt for bottom of pump $1.76ea

7 M-1702 5/8" Nylon Locknut for bottom of pump $0.60ea

8 93-160 5/8" Bone style locking Pin $16.15 8A 93-170 5/8" x 2-3/8" Locking hitch pin $18.67 8B 93-175 5/8" x 3" Locking hitch pin $18.67 8C HPL-58 5/8" Universal locking hitch pin $13.48 ACCESSORIES for MOUNTING CARTON 9 160-88455 Rubber Cap for Full Size Mounting Carton (sold each) $4.44

6

5

8

LOC. PART NO. DESCRIPTION YEAR PRICE

E-Z MOUNT® CLASSIC LIFT FRAMES & ACCESSORIES 1 160-88744 E-Z Mount® Lift Frame, Full Size Pickups $1,080.38 (Pump Assy., Lamps and Lift Arm not included) 1 160-88724 E-Z Mount® Lift Frame, Mid Size Pickups $795.10 S10/15 S-Blazer/Jimmy 83-94, S-Pickup 4WD 83-94 Dakota 4WD thru 1996, (less Pump Assy., Lamps and Lift Arm) 2 160-88441 E-Z GARD, Designed to slide into the Meyer $885.62 E-Z Mount® receiver tubes. Full Size Pickups 3 160-89490 Lift Arm $49.91

9 sold eachsold each8A, 8B

8C

Meyer® no longer makes EZ Mount Classic mounting cartons. This listing shows what is available at the beginning of the season. Stock is limited and will be discontinued as supplies run out. See the previous page for newer style mounting cartons.

Picture is for illustration purposes only. Actual mounting cartons vary slightly in design depending on vehicle.

7

Part Number Chevy Ford Dodge Years 1500 2500 3500 4500 5500 2X4 4X4 Desc Price

160-82861 X 99-06 X X Silverado & Sierra Series, Tahoe, Yukon, & Suburban $1,318.84

160-82888 X 99-06 XHD

X X XSilverado & Sierra Series, Yukon and Suburban $1,063.28

160-82864 X 03-06 X X X $1,330.79

160-82902 X 92-96 X X $1,063.28

160-82887 X 99-04 X X X Heavy Duty & Super Duty $1,154.07

160-82886 X 99-04 X X X X X Super Duty $1,138.06

Mounting CartonsMounting Cartons



12

MillSupply.com

A-FRAMES LOC. PART NO. DESCRIPTION OEM# PRICE

12 160-86387 A Frame for E-Z Mount® Classic, Chevy, Ford & Dodge 13612 $322.91 23-1/2" wide x 34" long, Fits 11" Sector 724920077818 1316105 13 160-86391 A Frame for E-Z Mount® Classic, Chevy, Ford & Dodge 13608 $571.07 15" x 31" x 23-1/2", Fits 15" Sector 724920077842 1316115 14 160-86288 A Frame for E-Z Mount® Plus and MDII, 13711 $731.92 Mdls ST/STL/STP -7.0 &7.5; 11" x 34" x 22-1/8", Fits 11" Sector 15 160-86284 A Frame for E-Z Mount® Plus and MDII, Mdls C/CP-7.5, 8.0, 13715 $788.81 8.5, 9.0 & HML10, 15" x 31" x 22-1/8", Fits 15" Sector 16 160-86479 A Frame for EZ Mount Classic, Lot ProTM 13520 $916.02 17 160-86499 A Frame for EZ Mount Plus, Lot ProTM 13500 $809.21 18 160-86405 A Frame for Models TM 5.0, 6.0 & 6.5 13594 $664.21

A Frames and SectorsA Frames and Sectors (Always check dimensions)(Always check dimensions)

21 (used with 12, 14)

11"

22 (used with 11, 13, 15)

15"

SECTORS (PIVOT BARS)SECTORS (PIVOT BARS)

EZ Mount EZ Mount ®® ClassicClassic

31"15"

13 EZ Mount EZ Mount PlusPlus

& MDII& MDII

15"

22-1/8"

15

TM ModelTM Model

18

EZ Mount PlusEZ Mount PlusLot Pro Lot Pro TMTM

17

EZ Mount ClassicEZ Mount ClassicLot Pro Lot Pro TMTM

16

SECTORS (PIVOT BARS)LOC. PART NO. DESCRIPTION PRICE

21 160-87673 11" Sector, See Dimension $341.4522 160-87206 15" Sector, See Dimension $523.76N.I. 160-87249 Pivot Bar (Lot Pro Models) $1,014.19

155-2053Bushing for

160-86479 and 160-86499

$6.67

NON-STICK POLY SNOW NON-STICK POLY SNOW PLOW LINERPLOW LINER

• YellowYellow Non Stick Liner• One size fits all - 96" x 28"• Trims easily with aviation snips or sharp knife• Includes 9 top-edge mounting fasteners and

silicone sealant

153-9628 YellowYellow Plow Liner, $39.50

A quick and easy way to make your plow look new again!

Custom

Classic

MDII & Plus

34" 11"

EZ Mount EZ Mount PlusPlus

& MDII& MDII

14

EZ Mount EZ Mount ®® ClassicClassic

34"

23-1/2"

11"

12

JACK STAND LOC. PART NO. DESCRIPTION OEM# PRICE

19 155-0188 Jack Stand 22245 $62.98

19


13

800-888-5072

Mold Board and Mold Board and A Frame Replacement PartsA Frame Replacement Parts

TM - 6.0 & 6.5

LOC. PART NO. DESCRIPTION REPLACES OEM# PRICE

A 155-2020 Outer Rib, Fits Left or Right 12144 $24.48 B 155-2022 Rib Pipe Pivot, Right 12500 $123.11 C 155-2023 Rib Pipe Pivot, Left 12501 $104.61 D 155-2025 Runner Bracket 12493 $25.59 E 155-0135 Pivot Pin Tube, Set of 2 12149 $15.60 F 155-0140 Washers for pivot pin tube, set of 2 07141 $4.40


A 155-2045 Pivot Rib Assy, Left 12461 $242.30 B 155-2038 Runner Bracket 12907 $34.49

Moldboard length: 6' & 6-1/2'Moldboard height: 23"

No. of trip springs: 2

Moldboard length: 7' & 7-1/2'Moldboard height: 25"

No. of trip springs: ST-7.0: 2No. of trip springs: ST-7.5: 3

Moldboard length: 7-1/2', 8' & 8-1/2'Moldboard height: 28"


Moldboard length: 9' & 10'Moldboard height: 32"


ST - 7.0 & 7.5

HM - 9 & 10

C-7.5, 8.0, 8.5 & 9.0


A 155-2005 Horizontal Rib, Fits Left or Right 12460 $36.08 B 155-2012 Pivot Pipe 12995 $22.26


A 155-2032 Formed Rib Inner, Fits Left or Right 12197 $23.36 B 155-2034 Pivot Rib Assy, Left 12941 $222.84 C 155-2038 Runner Bracket 12907 $34.49

MDllTM 11" MDllTM 15" Loc A-Frame Price A-Frame Price Description A 155-2251 $15.57 155-2252 $50.06 Pivot Arm Clevis C 155-2262 $46.73 155-2262 $46.73 Hinge Connector D 155-2264 $42.63 155-2266 $26.71 Nose Piece, Bottom E 155-2271 $23.36 155-2273 $62.31 Nose Piece, Top F 155-2276 $10.01 Bushing G 155-2280 $55.63 155-2282 $60.15 Sector Release Bracket H 155-2286 $8.32 155-2286 $8.32 Chain Connector I 155-2287 $21.46 155-2287 $21.46 Tube Mount

11" & STL 15" Loc A-Frame Price A-Frame Price Description A 155-2251 $15.57 155-2252 $50.06 Pivot Arm Clevis B 155-2255 $5.45 155-2255 $5.45 Hose Guard C 155-2260 $31.16 155-2260 $31.16 Hinge Connector D 155-2264 $42.63 155-2266 $26.71 Nose Piece, Bottom E 155-2271 $23.36 155-2273 $62.31 Nose Piece, Top F 155-2276 $10.01 Bushing G 155-2280 $55.63 155-2282 $60.15 Sector Release Bracket H 155-2285 $3.08 155-2285 $3.08 Chain Connector

E-Z Mount® Classic

E-Z Mount® Plus& MDII

A-FRAME PARTS

B

A

A

B

A

A

D

D

C

C

C

B

A

B

B

A

AC

B H

G

E F

D

AC

I

GH

E F

D



E

F


14

MillSupply.com

Blade Guides (For High Visibility Markers see page 8)


1 153-0020 Marker Kit 09916 $10.25/pr

2 155-0301 Replacement Tip (each) N/A $0.30

12

9 10

Hydraulic Fluid

LOC PART NO. DESCRIPTION REPLACES OEM# PRICE

9 155-9450 Hydraulic Fluid, 1 Quart SALE $5.95 15134 Reg $8.61/qt

9 155-9460 Hydraulic Fluid, 1 Case(12 Quarts) SALE $59.00 15487 Reg $80.75/case

10 155-9470 Genuine Meyer Hydraulic Fluid, 1 Quart 15134 $13.58/qt.

See Page 29 for

Rubber Cutting Edges

Cutting Edges - High Carbon Steel


16 155-0070 Set of 6 (Two Meter), 1/2" x 2" USS 08486 $5.92

16 155-0078 Set of 8, 1/2" x 2" USS $7.80

16 155-0075 Set of 9, 1/2" x 2" USS (ST78/C-8.5) 08184 $8.77

16 155-0080 Set of 12, 5/8" x 2-1/2" USS (M-9/M-10) 08318 $17.95

16

Paint


19 155-0550 Yellow (11 oz.) aerosol 08677 $14.41

20 155-0570 *Meyer (1 Quart can), snow flow, yellow 07181 $48.40

19 20

* Quart Containers Shipped Via USPS

Up to 7-1/2' Plow Non Commercial

( 3 Springs or Less )

8' and Up Plows and 7-1/2' Commercial Plows

( 4 Springs or More )

6

Snow Deflector

7

15

SPECIAL SALESPECIAL SALETHRU 12/31/20THRU 12/31/20155-9450 1 QT $5.95155-9460 1 CASE $59.00

For Snow Plow Lights See Pages 1-3For Snow Plow Lights See Pages 1-3

Cutting Edges are heavy and require extra shipping charges, please call.

