savant® media server: single source · the lightning bolt triangle is used to alert the user to...

Savant® Media Server: Single SourceSMS-001A-xx

Deployment GuideDocument Number: 009-1224-08

Document Date: November 2016

Document Supports: da Vinci 8.2 SMS 5.35.20161111.1

45 Perseverance Way, Hyannis, MA 02601Copyright © 2016 Savant Systems, LLC savant.com | 508.683.2500

!

http://www.savant.com

http://www.savant.com

ContentsTo access the link to the topics in this document, click the topic text or topic page.

Important Safety Information - Read First 3

1. Introduction 4................................................................................................................................................Before You Begin 4

2. Deployment Steps 5

3. SMS-001A Overview 6..................................................................................................................Box Contents and Specifications 6

............................................................................................................................................................Front Panel 6..............................................................................................................................................................Rear Panel 7

................................................................................................................................................................Top Panel 8.............................................................................................................................Supported Audio Playback 8

4. Installation 9.............................................................................................................................................Chassis Installation 9

...................................................................................................................................Wiring and Connections 9.....................................................................................................................................AC Power Connection 10

5. Configuring the Savant Media Server 11................................................................................................................Opening the Configuration Utility 11

....................................................................................................................................................Server Settings 11...................................................................................................................................Date and Time Settings 12

.........................................................................................................................Audio Output Configuration 14.......................................................................Configuring External Storage and Streaming Services 15

6. Managing Content on the SMS 18...........................................................................................................Managing Content Using Mac OS X 18

............................................................................................................Managing Content Using Windows 19

7. RacePoint Blueprint Configuration 20.....................................................................................................Add the SMS-001A to a Configuration 20

..........................................................................Enabling Streaming Services on User Interfaces (UI) 21

Additional Information 22

Appendix A: Network Requirements 23

Appendix B: Document Revision History 24

Appendix C: Firmware Release Information 26

Appendix D: Workflow to Access Streaming Favorite 29

Savant® Media Server: Single Source Deployment GuideSavant® Media Server: Single Source Deployment GuideSavant® Media Server: Single Source Deployment GuideSavant® Media Server: Single Source Deployment Guide Copyright © 2016 Savant Systems, LLC009-1224-08 | 161127 2 of 35

Important Safety Information - Read First

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with a dry cloth.

7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including ampli ers) that produce heat.

9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. If the provided plug does not t into your outlet, consult an electrician for replacement of the obsolete outlet.

10. Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

11. Only use attachments/accessories speci ed by the manufacturer.

12. Use only with a cart, stand, tripod, bracket, or table speci ed by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

13. Unplug this apparatus during lightning storms or when unused for long periods of time.

14. Refer all servicing to quali ed service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

15. Use the mains plug to disconnect the apparatus from the mains.

16. WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE.

17. DO NOT EXPOSE THIS EQUIPMENT TO DRIPPING OR SPLASHING AND ENSURE THAT NO OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES, ARE PLACED ON THE EQUIPMENT.

18. THE MAINS PLUG OF THE POWER SUPPLY CORD SHALL REMAIN READILY OPERABLE.

TO PREVENT ELECTRIC SHOCK DO NOT REMOVE TOP OR BOTTOM COVERS. NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

TO COMPLETELY DISCONNECT THIS EQUIPMENT FROM THE AC MAINS, DISCONNECT THE POWER SUPPLY CORD PLUG FROM THE AC RECEPTACLE. THE MAINS PLUG OF THE POWER SUPPLY CORD SHALL REMAIN READILY OPERABLE.

WATCH FOR THESE SYMBOLS:

The lightning bolt triangle is used to alert the user to the risk of electric shock.

The exclamation point triangle is used to alert the user to important operating or maintenance instructions.

MAGNETIC FIELD

CAUTION! Do not locate sensitive high-gain equipment such as preampli ers or tape decks directly above or below the unit. Because this ampli er has a high power density, it has a strong magnetic eld which can induce hum into unshielded devices that are located nearby. The eld is strongest just above and below the unit.


1. IntroductionThis Deployment Guide will guide the installer through the process of installing, configuring, and adding a Savant Media Server to Blueprint configuration.

Before You BeginRead through this document in its entirety and ensure that the following required items are available:

.........................................................................................................Savant Media Single Source Server (SMS-001A)

......................................................................................Usernames and Passwords to online streaming accounts.

