screening 2010
DESCRIPTION
screeningTRANSCRIPT
2010
S C R E E N I N G T E C H N O L O G Y
MINERAL PROCESSING
www.at-online.info
No problem!RHEWUM screening machines screen everything you want.From A for asphalt to Z for zinc. You tell us what you need –we plan, design and engineer machines to your specifications.
www.rhewum.com
Precise. Reliable. Powerful.
And now just screen15 tonnes.
Company Profiles
Aviteq 2Derrick® Corporation 3IFE Aufbereitungs GmbH 4ITE GmbH 5Rhewum GmbH 6ThyssenKrupp Steel Europe 7
Circular motion vibrating screen 8Data sheets and tables / Series and types
Trommel screen 16Data sheets and tables / Series and types
Linear motion vibrating screen 18Data sheets and tables / Series and types
Elliptical motion vibrating screen 24Data sheets and tables / Series and types
Tumbler screen / Giratory screen 26Data sheets and tables / Series and types
Others 28Data sheets and tables / Series and types
Analysis and laboratory sieves 36Data sheets and tables / Series and types
Screen linings 38Data sheets and tables / Series and types
Index of manufacturers and suppliers
Screens 13
Screening surfaces 33
Analysis / laboratory sieves 39
Wear 40
Accessories 41
Contents
is published byBauverlag BV GmbHPostfach 12033311 Gütersloh
and is an integral component of the Bauverlag journals AT INTERNATIONAL – Mineral Processing,Tunnel,ZKG International.
1
2
Grizzly
separates, mixes, prepares, doses or simply transports the respectivebulk material to its destination.
AViTEQ Vibrationstechnik GmbH – formed out of AEG Vibrationstechnik– supplies drive components and complete vibration conveyor systemsbased on the latest oscillation conveyor technology. These vibrationengineering systems have decisive advantages in comparison with con-ventional conveyor technology in respect of process engineering, designand safety, and from the standpoint of productivity improvement.
Where automatic systems or installations are to be supplied with partsin a particular orientation, bowl feeders take on the task of arrangingand feeding. Small conveyor devices for removal, conveyance or dosingare used in a very wide variety of branches of industry. For the pharma-ceutical and food industries, there are special design variants whichhave no painted parts, are easy to clean, resistant to UV light, alcoholand formalin, and are ideally suited for use in sterile areas. The mainarea of application of twist screens is for fine-grained products whichplace high demands on throughput performance and dust-free opera-tion. Round screens are driven by low-noise vibration motors or drivecells with vibration segments.
Unordered parts which are conveyed upwards in an ascending spiralpath are to be discharged individually and, most importantly, in a par-ticular orientation at the outlet. Special components – also known aschicanes – ensure that wrongly oriented parts are either brought intothe proper attitude or fall back into the bowl. Because the screen inletsare fastened with rapid closure fasteners, they can be changed quicklyand with little effort. The number of screen decks can be varied easily. Inthe system illustrated, gelatine capsules are withdrawn from supplyhoppers and dosed into a processing machine. The conveyor streamhere is 10 m3/h.
Since 1938 the company has been active inthe field of vibration technology and holds aleading position worldwide. The experiencegained in this field has also been used inscreening practice. Consequently, the deliv-ery program of AVITEC also focuses onscreening machines for the most differenttasks. The following screening machineshave been delivered to the market and runto the full satisfaction of the users:LINEAR-MOTION VIBRATING SCREENS drivenby electromagnetic vibrators, unbalancedmotors and excitersCIRCULAR-MOTION VIBRATING SCREENSwith shaft driveELLIPTICAL-MOTION VIBRATING SCREENSwith individual unbalanced driveDRAINING SCREENS for solid-liquid separa-tionGRIZZLIES for coarse pre-separationFINE SCREENS with infinitely variable mag-netic drive
If the lifecycle of many everyday products istraced back to the beginning of the industri-al process, it rapidly emerges – and perhapsnot surprisingly – that the initial material inthe majority of cases was bulk material. Butin order to arrive at usable end products, arefined technology is required which sorts,
AViTEQ Vibrationstechnik GmbHIm Gotthelf 16D-65795 Hattersheim-EddersheimGermanyTel.: +49 (0) 614 5503-0Fax: +49 (0) 614 5503-200E-Mail: [email protected]: www.aviteq.de
The company – the technology
Draining screen with PU strainers
Solutions for solids handling and processing
discharging andcharginghorizontalconveying
screening,sorting,dewatering
elevating,helicalconveying
compacting
orienting,dosing,storing
cooling,heating,drying,chemicalreactions
3
New 210 μm urethane panels for dry screening
Derrick Polyurethane Screen SurfacesThe development of fine mesh, high open area, urethane screen sur-faces is perhaps one of Derrick’s most notable contributions to the science of fine particle separations. While all urethane screen panels arewell known for their abrasion resistance, only Derrick’s urethane screenscombine long life with high open area, capacity, and performance rival-ing that of conventional woven wire screens. Moreover, its anti-blindingproperties now make it feasible to screen materials previously con-sidered difficult or even impossible to screen.
Processing plants throughout the world have demonstrated significantcost savings through the use of Derrick urethane screens. It’s notuncommon for Derrick urethane screens to last 10 to 30 times longerthan conventional woven wire panels. With openings as fine as 75 microns (200 mesh) and open areas ranging from 35 to 45 per cent,Derrick urethane screen surfaces are suited to a wide variety of wet anddry applications.
Derrick High Speed Dry ScreeningA wide assortment of single deck and double deck dry screening ma-chines are available from Derrick. Each machine is custom engineeredfor the required duty and installation, and comes complete with theappropriate feed box, product collection hoppers, and dust enclosure.The covers and doors on the dust enclosures, together with side ope-nings on the vibrating screen frame, permit easy access for inspection orscreen surface replacement. The lower deck screen surfaces on doubledeck machines can even be replaced without having to remove theupper deck screen surfaces. Compared with other types of vibratingscreens, structural requirements are considerably less with Derrickscreens since they transmit virtually no dynamic load to the surroun-ding support structure.
DERRICK® CORPORATIONFamily owned and located in Buffalo, New York, Derrick Corporation wasfounded in 1951 by H. William Derrick Jr. Derrick is considered the worldleader in the design and manufacture of high frequency vibratingmachines and screen surfaces used to screen a wide variety of wet ordry fine materials in the range of 3/8 inch to 400 mesh (10 mm to 38 microns). Derrick screens are designed to address the specificdemands of the mining, aggregate, chemical, plastics, wastewater andforest products industries.
Derrick Stack SizerThe Stack Sizer has redefined the concept of efficient, fine particle wetscreening. Never before has one screening machine had such a highcapacity in a minimal amount of floor space. Consisting of up to fiveindividual screen decks positioned one above the other and operating inparallel, the Stack Sizer can be fitted with Derrick’s high capacity, longlife, urethane screen surfaces. With this unique combination, fine wetscreening becomes more practical than ever thought possible.Hundreds of Stack Sizers are currently operating at mineral processingplants worldwide and earning significant returns.
Derrick HI-CAP Dewatering MachineAchieving production rates of 300 TPH, per machine, our new proventechnology delivers production sands (concrete, asphalt, mason etc.) toa superior dryness of more than 90% solids (by weight). This is accom-plished by our W motor providing true high G-force linear motion cou-pled with high open area urethane screen surfaces. The HI-CAP machineoffers more than 62 sq. ft. of screen surface area on a single unit. Nearlyhalf of its urethane screen surface is open area, which is fundamentally critical for effective dewatering. The HI-CAP machine is typically fed byscrew classifier product, tank classifier cell feed or large cyclone underflow.
Derrick dry screening machine
HiG-dryer fine sand recovery with pre screening
Stack Sizer Sizing for fine sand
www.DerrickCorp.com
Product lines Electromagnetic and electromechanical vibroconveyorsScreening machinesMagnetic separators
Customers Recycling,WasteSand and gravelIron and Steel worksCoalFoundriesMinesSlag recycling
Staff members: 74
RepresentationsIn nearly all European states, Japan, Taiwan. Korea, China, South Africa,Australia
IFE Aufbereitungstechnik GmbH
For more than 60 years, IFE Aufbereitungstechnik GmbH has been deal-ing with the construction of machines for bulk material handling.Machine developments and performances in engineering marked thebeginnings of our company’s history. The name of the company is derived from the notions of research and development.
