PATIL SANDIP SHIVAJIMobile: +91 9766242660, +919096765256

E-Mail: sandip8kbp@gmail.com; sandip2890@yahoo.comSeeking a challenging and rewarding opportunity with an organization of repute which recognizes my true potential while nurturing my analytical and technical skills in the field of CAE / FEA / Design Engineering.

Profile Summary:

Design Engineer and FEA Analyst with 1+ year of experience in structural, modal, Harmonic, Fatigue & Linear, Non-Linear FEA analysis and design of pressure vessels in Omiti Engineering Pvt. Ltd., Pune.

Very good knowledge and exposure in linear, Non-linear, static, Structural, modal, Harmonic and Fatigue analysis.

Well versed with FEA software’s like ANSYS 13.0 (APDL, Workbench), Abaqus, Hypermesh, LMS virtual Lab, also with CAD software’s like Pro-E, CATIA, Solid works, Auto-Cad, etc.

Publish research paper in ““American International Journal of Research in Science, Technology, Engineering & Mathematics”.

Conducted a thesis on "FEM Analysis and Optimization of Two-Chamber Reactive Muffler by using Taguchi Method."

Very good exposure to ASME sec. VIII, Div-1 & 2, and other relevant code standards.

Professional Experience:

Currently designated as Design Engineer and FEA Analyst in Omiti Engineering Pvt. Ltd., Pune.Working since: 1 year 3 months.Job Profile: Primary working on FEA analysis of various components of Compressor, Pressure vessels and other industrial components by using Ansys 13.0. Handling and managing task relating to modeling, pre/post processing and report generation. Also working as support team member for design of pressure vessels as per ASME Div.-VIII in PV-Elite, and making manufacturing drawings in Auto-CAD as per code requirements and design parameters.

Project Undergone: Linear static analysis of pressure vessel cover flange. Structural static analysis of Air inlet nozzle on a flare tip. Structural, modal, Harmonic and Fatigue analysis of interstage separator bottles of

compressor system. Linear static and weld fatigue analysis of Pressure vessels of FPSO system for EGINA

Project, Nigeria. Structural stress analysis of Body Flanges of High pressure filters for OSC, Dubai. Static structural stress analysis of pressure vessel nozzles.

Academic Achievements:

1. Qualified Gate 2011 exam score: 377 (All India Rank: 344)2. Research paper on “FEM analysis and optimization of two-chamber reactive muffler

by using Taguchi method” is published in “American International Journal of Research in Science, Technology, Engineering & Mathematics, Issue 3, Vol. 1 & 2, page no. 21-28, June-August, 2013”.

Academic Project:

M.Tech Project Name: FEM Analysis and Optimization of Two-Chamber Reactive Muffler by using Taguchi Method.

Duration: July’12 to May’13 (M.Tech. II yr.)Tools: Pro-E (wildfire 4.0), Hypermesh 10.0, LMS Virtual Lab Rev 10-SL1Characterization: This project aimed at studying FEM analysis of reactive muffler by using LMS Virtual Lab software. Taguchi method is used to optimize the muffler's capacity of noise reduction. Optimum model is found out by using S/N ratio analysis and that model is experimentally tested by using two-load method. Effect of various factors such as baffle position, length of extended inlet and outlet tube, porosity of inlet and outlet tube, length and diameter of choke tube are analyzed by Taguchi and ANOVA technique.B.E. Project Name: Vertical Milling AttachmentDuration: July’10 to April’11Role: Team LeadTools: CATIA V-5 R11Characterization: This project aimed at attaching one “separate motor driven vertical spindle head” to the “Horizontal boring machine” which is similar to vertical column milling machine. The objective of the project is to carry out milling operation on the boring machine. Assembly having horizontal spindle, vertical spindle, bevel gear pair, casing, bearing flanges, bearings, motor.

Training Undergone

Training Name: M.Tech. Project Intern.Organization Name: Cummins India Ltd. Pune. (PGBU Dept.)Duration: Aug’12 to Dec’12.Description: Worked as M.Tech project intern in PGBU dept. undertook project on “Exhaust system design for X1.3 (15KVa) genset engine”. Proposed work was to do selection and design of various components of exhaust system like turbocharger, diesel oxidation catalyst, flexible bellow and silencer. Training Name: In plant training (Vocational Training)Organization Name: Menon & Menon Pvt. Ltd. KolhapurDuration: June’2010 to July’2010Description: This training helped to expose to various industrial processes such as Quality Control, Design, Quality Assurance, manufacturing along with providing brief idea about organizational structure & about managerial activities.

Academic Credentials

2013 M.Tech. in Manufacturing Engineering and Automation from College of Engineering, Pune (COEP), (Pune University, Pune) with 8.08/10 CGPA.

2011 B.E. in Production Engineering from K. B. P College of Engineering & Polytechnic, Satara, Shivaji University, Kolhapur with 64.65%.

2007 12th from D. R. Mane College, Kagal, Kolhapur with 59.16%.2005 10th from Doodhaganga Vidyalaya, Kagal, Kolhapur with 79.46%.

Extra-curricular Activities

Effectively organized & worked as the Co-Ordinator of the event “KURUKSHETRA - The ultimate robo war” in QUEST-2010.

Successfully managed “One Day Workshop” on PRO-E wildfire 4.0. Commendably presented paper on “Flexible Manufacturing System” in “Quest-2011”. Honored to be the Board member of the “Placewell Forum” at KBPCOEP, Satara. Keenly participated in university Zonal and various college levels “Kho-Kho” and various

tournaments.

Software Skills

Well versed with CAD software Ansys 13.0, Hypermesh 11.0, Abaqus, LMS virtual Lab, PRO-E (wildfire-4/5), CATIA (V5 R-11), Pv-Elite, Inventor 11.0, Solid-works 9.0, Auto CAD-2010, Minitab, MS Office.

Personal Snippets

Date of Birth: 28th February, 1990Address: A/P Kalammavadi Vasahat, Kagal, Tal-Kagal, Dist.-Kolhapur – 416216.

DeclarationI hereby declare that the above information furnished is true to the best of my knowledge and beliefs.Place : Pune Date : / / 2014 Sandip Shivaji Patil.