scoptel ip pbx software - scopserv€¦ · scopteltm ip pbx software sangoma transcoding solution...
TRANSCRIPT
ScopTELTM IP PBX Software
ScopTELTM IP PBX Software
Sangoma Transcoding Installation
ScopTELTM IP PBX Software
2
Sangoma Transcoding Solution
Purpose of Document • Depending on the Sangoma Hardware Transcoding SKU the solution can
support between 30 and 4000 simultaneous G.729 sessions
• Hardware transcoding off loads CPU cycles from the host CPU and does not
require software G.729 licenses
• Hardware transcoding reduces transcoding delay
• High Compression CODEC’s allow more concurrent calls through Internet
connections with modest bandwidth.
• Voice Transcoding can reduce costs where bandwidth is expensive and VoIP is
desired to further reduce costs and increase mobility
ScopTELTM IP PBX Software
3
Sangoma Transcoding Solution
Example: Sangoma D-150
• D-150 Box installed in local LAN communicates with ScopTEL using
Ethernet by IP address
• Scales from 30 to 400 simultaneous G.729 sessions
G.729 ITSP
ScopTELTM IP PBX Software
Sangoma Transcoding Solution
CODEC SUPPORT • G.711
• GSM-FR
• G.722
• GMS-EFR
• G.722.1 (HD Voice)
• G.726
• G.729AB
• iLBC
Sample Applications • Call Centers and Remote Agent Pools
• Hosted iPBX / IP Centrex
• Distributed PBX
• IP Network Peering
• SIP Trunking
• VoIP Gateways
ScopTELTM IP PBX Software
Pre-requisites • scopserv-server 2.4.1 package
• You must be using minimum version scopserv-telephony 2.6.18-2.rpm
• Internet connection to download installation packages
• D-150 with Boxed Enclosure
ScopTELTM IP PBX Software
• Login to the server and navigate to:
• Server>Packages Manager>Versions Information
ScopTELTM IP PBX Software
• Scroll down until you see wanpipe-sng-tc
• If the package is not already installed then Click to Install
ScopTELTM IP PBX Software
• Installation Summary
ScopTELTM IP PBX Software
• Navigate to:
• Telephony>Configuration>Channels>Media Transcoding and Edit
• Select the Network Interface that matches the location of your D-150
• Choose a Base IP Octet that will not conflict with any DHCP scope or static IP address
• Choose the desired CODEC’s
• Save
ScopTELTM IP PBX Software
• Navigate to Telephony>Configuration>Channels>Codecs
• Check the Set Codec Preferred Order? [x]
• Check the Set Default Codec selection? [x]
• Choose the preferred order and enable the desired Codecs in the list
• Ignore the G.729 (Not Installed) warning as this only applies to software CODEC’s
• Save
ScopTELTM IP PBX Software
• Navigate to Telephony>Configuration>Extensions>
• Edit: <extension>>Phone Options
• Check the G.729 CODEC option
• If you want to use only G.729 then uncheck all other CODEC’s
• Ignore the G.729 (Not Installed) warning as this only applies to software CODEC’s
• Save
ScopTELTM IP PBX Software
• Navigate to Telephony>Configuration>Interfaces>VoIP Accounts
• Edit: <VoIP Account>>Options
• Check the G.729 CODEC option
• If you want to use only G.729 then uncheck all other CODEC’s
• Ignore the G.729 (Not Installed) warning as this only applies to software CODEC’s
• Save
ScopTELTM IP PBX Software
• Navigate to Telephony>General
• Commit
• Edit: Services
ScopTELTM IP PBX Software
• Check the box to enable the Sangoma Media Transcoding (SNG TC) daemon
• Apply Change
ScopTELTM IP PBX Software
• If the Sangoma Media Transcoding (SNG TC) daemon is not running then start it
• If the Sangoma Media Transcoding (SNG TC) daemon is running then Restart Service
• You must restart the Telephony Server for the Sangoma Media Transcoding (SNG TC) daemon
to take effect
ScopTELTM IP PBX Software
16