Institute for technical research and developmentStarting with the set-up of its own production department, IFE has developed steadily over the following years.The first products were elec-tromagnetic vibroconveyors. The high quality of the machines and the related economic success have made IFE a known producer in this field.The product range has subsequently been enlarged by electromechani-cal vibroconveyors, screening machines and magnetic separators. Today,innovative developments such as flip-flop screens, hard material separa-tors and waste screens offer extensive package solutions for problemsexperienced in the field of material handling.Besides supplying to traditional industries, IFE offers the recycling indus-try a wide range of excellent screens, separators, magnets and eddy cur-rent separators. A considerable number of projects realized so far under-lines the leading position of IFE in the recycling industries.Our market position is supported by technical and manufacturing know-how as well as by an extensive knowledge of process and application en-gineering contributing to solid growth.
ife aufbreitungstechnik gmbhPatertal 20A-3340 Waidofen an der YbbsTel.: +49 7442 515-0Fax: +49 7442 515-15www.ife-bulk.com
Screening station for granite
Linear motion screen in a steel work
Dewatering screen with unbalance motors for sand and gravel
Waste screen with special screen panel for the recycling industry
4
ITE panel screens are designed to be installed on ITE vibration shakers for the purpose of dewatering heterogeneous solid-liquid mixtures.They operate at an acceleration force of more than 6 G and set thescreens into motion, which separate the solid particles contained in thesuspension into fractions and dewater the disperse solids mixture. Thepre-stressed, fine-meshed screen material allows for a separation of fineparticles in the critical range of 100 to 45 microns. Various mesh widthspermit optimum adjustment of the panel screens to the properties of the suspension (grain size, viscosity etc.). The complete plane surface ofthe rectangular mesh design, which can be easily repaired using screenrubber plugs, provide maximum dewatering efficiency and a long product life of the screens made of high-quality, state-of-the-artmaterials. In addition, the hammer-wedge attachment system providesa fast and uncomplicated exchange of the panel screens.Should you be faced with an unresolved problem in the separation technology sector, simply challenge us and submit your request [email protected] flow line to disposal, ITE has the solutions to your separation andwaste management issues.
ITE GmbH
ITE GmbH is a young and innovative company which is based in Alsdorf –near Aachen – and is specialized in the field of solid-liquid separationmainly by means of fine screening technology. Well-proven equipmentused in the oil field business form a solid bedrock to meet all require-ments in the field of solid-liquid separation. Many years of experiencewith processing of drilling mud or slurries in tunneling prove the successand popularity of a forward-looking technology. Together with our cus-tomers we develop customized solutions and best available technologyfor various types of applications.� Treatment of slurries and drilling fluids in the construction sector (e.g.
Mining, Horizontal and Vertical Drillings)� Recovery of industrial slurries (e.g. oil sludge, steelwork sludge, coke
dust, tar oil, fiberglass water mixtures)� Agriculture (e.g. cleaning and dewatering of manure, cow dung and
organic waste)� Sludge dewatering in sand and gravel processing� Dredging of rivers and creeksAs manufacturer and vendor of vibration shakers, hydrocyclones, de-canter centrifuges and turnkey separation systems ITE GmbH is able tocover a wide range of applications and serve an answer to many prob-lems in the field of separation, even in the event of 3-phase applications.All ITE shakers share the same simple design and rugged components.With minimal replacement parts and a reliable, low-maintenance drivesystem, ITE shakers provide years of dependable, economical service.These space saving, high volume, efficient suspension cleaning ma-chines combine the efficiency of linear motion with the cost effectivepre-tensioned screen panels.
ITE GmbHKonrad-Zuse-Str. 22D-52477 AlsdorfTel.: +49 2404-67258-0Fax: +49 2404-67258-58www.separation.de
ITE facilities Alsdorf ITE screening machine 3 PSM with washing system
Processing of brown coal dust slurries, Open cast mining
Treatment of slurries and drilling fluids by ITE fine screening technology
5
6
complete machines. RHEWUM also offers the analysis of steel structuresand/or floors of existing or planned buildings to test its suitability as installation location of vibrating machines. All RHEWUM screening machines are designed and manufactured in Remscheid at RHEWUM’sown premises. Each screening machine leaving our works is thoroughlytested for several hours, thus enabling us to ensure a top quality product.All RHEWUM Machines are ISO 9001:2000 certified together with a CE Certification.When designing and optimizing production plants, it is nowadays neces-sary to carry out trials despite all the new developments in this field suchas computer simulation etc.The RHEWUM testing facilities offer our cus-tomers the possibility to compare the laboratory results with the respec-tive product requisitions. These results play a significant role in the de-sign process of the respective machine guaranteeing its later success inthe production.To ensure a reliable and high-quality production process to our cus-tomers the start-up of the screening machines is accompanied by one ofRHEWUM’s well qualified commissioning supervisors. The after salesservice as well as the design and manufacturing process are character-ized by the close collaboration between our construction and sales engi-neers and our commissioning supervisors. Together with a modern en-terprise planning system (ERP-system) the quick and dependable servicefor RHEWUM’s customers is guaranteed at all times.
RHEWUM GmbH – Precise. Reliable. Powerful.
RHEWUM has been developing and manufacturing screening machinesand vibrating feeders since the beginning of the 1950s. These cover theentire field of dry, wet and analysing screens for a vast variety of applica-tions e.g. fertilizer, minerals, chemicals, sugar, salt etc. for leading compa-nies worldwide.Our customer’s requirements serve us as a benchmark and challenge – acontinuous and economic production of well-defined products in repro-ducible qualities. By choosing our screening and classifying technologyour customers are always one step ahead of their competitors as they areable to offer the finest quality products.RHEWUM’s delivery programme covers inclined screening machineswith direct excitation of the screen cloth as well as with double-frequen-cy drive systems, linear and circular motion screening machines, ma-chines for wet screening and air jet analysing screens. In additionRHEWUM supplies the vibrating feeding systems for the various screening machines as well as vibrating conveyors. As an additional service RHEWUM supports raw material processing companies as well asvibrating machine manufacturers in machine design by use of the computer simulation programme ANSYS. By use of ANSYS RHEWUMforecasts the static and dynamic characteristics of components and
RHEWUM GmbHwww.RHEWUM.com
RHEWUM screening machines: at the top the inclined screen type WAU and at thebottom the linear motion screen type MDS
RHEWUM testing facilities
RHEWUM inclined screening machines type WA for the screening of Dolomite
Dynamic model of screen base frame generated by ANSYS
We use advanced rolling and heat treatment methods such as normaliz-ing and thermomechanical rolling, accelerated cooling, water/airquenching and direct hardening to give our products exactly the proper-ties customers expect.
ThyssenKrupp Steel Europe manufactures water quenched steels on amodern roller or stationary quench unit which enables the production oftop-quality heavy plate in light and heavy gauges by making use of thespecific advantages of the individual lines.
ThyssenKrupp heavy plate is used wherever extreme strength is required– for example in the manufacture of screens,crusher plants,dump trucks,crawlers and excavators. Our XAR® special structural steels give manu-facturers of hard-wearing construction equipment a material which istough, durable and reliable. A consistent focus on application is also a factor when designing mobile cranes: Our quenched and tempered N-A-XTRA® and XABO® steels offer low weight, high strength and closethickness tolerances.
ThyssenKrupp Steel Europe
Heavy plate Thinking the future of steel means keeping a constant eye on customerrequirements. This approach enables us to make products which areamong the most efficient of our age, both technically and economically.This is certainly true of ThyssenKrupp Steel Europe heavy plate. It is thebasis for high-strength, low-weight steel structures providing maximumrobustness and load-bearing capacity.
Our special structural steels are manufactured in state-of-the-art pro-duction facilities which have been continuously modernized and ex-panded in recent years. We produce roughly a million metric tons ofheavy plate per year for a wide range of applications on our four-highrolling mill and hot strip cut-to-length lines. Continuous material inspec-tions and process controls guarantee consistently high steel quality.
