scotgrip product brochure

28
In the workplace, ‘Slips and Trips’ make up one of the highest accident statistics. Our products are uniquely designed to eliminate these accidents even in the harshest working environments. Scotgrip ® safety products incorporate the unique Scotgrip ® high-traction, anti-slip safety surface which gives a sound foot-holding in the most extreme conditions. These tough and durable products are manufactured under BS EN IS0 9001:2008 quality controlled conditions comprising of a reinforced composite base and a graded aggregate surface. As a Scotgrip ® quality standard, these products are fire rated, spark and friction tested. Be assured our standards are high and the safety of your personnel is paramount. Eliminates ‘Slips and Trips’ Cost effective High traction anti-slip safety products Tough and durable Standard sizes and custom made Fully guaranteed Fire rated, spark and friction tested Non corrosive Easy to fit Reflects positively on personnel performance Scotgrip (UK) Limited are manufacturers of high quality, heavy duty anti-slip safety products for stairways, walkways, decks, ladders, ramps and gangways and is well established as the leading force in heavy duty, anti-slip safety products primarily for drilling rigs, oil and gas production platforms, marine vessels and paper mills worldwide. Providing safety solutions to industry Ref: SCGR Intro Issue No: 1 Issue Date: Mar 2010 Page No: 1 of 2 No. 10041261 No. 23136 FQM Facilitators Quality Management Scotgrip ® Anti-Slip Safety Products Manufacturers of heavy duty, anti-slip safety products

Upload: mark-prise

Post on 22-Nov-2014

866 views

Category:

Documents


1 download

DESCRIPTION

 

TRANSCRIPT

Page 1: Scotgrip Product Brochure

In the workplace, ‘Slips and Trips’ make up one of the

highest accident statistics. Our products are uniquely

designed to eliminate these accidents even in the

harshest working environments.

Scotgrip® safety products incorporate the unique

Scotgrip® high-traction, anti-slip safety surface

which gives a sound foot-holding in the most extreme

conditions. These tough and durable products are

manufactured under BS EN IS0 9001:2008 quality

controlled conditions comprising of a reinforced

composite base and a graded aggregate surface.

As a Scotgrip® quality standard, these products are fire

rated, spark and friction tested.

Be assured our standards are high and the safety of

your personnel is paramount.

• Eliminates‘SlipsandTrips’

• Costeffective

• Hightractionanti-slipsafetyproducts

• Toughanddurable

• Standardsizesandcustommade

• Fullyguaranteed

• Firerated,sparkandfrictiontested

• Noncorrosive

• Easytofit

• Reflectspositivelyonpersonnelperformance

Scotgrip(UK)Limitedaremanufacturersofhighquality,heavydutyanti-slipsafetyproductsforstairways,walkways,decks,ladders,rampsandgangwaysandiswellestablishedastheleadingforceinheavyduty,anti-slipsafetyproductsprimarilyfordrillingrigs,oilandgasproductionplatforms,marinevesselsandpapermillsworldwide.

Providingsafetysolutionstoindustry

Ref: SCGR Intro Issue No: 1

Issue Date: Mar 2010 Page No: 1 of 2

No. 10041261No. 23136

FQMFacilitators Quality Management

Scotgrip®Anti-SlipSafetyProducts

Manufacturersofheavyduty,anti-slipsafetyproducts

Page 2: Scotgrip Product Brochure

HigH-TRACTioNANTi-SLiP

Scotgrip® safety products will provide a sound foot-holding even in the mostextreme conditions and will eliminate ‘Slips and Trips’ in your working environment.

Surface grades: High Profile – 6mm aggregate (1/4” approx.) Low Profile – 3mm aggregate (1/8” approx.) Fine Profile – 1mm aggregate (1/16” approx.)

HigHLyviSibLE

Colour coded in a wide range of colour schemes to suit individual locations.Colour codes are: safety yellow, black/safety yellow, black, green, grey, blue, red, white. fluorescent and photoluminescent finishes Other colours available – please ask.

HEAvydUTy

Scotgrip® safety products are extremely durable and remain highly effectivefor many years.

STANdARdSizESoRToCUSToMERSPECiFiCATioN

Scotgrip® safety products are manufactured in a wide range of standardsizes. We regularly manufacture custom sizes to suit individual locations.

EASEoFiNSTALLATioN

Scotgrip® safety products are designed for quick and secure fitting, either bymechanical fixings, welding or bonding to existing surfaces. These products arepre-drilled where required for quick installation. Scotgrip® products are non-loadbearing and must have a suitable underlying structure to be secured to.We recommend our own fastening systems and adhesives for securing Scotgrip®

anti-slip safety products

QUALiTy–iT’SwHATdRivESUS

All Scotgrip® products are manufactured under BS EN ISO 9001:2008 qualitycontrolled conditions using highly compatible raw materials at our premisesin Banchory, UK.

FURTHERSCoTgRiP®PRodUCTS

This data sheet is an introduction to the full Scotgrip® anti-slip product range that we manufacture. If you would like individual product details/sizes, please refer to our datasheets for each product. These can be found under the Datasheets heading on our website: www.scotgrip.com

StepintoasaferenvironmentwithScotgrip®

© Copyright 2010. Scotgrip® is a registered trademark of Scotgrip (UK) LimitedScotgrip (UK) Limited may make changes to the design and manufacturing processes of Scotgrip®

anti-slip safety products as part of a continuous programme of improvement and innovation.

SCoTgRiP®oRdERiNg/ENQUiRyiNFoRMATioNWhen ordering Scotgrip® anti-slip safety products, please send us the following details:

Product Type:

Quantity:

Size:

Colour:

Surface grade:

If fixings are required, please advise which type of surface you are securing to: (e.g. open grating/grille, chequered plate, flat steel, concrete, wood):For installation details, please go to the Technical section of

our website: www.scotgrip.com

Forfurtheradviceorinformationcontact:Scotgrip (UK) Limited, Silverbank Industrial Estate, North Deeside Road, Banchory, Kincardineshire AB31 5YR, UKTel: + 44 (0) 1330 825335 Fax: + 44 (0) 1330 825260

Scotgrip (UK) Limited, Westchase Center, 2500 City West Boulevard, Suite 300, Houston, Texas 77042, USATel: + 1 (713) 267 2243 Fax: + 1 (713) 267 2267

e-mail: [email protected] website: www.scotgrip.comRegistered in Edinburgh, Scotland No SC130388 VAT Reg. No. GB553 1222 78 D-U-N-S No 76-676-9954 (Dun & Bradstreet)

Scotgrip®Anti-SlipSafetyProducts Ref: SCGR Intro Issue No: 1 Issue Date: Mar 2010 Page No: 2 of 2

SAFETyFoRSTAiRwAyS

Product CodePremier Stair Nosing SSNFootsure Stair Nosing FSNSafegrip® Stair Nosing GSNPremier Stair Tile SSTKicker Tread® KTS

SAFETyFoRLAddERS

Product CodeLadder Rung Covers (Square) LRCS Ladder Rung Covers (Round) LRCR

SAFETyFoRwALKwAySANddECKS

Product CodeGrating Cover Tile SGCTDecktile SDTWeld Decktile SWDTFlextile IFTSDrillmate® SDM

SAFETyFoRbRidgES/RAMPSProduct CodePipe/cable bridge PCB1 to PCB5 (5 different sizes)General Purpose Ramps GP1 to GP4 (4 different sizes)Stepmate Custom Please advise design req’d

SAFETyFoRgANgwAyS

Product CodeGangway Tread (Step) GW1Gangway Tread (Bar) GW2Gangway Tread (Elliptical) GW3

SigNALERTSAFETyMARKiNg

The ‘SignAlert’ safety marking system can be added to virtually all Scotgrip® anti-slip safety products.

PHoToLUMiNESCENTFiNiSHES

GW1 GW2 GW3

We can offer long lasting photoluminescent properties as an extra safety feature

Page 3: Scotgrip Product Brochure

The leading edge of a step is the most dangerous part,

especially if it has been damaged, worn smooth or

rounded by constant use. By installing Scotgrip® Premier

stair products not only is this slip hazard eliminated but

the lifespan of the step is greatly increased. These heavy

duty products are easily fitted onto open grating/grille,

chequered plate, concrete or wood.

Calluswithyourrequirements.Eliminate‘SlipsandTrips’onyourstairways.

• Eliminates‘SlipsandTrips’

• Costeffective

• Hightractionanti-slipsafetyproducts

• Toughanddurable

• Standardsizesandcustommade

• Fullyguaranteed

• Firerated,sparkandfrictiontested

• Noncorrosive

• Easytofitoverexistingsteps

• Reflectspositivelyonpersonnelperformance

Scotgrip®PremierstairproductsincorporatetheuniqueScotgrip®high-tractionanti-slipsafetysurfacewhichgivesasoundfoot-holdinginthemostextremeconditions.ThesetoughanddurableproductsaremanufacturedunderbSENiS09001:2008qualitycontrolledconditionscomprisingofareinforcedcompositebaseandagradedaggregatesurface.AsaScotgrip®

qualitystandard,theseproductsarefirerated,sparkandfrictiontested.

Providingsafetysolutionstoindustry

Ref: SCGR Premier Issue No: 1

Issue Date: Mar 2010 Page No: 1 of 2

No. 10041261No. 23136

FQMFacilitators Quality Management

Stairways-Premier

Manufacturersofheavyduty,anti-slipsafetyproducts

Page 4: Scotgrip Product Brochure

HigH-TRACTioNANTi-SLiP

Scotgrip® Premier stair products will provide a sound foot-holding even in the most extreme conditions and will eliminate ‘Slips and Trips’ in your working environment.

Surface grades: High Profile – 6mm aggregate (1/4” approx.) Low Profile – 3mm aggregate (1/8” approx.) Fine Profile – 1mm aggregate (1/16” approx.)

HigHLyviSibLE

Colour coded in a wide range of colour schemes to suit individual locations.Colour codes are: safety yellow, black/safety yellow, black, green, grey, blue, red, white. fluorescent and photoluminescent finishes Other colours available – please ask.

HEAvydUTy

Scotgrip® Premier stair products are extremely durable and remain highly effectivefor many years.

STANdARdSizESoRToCUSToMERSPECiFiCATioN

Scotgrip® Premier stair products are manufactured in a wide range of standardsizes (see table opposite). We regularly manufacture custom sizes to suit individual locations.

