1. 1. Emergency Module System
2. 2. Introduction of Sanforce Sanforce Technology (Shenzhen) Co., Ltd is specialized in manufacturing and supply of emergency lighting power products. 7 years of experience in emergency light power supply and more than 15 years of rechargeable NiCD /NiMH battery manufacturing. Capable to provide battery back- up solutions for emergency lighting system.We also dedicate to provide fully bespoke lighting power solutions built to exact client specification.
3. 3. Sanforce Technology Shenzhen LTD Let no power failure leave you in the dark
4. 4. Why emergency lighting is important? Emergency lighting is really essential for any home and public construction. Usually this refers to a lighting fixture that is specifically intended to provide light for a crisis, or power outage.
5. 5. There are also varying types of emergency lighting products, each lending themselves to certain situations in different ways. Some of the most common types are escape route fixtures, emergency standby lighting, and safety lighting.
6. 6. Legal Requirements It is essential that your emergency lighting system conforms to current UK and European regulations. Failure to do so could put you and your business at risk of court proceedings and large fines. Ultimately, you will be risking lives if you do not strictly adhere to all aspects of safety in the workplace. Resources to consider include: The Building Regulations 2000-2005 Edition The Fire Safety Order 2005 The Health & Safety (Safety Signs & Signals) Regulations 1996 Local authorities should also be consulted as they can often have safety license requirements for certain types of premises (e.g. places where the public convene such as pubs and cinemas). Other types of premises (e.g. schools and hospitals) are required to have fire safety inspections.
7. 7. How does emergency light work? Most emergency lighting will run off of battery operated power that you install with the emergency lighting fixtures. This is so that the lights will successfully operate in any situation during a power outage. The most important part is the Emergency Conversion Kit.
8. 8. The control circuit of emergency kit monitors the mains supply, if the light works as normal, the inverter allows the charger to trickle charge the battery pack in standby mode. In the event of an earthquake, explosion, accident or other emergency which results in the AC power supply to fail, the inverter automatically activates the battery backup system and switches the light on in less than 0.1 second. The system can be programmed an emergency running time of 1 /2/ 3 hours depending on different battery packs to meet the requirements under various conditions.
9. 9. What is Emergency Conversion Kit Ideal for integrating into existing control gear Supplied with a fused terminal block and pre-cut connection wires. The modules can be tuned specifically to the lamp, giving better performance for the cell capacity. it provides instant backup lighting when the normal power fails. These units as the name suggests are used for converting existing luminaries into emergency one. Each unit works in conjunction with the existing ballast/LED driver to convert new or existing luminaire fittings into emergency equipment.
10. 10. Emergency Lighting Operation Type Maintained Operation When in maintained operation the lamp of an emergency luminaire stays on constantly at all times and stays lit for the minimum emergency duration after a mains failure. In one word, lamp only lights when mains fail Non-Maintained Operation When in non-maintained operation the lamp of an emergency luminaire will only light in the event of a mains failure and will stay lit for the minimum emergency duration required. In one word, Lamp can light when mains is present and will light when mains fail. Please Note: Maintained units are capable of being wired to enable non-maintained operation. SUSTAINED In the event of mains power failure one of the lamps remain illuminated by automatically getting switched to the integral battery source meanwhile at least two or more lamps is energized during normal mains supply. In one word, There are two lamps, one only works when mains fail and the other only works when mains is present.
11. 11. Easy installation and convenient usage This emergency device can be integrated with the normal LED lighting system and Fluorescent lamp based on specified requirement, e.g. demanded emergency output power/emergency back-up time..etc.
12. 12. Keep you out of darkness ALL THE TIME!
13. 13. Sanforce Technology Shenzhen Co.,Ltd. Add: No.29,Longfeng Road, Longgang District, 518116,Shenzhen, China Tel: +86-755-89648670 Fax: +86-755-89648671 Mobile phone: +86-13530283527 Skype:jenny.emergencypower Email: info@sanforce-tech.com website: www.sanforce-tech.com