ThyssenKrupp Steel Europe AGHeavy Plate UnitKaiser-Wilhelm-Str. 10047166 Duisburg, GermanyPostal address: 47161 Duisburg, GermanyTel.: +49 203 52-75604Fax: +49 203 52-75653roland.riesbeck@thyssenkrupp.comwww.thyssenkrupp-steel-europe.com/plate
Excavator bucket and dump truck body made of XAR®
XAR® screen
Rolling mill stand
7
Exter
nal h
eight
[mm]
Exter
nal w
idth [
mm]
Exter
nal le
ngth
[mm]
Scre
en su
rface
(bx l
) [m
mxm
m]
Open
area
[m2 ]
No. o
f scr
een d
ecks
Total
weig
ht of
scre
en [t]
Capa
city [
t/h]
CIRCULAR MOTIONVIBRATING SCREEN
Technical specifications
AMMANN SCHWEIZ AG500 - 3000 500 - 3300 1500 - 9000 500 x 1500 - 3300 x 9000 Depending on 1 - 4 0.5 - 20 Up to 1000
screening surfaceDifferent Types: Classification Screen, DewateringScreen, Bar Screen, Banana Screen, Stage Screen
AVITEQ VIBRATIONSTECHNIK GMBH Shaft drive 2000 -2500 1200 - 2700 2200 - 7200 1000 x 2500 - 2000 x 7000 Depends on 1 - 3 Up to 10 Up to 800Type VSK mesh size
Unbalance motor 500 - 1600 600 - 2000 1100 - 2700 400 x 1500 - 900 x 2500 Depends on 1 - 3 Up to 1.4 Up to 350Type VSE mesh size
BINDER + CO AG 1000 - 5000 1000 - 3500 2000 - 10000 0.84 - 31 m2 Depending on 1 - 3 1 - 20 t Up to 1000
screening surface
DBR FÖRDERTECHNIK GMBH1000 - 1500 1400 - 3300 1500 - 8000 800 x 1500 - 2500 x 8000 1 1 - 81200 - 2000 1600 - 3300 2000 - 8000 800 x 2000 - 2500 x 8000 2 2 - 161200 - 2000 1600 - 3300 3000 - 8000 1000 x 3000 - 2500 x 8000 2.5 2.5 - 16.51600 - 2200 1800 - 3300 4000 - 7000 1000 x 4000 - 2500 x 7000 3 4 - 17
DERRICK CORPORATIONRepulp F48-120R-4 About 3140 About 1480 About 4500 - 3400 1200 x 3000 Depending on screening 1 About 1.5 - 2.5 t 10 - 100
surface ca. 30 - 50 %Dry Screen Max. 3500 About 700 - 1400 About 2000 - 4000 1.1 - 5.2 m2 Depending on screening 1 - 2 1.5 - 5 t Material-dependent
surface 40 - 65 %
HAVER & BOECKER, MÜNSTER GERMANY
HAVER NIAGARA® 2-bearing screen –in concentric shaft design 600 - 4500 770 - 5000 1150 - 9000 400 x 600 - 3000 x 8000 35 - 60 % 1 - 5 (7) 0,12 - 25 Up to 1000
HAVER NIAGARA® 4-bearing screen –in eccentric shaft design 1600 - 4300 2350 - 5000 2250 - 9000 1000 x 2000 - 2700 x 8000 35 - 60 % 1 - 4 1,9 - 32 Up to 3000
HAVER NIAGARA® Speed-Line –High frequency screen 2600 1600 - 2100 3250 1000 x 3000 - 1500 x 3000 35 - 60 % 1 1,2 - 1,4 Up to 80
HEIN, LEHMANN TRENN- UND FÖRDERTECHNIK GMBH UK-ED/DD 1000 - 1800 900 - 2900 2500 - 8000 900 - 2400 x 2500 - 7000 Depending on Max. 2 1 - 9 Material-dependent
screening surface
JÖST GMBH + CO. KGUnbalance motorSVE 300 x 600 - 1400 x 3000 0.18 - 4.2 1 0.2 - 1.5 Up to 350
SVZ 300 x 600 - 1400 x 3000 0.36 - 8.4 2 0.3 - 2.6 Up to 350
SVD 300 x 600 - 1200 x 2500 0.54 - 9.0 3 0.4 - 2.8 Up to 250
SVV 300 x 600 - 1200 x 2500 0.72 - 12.0 4 0.5 - 3.0 Up to 250
Shaft driveSWE 1000 x 2000 - 3500 x 7000 2.0 - 24.5 1 0.9 - 6.5 Up to 2000
SWZ 1000 x 2000 - 3500 x 7000 4.0 2 1.3 - 9.8 Up to 2000
SWD 1000 x 2000 - 2500 x 6000 6.0 3 1.7 - 9.5 Up to 1100
SW 1000 x 2000 - 2500 x 6000 8.0 4 2.0 - 10.5 Up to 1100
F.B. LEHMANN MASCHINENFABRIK GMBH
830 - 1530 600 - 1750 0.17 - 2.37 m2 Depending on 1 - 4 0.2 - 1.15 0.01 - 15, depending onscreening surface mesh size and material
MERZ AUFBEREITUNGSTECHNIK GMBH
Shaft drive 1000 - 2000 800 - 1500 1600 - 4000 1.3 - 6.0 m2 1.3 - 6.0 1 - 4 0.8 - 5.5 20 - 2000
8
Max
. feed
parti
cle si
ze [m
m]
No. o
f pos
sible
prod
uct
fracti
ons
Prod
uct p
artic
le siz
e(s) [m
m]
Requ
ired p
ower
[kW
]
Up to 500 2 - 5 0.1 - 500 1.4 - 45
300 Max. 45
100 Max. 4.3
Up to 1000 5 1 - 300 2.0 - 55
4 - 305.5 - 455.5 - 4511 - 45
About 6 - 8 2 - 3 74 μm - 2 mm 2 x 1,9
6 - 8 2 - 5 32 μm - 6 mm 1.9 - 3.5
Up to 300 8 Depending on the product 1.5 - 45
Up to 1500 5 Depending on the product 7.5 - 90
Up to 25 2 Depending on the product 0.9 - 1.3
Material-dependent 3 Material-dependent Up to 30
Up to 200 2 1 - 50 0.6 - 9.5
Up to 200 3 1 - 50 0.8 - 9.5
Up to 200 4 1 - 50 1.2 - 9.5
Up to 200 5 1 - 50 1.2 - 9.5
Up to 300 2 1 - 100 4.0 - 18.5
Up to 300 3 1 - 100 4.0 - 30.0
Up to 300 4 1 - 100 5.5 - 30.0
Up to 300 5 1 - 100 5.5 - 30.0
Ca. 10 Max. 5 Ultrafine 1.1 - 4.0up to 10
200 6 1.0 - 200.0 3.0 - 22.0
State-of-the-art machinery and
a team of qualified experts
manufacture wire cloth and wire
cloth products.
� Industrial wire screens,
screen frames and
re-screening service
� Ultrasonic screening systems
with frequency variations
� Test sieves and test sieve
shakers
� Rotating sample reducer and
sample splitters
� Photo-optical particle analysers
for the measuring range from
0,010 mm up to 400 mm
SCREENING - ANALYSIS - FILTRATION.
HAVER & BOECKER
DIE DRAHTWEBER
HAVER & BOECKEREnnigerloher Straße 64, 59302 OELDE, GERMANYPhone: +49-2522-300, Fax: +49- 2522-30 404E-Mail: [email protected]: www.weavingideas.com
Exter
nal h
eight
[mm]
Exter
nal w
idth [
mm]
Exter
nal le
ngth
[mm]
Scre
en su
rface
(bx l
) [m
mxm
m]
Open
area
[m2 ]
No. o
f scr
een d
ecks
Total
weig
ht of
scre
en [t]
Capa
city [
t/h]
CIRCULAR MOTIONVIBRATING SCREEN
Technical specifications
METSOMetso RF 1500 x 4200 - 3000 x 7300 Depends on mesh size 1 - 2 4.5 - 22.5 Up to 2000
Metso RF-P 1500 x 4200 - 3000 x 6100 Depends on mesh size 1 - 2 5 - 20.5 Up to 2000
Metso KS (circular) 800 x 2000 - 2500 x 7000 Depends on mesh size 1 - 3 0.8 - 13 Up to 1000
Metso CVB 1500 x 4000 - 2830 x 6100 Depends on mesh size 1 - 4 3.1 - 15 Up to 1000
Metso CVB-P 1500 x 4000 - 2830 x 6100 Depends on mesh size 1 - 4 3.1 - 15 Up to 1000
MFL MASCHINENFABRIK LIEZEN UND GIESSEREI GES.M.B.H.