EASEoFiNSTALLATioN

Scotgrip® Premier stair products are designed for quick and secure fitting, either by mechanical fixings or bonding to existing surfaces. These products are pre-drilled where required for quick installation. Scotgrip® products are non-load bearing and must have a suitable underlying structure to be secured to.

QUALiTy–iT’SwHATdRivESUS

All Scotgrip® products are manufactured under BS EN ISO 9001:2008 qualitycontrolled conditions using highly compatible raw materials at our premisesin Banchory, UK.

FURTHERSCoTgRiP®PRodUCTS

If you would like to view the full Scotgrip® anti-slip safety product range that we manufacture, please look at our website: www.scotgrip.comwhere you will find all of our available products and details.

StepintoasaferenvironmentwithScotgrip®

© Copyright 2010. Scotgrip® is a registered trademark of Scotgrip (UK) LimitedScotgrip (UK) Limited may make changes to the design and manufacturing processes of Scotgrip®

anti-slip safety products as part of a continuous programme of improvement and innovation.

SCoTgRiP®oRdERiNg/ENQUiRyiNFoRMATioNWhen ordering Scotgrip® anti-slip safety products, please send us the following details:

Product Type:

Quantity:

Size:

Colour:

Surface grade:

If fixings are required, please advise which type of surface you are securing to: (e.g. open grating/grille, chequered plate, flat steel, concrete, wood):

Forfurtheradviceorinformationcontact:Scotgrip (UK) Limited, Silverbank Industrial Estate, North Deeside Road, Banchory, Kincardineshire AB31 5YR, UKTel: + 44 (0) 1330 825335 Fax: + 44 (0) 1330 825260

Scotgrip (UK) Limited, Westchase Center, 2500 City West Boulevard, Suite 300, Houston, Texas 77042, USATel: + 1 (713) 267 2243 Fax: + 1 (713) 267 2267

e-mail: [email protected] website: www.scotgrip.comRegistered in Edinburgh, Scotland No SC130388 VAT Reg. No. GB553 1222 78 D-U-N-S No 76-676-9954 (Dun & Bradstreet)

Stairways-Premier Ref: SCGR Premier Issue No: 1 Issue Date: Mar 2010 Page No: 2 of 2

PRodUCTS Code

Scotgrip® Premier anti-slip stair nosing SSNScotgrip® Premier anti-slip stair tile SST

FiTTiNgdATA

FiXiNgHoLEPoSiTioN

If fixing holes are to be pre-drilled the following information is required:

We recommend our own fastening systems forsecuring Scotgrip® products.

STANdARdSizES

Custom sizes also available. Standard lip size on stair nosing is 30mm (1" approx.)

For installation details, please go to the Technical section of our website: www.scotgrip.com

Fittingonto: Method

Open grating/grille Type ‘S’ fixings (saddle assemblies)

Chequered plate Self tap screws or nut, bolt and washer

Concrete HPS impact fixingsWood screws or adhesive

40 80 100 130 160 200 260

inches 11/2 3 4 5 6 8 10

450 18 ✔ ✔ ✔ ✔ ✔ ✔ ✔

600 24 ✔ ✔ ✔ ✔ ✔ ✔ ✔

750 30 ✔ ✔ ✔ ✔ ✔ ✔ ✔

900 36 ✔ ✔ ✔ ✔ ✔ ✔ ✔

1200 48 ✔ ✔ ✔ ✔ ✔ ✔ ✔

LEN

gTH

bREAdTH (dEPTH)mm

Page 5: Scotgrip Product Brochure

The leading edge of a step is the most dangerous part,

especially if it has been damaged, worn smooth or

rounded by constant use. By installing Scotgrip® Footsure

stair nosings not only is this slip hazard eliminated but

the lifespan of the step is greatly increased. These heavy

duty products are easily fitted onto open grating/grille,

chequered plate, concrete or wood.

Calluswithyourrequirements.Eliminate‘SlipsandTrips’onyourstairways.

• Eliminates‘SlipsandTrips’

• Costeffective

• Hightractionanti-slipsafetyproducts

• Toughanddurable

• Standardsizesandcustommade

• Fullyguaranteed

• Firerated,sparkandfrictiontested

• Noncorrosive

• Easytofitoverexistingsteps

• Reflectspositivelyonpersonnelperformance

Scotgrip®FootsurestairnosingsincorporatetheuniqueScotgrip®high-tractionanti-slipsafetysurfacewhichgivesasoundfoot-holdinginthemostextremeconditions.ThesetoughanddurableproductsaremanufacturedunderbSENiS09001:2008qualitycontrolledconditionscomprisingofareinforcedcompositebaseandagradedaggregatesurface.AsaScotgrip®

qualitystandard,theseproductsarefirerated,sparkandfrictiontested.

Providingsafetysolutionstoindustry

Ref: SCGR Footsure Issue No: 1

Issue Date: Mar 2010 Page No: 1 of 2

No. 10041261No. 23136

FQMFacilitators Quality Management

Stairways-FSNFootsure

Manufacturersofheavyduty,anti-slipsafetyproducts

Page 6: Scotgrip Product Brochure

HigH-TRACTioNANTi-SLiP

Scotgrip® Footsure stair nosings will provide a sound foot-holding even in the mostextreme conditions and will eliminate ‘Slips and Trips’ in your working environment.

Surface grades: High Profile – 6mm aggregate (1/4” approx.) Low Profile – 3mm aggregate (1/8” approx.) Fine Profile – 1mm aggregate (1/16” approx.)

HigHLyviSibLE

Colour coded in a wide range of colour schemes to suit individual locations.Colour codes are: safety yellow, black/safety yellow, black, green, grey, blue, red, white. fluorescent and photoluminescent finishes Other colours available – please ask.

HEAvydUTy

Scotgrip® Footsure stair nosings are extremely durable and remain highly effectivefor many years.

STANdARdSizESoRToCUSToMERSPECiFiCATioN

Scotgrip® Footsure stair nosings are manufactured in a wide range of standardsizes (see table opposite). We regularly manufacture custom sizes to suit individual locations.

EASEoFiNSTALLATioN

Scotgrip® Footsure stair nosings are designed for quick and secure fitting, either bymechanical fixings or bonding to existing surfaces. These products are pre-drilled where required for quick installation. Scotgrip® products are non-load bearing and must have a suitable underlying structure to be secured to.

QUALiTy–iT’SwHATdRivESUS

All Scotgrip® products are manufactured under BS EN ISO 9001:2008 qualitycontrolled conditions using highly compatible raw materials at our premisesin Banchory, UK.

FURTHERSCoTgRiP®PRodUCTS

If you would like to view the full Scotgrip® anti-slip safety product range that we manufacture, please look at our website: www.scotgrip.comwhere you will find all of our available products and details.

StepintoasaferenvironmentwithScotgrip®

© Copyright 2010. Scotgrip® is a registered trademark of Scotgrip (UK) LimitedScotgrip (UK) Limited may make changes to the design and manufacturing processes of Scotgrip®

anti-slip safety products as part of a continuous programme of improvement and innovation.

SCoTgRiP®oRdERiNg/ENQUiRyiNFoRMATioNWhen ordering Scotgrip® anti-slip safety products, please send us the following details:

Product Type:

Quantity:

Size:

Colour:

Surface grade:

If fixings are required, please advise which type of surface you are securing to: (e.g. open grating/grille, chequered plate, flat steel, concrete, wood):

Forfurtheradviceorinformationcontact:Scotgrip (UK) Limited, Silverbank Industrial Estate, North Deeside Road, Banchory, Kincardineshire AB31 5YR, UKTel: + 44 (0) 1330 825335 Fax: + 44 (0) 1330 825260

Scotgrip (UK) Limited, Westchase Center, 2500 City West Boulevard, Suite 300, Houston, Texas 77042, USATel: + 1 (713) 267 2243 Fax: + 1 (713) 267 2267

e-mail: [email protected] website: www.scotgrip.comRegistered in Edinburgh, Scotland No SC130388 VAT Reg. No. GB553 1222 78 D-U-N-S No 76-676-9954 (Dun & Bradstreet)

Stairways-FSNFootsure Ref: SCGR Footsure Issue No: 1 Issue Date: Mar 2010 Page No: 2 of 2

PRodUCTS Code

Scotgrip® anti-slip Footsure stair nosing FSN

FiTTiNgdATA

We recommend our own fastening systems for securing Scotgrip® products.

Custom sizes also available. Standard lip size on stair nosing is 30mm (1" approx.)

For installation details, please go to the Technical section of our website: www.scotgrip.com

STANdARdSizES

LENgTH

bREAdTH(dEPTH) 40 80 100 130 160 200 260

inches 11/2 3 4 5 6 8 10

450 18 ✔ ✔ ✔ ✔ ✔ ✔ ✔

600 24 ✔ ✔ ✔ ✔ ✔ ✔ ✔

750 30 ✔ ✔ ✔ ✔ ✔ ✔ ✔

900 36 ✔ ✔ ✔ ✔ ✔ ✔ ✔

1200 48 ✔ ✔ ✔ ✔ ✔ ✔ ✔

mm

FiXiNgHoLEPoSiTioN

If fixing holes are to be pre-drilled the following information is required:

Fittingonto: Method

Open grating/grille Type ‘S’ fixings (saddle assemblies)

Chequered plate Self tap screws or nut, bolt and washer

Concrete HPS impact fixingsWood screws or adhesive

Page 7: Scotgrip Product Brochure

The leading edge of a step is the most dangerous

part, especially if it has been damaged, worn smooth

or rounded by constant use. By installing Scotgrip®

Safegrip® stair nosings not only is this slip hazard

eliminated but the lifespan of the step is greatly

increased. These products are easily fitted onto open

grating/grille, chequered plate, concrete or wood.

Calluswithyourrequirements.Eliminate‘SlipsandTrips’onyourstairways.

• Eliminates‘SlipsandTrips’

• Costeffective

• Hightractionanti-slipsafetyproducts

• Toughanddurable

• Standardsizesandcustommade

• Fullyguaranteed

• Firerated,sparkandfrictiontested

• Noncorrosive

• Easytofitoverexistingsteps

• Reflectspositivelyonpersonnelperformance

Scotgrip®Safegrip®stairnosingsincorporatetheuniqueScotgrip®high-tractionanti-slipsafetysurfacewhichgivesasoundfoot-holding.ThesetoughanddurableproductsaremanufacturedunderbSENiS09001:2008qualitycontrolledconditionscomprisingofareinforcedcompositebaseandagradedaggregatesurface.AsaScotgrip®qualitystandard,theseproductsarefirerated,sparkandfrictiontested.

