sapa solar shading 4550
TRANSCRIPT
Sapa Solar Shading 4550Sun shades that combine function and design
2
Sapa Solar Shading 4550 Bow
The springy bow form lends lightness to the facade. The form reflects the sunshine and can provide indirect, soft lighting for the rooms.
The solar protection can be arranged vertically or horizontally. It can be installed as a self-bearing structure or as a secondary structure on another bearing framework.
The surface treatment can additionally emphasise the form and expression of the profiles.
3
Alternatives 1, 2 and 3: The unattached louvers are installed directly on the bearing profile, which can be arranged vertically or horizontally. The vertical line can be additionally emphasised by installing decorative pro-files from the Expressive family of the Facade system 4150.
Alternative 4: The louvers are screwed to the end/side profiles, which makes it possible to pre-fabricate sections. The sections are installed vertically on aluminium bearing profiles. Only available with Bow louvers 190 mm in this embodiment.
Fittings: Complete set of fittings for fixed installation of louvers at an angle of 0º, 15º, 30º or 45º.
Louvers: 190 or 300 mm wide.
Alternative 1, vertical
Alternative 3, horizontal
Alternative 2, vertical
Alternative 4, vertical
4
Sapa Solar Shading 4550 Wing
As the profile meets the light and the wind in a soft manner, the form takes your thoughts to aerodynamics.
The solar protection can be arranged vertically or horizontally. The Wing, installed in an unbroken line, gives a minimum visual division into sections. It can be installed as a self-bearing structure or as a secondary structure on another bearing fram-ework. The surface finish can additionally emphasise the form and expression of the profile.
5
Alternatives 1 and 3: The unattached louvers are installed directly on the bearing profile, which can be arranged vertically or horizontally. The vertical line can be additionally emphasised by installing decorative profiles from the Expressive family.
Alternative 2: The unattached louvers can be installed directly on the vertical bearing profile or directly into our Add fastening profile in a so-called unbroken line, which gives the impression of a clear direction.
Alternative 4: The louvers are screwed to the end/side profiles, which makes it possible to pre-fabricate sec-tions. The sections are installed vertically on aluminium bearing profiles.
Fittings: Complete set of fittings for fixed installation of louvers at an angle of 0º, 15º, 30º or 45º.
Louvers: 190 or 300 mm wide.
Alternative 1, vertical
Alternative 3, horizontal
Alternative 2, vertical
Alternative 4, vertical
6
Sapa Solar Shading 4550 Box
The uncompromising form lends the facade a strong expression.Modernism in aluminium.
The solar protection can be arranged vertically or horizontally. It can be installed as a self-bearing structure or as a secondary structure on another bearing framework. The surface finish can addi-tionally emphasise the form and expression of the profile.
7
Alternatives 1, 2 and 3: The unattached louvers are installed directly on the bearing profile, which can be arranged vertically or horizontally. The vertical line can be additionally emphasised by installing decora-tive profiles from the Expressive family of the 4150 system.
Alternative 4: The louvers are screwed to the end/side profiles, which makes it possible to pre-fabricate sections. The sections are installed vertically on aluminium bearing profiles. This alternative gives a robust appearance and a clear visual profile.
Fittings: Complete set of fittings for fixed installation of louvers at an angle of 0º, 15º, 30º or 45º.
Louvers: 190 or 300 mm wide.
Surface finish: Anodising or powder coating.
Alternative 1, vertical
Alternative 3, horizontal
Alternative 2, vertical
Alternative 4, vertical
8
Sapa Solar Shading 4550 is suitable in places where external solar protection is needed. The installation of the solar protection is adapted to the facade type.
Architecture and design. Sapa Solar Shading with its three louver types provide a great freedom of choice and a possibility to add and emphasise the architectural values. If required, it can be custom designed. Detail solutions and refined finishing elements are important. It is the entirety that determines which solution is the best one. Every building is unique through its location, use and architecture. We use the three basic designs as the point of departure for our fixed solar protection solutions.
Aluminium is a material that creates good prerequisites for a durable and more resistant solar protection.