800 - 3000 1000 - 3500 3000 - 8000 800 x 2000 - 2400 x 7000 Variable 1 - 4 1.2 - 15 Up to 1200
MOGENSEN Sizer 700 - 2500 500 - 1500 1600 - 2500 1500 x 1300 Depending on 1 - 4 0.8 - 2.0 Depending on mesh size
mesh size
RHEWUM GMBHMulti deck screen depends on number 2790 3990 2400 x 2800 up to 23 depends on numberMDS of screen decks of screen decksOther sizes depends on number 2530 3990 2000 x 2800 up to 23 depends on numberon request of screen decks of screen decks
depends on number 1920 3000 1400 x 2000 up to 23 depends on numberof screen decks of screen decks
depends on number 1490 3990 1000 x 2800 up to 13 depends on numberof screen decks of screen decks
depends on number 1490 2900 1000 x 2100 up to 13 depends on numberof screen decks of screen decks
depends on number 1020 3000 700 x 2000 up to 13 depends on numberof screen decks of screen decks
depends on number 720 1650 500 x 1400 up to 13 depends on numberof screen decks of screen decks
depends on number 720 1100 500 x 700 up to 13 depends on numberof screen decks of screen decks
UG screen 2900 2600 5900 2100 x 5000 1 5.5 130Other sizes onrequest
UW screen 1500 2200 3800 1500 x 3000 2 3.0 100Other sizes on
3200 2300 5000 1600 x 4500 3 5.0 86request3200 2500 5000 1800 x 4500 2 5.5 200
3000 2500 5500 1800 x 5000 2.5 6.5 140
ROCKSTER RECYCLER
Screening box RS83 2400 2350 5000 1200 x 1800 Depending on 1 2 Up to 180optional accessorie for (R800/R900) screening surface
Screening box RS94 2520 2400 5630 2200 x 1350 Depending on 2.3 Up to 250optional accessorie for (R1000/R1100) screening surface
Screening plant RDS 3000 2580 2330 8600 1200 x 2400 Depending on 2 10.5 Up to 200screening surface
RUBBLE MASTER HMH GMBHTS3600 3200 2550 11100 2 x 3000 x 1250 Depending on 2 15,5 Up to 200
screening surface
10
Max
. feed
parti
cle si
ze [m
m]
No. o
f pos
sible
prod
uct
fracti
ons
Prod
uct p
artic
le siz
e(s) [m
m]
Requ
ired p
ower
[kW
]
Up to 300 3 1 - 150 15 - 60
Up to 600 3 1 - 150 15 - 60
Up to 600 4 1 - 150 4 - 37
Up to 200 5 1 - 70 15 - 30
Up to 400 5 1 - 150 15 - 30
Up to 1000 5 Variable Up to 37
Ca. 50 Max. 5 0.2 - 50 1 - 6
10 up to 24 0,025 - 10 depends on numberof screen decks
10 up to 24 0,.025 - 10 depends on numberof screen decks
10 up to 24 0,025 - 10 depends on numberof screen decks
10 up to 14 0,025 - 10 depends on numberof screen decks
10 up to 14 0,025 - 10 depends on numberof screen decks
10 up to 14 0,025 - 10 depends on numberof screen decks
10 up to 14 0,025 - 10 depends on numberof screen decks
10 up to 14 0,025 - 10 depends on numberof screen decks
30 3 Depending on product 15
specification
80 3 50, 5 10
100, 400 4 50, 60, 24 12
45 3 32, 2 15
32 4 16, 8, 2 5, 2
100 2 > 4 17
80 2 > 4 21
100 3 > 4 40
Up to 250 3 4 - 100 41.5
Rundsiebe
…es kann ruhig auch mal „rundgehen“
Neben den bekannten AViTEQ Sieben - Linearschwingsiebe - Stabrostsiebe- Kreisschwingsiebe- Ellipsensiebe - Entwässserungssiebe
werden in vielen Anwendungen Rundsiebe eingesetzt. Rundsiebe mit Zentralantrieb werden vorzugsweise zur Trockensiebung mit geringer Leistung eingesetzt. In Sonderfällen erfolgt der Einsatz zur Trennung von Flüssigkeit und Feststoff (Papierindustrie). Rundsiebe mit Außenantrieb dienen insbesondere zur Schutzsiebung und Entstaubung. Die Siebkörper werden überwiegend aus Edelstahl ausgeführt und durch Unwuchtmotorenangetrieben. Zur Freihaltung der Siebbeläge könnenKugelklopfeinrichtungen und in Sonderfällen Ultraschallerreger zum Einsatz kommen.
AViTEQ bietet ein komplettes Geräteprogramm in vielen Ausführungsvarianten hierzu an.
Im Gotthelf 1665795 Hattersheim Tel.: 06145 – 503 0
Fax: 06145 – 503 200 E-Mail: [email protected]
www.aviteq.de
11
1212
Exter
nal h
eight
[mm]
Exter
nal w
idth [
mm]
Exter
nal le
ngth
[mm]
Scre
en su
rface
(bx l
) [m
mxm
m]
Open
area
[m2 ]
No. o
f scr
een d
ecks
Total
weig
ht of
scre
en [t]
Capa
city [
t/h]
CIRCULAR MOTIONVIBRATING SCREEN
Technical specifications
SANDVIK
Grizzly Screens, SG…H 2234 - 3177 1200 - 1500 3600 - 4000 Depends on model 4.3 - 6 1 - 2 4.33 - 9.41Master-Flo XS Xtra heavy Screens 2789 - 4565 1200 - 2400 3600 - 6000 Depends on model 4.3 - 14.4 2 - 3 3.48 - 10.5Master-Flo CS Classification Screens 1955 - 5580 900 - 2700 3000 - 8000 Depends on model 2.7 - 21.6 2 - 4 1.7 - 19.44Inclined vibration Screen MSO 1210 - 2555 1020 - 2420 3000 - 7000 Depends on model 3.0 - 16.8 1 - 3 1.63 - 11.55New Generation SC 1200 - 3000 3600 - 8400 Depends on model 4.3 - 25.2 2 - 4 4.1 - 22.5QA450 (S-7) 6477 18374 18211 3048 x 1524 4.5 m2/Deck 3 35 Material-dependent
in operational positionQA440 (S-6) 6676 18374 18211 3048 x 1524 4.5 m2/Deck 2 32 Material-dependent
in operational positionQA340 (S-5) 6165 16829 17835 2439 x 1524 3.6 m2/Deck 2 28 Material-dependent
in operational positionQA240 (S-4) 5559 16829 15864 1524 x 1524 2.2 m2/Deck 2 27 Material-dependent
in operational positionQA140 (S-3) 5174 16829 15143 3048 x 1524 4.5 m2/Deck 2 22 Material-dependent
in operational positionQA430 (570) 6209 16300 18243 5400 x 1500 8.1 m2/Deck 2 32 Material-dependent
in operational positionQA330 (542) 5050 15300 15805 3600 x 1524 5.4 m2/Deck 2 26 Material-dependent
in operational position
SBM MINERAL PROCESSING GMBHSBM-Circular-motion vibrating screen 1300 - 3400 1620 - 3500 2700 - 7700 900 x 2000 - 2700 x 7000 1.8- 24 m2/Deck 1, 2, 2.5, 3, 3.5 Depending on the Individual design based on the
Depending on application Depending on application Depending on application Depend. on applic.. number of cuts, grading curve of feed material,requirements requirements requirements requirements type of screen material properties and required
KQ = Tansverse stress system surface and screen separation (up to 1000 t/h)KS = Modular screen cloth system load
EuP(R)MMh0910
www.linatex.com
World Class SolutionsThe Linatex G4 Pump range offers both hard metal and rubber lined slurry pumps specifically designed for very abrasive materials.
Featuring wear parts in Linatex Premium Rubber or high chrome iron, a variety of gland options and replaceable inlet /liners, Linatex G4 pumps are built to outlast and out perform the rest.
