schedule of accreditation united kingdom accreditation service · iso/iec 17065:2012 to provide...
TRANSCRIPT
Assessment Manager: CR Page 1 of 25
Schedule of Accreditation issued by
United Kingdom Accreditation Service
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
0259
Accredited to ISO/IEC 17065:2012 to
provide product conformity certification
FM Approvals Ltd
Issue No: 015 Issue date: 10 November 2017
1 Windsor Dials
Windsor
Berkshire
SL4 1RS
Contact: Mr Andrew Was
Tel: +44 (0)1753 750 475
Fax: +44 (0)1753 750 029
E-Mail: [email protected]
Website: www.fmapprovals.com
Locations where certification activities covered by the above Accreditation Standard are undertaken
1 Windsor Dials Windsor Berkshire SL4 1RS
0259
Accredited to
ISO/IEC 17065:2012 to provide product conformity certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Trees , Cher t sey Lane, S ta i nes -upon-Thames , TW 18 3HR, UK
FM Approvals Ltd
Issue No: 015 Issue date: 10 November 2017
Assessment Manager: CR Page 2 of 25
DETAIL OF ACCREDITATION
Product Standard
Electrical and non-electrical apparatus, systems, devices and components for potentially explosive gas, dust or vapour atmospheres using the following protection concepts:
General requirements Flameproof enclosures ‘d’ Increased safety ‘e’ Intrinsic safety ‘i’ Encapsulation ‘m’ Type of protection ‘n’ Oil immersion ‘o’ Pressurised apparatus ‘p’ Powder filling ‘q’ Protection by enclosure “tD” Protection by enclosure “t” Type of Protection “pD” Protection by intrinsic safety “iD” Protection by encapsulation “mD” Protection by flow restricting enclosures ‘fr’ Protection by flameproof enclosures ‘d’ Protection by constructional safety ‘c’ Protection by control of ignition source ‘b’ Protection by liquid immersion ‘k’ Intrinsically safe electrical systems Fieldbus intrinsically safe concept (FISCO) and fieldbus non-incendive concept (FNICO) Flame arresters, performance requirements, test methods, and limits for use Reciprocating Internal Combustion Engines for use in potentially explosive atmospheres Group I engines for workings susceptible to firedamp and/or combustible dust Group II engines for flammable dust atmospheres Safety of Industrial trucks
To the essential health and safety requirements of Directive 94/9/EC and EN, prEN and other documents as appropriate. Details of the specific FM, IEC, EN, BS, and other standards covered please refer to FM Approvals document CM 007.
Fire detection and fire alarm systems Control and indicating equipment
EN 54-2
Fire detection and fire alarm systems. Power supply equipment
EN 54-4
0259
Accredited to
ISO/IEC 17065:2012 to provide product conformity certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Trees , Cher t sey Lane, S ta i nes -upon-Thames , TW 18 3HR, UK
FM Approvals Ltd
Issue No: 015 Issue date: 10 November 2017
Assessment Manager: CR Page 3 of 25
Product Standard
At the last review of CM 007 the following standards were included within the scope of accreditation, other standards may have since been added using the flexible scope arrangement
Fire detection and fire alarm systems. Heat detectors. Point detectors
EN 54-5
Fire detection and fire alarm systems. Flame detectors. Point detectors.
EN 54-10
Fire detection and fire alarm systems. Short-circuit isolators
EN 54-17
Fire detection and fire alarm systems. Input/output devices
EN 54-18
Explosion prevention and protection Basic concepts and methodology
EN 1127-1
Industrial Trucks EN 1755
Group II engines for flammable gas and vapour atmospheres
EN 1834-1
Group I engines for workings susceptible to firedamp and/or combustible dust
EN 1834-2
Group II engines for use in flammable dust atmospheres
EN 1834-3
Fixed firefighting systems. Components for gas extinguishing systems. Requirements and test methods for electrical automatic control and delay devices
EN 12094-1
Flame arrestors EN 12874
0259
Accredited to
ISO/IEC 17065:2012 to provide product conformity certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Trees , Cher t sey Lane, S ta i nes -upon-Thames , TW 18 3HR, UK
FM Approvals Ltd
Issue No: 015 Issue date: 10 November 2017
Assessment Manager: CR Page 4 of 25
Product Standard
Non Electrical Equipment - General Requirements EN 13463-1
Protection by flow restricting enclosure "fr" EN 13463-2
Protection by flameproof enclosure 'd' EN 13463-3
Non Electrical Equipment - Constructural Safety EN 13463-5
Protection by control of ignition source “b” EN 13463-6
Non Electrical Equipment - Liquid Immersion EN 13463-8
At the last review of CM 007 the following standards were included within the scope of accreditation, other standards may have since been added using the flexible scope arrangement (cont’d)
EN 13980 (obsolete)
Potentially explosive atmospheres. Application of quality systems.