.......................................................................................................................................Savant Host (Smart or Pro Host)

A Smart Host licensed and running da Vinci 6.0.1 or higher

A Pro Host licensed and running da Vinci 7.2 or higher

................................................................................................Savant Development Environment (SDE/MacBook®) RacePoint Blueprint® da Vinci 6.0.1 or higher installed

........................................................................................................Ethernet network meeting Savant requirements See Appendix A: Network Requirements


2. Deployment StepsFollow these steps to successfully deploy an SMS-002A/SMS-005A Savant Media Server. This page can be used as a checklist to record which steps have been completed.

1. ............................................................................Review product specifications and connection details See SMS-001A Overview

2. ...........................................................................................................Install the Savant Media server chassis See Chassis Installation

3. .......................................................................................................Update to the latest version of firmware See Updating Firmware

4. .......................................................................................Configure network communications for the SMS See Server Settings

5. .......................................................................................Configure the audio output and enable AirPlay™ See Audio Output Configuration

6. ..............................................................................................Add external storage and streaming services See Configuring External Storage and Streaming Services

7. .......................................................................................................................Add content the SMS hard drive See Managing Content on the SMS

8. ...............................................................................Add the SMS to a RacePoint Blueprint configuration See RacePoint Blueprint Configuration


3. SMS-001A Overview

Box Contents and SpecificationsRefer to the Quick Reference Guide for this product located on the Savant Community for Box Contents and Specifications.

Front Panel

USB 3.0Single USB 3.0 port: Used to connect to external USB hard disk drive for playback of local content. (HDD not included)

Note: Flash/SSD hard drives are not supported.


Rear Panel

Power Connector

12V DC 36W power connector.

Cooling VentsProvides cooling for the internal components.WARNING! DO NOT block vents in order to maintain proper cooling.

Ethernet

8-pin RJ-45 10/100/1000 Base-T Gigabit auto-negotiating Local Area Network (LAN) port with Link/Activity LEDs.Green LED indicates link statusYellow LED indicates Ethernet activity

Data Rate LEDOff: 10 Mbps data rateYellow: 100 Mbps data rateYellow Blinking: 1000 Mbps data rate

Link LEDOff: Ethernet link is not established.Green Solid: Ethernet link is established.Green Blinking: Ethernet activity is occurring

USB 2.0 Dual USB 2.0 ports: Used to connect to external USB hard disk drive for playback of local content. Flash/SSD hard drives are not supported. (HDD not included)

Audio Out 3.5 mm (1/8 in) Stereo jack for line level audio output: Use included RCA Y adapter cable to connect to Savant SmartAudio chassis or amplifier.

Note:Connections not identified in the diagram above are not functional within a Savant Configuration/Installation.


Top Panel

Power Button

Press to power the SMS-001A On or Off.Blue indicates that the unit is powered on.

HDD LED Solid or Blinking indicates USB External Hard Drive activity. This will increase to solid with more activity.

Supported Audio Playback

Audio FormatsAAC - MPEG-4 part3, aif, aifc, aiff, alac, flac, m4a, m4p, mp2, mp3 - MPEG Layer 3 and WAV up to 24 bit / 96kHz.

Streaming Services Napster, Pandora® Internet Radio, SiriusXM Internet Radio, TIDAL, TuneIn Radio, Slacker, Spotify, add-on URLs for radio stations, guest devices streaming via AirPlay. (Premium services fees may apply.)

See Configuring Streaming Content.

Local SynchronizationMirage Media Sync for Mac and Windows PC. See Syncing Content from Local Computers.


4. Installation

Chassis InstallationThe SMS-001A should be installed on a solid, flat, level surface such as a table or an RCK-5000 2U rack shelf using the four rubber feet that are shipped with the product. The location should be dry, well ventilated, and out of direct sunlight.

Rack Installation Using the RCK-5000 2U Rack Shelf

Wiring and ConnectionsWhen making connections, label the cables with the source and destination. This will make modifications and troubleshooting easier.

Audio ConnectionsSavant recommends the use of shielded RCA interconnects between the media server and the amplifier/switcher to maintain a high level of audio performance. If using a switcher, shielded RCA interconnects should also be used between the switcher and the amplifier.

Typical System Diagram


AC Power Connection IMPORTANT CAUTIONS and WARNINGS!

• The SMS-001A performs network and audio configuration during the initial startup process. See IMPORTANT! Initial Startup Requirements! before applying power to the SMS for first time.

• Do not plug the SMS-001A directly into the “switched accessory” outlet of another device! These outlets are intended for use with low current draw products such as tuners, CD players, Blu-ray players and other similar devices. These outlets are not designed to handle the high current draw of a media server. Using these outlets for a media server is a significant safety hazard.

• Do not remove power from the SMS-001A without shutting the system down properly. If this situation occurs, press the front Power button once. Wait for 2 minutes and press the Power button a second time. This will reboot the SMS-001A.


