sample course descriptions - the cad academy · 2009. 8. 11. · ondemand elearning: handson hours:...

30
Global OnDemand ELearning Library Sample Course Descriptions http://becareers.org July 2008

Upload: others

Post on 09-Feb-2021

0 views

Category:

Documents


0 download

TRANSCRIPT

  • Global OnDemand ELearning Library Sample Course Descriptions 

    http://becareers.org 

    July 2008

    http://becareers.org/

  • Welcome This catalog has been specially prepared to provide you with a glimpse into the wealth of online courses made available to all BE Careers Network Academic subscribers.  All told, there are over 700 such courses on the Bentley LEARN Server, Bentley’s learning management system which covers a wide spectrum of products and design disciplines.  Although the vast majority of the courses listed here are introductory in nature, there are several examples of more advanced topics such as the MicroStation for Advanced Users V8 XM Edition. This collection or abbreviated Course Catalog is designed to whet your appetite to what is possible on the Bentley LEARN Server so take a few minutes to explore the environment. The Course Catalog contains selected courses that are most frequently accessed and we feel most appropriate to give students the necessary skills to succeed. 

    Accessing the contents of this catalog What you see here are the descriptions of the courses as presented in the Bentley LEARN Server.  You can find each of these courses on your own by using the Bentley LEARN Server’s Advanced Search we have made it easier to get to when viewing it in Adobe Acrobat Reader.  When you find a course you are interested in signing up for—provided you are a member of the Academic Subscription program, simply click on the name of the course in the catalog.  This provides a hyperlink to the course itself which you can then login to register. 

    Once you have signed up you can start taking the course by clicking the Course Offerings link on the left side of the page, click on the Currently Registered Training button and click Launch to “launch” the selected course.  You can stop and restart any of the online courses at your convenience.  The Bentley LEARN Server always remembers where you left off and provides to you the ability to pick up where you left off.  Keep in mind there is no time limit on this and that you control the order in which you take the various chapters found in most of the courses. 

    So, give this catalog a good read.  You will, no doubt, find something of interest.  In the case you can’t find what you are looking for, you can always browse the entire collection of catalogs presented on the Course Offerings page or use the Advanced Search to focus in on your specific interest. 

    And remember, if you have any questions; don’t hesitate to contact us at [email protected] 

    Regards. 

    The entire BE Careers Network team 

    About the BE Careers Network BE Careers Network brings softwaresupported infrastructure curricula into academic institutions through tailored programs and partnerships, to help produce careerready engineers and architects. We support educators and students through software, blended learning techniques, and more. Together with academic institutions and industry professionals, Bentley cultivates the skills necessary for career ready AEC professionalsfor Academic programs encompassing Architecture, Geospatial, Plant design, and Civil, Structural and Hydraulic Engineering. By supporting schools, BE Careers helps sustain the AEC industry with knowledgeable students and graduates.

    http://lms.bentley.com/globalelearning/DesktopDefault.aspxhttp://lms.bentley.com/globalelearning/DesktopDefault.aspx?tabindex=4&tabid=255http://lms.bentley.com/globalelearning/DesktopDefault.aspx?tabindex=1&tabid=226http://lms.bentley.com/globalelearning/DesktopDefault.aspx?tabindex=4&tabid=255mailto:[email protected]

  • BE Careers Network Global ELearning Library 

    For more information email [email protected], © 2008 Bentley Systems, Incorporated 

    MicroStation Essentials V8 XM Edition OnDemand eLearning: Handson  Hours: 32 

    At the end of the course students will be able to: • create and edit 2D designs using established design standards in a production environment • have a solid understanding of MicroStation

    • Course Overview • Welcome to MicroStation • Working with Views • Drafting with MicroStation • AccuDraw, AccuDraw, AccuDraw • Element Creation Tools • Additional Element Attributes • The Level System • Working with Existing Elements • Modifying Existing Elements • Annotating Designs • Organizing Design Data • Organizing Project Data • Creating Printed Output 

    Course Prerequisites:  None 

    Products Covered: MicroStation 

    This course is designed for the new MicroStation user and builds a solid foundation in the concepts, tools and features found in the MicroStation drawing environment. In this handson course, students are already using MicroStation by page four of the course guide. Starting with setting up a drawing and concluding with plotting, students walk through a typical workflow using the tools and features of the latest version of MicroStation. Interspersed throughout are realworld design problems solved using the concepts learned to that point in the course. Various engineering disciplines are represented in the form of handson exercises. This offering is taught using MicroStation V8 XM Edition. 