Explosive atmospheres. Application of quality systems for equipment manufacture.
EN 80079-34 IEC 80079-34
Cranes - Power driven winches and hoists - Part 1: Power driven winches
EN 14492-1
Cranes - Power driven winches and hoists - Part 2: Power driven hoists
EN 14492-2
Electrostatic hand-held spraying equipment EN 50050
Electrical apparatus for the detection and measurement of oxygen - performance requirements and test methods
EN 50104
0259
Accredited to
ISO/IEC 17065:2012 to provide product conformity certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Trees , Cher t sey Lane, S ta i nes -upon-Thames , TW 18 3HR, UK
FM Approvals Ltd
Issue No: 015 Issue date: 10 November 2017
Assessment Manager: CR Page 5 of 25
Product Standard
Specification for open path apparatus for the detection of combustible or toxic gases and vapours - Part 1: General requirements and test methods
EN 50241-1
Performance requirements for apparatus for the detection of combustible gases
EN 50241-2
Electrical apparatus for explosive gas atmospheres: General requirements - General requirements
EN 50014:1998 (obsolete) IEC 60079-0 FM 3600
Flameproof enclosures ‘d’ EN 50018:2000 (obsolete)
IEC 60079-1 EN 60079-1 FM 3615
Degrees of protection provided by enclosures EN 60529
At the last review of CM 007 the following standards were included within the scope of accreditation, other standards may have since been added using the flexible scope arrangement (cont’d)
Pressurised apparatus ‘p’ EN 50016:2002 (obsolete)
IEC 60079-2 EN 60079-2 FM 3620
Powder filling ‘q’ EN 50017
IEC 60079-5 EN 60079-5
Oil immersion ‘o’ EN 50015
IEC 60079-6
Increased safety ‘e’ EN 50019:2000 (obsolete)
IEC 60079-7
0259
Accredited to
ISO/IEC 17065:2012 to provide product conformity certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Trees , Cher t sey Lane, S ta i nes -upon-Thames , TW 18 3HR, UK
FM Approvals Ltd
Issue No: 015 Issue date: 10 November 2017
Assessment Manager: CR Page 6 of 25
Product Standard
Intrinsic safety ‘i’ EN 50020:2002 (obsolete)
IEC 60079-11 FM 3610
Type of protection ‘n’ BS EN 50021:1999 (obsolete)
IEC 60079-15 FM 3611
Encapsulation ‘m’ EN 50028:1987 (obsolete)
IEC 60079-18 EN 60079-18
Intrinsically safe electrical systems EN 50039:1980 (obsolete)
IEC 60079-25 FM 3610
Equipment Group II Category IG/Zone 0 EN 50284:1999 (obsolete)
IEC 60079-26 EN 60079-26
At the last review of CM 007 the following standards were included within the scope of accreditation, other standards may have since been added using the flexible scope arrangement (cont’d)
Electrical apparatus for explosive gas atmospheres. Fieldbus intrinsically safe concept (FISCO) and fieldbus non-incendive concept (FNICO)
IEC 60079-27
Protection of equipment and transmission systems using optical radiation
IEC 60079-28
Detectors for flammable gases IEC 60079-29-1
Electrical resistance trace heating IEC 60079-30-1
Electrical Apparatus for use in dust atmospheres General requirements
IEC 61241-0:2006 (obsolete)
0259
Accredited to
ISO/IEC 17065:2012 to provide product conformity certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Trees , Cher t sey Lane, S ta i nes -upon-Thames , TW 18 3HR, UK
FM Approvals Ltd
Issue No: 015 Issue date: 10 November 2017
Assessment Manager: CR Page 7 of 25
Product Standard
Electrical apparatus for use in the presence of combustible dust: Electrical apparatus protected by enclosures: Section 1: Specification for apparatus
EN 50281-1-1:1999 (obsolete)
Protection by enclosure “tD” Protection by enclosure “t”
IEC 61241-1 EN 60079-31
Electrical apparatus for use in the presence of combustible dust: Type of protection 'pD'
IEC 61241-4
Protection by intrinsic safety “iD” IEC 61241-11
Protection by encapsulation “mD” IEC 61241-18
Electrical apparatus for the detection and measurements of combustible gases - General requirements
IEC 61779-1 ISA 12.13.01 FM 6310-20
At the last review of CM 007 the following standards were included within the scope of accreditation, other standards may have since been added using the flexible scope arrangement (cont’d)
Performance requirements for Group I apparatus indicating up to 5% (V/V) methane in air
IEC 61779-2
Performance requirements for Group I apparatus indicating up to 100%(V/V) methane in air
IEC 61779-3
Performance requirements for Group II apparatus indicating up to 100% lower explosive limit
IEC 61779-4
Performance requirements for Group II apparatus indicating up to 100% (V/V) gas
IEC 61779-5
0259
Accredited to
ISO/IEC 17065:2012 to provide product conformity certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Trees , Cher t sey Lane, S ta i nes -upon-Thames , TW 18 3HR, UK
FM Approvals Ltd
Issue No: 015 Issue date: 10 November 2017
Assessment Manager: CR Page 8 of 25
Product Standard
Where IEC or EN standards have exact equivalents in BS, EN, BS EN or ISA Standards, these BS, EN, BS EN or ISA standards are also included in the accreditation.