5. Configuring the Savant Media ServerSMS configuration is performed using the built-in Remote Configuration Utility that can be accessed using a browser running on any computer on the same network.

IMPORTANT! Initial Startup Requirements!

Before Powering on the SMS:• Verify that the SMS is connected to a network router or switch. Refer to Page 7, callout labeled C.

• Verify that all audio outputs are connected. Refer to Page 7, callout labeled G.

Before Configuring the SMS:Check for updates that might be available for the SMS. See Updating Firmware for details.

Opening the Configuration UtilityTo access this utility, open an Internet browser and enter the following:

Mac: http://mms-1.local/config

Windows: http://MIRAGE-1/config

Note:If the name of the SMS under Server Identification has been changed previously, replace MIRAGE-1 with the currently entered name.

Example: http://SMSMain.local/Config or http://SMSMain/Config

Updating Firmware

Firmware for the SMS is installed via the Internet. If an update is available, a message indicating that an update is available and an Add Update Now button will appear under Firmware. If no update is available, the update button will not appear.

1. Open a Remote Configuration Utility session and select the Firmware tab.2. Click Apply Update Now to download and install the available update.3. A process dialog will appear displaying the status of the update.4. Once the update is complete, the SMS will reboot.

Server Settings

The Server Settings tab is used to configure the basic settings for the SMS to communicate with the network.

Server IdentificationA unique name and description can be assigned to the SMS so that it can be easily identified on the network.

Once the name is changed, it must be used to access the SMS configuration utility.

Example: http://SMSMain/Config


http://mms-1.local/config

http://mms-1.local/config

http://MIRAGE-1/config

http://MIRAGE-1/config

Configuration and Remote SecurityBy default, the SMS does not require a password to access the configuration utility or control it from a remote location. To restrict access to the configuration utility, enter a username, password, and recovery email address in the fields under Configuration Security.

To restrict access to control the SMS from a remote location, enter a username, password, and recovery email address in the fields under Remote Control Security.

Date and Time SettingsThese settings are automatically updated in the SMS through a local Network Time Protocol (NTP) server. To use these settings, set the Time zone to match the location of the SMS, the default NTP Server can be used and should only be changed should an issue arise with the time not syncing.


Wired Ethernet ConfigurationThe SMS network connection can be configured to obtain an IP Address from the router using DHCP (default) or be set manually to a static IP Address. Savant recommends that a static IP is used to ensure that the IP Address to the SMS will not change.

To Obtain Network Settings From the Router (DHCP Configuration)Select Autonomic Configuration (DHCP) in the drop-down list.

To Set a Static IP Address (Manual Configuration)Select Manual Configuration (Static IP) in the drop-down list.

Savant recommends that static IP Addresses be outside the range of DHCP assignable addresses. If the routers DHCP range is 1 to 255, use a static IP Address above 255. Example: 1.192.168.256

IMPORTANT!Setting these values incorrectly can prevent the SMS from connecting to the network. Ensure that all network information is correct before saving any changes.

StorageDisplays the current available percentage of storage space for the internal HDD.

LoggingThis is used to send SMS log files to Savant Technical Assistance Center (TAC) for troubleshooting purposes when instructed by a Savant TAC member. Contact Savant Support before uploading logs.

1. Open a Remote Configuration Utility session and select the Server Setting tab.2. In the Your email section, enter the email address used to log into the Savant Community.3. In the Comments section, enter the Support Ticket Number provided by a Savant TAC member.4. Check the Include media database checkbox. This is important, as it will include a copy of the Music

Index File which will also have the Playlist information.5. Click Upload Log Files to send the logs to Savant Support.


UtilitiesClick Restart your server to restart the SMS. During the restart process, the SMS will be unresponsive for 2 to 3 minutes.

Audio Output Configuration

The Source Settings tab is used to configure the audio output jack on the SMS and assign AirPlay® enabled devices to playback content from the SMS.

Server Audio OutputsConfigure the audio output jacks using the following guidelines to ensure that audio can be output with out hindering performance.

Gain Settings

If a Savant controller will be used to control the volume level of the audio:(Recommended Setting)

Select Fixed Gain

If the SMS will be used to control the volume level of the audio: Select Variable Gain

Server Audio Output NameThe name of the server’s audio output can be changed so that it better identifies the SMS as a source.

1. Click the current Name of the output. Example: Main.2. In the open dialog, enter the new name and click Save.

Enabling AirPlay®The SMS can be used as a source on an AirPlay compatible devices.

