Machinery Questions

Round Baler Parts Identification

Instructions: Identify the parts shown below. (2 points each)Word Bank

1. _______ A. PTO Shaft2. _______ B. Net Wrap3. _______ C. Pick Up Area

D. Warning LightsE. Roller Baffles

Tractor 120-200hp Parts Identification

Instructions: Identify the parts shown below. (2 points each)Word Bank

4. ______ A. Fuel Filter5. _______ B. Turbocharger6. _______ C. Battery Terminal Jumper7. _______ D. AC Compressor8. _______ E. Injection Pump

Multiple Choice Questions: Answer the following questions using the attached picture of an operator’s manual.

9. How often should the oil be changed?a. 50 hoursb. 100 hoursc. 250 hoursd. 500 hours

10. Which of the following should be done once every year?a. Inspect hydraulic hosesb. Inspect seat beltc. Change the fuel filterd. A & B

Parts Identification Picture Bank

1. 2.

3. 4.

5. 6.

7. 8.

9 and 10.

Machinery Problem Solving ActivityUse the following website to answer the questions to this scenario. You will be using an online platform of John Deere Parts Catalog.

Website: https://partscatalog.deere.com/jdrc/

Scenario:

Farmer Nick is getting ready to plant soybeans and is doing a little maintenance on his John Deere 7810 tractor (Serial Number: 089999). Nick wants to change the fuel, oil, and air filters before starting to plant. To make sure he obtains the right parts from his local John Deere Dealership, he wants to check on the parts diagram to write down the part numbers for the correct filters. Using the link provided, identify the correct part numbers for the Fuel and Oil filters for this 7810.

Fuel Filter Part Number: ________________

Oil Filter Part Number: _________________

Several days after performing this service on the 7810, the tractor is having a hard time starting… it is losing prime in the fuel system. After talking with his local John Deere Dealership he now knows that the Check Valve on the fuel filter housing is the culprit. The part number for this part is RE54244 per the John Deere Parts Catalog.

What is the name of the part that goes in between the check valve and the fuel line?

Part Name: _________________

If Nick operates this tractor engine and burn 5 gal/hr, how many theoretical horsepower would you make? SHOW ALL YOUR WORK. (4 pts.) ____________________

Helpful Conversions: 1 gal=139,000 Btu 1 hp=2545 Btu/hr

Nick is planting with an 8 row John Deere 7000 planter. If he is planting corn on 30 in rows, how many acres will he cover in 1 hour if he is traveling at an average speed of 4.5 mph.

Helpful Conversions: 1 acre=43,560 sq. ft 1 mile=5280 ft