Products used in construction, falling under the following product areas:
Fire alarm/detection, fixed fire-fighting, fire and smoke control and explosion suppression products Roofing Walls and ceilings Thermal insulating products
To the essential requirements of Directive 89/106/EEC and EN, prEN and other documents as appropriate. Details of the specific FM, IEC, EN, ETAG, BS and other standards covered please refer to FM Approvals document CM 007.
At the last review of CM 007 the following standards were included within the scope of accreditation, other standards may have since been added using the flexible scope arrangement.
Panels (as internal or external finishes in walls or ceilings subject to reaction to fire regulations)
EN 438-7
At the last review of CM 007 the following standards were included within the scope of accreditation, other standards may have since been added using the flexible scope arrangement (cont’d)
Prefabricated accessories for roofing. Individual roof lights of plastics.
EN 1873
Smoke and heat control systems – natural smoke and heat exhaust ventilators
EN 12101-2
Nozzles/sprinklers/outlets (Fire safety) EN 12259-1
Wet alarm valve assemblies (Fire safety) EN 12259-2
Dry alarm valve assemblies (Fire safety) EN 12259-3
Sprinklers and water spray systems-kits (Fire safety) EN 12259-4
0259
Accredited to
ISO/IEC 17065:2012 to provide product conformity certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Trees , Cher t sey Lane, S ta i nes -upon-Thames , TW 18 3HR, UK
FM Approvals Ltd
Issue No: 015 Issue date: 10 November 2017
Assessment Manager: CR Page 9 of 25
Product Standard
Water flow detectors/switches (Fire safety) EN 12259-5
Deluge values (Fire safety) prEN 12259-9
Pumps (Fire safety) prEN 12259-12
Thermal insulation products for buildings. Factory made mineral wool (MW) products
EN 13162
Factory made products of expanded polystyrene (EPS) EN 13163
Factory made products of extruded polystyrene foam (XPS)
EN 13164
At the last review of CM 007 the following standards were included within the scope of accreditation, other standards may have since been added using the flexible scope arrangement (cont’d)
Factory made rigid polyurethane foam (PUR) products EN 13165
Factory made products of phenolic foam (PF) EN 13166
Factory made cellular glass (CG) products EN 13167
Factory made wood wool (WW) products EN 13168
Factory made products of expanded perlite (EPB). EN 13169
Factory made products of expanded cork (ICB). EN 13170
Factory made wood fibre (WF) products EN 13171
0259
Accredited to
ISO/IEC 17065:2012 to provide product conformity certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Trees , Cher t sey Lane, S ta i nes -upon-Thames , TW 18 3HR, UK
FM Approvals Ltd
Issue No: 015 Issue date: 10 November 2017
Assessment Manager: CR Page 10 of 25
Product Standard
Geosynthetic barriers - Characteristics required for use in the construction of reservoirs and dams
EN 13361
Characteristics required for use in the construction of canals
EN 13362
Characteristics required for use in the construction of liquid waste disposal sites, transfer stations or secondary containment
EN 13492
Geosynthetic barriers. Characteristics required for use in the construction of solid waste storage and disposal sites.
EN 13493
Flexible sheets for waterproofing. Reinforced bitumen sheets for roof waterproofing
EN 13707
At the last review of CM 007 the following standards were included within the scope of accreditation, other standards may have since been added using the flexible scope arrangement (cont’d)
Curtain wallings EN 13830
Flexible sheet for waterproofing.
Underlays for discontinuous roofing EN 13859-1
Underlays for walls EN 13859-2
Flexible sheet for waterproofing. Plastic and rubber sheets for roof waterproofing.
EN 13956
Flexible sheets for waterproofing. Plastic and rubber damp proof sheets including plastic and rubber basement tanking sheet.