1. Select the checkbox next to the name of the audio output to enable AirPlay.2. Enter a password to restrict access to the SMS from an AirPlay device. Leave blank if a password is

not used.


Configuring External Storage and Streaming Services

The Content tab allows for configuring access to local digital media that is stored on USB drives and computers, as well as access to streaming cloud based services.

Displaying Album ArtCheck the box to enable Always overlay album art with album and artist name.

Syncing Content from Local ComputersThe Mirage Media Sync software allows for content stored on computers throughout the home to be available for playback through the Savant Media Server. Once the Media Sync software is installed on a computer, content from that computer will appear in the SMS library.

Savant recommends that you DO NOT install Media Sync software on Savant Hosts or on devices that are running Squeeze Server software. If you need to bulk load content from a computer (for example, a Savant Host that contains all of the end user’s music), follow the procedure outlined in Managing Content on the SMS.

Note:While the SMS-001A can access iTunes content, DRM (purchased content) is not supported. Only media that has been ripped from a CD or other medium into iTunes will play on the SMS-001A.

1. From the computer containing the content to sync, open a Remote Configuration Utility session and select the Content tab.

2. Under Media Synchronization, select the link for the operating system on the computer.3. Once the installer has been downloaded to the computer, open the installer and follow the prompts.

When the Mirage Media Sync is running on a computer, the name of the computer will appear in the list of computers under Media Synchronization.

Syncing Content Google DriveContent stored on the SMS can be synced with an Google Drive account for backup.

1. Click Add Account on the Content tab under Online Credentials.2. Enter the account credentials in the open dialog and save.


Adding USB StorageUSB external hard drives can be connected to the SMS and used to add storage space for local permanent content or access content temporarily. Flash/SSD hard drives are not supported.

External USB Drive Requirements• Storage capacity must be 2 TB or less. Drives larger than 2 TB will not be recognized.

• Format must be NTFS or FAT32. Other formats will not be recognized.

To add a USB drive to the SMS:1. Connect a USB drive to the SMS.2. On the Content tab, select Add or Mount next to the connected drive.

• Click Add to use the drive to increase the local storage available to the Savant Media Server.

IMPORTANT!When Add is selected, any existing content on the drive will be erased. This takes place immediately and is irreversible. Once this drive has been added to the SMS, it must remain connected and powered on until removed via this utility.

• Click Mount to access content stored on the drive from the Savant Media Server.

Configuring Streaming ContentStreaming services such as Napster and Spotify are not enabled for use by default. Each service must be selected and have user credentials saved to be accessed.

To enable streaming services:

1. Check the box next to the name of the service.2. Click Add Account and enter the user’s credentials in the Add Account dialog.3. Repeat steps for the other services.


Streaming Service AccountsSome services can have more than one user configured on the SMS. This allows for more than one stream if the service supports multiple users.

Streaming Service Max Accounts Max Streams(per account)

Pandora No Limit No Limit

Napster No Limit 1

SiriusXM No Limit 1

Slacker No Limit 1

Spotify No Limit 1

TuneIn 1 * No Limit

TIDAL** No Limit 1

DEEZER*** No Limit 1

iHeart Radio*** No Limit 1

Murfie No Limit 1

* TuneIn account only required to browse online presets.* TuneIn account only required to browse online presets.* TuneIn account only required to browse online presets.

** Requires SMS 5.2.19257.0 firmware and da Vinci 7.2 or higher.** Requires SMS 5.2.19257.0 firmware and da Vinci 7.2 or higher.** Requires SMS 5.2.19257.0 firmware and da Vinci 7.2 or higher.

*** Requires SMS 5.35.20161111.0 firmware and da Vinci 8.2 or higher.*** Requires SMS 5.35.20161111.0 firmware and da Vinci 8.2 or higher.*** Requires SMS 5.35.20161111.0 firmware and da Vinci 8.2 or higher.

TuneIn ConfigurationAdditional radio stations can be added to TuneIn to expand the amount of content available.

1. Check the TuneIn Radio checkbox.2. Click Configure Local Radio to add local radio stations.3. Click Add Station to add TuneIn radio stations.


6. Managing Content on the SMSThe best method for adding and deleting content on the SMS is to use the Mirage Media Sync software (see Syncing Content from Local Computers) as it will automatically copy and delete content. However, sometimes the software cannot be used when the content is located on a Savant server. Follow the procedures below to copy or delete content from the SMS when Media Sync is not used.

Managing Content Using Mac OS XTo bulk-load songs into a Savant Media Server from a Mac OS X device, perform the following steps:

Notes:

• If you are trying to drag content from iTunes, the easiest way is to drill into the iTunes music folder:/Macintosh HD/Users/<user>/Music/iTunes/iTunes Media/Music

• If you have a large music collection, try and move the music in 10 GB-15 GB data segments, rather than all of the music data at one time.