Providingsafetysolutionstoindustry

Ref: SCGR Safegrip Issue No: 1

Issue Date: Mar 2010 Page No: 1 of 2

No. 10041261No. 23136

FQMFacilitators Quality Management

Stairways-Safegrip®

Manufacturersofheavyduty,anti-slipsafetyproducts

Page 8: Scotgrip Product Brochure

HigH-TRACTioNANTi-SLiP

Scotgrip® Safegrip® stair nosings will provide a sound foot-holding and willeliminate ‘Slips and Trips’ in your working environment.

Surface grade: Fine Profile – 1mm aggregate (1/16” approx.)

HigHLyviSibLE

Colour coded in a wide range of colour schemes to suit individual locations.Colour codes are: safety yellow Other colours available – please ask.

STANdARdSizESoRToCUSToMERSPECiFiCATioN

Scotgrip® Safegrip® stair nosings are manufactured in a wide range of standardsizes (see table opposite). We regularly manufacture custom sizes to suitindividual locations.

EASEoFiNSTALLATioN

Scotgrip® Safegrip® stair nosings are designed for quick and secure fitting, either bymechanical fixings or bonding to existing surfaces. These products are pre-drilledwhere required for quick installation. Scotgrip® products are non-load bearing andmust have a suitable underlying structure to be secured to.

QUALiTy–iT’SwHATdRivESUS

All Scotgrip® products are manufactured under BS EN ISO 9001:2008 qualitycontrolled conditions using highly compatible raw materials at our premisesin Banchory, UK.

FURTHERSCoTgRiP®PRodUCTS

If you would like to view the full Scotgrip® anti-slip safety product range that we manufacture, please look at our website: www.scotgrip.comwhere you will find all of our available products and details.

StepintoasaferenvironmentwithScotgrip®

© Copyright 2010. Scotgrip® is a registered trademark of Scotgrip (UK) LimitedScotgrip (UK) Limited may make changes to the design and manufacturing processes of Scotgrip®

anti-slip safety products as part of a continuous programme of improvement and innovation.

SCoTgRiP®oRdERiNg/ENQUiRyiNFoRMATioNWhen ordering Scotgrip® anti-slip safety products, please send us the following details:

Product Type:

Quantity:

Size:

Colour:

Surface grade:

If fixings are required, please advise which type of surface you are securing to: (e.g. open grating/grille, chequered plate, flat steel, concrete, wood):

Forfurtheradviceorinformationcontact:Scotgrip (UK) Limited, Silverbank Industrial Estate, North Deeside Road, Banchory, Kincardineshire AB31 5YR, UKTel: + 44 (0) 1330 825335 Fax: + 44 (0) 1330 825260

Scotgrip (UK) Limited, Westchase Center, 2500 City West Boulevard, Suite 300, Houston, Texas 77042, USATel: + 1 (713) 267 2243 Fax: + 1 (713) 267 2267

e-mail: [email protected] website: www.scotgrip.comRegistered in Edinburgh, Scotland No SC130388 VAT Reg. No. GB553 1222 78 D-U-N-S No 76-676-9954 (Dun & Bradstreet)

Stairways-Safegrip® Ref: SCGR Safegrip Issue No: 1 Issue Date: Mar 2010 Page No: 2 of 2

PRodUCT Code

Scotgrip® Safegrip® anti-slip stair nosing GSN

FiTTiNgdATA

FiXiNgHoLEPoSiTioN

If fixing holes are to be pre-drilled the following information is required:

We recommend our own fastening systems for securing Scotgrip® products.

STANdARdSizES

Custom sizes also available. Standard lip size on stair nosing is 30mm (1" approx.)

For installation details, please go to the Technical section of our website: www.scotgrip.com

40 80 100 130 160 200 260

inches 11/2 3 4 5 6 8 10

450 18 ✔ ✔ ✔ ✔ ✔ ✔ ✔

600 24 ✔ ✔ ✔ ✔ ✔ ✔ ✔

750 30 ✔ ✔ ✔ ✔ ✔ ✔ ✔

900 36 ✔ ✔ ✔ ✔ ✔ ✔ ✔

1200 48 ✔ ✔ ✔ ✔ ✔ ✔ ✔

LEN

gTH

bREAdTH (dEPTH)

Fittingonto: Method

Open grating/grille Type ‘S’ fixings (saddle assemblies)

Chequered plate Self tap screws or nut, bolt and washer

Concrete HPS impact fixingsWood screws or adhesive

mm

Page 9: Scotgrip Product Brochure

The leading edge of a step is the most dangerous part,

especially if it has been damaged, worn smooth or

rounded by constant use. The rear edge of a step can

also be a concern if objects can be dropped or kicked

over accidentally and fall below. By installing Scotgrip®

Kicker Tread® not only is this slip hazard and objects

dropping from a height eliminated but the lifespan of the

step is greatly increased.

These heavy duty products are easily fitted onto open

grating/grille, chequered plate, concrete or wood.

Calluswithyourrequirements.Eliminate‘SlipsandTrips’and‘objectsdroppingfromaheight’onyourstairways.

• Eliminates‘SlipsandTrips’

• Eliminates‘objectsdroppingfromaheight’

• Costeffective

• Hightractionanti-slipsafetyproducts

• Toughanddurable

• Manufacturedtocustomerspecification

• Fullyguaranteed

• Firerated,sparkandfrictiontested

• Noncorrosive

• Easytofitoverexistingsteps

• Reflectspositivelyonpersonnelperformance

Scotgrip®KickerTread®incorporatetheuniqueScotgrip®high-tractionanti-slipsafetysurfacewhichgivesasoundfoot-holdinginthemostextremeconditions.ThesetoughanddurableproductsaremanufacturedunderbSENiS09001:2008qualitycontrolledconditionscomprisingofareinforcedcompositebaseandagradedaggregatesurface.AsaScotgrip®qualitystandard,theseproductsarefirerated,sparkandfrictiontested.Scotgrip®KickerTread®hastheaddedfeatureofasafety‘Kicker’incorporatedattherearofthetread.

Providingsafetysolutionstoindustry

Ref: SCGR KTS Issue No: 1

Issue Date: Mar 2010 Page No: 1 of 2

No. 10041261No. 23136

FQMFacilitators Quality Management

Stairways-KTSKickerTread®

Manufacturersofheavyduty,anti-slipsafetyproducts

Page 10: Scotgrip Product Brochure

HigH-TRACTioNANTi-SLiP

Scotgrip® Kicker Tread® will provide a sound foot-holding even in the most extreme conditions and will eliminate ‘Slips and Trips’ and ‘Objects dropping from a height’ in your working environment.

Surface grades: High Profile – 6mm aggregate (1/4” approx.) Low Profile – 3mm aggregate (1/8” approx.) Fine Profile – 1mm aggregate (1/16” approx.)

HigHLyviSibLE

Colour coded in a wide range of colour schemes to suit individual locations.Colour codes are: safety yellow, black/safety yellow, black, green, grey, blue, red, white. fluorescent and photoluminescent finishes Other colours available – please ask.

HEAvydUTy

Scotgrip® Kicker Tread® is extremely durable and remain highly effectivefor many years.

MANUFACTUREdToCUSToMERSPECiFiCATioN

Scotgrip® Kicker Tread® is supplied to your requirements as the tread needsto be fairly snug with the stairway stringers.

SAFETy‘KiCKER’

A safety ‘Kicker’ is incorporated at the rear of the Kicker Tread® to prevent objectsbeing dropped or kicked over the back of it and fall below. We recommend this upstand ‘Kicker’ to be at least 100mm (4” approx) in height. We can increase or decrease this height to suit your requirements.

EASEoFiNSTALLATioN

Scotgrip® Kicker Tread® is designed for quick and secure fitting, either bymechanical fixings or bonding to existing surfaces. These products arepre-drilled where required for quick installation. Scotgrip® products are non-loadbearing and must have a suitable underlying structure to be secured to.

QUALiTy–iT’SwHATdRivESUS

All Scotgrip® products are manufactured under BS EN ISO 9001:2008 qualitycontrolled conditions using highly compatible raw materials at our premisesin Banchory, UK.

FURTHERSCoTgRiP®PRodUCTS

If you would like to view the full Scotgrip® anti-slip safety product range that we manufacture, please look at our website: www.scotgrip.comwhere you will find all of our available products and details.

StepintoasaferenvironmentwithScotgrip®

© Copyright 2010. Scotgrip® is a registered trademark of Scotgrip (UK) LimitedScotgrip (UK) Limited may make changes to the design and manufacturing processes of Scotgrip®

anti-slip safety products as part of a continuous programme of improvement and innovation.

SCoTgRiP®oRdERiNg/ENQUiRyiNFoRMATioNWhen ordering Scotgrip® anti-slip safety products, please send us the following details:

Product Type:

Quantity:

Size:

Colour:

Surface grade:

If fixings are required, please advise which type of surface you are securing to: (e.g. open grating/grille, chequered plate, flat steel, concrete, wood):

For installation details, please go to the Technical section of our website: www.scotgrip.com

Forfurtheradviceorinformationcontact:Scotgrip (UK) Limited, Silverbank Industrial Estate, North Deeside Road, Banchory, Kincardineshire AB31 5YR, UKTel: + 44 (0) 1330 825335 Fax: + 44 (0) 1330 825260

Scotgrip (UK) Limited, Westchase Center, 2500 City West Boulevard, Suite 300, Houston, Texas 77042, USATel: + 1 (713) 267 2243 Fax: + 1 (713) 267 2267

e-mail: [email protected] website: www.scotgrip.comRegistered in Edinburgh, Scotland No SC130388 VAT Reg. No. GB553 1222 78 D-U-N-S No 76-676-9954 (Dun & Bradstreet)

Stairways-KTSKickerTread® Ref: SCGR KTS Issue No: 1 Issue Date: Mar 2010 Page No: 2 of 2

• Manufacturedtocustomerspecification Scotgrip® Kicker Tread® is supplied to your requirements as the tread needs to be fairly snug with the stairway stringers.

PRodUCT CodeScotgrip® anti-slip Kicker Tread® KTS

FiTTiNgdATA

STANdARdSizES

FiXiNgHoLEPoSiTioN

If fixing holes are to be pre-drilled the following information is required:

breadth(ordepth)ofStepLength*

UP TO 200mm (8” approx)UP TO 250mm (10” approx)UP TO 300mm (12” approx)

SUPPLIEDTO THE EXACT

LENGTH OFYOUR STEPS

*Please deduct 10mm (3/8” approx) from length of steps to allow for proper seating.