    This course uses the MicroStation Examples files as the course data set. These files are available: When you install MicroStation 

    Description

    Objectives

    Details

    Topics

    http://lms.bentley.com/globalelearning/DesktopModules/OfferingInfo.aspx?cid=3973&catid=83&offid=19970&tabindex=4&tabid=255

  • BE Careers Network Global ELearning Library 

    For more information email [email protected], © 2008 Bentley Systems, Incorporated 

    MicroStation V8 XM Edition for CAD Users OnDemand eLearning: Handson  Hours: 24 

    After this course students will be able to: • apply MicroStation to the design process for creation, editing, referencing and plotting • recognize issues surrounding translation files to and from MicroStation

    • Welcome to MicroStation • Working with Views • Designing with MicroStation • AccuDraw • Element Creation • Additional Attributes • Levels • Working with Existing Elements • Modifying Elements • Annotating Drawings • Organizing Design Data • Organizing Project Data • Printing Overview

    • The Print Dialog Box • Design Problem 

    Course Prerequisites: None 

    Products Covered: MicroStation 

    This course is designed for experienced CAD users who want to transition existing CAD knowledge to MicroStation skills. To ease the transition to MicroStation, parallel references are continually given, showing how MicroStation handles operations familiar to the CAD user. Subjects covered range from the initial setup of a new design file, to incorporating existing data from nonMicroStation CAD products. Plotting and other output considerations are covered, including PDF creation. 

    This course uses the MicroStation Examples files as the course data set. These files are available: When you install MicroStation 

    Description

    Objectives

    Details

    Topics

    http://lms.bentley.com/globalelearning/DesktopModules/OfferingInfo.aspx?cid=4508&catid=83&offid=20719&tabindex=4&tabid=255

  • BE Careers Network Global ELearning Library 

    For more information email [email protected], © 2008 Bentley Systems, Incorporated 

    MicroStation V8 XM Edition AccuDraw Basics OnDemand eLearning: Handson  Hours: 8 

    After this course students will be able to:

    • apply the tools and techniques of AccuDraw to increase quality and speed of drafting and modeling

    • AccuDraw Basics • AccuDraw Shortcuts • Applying AccuDraw • AccuDraw in 3D 

    Course Prerequisites:  None 

    Products Covered:  MicroStation 

    Students will learn that AccuDraw is indispensable to MicroStation. Students will discover how to use this essential and powerful tool to increase drawing and modeling accuracy as well as speed.  The course covers 2D and 3D. 

    Description

    Objectives

    Details

    Topics

    http://lms.bentley.com/globalelearning/DesktopModules/OfferingInfo.aspx?cid=3974&catid=83&offid=19974&tabindex=4&tabid=255

  • BE Careers Network Global ELearning Library 

    For more information email [email protected], © 2008 Bentley Systems, Incorporated 

    MicroStation V8 XM Edition Everything 3D Part 1 OnDemand eLearning: Lecture  Hours: 4 

    In this class we will learn: • manage and control 3D views • use AccuDraw in 3D • apply curve tools to design problems • use Solid Modeling tools and techniques

    • 3D Basics • 3D View Control • AccuDraw • Basic 3D tools • Solid Modeling • Conceptual Modeling 

    Course Prerequisites:  MicroStation Essentials 

    Products Covered:  MicroStation 

    Through a series of handson exercises, users will develop a solid understanding of the 3D capabilities of MicroStation. Users will navigate and work in a 3D design file, create and edit 3D geometry in MicroStation, create parametric 3D models and develop a basic knowledge of the rendering capabilities of MicroStation. 

    Description

    Objectives

    Details

    Topics

    http://lms.bentley.com/globalelearning/DesktopModules/OfferingInfo.aspx?cid=6190&catid=83&offid=23369&tabindex=4&tabid=255

  • BE Careers Network Global ELearning Library 

    For more information email [email protected], © 2008 Bentley Systems, Incorporated 

    MicroStation V8 XM Edition Everything 3D Part 2 OnDemand eLearning: Lecture  Hours: 4 

    In this class we will learn: • apply curve tools to design problems • use Surface Modeling tools and techniques • create 2D sheets and export 3D data

    • Meshes • Surface Creation and Modification • Cells and Utilities 

    Course Prerequisites:  MicroStation Essentials 

    Products Covered:  MicroStation 

    Through a series of handson exercises, users will develop a solid understanding of the 3D capabilities of MicroStation. Users will navigate and work in a 3D design file, create and edit 3D geometry in MicroStation, create parametric 3D models and develop a basic knowledge of the rendering capabilities of MicroStation. 

    Description

    Objectives

    Details

    Topics

    http://lms.bentley.com/globalelearning/DesktopModules/OfferingInfo.aspx?cid=6191&catid=83&offid=23373&tabindex=4&tabid=255

  • BE Careers Network Global ELearning Library 

    For more information email [email protected], © 2008 Bentley Systems, Incorporated 

    MicroStation V8 XM Edition Everything 3D Part 3 OnDemand eLearning: Lecture  Hours: 4 

    In this class we will learn: • use AccuDraw in 3D • use Feature Modeling tools and techniques • use dimension driven designs • create 2D sheets and export 3D data

    • Feature Modeling • Advanced Feature Modeling • Drawing Composition 

    Course Prerequisites:  MicroStation Essentials 

    Products Covered:  MicroStation 

    Through a series of handson exercises, users will develop a solid understanding of the 3D capabilities of MicroStation. Users will navigate and work in a 3D design file, create and edit 3D geometry in MicroStation, create parametric 3D models and develop a basic knowledge of the rendering capabilities of MicroStation. 