5

8

153-0125 - Plow Guard Xtendor, Pre-punched with 1/2" square holes. $191.03/pr Fits most smaller Meyer plows plus some Western & Fisher.153-0127 - Plow Guard Xtendor, Pre-punched with 5/8" square holes. $191.03/pr

Plow Xtendor

Reduces blade changes up to 400% due to the carbide matrix wear edge.


5 155-9500 Deflector Kit for ST-78/90, 96" X 9" 12896/7 $76.83 7 155-9505 Replacement Rubber, 96" x 9" X 3/8", for Deflector (155-9500) $45.04 6 155-9510 Deflector Kit for C-8.5 / HM9 / HM1, 120" x 9" 12898 $80.45 7 155-9515 Replacement Rubber, 120" x 9" x 3/8", for Deflector (155-9510) $56.53 6 1309025 Universal Super-Duty Deflector Kit, 120" x 12" X 1/2" rubber $97.84 7 1309030 Replacement rubber, 120" x 12" X 1/2", cut to size to use on all deflectors $74.11 7 1309096 96" x 9" x 3/8" Belted Rubber Snow Deflector, 13" hole spacing $103.31 7 1309120 120"L x 12" x 3/8" Belted Rubber Snow Deflector, 10.25" hole spacing $142.88 7 1309144 144"L x 12" x 3/8" Belted Rubber Snow Deflector, not drilled $153.41 8 153-0790 Contoured Thermoplastic Snow Deflector, 3/16" x 8" x 108" $109.41

Also fits Lot Pro & Road Pro

NEWNEW

NEWNEW

NEWNEW

LOC. PART NO. DIMENSIONS* NO OF HOLE REPLACES PRICE SALE

15 155-9002 48" x 6" x 1/2"** 7 5/8" 09484 $86.84 15 155-9003 54" x 6" x 1/2"** 7 5/8" 09485 $98.09 15 155-9004 60" x 6" x 1/2"** 8 5/8" 09486 $109.53 15 155-9005 78" x 6" x 1/2" 6 1/2" 09100 $97.00 $87.30 15 155-9010 72" x 6" x 3/8" 7 1/2" 09130 $94.24 $84.00 15 155-9015 78" x 6" x 3/8" 8 1/2" 09131 $99.20 $86.00 15 155-9017 78" x 6" x 1/2" 8 1/2" 09131 $120.08 $110.00 15 155-9020 84" x 6" x 3/8" 7 1/2" 09132 $106.00 $91.09 15 155-9025 90" x 6" x 3/8" 8 1/2" 09796 $108.90 $98.01 15 155-9030 90" x 6" x 1/2" 8 1/2" 09796HD $136.38 $122.74 15 155-9035 96" x 6" x 1/2" 8 1/2" 09133 $141.90 $127.71 15 155-9040 102" x 6" x 1/2" 9 1/2" 09134 $146.00 $136.00 15 155-9045 108" x 6" x 1/2" 11 5/8" 07259 $154.96 $144.00 15 155-9050 120" x 6" x 1/2" 12 5/8" 07235 $176.00 $165.00 15 155-9055 120" x 6" x 5/8" 12 5/8" 07235 $225.00 $214.00 *(all holes are top punch except half blades) **(half blade for V-Plow)

HOLES SIZE OEM#

Cutting Edge Bolts and Nuts

SPECIAL SALE PRICINGthru 12/31/2020


15

800-888-5072


25 155-9200 Runner Assy, Drive Pro, TM & STL model 09127 $34.05 Spindle Dim: 3/4" x 7-1/2"; Disc Dia: 4-7/8" 26 155-9205 Shoe Assembly ST-78/C-8.5 09126 $24.64 27 155-9215 Runner Only ST-78/C-8.5 07006 $19.46 28 155-9210 Shoe Assembly HM-9/HM-10 09592 $48.01 29 155-9220 Runner Only HM-9/HM-10 07086 $38.48 30 155-9225 Spindle Only ST-78/HM-10, 1-3/16" dia. 12057 $14.47 31 155-9227 Shoe Assembly Lot Pro 09362 $98.97 34 315-0120 7/16" Linch Pin (Fits BPC Spindle) 20420 $0.78 34 155-0235 1/4" Linch Pin (Fits OEM Spindle) 22083 $0.98 35 155-0240 Washer 20363 $0.58

20

22

1

25

Trip Springs and Eye Bolt

Plow Hardware

8


1 155-0120 5/8" King Bolt Assembly with nut 09122 $2.68 1 155-0125 3/4" x 3-1/2" King Bolt Assembly with nut 09125 $3.96 2 155-0126 5/8" x 5-1/2" King Bolt with grease fitting 13591 $46.73 3 M-1702 5/8-11 Nylon Lock Nut for 155-0126 $0.60 4 155-0130 (2) Pivot Pin w/Cotter, non greaseable 08554 $11.75/pr 5 155-0131 (2) Pivot Pin, Greaseable (fits ST, C, HM) 08554 $21.76/pr 6 155-0137 5/8" x 7" Pivot Pin, Drive Pro 22720 $14.45 7 155-0134 Pivot Bolt, Greaseable for TM (5/8" x 7.25") 13598 $51.96/ea 8 155-0135 (2) Pivot Pin Tube 12149 $15.60/pr 9 155-0140 (2) Washer - for Tube 07141 $4.40/pr 10 155-0145 (2) Hinge Pins 5/8" w/Linch Pins 08562 $6.01/pr 11 155-0235 Linch Pin Only, 1/4" 22083 $0.98 12 155-0147 Connecting Pin Assy, Blue 11859 $15.54 12 155-0149 Connecting Pin Assy, Yellow 11860 $15.54 13 315-0140 Spring for Connecting Pin $1.14 14 256-0160 Hairpin Cotter 08543 $0.56 15 AV-8495-P Cotter Pin, 3/16" x 1-1/2" 20406 $0.15

2

9

26

1110


20 155-0105 Eyebolt with 2 Nuts and Lockwasher 09124 $3.84 21 155-9110 Trip Spring 07017 $14.00 22 155-9115 Trip Spring, TM & STL & Drive Pro 12978 $22.18 23 155-9120 Trip Spring, SuperV & Super V2 17215 $27.30

45

7

6

13 1415

15

12

16

17 18

19

Shoes and Parts

Underseat Emergency Repair Kit for Meyer Plows

3534

28

27

31

30

3

21

29

BRC-01-M Kit contains: Trip Spring, Eyebolt w/nuts, Hinge Pins w/clips, 45" Hose, Motor Solenoid, 90o Swivel Elbow, Quick Coupler. $86.19

LOT PRO & ROAD PRO PIVOT PINS AND KING BOLTS 15 AV-8495-P Cotter Pin, 3/16" x 1-1/2" 20406 $0.15 16 155-0127 (2) - 1" x 8-3/4" Pivot Pins w/grease fitting 22375 $84.68 17 155-0128 1" x 5-1/2" King bolt w/grease fitting 22398 $81.46 18 155-0129 1" Slotted Hex Nut for 155-0128 22274 $2.25 19 155-0136 1" x 3-5/15" Center Hex Head Pivot Pin 22331 $40.06

Kit contains the most frequently used on-the-job repair parts and are packaged in a polyethylene box designed for under the seat storage



NEW

23


16

MillSupply.com

9 10

2 or 3 SPRINGTM/TMP (Trimline) Series

ST/STL/STP (Standard) Series

4 SPRINGCP (Husky) Series

1A

1C

1D

2A5

6

TMP STP

ST 6 SPRINGHM (Heavy Municipal)

Series

Power Angling & Lift Cylinders


1A 155-9260 Angling Cylinder, 1-1/2" Ram x 10", 05810 $80.00 1/4" NPT Hose Port (2 or 3 springs, TM/ST/STL) 1B 155-9264 Angling Cylinder, 1-1/2" Ram x 10" 07968 $110.06 Cross drilled, w/9/16"-18 hose port 1C 155-9265 Angling Cylinder, 1-1/2" Ram x 12" 05437 $81.56 (4 springs, C series),1/4 NPT Hose Port 1D 155-9270 Angling Cyl, 1-1/2" Ram w/2" x 12" Bore 05752 $123.00 (6 spring, HM series), 1/4 NPT Hose Port 1E 155-5815 Angling Cyliner, 1-3/4" Ram x 8" 05815 $121.84 1F 155-5880 Angling Cylinder, 2" Ram x 9-3/4" 05880 $123.38 1G 155-5756 Angling Cylinder, 1-1/4" Ram x 12" 05756 $121.84 2A 155-9275 Lift Cylinder, 1-1/8" Ram x 6" 05984 $96.60 1/4 NPT Hose Port 4 160-77539 Rigid Elbow w/9/16"-18 thread, 90 degree 22460 $18.91 5 M-1701 5/8" x 3-1/2" Gr. 8 Bolt (each) N/A $1.76 6 M-1702 5/8" Nylon Locknut (each) N/A $0.60

1B


9 256-0405* Seal Kit 1-1/2" RAM 07705 $9.20 9 155-0405 Seal Kit 2" RAM 07799 $13.16 10 155-0410 Packing Nut 1-1/2" RAM 07805 $22.02 10 155-0415 Packing Nut 2" RAM 07806 $26.52

Seal Kits and Packing Nuts for Angling Cylinders

4

Hose Conversion Kit for MeyerHose Conversion Kit for Meyer

Changing your swivel fittings to rigid fittings brings you these advantages...• Stop the breakage and leaks from swivel fittings• Cleaner look - No more hose left on truck when plow is off.• Standardize all your pumps so they are interchangeable (even E-47 to E-60) by using this conversion.• Easier to Connect or Disconnect Hoses

155-9380 Hose Conversion Kit for Meyer $52.25 Includes (2) 155-9390 hoses; (3) 256-0370 tall elbow; (1) 256-0365 short elbow; (2) 324-0128 dust plug. This kit does not include couplers, order 155-0377 separately.