Using Shared Network Device List1. Open Finder on the computer containing the content and select All under Shared in the left side

menu.2. Select the name of the SMS in the list of devices available on the network. Double-click to open the

device.If the name of the SMS does not appear, see Using SMS IP Address.

3. Open the Music folder on the SMS.4. In a separate Finder window, open the folder containing the music content.5. Drag the music content to the Music folder on the SMS.

To delete content:1. Follow steps 1 to 3 above.2. Select the content to delete in the folder and Delete.

Using SMS IP AddressUse this process if the SMS does not appear in the list of available network devices.

1. Open the Remote Configuration Utility and locate the IP Address on the Server Setting tab.2. Open Finder and select Command + k.3. Enter the following in the Server Address field substituting the IP Address found in step 1:

smb://<ip address>4. Connect as: Guest5. Select Music as the Volume to mount.6. In a separate Finder window, open the folder containing the music content.7. Drag the music content to the Music folder on the SMS.



Managing Content Using WindowsTo bulk-load songs into a Savant Media Server from a Windows device, perform the following steps:

1. Open Windows Explorer.2. Select Network.3. Select the name of the SMS in the list of devices available on the network. Double-click to open the

device.4. Open the Music folder on the SMS.5. In a separate Windows Explorer window, open the folder containing the music content.6. Drag the music content to the Music folder on the SMS.



7. RacePoint Blueprint Configuration IMPORTANT!

• Before performing any configuration, Savant recommends updating to the latest version of firmware. This will ensure that all available features can be configured. See Updating Firmware for details.

• The SMS-001A can be used with either a Smart Host running da Vinci 6.0.1 or higher, or a Pro Host running da Vinci 7.2 or higher.

Add the SMS-001A to a Configuration1. Open the Savant Application Manager (SAM) and select a da Vinci 6.0.1 or above.2. Open Blueprint by selecting the Blueprint button on the right menu within SAM.3. Start a new configuration or edit an existing one.4. Open the Component Library by clicking Show Library on the toolbar.

You can filter the Component Library list by choosing a category and/or manufacturer from the pull-down menus or search for a component directly using the search field.

5. Select SMS-001A and drag and drop it into either the Zone Component List or in the Layout view.

6. In the Layout view, the Media Server name is shown.

7. Enter a unique device name (desired name) and click Create.8. When all of the components have been added to the appropriate zones, close the Components

window by clicking Hide Library in the toolbar.9. Drag any components from Zone Component List into the Layout view if not already there. Avoid

placing components so that they overlap. The Layout view will automatically grow in size if a component is dragged downward or to the right. The zoom level can be changed by adjusting the slider below the Layout view.

10. Start building a configuration with the SMS as shown in the example below in the Layout view. After connecting the SMS, complete the configuration by adding the other required devices.

11. Wire the Data (Ethernet) port to your network device or other Ethernet source as shown.12. After connecting the Ethernet cable, open the Inspector window to inspect the Data (Ethernet)

connection between the SMS-001A and Network Device.


13. Add the IP Address to the Host address: field under the Wire: Data section.

IMPORTANT!URLs/hostnames will not work. An IP Address must be used. Refer to the SMS-001A screen below.

14. Connect the Audio Out to an appropriate input on the device being used for audio distribution.

IMPORTANT!Within Blueprint, the HDMI connection is selectable, but is not used on the SMS-001A. When making the audio connections, the Audio Out must be used to send audio to the system.

Enabling Streaming Services on User Interfaces (UI)By default, the streaming services supported by the SMS are not enabled on the UIs. Each service that is to be used in the system will need to be enabled so that they will appear on the UIs.

1. After adding all components and making all connections within a configuration, click Generate Services.

2. A screen will appear that lists all the services available. Click the checkbox in the Use column to make that service active within the system.


Additional InformationRefer to the following documents located on the Savant Community for additional information.

• Savant Media Server Single Source (SMS-001A) Quick Reference Guide


Appendix A: Network RequirementsSavant requires the use of business class/commercial grade network equipment throughout the network to ensure the reliability of communication between devices. These higher quality components also allow for more accurate troubleshooting when needed.

Device Network ConnectionsConnect all Savant devices to the same local area network (LAN) or subnet as the host. Savant recommends not implementing any type of traffic or packet shaping in your network topology for the Savant devices as this may interfere with performance.