    Description

    Objectives

    Details

    Topics

    http://lms.bentley.com/globalelearning/DesktopModules/OfferingInfo.aspx?cid=6192&catid=83&offid=23374&tabindex=4&tabid=255

  • BE Careers Network Global ELearning Library 

    For more information email [email protected], © 2008 Bentley Systems, Incorporated 

    MicroStation for Advanced Users V8 XM Edition OnDemand eLearning: Handson  Hours: 24 

    After this course advanced users will be able to: • improve drafting and designing productivity using MicroStation • apply  advanced productivity tools, features and techniques

    • AccuDraw • Position and Rotation • AccuDraw Settings • The Popup Calculator • 3D AccuDraw Basics • Element Types in more detail • Point elements • Curves • Cells • Annotation • Detailing Symbols • Annotation Scale • XYZ Text Tools • Word Processor Text Editor • Dimension Styles • Tags • Tag Tools • Creating Tag Sets • Attaching Tags • Reviewing Tag Data • View Attributes • Selecting Tags by Attributes • Tag Reports • Tag Set Libraries • Custom Line Styles • Custom Line Style Components • Using Custom Line Styles • Creating Custom Line Styles • Manage Line Style Definitions • Modifying Line Style Attributes • Productivity Drafting Tools • Select By Attributes • PowerSelector • IntelliTrim • Move to Contact • Advanced use of Manipulate and Modification tools • Links • Generate Web Pages w/ HTML Author • Engineering Links • HTML Statements to Control USTN • Project Explorer • Google Earth

    • Basics • Links and control • Animation • 3D Warehouse • Save to SKP • Using Collada files • Data Management • Data Cleanup Dialog Box • Standards Checker • Design History • Multi Scale Details • Methods • Method 1 • Method 2 • Customization Tools • DGNLIB setup • Simple Customizations • Element Templates • Tasks • Import USTN.M01 files • Workspaces • Groups • Graphic Groups • Named Groups • Printing • The Print Dialog Box • Setting print preferences • Configuration Variables • Drivers • Options for output • Pen Tables • Batch Print • Steps For Using Batch Print • Configuring Batch Print’s Specifications • Processing a Job • Troubleshooting • File Protection • What is File Protection? • Rights as Defined in MicroStation • Opening Password Protected DGN Files • Raster File 

    Course Prerequisites:  MicroStation V8 XM Essentials 

    Products Covered:  MicroStation V8 XM This course is intended for the experienced MicroStation user and focuses on the features of MicroStation designed to improve user and workgroup productivity. Providing lecture, demonstration and handson exercises, MicroStation V8 XM for Advanced Users begins with a thorough examination of AccuDraw and ends with an introduction to importing and exporting CAD data from/to other CAD programs. 

    Description

    Objectives

    Details

    Topics

    http://lms.bentley.com/globalelearning/DesktopModules/OfferingInfo.aspx?cid=4619&catid=83&offid=20701&tabindex=4&tabid=255

  • BE Careers Network Global ELearning Library 

    For more information email [email protected], © 2008 Bentley Systems, Incorporated 

    MicroStation V8 XM Edition for CAD Managers OnDemand eLearning: Handson  Hours: 32 

    After this course users attending will be able to:

    • create an efficient and intuitive operating environment for all members of the design team or larger organization

    • provide integrated company standards deployable across the entire corporate organization • maintain strict segregation between the custom environment developed on site and the core 

    Bentley delivered software resources 

    PART 1: • Installations and Design File Components • Installation of MicroStation and 

    SELECTserver • The Design Library File • Working with Levels • Text and Dimension Styles • Working with Cells • Creating the Corporate Standards DGNLIB 

    File • Developing Project Standards through Seed 

    Files • Customizing the MicroStation Line Styles • Using Element Templates for Standards 

    Management PART 2:

    • Workspaces and Plotting • Exploring the MicroStation Workspaces • Best Practices • Defining an organizationwide Workspace • Customizing the Graphic User Interface • Structured Workflows

    • Managing MicroStation Plotting • BatchPlot 

    PART 3: • Applications and Useful Utilities • VBA and MDL • Integrating Applications into the 

    Workspace • The Art of Remapping and Batch 

    Processing • Archival Operations using Packager 

    PART 4: • Powerful Project Environment 

    Enhancements • Design History • File Protection • Digital Signatures and Digital Rights • Internet Related Operations • Trouble Shooting the Work Environment • Trouble Shooting MicroStation Design File 

    Course Prerequisite: MicroStation V8 XM Administrator Update Users attending must be experienced MicroStation Users 

    Products Covered: MicroStation V8 XM Edition 

    MicroStation V8 XM for CAD Managers is a comprehensive course for managers of multiuser MicroStationbased (or hybrid) CAD installations. This course examines in detail the tools and procedures that allow complete control over the installation, appearance and operation of MicroStation. Running throughout the course is the development of a best practice CAD work environment constructed stepbystep as each topic is discussed. In addition, users attending will receive advice on how to manage their environment, as well as their users and customers, in order to maximize productivity, achieve targets and develop team member abilities. 