BEFORE

AFTER

Mud Flaps

Heavy duty 1/4" thick flap is designed to attach to front and rear fenders of single and dual wheel pickup trucks. One PairKN-040101 Mud Flaps 12"Wx18" L $16.90/pr

12" Wide x 18" Long

* This is a universal seal kit. You may or may not use all seals included.

Measurement


1E

1F1G

NEWNEWNEW


17

800-888-5072


11 324-0122 Dust Plug, 2 pc. set, for 155-0375 coupler $6.98 (will not fit 159-xxxx couplers listed below) 12 155-0370 Swivel Ell, 90 degree 21855 $4.41 13 256-0370 Rigid Elbow, 90 degree, Tall 21857 $4.25 14 256-0365 Rigid Elbow, 90 degree, Short 22141 $2.86 16 155-0385 Adaptor, 9/16-18 Male, 1/4 Female NPT $1.72 17 155-0379 Adaptor Fitting to use on new block to enable the $9.90 use of Aftermarket Coupler (155-0375) 3/4-16 x 1/4 NPT "Low Spill" and 155-0375 couplers are not compatible with each other. If your valve block has

"Low Spill" couplers, you can purchase 155-0379 adapters and then use aftermarket couplers.

18 155-0375 Quick Coupler 15072 $10.75 (not compatible with "Low Spill" style) 20 155-0381 Adaptor, 9/16-18 Male x 1/4 Male NPT $1.66 21 155-0383 Adaptor, 9/16-18 Female to 1/4 Male NPT $3.34 22 159-0745 Coupler, Female half, fits E-58 pumps 22445 $40.07 23 159-0742 Coupler, Male half, fits E-58 pumps 22442 $32.03 24 159-0743 Coupler, Female half, 9/16-18 Female thread 22443 $40.07 25 159-0744 Coupler, Male half, 9/16-18 Female thread 22444 $31.67

12

18 (Two Piece)

11Two Piece Set

17

16

20

21

9 (Two piece set pin style coupler)

1

2

3


1 155-9350 45" Hose w/1 Swivel, 1/4" Male NPT 21856 $10.90 1 155-9355 65" Hose w/1 Swivel, 1/4" Male NPT 21866 $16.62 1 155-9365 70" Hose w/1 Swivel, 1/4" Male NPT 21868 $17.48 2 155-9360 70" Hose w/2 Swivels, 1/4" Male NPT 21867 $20.42 3 155-9390 45" Hose, 1/4" Male/Female NPT 22144 $15.80 4 155-9391 33" Hose with 9/16-18 Male/Male 22395 $24.95 4 155-9392 39" Hose with 9/16-18 Male/Male 22396 $26.10 5 22461 38" Hose,9/16-18 Male/Female Genuine Meyer 22461 $37.94 with extra male adapter 6 155-2886 22" Hose, 3/8" Female to Female FE ORF SWVL 22886 $28.52 7 155-2884 33" Hose, 1/4" Female to Female FE ORF SWVL 22884 $27.98

Fittings and Couplers

4

Hoses

1314


7 155-0365 Pin Style Coupler, 3/4-16 Male on valve block 22293 $18.50 8 155-0366 Pin Style Coupler, 3/4-16 Female on valve block 22294 $28.48 9 155-0377 Pin Style Quick Coupler Set, 1/4 NPT Male/Female $10.76 10 155-0367 Rigid Elbow, 90 Degree for 155-0366 22295 $22.26 11 324-0122 Dust Plug, 2 pc. set $6.98

7 8

Couplers "Pin Style" Compatible with low spill couplers

1/4"NPT9/16-18

22 23

24 25

O-Ring

5

We don't recommend using Teflon® Tape on pipe thread joints. Tape will eventually break down and contaminate your system. Instead use a Liquid Teflon Pipe Joint Compound. We carry #31229 $3.42/1oz.

31229$3.42/1oz.

To Drivers Side Ram

To Passenger Side Ram


10

11Two Piece Set

NEW

NEW

6

7


18

MillSupply.com

Slick Stick Access.

Slick Stick Kit

Solenoid


16 155-0605 Motor Solenoid - 3 Post 15370 $9.74

17 155-0607 Motor Solenoid - 4 Post 15370 $28.94


10 155-0710 Slick Stick Kit (less harness) 08574 $97.94 11 155-0715 Harness Only for Slick Stick 15680 $93.48 12 155-0720 Switch Only for Slick Stick 22092 $73.44 13 155-0721 Decal for Single Lever Control 22090 $3.68 14 155-0725 Slick Stick Bracket Only 15673 $3.08 LOC. - Location on Drawing — N.I. - Not illustrated

Slick Stick Switches

10

11

12 1314

16 17


1 155-0610 Angle Switch for E-47 21918 $28.17 1 155-0615 Lift Switch for E-47 21919 $28.17 2 155-0635 Yellow Handle (each) 15375 $1.88 3 155-0640 Black Handle (each) 15376 $1.88 4 155-0630 Fuse & Harness Assy, for E-47 15478 $60.10 5 155-0620 Switch Plate (without Switches) 15656 $26.71 6 155-0730 Bullet Terminals to repair plow harness & coil ends, set of 3 $5.25 LOC. - Location on Drawing — N.I. - Not illustrated

Switches and HarnessesToggle Lift and Angle Switches

21A

1

Set of 3

Made with shrink tubing

Membrane Switch


18 155-3047 Snowplow hand controller, Straight Blade 23047 $220.20 18 155-3037 Snowplow hand controller, V-Blade 23037 $220.20 20 22690 Pistol Grip Controller w/Adapter & Diode 22690 $328.18 21A 22717 Adapter for Pistol Grip Controller 22717 $18.91 21B 15059 Diode for Motor Solenoid, Touch Pad & Pistol Grip 15059 $15.57 22 155-0626 Membrane Switch, has square plug 22154 $176.26 (155-0631 Adapter needed to convert to round plug) 24 1306901 Hand Held Remote, Straight Blade Plows, Sq. Plug 22154 $199.50 25 155-0632 Harness for Membrane Switch, fits Classic 15764 $99.95 (fits rectangular plug style switch) 25 155-0629 Harness for Membrane Switch, fits Classic 15725 $99.05 (fits round plug style switch) 26 160-77737 Harness with square plug, plow side, fits Plus 22262 $198.09 Single wire coil 26B 160-77736 Weather cover, hydraulic side, fits 160-77737 $7.78 27 160-77738 Harness with square plug, vehicle side, fits Plus 22261 $196.28 Short 36" wire harness 27B 160-77720 Weather cover, vehicle side, fits 160-77738 $6.00 26 160-77396 Harness with square plug, plow side, 22604 $177.18 fits Plus Deutsch coil connectors 28 160-77389 Harness with square plug, vehicle side, 22610 $221.48 From controller to pump harness. Fits # 20, 22 & 24 controllers

30 160-77307 Harness with round plug, plow side, 20 pin 22692 $185.86 Has trailer style plug & Deutsch coil connectors, fits Plus E58H 31 160-77308 Harness with round plug, vehicle side, 20 pin, Plus 22691 $275.22 Has trailer style plug. From controller to pump harness, only Pistol Grip Has replaceable pin ends, see part 160-01576 32 160-91797 Bracket kit for round plug 08202 $55.63 33 160-84087 Coil adaptor harness. Converts single wire coil 15912 $34.49 harness to Deutsch coil 34 160-01576 Replacement pins on truck side for 160-77308 8423 $104.61 LOC. - Location on Drawing — N.I. - Not illustrated

Pistol Grip Controllers

2 34

5

6

20

22

2627

28

24

25

30 31

32

3334

21B

ShownInstalled

15059

26B

27BWeather

Cover

WeatherCover

18

NEWNEWNEWNEW

Avail Dec.

Avail Dec.

NEWNEW


19

800-888-5072

Quick Disconnect Cables

LOC. PART NO. DESCRIPTION REPLACES OEM# PRICE QUICK DISCONNECT BATTERY CABLES Kit 155-0680 Cable Kit with Single Ground $57.43 Includes: 155-0660, 155-0665, 155-0670, 155-0675

Kit 155-0685 Cable Kit with Dual Ground $62.16 Includes: 155-0660, 155-9910, 155-0670, 155-0675

1 155-0645 Connector for Side Post Battery 21976 $2.04 2 155-0660 Power Cable 36", hardwire (Red) 05024 $8.67 3 155-0665 Cable and Plug Assy. 15670 $15.93 4 155-9910 Cable & Plug Assy. for 155-9885 15811 $19.47 double stud motor

5 155-0670 Power Cable 63", quick disconnect (Red) 15671 $18.69

6 155-0675 Ground Cable 53", quick disconnect (Black) 15672 $17.77

HARD WIRE BATTERY CABLES 7 256-0540 Ground Cable 60" (Black) 55984 $15.75 8 256-0543 Battery Cable 60" (Red) 25635 $15.00 9 256-0545 Battery Cable 22" (Red) 22511 $13.00 10 43-029 AGC® Fuse tap-in $0.20 ea 11 43-028 ATC® / ATO® Fuse, .250 tap-in $0.28 ea

6

Hard Wire Cables

Wiring Diagram

SWITCHES

MOTOR SOLENOID

PUMP ASSEMBLY

BATTERY

To pump ground

To motor

A Coil (Black)

B Coil (Red)

C Coil (Green)

To Motor Solenoid

Motor Solenoid (White)

FUSE BOX

(Black or Blue Fused Wire) Connect to fuse that ishot only when ignition is on

For Membrane Switch and Pistol Grip, Orange wire to ground

Part No. 155-0665 quick disconnect battery cables mounts to the motor and ground on the pump assembly. Requires 155-0670 and 155-0675 cables.