EN 13967
0259
Accredited to
ISO/IEC 17065:2012 to provide product conformity certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Trees , Cher t sey Lane, S ta i nes -upon-Thames , TW 18 3HR, UK
FM Approvals Ltd
Issue No: 015 Issue date: 10 November 2017
Assessment Manager: CR Page 11 of 25
Product Standard
Thermal insulation products for building equipment and industrial installations - Factory made mineral wool (MW) products
EN 14303
Thermal insulation products for building equipment and industrial installations - Factory made flexible elastomeric foam (FEF) products
EN 14304
Thermal insulation products for building equipment and industrial installations - Factory made cellular glass (CG) products
EN 14305
Thermal insulation products for building equipment and industrial installations - Factory made calcium silicate (CS) products
EN 14306
At the last review of CM 007 the following standards were included within the scope of accreditation, other standards may have since been added using the flexible scope arrangement (cont’d)
Thermal insulation products for building equipment and industrial installations - Factory made extruded polystyrene foam (XPS) products
EN 14307
Thermal insulation products for building equipment and industrial installations - Factory made rigid polyurethane foam (PUR) and polyisocyanurate foam (PIR) products
EN 14308
Thermal insulation products for building equipment and industrial installations - Factory made products of expanded polystyrene (EPS)
EN 14309
Thermal insulation products for building equipment and industrial installations - Factory made polyethylene foam (PEF) products
EN 14313
0259
Accredited to
ISO/IEC 17065:2012 to provide product conformity certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Trees , Cher t sey Lane, S ta i nes -upon-Thames , TW 18 3HR, UK
FM Approvals Ltd
Issue No: 015 Issue date: 10 November 2017
Assessment Manager: CR Page 12 of 25
Product Standard
Thermal insulation products for building equipment and industrial installations - Factory made phenolic foam (PF) products
EN 14314
Self-supporting double skin metal faced insulating panels. Factory made products.
EN 14509
Coverings in roll form (as internal finishes in walls or ceilings subject to reaction to fire regulations)
EN 14716
Roof coverings. Continuous rooflights of plastics with or without upstands.
EN 14963
Pedestrian doorsets, industrial, commercial, garage doors and openable windows. Product standard, performance characteristics. Fire resisting and/or smoke control characteristics.
EN 16034
Internal partition kits (for uses subject to reaction to fire requirements)
ETAG 003
At the last review of CM 007 the following standards were included within the scope of accreditation, other standards may have since been added using the flexible scope arrangement (cont’d)
Liquid applied roof waterproofing kits (for uses subject to reaction to fire regulations)
ETAG 005
Systems of mechanically fastened flexible roof waterproofing membranes including the system of fastening, jointing and edging, and sometimes thermal insulation, limited to continuous watertight systems based on flexible sheets (for roof waterproofing)
ETAG 006
Self-supporting translucent roof kits (except glass based kits)
ETAG 010
0259
Accredited to
ISO/IEC 17065:2012 to provide product conformity certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Trees , Cher t sey Lane, S ta i nes -upon-Thames , TW 18 3HR, UK
FM Approvals Ltd
Issue No: 015 Issue date: 10 November 2017
Assessment Manager: CR Page 13 of 25
Product Standard
Self-supporting composite lightweight panels
General ETAG 016-1 Self-supporting Composite Lightweight Panels for use in roofs
ETAG 016-2
Self-supporting composite lightweight panels for use in external walls and claddings
ETAG 016-3
Self-supporting composite lightweight panels for use in internal walls and ceilings
ETAG 016-4
Fire Protective Products
General ETAG 018-1 Reactive coatings for fire protection of steel elements ETAG 018-2
Renderings and rendering kits intended for fire resisting applications
ETAG 018-3
Fire Protective board, slab and mat products and kits ETAG 018-4 At the last review of CM 007 the following standards were included within the scope of accreditation, other standards may have since been added using the flexible scope arrangement (cont’d)
Cold storage premises kits Cold storage room kits ETAG 021-1 Cold storage building envelope and building kits ETAG 021-2
0259
Accredited to
ISO/IEC 17065:2012 to provide product conformity certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Trees , Cher t sey Lane, S ta i nes -upon-Thames , TW 18 3HR, UK
FM Approvals Ltd
Issue No: 015 Issue date: 10 November 2017
Assessment Manager: CR Page 14 of 25
Product Standard
Firestopping and firesealing products
General ETAG 026-1 Penetration seals ETAG 026-2 Linear joint and gap seals ETAG 026-3
Where IEC or EN standards have exact equivalents in BS, EN or BS EN Standards, these BS, EN or BS EN standards are also included in the accreditation.
The certification systems used for the above are one or more of the following: Type testing or examination Product evaluation Design appraisal These can be coupled with assessment and surveillance of production, the supplier’s quality system and/or installation sites.
Where appropriate a European Technical Approval, or EC Type Examination Certificate, or Certificate or Statement of Conformity, or FM Approvals Certificate Will be issued to the supplier along with (if relevant) the right to use the appropriate mark of conformity.