    Description

    Objectives

    Details

    Topics

    http://lms.bentley.com/globalelearning/DesktopModules/OfferingInfo.aspx?cid=4865&catid=83&offid=22063&tabindex=4&tabid=255

  • BE Careers Network Global ELearning Library 

    For more information email [email protected], © 2008 Bentley Systems, Incorporated 

    GenerativeComponents V8 XM Edition Essentials OnDemand eLearning: Handson  Hours: 24 

    Upon completion of the course users will be able to: • install and set up GenerativeComponents • use GenerativeComponents tools to create geometry • apply principles of Transactional and Programmatic design • import and Export with Excel and databases • use principles of scripting to design • integrate GenerativeComponents design with their CAD workflow

    • Installation and Setup • General Principles • GenerativeComponents Basics • Defining Variables, Sets and Coordinate 

    Systems • Operations, Collections and Replication • Parallel Representations • Additional Feature Types • Script based design • Export and Import • Using GenerativeComponents in a workflow • Design Problems 

    Course Prerequisites:  Users taking this course will need fluency in 3D modeling including the use of Bspline Curve and Surface geometry, as well as experience in developing ‘application logic’, for example, in the use of spreadsheets. 

    Products Covered:  GenerativeComponents 

    In this course users will learn that GenerativeComponents is an advanced parametric and associative design system which gives designers and engineers new ways to efficiently explore alternative forms. Once the underlying logic and design relationships have been defined, the designer can create new options without manually drawing (or redrawing) the detail design model for each possible scenario. This course will show how GenerativeComponents allows designers to work completely graphically, or to combine this with scripting and programming where appropriate.  The integration of algorithmic design with conventional interaction, based on direct manipulation, allows GenerativeComponents to fully support alternative approaches to design that span the intellectual and creative spectrum. The Essentials course will take students through the principles of design with GenerativeComponents. Students will become familiar with installation, general interface principles, basic geometric generation, basic scripting and importing/exporting data. 

    Description

    Objectives

    Details

    Topics

    http://lms.bentley.com/globalelearning/DesktopModules/OfferingInfo.aspx?cid=5099&catid=83&offid=21354&tabindex=4&tabid=255

  • BE Careers Network Global ELearning Library 

    For more information email [email protected], © 2008 Bentley Systems, Incorporated 

    10 

    Bentley Architecture Fundamentals XM Edition OnDemand eLearning: Handson  Hours: 16 

    After completion of this course students will be able to: • create a 3D model from sketches, scans and other design criteria • construct the model and extract from it • prepare space schedules, reporting on room sizes, finishes, occupancy • draw plans with sections and elevations • prepare schedules of all parts within the model, such as doors, windows, bills of quantities • assess the model in its real environment and present camera views of that model

    • Core Concepts • Space Planning • Design Development • Reports and Schedules • Printing 

    Course Prerequisites:  Knowledge of Microsoft Windows. Knowledge and understanding of the principles of three dimensional design. Modelling using MicroStation XM Edition. It is recommended that attendance or review of the 2D to 3D. Must have completed Mic 

    Products Covered: Bentley Architecture V8 XM Edition 

    Using Bentley Architecture V8 XM Edition and its example files throughout the course, students will be able to do realtime, intelligent 3D model creation; review and edit the model; annotate as well as extract drawings, reports and schedules from the model. 

    Description

    Objectives

    Details

    Topics

    http://lms.bentley.com/globalelearning/DesktopModules/OfferingInfo.aspx?cid=5256&catid=81&offid=22009&tabindex=4&tabid=255

  • BE Careers Network Global ELearning Library 

    For more information email [email protected], © 2008 Bentley Systems, Incorporated 

    11 

    Bentley Architecture Fundamentals XM Edition Metric OnDemand eLearning: Handson  Hours: 16 

    After this course students will be able to: • create a 3D model from sketches, scans and other design criteria • construct the model and extract from it • create space schedules reporting on room sizes, finishes occupancy, plans, sections, 

    elevations, schedules of all parts within the model (such as doors, windows, bills of quantities) • assess the model in it's real environment and present camera views of that model

    • Core Concepts • Space Planning • Design Development • Reports and Schedules • Printing 

    Course Prerequisites:  Knowledge of Microsoft Windows Knowledge and understanding of the principles of three dimensional design Modelling using MicroStation XM Edition It is recommended that attendance or review of the 2D to 3D MicroStation course is done 

    Products Covered:  Bentley Architecture 

    Using Bentley Architecture XM Edition and its example files throughout the course, you will be able to do realtime, intelligent 3D model creation, review and edit the model, annotate, extract drawings, reports and schedules from the model. 