Installation method
The choice of Solar Shading installation affects the building’s expression.
Installation examples
Vertical installationHanging consoleBroken louver lines
Vertical installationGround foundationBroken louver lines
Vertical installationSelf-bearing consoleBroken louver lines
Vertical installationSelf-bearing consoleUnbroken louver lines
Horizontal installationConsole with tie-rodBroken louver lines
Vertical installationOn Add-profilUnbroken louver lines
9
Add is a console system with a characteristic slot adapted for adding special facade features.
Read more about Add in the Facade section.
Installation directly in AddAdd fastening profiles mounted on the 4150 facade system offer flexible mounting and the ability to add special facade features. The solar protection fittings can be elegant and simple. Even other important functions, such as lighting, signs, rainwater downpi-pes or lightning conductors, can be installed in the Add profiles.
Simple, with possibilities for future functions.
Read more about Add in the Facade section.
10
Vertical installation with self-bearing console, unbroken louver line
Louvers 4550 Bow, Wing and Box
A
A
BB
A-A
B-B
190
25
35
40
300
300
190
3527.2
32.2
190
300
68830
68836
68834
68840
68842
68841
11
Horizontal installation with self-bearing console, broken louver line
Vertical installation in fastening profile Add, unbroken louver line
A
A
BB
A-A
B-B
A
A
BB
A-A
B-B
12
Vertical installation on ground foundation, broken louver lines
Vertical installation with self-bearing console, broken louver line
A
A
BB
A-A
B-B
A
A
BB
A-A
B-B
13
Vertical hanging assembly, broken line, faceted broken line
Vertical hanging assembly, broken line
A
A
B B
A-A
B-B
A
A
BB
A-A
B-B
14
Bow horizontal installation with angle brackets Wing horizontal installation with end cover plates
Bow vertical installation with angle brackets Wing vertical installation with end cover plates
68840
0°
68840
15°
68840
45°
68840
30°
68830
0°
68830
15°
68830
30°
68830
45°
12081 12082
1208412083
12081 12082
12083 12084
68836
0°
68836
30°
68834
0°
68834
30°
68836
15°
68836
45°
68834
15°
68834
45°
12094 12095
1209712096
12099 12500
1250212501
68840
0°
68830
0°
68840
15°
68830
15°
68840
30°
68830
30°
68840
45°
68830
45°
1208112081
1208212082
1208312083
1208412084
68836
0°
68834
0°
68836
15°
68834
15°
68836
30°
68834
30°
68836
45° 68834
45°
12094 12099
1250012095
12096 12501
1250212097
15
Box horizontal installation with angle brackets Wing horizontal installation with louver brackets
Box vertical installation with angle brackets End cover plates
68841
0°
68841
15°
68841
45°
68841
30°
68842
0°
68842
15°
68842
30°
68842
45°
12081 12082
12083 12084
12081 12082
1208412083
68836
0°
68836
15°
68836
30°
68836
45°
68834
0°
68834
15°
68834
30°
68834
45°
12503 12503
12504
12505
1250612506
12505
12504
68841
0°
68842
0°
68841
15°
68842
15°
68841
30°
68842
30°
68841
45°68842
45°
12081 12081
1208212082
12083 12083
12084
12084
16
Bow, Wing and Box vertical installation in end/side profile
42824 42825
68836
0°
15°
30°
45°
68840
0°
15°
30°
45°
68841
0°
15°
30°
45°
68842
0°
15°
30°
45°
68834
0°
15°
30°
45°
17
Example of horizontal assembly with fixation in Add fastening profile
Example of vertical assembly with fixation in Add fastening profile
Hydro Building Systems Lithuania UABKirtimų g. 47LT-02244 Vilnius T +370 5 210 2587E [email protected]
We
rese
rve
the
right
to m
ake
chan
ges
in th
e pr
oduc
t ran
ge a
nd d
esig
n w
ithou
t prio
r not
ice.
We
rese
rve
the
right
for a
ny p
rintin
g or
typo
grap
hica
l erro
rs.
Sap
a, D
ecem
ber 2
018.