sapnote_0001300796

2
09.03.2012 Page 1 of 2 SAP Note 1300796 - Collective Note: Autom. Configuration for Solution Manager Note Language: English Version: 3 Validity: Valid Since 02.06.2010 Summary Symptom This note covers release-dependent and common information about the automatic configuration with the Configuration Wizard for the Solution Manager 7.0 and 7.1. Other terms Solution Manager, SOLMAN_SETUP, Robomate, Configuration Wizard, CTC Reason and Prerequisites The configuration wizard is a tool running on top of the Netweaver J2EE engine and is embedded in the SOLMAN_SETUP for the SLD configuration. Usually it is not necessary to run the SLD configuration again when you upgrade or update your Solution Manager. The SLD is already configured. However when you execute the configuration again for an existing system used as central SLD, please use the same passwords for the SLDUSER (SLDDSUSER / SLDAPIUSER). In case you change the passwords, the satellite systems can no longer login to the SLD. Solution To get the latest corrections, it is required to update the LM-TOOLS.SCA to the latest available patchlevel of your SPS. Please check your current Solutionmanager SPS and find the corresponding Netweaver SPS below: Solutionmanager 7.0 EHP1 SPS 19 = Netweaver / LMTOOLS 7.01 SPS 03 Solutionmanager 7.0 EHP1 SPS 20, 21, = Netweaver / LMTOOLS 7.01 SPS 04 Solutionmanager 7.0 EHP1 SPS 22 = Netweaver / LMTOOLS 7.01 SPS 05 Solutionmanager 7.0 EHP1 SPS 23, 24 = Netweaver / LMTOOLS 7.01 SPS 06 Solutionmanager 7.0 EHP1 SPS 25, 26 = Netweaver / LMTOOLS 7.01 SPS 07 Solutionmanager 7.1 Initial = Netweaver / LMTOOLS 7.02 SPS 04 Solutionmanager 7.1 SPS 01 = Netweaver / LMTOOLS 7.02 SPS 06 Solutionmanager 7.1 SPS 02 = Netweaver / LMTOOLS 7.02 SPS 07 You can find the latest LMTOOLS patch for the SPS at http://service.sap.com/swdc -> Support Packages and Patches -> Search for Support Packages and Patches. Search for "LIFECYCLE MGMT TOOLS 7.XX SPYY" where XX is the release and YY the SPS level. (e.g. LIFECYCLE MGMT TOOLS 7.1 SP 04) You get two results displayed, initial release of the sca and the latest patch. Download the latest patch, copy the sca to the /usr/sap/trans/EPS/in folder and update the patch using the JSPM with the option "Single Support packages (advanced user only)".

Upload: usbalu

Post on 23-Aug-2014

18 views

Category:

Documents


2 download

TRANSCRIPT

Page 1: sapnote_0001300796

09.03.2012 Page 1 of 2

SAP Note 1300796 - Collective Note: Autom. Configurationfor Solution Manager

Note Language: English Version: 3 Validity: Valid Since 02.06.2010

Summary

SymptomThis note covers release-dependent and common information about theautomatic configuration with the Configuration Wizard for the SolutionManager 7.0 and 7.1.

Other termsSolution Manager, SOLMAN_SETUP, Robomate, Configuration Wizard, CTC

Reason and PrerequisitesThe configuration wizard is a tool running on top of the Netweaver J2EEengine and is embedded in the SOLMAN_SETUP for the SLD configuration.

Usually it is not necessary to run the SLD configuration again when youupgrade or update your Solution Manager. The SLD is already configured.

However when you execute the configuration again for anexisting system used as central SLD, please use the samepasswords for the SLDUSER (SLDDSUSER / SLDAPIUSER). In caseyou change the passwords, the satellite systems can no longerlogin to the SLD.

SolutionTo get the latest corrections, it is required to update the LM-TOOLS.SCA tothe latest available patchlevel of your SPS.

Please check your current Solutionmanager SPS and find the correspondingNetweaver SPS below:

Solutionmanager 7.0 EHP1 SPS 19 = Netweaver / LMTOOLS 7.01 SPS 03Solutionmanager 7.0 EHP1 SPS 20, 21, = Netweaver / LMTOOLS 7.01 SPS 04Solutionmanager 7.0 EHP1 SPS 22 = Netweaver / LMTOOLS 7.01 SPS 05Solutionmanager 7.0 EHP1 SPS 23, 24 = Netweaver / LMTOOLS 7.01 SPS 06Solutionmanager 7.0 EHP1 SPS 25, 26 = Netweaver / LMTOOLS 7.01 SPS 07

Solutionmanager 7.1 Initial = Netweaver / LMTOOLS 7.02 SPS 04Solutionmanager 7.1 SPS 01 = Netweaver / LMTOOLS 7.02 SPS 06Solutionmanager 7.1 SPS 02 = Netweaver / LMTOOLS 7.02 SPS 07

You can find the latest LMTOOLS patch for the SPS athttp://service.sap.com/swdc -> Support Packages and Patches -> Searchfor Support Packages and Patches. Search for "LIFECYCLE MGMT TOOLS 7.XXSPYY" where XX is the release and YY the SPS level.

(e.g. LIFECYCLE MGMT TOOLS 7.1 SP 04)

You get two results displayed, initial release of the sca and the latestpatch. Download the latest patch, copy the sca to the /usr/sap/trans/EPS/infolder and update the patch using the JSPM with the option "Single Supportpackages (advanced user only)".

Page 2: sapnote_0001300796

09.03.2012 Page 2 of 2

SAP Note 1300796 - Collective Note: Autom. Configurationfor Solution Manager

Header Data

Release Status: Released for CustomerReleased on: 12.04.2011 11:59:57Master Language: EnglishPriority: Recommendations/additional infoCategory: CustomizingPrimary Component: BC-INS-CTC-CNT-BS LM Automation Content -Business Suite

Secondary Components:BC-INS-CTC Central technical configuration

Valid Releases

Software Component Release FromRelease

ToRelease

andSubsequent

LM-TOOLS 7.00 7.01 7.02

SP Patch Level

Software Component Version Support Package SP PatchLevel

LIFECYCLE MGMT TOOLS 7.02 SP006 000007

LIFECYCLE MGMT TOOLS 7.02 SP007 000003

LIFECYCLE MGMT TOOLS 7.02 SP008 000002

LIFECYCLE MGMT TOOLS 7.02 SP009 000000