    Description

    Objectives

    Details

    Topics

    http://lms.bentley.com/globalelearning/DesktopModules/OfferingInfo.aspx?cid=3723&catid=81&offid=19186&tabindex=4&tabid=255

  • BE Careers Network Global ELearning Library 

    For more information email [email protected], © 2008 Bentley Systems, Incorporated 

    12 

    Introduction to Bentley Building Mechanical Systems OnDemand eLearning: Handson  Hours: 16 

    After this course users will be able to: • place ductwork and diffusers • place fittings and grilles • manipulate and modify mechanical elements • use tools to manage and verify the parts and families that are used to create the model • extract drawings, reports and schedules form the model • customize the dataset to comply to company standards or projectspecific standards

    • Placing ductwork and diffusers • Placing fittings and grilles • Manipulating and modifying mechanical 

    elements • Using tools to manage and verify the parts 

    and families that are used to create the model

    • Extracting drawings, reports and schedules from the model

    • Customizing the dataset to comply to company standards or projectspecific standards 

    Course Prerequisites: A fundamental knowledge of MicroStation is needed. An understanding of mechanical design is required 

    Products Covered: Bentley Building Mechanical Systems 

    Introduction to Bentley Building Mechanical Systems provides an excellent start to becoming highly productive in this industryleading solution for Mechanical and Plumbing disciplines. In this 8 hour course, any professional will go through the critical elements to become more productive and extend their capabilities. 

    Description

    Objectives

    Details

    Topics

    http://lms.bentley.com/globalelearning/DesktopModules/OfferingInfo.aspx?cid=4413&catid=81&offid=20506&tabindex=4&tabid=255

  • BE Careers Network Global ELearning Library 

    For more information email [email protected], © 2008 Bentley Systems, Incorporated 

    13 

    Integrated Structural Design from Bentley/RAM/ STAAD OnDemand eLearning: Handson  Hours: 4 

    After this course students will be able to: • open and modify an RSS model • import a floor in the model to RAM Concept • import the whole model into RAM Advanse and Connection • import the model into Bentley Structural

    • Opening and modifying an RSS model • Importing a floor in the model to RAM 

    Concept • Importing the whole model into RAM 

    Advanse and Connection • Importing the model into Bentley Structural 

    Course Prerequisites: An understanding of stuctural design is an advantage An understanding of CAD modelling is needed 

    Products Covered: Bentley Structural STAAD RAM Structural Systems RAM Concept RAM Advanse RAM Connection 

    This class demonstrates seamlessly sharing information between the structural engineering design applications RAM Structural System, RAM Concept, RAM Advanse and RAM Connection, which is a twoway data link between RAM Structural System and Bentley Structural. 

    Description

    Objectives

    Details

    Topics

    http://lms.bentley.com/globalelearning/DesktopModules/OfferingInfo.aspx?cid=4466&catid=81&offid=20552&tabindex=4&tabid=255

  • BE Careers Network Global ELearning Library 

    For more information email [email protected], © 2008 Bentley Systems, Incorporated 

    14 

    Modeling Offshore Structures and Bridges using STAAD OnDemand eLearning: Handson  Hours: 4 

    Expertise in the application of STAAD to foundation design. Improved analysis of your STAAD work through better understanding of errors and warnings.

    • Creating the wave model • Defining wave parameters • View loadings in STAAD.Pro and analysis • Creating the transportation model • Defining the transportation parameters • Creating a bridge deck and influence surface • Creating a roadway and lane requirements 

    Course Prerequisites:  An understanding of structural design concepts. 

    Products Covered:  STAAD.Pro 2006 

    Learn how to properly use the STAAD.offshore module to simulate wave loadings on jacket structures. Also, the second half of the classroom will focus on modeling bridge decks and applying a moving load on the system. 

    Description

    Objectives

    Details

    Topics

    http://lms.bentley.com/globalelearning/DesktopModules/OfferingInfo.aspx?cid=4513&catid=81&offid=20596&tabindex=4&tabid=255

  • BE Careers Network Global ELearning Library 

    For more information email [email protected], © 2008 Bentley Systems, Incorporated 

    15 

    Introduction to Bentley Structural OnDemand eLearning: Handson  Hours: 16 

    After this course users will be able to: create, extract, analyze and use the data understand BIM concepts and application in the structural engineering industry

    • Creating Data • Extracting Data • Analyzing Data • Using Data 

    Course Prerequisites: Fundamental knowledge of MicroStation An understanding of structural design 

    Products Covered:  Bentley Structural 2004 Edition 

    Through a series of exercises and lectures, students will learn the methods available in Bentley Structural to create models, extract drawings and bills of quantities. Students will learn how to export the data to other applications such as Midas, STAAD or RAM for analysis and reimport into Bentley Structural. 