END
0259
Accredited to
ISO/IEC 17065:2012 to provide product conformity certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Trees , Cher t sey Lane, S ta i nes -upon-Thames , TW 18 3HR, UK
FM Approvals Ltd
Issue No: 015 Issue date: 10 November 2017
Assessment Manager: CR Page 15 of 25
Accreditation for the purpose of Notified Body Activity taking into account EA2/17 and relevant requirements of ISO/IEC 17025
Directive / Regulation
Conformity Assessment procedure/ Module/article
Category of products or individual products
Essential requirements: Product specification / Properties/Standards
The Construction Products Regulation EU) No 305/2011
Annex V- Product Certification Body (AVCP) System 1
96/577/EC Fire alarm/detection, fixed fire-fighting, fire and smoke control and explosion suppression products (1/1)
EN 12101-2:2003 EN 12259-1:1999+ A1:2001 EN 12259-1:1999+A1:01/A2:04 EN 12259-1:1999+A1:01/A3:06 EN 12259-2:1999/A1:2001 EN 12259-2:1999/A2:2005 EN 12259-2:1999/AC:2002 EN 12259-3:2000/A1:2001 EN 12259-3:2000/A2:2005 EN 12259-4:2000/A1:2001 EN 12259-5:2002
Annex V- Product Certification Body (AVCP) System 1
96/580/EC Curtain wallings (1/1)
EN 13830:2003
Annex V- Product Testing Laboratory (AVCP) System 3
96/580/EC Curtain wallings (1/1)
EN 13830:2003
Annex V- Production Control Certification Body (AVCP) System 2+
96/581/EC Geotextiles (1/2)
EN 13361:2004 EN 13361:2004/A1:2006 EN 13362:2005 EN 13492:2004 EN 13492:2004/A1:2006 EN 13493:2005
Annex V- Product
Certification Body (AVCP) System 1
98/436/EC Roof coverings, rooflights, roof windows and ancillary products (2/6)
EN 14509:2006 EN 14509:2006/AC:2008 EN 14509:2013
0259
Accredited to
ISO/IEC 17065:2012 to provide product conformity certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Trees , Cher t sey Lane, S ta i nes -upon-Thames , TW 18 3HR, UK
FM Approvals Ltd
Issue No: 015 Issue date: 10 November 2017
Assessment Manager: CR Page 16 of 25
Directive / Regulation
Conformity Assessment procedure/ Module/article
Category of products or individual products
Essential requirements: Product specification / Properties/Standards
The Construction Products Regulation (EU) No 305/2011 (cont’d)
Annex V- Product Testing Laboratory (AVCP) System 3
98/436/EC Roof coverings, rooflights, roof windows and ancillary products (2/6)
EN 14509:2013
Annex V- Product
Certification Body (AVCP) System 1
98/436/EC Roof coverings, rooflights, roof windows and ancillary products (2/6)
EN 14963:2006 EN 1873:2005
Annex V- Product
Testing Laboratory (AVCP) System 3
98/436/EC Roof coverings, rooflights, roof windows and ancillary products (2/6)
EN 14963:2006 EN 1873:2005
Annex V- Product
Certification Body (AVCP) System 1
98/437/EC Internal and external wall and ceiling finishes (3/5)
EN 14716:2004
Annex V- Product
Testing Laboratory (AVCP) System 3
98/437/EC Roof coverings, rooflights, roof windows and ancillary products (2/6)
EN 14716:2004
Annex V- Product
Certification Body (AVCP System 1
98/437/EC Internal and external wall and ceiling finishes (3/5)
EN 14509:2006 EN 14509:2006/AC:2008 EN 14509:2013 EN 438-7:2005
Annex V- Product
Testing Laboratory (AVCP)
System 3
98/437/EC Internal and external wall and ceiling finishes (3/5)
EN 14509:2013 EN 438-7:2005
0259
Accredited to
ISO/IEC 17065:2012 to provide product conformity certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Trees , Cher t sey Lane, S ta i nes -upon-Thames , TW 18 3HR, UK
FM Approvals Ltd
Issue No: 015 Issue date: 10 November 2017
Assessment Manager: CR Page 17 of 25
Directive / Regulation
Conformity Assessment procedure/ Module/article
Category of products or individual products
Essential requirements: Product specification / Properties/Standards
The Construction Products Regulation (EU) No 305/2011 (cont’d)
Production Control Certification Body (AVCP) System 2+
99/90/EC Membranes (1/3) : - Roof sheets (in buildings).
EN 13707:2004+A2:2009 EN 13956:2005 EN 13956:2005/AC:2006 EN 13956:2012
Production Control
Certification Body (AVCP) System 2+
99/90/EC Membranes (1/3) : - Damp proofing sheets (in buildings).