Kicker Tread® (underside)Kicker Tread®

• Easeofinstallation Scotgrip® Kicker Tread® is designed for quick and secure

fitting on your location. Our products are pre-drilled to aid installation.

Fittingonto: Method

Open grating Type ‘S’ fixings (saddle assemblies)

Chequered plate Self tap screws or nut, bolt and washer

Wood screws or adhesive

Page 11: Scotgrip Product Brochure

We feel that it would defeat the purpose to have

‘SignAlert’ on every step as there would be too many

messages, therefore we would recommend ‘SignAlert’ to

be placed at the first and last steps, possibly the middle

step depending on the stairway size. ‘SignAlert’ can

be of any description and can incorporate the clients

company logo to create a more positive impact with

regards to the safety messages given.

All Scotgrip® products with the ‘SignAlert’ safety marking

system incorporate the unique Scotgrip® high-traction

anti-slip safety surface which gives a sound foot-holding

in the most extreme conditions. These tough and durable

products are manufactured under BS EN IS0 9001:2008

quality controlled conditions comprising of a reinforced

composite base and a graded aggregate surface. As a

Scotgrip® quality standard, these products are fire rated,

spark and friction tested.

Calluswithyourrequirements.Eliminate‘SlipsandTrips’andenhancesafetyonyourlocation.

• Eliminates‘SlipsandTrips’

• Promotesafetymessages/information

• Costeffective

• Hightractionanti-slipsafetyproducts

• Toughanddurable

• Standardsizesandcustommade

• Fullyguaranteed

• Firerated,sparkandfrictiontested

• Noncorrosive

• Easytofitoverexistingsurfaces

• Reflectspositivelyonpersonnelperformance

TheScotgrip®‘SignAlert’safetymarkingsystemisproventobeaneffectivemethodofwarningpersonnelofanyhazards/hazardousareaswhichtheymaybeexposedtoandalsoasaremindertothinkofsafetyatalltimes.The‘SignAlert’systemcanbeaddedtovirtuallyallScotgrip®anti-slipsafetyproducts–themostpopularbeingstairnosings/treads,KickerTreads®andtiles.

Providingsafetysolutionstoindustry

Ref: SCGR SignAlert Issue No: 1

Issue Date: Mar 2010 Page No: 1 of 2

No. 10041261No. 23136

FQMFacilitators Quality Management

SignAlertSafetyMarkingSystem

Manufacturersofheavyduty,anti-slipsafetyproducts

Page 12: Scotgrip Product Brochure

HigH-TRACTioNANTi-SLiP

Scotgrip® ‘SignAlert’ safety products will provide a sound footholding even in the most extreme conditions and will eliminate ‘Slips and Trips’ in your working environment. Please note: the product and message size will determine the surface grade available.

Surface grades: High Profile – 6mm aggregate (1/4” approx.) Low Profile – 3mm aggregate (1/8” approx.) Fine Profile – 1mm aggregate (1/16” approx.)

HigHLyviSibLE

Colour coded in a wide range of colour schemes to suit individual locations.Colour codes are: blue/white, red/white, safety yellow, Fluorescent and photoluminescent finishes Other colours available – please ask.

HEAvydUTy

Scotgrip® ‘SignAlert’ safety products are extremely durable and remain highly effective for many years.

STANdARdSizESoRToCUSToMERSPECiFiCATioN

Scotgrip® ‘SignAlert’ safety products are manufactured in standard sizes (see table opposite). We regularly manufacture custom sizes to suit individual locations.

SAFETyMESSAgES/iNFoRMATioN

‘SignAlert’ can be of any description to promote safety messages/information and can incorporate the client’s company logo to create a more positive impact with regards to the safety messages given.

EASEoFiNSTALLATioN

Scotgrip® ‘SignAlert’ safety products are designed for quick and secure fitting, either by mechanical fixings or bonding to existing surfaces. These products are pre-drilled where required for quick installation. Scotgrip® products are non-load bearing and must have a suitable underlying structure to be secured to.

QUALiTy–iT’SwHATdRivESUS

All Scotgrip® products are manufactured under BS EN ISO 9001:2008 qualitycontrolled conditions using highly compatible raw materials at our premisesin Banchory, UK.

FURTHERSCoTgRiP®PRodUCTS

If you would like to view the full Scotgrip® anti-slip safety product range that we manufacture, please look at our website: www.scotgrip.comwhere you will find all of our available products and details.

StepintoasaferenvironmentwithScotgrip®

© Copyright 2010. Scotgrip® is a registered trademark of Scotgrip (UK) LimitedScotgrip (UK) Limited may make changes to the design and manufacturing processes of Scotgrip®

anti-slip safety products as part of a continuous programme of improvement and innovation.

SCoTgRiP®oRdERiNg/ENQUiRyiNFoRMATioNWhen ordering Scotgrip® anti-slip safety products, please send us the following details:

Product Type:

Quantity:

Size:

Colour:

Surface grade:

Message:

If fixings are required, please advise which type of surface you are securing to: (e.g. open grating/grille, chequered plate, flat steel, concrete, wood):For installation details, please go to the Technical section of

our website: www.scotgrip.com

Forfurtheradviceorinformationcontact:Scotgrip (UK) Limited, Silverbank Industrial Estate, North Deeside Road, Banchory, Kincardineshire AB31 5YR, UKTel: + 44 (0) 1330 825335 Fax: + 44 (0) 1330 825260

Scotgrip (UK) Limited, Westchase Center, 2500 City West Boulevard, Suite 300, Houston, Texas 77042, USATel: + 1 (713) 267 2243 Fax: + 1 (713) 267 2267

e-mail: [email protected] website: www.scotgrip.comRegistered in Edinburgh, Scotland No SC130388 VAT Reg. No. GB553 1222 78 D-U-N-S No 76-676-9954 (Dun & Bradstreet)

SignAlertSafetyMarkingSystem Ref: SCGR SignAlert Issue No: 1 Issue Date: Mar 2010 Page No: 2 of 2

For installation details, please go to the Technical section of our website: www.scotgrip.com

FiTTiNgdATA

FiXiNgHoLEPoSiTioN

If fixing holes are to be pre-drilled the following information is required:

We recommend our own fastening systems for securing Scotgrip® products.

STANdARdSizES

Custom sizes also available. Standard lip size on stair nosings is 30mm (1” approx).

LEN

gTH

bREAdTH (dEPTH)

mm 200 260

inches 8 10

700 28 ✔ ✔

900 36 ✔ ✔

1200 48 ✔ ✔

Scotgrip® Kicker Tread®

with ‘SignAlert’ message ‘Use Handrail’

Fittingonto: Method

Open grating/grille Type ‘S’ fixings (saddle assemblies)

Chequered plate Self tap screws or nut, bolt and washer

Concrete HPS impact fixingsWood screws or adhesive

We would recommend the following as a guideline for each stairway:

1 x tread for top step (USETRAiLiNgHANdTECHNiQUE)

1 x tread for bottom step (USEHANdRAiL)

Page 13: Scotgrip Product Brochure

Open grating/grille flooring is quite acceptable when

dry but can become extremely dangerous when wet,

soiled or painted. By installing Scotgrip® Grating Cover

Tiles, not only is this slip hazard eliminated but the

lifespan of the underlying open grating/grille is greatly

increased. These heavy duty products are secured

to open grating/grille with Scotgrip Type ‘S’ fixings

(saddle assemblies) comprising of an adjustable u-

clamp, nyloc nut and washer.

Calluswithyourrequirements.Eliminate‘SlipsandTrips’onyourwalkways/decks.

• Eliminates‘SlipsandTrips’

• Costeffective

• Hightractionanti-slipsafetyproducts

• Toughanddurable

• Standardsizesandcustommade

• Fullyguaranteed

• Firerated,sparkandfrictiontested

• Noncorrosive

• Easytofitoverexistingopengrating/grille

• Reflectspositivelyonpersonnelperformance

Scotgrip®gratingCoverTilesincorporatetheuniqueScotgrip®high-tractionanti-slipsafetysurfacewhichgivesasoundfoot-holdinginthemostextremeconditions.ThesetoughanddurableproductsaremanufacturedunderbSENiS09001:2008qualitycontrolledconditionscomprisingofareinforcedcompositebaseandagradedaggregatesurface.AsaScotgrip®

qualitystandard,theseproductsarefirerated,sparkandfrictiontested.

Providingsafetysolutionstoindustry

Ref: SCGR SGCT Issue No: 1

Issue Date: Mar 2010 Page No: 1 of 2

No. 10041261No. 23136

FQMFacilitators Quality Management

walkways/decks-SgCTgratingCoverTile

Manufacturersofheavyduty,anti-slipsafetyproducts

Page 14: Scotgrip Product Brochure

HigH-TRACTioNANTi-SLiP

Scotgrip® Grating Cover Tiles will provide a sound foot-holding even in the mostextreme conditions and will eliminate ‘Slips and Trips’ in your working environment.

Surface grades: High Profile – 6mm aggregate (1/4” approx.) Low Profile – 3mm aggregate (1/8” approx.) Fine Profile – 1mm aggregate (1/16” approx.)

HigHLyviSibLE

Colour coded in a wide range of colour schemes to suit individual locations.Colour codes are: safety yellow, black/safety yellow, black, green, grey, blue, red, white. fluorescent and photoluminescent finishes Other colours available – please ask.

HEAvydUTy

Scotgrip® Grating Cover Tiles are extremely durable and remain highly effectivefor many years.

STANdARdSizESoRToCUSToMERSPECiFiCATioN

Scotgrip® Grating Cover Tiles are manufactured in a wide range of standardsizes (see table opposite). We regularly manufacture custom sizes to suitindividual locations.

EASEoFiNSTALLATioN

Scotgrip® Grating Cover Tiles are designed for quick and secure fitting onto opengrating/grille using Scotgrip® Type ‘S’ fixings (saddle assemblies). These productsare pre-drilled where required for quick installation. Scotgrip® products arenon-load bearing and must have a suitable underlying structure to be secured to.

QUALiTy–iT’SwHATdRivESUS

All Scotgrip® products are manufactured under BS EN ISO 9001:2008 qualitycontrolled conditions using highly compatible raw materials at our premisesin Banchory, UK.

FURTHERSCoTgRiP®PRodUCTS

If you would like to view the full Scotgrip® anti-slip safety product range that we manufacture, please look at our website: www.scotgrip.comwhere you will find all of our available products and details.