Linatex boasts over 70 years of global experience designing and building heavy duty slurry pumps. Contact us now for more information on +44 (0)1252 743000or visit www.linatex.com
Max
. feed
parti
cle si
ze [m
m]
No. o
f pos
sible
prod
uct
fracti
ons
Prod
uct p
artic
le siz
e(s) [m
m]
Requ
ired p
ower
[kW
]
800 - 1200 2 - 3 18.5 - 22400 3 - 4 140 - 22 11 - 2 x 30150 3 - 5 80 - 2 5.5 - 2 x 30300 2 - 4 140 - 2 5.5 - 2 x 15
2 - 4 15 - 2 x 37Material-dependent 5 Material-dependent 74.9 kW/2200 rpm
Material-dependent 4 Material-dependent 74.9 kW/2200 rpm
Material-dependent 4 Material-dependent 74.9 kW/2200 rpm
Material-dependent 4 Material-dependent 74.9 kW/2200 rpm
Material-dependent 4 Material-dependent 74.9 kW/2200 rpm
Material-dependent 4 Material-dependent 75 kW/2200 rpm
Material-dependent 4 Material-dependent 75 kW/2200 rpm
150 (200) 2 - 5 Screening at app. 1–100 mm Depending onmachine type and
material
13
Screens
ALLGAIER PROCESS TECHNOLOGY GMBHUlmer Str. 75 D-73066 UhingenTel.: +49 / 71 61 / 3 01-3 53Fax: +49 / 71 61 / 3 42 [email protected]
AMMANN SCHWEIZ AGEisenbahnstr. 25CH-4901 LangenthalTel.: +41 / 62 / 916 64 64Fax: +41 / 62 / 916 64 [email protected]
14
Exter
nal h
eight
[mm]
Exter
nal w
idth [
mm]
Exter
nal le
ngth
[mm]
Scre
en su
rface
(bx l
) [m
mxm
m]
Open
area
[m2 ]
No. o
f scr
een d
ecks
Total
weig
ht of
scre
en [t]
Capa
city [
t/h]
CIRCULAR MOTIONVIBRATING SCREEN
Technical specifications
SCHENCK PROCESS GMBH
Rota Class® 1100 - 2500 2100 - 3900 4690 - 8690 1300 x 4000 - 3100 x 8000 5.2 - 24.8 1, 2, 3 2.5 - 12.0 Material-dependent
SCREENING TECHNOLOGY CONSULTING
Single-deck screen 1855 - 2395 1750 - 3000 4000 - 6300 1250 x 4000 - 2500 x 6300 5.0 - 15.7 1 1.4 - 3.2 250 - 780
Double-deck screen 2350 - 3190 1750 - 3000 4000 - 6300 1250 x 4000 - 2500 x 6300 10.0 - 31.4 2 1.9 - 4.3 250 - 780
SIEBTECHNIK GMBH 600 - 3000 1000 - 10 000 400 - 2700 x 800 - 9000 Depending on Max. 3 Up to 14 t Depending on
screening surface application requirements
SPALECK GMBH + CO. KGSEK/SEW 500 - 2500 600 - 3500 1200 - 7000 400 x 1000 - 2600 x 6000 0.35 - 15 1 Up to 5 Up to 500
SZK/SZW 500 - 2500 600 - 3500 1200 - 8000 400 x 1000 - 2600 x 6000 0.7 - 30 2 Up to 9 Up to 500
SDW 800 - 2500 1000 - 3500 1500 - 8000 600 x 1500 - 2600 x 6000 1.5 - 45 3 Up to 20 Up to 500
SWECO EUROPE Universal round motionrectangular separator 1700 2000 3900 900 x 1200 3.7 Max. 2 2 Up to 100
Round motionrectangular separator 1700 2000 3900 900 x 1200 3.7 Max. 2 2 Up to 100
Round separator X572 1200 2000 2000 1800 x 1800 2.5 Max. 3 1.2 70
THYSSENKRUPP FÖRDERTECHNIK GMBH Turbo ED 1000 - 2500 3000 - 8000 1000 x 3000 - 2500 x 8000 1.5 - 10 1 2 - 9 40 - 2000
Turbo DD 1000 - 2500 3000 - 8000 1000 x 3000 - 2500 x 8000 3 - 20 2 4 - 11 40 - 2000
Turbo 3D 1200 - 2500 3000 - 7000 1200 x 3000 - 2500 x 7000 4.5 - 26 3 6 - 12 40 - 2000
Turbo 4D 1400 - 2500 3000 - 6000 1400 x 3000 - 2500 x 6000 8.5 - 30 4 7 - 12 40 - 2000
WIMA WILSDRUFFER MASCHINEN- UND ANLAGENBAU GMBH 900 x 2000 - 3000 x 8000 1 ca. 0.8 - 9.5
900 x 3000 - 3000 x 8000 2 ca. 1.5 - 16.5
1200 x 4000 - 3000 x 8000 2.5 ca. 2.9 - 18.3
1200 x 4000 - 3000 x 8000 3 ca. 3.5 - 23.9
IMMEDIATE DELIVERY OF: USED AND UNUSED
QUARRY EQUIPMENT AND RECYCLING MACHINERY
HENSEN SOERENDONK (NL)(80 km from the Ruhr District)
Tel. 00-31-495-592388, Fax 00-31-495-592315
± 50 CRUSHERS (jaw, roller, impact, hammer and percussion crushers, etc.) from 500 to 100 000 kg weight (manufactured by Hazemag, Aubema, Krupp, SBM Wageneder, etc.)
± 100 SCREENS – screen length from 1 000 to 8 800 mm, width from 300 to 2 500 mm (manufactured by Siebtechnik, Niagara, Schenck, Främbs & Freudenberg, UHDE, Wageneder, etc.)
± 90 FEEDERS/HOPPERS – lengths from 500 to 8 000 mm, width from 300 to 2 600 mm, controllable and with unbalance motors (manufactured by AEG, UHDE, Jöst, etc.)
± 90 OVERBELT MAGNETS, MAGNETIC ROLLERS, LIFTING MAGNETS. Belt width from 400 to 2 000 mm (manufactured by Steinert, Wagner, Humboldt, etc.)
– ELECTRIC MOTORS to 400 kW (hundreds) (German makes)– GEARED MOTORS and GEARBOXES (hundreds) (Bauer, SEW, TGW, Hansen Patent,
etc.)– BELT CONVEYORS complete and in parts
e-Mail: [email protected] www.hensen.com
Perfekt einlochen!
Karlstr 12 45739 Oer-Erkenschwick
Tel.: 02368 54534 Fax: 02368 57782
Wir liefern hochpräzise Lochbleche für eine Vielzahl von Anwendungen
weitere Informationen unter: www.velofa.de Anfragen auch unter: [email protected]
15
Max
. feed
parti
cle si
ze [m
m]
No. o
f pos
sible
prod
uct
fracti
ons
Prod
uct p
artic
le siz
e(s) [m
m]
Requ
ired p
ower
[kW
]
1000 4 1 - 1000 7.5 - 37
150 2 0.5 - 80 7.5 - 22
150 3 0.5 - 80 11 - 30
Depending on Max. 4 Depending on Up to 30application requirements application requirements
Up to 500 2 - 3 0 - 200 Up to 15
Up to 500 3 - 4 0 - 200 Up to 22
Up to 500 4 - 5 0 - 200 Up to 30
20 3 0.5 - 4.0 4
20 3 0.5 - 4.0 4
20 4 0 - 10 4
1200 1 - 2 2 - 500 5.5 - 55
1000 2 - 3 2 - 500 7.5 - 55
300 3 - 4 2 - 200 11 - 55
300 4 - 5 2 - 200 15 - 55
3.0 - 2 x 18.5
4.0 - 2 x 30.0
11.0 - 2 x 30.0
11.0 - 3 x 30.0
APEX-LIEBEN GMBH CRUSH & SCREENTECLeopold-Hoesch-Str. 1D-52511 GeilenkirchenTel.: +49 / 24 51 / 4 09 58 84Fax: +49 / 24 51 / 4 09 58 [email protected]
AVITEQ VIBRATIONSTECHNIK GMBHIm Gotthelf 16D-65795 EddersheimTel.: +49 / 61 45 / 503 214Fax: +49 / 61 45 / 503 [email protected]
AUGUST MÜLLER GMBH & CO. KGHochmaurenstraße 9D-78628 RottweilTel.: +49 / 7 41 / 28 02-0Fax: +49 / 7 41 / 28 [email protected]
BACKERS MASCHINENBAU GMBHAuf dem Bült 42D-49767 TwistTel.: +49 / 59 36 / 93 67-0Fax: +49 / 59 36 / 93 [email protected]
16
Exter
nal h
eight
[mm]
Exter
nal w
idth [
mm]
Exter
nal le
ngth
[mm]
Scre
en su
rface
(bx l
) [m
mxm
m]
Open
area
[m2 ]
No. o
f scr
een d
ecks
Total
weig
ht of
scre
en [t]
Capa
city [
t/h]
TROMMEL SCREEN Technical specifications
SBM MINERAL PROCESSING GMBHDTS 20/33-2 mobile 4000 2550 10270 40 2 13000 Material dependent
DTS 22/55-2 stationary Variable 3000 8000 16 2 14500 Material dependent