EN 13967:2004 EN 13967:2004/A1:2006 EN 13967:2012
Annex V- Product
Certification Body (AVCP) System 1
99/90/EC Membranes (2/3)
EN13859-1:2005+A1:2008 EN 13859-1:2010 EN 13859-2:2010
Annex V- Product
Certification Body (AVCP) System 1
99/90/EC Membranes (2/3) : - Roof sheets (for uses subject to reaction to fire regulations).
EN 13707:2004+A2:2009 EN 13956:2005 EN 13956:2005/AC:2006 EN 13956:2012
Annex V- Product
Certification Body (AVCP) System 1
99/90/EC Membranes (2/3) : - Roof underlays (for uses subject to reaction to fire regulations).
EN 13859-1:2005+A1:2008 EN 13859-1:2010
Annex V- Product
Testing Laboratory (AVCP) System 3
99/90/EC Membranes (2/3) : - Roof underlays (for uses subject to reaction to fire regulations).
EN 13859-1:2010 EN 13859-2:2010
Annex V- Product
Testing Laboratory (AVCP) System 3
99/90/EC Membranes (2/3) : - Roof underlays (for uses subject to reaction to fire regulations).
EN 13707:2004+A2:2009 EN 13956:2012
0259
Accredited to
ISO/IEC 17065:2012 to provide product conformity certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Trees , Cher t sey Lane, S ta i nes -upon-Thames , TW 18 3HR, UK
FM Approvals Ltd
Issue No: 015 Issue date: 10 November 2017
Assessment Manager: CR Page 18 of 25
Directive / Regulation
Conformity Assessment procedure/ Module/article
Category of products or individual products
Essential requirements: Product specification / Properties/Standards
The Construction Products Regulation (EU) No 305/2011 (cont’d)
Annex V- Product Certification Body (AVCP) System 1
99/91/EC Thermal insulating products (2/2)
EN 13162:2008 EN 13162:2012 EN 13162:2012 + A1:2015 EN 13163:2008 EN 13163:2012 EN 13163:2012 + A1:2015 EN 13164:2008 EN 13164:2012 EN 13164:2012 + A1:2015 EN 13165:2008 EN 13165:2012 EN 13165:2012 + A1:2015 EN 13166:2008 EN 13166:2012 EN 13166:2012 + A1:2015 EN 13167:2008 EN 13167:2012 EN 13167:2012 + A1:2015 EN 13168:2008 EN 13168:2012 EN 13168:2012 + A1:2015 EN 13169:2008 EN 13169:2012 EN 13169:2012 + A1:2015 EN 13170:2008 EN 13170:2012 EN 13170:2012 + A1:2015 EN 13171:2008 EN 13171:2012 EN 13171:2012 + A1:2015 EN 14303:2009 EN 14304:2009
EN 14303:2009+A1:2013 EN 14304:2009+A1:2013 EN 14305:2009+A1:2013 EN 14306:2009+A1:2013
EN 14307:2009+A1:2013
0259
Accredited to
ISO/IEC 17065:2012 to provide product conformity certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Trees , Cher t sey Lane, S ta i nes -upon-Thames , TW 18 3HR, UK
FM Approvals Ltd
Issue No: 015 Issue date: 10 November 2017
Assessment Manager: CR Page 19 of 25
Directive / Regulation
Conformity Assessment procedure/ Module/article
Category of products or individual products
Essential requirements: Product specification / Properties/Standards
The Construction Products Regulation (EU) No 305/2011 (cont’d)
Annex V- Product Certification Body (AVCP) System 1,
96/577/EC Fire alarm/detection, fixed fire-fighting, fire and smoke control and explosion suppression products (1/1)
EN 54-2:1997 EN 54-2:1997/A1:2006 EN 54-2:1997/AC:1999 EN 54-4:1997 EN 54-4:1997/A1:2002 EN 54-4:1997/A2:2006 EN 54-4:1997/AC:1999 EN 54-10:2002 EN 54-10:2002/A1:2005
Annex V- Product
Testing Laboratory (AVCP)
System 3
99/91/EC Thermal insulating products (2/2)
EN 13162:2012 EN 13162:2012 + A1:2015 EN 13163:2012 EN 13163:2012 + A1:2015 EN 13164:2012 EN 13164:2012 + A1:2015 EN 13165:2012 EN 13165:2012 + A1:2015 EN 13166:2012 EN 13166:2012 + A1:2015 EN 13167:2012 EN 13167:2012 + A1:2015 EN 13168:2012 EN 13168:2012 + A1:2015 EN 13169:2012 EN 13169:2012 + A1:2015 EN 13170:2012 EN 13170:2012 + A1:2015 EN 13171:2012 EN 13171:2012 + A1:2015 EN 14303:2009+A1:2013 EN 14304:2009+A1:2013 EN 14305:2009+A1:2013 EN 14306:2009+A1:2013 EN 14307:2009+A1:2013 EN 14308:2009+A1:2013 EN 14309:2009+A1:2013 EN 14313:2009+A1:2013 EN 14314:2009+A1:2013
0259
Accredited to