    Description

    Objectives

    Details

    Topics

    http://lms.bentley.com/globalelearning/DesktopModules/OfferingInfo.aspx?cid=4385&catid=81&offid=20469&tabindex=4&tabid=255

  • BE Careers Network Global ELearning Library 

    For more information email [email protected], © 2008 Bentley Systems, Incorporated 

    16 

    InRoads Fundamentals XM Edition 8.9 with MicroStation OnDemand eLearning: Handson  Hours: 24 

    After this course students will be able to: • navigate and use the InRoads Interface • create a CAD files to be used for InRoads graphics using Project Defaults • display surface contours, features and triangles • create horizontal geometry alignments from graphics • create and edit horizontal alignments through curve definitions • create profiles and cross sections • create and edit vertical PI’s and define alignments • create a corridor with the Roadway Designer • create a surface from a corridor • create and update cross sections • annotate cross sections • generate endarea volumes and volumes reports • generate an XML report and fixed format reports

    • InRoads interface • Setting up an InRoads project • Project Defaults • Surface Types • Surface features • Creating existing ground surfaces • Displaying surfaces • Surface properties • Improving surface quality • Creating, editing, and displaying Horizontal 

    alignments • Creating, editing, and displaying Vertical 

    alignments • Displaying profiles and cross sections • Annotating cross sections • Templates and Components • Introduction to Roadway Designer

    • Earthwork Volumes • Reports • Productivity Tools 

    Course Prerequisites: Students attending should have experience designing roadways and producing design plans, a working knowledge of the Windows operating system, as well as experience with MicroStation V8 XM Edition or MicroStation V8 2004 Edition, as 

    Products Covered: InRoads XM Edition with either MicroStation V8 XM Edition or MicroStation V8 2004 Edition 

    This course introduces civil engineering designers to using InRoads software for road design projects. This handson training walks students through the project design cycle; including setting up a project, existing ground data, geometry, volume design, and reporting. Students are encouraged to attend the InRoads Roadway Designer course after completing this training.  InRoads Roadway Designer continues from this course and explores the Roadway Designer is much more detail. 

    Description

    Objectives

    Details

    Topics

    http://lms.bentley.com/globalelearning/DesktopModules/OfferingInfo.aspx?cid=4512&catid=82&offid=20599&tabindex=4&tabid=255

  • BE Careers Network Global ELearning Library 

    For more information email [email protected], © 2008 Bentley Systems, Incorporated 

    17 

    Introduction to the InRoads Roadway Designer OnDemand eLearning: Handson  Hours: 2 

    After this course users will be able to: • create a new template from existing end conditions • build a new template using the Create Template command • apply templates to create a roadway corridor • define transitions between templates • analyze template assignments by using navigation tools in the Roadway Designer • generate a sub surface from the roadway design

    • Changes since InRoads V8 2004 Edition • Navigating through The Create Template 

    Command • Building templates • Building a corridor • Template transitions • Examining the corridor • Superelevation • Generating a subsurface model 

    Course Prerequisites: Experience with InRoads 2004 Edition Define Roadway and Roadway Modeler is recommended. 

    Products Covered:  InRoads XM Edition, InRoads V8.8 and V8.7 

    During this twohour workshop users will learn the general processes of the InRoads 8.7 Roadway Designer, including template lists, transitioning between templates, and side slope exceptions. This is an  intermediatelevel workshop. 

    Description

    Objectives

    Details

    Topics

    http://lms.bentley.com/globalelearning/DesktopModules/OfferingInfo.aspx?cid=4441&catid=82&offid=20520&tabindex=4&tabid=255

  • BE Careers Network Global ELearning Library 

    For more information email [email protected], © 2008 Bentley Systems, Incorporated 

    18 

    GEOPAK Road I V8.8 OnDemand eLearning: Handson  Hours: 32 

    By the end of this class, the student will be able to: • Define design preferences and create a GEOPAK project • Extract and triangulate Digital Terrain Model (DTM) information from graphical elements • Analyze a DTM • Define a geometry chain using Coordinate Geometry (COGO) and horizontal alignment tools • Store a parcel and alignment using Graphical COGO • Create an existing ground profile and design the vertical alignment • Draw existing ground cross sections • Compute superelevation and draw shapes • Draw proposed cross sections • Calculate earthwork volume quantities • Create sheet layouts for cross sections, and for plan/profile drawings • Plans production annotation and the display of pavement striping • Calculate seeding reports, and the limits of construction • Generate a drive through of a design

    • Introduction to GEOPAK • The Project Manager • Digital terrain modeling • Coordinate geometry (COGO) • Horizontal alignment tools • Graphical COGO • The Design and Computation (D&C) 

    Manager • Existing ground profiles • Vertical alignment generator • Existing ground cross sections • Superelevation calculation • Proposed cross sections • The port viewer • Earthwork calculations • Cross section drawing sheets

    • Cross section reports and limits of construction

    • Labeling • Plan and profile sheets • D&C Manager – quantities • 3D modeling 

    Course Prerequisites: A minimum of two months of MicroStation experience is required. An understanding of road design is an advantage. 

    Products Covered: GEOPAK Road V8.8 

    In this course students will learn to use GEOPAK for road design projects. This handson training walks students through the project design cycle including: setting up a project, existing ground data, geometry, superelevation, volume calculations and drawing (plans) production. This handson course uses the GEOPAK Project Manager to guide students through a typical roadway design workflow, and enables students to completely design a roadway project. 