StepintoasaferenvironmentwithScotgrip®

© Copyright 2010. Scotgrip® is a registered trademark of Scotgrip (UK) LimitedScotgrip (UK) Limited may make changes to the design and manufacturing processes of Scotgrip®

anti-slip safety products as part of a continuous programme of improvement and innovation.

SCoTgRiP®oRdERiNg/ENQUiRyiNFoRMATioNWhen ordering Scotgrip® anti-slip safety products, please send us the following details:

Product Type:

Quantity:

Size:

Colour:

Surface grade:

Forfurtheradviceorinformationcontact:Scotgrip (UK) Limited, Silverbank Industrial Estate, North Deeside Road, Banchory, Kincardineshire AB31 5YR, UKTel: + 44 (0) 1330 825335 Fax: + 44 (0) 1330 825260

Scotgrip (UK) Limited, Westchase Center, 2500 City West Boulevard, Suite 300, Houston, Texas 77042, USATel: + 1 (713) 267 2243 Fax: + 1 (713) 267 2267

e-mail: [email protected] website: www.scotgrip.comRegistered in Edinburgh, Scotland No SC130388 VAT Reg. No. GB553 1222 78 D-U-N-S No 76-676-9954 (Dun & Bradstreet)

walkways/decks-SgCTgratingCoverTile Ref: SCGR SGCT Issue No: 1 Issue Date: Mar 2010 Page No: 2 of 2

PRodUCT Code

Scotgrip® Anti-Slip Grating Cover Tile SGCT

FiTTiNgdATA

STANdARdSizES

Custom sizes also available.

For installation details, please go to the Technical section of our website: www.scotgrip.com

mm mm 500 600 700 800 900 1000 1200

inches 20 24 28 32 36 40 48

500 20 ✔ ✔ ✔ ✔ ✔ ✔ ✔

1000 40 ✔ ✔ ✔ ✔ ✔ ✔ ✔

1500 59 ✔ ✔ ✔ ✔ ✔ ✔ ✔

2000 79 ✔ ✔ ✔ ✔ ✔ ✔ ✔

2500 98 ✔ ✔ ✔ ✔ ✔ ✔ ✔

LEN

gTH

bREAdTH

SgCT

Fittingonto: Method

Open grating/grille Type ‘S’ fixings (saddle assemblies)

Page 15: Scotgrip Product Brochure

Walkways/decks/flooring can be made from various

materials including the following: flat steel, aluminium,

concrete or wood. Most of these materials are quite

acceptable when dry but can become extremely

dangerous when wet, soiled or painted.

By installing Scotgrip® Deck Tiles not only is this slip

hazard eliminated but the lifespan of the underlying

material is greatly increased. These heavy duty products

are secured either by mechanical fixings or bonded to

existing surfaces.

Calluswithyourrequirements.Eliminate‘SlipsandTrips’onyourwalkways/decks.

• Eliminates‘SlipsandTrips’

• Costeffective

• Hightractionanti-slipsafetyproducts

• Toughanddurable

• Standardsizesandcustommade

• Fullyguaranteed

• Firerated,sparkandfrictiontested

• Noncorrosive

• Easytofitoverexistingwalkways/decks

• Reflectspositivelyonpersonnelperformance

Scotgrip®deckTilesincorporatetheuniqueScotgrip®high-tractionanti-slipsafetysurfacewhichgivesasoundfoot-holdinginthemostextremeconditions.ThesetoughanddurableproductsaremanufacturedunderbSENiS09001:2008qualitycontrolledconditionscomprisingofareinforcedcompositebaseandagradedaggregatesurface.AsaScotgrip®

qualitystandard,theseproductsarefirerated,sparkandfrictiontested.

Providingsafetysolutionstoindustry

Ref: SCGR SDT Issue No: 1

Issue Date: Mar 2010 Page No: 1 of 2

No. 10041261No. 23136

FQMFacilitators Quality Management

walkways/decks-SdTdeckTile

Manufacturersofheavyduty,anti-slipsafetyproducts

Page 16: Scotgrip Product Brochure

HigH-TRACTioNANTi-SLiP

Scotgrip® Deck Tiles will provide a sound foot-holding even in the mostextreme conditions and will eliminate ‘Slips and Trips’ in your working environment.

Surface grades: High Profile – 6mm aggregate (1/4” approx.) Low Profile – 3mm aggregate (1/8” approx.) Fine Profile – 1mm aggregate (1/16” approx.)

HigHLyviSibLE

Colour coded in a wide range of colour schemes to suit individual locations.Colour codes are: safety yellow, black/safety yellow, black, green, grey, blue, red, white. fluorescent and photoluminescent finishes Other colours available – please ask.

HEAvydUTy

Scotgrip® Deck Tiles are extremely durable and remain highly effective for many years.

STANdARdSizESoRToCUSToMERSPECiFiCATioN

Scotgrip® Deck Tiles are manufactured in a wide range of standard sizes (see table opposite). We regularly manufacture custom sizes to suit individual locations.

EASEoFiNSTALLATioN

Scotgrip® Deck Tiles are designed for quick and secure fitting either by mechanicalfixings or bonding to existing surfaces. These products are pre-drilled where required for quick installation. Scotgrip® products are non-load bearing and must have a suitable underlying structure to be secured to.

QUALiTy–iT’SwHATdRivESUS

All Scotgrip® products are manufactured under BS EN ISO 9001:2008 qualitycontrolled conditions using highly compatible raw materials at our premisesin Banchory, UK.

FURTHERSCoTgRiP®PRodUCTS

If you would like to view the full Scotgrip® anti-slip safety product range that we manufacture, please look at our website: www.scotgrip.comwhere you will find all of our available products and details.

StepintoasaferenvironmentwithScotgrip®

© Copyright 2010. Scotgrip® is a registered trademark of Scotgrip (UK) LimitedScotgrip (UK) Limited may make changes to the design and manufacturing processes of Scotgrip®

anti-slip safety products as part of a continuous programme of improvement and innovation.

SCoTgRiP®oRdERiNg/ENQUiRyiNFoRMATioNWhen ordering Scotgrip® anti-slip safety products, please send us the following details:

Product Type:

Quantity:

Size:

Colour:

Surface grade:

If fixings or adhesive are required, please advise which type of surface you are securing to: (e.g. flat steel, aluminium, concrete, wood):

Forfurtheradviceorinformationcontact:Scotgrip (UK) Limited, Silverbank Industrial Estate, North Deeside Road, Banchory, Kincardineshire AB31 5YR, UKTel: + 44 (0) 1330 825335 Fax: + 44 (0) 1330 825260

Scotgrip (UK) Limited, Westchase Center, 2500 City West Boulevard, Suite 300, Houston, Texas 77042, USATel: + 1 (713) 267 2243 Fax: + 1 (713) 267 2267

e-mail: [email protected] website: www.scotgrip.comRegistered in Edinburgh, Scotland No SC130388 VAT Reg. No. GB553 1222 78 D-U-N-S No 76-676-9954 (Dun & Bradstreet)

walkways/decks-SdTdeckTile Ref: SCGR SDT Issue No: 1 Issue Date: Mar 2010 Page No: 2 of 2

PRodUCT Code

Scotgrip® Anti-Slip Deck Tile SDT

FiTTiNgdATA

We recommend our own fastening systems and adhesives for securing Scotgrip® products.

STANdARdSizES

Custom sizes also available.

For installation details, please go to the Technical section of our website: www.scotgrip.com

mm mm 500 600 700 800 900 1000 1200

inches 20 24 28 32 36 40 48

500 20 ✔ ✔ ✔ ✔ ✔ ✔ ✔

1000 40 ✔ ✔ ✔ ✔ ✔ ✔ ✔

1500 59 ✔ ✔ ✔ ✔ ✔ ✔ ✔

2000 79 ✔ ✔ ✔ ✔ ✔ ✔ ✔

2500 98 ✔ ✔ ✔ ✔ ✔ ✔ ✔

LEN

gTH

bREAdTH

SdT

Fittingonto: Method

Metal Deck Self tap screws or nut, bolt and washer, or adhesive

Concrete HPS impact fixingsWood Screws or adhesive

Page 17: Scotgrip Product Brochure

Steel decks are quite acceptable when dry but can

become extremely dangerous when wet, soiled or

painted. By installing Scotgrip® Weld Deck Tiles not

only is this slip hazard eliminated but the lifespan of

the underlying steel deck is greatly increased.

These heavy duty products are secured as the name

suggests – by welding. This unique safety product

is manufactured with built in protruding steel plates

around the perimeter of the tile. These plates are

positioned in such a way that if more than one tile

is fitted they can be butted up together by means of

interlocking the protruding steel plates.

Calluswithyourrequirements.Eliminate‘SlipsandTrips’onyourwalkways/decks.

• Eliminates‘SlipsandTrips’

• Costeffective

• Hightractionanti-slipsafetyproducts

• Toughanddurable

• Standardsizesandcustommade

• Fullyguaranteed

• Firerated,sparkandfrictiontested

• Noncorrosive

• Easytofitoverexistingwalkways/decks

• Reflectspositivelyonpersonnelperformance

Scotgrip®welddeckTilesincorporatetheuniqueScotgrip®high-tractionanti-slipsafetysurfacewhichgivesasoundfoot-holdinginthemostextremeconditions.ThesetoughanddurableproductsaremanufacturedunderbSENiS09001:2008qualitycontrolledconditionscomprisingofareinforcedcompositebaseandagradedaggregatesurface.AsaScotgrip®

qualitystandard,theseproductsarefirerated,sparkandfrictiontested.

Providingsafetysolutionstoindustry

Ref: SCGR SWDT Issue No: 1

Issue Date: Mar 2010 Page No: 1 of 2

No. 10041261No. 23136

FQMFacilitators Quality Management

walkways/decks-SwdTwelddeckTile

Manufacturersofheavyduty,anti-slipsafetyproducts

Page 18: Scotgrip Product Brochure

HigH-TRACTioNANTi-SLiP

Scotgrip® Weld Deck Tiles will provide a sound foot-holding even in the mostextreme conditions and will eliminate ‘Slips and Trips’ in your working environment.

Surface grades: High Profile – 6mm aggregate (1/4” approx.) Low Profile – 3mm aggregate (1/8” approx.) Fine Profile – 1mm aggregate (1/16” approx.)