ETS 22/43-1 mobile 4000 3000 16000 21 1 45000 Material dependent
ETS 22/55-1 stationary 4000 3000 8000 21 1 12000 Material dependent
ETS 22/55-1 mobile 4000 3000 16000 26 1 42000 Material dependent
ETS 24,5/55-1 stationary 4000 3000 8000 26 1 18000 Material dependent
STAPPERT SPEZIAL-STAHL HANDEL GMBH, ABRASERVICEComplete Screens in bis 2500 bis 6000, 8000several highly wear
resistant qualities acc.to customer drawing
CREUSABRO®
EXCLUSIVE SALES –ABRAService
ZEMMLER Siebanlagen
MULTI SCREEN® MS 1600 3150 2500 6500 Inner screen surface 12 2 3.5 5 - 50 m3/h mobile 5.2 m2 depending on material,
Outer screen surface mesh size and feeding
6.5 m2
MULTI SCREEN® MS 1600 ST 3200 2585 2632 Inner screen surface 12 2 2.5 5 - 50 m3/h stationary 5.2 m2 depending on material,
Outer screen surface mesh size and feeding
6.5 m2
MULTI SCREEN® MS 4200 3800 2550 10100 Inner screen surface 32 2 13.4 20 - 150 m3/h mobile 15.7 m2 depending on material,
Outer screen surface mesh size and feeding
16.0 m2
MULTI SCREEN® MS 4200 ST 3900 2535 5332 Inner screen surface 32 2 4.5 20 - 150 m3/h stationary 15.7 m2 depending on material,
Outer screen surface mesh size and feeding
16.0 m2
MULTI SCREEN® MS 5200 3800 2550 11100 Inner screen surface 47 2 15.4 20 - 150 m3/h mobile 24.5 m2 depending on material,
Outer screen surface mesh size and feeding
22.0 m2
MULTI SCREEN® MS 5200 ST 3900 2535 6332 Inner screen surface 47 2 5.5 20 - 150 m3/h stationary 24.5 m2 depending on material,
Outer screen surface mesh size and feeding
22.0 m2
MULTI SCREEN® MS 6700 4000 2550 13100 Inner screen surface 63 2 24.4 50 - 180 m3/h mobile 31.6 m2 depending on material,
Outer screen surface mesh size and feeding
31.5 m2
MULTI SCREEN® MS 1600 ST 3900 2535 7832 Inner screen surface 63 2 7.2 50 - 180 m3/h stationary 31.6 m2 depending on material,
Outer screen surface mesh size and feeding
31.5 m2
Max
. feed
parti
cle si
ze [m
m]
No. o
f pos
sible
prod
uct
fracti
ons
Prod
uct p
artic
le siz
e(s) [m
m]
Requ
ired p
ower
[kW
]
250 3 Variable 30
400 3 Variable 15
400 2 Variable 11
400 2 Variable 11
400 2 Variable 11
400 2 Variable 11
250 2 Variable from 1 - 80 4
250 2 Variable from 1 - 80 4
250 3 Variable from 1 - 80 70
250 3 Variable from 1 - 80 7.5
250 3 Variable from 1 - 80 70
250 3 Variable from 1 - 80 11
250 3 Variable from 1 - 80 90
250 3 Variable from 1 - 80 15
Exter
nal h
eight
[mm]
Exter
nal w
idth [
mm]
Exter
nal le
ngth
[mm]
Scre
en su
rface
(bx l
) [m
mxm
m]
Open
area
[m2 ]
No. o
f scr
een d
ecks
Total
weig
ht of
scre
en [t]
Capa
city [
t/h]
Technical specificationsLINEAR MOTIONVIBRATING SCREEN
AMMANN SCHWEIZ AG800 - 3000 500 - 3300 1500 - 9000 500 x 1500 - 3300 x 90000 Depending on 1 - 3 0.5 - 22 1000
Different Types: Classification Screen, Dewateringscreening surface
Screen, Bar Screen, Banana Screen, Stage Screen
AVITEQ VIBRATIONSTECHNIK GMBH800 - 3600 400 - 3300 1000 - 8100 (300 - 900) x (3000 - 7000) Depending on 1 - 3 Up to 20 Up to 1200
mesh size
Linear motion vibrating screen Typ VSO and VSBBINDER + CO AG
1000 - 5000 1000 - 4400 2500 - 11000 1.6 - 36 m2 Depending on 1 - 3 1 - 30 t Up to 2000 (3000)screening surface
DBR FÖRDERTECHNIK GMBH1400 - 1900 1600 - 3300 3000 - 6000 800 x 3000 - 2500 x 6000 1 1.6 - 8.52100 - 2800 1600 - 3300 3000 - 7000 800 x 3000 - 2500 x 7000 2 2.0 - 14
DERRICK CORPORATION2SG48-120W-4 1440 1435 3100 1200 x 3000 Depending on 1 About 2 t Material-
screening surface dependentLinear Motion Screen about 30 - 50 %
2SG48-90W-3 1440 1435 2670 1200 x 2300 Depending on 1 About 1.6 t Material-screening surface dependent
about 30 - 50 %
Stack Sizer 2SG48-60 R Max. 4120 1470 Max. 4780 1200 x 1500/Deck Depending on 1 - 5 Max. 5.1 t Material-1 to 5 piece screening surface dependent
about 30 - 50 %
HAVER & BOECKER, MÜNSTER GERMANYHAVER NIAGARA® 2000 - 3600 1850 - 2900 (2200) 4300 - 7400 (9000) 1000 x 4000 - 2000 x 7000 35 - 60 % 1 - 3 (4) 3.0 - 11 (12) 50 - 190Horizontal screen (1400 x 8000)with twin shaft driveHAVER-NIAGARA® 1050 - 2500 950 - 2200 2300 - 4350 400 x 800 - 1400 x 3500 35 - 60 % 1 - 3 (4) 0.5 - 4.5 30 - 100Horizontal screenwith unbalanced motor driveHAVER-NIAGARA® 2050 - 4500 2750 - 4750 4200 - 8000 1400 x 4000 - 2500 x 7000 35 - 60 % 1 - 3 (4) 4.5 - 20 50 - 2000Horizontal screen with exciter driveHAVER-NIAGARA® 920 - 1700 850 - 2400 1200 - 3800 500 x 700 - 2000 x 2800 35 - 60 % 3 - 11 (15) 0.3 - 5.5 0.05 - 50M-Class mulit-deck screen
HAVER-NIAGARA® 1100 - 2000 1100 - 2150 1800 - 4000 650 x 1500 - 1400 x 3500 35 - 60 % 1 0.4 - 3.8 25 - 250Dewatering screen
HEIN, LEHMANN TRENN- UND FÖRDERTECHNIK GMBH UG-ED/DD 1200 - 3000 900 - 2800 2500 - 8000 600 - 2400 x 2000 - 7000 Depending on Max. 2 1 - 14 Material-dependent
screening surface
ITE GMBH3P2D 1925 1755 2490 1905 x 1253/1840 x 775 Subject to mesh sizes/ 2 About 2 t Subject to screen type,
screening surface solids loading,viscosity and mud type
3PSM 1450 1680 2300 1905 x 1253 Subject to mesh sizes/ 1 About 1.5 t Subject to screen type,screening surface solids loading,
viscosity and mud type
4PSM 1450 1680 3300 2540 x 1253 Subject to mesh sizes/ 1 About 2.5 t Subject to screen type,screening surface solids loading,
viscosity and mud type
K2D 3805 1740 3020 1905 x 1253/1945 x 1230 Subject to mesh sizes/ 2 About 4 t Subject to screen type,screening surface solids loading,
viscosity and mud type
GeoSep 1840 2000 2370 1900 x 750/1950 x 840 Subject to mesh sizes/ 2 1.2 t Subject to screen type,screening surface solids loading,
viscosity and mud type
18
Max
. feed
parti
cle si
ze [m
m]
No. o
f pos
sible
prod
uct
fracti
ons
Prod
uct p
artic
le siz
e(s) [m
m]
Requ
ired p
ower
[kW
]
500 2 - 4 0.5 - 500 2 x 1,4 - 2 x 37
300 Max. 4 Variable Max. 90
1000 4 1 - 300 2.0 - 75
2 x 4 - 2 x 222 x 4 - 2 x 30
6 - 8 2 32 μm - 2 mm 2 x 1.9
6 - 8 2 32 μm - 2 mm 2 x 1.9
About 4 2 74 μm - 2 mm 2 x 1.9Polyurethane
Up to 200 5 Depending on the product 11 - 30
Up to 64 5 Depending on the product 1.8 - 21.2