Shown mounted on an E-47 Pump assembly.

7 8

Fuse taps

9

10

For fuse tap-ins see pictures 10 and 11 to left

11

Pistol Grip

Touch Pad is no longer available.

1 2 3

4

5

Membrane Switch

Cables, Battery Connector and Plug Assembly

09880 - Dielectric Grease, 5 gram (Single use pouch) Provides a moisture-proof barrier that lubricates and protects electrical equipment from salt, dirt and corrosion. $1.79



20

MillSupply.com

LOC. - Location on drawing N.I. - Not illustrated * Parts included in Master Seal Kit

When Angling

Left only the

Motor Runs


1 155-9801 E-58H ELECTRO LIFTTM POWER UNIT (replaces E47 & E57) 15995 $2,089.57

N.I. 159-0701 Valve Assy with coupler, 12V 15967 $917.08

1C 155-9802 E-57 Retro Fit Kit; Motor, Pump, Studs & O-rings# 70 & 79 15869 $368.95

N.I. 155-0818 Bolt to install E-57 Retro Fit Kit (three required) 22339 $3.08

2 155-0802 "A" Solenoid Valve Assy, uses 3/8" wrench size, black wire 15356 $54.47

3 155-0803 "A" Coil, uses 3/8" wrench size, black wire 15392 $12.99

4 155-0804 "A" Valve, used with 155--0803 15393 $37.16

N.I. 155-0805 "A" Solenoid Valve Assy, uses 1/2" wrench size, black wire 15661 $84.74

N.I. 155-0806 "A" Coil, uses 1/2" wrench size, black wire 15659 $14.86

N.I. 155-0807 "A" Valve, used with 155-0806 15660 $69.90

N.I. 155-0808* "A" Seal Kit 15431 $4.32

6 155-0812 "B" Solenoid Valve Assy, red wire 15357 $95.40

7 155-0813 "B" Coil, Red Wire 15382 $16.57

8 155-0814 "B" Valve 15380 $79.14

N.I. 155-0815* "B" Seal Kit 15432 $6.25

N.I. 155-0816 "B" Solenoid Ball & Spring Kit 15576 $9.71

13 155-0820 "C" Solenoid Valve Assy, green wire 15358 $82.58

14 155-0821 "C" Coil, Green Wire 15430 $18.41

15 155-0822 "C" Valve Cartridge 15381 $81.90

N.I. 155-0823* "C" Seal Kit 15433 $8.76

16 155-0655 Crossover Valve Kit 15606 $52.00

16 159-0774 Crossover Valve Kit, One Piece Design 15974 $100.59

N.I. 155-0830* Crossover Seal Kit, 15610 $6.82

Includes seals denoted with " ** " on drawing

N.I. 155-0831* Seal Kit, Includes seals denoted with " *** " on drawing 15254 $18.95

N.I. 155-0832 Master Seal Kit (denoted with a " * " following the Part No.) 15456 $28.12

20 155-0833 Pilot Check Valve Kit (ball,spring,plug) 15639 $52.54

21 155-0835 Piston 15609 $34.39

22 155-0836 Plug, Valve Block 15359 $30.05

Angl

e Ri

ght

Ra

ise

Lo

wer

& F

loat

155-9480 - DIPSTICK AND FUNNEL KITAccurately fill and check hydraulic oil in your E-47/57/58 or E-60 pump. $4.20

Need your plow pump repaired? Look-up www.plowpumpservice.com on the web.

The replacement parts listed for the motor (50) and the pump assembly (66) are for the E-47 only. All other parts shown will fit the E-47 and E-57. A retro fit kit is available to convert your pump to an E-57. (Part #155-9802)This kit will increase the speed of your pump assembly.

Parts fit all E-47, E-47H, E-57, E-57H units unless noted

51

54A

Double Stud motor only fits 155-9804 Pump assembly

The complete E-47 & E-57 units are no longer available. All complete units are now replaced with the E-58H.

NLA1 Motor

Installation Tip - See Below

Motor Installation TipWhen installing motor it is important to keep the cap of the motor in its place. The best way to do this is tape it down BEFORE undoing the bolts. Otherwise brushes will become unset in their holder. If brushes become unset purchase our tool, KA-373. Place the cap, brushes up. Hold down the brushes with the tool, then place the motor over the cap and slide out the tool. Brushes are now reset correctly.

KA-373 Installation Tool $4.95

1C

For E-58H Parts See Page 22

Application for: MEYER® E-47,E-47H & E-57,E-57H Pumps


21

800-888-5072

LOC. - Location on drawing N.I. - Not illustrated *Parts included in Master Seal Kit


23* 155-0837 O-Ring 9/16 I.D. 15126 $0.57

24 155-0838 5/16" Nyltite Seal 21929 $0.79

25 155-9838 RAM ASSEMBLY Complete 15335 $154.69

Includes 26,27,28,29,30,32 (Fits E46, E47 & E57)

26 155-0839 Ram Electro Touch, 6" stroke (Fits E46, E47 & E57) 15208 $34.65

26 155-0840 Ram Electro Touch, 8" stroke, (Fits E47H & E57H) 15206 $39.95

27 155-0841* O-Ring 7/16 I.D. 15125 $1.17

28 155-0842 Piston 15158 $40.06

29 155-0843 Piston Follower 15219 $33.37

30 155-0844* Packing Cup 15162 $6.39

31 97-542P 5/16-24 Nylon Lock Nut for stud, each $0.13

32 M-1689-P Locknut, 1/2"-13 20316 $0.56

34 155-0859 Cover Kit (Top Cap Kit) Incl: 24, 31, 35, 40 & 41 $29.50

35 155-0855 Cover and Wiper Assy. Incl: 35, 36, 37 & 38 15194 $18.93

36 155-0856 Wiper 05119 $2.58

37 155-0857* O-Ring 3-1/2" I.D. 15131 $2.18

38 155-0858 Sleeve 15199 $8.89

40 155-0650 Pressure Relief Valve w/Bushing 08473 $6.01

41 155-0860* 1-1/8" I.D. O Ring 15198 $1.92

42 155-0861 Washer 15209 $7.78

44 155-0862 Cylinder (Fits E46, E47 & E57) 15207 $70.11

44 155-0852 Cylinder (Fits E47H & E57H) 15205 $82.35

45 155-0863* O-Ring, 1-15/16" I.D. 15163 $1.49

46 155-0864 Cylinder Tank, 6-1/8" Tall (Fits E46, E47 & E57) 15045 $70.11

46 155-0854 Cylinder Tank, 8-1/8" Tall (Fits E47H & E57H) 15204 $75.67

47 155-0865 Stud (Fits E46, E47 & E57) 15042 $5.01

47 155-0867 Stud (Fits E47H & E57H) 15203 $4.44

50 MM-054 MOTOR BOSCH TYPE (Fits E46, E47 & E47H ) 15054 $73.70

51 155-9885 DOUBLE STUD MOTOR (Fits E57 & E57H) 15727 $96.35

Motor fits 155-9804 pump assembly N.I. 155-0972 Brush Kit, fits double stud Iskra motor 15854 $30.37

53 155-0876 Pump Shaft Seal for E47 Pump Assy. 15581 $3.76

54A 155-0874 Brush Kit Only, Bosch Type 15472 $11.95

55 155-0878 Gasket, Bosch Type 551G $0.86

56 155-0879 Drive End Cap & Bushing, Bosch Type 5001 $11.09

60 155-0880 BASE & STRAINER ASSEMBLY 15573 $230.84

62 155-0881 Filter Kit 1/2" 15620 $10.63

63 155-0882 Filter 15619 $3.99

64 155-0883 Plug with 1/2" O-Ring, 5/8" Hex 21827 $4.81

64 155-0886 Plug with 9/16" O-Ring, 11/16" Hex 21999 $4.44

N.I. 155-9804 PUMP ASSEMBLY (Fits E57 & E57H) 15889 $291.59

69 155-0888 Pump Check Valve (O-Ring*, Seat, Ball, Spring) 15574 $16.68

70 159-0724 O-Ring 3/8" I.D. (fits 155-0888) 15124 $2.99

75 155-0889* O-Ring 1/4" I.D. 15122 $0.26

77 155-0890 Strainer 15326 $6.10

78 155-0891 Pump Stud (Fits E-46, E-47 & E-47H), 1 stud 15043 $2.97

79 155-0892* O-Ring 5/8" I.D. 15127 $0.36

81 155-0893 Baffle 15621 $8.89

N.I. 159-0781 Retaining Ring above Baffle 21980 $3.08


88 155-0895 “C” Solenoid Check Valve Kit 15577 $11.12

92 155-0896 Pilot Check Valve Kit 15575 $12.57

WARNINGWhen doing any repairs on plow DO NOT stand between vehicle and plow or stand near leading edge of plow.

Troubleshoot and Maintain your Meyer Pump with this

Mechanics Kit155-9485 - Includes the tools shown below and an easy to follow flow chart. $175.70

E-Z TEST HARNESSAllows one man to do magnetism checks, pressure checks and see plow movement from outside the vehicle.

PRESSURE GAUGEChecks pressure of pump and crossover relief pressure.

MOTOR BRUSH TOOLInstalling E-47 Bosch Motor brushes is a snap.

CIRCUIT TESTERQuickly check switch and harness func-tion, battery current to plow motor and solenoid.

DIPSTICK & FUNNELAccurately fill and check hydraulic oil in your E-47/57/58 or E-60 pump.

Application for: MEYER® E-47,E-47H & E-57,E-57H Pumps

Service Manual for E-46, 47 & 57 Electro-Lift

Power Units

Part No. 155-9947 $7.49

Parts fit all E-47, E-47H, E-57, E-57H units unless noted

TIP - Remove unit from vehicle in the off season and store in basement. Raise ram all the way up and coat exposed ram with grease.