HigHLyviSibLE

Colour coded in a wide range of colour schemes to suit individual locations.Colour codes are: safety yellow, black/safety yellow, black, green, grey, blue, red, white. fluorescent and photoluminescent finishes Other colours available – please ask.

HEAvydUTy

Scotgrip® Weld Deck Tiles are extremely durable and remain highly effectivefor many years.

STANdARdSizESoRToCUSToMERSPECiFiCATioN

Scotgrip® Weld Deck Tiles are manufactured in a wide range of standardsizes (see table opposite). We regularly manufacture custom sizes to suit individual locations.

EASEoFiNSTALLATioN

Scotgrip® Weld Deck Tiles are designed for quick and secure fitting by weldingthe protruding steel plates onto the steel deck. Scotgrip® products are non-loadbearing and must have a suitable underlying structure to be secured to.

QUALiTy–iT’SwHATdRivESUS

All Scotgrip® products are manufactured under BS EN ISO 9001:2008 qualitycontrolled conditions using highly compatible raw materials at our premisesin Banchory, UK.

FURTHERSCoTgRiP®PRodUCTS

If you would like to view the full Scotgrip® anti-slip safety product range that we manufacture, please look at our website: www.scotgrip.comwhere you will find all of our available products and details.

StepintoasaferenvironmentwithScotgrip®

© Copyright 2010. Scotgrip® is a registered trademark of Scotgrip (UK) LimitedScotgrip (UK) Limited may make changes to the design and manufacturing processes of Scotgrip®

anti-slip safety products as part of a continuous programme of improvement and innovation.

SCoTgRiP®oRdERiNg/ENQUiRyiNFoRMATioNWhen ordering Scotgrip® anti-slip safety products, please send us the following details:

Product Type:

Quantity:

Size:

Colour:

Surface grade:

Forfurtheradviceorinformationcontact:Scotgrip (UK) Limited, Silverbank Industrial Estate, North Deeside Road, Banchory, Kincardineshire AB31 5YR, UKTel: + 44 (0) 1330 825335 Fax: + 44 (0) 1330 825260

Scotgrip (UK) Limited, Westchase Center, 2500 City West Boulevard, Suite 300, Houston, Texas 77042, USATel: + 1 (713) 267 2243 Fax: + 1 (713) 267 2267

e-mail: [email protected] website: www.scotgrip.comRegistered in Edinburgh, Scotland No SC130388 VAT Reg. No. GB553 1222 78 D-U-N-S No 76-676-9954 (Dun & Bradstreet)

walkways/decks-SwdTwelddeckTile Ref: SCGR SWDT Issue No: 1 Issue Date: Mar 2010 Page No: 2 of 2

PRodUCT Code

Scotgrip® Anti-Slip Weld Deck Tile SWDT

FiTTiNgdATA

STANdARdSizES

Custom sizes also available.

For installation details, please go to the Technical section of our website: www.scotgrip.com

Weld plates are staggered to achieve close joint between tiles.

SwdT

Fittingonto: Method

Metal Deck By welding the protruding weld deck plates

mm mm 500 600 700 800 900 1000 1200

inches 20 24 28 32 36 40 48

500 20 ✔ ✔ ✔ ✔ ✔ ✔ ✔

1000 40 ✔ ✔ ✔ ✔ ✔ ✔ ✔

1500 59 ✔ ✔ ✔ ✔ ✔ ✔ ✔

2000 79 ✔ ✔ ✔ ✔ ✔ ✔ ✔

2500 98 ✔ ✔ ✔ ✔ ✔ ✔ ✔

LEN

gTH

bREAdTH

Page 19: Scotgrip Product Brochure

Drill Floors are quite acceptable when dry but can

become extremely dangerous when wet, soiled or

painted. By installing Scotgrip® Drillmate® Tiles not only

is this slip hazard eliminated but the lifespan of the

underlying structure is greatly increased.

These heavy duty products are secured by mechanical

fixings or by welding. This unique safety product can

be manufactured with built in protruding steel plates

around the perimeter of the tile. These plates are

positioned in such a way that if more than one tile is

fitted they can be butted up together by means of

interlocking the protruding steel plates.

Calluswithyourrequirements.Eliminate‘SlipsandTrips’onyourdrillfloor.

• Eliminates‘SlipsandTrips’

• Costeffective

• Hightractionanti-slipsafetyproducts

• Toughanddurable

• Standardsizesandcustommade

• Fullyguaranteed

• Firerated,sparkandfrictiontested

• Noncorrosive

• Easytofitoverexistingdrillfloors

• Reflectspositivelyonpersonnelperformance

Scotgrip®drillmate®TilesincorporatetheuniqueScotgrip®high-tractionanti-slipsafetysurfacewhichgivesasoundfoot-holdinginthemostextremeconditionsandareproventowithstandtheheavyrigoursregularlyfoundinadrillingenvironment.ThesetoughanddurableproductsaremanufacturedunderbSENiS09001:2008qualitycontrolledconditionscomprisingofareinforcedcompositebaseandagradedaggregatesurface.AsaScotgrip®qualitystandard,theseproductsarefirerated,sparkandfrictiontested.

Providingsafetysolutionstoindustry

Ref: SCGR Drillmate Issue No: 1

Issue Date: Mar 2010 Page No: 1 of 2

No. 10041261No. 23136

FQMFacilitators Quality Management

drillFloorTile-SdMdrillmate®

Manufacturersofheavyduty,anti-slipsafetyproducts

Page 20: Scotgrip Product Brochure

HigH-TRACTioNANTi-SLiP

Scotgrip® Drillmate® Tiles will provide a sound foot-holding even in the mostextreme conditions and will eliminate ‘Slips and Trips’ in your working environment.

Surface grades: High Profile – 6mm aggregate (1/4” approx.)

HigHLyviSibLE

Colour coded in a wide range of colour schemes to suit individual locations.Colour codes are: safety yellow, black/safety yellow, black, green, grey, blue, red, white. fluorescent and photoluminescent finishes Other colours available – please ask.

HEAvydUTy

Scotgrip® Drillmate® Tiles are extremely durable and remain highly effectivefor many years.

STANdARdSizESoRToCUSToMERSPECiFiCATioN

Scotgrip® Drillmate® Tiles can be supplied in the following sizes and adjusted tosuit on site:

1.0m x 1.0m (40” x 40”)2.5m x 1.0m (98” x 40”)

For custom manufacture please send a sketch to us with all dimensions andcut-out positions required of your drill floor arrangement.

EASEoFiNSTALLATioN

Scotgrip® Drillmate® Tiles can be secured to chequered plate, flat steel, opengrating/grille or wood by mechanical fixings. Another option is to add protrudingsteel plates during manufacture. These can be quickly and securely fitted by weldingthe protruding steel plates onto the steel deck. Scotgrip® products are non-loadbearing and must have a suitable underlying structure to be secured to.

QUALiTy–iT’SwHATdRivESUS

All Scotgrip® products are manufactured under BS EN ISO 9001:2008 qualitycontrolled conditions using highly compatible raw materials at our premisesin Banchory, UK.

FURTHERSCoTgRiP®PRodUCTS

If you would like to view the full Scotgrip® anti-slip safety product range that we manufacture, please look at our website: www.scotgrip.comwhere you will find all of our available products and details.

StepintoasaferenvironmentwithScotgrip®

© Copyright 2010. Scotgrip® is a registered trademark of Scotgrip (UK) LimitedScotgrip (UK) Limited may make changes to the design and manufacturing processes of Scotgrip®

anti-slip safety products as part of a continuous programme of improvement and innovation.

SCoTgRiP®oRdERiNg/ENQUiRyiNFoRMATioNWhen ordering Scotgrip® anti-slip safety products, please send us the following details:

Product Type:

Quantity:

Size:

Colour:

Please remember to send dimensions and cut-out positions required.

For installation details, please go to the Technical section of our website: www.scotgrip.com

Forfurtheradviceorinformationcontact:Scotgrip (UK) Limited, Silverbank Industrial Estate, North Deeside Road, Banchory, Kincardineshire AB31 5YR, UKTel: + 44 (0) 1330 825335 Fax: + 44 (0) 1330 825260

Scotgrip (UK) Limited, Westchase Center, 2500 City West Boulevard, Suite 300, Houston, Texas 77042, USATel: + 1 (713) 267 2243 Fax: + 1 (713) 267 2267

e-mail: [email protected] website: www.scotgrip.comRegistered in Edinburgh, Scotland No SC130388 VAT Reg. No. GB553 1222 78 D-U-N-S No 76-676-9954 (Dun & Bradstreet)

drillFloorTile-SdMdrillmate® Ref: SCGR Drillmate Issue No: 1 Issue Date: Mar 2010 Page No: 2 of 2

PRodUCTS Code

Scotgrip® Drillmate® Drill Floor Tile SDM

FiTTiNgdATA

wELdPLATEoPTioN

Weld plates are staggered to achieve close joint between tiles.

SdM Weld plates are staggered to achieve close joint between tiles.

Fittingonto: Method

Open grating/grille Type ‘S’ fixings (saddle assemblies)

Metal deck Self tap screws or nut, bolt and washer, By welding the protruding weld plates (if chosen), Scotgrip weld assemblies

Concrete HPS impact fixingsWood screws

Page 21: Scotgrip Product Brochure

Walkways/decks/flooring can be made from various

materials including the following: flat steel, aluminium,

concrete or wood. Most of these materials are quite

acceptable when dry but can become extremely

dangerous when wet, soiled or painted.

By installing Scotgrip® FlexTiles not only is this slip

hazard eliminated but the lifespan of the underlying

material is greatly increased. These heavy duty

products are secured either by mechanical fixings or

bonded to existing surfaces.

Calluswithyourrequirements.Eliminate‘SlipsandTrips’onyourwalkways/decks.

• Eliminates‘SlipsandTrips’

• Costeffective

• Hightractionanti-slipsafetyproducts

• Toughanddurable

• Standardsizesandcustommade

• Fullyguaranteed

• Firerated,sparkandfrictiontested

• Noncorrosive

• Easytofitoverexistingwalkways/decks

• Reflectspositivelyonpersonnelperformance

Scotgrip®FlexTilerollsincorporatetheuniqueScotgrip®high-tractionanti-slipsafetysurfacewhichgivesasoundfoot-holdinginthemostextremeconditions.ThesetoughanddurableproductsaremanufacturedunderbSENiS09001:2008qualitycontrolledconditionscomprisingofareinforcedcompositebaseandagradedaggregatesurface.AsaScotgrip®

qualitystandard,theseproductsarefirerated,sparkandfrictiontested.