Up to 200 5 Depending on the product 7.5 - 264
Up to 10 4 - 24 Depending on the product 0.9 - 11.0
Up to 64 2 Depending on the product 1.6 - 15
Material-dependent 3 Material-dependent Up to 45
About 4 4 44 μm - 4 mm 2 x 2.2
About 4 3 44 μm - 4 mm 2 x 2.2
About 4 4 44 μm - 4 mm 2 x 2.2
About 4 4 44 μm - 4 mm 4 x 2.2
About 4 4 44 μm - 4 mm 2 x 1.8
HAVER & BOECKERMachinery Division Münster, Germany
Phone: +49 251 9793-0E-mail: [email protected]
www.haverboecker.com
Systems and Services for■ Screening
■ Washing
■ Pelletizing
EXCELLENCEBEYOND SCREENING
Now with new electrical machine and plant automation services for mineral processing
Technical specificationsLINEAR MOTIONVIBRATING SCREEN
JÖST GMBH + CO. KG 2 unbalance motorsSUE 300 x 600 - 1400 x 4000 0.18 - 5.6 1 0.2 - 2.0 Up to 450
SUZ 300 x 600 - 1400 x 4000 0.36 - 11.2 2 0.3 - 3.0 Up to 450
SUD 300 x 600 - 1400 x 4000 0.54 - 16.8 3 0.4 - 3.8 Up to 450
Exciter driveSRE 1600 x 3000 - 4200 x 10000 4.8 - 42.0 1 2.2 - 25.0 Up to 4000
SRZ 1600 x 3000 - 4200 x 10000 9.6 - 84.0 2 3.0 - 35.0 Up to 4000
SRD 1600 x 3000 - 3500 x 8000 14.4 - 84.0 3 3.8 - 35 Up to 2500
SRV 1600 x 3000 - 3500 x 8000 19.2 - 112.0 4 4.5 - 38.0 Up to 2500
Scalping screenSUG 600 x 1500 - 1400 x 3000 1 - 2 Max. 500
SRG 1200 x 4000 - 4000 x 8000 1 - 2 Max. 5000
MERZ AUFBEREITUNGSTECHNIK GMBH2 unbalance 500 - 1500 400 - 1500 800 - 3500 0.5 - 5.5 m2 0.5 - 5.5 1 - 2 0.25 - 3.5 0.3 - 150.0Motors
METSO Metso MF 1800 x 6100 - 4200 x 8500 Depends on mesh size 1 - 2 8 - 40 5000(multi sloped decks)Metso LH 1800 x 4800 - 3600 x 7300 Depends on mesh size 1 - 2 7 - 30 5000(horizontal decks)Metso KS De-watering screens 600 x 2000 - 2500 x 6000 Depends on mesh size 1 - 2 0.8 - 11 Up to 400
Metso KS Grizzly screens 1000 x 3000 - 2000 x 4000 Depends on mesh size 1 6 - 11.8 Up to 1000
Metso VG Grizzly screens 1300 x 2700 - 2000 x 6000 Depends on mesh size 1 3.8 - 15.4 500 - 1800
Metso DF Free fall screens 1000 x 1200 - 1800 x 2000 Depends on mesh size 3 1 - 4.8 Up to 400
MFL MASCHINENFABRIK LIEZEN UND GIESSEREI GES.M.B.H.800 - 3000 1000 - 4000 3000 - 10000 800 x 2000 - 3000 x 9000 Variable 1 - 2 Up to 20 Up to 1500
RHEWUM GMBHRIUS 2 motors 1850 2300 3800 1800 x 3000 . /. 1 3.0 + 150
Other sizes on 800 800 1200 400 x 900 . /. 1 0.3 + 6request
1850 2450 3800 1950 x 3000 . /. 1 3.5 400
2400 1880 5900 1500 x 6000 . /. 2 5.8 100
ROTEX EUROPERDDS/1 500 - 1500 500 to 1500 1000 to 6000 Max. 1500 x 6000 Max. 9 1 0.5 to 8000 Depends onRDDS/2-3 600 - 1800 500 to 1500 1000 to 6000 Max. 1500 x 5000 Max. 8 2 or 3 0.5 to 8500 applicationRDDF 500, 1000 500 to 2000 1000 to 7000 Max. 2000 x 6000 12 m2 (feeder) n. a. 0.3 to 6000 max. 1000 t/h
RUBBLE MASTER HMH GMBHPre-screenVS60 2530 2000 2910 Above: 1500 x 1800 Depending on 2 2.5 100
Bottom: 1500 x 1650 screening surface
Post-screenCS2500 2750 2200 7550 2500 x 1000 Depending on 1.2 4 80
screening surface
CS3600/2 2270 2480 7640 2 x 3000 x 1200 Depending on 2 6.3 150screening surface
Oversize grainseparator 1510 1120 2600 3 x 1000 x 400 Depending on 1 0.7 120OS 80, OS 80 EC screening surface
OS 100, OS100 EC 1750 2270 3740 4 x 1150 x 400 Depending on 1 1.1 170screening surface
20
Exter
nal h
eight
[mm]
Exter
nal w
idth [
mm]
Exter
nal le
ngth
[mm]
Scre
en su
rface
(bx l
) [m
mxm
m]
Open
area
[m2 ]
No. o
f scr
een d
ecks
Total
weig
ht of
scre
en [t]
Capa
city [
t/h]
Up to 200 2 0.5 - 150 2 x 0.4 - 2 x 3.0
Up to 200 3 0.5 - 150 2 x 0.6 - 2 x 6.0
Up to 200 4 0.5 - 150 2 x 0.8 - 2 x 9.5
Up to 300 2 0.5 - 150 7.5 - 5.5
Up to 300 3 0.5 - 150 7.5 - 75
Up to 300 4 0.5 - 150 11 - 75
Up to 300 5 0.5 - 150 11 - 90
Up to 500 2 4 - 250 2 - 14
Up to 1000 2 4 - 250 15 - 90
200 4 0.5 - 100.0 1.2 - 15.0
Up to 600 3 1 - 100 30 - 90
Up to 300 3 1 - 100 30 - 90
Up to 200 3 2 - 150 15 - 44
Up to 1500 2 60 - 300 15 - 44
Up tp 1500 1 5 - 200 15 - 30
Up to 250 3 2 - 150 4 - 37
Up to 1000 3 variable up to 45
4 2 3.0 10.2
10 2 10.0 0.9
3.0 2 2.5 9.0
8.0 3 0 - 8.0 9.0
100 2 Depends on application Up to 11100 4 Depends on application Up to 11300 n. a. Depends on application Up to 11
500 2 20 - 75 2
100 2.3 4 - 40 6
100 3 4 - 40 14
100 2 16 - 65 4.5
100 2 16 - 65 10.2
21
Max
. feed
parti
cle si
ze [m
m]
No. o
f pos
sible
prod
uct
fracti
ons
Prod
uct p
artic
le siz
e(s) [m
m]
Requ
ired p
ower
[kW
]
BINDER + CO AGGrazer Str. 19-25A-8200 GleisdorfTel.: +43 / 3112 / 800 0Fax: +43 / 3112 / 800 [email protected]
DBR FÖRDERTECHNIK GMBHKloppenheimer Str. 125D-68239 MannheimTel.: +49 / 6 21 / 4 82 26-0Fax: +49 / 6 21 / 4 82 [email protected]
DERRICK CORPORATION590 Duke Road Buffalo, New York 14225, USATel.: +1 / 716 / 683 - 90 10Fax: +1 / 716 / 683 - 49 [email protected]
FREI FÖRDERTECHNIK AGSchwarzbachstraße 26 CH-3113 RubigenTel.: +41 / 31 / 720 56 56Fax: +41 / 31 / 720 56 [email protected]
FRITSCH GMBHMILLING AND SIZINGIndustriestrasse 8D-55743 Idar-ObersteinTel.: +49 / 67 84 / 70 0Fax: +49 / 67 84 / 70 [email protected]
22
Technical specificationsLINEAR MOTIONVIBRATING SCREEN
Exter
nal h
eight
[mm]
Exter
nal w
idth [
mm]
Exter
nal le
ngth
[mm]
Scre
en su
rface
(bx l
) [m
mxm
m]
Open
area
[m2 ]
No. o
f scr
een d
ecks
Total
weig
ht of
scre
en [t]
Capa
city [
t/h]
SANDVIK
LINEL FLO, LF 1210 - 2555 1020 - 3020 3000 - 7000 Depends on model 3.0 - 21.0 1 - 3 1.99 - 15.65
QE 340 (E-7) 4250 12960 14410 4200 x 1430 7 2 29 Material dependentin operational position
QE 330 (640) 4300 14300 13400 3650 x 1500 6 2 29 Material dependentin operational position
QE 140 (Robotrac) 3200 2730 11620 3660 x 2440 5 1 19.5 Material dependentin operational position
SCHENCK PROCESS GMBHLina Class® 1100 - 4300 1500 - 4800 3500 - 11000 800 x 3000 - 4000 x 10000 2.4 - 40.0 1, 2, 3 1.5 - 60.0 Material dependent
Up to 10000 t/h
SCREENING TECHNOLOGY CONSULTINGSingle-deck screen 1830 - 2830 1900 - 3700 3600 - 9000 (1300 x 1300) - (3100 x 8400) 3.9 - 26 1 3.0 - 17.2 180 - 1190
Double-deck screen 3200- 4800 2300- 3700 5600 - 8600 (1800 x 5000) - (3100 x 8000) 18.0 - 49.6 2 8.5 - 20.0 410 - 1140