22

MillSupply.com

1

155-9759Custom Molded Cover $47.00155-9760Lift Cover Strap $11.04Both parts are neededfor the cover. Each sold separately.


1 155-9801 E-58H ELECTRO LIFTTM POWER UNIT 15995 $2,089.57 2 155-9802 Motor and Pump 15869 $368.95 3 155-9885 DOUBLE STUD MOTOR only (Fits E57, E57H & E58H) 15727 $96.35 N.I. 155-0972 Brush Kit, fits double stud Iskra motor 15854 $30.37 4 155-9804 PUMP ASSEMBLY only (Fits E57, E57H & E58H) 15889 $291.59 6A 159-0701 E58H/E78 Valve Assy with coupler, 12V 15967 $917.08 6B 159-0702 E68/E88 Valve Assy with coupler, 12V 15941 $1,040.61 7 159-0745 Coupler, Female half 22445 $40.07 8 159-0742 Coupler, Male half 22442 $32.03 9 159-0874 Pump Relief Valve Assembly 15874 $105.72 N.I. 159-0769 Master Seal Kit (In kit with '*' following part number) 15969 $40.20 (Includes parts on this page & the following page)

N.I. 155-0831 Basic Seal Kit, (In kit with '+' following part number) 15254 $18.95 (Includes parts on this page)

31 97-542P 5/16-24 Nylon Lock Nut for stud, each $0.13 34 155-0859 Cover Kit (Top Cap Kit) Incl: 31, 35, 40, 41, 43 $29.50 35 155-0855 Cover & Wiper Assembly. Incl: 36, 37 & 38 15194 $18.93 36 155-0856*+ Wiper 05119 $2.58 37 155-0857*+ O-Ring, 3-1/2" I.D. 15131 $2.18 38 155-9858 Sleeve 15737 $9.10 40 155-0650 Pressure Relief Valve w/Bushing 08473 $6.01 41 155-0860*+ 1-1/8" I.D. O-Ring 15198 $1.92 42 155-0861 Washer (grooves down) 15209 $7.78 43 155-0838*+ 5/16" Nyltite Seal 21929 $0.79 44 155-0852 Cylinder (Fits E47H , E57H & E58H) 15205 $82.35 45 155-0863*+ O-Ring, 1-15/16" I.D. 15163 $1.49 46 155-0854 Cylinder Tank, 8-1/8" Tall 15204 $75.67 (Fits E47H, E57H & E58H)

47 155-0867 Stud (Fits E47H, E57H & E58H) 15203 $4.44 48 155-0893 Baffle 15621 $8.89 49 159-0781 Retaining Ring above baffle 21980 $3.08 53 159-0777 Pump Shaft Seal 15877 $10.01 54 159-0773 Pump Stud 15973 $3.94 60 159-0780 BASE & STRAINER ASSEMBLY 15980 $228.79 61 155-0890 Strainer 15326 $6.10 63 155-0882 Filter 15619 $3.99 64 155-0886 Plug w/O-Ring 9/16" 21999 $4.44 66 155-0888 Pump Check Valve (O-Ring*, Seat, Ball, Spring) 15574 $16.68 67 159-0724*+ O-Ring 3/8" I.D. (fits 155--0888) 15124 $2.99 68 155-0889*+ O-Ring 1/4” I.D. 15122 $0.26 69 155-0892*+ O-Ring 5/8" I.D. 15127 $0.36 70 155-0840 Ram, 8" stroke (Fits E47H, E57H & E58H) 15206 $39.95 71 155-0841*+ O-Ring 7/16 I.D. 15125 $1.17 72 155-0842 Piston 15158 $40.06 74 155-0843 Piston Follower 15219 $33.37 73 155-0844*+ Packing Cup 15162 $6.39 75 159-0760 Spacer 15760 $6.90 76 M-1689-P Locknut, 1/2"-13 20316 $0.56 80 160-84087 Coil adaptor harness. Converts single wire coil 15912 $34.49 harness to Deutsch coil

155-9480DIPSTICK

AND FUNNEL KITAccurately fill and check

hydraulic oil in your E-47/57/58 or E-60 pump.

$4.20

Service Manual for E-58, E68, E78, E88

Power Units

Part No. 155-9958 $7.49

80

E-58H Meyer Hydraulic Custom Molded Lift Cover & Lift Cover Strap protect your unit from the harsh elements. Designed for durability and functionality the sub-zero composite fits snugly over the hydraulic unit for maximum protection. All unit maintenance and feature functions can be accessed conveniently while the cover is on. Fits Meyer E-58H Hydraulic units only. Must order Lift Cover Strap (155-9760) when ordering cover.

Custom Custom Molded Molded

Lift CoverLift Cover

Application for: MEYER® E-58H/E68 E78/E88 Pumps



23

800-888-5072

MEYER® E68/E88 Valve Block

DISMO

UNT

E

LEFTD

B

LOC. PART NO. DESCRIPTION REPLACES OEM # PRICE

10 159-0716 Coil for A, B, C, D, and E 15916 $47.30 11 159-0717 "A" (E58/78) Valve, 5/8" stem 15917 $78.30 12 159-0728* "A" Seal Kit 15928 $17.80 10 159-0716 Coil for A, B, C, D, and E 15916 $47.30 11 159-0717 "B" (E68/88) Valve, 5/8" stem 15917 $78.30 12 159-0728* "B" Seal Kit 15928 $17.80 17 159-0759 "B" Check Valve Kit 15959 $138.40 10 159-0716 Coil for A, B, C, D, and E 15916 $47.30 15 159-0718 "C" Valve, 5/8" stem (E68 & 88) 15918 $76.00 12 159-0727* "C" Seal Kit (E68 & 88) 15929 $20.03 10 159-0716 Coil for A, B, C, D, and E 15916 $47.30 15 159-0718 "D" Valve, 5/8" stem (E68 & 88) 15918 $76.00 12 159-0727* "D" Seal Kit (E68 & 88) 15929 $20.03 10 159-0716 Coil for A, B, C, D, and E 15916 $47.30 19 159-0729 "E" Valve (E68 & 88) 15919 $103.89 21 159-0730* "E" Seal Kit (E68 & 88) 15930 $24.48 24 159-0750 Needle Valve Kit, (Lower adj.) 15950 $86.44 25 159-0765 Dual PO Check Valve Kit 15965 $280.46 26 159-0751 P.A. Block Filter Kit 15951 $50.40 30 159-0774 Crossover Valve Kit 15974 $100.59 32 159-0926 Soc. Head bolt, 5/16-18 x 1-1/2” 21826 $3.08

A

DOW

NUP

RIG

HTC

RIG

HTRI

GHT

C

C

UPUP

B

B

DOW

NDO

WN

A

A


10 159-0716 Coil for A, B, and C 15916 $47.30 11 159-0717 "A" (E58/78) Valve, 5/8" stem 15917 $78.30 12 159-0728* "A" Seal Kit 15928 $17.80 10 159-0716 Coil for A, B, and C 15916 $47.30 15 159-0718 "B" Valve, 5/8" stem 15918 $76.00 12 159-0727* "B" Seal Kit 15929 $20.03 17 159-0759 "B" Check Valve Kit 15959 $138.40 10 159-0716 Coil for A, B, and C 15916 $47.30 20 159-0758 "C" Valve, 5/8" stem (E58H & E78) 15958 $130.40 21 159-0730* "C" Seal Kit (E58H & E78) 15930 $24.48 24 159-0750 Needle Valve Kit, (Lower adj.) 15950 $86.44 25 159-0765 Dual PO Check Valve Kit 15965 $280.46 26 159-0751 P.A. Block Filter Kit 15951 $50.40 30 159-0774 Crossover Valve Kit 15974 $100.59 32 159-0926 Soc. Head bolt, 5/16-18 x 1-1/2” 21826 $3.08

MEYER® E58H/78 Valve Block


87 159-0740 Coil for E-58H New Block A, B, C 15118 $62.55 83 159-0734 "A" Cartridge Valve for E-58H New Block 15146 $68.20 87 159-0740 Coil for E-58H New Block A, B, C 15118 $62.55 82 159-0733 "B" Cartridge Valve for E-58H New Block 15117 $186.97 84 159-0735 "B" Check Valve Kit for E-58H New Block 15142 $14.45 87 159-0740 Coil for E-58H New Block A, B, C 15118 $62.55 81 159-0731 "C" Cartridge Valve for E-58H New Block 15111 $84.26 85 159-0737 Dual P.O. Check Valve for E-58H New Block 15148 $158.49 86 159-0739 Crossover Valve for E-58H New Block 15179 $198.09 88 159-0741 Lower Adjustment Valve for E-58H New Block 15165 $70.11 89 159-0926 Socket Head Bolt, 5/16-18 x 1-1/2" 21826 $3.08

MEYER® E58H New Valve Block



24

MillSupply.com

Angl

e Ri

ght

R

aise

Low

er &

Flo

at

"A" Coil 155-0819New Square Design


1 155-9801 E-58H ELECTRO LIFTTM POWER UNIT (replaces E-60,E60H) 15995 $2,089.57

N.I. 159-0701 Valve Assy with coupler, 12V 15967 $917.08

2 155-0802 "A" Solenoid Valve Assy, uses 3/8" wrench size, black wire 15356 $54.47

3 155-0803 "A" Coil, uses 3/8" wrench size, black wire 15392 $12.99

4 155-0804 "A” Valve, used with 155-0803 15393 $37.16

N.I. 155-0805 "A" Solenoid Valve Assy, uses 1/2" wrench size, black wire 15661 $84.74

N.I. 155-0806 "A" Coil, uses 1/2" wrench size, black wire 15659 $14.86

5 155-0819 "A" Coil, Square Design, plastic, uses 1/2" wrench size 15905 $61.33

N.I. 155-0807 "A" Valve, used with 155-0806 & 155-0819 15660 $69.90

N.I. 155-0808* "A" Seal Kit 15431 $4.32

6 155-0812 "B" Solenoid Valve Assembly, Red Wire 15357 $95.40

7 155-0813 "B" Coil, Red Wire 15382 $16.57

8 155-0814 "B" Valve 15380 $79.14

N.I. 155-0815* "B" Seal Kit 15432 $6.25

N.I. 155-0816 "B" Solenoid Ball & Spring Kit 155-76 $9.71

13 155-0820 "C" Solenoid Valve Assembly, Green Wire 15358 $97.15

14 155-0821 "C" Coil, Green Wire 15430 $18.41

15 155-0822 "C" Valve 15381 $81.90

N.I. 155-0823* "C" Seal Kit 15433 $8.76


N.I. 159-0774 Crossover Valve Kit, One Piece Design 15974 $100.59

N.I. 155-0830* Crossover Seal Kit 15610 $6.82

Crossover seal kit Includes seals denoted with " ** " on drawing

External Drop Speed Adjustment

Kit - see below

The complete E-60 & E-60H units are no longer available. All complete units are now replaced with the E-58H.