Providingsafetysolutionstoindustry

Ref: SCGR FlexTile Issue No: 1

Issue Date: Mar 2010 Page No: 1 of 2

No. 10041261No. 23136

FQMFacilitators Quality Management

walkways/decks-iFTSFlexTile

Manufacturersofheavyduty,anti-slipsafetyproducts

Page 22: Scotgrip Product Brochure

HigH-TRACTioNANTi-SLiP

Scotgrip® FlexTiles will provide a sound foot-holding even in the mostextreme conditions and will eliminate ‘Slips and Trips’ in your working environment.

Surface grade: Fine Profile – 1mm aggregate (1/16” approx.)

HigHLyviSibLE

Colour coded in a wide range of colour schemes to suit individual locations.Colour codes are: safety yellow, black/safety yellow, black, green, grey, blue, red, white. fluorescent and photoluminescent finishes Other colours available – please ask.

STANdARdSizESoRToCUSToMERSPECiFiCATioN

Scotgrip® FlexTiles are supplied in a 5m x 1m roll (16’ x 40”) We regularlymanufacture custom sizes to suit individual locations.

EASEoFiNSTALLATioN

Scotgrip® FlexTiles are designed for quick and secure fitting either by mechanicalfixings or bonding to existing surfaces. Scotgrip® products are non-load bearingand must have a suitable underlying structure to be secured to.

QUALiTy–iT’SwHATdRivESUS

All Scotgrip® products are manufactured under BS EN ISO 9001:2008 qualitycontrolled conditions using highly compatible raw materials at our premisesin Banchory, UK.

FURTHERSCoTgRiP®PRodUCTS

If you would like to view the full Scotgrip® anti-slip safety product range that we manufacture, please look at our website: www.scotgrip.comwhere you will find all of our available products and details.

StepintoasaferenvironmentwithScotgrip®

© Copyright 2010. Scotgrip® is a registered trademark of Scotgrip (UK) LimitedScotgrip (UK) Limited may make changes to the design and manufacturing processes of Scotgrip®

anti-slip safety products as part of a continuous programme of improvement and innovation.

SCoTgRiP®oRdERiNg/ENQUiRyiNFoRMATioNWhen ordering Scotgrip® anti-slip safety products, please send us the following details:

Product Type:

Quantity:

Size:

Colour:

Surface grade:

If fixings or adhesives are required, please advise which type of surface you are securing to: (e.g. flat steel, aluminium, concrete, wood):

Forfurtheradviceorinformationcontact:Scotgrip (UK) Limited, Silverbank Industrial Estate, North Deeside Road, Banchory, Kincardineshire AB31 5YR, UKTel: + 44 (0) 1330 825335 Fax: + 44 (0) 1330 825260

Scotgrip (UK) Limited, Westchase Center, 2500 City West Boulevard, Suite 300, Houston, Texas 77042, USATel: + 1 (713) 267 2243 Fax: + 1 (713) 267 2267

e-mail: [email protected] website: www.scotgrip.comRegistered in Edinburgh, Scotland No SC130388 VAT Reg. No. GB553 1222 78 D-U-N-S No 76-676-9954 (Dun & Bradstreet)

walkways/decks-iFTSFlexTile Ref: SCGR FlexTile Issue No: 1 Issue Date: Mar 2010 Page No: 2 of 2

PRodUCT Code

Scotgrip® Anti-Slip FlexTile IFTS

FiTTiNgdATA

We recommend our own fastening systems and adhesives for securing Scotgrip® products.

STANdARdSizES

Custom sizes also available.

For installation details, please go to the Technical section of our website: www.scotgrip.com

Fittingonto: Method

Metal Deck Self tap screws or nut, bolt and washer, or adhesive

Concrete HPS impact fixingsWood Screws or adhesive

5m x 1m (16” x 40”) (Supplied in a roll)

Page 23: Scotgrip Product Brochure

Ladder rungs are made in all shapes and sizes and can

become extremely dangerous when wet, soiled or oily.

By installing Scotgrip® Ladder rung covers (square or

round) not only is this slip hazard eliminated but the

lifespan of the ladder rung is greatly increased. These

heavy duty products are easily fitted onto existing

square and round ladder rungs using adhesives.

Our standard safety yellow ladder rung covers highlight

each rung when climbing or descending the ladder.

These products significantly enhance ladder safety.

Calluswithyourrequirements.Eliminate‘SlipsandTrips’onyourladders.

• Eliminates‘SlipsandTrips’

• Costeffective

• Hightractionanti-slipsafetyproducts

• Toughanddurable

• Standardsizesandcustommade

• Fullyguaranteed

• Firerated,sparkandfrictiontested

• Noncorrosive

• Easytofitoverexistingladderrungs

• Reflectspositivelyonpersonnelperformance

Scotgrip®LadderrungcoversincorporatetheuniqueScotgrip®high-tractionanti-slipsafetysurfacewhichgivesasoundfoot-holdinginthemostextremeconditions.ThesetoughanddurableproductsaremanufacturedunderbSENiS09001:2008qualitycontrolledconditionscomprisingofareinforcedcompositebaseandagradedaggregatesurface.AsaScotgrip®

qualitystandard,theseproductsarefirerated,sparkandfrictiontested.

Providingsafetysolutionstoindustry

Ref: SCGR Ladders Issue No: 1

Issue Date: Mar 2010 Page No: 1 of 2

No. 10041261No. 23136

FQMFacilitators Quality Management

Ladders-LRCRRoundandLRCSSquare

Manufacturersofheavyduty,anti-slipsafetyproducts

Page 24: Scotgrip Product Brochure

HigH-TRACTioNANTi-SLiP

Scotgrip® Ladder rung covers will provide a sound foot-holding even in the mostextreme conditions and will eliminate ‘Slips and Trips’ in your working environment.

Surface grade: Fine Profile – 1mm aggregate (1/16” approx.)

HigHLyviSibLE

Colour coded in a wide range of colour schemes to suit individual locations.Colour codes are: safety yellow, black Other colours available – please ask.

HEAvydUTy

Scotgrip® Ladder rung covers are extremely durable and remain highly effectivefor many years.

STANdARdSizESoRToCUSToMERSPECiFiCATioN

Scotgrip® Ladder rung covers are manufactured in a wide range of standardsizes (see tables opposite). We regularly manufacture custom sizes to suitindividual locations.

EASEoFiNSTALLATioN

Scotgrip® Ladder rung covers are designed for quick and secure fitting, by bonding to existing ladder rungs with adhesives. Scotgrip® products are non-load bearing and must have a suitable underlying structure to be secured to.

QUALiTy–iT’SwHATdRivESUS

All Scotgrip® products are manufactured under BS EN ISO 9001:2008 qualitycontrolled conditions using highly compatible raw materials at our premisesin Banchory, UK.

FURTHERSCoTgRiP®PRodUCTS

If you would like to view the full Scotgrip® anti-slip safety product range that we manufacture, please look at our website: www.scotgrip.comwhere you will find all of our available products and details.

StepintoasaferenvironmentwithScotgrip®

© Copyright 2010. Scotgrip® is a registered trademark of Scotgrip (UK) LimitedScotgrip (UK) Limited may make changes to the design and manufacturing processes of Scotgrip®

anti-slip safety products as part of a continuous programme of improvement and innovation.

SCoTgRiP®oRdERiNg/ENQUiRyiNFoRMATioNWhen ordering Scotgrip® anti-slip safety products, please send us the following details:

Product Type:

Quantity:

Size:

Colour:

Please advise if adhesive is required to secure your ladder rung covers:For installation details, please go to the Technical section of our website: www.scotgrip.com

Forfurtheradviceorinformationcontact:Scotgrip (UK) Limited, Silverbank Industrial Estate, North Deeside Road, Banchory, Kincardineshire AB31 5YR, UKTel: + 44 (0) 1330 825335 Fax: + 44 (0) 1330 825260

Scotgrip (UK) Limited, Westchase Center, 2500 City West Boulevard, Suite 300, Houston, Texas 77042, USATel: + 1 (713) 267 2243 Fax: + 1 (713) 267 2267

e-mail: [email protected] website: www.scotgrip.comRegistered in Edinburgh, Scotland No SC130388 VAT Reg. No. GB553 1222 78 D-U-N-S No 76-676-9954 (Dun & Bradstreet)

Ladders-LRCRRoundandLRCSSquare Ref: SCGR Ladders Issue No: 1 Issue Date: Mar 2010 Page No: 2 of 2

PRodUCTS Code

Scotgrip® Anti-Slip Ladder Rung Covers (square) LRCSScotgrip® Anti-Slip Ladder Rung Covers (round) LRCR

FiTTiNgdATA

We recommend our own adhesives for securing Scotgrip® products.

STANdARdSizES

Custom sizes also available.

LRCS

LRCR

Scotgrip® ladder rung covers - round (LRCR)

Scotgrip® ladder rung covers - square (LRCS)

Fittingonto: Method

Steel Rungs Adhesive

20 25 30 40

inches 3/4 1 11/4 19/16

300 12 ✔ ✔ ✔ ✔

350 14 ✔ ✔ ✔ ✔

400 16 ✔ ✔ ✔ ✔

450 18 ✔ ✔ ✔ ✔

500 20 ✔ ✔ ✔ ✔

LEN

gTH

RoUNd (d iAMETER)mm

20 22 25 30

inches 3/4 7/8 1 11/4

300 12 ✔ ✔ ✔ ✔

350 14 ✔ ✔ ✔ ✔

400 16 ✔ ✔ ✔ ✔

450 18 ✔ ✔ ✔ ✔

500 20 ✔ ✔ ✔ ✔

LEN

gTH

SQUARE (bREAdTH)mm

Page 25: Scotgrip Product Brochure

Stepmate® bridges and ramps are designed to be placed

over the potential hazards of pipes, cables and hoses

in the workplace. These products are lightweight for

easy manual handling and can be used as a temporary

measure or as a more permanent fixture. If required, we

can incorporate protruding steel plates which can be

welded to the deck as a permanent fixture. Stepmate®

bridges and ramps have been designed for pedestrian

and light equipment use only.

Call us with your requirements. Eliminate ‘Slips and Trips’ in your working environment.