    Description

    Objectives

    Details

    Topics

    http://lms.bentley.com/globalelearning/DesktopModules/OfferingInfo.aspx?cid=4532&catid=82&offid=20616&tabindex=4&tabid=255

  • BE Careers Network Global ELearning Library 

    For more information email [email protected], © 2008 Bentley Systems, Incorporated 

    19 

    MX Road Design with Wizards, 2004 Edition OnDemand eLearning: Lecture  Hours: 1 

    After this class students will be able to: • design an alignment • design a road and superelevate it appropriately, and create pavement layers • perform brief visibility analysis of the road

    • Quick Alignment design • Alignment design • Carriageway design using templates • Road superelevation • Earthworks (side slope) design • Pavement layer design • Visibility analysis 

    Course Prerequisites: Basic understanding of the concepts of MX would be an advantage, but not necessary. 

    Products Covered: MX 2004 Edition 

    This course will guide students through simple road design using the easy to follow graphical user interface (GUI). An introduction to using these tools will show a templatelike approach to the design of road edges, widening, superelevation, and pavement design. The course will take students through a simple example to demonstrate the topics. 

    Description

    Objectives

    Details

    Topics

    http://lms.bentley.com/globalelearning/DesktopModules/OfferingInfo.aspx?cid=4750&catid=82&offid=21465&tabindex=4&tabid=255

  • BE Careers Network Global ELearning Library 

    For more information email [email protected], © 2008 Bentley Systems, Incorporated 

    20 

    Bentley Map Fundamentals, XM Edition OnDemand eLearning: Handson  Hours: 16 

    In this class we will learn: • Describe the support files required by the SHP file format. • Create a new map model. Attach references, rasters and features. • Manipulate the display, order and symbology of features. • Navigate and utilize the Command Manager. • Place and modify a print border. • Perform topology cleanup and creation tasks • Complete operations involving the coordinate system, drawing geodesic lines, and 

    interpreting the design plane. • Define and edit topology layers, overlaying topology layers and outputting the results of 

    spatial analysis.

    • Interoperability • The Map Manager • Placing and Editing features • Print Preparation • Cleaning and Creating Topology • Working with Coordinate Systems • Analysis and Thematic Mapping • Introduction to Oracle Spatial 

    Course Prerequisites: Working knowledge of MicroStation functionality including element creation, modification and manipulation tools. General knowledge of GIS terminology as it applies to mapping and infrastructure. 

    Products Covered: Bentley Map 

    This course teaches learners how to import SHP file. Then, create new map models and attach references, rasters and features in Map Manager. You will learn how to manipulate the display, order and symbology of features. As well as perform topology cleanup and use the topology creation tools to define and edit topology layers, overlaying topology layers and outputting the results of spatial analysis. 

    Description

    Objectives

    Details

    Topics

    http://lms.bentley.com/globalelearning/DesktopModules/OfferingInfo.aspx?cid=6308&catid=84&offid=23716&tabindex=4&tabid=255

  • BE Careers Network Global ELearning Library 

    For more information email [email protected], © 2008 Bentley Systems, Incorporated 

    21 

    Essential Mapping OnDemand eLearning: Handson  Hours: 16 

    After this twoday course students will be able to: • setup a standard GeoGraphics Project • utilize various data types in projects • prepare data for use within a project • present data using the topology tools

    • Mapping History • Setting up and creating a standard project • Introduction to Projection Systems • Working with various file types • Combining and cleaning up your data • Using topology to present your data 

    Course Prerequisites: Some basic MicroStation knowledge would be an advantage, for example, manipulation and modifying commands, and working with reference data. 

    Products Covered:  MicroStation GeoGraphics V8 2004 Edition 

    This twoday course introduces the three main processes involved in map production: Data Collection, Scrubbing and Presentation. After a brief introduction into the history of mapping, and a tour of some of the Bentley innovations, the course will delve into two days of handson map maintenance and creation. 

    Description

    Objectives

    Details

    Topics

    http://lms.bentley.com/globalelearning/DesktopModules/OfferingInfo.aspx?cid=3651&catid=84&offid=18860&tabindex=4&tabid=255

  • BE Careers Network Global ELearning Library 

    For more information email [email protected], © 2008 Bentley Systems, Incorporated 

    22 

    The Coordinate System Tools OnDemand eLearning: Lecture  Hours: 1 

    After this onehour lecture users will be able to: • work with multiple data sources, including warping and transforming between various 

    coordinate systems

    • Coordinate System tools overview • Master tool set • Reference tool set • Working with raster data • Coordinate transform tools • Coordinate utilities 

    Course Prerequisites:  Some Microstation experience would be useful, including working with reference and raster files. 

    Products Covered: Microstation Geographics V8 2004 Edition 

    This onehour lecture will provide an overview of how to define and manipulate Coordinate Systems in the GeoGraphics workflow. 