ISO/IEC 17065:2012 to provide product conformity certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Trees , Cher t sey Lane, S ta i nes -upon-Thames , TW 18 3HR, UK
FM Approvals Ltd
Issue No: 015 Issue date: 10 November 2017
Assessment Manager: CR Page 20 of 25
Directive / Regulation
Conformity Assessment procedure/ Module/article
Category of products or individual products
Essential requirements: Product specification / Properties/Standards
The Construction Products Regulation (EU) No 305/2011 (cont’d)
Annex V- Product Certification Body (AVCP) System 1
99/91/EC Thermal insulating products (2/2)
EN 14305:2009 EN 14306:2009 EN 14307:2009 EN 14308:2009 EN 14309:2009 EN 14313:2009 EN 14314:2009
Annex V- Product
Certification Body (AVCP) System 1
98/213/EC Internal partition kits (1/5)
ETAG 003
Annex V- Product
Certification Body (AVCP) System 1
98/599/EC Liquid applied roof waterproofing kits (3/3)
ETAG 005
Annex V-
Production Control Certification Body (AVCP) System 2+
98/143/EC Systems of mechanically fastened flexible roof waterproofing membranes (1/1)
ETAG 006
Annex V-
Test Laboratory System 3,
98/600/EC Self-supporting translucent roof kits (except glass-based kits) (2/3)
ETAG 010
0259
Accredited to
ISO/IEC 17065:2012 to provide product conformity certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Trees , Cher t sey Lane, S ta i nes -upon-Thames , TW 18 3HR, UK
FM Approvals Ltd
Issue No: 015 Issue date: 10 November 2017
Assessment Manager: CR Page 21 of 25
Directive / Regulation
Conformity Assessment procedure/ Module/article
Category of products or individual products
Essential requirements: Product specification / Properties/Standards
The Construction Products Regulation (EU) No 305/2011 (cont’d)
Annex V- Product Certification Body (AVCP) System 1
98/600/EC Self-supporting translucent roof kits (except glass-based kits) (3/3)
ETAG 010
Annex V-
Test Laboratory System 3,
2000/447/EC Prefabricated wood-based load-bearing stressed skin panels and self-supporting composite lightweight panels (2/6)
ETAG 016 – 1 ETAG 016 – 2 ETAG 016 – 3 ETAG 016 – 4
Annex V- Product
Certification Body (AVCP) System 1
99/454/EC Fire stopping, fire sealing and fire protection products (1/2)
ETAG 018 – 1 ETAG 018 – 2 ETAG 018 – 3 ETAG 018 – 4 ETAG 018 – 4 Amendment ETAG 026 – 1 ETAG 026 - 2 Version 08/2011 ETAG 026 - 3 Version 08/2011
Annex V- Product
Certification Body (AVCP) System 1
99/454/EC Fire stopping, fire sealing and fire protective products (2/2)
ETAG 018 – 1 ETAG 018 – 2 ETAG 018 – 3 ETAG 018 – 4 ETAG 018 – 4 Amendment ETAG 026 – 1 ETAG 026 – 2 ETAG 026 - 2 Version 08/2011 ETAG 026 – 3 ETAG 026 - 3 Version 08/2011
ETAG 026 – 4 ETAG 026 – 5
Annex V- Product
Certification Body (AVCP) System 1
2000/447/EC Prefabricated wood-based load-bearing stressed skin panels and self-supporting composite lightweight panels (3/6)
ETAG 016 - 1 ETAG 016 - 2 ETAG 016 - 3 ETAG 016 - 4
0259
Accredited to
ISO/IEC 17065:2012 to provide product conformity certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Trees , Cher t sey Lane, S ta i nes -upon-Thames , TW 18 3HR, UK
FM Approvals Ltd
Issue No: 015 Issue date: 10 November 2017
Assessment Manager: CR Page 22 of 25
Directive / Regulation
Conformity Assessment procedure/ Module/article
Category of products or individual products
Essential requirements: Product specification / Properties/Standards
The Construction Products Regulation (EU) No 305/2011 (cont’d)
Annex V- Product Certification Body (AVCP) System 1
2003/728/EC Metal frame building kits, concrete frame building kits, prefabricated building units, cold storage room kits and rock-fall protection kits : - Cold storage room kits (in building works).
ETAG 021 – 1 ETAG 021 – 2
Annex V- Product
Certification Body (AVCP) System 1
2005/484/EC Cold storage building kits and cold storage building envelope kits : - Cold storage building kits and cold storage building envelope kits (in building works).