NLA

1

Application for: MEYER® E-60, E-60H Pumps

EXTERNAL ADJUSTMENT KITEasily adjust the drop speed of

your Meyer E-60 unitIf your truck is equipped with a Meyer E-60 unit and the blade floats like a feather or drops like a rock when you are lowering your plow, then you need this new external adjustment kit from Mill Supply. Over time the factory adjustment screw in the Meyer E60 units turns by itself increasing or decreasing your drop speed without you knowing. You could adjust it one week and the next week it could be back to the way it was. Or if you are tired of the lower adjustment procedure - remove plug, adjust screw, reinstall plug, try plow, still not right, remove plug, adjust screw, reinstall plug, try plow, still not right...... With this new adjustment kit you can adjust the drop speed externally and then lock it down so it won’t change again saving you time and also not waking your customers when the blade hits the ground so fast it breaks ice. This kit does not correct 'Drifting' which is a condition where the plow lowers itself as you drive.

155-9495 - External Adjustment Kit $39.90

155-9480DIPSTICK AND FUNNEL KITAccurately fill and check hydraulic oil in your E-47/57/58 or E-60 pump. $4.20

For E-58H Parts See Page 22

Troubleshoot and Maintain your Meyer Pump with the Tools

shown on page 21

5

When Angling Left only the Motor Runs



25

800-888-5072


N.I. 155-0931 Master Seal Kit (denoted with a "*" following the Part No.) 15705 $29.47

N.I. 155-0932 Standard Seal Kit. Includes all seals to rebuild lift ram and 15707 $21.48

reservoir. Also includes pump shaft seal

17 256-0370 Rigid Elbow, Tall, Male ends 21857 $4.25

17A 155-0367 Rigid 90 Degree Elbow, Female/Male ends 22295 $22.26

18 256-0365 Rigid Elbow, Short, Male ends 22141 $2.86

20 155-0833 Pilot Check Valve Kit 15639 $52.54

21 155-0835 Piston 15609 $34.39

22 155-0836 Plug, Valve Block 15359 $30.05

23 155-0837* 9/16 I.D. O-Ring 15126 $0.57

24 155-0838* 5/16" Nyltite Seal 21929 $0.79

25 155-0940 RAM ASSEMBLY Complete (Fits E60) 15706 $154.69

26 155-0839 Ram, Electro Touch, 6" stroke (Fits E60) 15208 $34.65

26 155-0840 Ram, Electro Touch, 8" stroke, (Fits E60H) 15206 $39.95

27 155-0841* 7/16 I.D. O-Ring 15125 $1.17

28 155-0942 Piston 1-1/4" Diameter (Fits E60) 15690 $40.06

28 155-0842 Piston, 1-3/4" Diameter (Fits E60H) 15158 $40.06

N.I. 155-0843 Piston Follower (Fits E60H) 15219 $33.37

29 155-0943* Packing Cup. 1" I.D., 1-1/4" O.D. (Fits E60) 15691 $9.38

30 155-0844* Packing Cup. 5/8 I.D., 1-3/4" O.D. (Fits E60H) 15162 $6.39

31 155-0945 Washer 15692 $3.08

31A 97-542P 5/16-24 Nylon Lock Nut for stud, each $0.13

32 M-1689-P Locknut, 1/2"-13 20316 $0.56

34 155-0859 Cover Kit (Top Cap Kit) Incl: 24, 31A, 35, 40 & 41 $29.50

35 155-0855 Cover & Seal Assembly. Incl: 36, 37 & 38 15194 $18.93

36 155-0856* Wiper 05119 $2.58

37 155-0857* 3-1/2" I.D. O-Ring 15131 $2.18

38 155-9858 Sleeve (Fits E60) 15737 $9.10

40 155-0650 Pressure Relief Valve w/Bushing 08473 $6.01

41 155-0860* 1-1/8" I.D. O-Ring 15198 $1.92

42 155-0861 Washer 15209 $7.78

44 155-0963 Cylinder Kit, Upgrades 1-1/4" Cylinder to 1-3/4" Cylinder 08839 $124.34

(Includes cylinder, piston & follower) (Fits E60)

44 155-0852 Cylinder only, 1-3/4" I.D. (Fits E60H) 15205 $82.35

45 155-0964* O-Ring, 1-1/2" I.D. (Fits E60) 15693 $2.16

45 155-0863 O-Ring, 1-15/16" I.D. (Fits E60H) 15163 $1.49

46 155-0965 Cylinder Tank, 3-1/2" Tall (Fits E60) 15696 $44.50

46 155-0955 Cylinder Tank, 5-1/2" Tall (Fits E60H) 15704 $93.48

47 155-0966 Stud (Fits E60) sold each 15708 $4.45

47 155-0956 Stud (Fits E60H) sold each 15709 $5.55

50A 155-9885 PUMP MOTOR 12V, Double Stud, Iskra Design 15727 $96.35

N.I. 155-0972 Brush Kit (Fits double stud Iskra motor) 15854 $30.37

N.I. 155-0970 Motor Plate Cover w/tabs for 155-9885 double stud motor 15831 $84.44

53 155-0974* Pump Shaft Seal 15686 $3.43

54 155-0975* O-Ring 4-3/4" I.D. 15687 $1.12

60 155-0978 SUMP BASE 15726 $344.22

61 155-0980 Plug with O-Ring, 9/16" 22129 $4.37

63 155-0882 Filter 15619 $3.99

64 155-0886 Plug with O-Ring, 9/16" 21999 $4.44

66 155-0987 Pump 15729 $160.32

68 155-0989 Locator 15713 $3.08

69 155-0888 Pump Check Valve (O-Ring*,Seat,Ball,Spring) 15574 $16.68

70 159-0724 O-Ring, 3/8" I.D. (Fits 155-0888) 15124 $2.99

75 155-0990* 3/8" I.D. O-Ring 15700 $0.53

76 155-0991 Ball Seat 15702 $5.55

77 155-0871 Relief Valve 15699 $22.26

78 155-0993* Pump O-Ring 15701 $0.38

80 155-0995 Pump Mounting Plate 15703 $49.19

82 155-0889* 1/4" I.D. O-Ring 15122 $0.26

83 155-0997* 5/16" I.D. O-Ring 15123 $0.49 LOC. - Location on drawing N.I. - Not illustrated * Parts included in Master Seal Kit

1717A

18

Service Manual for Meyers E-60

Quik-LiftTM Pumps

Part No. 155-9960 $5.60

Application for: MEYER® E-60, E-60H Pumps

155-9885Double Stud Motor

50A

Mill Supply's Double Stud Motor (155-9885) eliminates the motor ground problem on the E-60 units. With the single stud motors your ground attaches to the aluminum sump base and has to travel through the base to the motor. With this new Double Stud Motor, the ground attaches directly to the motor allowing it to run more efficiently.

This motor also has two holes in the end cap so whether you are replacing the single stud motor or the double stud motor you can always have the drain face down.

Brushes are easier to change

D2+

D1-


26

MillSupply.com

Solenoid Check - To check your "A", "B" and "C" solenoid coils for magnetism use a screwdriver by placing it on the nut securing the coil. You should feel a strong magnetic pull when the switch is operated.

TROUBLESHOOTING for MEYER® E-46, E-47, E-57 and E-60 ELECTRO-TOUCHTM UNITS

These tips are suggestions only and will not solve all problems related to the Meyer pumps. This is not a substitute for a factory trained person with experience.

NOYES

YES NO

YES

NO

NOYES

NOYES

NOYES

YES

NOYES

YES

NOYES

PLOW WILL NOT RAISE

Check "B" valve O-rings, or replace "B" valve.

Replace "B" coil.

Replace Motor Solenoid

Is there power to the raise switch?

Check, clean and tighten all electrical connections. Check the battery and connections. Check for shorts in all wires.Check the fuse.Is there power to the motor solenoid? (white wire)

Replace the raise switch.

Check Oil Level. Is oil level 1-1/2" from top cap?

Add oilDoes the snow plow angle left instead of raising? Check "A" valve. Check for

clogged filters. Check the pump shaft and motor armature. They should turn freely. Repair or replace as necessary.

Does the "B" coil (red wire) have magnetism?

Is there power to the "B" coil?

Replace the harness.

Is there power leaving the switch at the black wire?

Are the wires plugged into the switch?

Replace the raise switch.

Does the Motor Operate?

Is there power to the motor?

Repair or replace motor.

See page 20 for Dipstickand Funnel

PLOW WILL NOT LOWERDoes the "A" coil (black wire) have magnetism?

Is there power to the "A" coil?

Replace"A" coil.

YES NO

NOYES

Is there power leaving the switch at the black wire?

Replace "A" valve.If it still does not lower check for a clogged filter or a blocked passageway. Also check for a bent or seized ram. Replace wire

harness.

YES

Check fuse. If fuse is bad, check for shorts in wire harness, "A" coil". If fuse is good, replace switch.