Managing IP AddressesTo ensure that the IP Address will not change due to a power outage, a static IP Address or DHCP reservation should be configured. Savant recommends using DHCP reservation within the router. By using this method, static IP Addresses for all devices can be managed from a single UI avoiding the need to access devices individually.

Setting DHCP ReservationSetting DHCP reservation varies from router to router. Refer to the documentation for the router to configure DHCP reservation.

Network ChangesSavant recommends performing one of the following steps to refresh the IP connection after connecting to a new network, changing routers, or if the IP Address range is changed in the current router. This will reset any IP connection and ensure that the host is communicating with the network correctly.

• Cycle Power

1. Press the Power button on the top of the SMS-001A.2. After the media server completes shutdown, wait 10 seconds and press the Power button to power

the SMS-001A on.

• Hot Plug the Ethernet (LAN) Connection

1. Disconnect the Ethernet (LAN) connection from the controller.2. Wait 15 seconds and then reconnect.


Appendix B: Document Revision History

009-1224-08 - November 2016Section Update

Appendix C: Firmware Release Information

Added release information for SMS 5.35.20161111.1 updates.

009-1224-07 - October 2016Section Update



009-1224-06 - May 2016Section Update



009-1224-05 - July 2015Section Update



009-1224-04 - May 2015Section Update

Streaming Service Accounts

Added information for TIDAL streaming service to table.

Appendixes A-E Reordered for improved flow of information.

Appendix D: Workflow to Access Streaming Favorite

Updated content for improved clarity and best practices.



009-1224-03 - November 2014Section Update

Appendix A Added release information for SMS 5.1.17757.0 updates.


009-1224-02 - July 2014Section Update

2 Updated steps for improved flow and updated to match new sections.

3 Updated supported audio formats for ACC and mp3 MPEG layers in Specifications Table.

5

Updated section with added detail on the use of the configuration utility and what is needed to configure the SMS.Added detail on how to send logs to Savant TAC.Added detail on how to set the audio output.Updated streaming service table to state that Max Streams is per account.

6Expanded Bulk Loading of content section and changed title.Added instructions for deletion of contentAdded Windows OS instructions.

Appendix A Release information for SMS 5.0.16224.0 updates.

Appendix B Added Section: Document revision history.

Appendix C New Section for creating a workflow to access steaming service favorite from a button press or trigger state.



SMS 5.35.20121111.1 November 2016

Software Update FilesFirmware for the SMS is updated using the Firmware Update tab. See Updating Firmware for the steps to update the SMS.

SMS Resolved IssuesThe following issues have been resolved in this SMS release.

• Spotify and Tidal stopped displaying Play Now, Play Next, Replace Queue, and Add to Queue. (SI-2730)

• Spotify not displaying LMQ, Playback Status, and Time Tracking correctly. (SI-1573)

SMS 5.35.20160927.1 October 2016


SMS Enhancements:The following enhancements have been included with this SMS release.

• Rhapsody changed to Napster

• iHeartRadio now supported

• Album art now appears when Music Service playlist/albums/song queues are saved to Savant Playlist

SMS 5.3.21666.0 May 2016


SMS EnhancementsThe following enhancements have been included with this SMS release.

Slacker and SpotifyAlbum Art is now displayed during search through Slacker and Spotify.

TidalExclusive category option is now displayed when navigating in the What's New > Albums or Tracks.

SMS 5.2.19543.0 July 2015


SMS EnhancementsThe following enhancements have been included with this SMS release.

SiriusXM• General Improvements

TuneIn • Refresh metadata Improvements


SMS 5.2.19257.0 May 2015


SMS-001A EnhancementsThe following enhancements have been included with this SMS release.

General• Ability to use an SMS-001A with a Pro Host has been added to da Vinci 7.2. Smart Hosts can still be used

using da Vinci 6.0.1 or higher.

• TIDAL streaming service has been added to the list of existing services.See Configuring Streaming Content for details.

• Artists name now appears in parenthesis next to the song title when searching for a song on the Savant App.

Airplay• Streaming performance has been improved over latent Wi-Fi networks.

• Logging has been improved.

USB Storage• Import function will copy relevant files from the attached drive.

Mirage Sync• Improved handling of iTunes library when library appears empty.

• Improved handling of a new SMS when it has the same IP Address as a previous SMS.

• Added messaging for unreachable server and directory permission error.

Slacker• Added shuffle and repeat to On-demand content.

• Added upgrade message for On-demand content on downgraded accounts.

• Added ability to clear preset queue that does not contain any tracks.

SMS Resolved IssuesThe following issues have been resolved in this SMS release.

