Air Tech Private LimitedSAMARTH

AN ISO 9001-2008 COMPANY

URL : www.samarthair.com www.indiamart.com/samarthairtech

H-140-2R

H-241-2R

H-138 R

H-166

CD- 6 UNIT

Al Fixed and Oscillating type Outstanding features offer you better humidity control at low cost.

The AI Humidifier has both its ventilating fan and atomizing unit by 0.75 HP motor.

400/*440 Volts, 3 Phase/230V, Single Phase, 50 Cycle, A.C. Supply. The unit is capable of handling 2400 cu.

Ft. of air per minute and evaporating upto 40 liters of water per hour.

SPECIFICATION :

1. High Capacity Evaporation.

2. Positive direction air flow for effctive mist depersal.

3. Completely self cointained unit.

4. Correct humidity maintained with accurate, automatic controls.

5. Designed for minimum maintenance.

6. Automise water into a fine mist for rapid evaporation.

7. Distribute the humidified air uniformly throughout the room.

8. Low operating cost with efficient fractional HP motor.

INDUSTRIAL AIR CONDITIONINGPART NO.

Disc

Grid Ring (Right)

Grid Ring (Left)

Back Head (Left)

Back Head (Right)

Front head (Left)

Front Head (Right)

Sling of Washer

Inside Feed Pipe (Left)

Inside Feed Pipe (Right)

Outside Fees Pipe (Left)

Outside Feed Pipe (Right)

Double Orfice Housing

H. 166

H-138. R

H-138. L

H.140. 2L

H. 140 2R

H 241 2L

H.241 2R

H. 164

H.167. L

H.167. R

FIX TYPE TWIN “C” AUTOMIZER OSCILLATING TYPE

INDUSTRIAL AIR ENGINEERING COMPANY

MFG. & SUPPLIERS : TEXTILE, HUMIDIFICATION, VENTILATION, PRESSURISATION & FILTRATION SYSTEMS

23,24,25, Shiv Industrial Estate, Near Ravi Randal Society, Jasoda Nagar Cross Road, N.H.-8, Ahmedabad-380026. Gujarat. INDIA

Ph.: +91-79-25894992, Tele-Fax: +91-79-25894944 (M)+91-9825234539, Email: munil_samarthair@rediffmail.com

Part No.

Part No. Part No.C 14

C 15

C 50-A

C 50-L

C 66

C 66 N

C 67

C 69

C 72

C 72

C 72-N

C 104

Stand

Drip Pan

Safety Screw

Disc

Back Head

Front Head

Sling of Washer

Motor

Inner Feed Pipe-Back

Fan

Bracket

Outside Feed Pipe

Orifice Housing

CJ-229

CL-1

CL-1-A

CL-1-B

CL-1-C

CL-2

CL-2-A

CL-4

Drip Cup

Drip Cup Washer

Double Union Washer

Double Union Locknut

Trap Top Bolt

Trap Top Bolt Nut

Drip Cup Bolt

Spacing Ring Screw

Feed Pipe Bracket

Screw

Drip Pan Bolt

Drip Pan Bolt Nut

King Pin

CL-33

CL-35

CL-47

CL-136

CL-140

CL-141

CL-142

CL-143

CL-144

CL-334

CJ-28

CJ-130

CJ-229

Part No. Part No. Part No.Name Name Name

A Strainer Piping

B Strainer Plug Gasket

C Strainer Screen

D Orifice Screw

E Orifice Plug

F Orifice Plug Gasket

Grid Ring

Grid Ring Lip

Grid Ring Tongue

Grid Ring Drain

Case

Case Lip

Fan Guard

PARTS LIST OF TYPE ‘AL’ HUMIDIFIER

LIST OF SPARE PARTS FOR SAMARTH FOR CLIMADUCT

SAMARTH CLIMADUCT UNIT

The climaduct is a unique self contained unit for complete industrial air conditioning, it comprise an Axial flow ventilation fan one or more samarth Centrifugal Evaporators a distribution duct with eliminators, diffusers and air mixing chamber with suitable damper for fresh air intake end . for departmentrecirculation air, a set of air filters and if required, steam heating coils. Theevaporator produces finely atomized spray of water a part of which is evaporated

in the duct and a part of the finer particles get distribution in the department as entailed moisturethrough the specially designed eliminators and diffusersand the bigger part return for recirculation. The units sizes are 15000 CFM.., 20000 CFM., 25000 CFM ,30000 CFM. and 35000 CFM. etc. The air mixing chamber is specially designed for being located eitheron the wall or suspended through the ceiling with suitable damper arrangements. The fresh air could be taken either through the wall.

CL-2

CL-143

CL-334

CL-47

CL-4

CL-104

CL-33CJ-28

C-66C-66NC-72C-118

C-14

CL-35 C-72N

CL-2ACL-2A

CL-1C

CL-1A

CL-1B

CL-1

CL-144

C-72

CL-141

CL-140

CL-142

CL-138

CL-69

CJ-130

C-50L

CJ-229

C-67C-15