Are the wires in the molded connector plugged into the switch?

YES

NO

These are the most common problems, the next step is disassembling the unit. If you are not familiar with disassembling the unit, we suggest taking to a qualified service technician.

A-Solenoid - Black Wire — B-Solenoid - Red Wire — C-Solenoid - Green Wire


27

800-888-5072

Can the snow plow raise?

See raise sectionDoes the motor run while angle switch is pushed?

Check white jumper wire connections in molded connector. If connected, replace angle switch.

Is there power to the motor solenoid? (white wire)Is there power to the switch?

Does the snow plow raise instead of angling?

Replace the "B" valve.

See left angle section above.

Is there power to the "C" Coil?

Replace"C" coil.

NO

NO

YES NO NO

Can the plow angle to the left?

Does the "C" coil (green wire) have magnetism?

NO

YES NO

YES

YES

YES

YES

PLOW WILL NOT ANGLE RIGHT

Can the snow plow raise?

See raise sectionDoes the motor run while angle switch is pushed?

Is there power to the motor solenoid? (white wire)Is there power to the switch?

Does the snow plow raise instead of angling?

YES

YES

NONO

Clean or replace the"C" valve.

Clean or replace the "B" valve.

NO

Check white jumper wire connections in molded connector. If connected, replace angle switch.

YES

NO

PLOW WILL NOT ANGLE LEFT

Are the "C" valve O-rings in good condition? Replace.— If this does not work replace the "C" valve. If you continue to have problems replace the quick disconnects.

Is there power leaving switch?

Are the wires plugged into the switch?

Replace harness.

YES

YES

NO

NOIf you are still experiencing problems you could have interference between the A-frame and Sector. If this still does not help, call a qualified service technician.

Replace switch.

TROUBLESHOOTING for MEYER® E-46, E-47, E-57 and E-60 ELECTRO-TOUCHTM UNITS

PLOW WILL NOT HOLD ANGLEAre the rams mushy and does the plow move 6" - 8"?

Bleed air from system and tighten gland nuts. Check all couplers and fittings for leaks.

Does the plow release from right angle only but holds left angle?

Replace "C" valve O-rings

NOYES

YES NO

Change pilot check ball and seat. If this does not work replace "C" valve O-rings.

Does plow drop straight down?

Check "A" valve O-rings. Replace if necessary. Check "A" valve, does it move freely? Replace if necessary. Does plow hold now?

NO

NO

YES

Does plow drop and angle left? If so, replace "B" check valve. If it still does not hold, replace "B" valve. If these steps do not work, replace the base.

PLOW LEAKS DOWN

Cleaning Tip - Kerosene is the best method for cleaning individual parts. To clean the system properly, the power angling rams must be emptied and flushed with fresh plow oil.

Have unit rebuilt.


28

MillSupply.com

FLUSHING OF ANGLING RAMSShould be done after pump has been rebuilt or if fluid is

contaminated or incorrect. • This applies to plows with one hose on pump and one hose on plow.• Units with two hoses on plow can use this same procedure. • Procedure does not work with every brand of plow.

1. With plow disconnected from truck, position plow with moldboard face down. (“A” frame up) 2. Connect angle hose and elbow together (or connect both hoses together).3. Angle plow manually all the way to the right (pull “A” frame to the right).4. Disconnect coupler. Using an extra coupler, couple opposing ends thus letting fluid come out of hose. If your unit has two hoses on plow, drain fluid from passenger side hose.5. Using an empty container, (i.e. milk jug, oil bottle) place drivers side hose in bottle and manually angle plow to the left. This forces old oil out of cylinder. Let all oil drain from hose.6. Both angling cylinders should now be empty. - See below if fluid is contaminated or incorrect.7. Remove extra coupler that was installed in step 4.8. Reinstall plow on truck and correctly connect hoses to pump.9. Make sure correct amount of fluid is in pump.10. Raise plow 2 inches off ground.11. Using control in truck, angle plow left and right a few times to refill cylinders. (See www.plowpumpservice.com for a remote switch harness for a "one-man-operation" for Meyer units)12. Lower plow and recheck fluid level in pump.

If fluid in angling rams is contaminated or incorrect you can also flush them in the following manner:

Once rams are empty (step 6), take a bottle with fresh plow fluid and put drivers side hose in bottle making sure hose is submerged. Now manually angle plow to the right. This sucks the new fluid into the ram. Remove the extra couplers that were installed in step 4 and connect the angling rams together. Now manually angle the plow left and right to flush both rams. Repeat starting with step 3 above.

DRAINING FLUID FROM PUMPShould be done before every season

For Meyer® E-47 units with drain plugs and all E-60 units

1. With ram in down position, remove filler plug from top of pump and then remove drain plug and let fluid drain out.2. Now manually pull lift arm up to remove oil from around lift ram. Push lift arm back down.3. Remove two filter plugs and remove and clean filters in kerosene. Collapsed filters should be replaced.4. Refill pump using low temperature plow fluid to within 1-½" from top.5. Operate plow up-down and left-right a few times and recheck fluid level with lift ram all the way down.• See box below

For E-47 units without drain plugYou will need an old hose, adapter and a spare female coupler

1. Purchase correct adapter. Part #47191 if you use 5/8" wrench to remove plugs. Part #47192 if you use 11/16" wrench to remove plugs.2. Install female coupler on end of hose. Other end of hose can be cut off leaving it about 24" long.3. With ram in down position, remove filler plug from top of pump and then remove plug and filter that is closest to the valve body.4. Install adapter with male coupler into this filter hole.5. Connect hose with female end of coupler to the adapter and hold other end in empty bottle.6. Have a partner operate the pump from inside the truck. (See www.plowpumpservice.com for a "one-man-operation" using remote switch harness). Fluid will be expelled into the bottle. CAUTION: Do not run pump for an extended amount of time without fluid in it.7. Now manually pull lift arm up to remove oil from around lift ram. Repeat step 6.8. Push lift arm back down.9. Remove other plug and filter and clean both in kerosene. Collapsed filters should be replaced.10. Refill pump using low temperature plow fluid to within 1-½" from top.11. Operate plow up-down and left-right a few times and recheck fluid level with lift ram all the way down.

NOTE• If your unit has never been serviced or has the incorrect fluid in it, it should be rebuilt to insure that all old fluid is out. See www.plowpumpservice.com• E-47 units hold about ¾ of a quart of fluid. E-60 units hold about 1-¾ quarts• Angling rams when emptied hold an additional ½ quart.

800-888-5072

Snow PlowSnow PlowParts & AccessoriesParts & Accessories

Manufacturer names, part numbers, and descriptions are used for reference purposes only. It is not implied that any part listed Manufacturer names, part numbers, and descriptions are used for reference purposes only. It is not implied that any part listed is the product of the original manufacturers or approved by any manufacturers. Prices subject to change without notice.is the product of the original manufacturers or approved by any manufacturers. Prices subject to change without notice. 2929

SNOW DEFLECTORSSNOW DEFLECTORS

THERMOPLASTIC SNOW THERMOPLASTIC SNOW DEFLECTORDEFLECTOR

RUBBER CUTTING EDGESRUBBER CUTTING EDGES

NON-STICK POLY SNOW PLOW LINERSNON-STICK POLY SNOW PLOW LINERS

153-0790 - Universal, Contoured Thermoplastic Snow Deflector, 3/16" x 8" x 108" with Fasteners. Must be shipped oversize because of length. Reg. $109.41 SALE PRICE $101.75

Mounts to plows with flat surfaces perpendicular to blade. Hardware included, drilling required. SALE

THRU12/31/20

• Red or YellowYellow Non Stick Liner• One size - 96" x 28"• Trims easily with aviation snips or sharp knife• Includes 9 top-edge mounting fasteners and silicone sealant• Your plow will look new again

153-9628 YellowYellow Plow Liner, 96" x 28" $39.50153-9630 Red Plow Liner, 96" x 28" $44.07

BOLT HOLES SLOTTEDFOR BLADE ADJUSTMENT

RUBBERAT REST

RUBBERPLOWING

EXTEND 1" FOR HARD PACKED ICEEXTEND 3" FOR LIGHT SNOW & SLUSH

STEEL RUNNERCARRIES WEIGHT

INVERTED STEELCUTTING EDGE

Bolts and Nuts for Rubber Cutting Edges155-9920 1/2" x 3-1/2" Carriage Bolt $0.80155-9921 1/2"-13 Nylon Lock Nut $0.24155-9924 5/8" x 4" Carriage Bolt $1.19M-1702 5/8"-11 Nylon Lock Nut $0.60

All edges are furnished with 3"-long slots for adjustment.

Up to 7-1/2' Plow Non Commercial

( 3 Springs or Less )

8' and Up Plows and 7-1/2' Commercial Plows

( 4 Springs or More )

6

7

8

9

5

Allow 14 Days for Fabrication of Custom Rubber Cutting EdgesCustom rubber cutting edges are non returnable & non cancelable

PRICE INCLUDESCUTTING TO LENGTH,

AND PUNCHING SLOTS

Rubber Cutting Edge Per Foot DESCRIPTION PRICE per FOOT

1" x 6" $21.20/ft. 1-1/2" x 8" $39.42/ft. 1-1/2" x 10" $51.98/ft.

Don't see the size you need? We can custom make your Rubber Cutting Edge!