SiriusXMPlayback issues with SiriusXM such as channels not playing or dropping out have been resolved. By using the same SiriusXM API (3.0) used for the web service, this upgrade simplifies troubleshooting as well as resolves playback issues.

SCR Specific• SCR 44670 - When selecting Album on the Savant App, play queue options would not appear and the

selected song would begin to play. This has been resolved and the play queue options (Play Now, Play Next, etc) will appear before the album starts to play.

• SCR 45080 - When using Pandora and selecting Switch to MyOtherAccount, the screen would not change. Additionally, if back was selected, the data for the first account would be displayed. This has been resolved, selecting Switch to MyOtherAccount will refresh the data and display the information for the other account.

• SCR 45229 - Scenes created from an existing favorite on the Savant App would not become active. This has been resolved on the Savant App release 7.2 or higher.

General• Enhanced playback of wave files to avoid random loud pop at the end of a track.

• Corrected schedule issues that would exist when a schedule was deleted.

• Mute toggle for zone groups has been enhanced when using an Android device to control the SMS.


AirPlay• Hidden zones in the configuration would appear to be available when using AirPlay. This has been

resolved and hidden should not appear when using AirPlay.

TuneIn• Missing metadata for initial tracks in playlists has been corrected.

Slacker• Issues with favorites caused by rebooting has been corrected.SMS 5.1.17757.0 November 2014

SMS 5.1.17757.0 November 2014


SMS-001A EnhancementsThe following enhancements have been included with this SMS release.

• Added support for the SMS-102A

• Added SiriusXM: 256K streaming

• Added ability to add Slacker tracks to a play queue

SMS-001A Resolved IssuesThe following issues have been resolved in this SMS release.

• Resolved Amazon Login issues


Appendix D: Workflow to Access Streaming FavoriteA button or trigger can be used within TrueControl to access favorites for streaming content such as Pandora through the use of a workflow. Follow these steps to create the workflow that will be used by the button press or trigger.

Retrieve the Favorite GUIDNote:

The SMS cannot access a streaming service favorite twice in a row. In order for this workflow to function, two favorites are required even if only one of them will be a destination favorite for the workflow.

FavoriteA: Favorite to use as a temp to call first in the workflow.For example, if the workflow will call a Pandora favorite, select Napster for FavoriteA.

FavoriteB: Favorite that will be the destination to call second in the workflow.

How to Retrieve the Favorite GUID1. Open the group Audio Query Service on an iOS device and select Favorites.2. Select the blue arrow next to the favorite to use for FavoriteA.3. Write down the GUID that is displayed in the open dialog.4. Select the blue arrow next to the favorite to use for FavoriteB.5. Write down the GUID that is displayed in the open dialog.

Create a Workflow to Play the Favorite1. In Blueprint, View Services and select a zone that has audio. 2. Under General Programable Services, create a workflow under Service Requests with a name that

reflects the favorite action.For Example: SMS_PlayPandoraFavorite

3. Double-click the created workflow to open Automator.4. In the open Automator window, select Library > Other > Savant Media Server and drag it into the

action list. Replace Savant Media Server with the name that was used within the Blueprint configuration.


5. Enter the parameters for FavoriteA using CommandPlayFavorite as the action and the recorded GUID under action arguments.

Service: Savant Media Audio Query [streaming content] ServiceExample: Savant Media Audio Query Pandora Radio Service

Function: Audio output to use. Example: Player_A

Resource: Savant Live Media Query [streaming content] SourceExample: Savant Live Media Query Pandora Source

Action: CommandPlayFavorite

Action Argument: FavoriteA GUID recorded in Retrieve the Favorite GUID

6. Duplicate the action.7. Enter the parameters for FavoriteB using CommandPlayFavorite as the action and the recorded

GUID under action arguments.

Service: Savant Media Audio Query [streaming content] ServiceExample: Savant Media Audio Query Pandora Radio Service

Function: Audio output to use. Example: Player_A

Resource: Savant Live Media Query [streaming content] SourceExample: Savant Live Media Query Pandora Source

Action: CommandPlayFavorite

Action Argument: FavoriteB GUID recorded in Retrieve the Favorite GUID


8. Save the workflow.

9. Quit Automator and save the configuration in Blueprint.

Create a Workflow to Power On the SMS1. In Blueprint, View Services and select a zone that has audio. 2. Under General Programable Services, create a workflow under Service Requests with a name that

reflects the favorite action.For Example: SMS_PowerOnHomeTheater

3. Double-click the created workflow to open Automator.4. In the open Automator window, select Library > Other > Send Service Request and drag it into the

action list.5. Enter the following values for each parameter in the action.

