samsung artik cloud and genuino mkr100
TRANSCRIPT
Building a Sensing System using a Genuino MKR1000 and ARTIK Cloud
Massimo Banzi
ARTIK Cloud for IoT ChallengeHere’s how to get started to join the Challenge!https://www.hackster.io/contests/artikcloud
The code used here is based on information I gathered from these tutorials:
https://www.hackster.io/makers-ns/arduino-mkr1000-dht-artik-cloud-78cf18
https://www.artik.io/blog/2016/05/monitor-fire-temperature-using-artik-cloud-open-source-iot-hardware-android/
Register on ARTIK Cloud
https://developer.artik.cloud/account/signup
https://id.arduino.cc/auth/signup
Materials
Genuino MKR1000
TMP36 Temperature sensor
The TMP35/TMP36/TMP37 are low voltage, precision centigrade temperature sensors. They provide a voltage output that is linearly proportional to the Celsius (centigrade) temperature. The TMP35/TMP36/TMP37 do not require any external calibration to provide typical accuracies of ±1°C at +25°C and ±2°C over the −40°C to +125°C temperature range.
TMP36 Temperature sensor
http://bit.ly/simpletmp36
Simple code example for the TMP36
https://developer.artik.cloud/dashboard/devicetypes
Create a device type in ARTIK Cloud
https://developer.artik.cloud/dashboard/devicetypes
Create a manifest for the device
Create a manifest for the device
Activate manifest
Connect a device using the manifest cc.arduino.tempandfire
Connect a device using the manifest cc.arduino.tempandfire
Device info, you’ll need the Device ID and Device Token
http://bit.ly/artik01
ARTIK Cloud Example 01
{"sdid":"79643157064d46e2a7e47e4347f3a625","Type":"message","Data": {
"Temperature":24.00,"onFire":false}
}
Example Message
{"Data":
{"mid":"7c2c62011b254aa09aff0f80eb3418
c0"}
}
Example Reply
Thanks for joining!