Rubber cutting edges

eliminate rust stains on

cement

Popular on Municipal plow equipment that do roads and sidewalks with pavers

Used on • Side by Sides• Bombardier• Ventrac• mb• and others


5 155-9500 Deflector Kit, 96" X 9" 12896/7 $76.83 7 155-9505 Replacement Rubber, 96" x 9" X 3/8", for Deflector (155-9500) $45.04 6 155-9510 Deflector Kit, 120" x 9" 12898 $80.45 7 155-9515 Replacement Rubber, 120" x 9" x 3/8", for Deflector (155-9510) $56.53 6 1309025 Universal Super-Duty Deflector Kit, 120" x 12" X 1/2" rubber $97.84 7 1309030 Replacement rubber, 120" x 12" X 1/2", cut to size to use on all deflectors $74.11 8 1309096 96" x 9" x 3/8" Belted Rubber Snow Deflector, 13" hole spacing $103.31 8 1309120 120"L x 12" x 3/8" Belted Rubber Snow Deflector, 10.25" hole spacing $142.88 8 1309144 144"L x 12" x 3/8" Belted Rubber Snow Deflector, not drilled $153.41 9 155-9230 Top Deflector for SV 8.5' & 9.5' V-Plow 09230 $50.36

Rubber Cutting Edges offer great abrasion resistance, are more flexible, absorb impact, shock, and conform easily to pavement surfaces like brick pavers, cobblestone and other sensitive surfaces. They also

eliminate rust stains on cement.

NEWAvail Dec.

For Meyer® Plows (Includes Mounting Hardware)

PART NO. PLOW TYPE CUTTING EDGE SIZE REPLACES PRICE SALEB-08186 Two Meter 1" x 6" x 78" 08186 $174.08 $146.00B-08187 ST-78 1-1/2" x 8" x 78" 08187 $245.25 $229.00B-08188 ST-84 1-1/2" x 8" x 84" 08188 $264.00 $246.00B-08189 ST-90/C7.5 1-1/2" x 8" x 90" 08189 $302.40 $284.00B-08190 C-8 1-1/2" x 8" x 96" 08190 $302.40 $283.00B-08191 C8.5 1-1/2" x 8" x 102" 08191 $324.00 $303.00B-08192 HM-9 1-1/2" x 10" x 108" 08192 $518.50 $490.00B-08193 HM-10 1-1/2" x 10" x 120" 08193 $530.00 $501.00


Rubber cutting edges include a bolt & nut mount kit.

Manufacturer names, part numbers, and descriptions such as Diamond are used for reference purposes only. It is not implied that any part listed is the product of the original manufacturers or approved by any manufacturers. Prices subject to change without notice.

30

MillSupply.com

10

15

18

12

14 17

17A

Lift and Angle Cylinders and Pins


10 324-0125 Lift and Angle Cylinder, 1-1/2" x 10" 81700020 $106.00

N.I. 155-9275 Lift Cylinder, 1-1/2" x 6" 05984 $96.60

12 324-0133 1" Dia. x 4" Cylinder Pin 81900011 $6.14

14 324-0140 1" Dia. x 6" Cylinder Pin 81900015 $10.06

15 324-0118 1-3/16" Dia. x 9-1/2" Hinge Pin 81100031 $14.66

N.I. 324-0123 1-3/16" Dia. x 2-13/16" Trip Edge Pin 81100033 $12.51

17 315-0135 Connecting Pin Assembly w/spring & cotter $6.66

17A 315-0140 Spring for Connecting Pin 315-0135 $1.14

18 315-0181 Release Hook 81900013 $13.80

2 3

6

9

Blade Guides (For High Visibility Markers see page 8)

5

89

A set includes a Carriage Bolt with the Locknut


8 324-0105 Anti-wear shoe assembly 81100011 $38.36 1" shaft dia. x 3-5/16" Long

9 315-0120 7/16" Lynch pin $0.78

5

7

8

Cutting Edges - High Carbon Steel

Cutting Edge Bolts and Nuts


5 155-0070 Set of 6, 1/2" x 2" USS 08486 $5.92 used with two meter cutting edge

5 155-0080 Set of 12, 5/8" x 2-1/2" USS 08184 $17.95 used on 324-9005 / 324-9010 / 324-9015

Shoe Assembly and Parts


9 153-0065 Blade guide kit (pair) 811000095 $12.96

Torsion and Trip Springs


2 324-0110 RH Torsion spring 811000163 $29.82

3 324-0113 LH Torsion spring 811000162 $26.39

5 324-9143 Spring, double torsion 8110005 $33.90

6 155-9115 Trip spring, compact blade, 10" 12978 $22.18

7 155-9110 Trip Spring 07017 $14.00

8 155-0105 Eyebolt w/2 nuts and washer 09124 $3.84

6"

6" 6"

18"

3" 324-90055/8"

2

4

9" 3"

51"

3"9"3"9"

3/4"

3" 12"

6"

3" 324-9015

6"

3"

45"

9" 3"3"6"6" 3"6"

5/8"

6"3"

3

324-9010

Measurement

Cutting Edges are heavy and require extra shipping charges, please call.


LOC. PART NO. DIMENSIONS* NO OF HOLE REPLACES

PRICE SALE

N.I. 155-9005 78" x 6" x 1/2" 6 1/2" 09100 $97.00 $87.30 2 324-9005 18" x 6" x 1/2" 3 5/8" 81100233 $49.88 $45.00

3 324-9010 45" x 6" x 1/2" 8 5/8" 801100019 $88.00 $80.00

4 324-9015 51" x 6" x 1/2" 7 5/8" 901100020 $86.30 $79.92

HOLES SIZE OEM#


Manufacturer names, part numbers, and descriptions such as Diamond are used for reference purposes only. It is not implied that any part listed is the product of the original manufacturers or approved by any manufacturers. Prices subject to change without notice.

31

800-888-5072

3130

LOC PART NO. DESCRIPTION REG. PRICE

50 155-9450 Hydraulic Fluid, 1 Quart SALE $5.95 $8.61/qt.

50 155-9460 Hydraulic Fluid, 1 Case (12 Quarts) SALE $59.00 $80.75/case

24 25 26

27 28

Hoses


36 MM-054 3" Motor 15054 $73.70 37 155-9885 4.5" Motor, twin post 15689 $96.35 38 155-0605 Motor Solenoid 15370 $9.74 39 155-0645 Battery Connector 21976 $2.04 40 155-0610 Angle Switch (E-47) 21918 $28.17 40 155-0615 Lift Switch (E47) 21919 $28.17 41 155-0635 Yellow Handle, sold each 15375 $1.88 42 155-0640 Black Handle, sold each 15376 $1.88 45 155-0670 Red Power Cable, 63" 15671 $18.69 46 155-0675 Black Ground Cable, 51" 15672 $17.77 47 155-0665 Cable and Plug Assembly 15670 $15.93 48 1306901 Hand Held Controller for Straight Blade Plow $199.50

36

37 3839 40

41 42

45 46

47

Fittings


24 155-0375 Quick Disconnect 875200100 $10.75 25 256-0365 1/4", 90o Male elbow 875210544 $2.86 26 256-0370 1/4", 90o Tall Rigid Male elbow 21857 $4.25 27 324-0153 1/4" NPT Male/45o Female swivel 875220344 $4.14 28 324-0155 1/4" NPT Male/90o Male swivel 875220244 $5.40 29 324-0122 Dust plug, 2 pc. set 81700026 $6.98 LOC. - Location on Drawing N.I. - Not illustrated

We don't recommend using Teflon® Tape on pipe thread joints. Tape will eventually break down and contaminate your system. Instead use a Liquid Teflon Pipe Joint Compound. We carry #31229 $2.89/1oz.

31229$3.42/1oz.

Electrical


30 324-9170 Hose, 1/4" NPT ends x 34" 816000095034 $14.40

30 324-9173 Hose, 1/4" NPT ends x 40" 816000095040 $18.99

30 324-9175 Hose, 1/4" NPT ends x 45" 816000095045 $19.89

30 324-9178 Hose, 1/4" NPT ends x 56" 816000095056 $17.33

30 324-9180 Hose, 1/4" NPT ends x 64" 816000095064 $19.46

31 155-9350 Hose, 1/4"NPT with (1) 90o swivel 21856 $10.90

29

Hydraulic Pump and Fluid

50

See Meyer Section for Pump Parts

Shown mounted

48

Many new style Diamond® Plows use Meyer® Pumpsfor replacement pump parts see pages 20-25.

See Meyer Section for Pump PartsSee Meyer Section for Pump Parts

SPECIAL SALESPECIAL SALEthru 12/31/20thru 12/31/20155-9450 1 QT $5.95155-9460 1 CASE $59.00

4WD Shift Linkagethat fits Ford Full Size trucks 92-9899-724 $185.71

Includes plastic sleeve and bolt for complete repair.


Stainless SteelStainless Steel

• Solid steel linkage opens and closes the gate in incremental steps• Large gate opening to allow product to flow smoothly• T-handle with comfort grips with gate control at your fingertips• Spiked auger eliminates binding and works in either direction• Enclosed metal transmission gears withstand the elements• New Zerk fitting for easy lubrication of transmission gears

Carbon SteelCarbon Steel

COMMERCIAL WALK BEHIND SALT SPREADERS

363-168080 lb. Capacity Professional Salt Spreader, Carbon Steel Frame & T-Handle.Reg. $233.00 SALE $205.04

363-170080 lb. Capacity Professional Salt Spreader, Stainless Steel Frame & T-Handle.Reg. $360.50 SALE $317.24

• Adjustable salt baffle system spreads salt where you want it• Spreads bagged salt, halite and ice-melt• 12” Pneumatic tires provide stability over uneven terrain• Powder coated steel or S.S. frame directly supports hopper• Easy to assemble

Low Profile LED Snow Plow Light with Heated Lens

SALE THRU

12/31/20

• LED technology increases road illumination• Heated, tempered glass lens• 5200-5700K color temperature• FMVSS108 compliant• Dual post mount• DRL compatible• 12/24VDC; 4 Amp• 19" leads with 6-pin Deutsch connector• Light Dim: 13.385"L x 2.950"H x 3.280"D

• 45W high beam• 25W low beam• 20W auto heating function• 3W, turn signal

NEWHeated LensHeated Lens

69-998 - LOW PROFILE LED SNOW PLOW HEADLIGHT SET Reg. $537.44 SALE $498.00

sale sales on · 2019. 9. 17. · driveway markers 153-0065 yellow high visibility commercial &...

Documents