Zone: Zone to Power On

Service:

[Zone]-[SMS BP Name] Media Server-Main-1-SVC_AV_LIVEMEDIAQUERY_SAVANTMEDIAAUDIO_[Streaming Content]Example: Room 1-Savant Media Server-Player_A-1-SVC_AV_LIVEMEDIAQUERY_SAVANTMEDIAAUDIO_Pandora

Event: PowerOn


Create a Workflow to Run the Other Workflows 1. In Blueprint, View Services and select a zone that has audio. 2. Under General Programable Services, create a workflow under Service Requests with a name that

reflects the favorite action.For Example: SMS_ButtonPlayPandoraFavorite

3. Double-click the created workflow to open Automator.4. In the open Automator window, select Library > Other > Send Service Request and drag it into the

action list.5. Select Use Config. This is required so that the workflow created in step 2 appears in the list of

available actions.6. Enter the appropriate values to use the SMS_PowerOnHomeTheater action created in step Create a

Workflow to Power On the SMS.

Zone: Zone that the favorite will be activated in

Service: [Zone]-Host Name]--1-SVC_GEN_GENERICExample: Home Theater-Savant System Host--1-SVC_GEN_GENERIC

Event: [Name of workflow created in step Create a Workflow to Power On the SMS]Example: SMS_PowerOnHomeTheater

7. Duplicate the action.8. Enter the appropriate values to use the SMS_PlayPandoraFavorite action created in step Create a

Workflow to Play the Favorite.

Zone: Zone that the favorite will be activated in

Service: [Zone]-Host Name]--1-SVC_GEN_GENERICExample: Home Theater-Savant System Host--1-SVC_GEN_GENERIC

Event: [Name of workflow created in step Create a Workflow to Play the Favorite]Example: SMS_PlayPandoraFavorite


9. Save the workflow.

The workflow is now complete and can be used with a button press or trigger state.

Note:• The process will need to be duplicated on an individual zone basis for every zone that will have access to

the workflow.

• To have the favorite play in a group of zones, duplicate the Send Service Request in the SMS_PowerOnHomeTheater and SMS_ButtonPlayPandoraFavorite workflows.


Important Notice

DisclaimerSavant Systems, LLC. reserves the right to change product specifications without notice, therefore, the information presented herein shall not be construed as a commitment or warranty.

Savant Systems, LLC. shall not be liable for any technical or editorial errors or omissions contained herein or for incidental or consequential damages resulting from the performance, furnishing, reliance on, or use of this material.

PatentsCertain equipment and software described in this document is protected by issued and pending U.S. and foreign patents.

All products and services are trademarks or registered trademarks of their respective manufacturer.

CopyrightThis document contains confidential and proprietary information protected by copyright. All rights reserved. Copying or other reproduction of all or parts of this document is prohibited without the permission of Savant Systems.

Trademarks© 2015 Savant Systems, LLC. All rights reserved. Savant, Savant App, Savant Host, Now You Can, RacePoint Blueprint, Single App Home, TrueCommand, TrueControl, and the Savant logo are trademarks of Savant Systems, LLC.

AirPlay, Apple, AirPort Express, AirPort Extreme, Apple TV, Apple Remote Desktop, FireWire, iMac, iTunes, iPad, iPad mini, iPad Air, iPhone, MacBook, Mac and OS X are trademarks or trade names of Apple Inc. iOS is a trademark of Cisco®. Android, Google, Google Play, and other Google marks are trademarks of Google, Inc. Wi-Fi is a registered trademark of the Wi-Fi Alliance®. HDMI® is a trademark of HDMI Licensing, LLC.

All other brand names, product names, and trademarks are the property of their respective owners.

Technical and Sales SupportSavant Systems, LLC is dedicated to providing prompt and effective support in a timely and efficient manner.

• To contact Savant Support, access the Savant Customer Community and enter a support Case ticket.

• To contact Savant Sales, visit Savant.com and select Contact Us to locate a local sales representative in your area.


RegulatoryThe following statements are applicable to Savant Media Server SMS-001A.

FCC Regulations15.19. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) these devices must accept any interference received, including interferences that may cause undesired operation.

15.21. The changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

15.105. This equipment has been tested and found to comply with the limits for CLASS B digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a residential environment. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications, However there is no guarantee that interference will not occur in a particular installation, If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try correct the interference by one or more of the following measures:

- Reorient or relocate the receiving circuit different from that to which receiver is connected.

- Increase the separation between the equipment and the receiver.

- Consult the dealer or experienced radio/TV technician for help.


savant® media server: single source · the lightning bolt triangle is used to alert the user to...

Documents