ETAG 021 – 2
As a Technical
Assessment Body (TAB) for developing European Assessment Documents
Annex IV – TAB Product Areas
2 Doors, Windows, Shutters, Gates, and Related Building Hardware
3 Membranes, including liquid applied and kits (for water and/or water vapour control). 4 Thermal insulation products. composite insulating kits/systems. 8 Geotextiles, geomembranes, and related products. 9. Curtain walling/cladding/ structural sealant glazing.
0259
Accredited to
ISO/IEC 17065:2012 to provide product conformity certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Trees , Cher t sey Lane, S ta i nes -upon-Thames , TW 18 3HR, UK
FM Approvals Ltd
Issue No: 015 Issue date: 10 November 2017
Assessment Manager: CR Page 23 of 25
Directive / Regulation
Conformity Assessment procedure/ Module/article
Category of products or individual products
Essential requirements: Product specification / Properties/Standards
The Construction Products Regulation (EU) No 305/2011 (cont’d)
As a Technical Assessment Body (TAB) for developing European Assessment Documents (cont’d)
Annex IV – TAB Product Areas (cont’d)
10 Fixed fire fighting equipment (fire alarm/detection, fixed firefighting, fire and smoke control and explosion suppression product.) 18 Waste Water Engineering Products 21 Internal & external wall and ceiling finishes. internal partition kits. 22 Roof coverings, roof lights, roof windows, and ancillary products, roof kits.
35 Fire stopping, fire sealing and fire protective products, fire retardant products.
Equipment Intended for use in Potentially Explosive Atmospheres (ATEX) 94/9/EC (As Amended) Implemented in UK law by: The Equipment and Protective Systems Intended for use in Potentially Explosive Atmospheres Regulations 1996, No 192 (As Amended)
Annex III / Schedule 6 EC-Type examination Annex IV /Schedule 7 Production QA Annex V / Schedule 8 Product verification Annex VI / Schedule 9 Conformity to type Annex VII / Schedule 10 Product QA
Equipment in :- Equipment group I, categories M1 and M2. Equipment group II, categories 1, 2 and 3.
Storage of Technical files
Essential Health and Safety Requirements, Annex II of the Directive and Schedule 3 of the Regulations Acknowledgement of receipt and retention of technical files
0259
Accredited to
ISO/IEC 17065:2012 to provide product conformity certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Trees , Cher t sey Lane, S ta i nes -upon-Thames , TW 18 3HR, UK
FM Approvals Ltd
Issue No: 015 Issue date: 10 November 2017
Assessment Manager: CR Page 24 of 25
Directive / Regulation
Conformity Assessment procedure/ Module/article
Category of products or individual products
Essential requirements: Product specification / Properties/Standards
Equipment Intended for use in Potentially Explosive Atmospheres (ATEX) 94/9/EC (As Amended) Implemented in UK law by: The Equipment and Protective Systems Intended for use in Potentially Explosive Atmospheres Regulations 1996, No 192 (As Amended) (cont’d)
Annex IX / Schedule 12 Unit verification Article 8 (1) (b) (ii), Regulation 10 (3)(b) iii)
Equipment in :- Equipment group I, categories M1 and M2. Equipment group II, categories 1, 2 and 3. Components covering protection concepts for electrical equipment - 'd', 'e', 'i', 'm', 'n', 'o', 'p', 'q', 'tD', 'pD', 'iD', 'mD' non-electrical equipment - fr, d, c, b, k protective systems - venting, suppression, flame arresters, decoupling, explosion resistant enclosure safety-related devices - 94/9/EC Annex II clause 1.5 Storage of Technical files
Essential Health and Safety Requirements, Annex II of the Directive and Schedule 3 of the Regulations Acknowledgement of receipt and retention of technical files
0259
Accredited to
ISO/IEC 17065:2012 to provide product conformity certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Trees , Cher t sey Lane, S ta i nes -upon-Thames , TW 18 3HR, UK
FM Approvals Ltd
Issue No: 015 Issue date: 10 November 2017
Assessment Manager: CR Page 25 of 25
Directive / Regulation
Conformity Assessment procedure/ Module/article
Category of products or individual products
Essential requirements: Product specification / Properties/Standards
Equipment and Protective Systems Intended for use in Potentially Explosive Atmospheres (ATEX) 2014/34/EU (As Amended) Implemented in UK law by: (To be completed after publication of the UK SI)
Annex III EC-Type examination Annex IV Production QA Annex V Product verification Annex VI Conformity to type Annex VII Product QA Annex IX
Equipment in :- Equipment group I, categories M1 and M2. Equipment group II, categories 1, 2 and 3. For: Components, Protective systems, and Safety devices
Essential Health and Safety Requirements, Annex II of the Directive
Unit verification Article 13 (1) (b) (ii), Storage of Technical files Acknowledgement of receipt and
retention of technical files
END