    Description

    Objectives

    Details

    Topics

    http://lms.bentley.com/globalelearning/DesktopModules/OfferingInfo.aspx?cid=4337&catid=84&offid=20412&tabindex=4&tabid=255

  • BE Careers Network Global ELearning Library 

    For more information email [email protected], © 2008 Bentley Systems, Incorporated 

    23 

    Creating Image Presentations in Bentley Descartes OnDemand eLearning: Handson  Hours: 2 

    After this twohour lecture users will be able to: • prepare images for presentation, by warping and georeferencing • edit the color table on images to enhance the display • drape images over an existing DTM model and render the display in a 3D environment

    • Course Overview • Georeferencing your images using the 

    register tools • The color table editor • Using the corridor tool • Draping the image 

    Course Prerequisites Some experience in working with raster data would be an advantage. 

    Products Covered:  Bentley Descartes V8 XM Edition 

    Bentley Descartes adds highperformance image operations to MicroStation, allowing warp, reference, resample, mosaic creation, reprojection and 3D terrain draping. This is a handson course that teaches image presentation techniques through realworld examples of image presentation including mosaics, montages, and draping with Bentley Descartes. 

    Description

    Objectives

    Details

    Topics

    http://lms.bentley.com/globalelearning/DesktopModules/OfferingInfo.aspx?cid=4321&catid=84&offid=20397&tabindex=4&tabid=255

  • BE Careers Network Global ELearning Library 

    For more information email [email protected], © 2008 Bentley Systems, Incorporated 

    24 

    WaterCAD/GEMS Modeling Basics V8 XM OnDemand eLearning: Handson  Hours: 4 

    Apply the basic principles of water distribution modeling and • gain essential knowledge for water system design.

    • Building functional models using existing data, network drawing, scenarios and alternatives management, and modeling tanks. 

    Course Prerequisites: Fundamental understanding of WaterCAD/GEMS software is not required but recommended, also WaterCAD/GEMS Introduction 

    Products Covered: WaterCAD/GEMS 

    This training module begins with the basics of hydraulics theory, water distribution system modeling theory, approach, review of the various applications for modeling, and how to effectively evaluate modeling results. Haestad Methods Solution 

    Description

    Objectives

    Details

    Topics

    http://lms.bentley.com/globalelearning/DesktopModules/OfferingInfo.aspx?cid=6127&catid=205&offid=23273&tabindex=4&tabid=255

  • BE Careers Network Global ELearning Library 

    For more information email [email protected], © 2008 Bentley Systems, Incorporated 

    25 

    PlantSpace P&ID User OnDemand eLearning: Handson  Hours: 8 

    By the end of this class students will be able to: • create drawings in P&ID • move, copy, modify and tag components using PlantSpace tools • verify and conform attributes and text parameters of components to company standards • generate an intelligent P&ID • identify inconsistencies, problems and query data in an Intelligent P&ID • generate report data • update tags and properties throughout the P&ID

    • Creating intelligent P&ID • Reviewing and correcting problems in P&ID • Querying data intelligence from the P&ID for 

    reporting 

    Course Prerequisites: Knowledge of Windows basics, including working with files in Windows Explorer Experience using MicroStation Working knowledge of 2D drawing 

    Products Covered: PlantSpace P&ID This one day course is intended for new and existing users. Students will learn how to create intelligent P&ID on the MicroStation platform. 

    Description

    Objectives

    Details

    Topics

    http://lms.bentley.com/globalelearning/DesktopModules/OfferingInfo.aspx?cid=4375&catid=80&offid=20457&tabindex=4&tabid=255

  • BE Careers Network Global ELearning Library 

    For more information email [email protected], © 2008 Bentley Systems, Incorporated 

    26 

    Bentley PlantSpace Design Series User OnDemand eLearning: Handson  Hours: 40 

    By the end of this class, students will be able to: • use basic AccuDraw • work with equipment and pipe components • route pipe using Intelligent Line Strings • use Design Series utilities to place and manipulate components • query, inspect and verify validity of components • generate reports on component data • generate isometric drawings • generate pipe stress information to run in third party applications • generate a section view

    • Working with AccuDraw • Working with Equipment Modeler • Building a custom Equipment component • Working with Piping components and 

    Intelligent Pipe Lines • Working with Design Series Utilities • Generating Project Deliverables • Working with PlantSpace AutoISOGEN 

    module • Working with PlantSpace Stress Interface 

    module 

    Course Prerequisites: Students must have knowledge of Windows basics, including working with files in Windows Explorer and experience using MicroStation V8. 

    Products Covered: PlantSpace Piping, PlantSpace Equipment Intended for new and existing users, this course covers the 3D applications including Piping and Equipment.   This course is more indepth for learning key functionality.  Students learn to design and engineer a 3D model.  Once students have completed this course they will generate deliverables and create input files for stress analysis programs. 

    Description

    Objectives

    Details

    Topics

    http://lms.bentley.com/globalelearning/DesktopModules/OfferingInfo.aspx?cid=5191&catid=80&offid=21684&tabindex=4&tabid=255