• Eliminates ‘Slips and Trips’

• Cost effective

• High traction anti-slip safety products

• Tough and durable

• Standard sizes and custom made

• Fully guaranteed

• Fire rated, spark and friction tested

• Non corrosive

• Easy to fit/lightweight construction

• Reflects positively on personnel performance

Scotgrip® manufactures Stepmate® bridges and ramps which incorporate the unique Scotgrip® high-traction anti-slip safety surface which gives a sound foot-holding in the most extreme conditions. These tough and durable products are manufactured under BS EN IS0 9001:2008 quality controlled conditions comprising of a reinforced composite base and a graded aggregate surface. As a Scotgrip® quality standard, these products are fire rated, spark and friction tested.

Providing safety solutions to industry

Ref: SCGR Stepmate® Issue No: 1

Issue Date: Mar 2010 Page No: 1 of 2

No. 10041261No. 23136

FQMFacilitators Quality Management

Stepmate® Bridges and Ramps

Manufacturers of heavy duty, anti-slip safety products

Page 26: Scotgrip Product Brochure

HIgH-TRACTIoN ANTI-SlIP

Scotgrip® Stepmate® ramps will provide a sound foot-holding even in the mostextreme conditions and will eliminate ‘Slips and Trips’ in your working environment.

Surface grades: High Profile – 6mm aggregate (1/4” approx.) Low Profile – 3mm aggregate (1/8” approx.) Fine Profile – 1mm aggregate (1/16” approx.)

HIgHly vISIBlE

Colour coded in a wide range of colour schemes to suit individual locations.Colour codes are: safety yellow, black/safety yellow Other colours available – please ask.

HEAvy duTy

Scotgrip® Stepmate® ramps are extremely durable and remain highly effectivefor many years.

STANdARd SIzES oR To CuSToMER SPECIFICATIoN

Scotgrip® Stepmate® ramps are manufactured in a wide range of standardsizes (see tables opposite for standard pipe/cable bridges and GP ramps).We regularly manufacture custom bridges/ramps to suit individual locations.Please send a sketch with dimensions and we will get back to you with details.

EASE oF INSTAllATIoN

Scotgrip® Stepmate® ramps can be placed into position quickly and easily due totheir lightweight construction. Stepmate® ramps have been designed for pedestrian and light equipment use only. If necessary, weld tags can be built into the product at manufacturing stage.

QuAlITy – IT’S wHAT dRIvES uS

All Scotgrip® products are manufactured under BS EN ISO 9001:2008 qualitycontrolled conditions using highly compatible raw materials at our premisesin Banchory, UK.

FuRTHER SCoTgRIP® PRoduCTS

If you would like to view the full Scotgrip® anti-slip safety product range that we manufacture, please look at our website: www.scotgrip.com where you will find all of our available products and details.

Step into a safer environment with Scotgrip®

© Copyright 2010. Scotgrip® is a registered trademark of Scotgrip (UK) LimitedScotgrip (UK) Limited may make changes to the design and manufacturing processes of Scotgrip®

anti-slip safety products as part of a continuous programme of improvement and innovation.

SCoTgRIP® oRdERINg/ENQuIRy INFoRMATIoNWhen ordering Scotgrip® anti-slip safety products, please send us the following details:

Product Type:

Quantity:

Size:

Colour:

Surface grade:

Please advise if weld tags are required:

For further advice or information contact: Scotgrip (UK) Limited, Silverbank Industrial Estate, North Deeside Road, Banchory, Kincardineshire AB31 5YR, UKTel: + 44 (0) 1330 825335 Fax: + 44 (0) 1330 825260

Scotgrip (UK) Limited, Westchase Center, 2500 City West Boulevard, Suite 300, Houston, Texas 77042, USATel: + 1 (713) 267 2243 Fax: + 1 (713) 267 2267

e-mail: [email protected] website: www.scotgrip.comRegistered in Edinburgh, Scotland No SC130388 VAT Reg. No. GB553 1222 78 D-U-N-S No 76-676-9954 (Dun & Bradstreet)

Stepmate® Bridges and Ramps Ref: SCGR Stepmate® Issue No: 1 Issue Date: Mar 2010 Page No: 2 of 2

PIPE/CABlE BRIdgES

gP RAMP

Custom sizes also available.

For installation details, please go to the Technical section of our website: www.scotgrip.com

PCB1 PCB2 PCB3 PCB4 PCB5

width 380 15" 610 24" 750 30" 900 36" 1100 43"

height 80 3" 110 4" 140 51/2" 155 6" 200 8"

length 1000 40" 1000 40" 1000 40" 1000 40" 1000 40"

no. of slots 3 3 3 3 3

45w 13/4"w 85w 33/8"w 115w 41/2"w 140w 51/2w 175w 7"w size of slot x x x x x x x x x x 35h 13/8"h 65h 21/2"h 100h 4"h 115h 41/2"h 150h 6"h

weight 10kg 22lbs 18kg 40lbs 24kg 53lbs 29kg 64lbs 36kg 80lbs

S E R I A l N u M B E R

inchesmm

STEPMATE® CuSToM RAMPS

GP1 GP2 GP3 GP4

width 410 16" 450 18" 500 20" 600 24"

height 100 4" 125 5" 150 6" 180 7"

length 1000 40" 1000 40" 1000 40" 1000 40"

a 75 3" 90 31/2" 115 41/2" 140 51/2"

b 175 7" 180 7" 200 8" 230 9"

c 100 4" 100 4" 100 4" 100 4"

weight 12kg 27lbs 14kg 31lbs 15kg 33lbs 17kg 38lbs

S E R I A l N u M B E R

inchesmm

Page 27: Scotgrip Product Brochure

Marine gangways are renowned for being extremely

dangerous, especially when the angle of the gangway

is steep and the surface is wet or oily or both. Some

gangways have metal or wooden spars across the

surface which can be a trip hazard in itself.

By installing Scotgrip® Gangway treads not only is this

slip hazard eliminated but the lifespan of the underlying

material is greatly increased. Scotgrip® Gangway treads

have been designed in 3 different styles (stepped, bar

and elliptical) to suit your individual location.

These heavy duty products are easily fitted onto open

grating/grille, chequered plate or wood.

Calluswithyourrequirements.Eliminate‘SlipsandTrips’onyourgangways.

• Eliminates‘SlipsandTrips’

• Costeffective

• Hightractionanti-slipsafetyproducts

• Toughanddurable

• Standardsizesandcustommade

• Fullyguaranteed

• Firerated,sparkandfrictiontested

• Noncorrosive

• Easytofitoverexistinggangways

• Reflectspositivelyonpersonnelperformance

Scotgrip®gangwaytreadsincorporatetheuniqueScotgrip®high-tractionanti-slipsafetysurfacewhichgivesasoundfoot-holdinginthemostextremeconditions.ThesetoughanddurableproductsaremanufacturedunderbSENiS09001:2008qualitycontrolledconditionscomprisingofareinforcedcompositebaseandagradedaggregatesurface.AsaScotgrip®

qualitystandard,theseproductsarefirerated,sparkandfrictiontested.

Providingsafetysolutionstoindustry

Ref: SCGR GW Issue No: 1

Issue Date: Mar 2010 Page No: 1 of 2

No. 10041261No. 23136

FQMFacilitators Quality Management

gangways

Manufacturersofheavyduty,anti-slipsafetyproducts

Page 28: Scotgrip Product Brochure

HigH-TRACTioNANTi-SLiP

Scotgrip® Gangway treads will provide a sound foot-holding even in the mostextreme conditions and will eliminate ‘Slips and Trips’ in your working environment.

Surface grades: High Profile – 6mm aggregate (1/4” approx.) Low Profile – 3mm aggregate (1/8” approx.) Fine Profile – 1mm aggregate (1/16” approx.)

HigHLyviSibLE

Colour coded in a wide range of colour schemes to suit individual locations.Colour codes are: safety yellow, black/safety yellow, black, green, grey, blue, red, white. fluorescent and photoluminescent finishes Other colours available – please ask.

HEAvydUTy

Scotgrip® Gangway treads are extremely durable and remain highly effectivefor many years.

STANdARdSizESoRToCUSToMERSPECiFiCATioN

Scotgrip® Gangway treads are manufactured in a wide range of standardsizes. We regularly manufacture custom sizes to suit individual locations.

EASEoFiNSTALLATioN

Scotgrip® Gangway treads are designed for quick and secure fitting, either bymechanical fixings or bonding to existing surfaces. These products are pre-drilledwhere required for quick installation. Scotgrip® products are non-load bearing and must have a suitable underlying structure to be secured to.

QUALiTy–iT’SwHATdRivESUS

All Scotgrip® products are manufactured under BS EN ISO 9001:2008 qualitycontrolled conditions using highly compatible raw materials at our premisesin Banchory, UK.

FURTHERSCoTgRiP®PRodUCTS

If you would like to view the full Scotgrip® anti-slip safety product range that we manufacture, please look at our website: www.scotgrip.comwhere you will find all of our available products and details.

StepintoasaferenvironmentwithScotgrip®

© Copyright 2010. Scotgrip® is a registered trademark of Scotgrip (UK) LimitedScotgrip (UK) Limited may make changes to the design and manufacturing processes of Scotgrip®

anti-slip safety products as part of a continuous programme of improvement and innovation.

SCoTgRiP®oRdERiNg/ENQUiRyiNFoRMATioNWhen ordering Scotgrip® anti-slip safety products, please send us the following details:

Product Type:

Quantity:

Size:

Colour:

Surface grade:

If fixings are required, please advise which type of surface you are securing to: (e.g. open grating/grille, chequered plate, flat steel, wood):For installation details, please go to the Technical section of

our website: www.scotgrip.com

Forfurtheradviceorinformationcontact:Scotgrip (UK) Limited, Silverbank Industrial Estate, North Deeside Road, Banchory, Kincardineshire AB31 5YR, UKTel: + 44 (0) 1330 825335 Fax: + 44 (0) 1330 825260

Scotgrip (UK) Limited, Westchase Center, 2500 City West Boulevard, Suite 300, Houston, Texas 77042, USATel: + 1 (713) 267 2243 Fax: + 1 (713) 267 2267

e-mail: [email protected] website: www.scotgrip.comRegistered in Edinburgh, Scotland No SC130388 VAT Reg. No. GB553 1222 78 D-U-N-S No 76-676-9954 (Dun & Bradstreet)

gangways Ref: SCGR GW Issue No: 1 Issue Date: Mar 2010 Page No: 2 of 2

STEPPEdgANgwAyTREAd SerialNogw1

bARgANgwAyTREAd SerialNogw2

ELLiPTiCALgANgwAyTREAdSerialNogw3