SIEBTECHNIK GMBH1000 - 6000 2000 - 12000 800 x 5500 - Depending on Up to 3 Up to ca. 35 Depending on
1900 x 11000 screening surface application requirements
SPALECK GMBH & CO. KGSEL/SER 500 - 2500 600 - 3500 1200 - 8000 400 x 1000 - 2800 x 7000 0.3 - 18 1 Up to 7 Up to approx. 700
SZL/SZR 500 - 2500 600 - 3500 1200 - 8000 400 x 1000 - 2900 x 7000 0.6 - 36 2 Up to approx. 25 Up to approx. 700
SDL/SDR 800 - 2500 1000 - 3500 1500 - 8000 600 x 1500 - 2500 x 6000 2.5 - 43 3 Up to approx. 35 Up to approx. 800
THYSSENKRUPP FÖRDERTECHNIK GMBHDU ED 1200 - 4000 3000 - 10000 1200 x 3000 - 4000 x 10000 1.8 - 20 1 2 - 70 40 - 10000
DU DD 1400 - 4000 3000 - 10000 1400 x 3000 - 4000 x 10000 4.2 - 40 2 4 - 70 40 - 10000
DU 3D 1400 - 3000 3000 - 8000 1400 x 3000 - 3000 x 8000 2.1 - 12 3 6 - 40 40 - 10000
WIMA WILSDRUFFER MASCHINEN- UND ANLAGENBAU GMBH900 x 2000 - 3000 x 8000 1 ca. 0.95 - 12.5
1200 x 4000 - 3000 x 8000 2 ca. 3.6 - 16.9
GKM SIEBTECHNIK GMBHFelix Wankel Str. 11D-74915 WaibstadtTel.: +49 / 72 63 / 4 09 72-0Fax: +49 / 72 63 / 4 09 72-29
HAVER & BOECKER OHGMachinery Division MünsterRobert-Bosch-Straße 6D-48153 Münster – GermanyTel.: +49 / 251 / 97 93-0Fax: +49 / 251 / 97 93-1 [email protected]
HEIN, LEHMANN TRENN- UND FÖRDERTECHNIK GMBHAlte Untergath 40D-47805 KrefeldTel.: +49 / 21 51 / 375-5Fax: +49 / 21 51 / [email protected]
23
Max
. feed
parti
cle si
ze [m
m]
No. o
f pos
sible
prod
uct
fracti
ons
Prod
uct p
artic
le siz
e(s) [m
m]
Requ
ired p
ower
[kW
] ISENMANN SIEBE GMBHGerwigstraße 67 D-76131 KarlsruheTel.: +49 / 721 / 6 29 00Fax: +49 / 721 / 62 90 [email protected]
ITE GMBHKonrad-Zuse-Straße 22D-52477 AlsdorfTel.: +49 / 24 04 / 67 258-0Fax: +49 / 24 04 / 67 [email protected]
JÖST GMBH + CO. KGGewerbestr. 28–32 D-48249 DülmenTel.: +49 / 25 90 / 98-0Fax: +49 / 25 90 / 98-1 [email protected]
JÜRGEN KÖLSCH GMBHWildspitzstr. 2D-87751 HeimertingenTel.: +49 / 83 35 / 9 89 50Fax: +49 / 83 35 / 98 95 [email protected]
KARL WILHELM BAUMMaschinen für Sand und KiesWeisstannenweg 16D-79874 BreitnauTel.: +49 / 89 / 41 31 07 12Fax: +49 / 89 / 41 31 07 [email protected]
SCHWINGUNGSTECHNIK
300 2 - 4 100 - 1 2 x 2.55 - 2 x 30
Material dependent 3 Material dependent 74.9 kW/2200 rpm
Material dependent 3 Material dependent 75 kW/2200 rpm
Material dependent 2 Material dependent 74.9 kW/2200 rpm
1500 4 0.5 - 1500 4.0 - 150.0
300 - 500 2 0.5 - 100 7.5 - 55.0
300 - 500 3 0.5 - 100 22.0 - 55.0
Depending on Max. 4 Depending on Up to 75application requirements application requirements
Up to ca. 600 2 - 3 0 - 150 Up to 22
Up to 600 3 - 4 0 - 150 Up to 30
Up to 600 4 - 6 0 - 150 Up to 45
1500 1 - 2 2 - 500 5.5 - 200
1500 2 - 3 2 - 500 7..5 - 200
1500 3 - 4 2 - 500 11 - 200
2 x 2.0 - 2 x 18.5
2 x 4.0 - 2 x 30.0
HENSEN QUARRY EQUIPMENT J.G.M.N.’t Winkel 17aNL-6027 NT SoerendonkTel.: +31 / 4 95 / 59 23 88Fax: +31 / 4 95 / 59 23 [email protected]
24
Exter
nal h
eight
[mm]
Exter
nal w
idth [
mm]
Exter
nal le
ngth
[mm]
Scre
en su
rface
(bx l
) [m
mxm
m]
Open
area
[m2 ]
No. o
f scr
een d
ecks
Total
weig
ht of
scre
en [t]
Capa
city [
t/h]
ELLIPTICAL MOTIONVIBRATING SCREEN
Technical specifications
AMMANN SCHWEIZ AG800 - 2500 800 - 2700 1500 - 8000 900 x 1500 - 2700 x 8000 Depending on 1 - 3 0.75 - 18 Up to 1000
screening surface
AVITEQ VIBRATIONSTECHNIK GMBHType VSL 2000 - 2500 1200 - 2700 2200 - 7200 1000 x 2500 - 2000 x 7000 Depending on 1 - 3 Up to 10 Up to 800
screening surface
BINDER + CO AGBivitec 1000 - 5000 1200 - 3800 3500 - 11000 1.5 - 36 m2 Depending on 1 - 4 1.5 - 25 Up to 1000
screening surface
DBR FÖRDERTECHNIK GMBH1400 - 1900 2000 - 3300 5000 - 7000 1200 x 5000 - 2500 x 7000 1 4 - 8.5
1500 - 2000 2000 - 3300 5000 - 8000 1200 x 5000 - 2500 x 8000 2 6 - 16.8
1500 - 2000 2000 - 3300 5000 - 8000 1200 x 5000 - 2500 x 8000 2.5 6.5 - 17.5
JÖST GMBHElliptical motionvibrating screenSWEE 1000 x 5000 - 2400 x 5000 5.0 - 12.0 1 2.3 - 4.6 Up to 950
SUEE 1000 x 4000 - 1400 x 5000 4.0 - 7.0 1 2.0 - 3.0 Up to 560
SUZE 1000 x 4000 - 1400 x 5000 8.0 - 14.0 2 3.0 - 4..5 Up to 560
METSO Metso TS screens 1500 x 5000 - 3000 x 8300 Depends on 2 - 3 5 - 20 Up to 900
mesh size
Metso FS screens 1831 x 4900 - 2547 x 8100 Depends on 2 - 3 6.5 - 17 Up to 800mesh size
RHEWUM GMBH RIUS 1 motor 1650 1300 2075 1000 x 2000 1 0.75 20
Other sizes on 1650 1500 2075 1200 x 2000 1 0.9 250request
1650 1300 2075 1000 x 2000 1 0.75 190
1150 900 1450 600 x 1200 1 0.3 20
SANDVIKMECHANISM GRIZZLY SCREEN SG 1220 - 2420 3000 - 4800 Depends on model 2.2 - 8.6 1 - 2 3500 - 10500
SCHENCK PROCESS GMBH VarioClass 1200 - 1900 2700 - 3300 5690 - 7790 1900 x 5000 - 2500 x 7000 9.5 - 17.5 1, 2 5.3 - 15.2 Material-dependent
SIEBTECHNIK GMBH Ca. 2500 Ca. 7500 2100 x 7100 Depending on 2 ca. 10 Depending on application
screening surface requirements
SWECO EUROPE 1700 2000 3900 900 x 1200 3.7 Max. 2 2 Up to 100
THYSSENKRUPP FÖRDERTECHNIK GMBH ED 1000 - 2500 3000 - 8000 1000 x 3000 - 2500 x 8000 1.5 - 10 1 2 - 9 40 - 2000
DD 1000 - 2500 3000 - 8000 1000 x 3000 - 2500 x 8000 3 – 20 2 4 - 11 40 - 2000
WIMA WILSDRUFFER MASCHINEN- UND ANLAGENBAU GMBH1200 x 4000 - 3000 x 8000 1 ca. 1.9 - 10.5
1200 x 4000 - 3000 x 8000 2 ca. 3.2 - 18.5
1200 x 4000 - 3000 x 8000 3 ca. 4.1 - 25.9
25
Max
. feed
parti
cle si
ze [m
m]
No. o
f pos
sible
prod
uct
fracti
ons
Prod
uct p
artic
le siz
e(s) [m
m]
Requ
ired p
ower
[kW
]
250 2 - 4 0.1 - 250 7.5 - 45
300 Max. 45
Up to 250 5 0.3 - 120 5.5 - 55
15 - 30
22 - 45
22 - 45
Up to 500 2 0.5 - 50 11 - 18.5
Up to 300 2 0.5 - 50 2 x 3.0 - 2 x 4.0
Up to 300 3 0.5 - 50 2 x 6.0 - 2 x 9.5
Up to 120 4 0.5 - 50 15 - 30
Up to 120 4 0.5 - 50 30 - 55
1.6 2 1.6 1.9
22 2 8 4.5
60 2 22 1.2
10 2 6 0.7
900 - 1500 2 - 3 250 - 90 2 x 7.5 - 2 x 18.5
63 3 0.5 - 63 15.0 - 45.0
Depending on application 3 Depending on application 22, 7.5requirements requirements
20 3 0.5 - 4.0 4
1200 1 - 2 2 - 500 7.5 - 45
1000 2 - 3 2 - 500 11 - 55
11.0 - 45.0
11.0 - 90.0
15.0 - 132.0
F.B. LEHMENN MASCHINENFABRIK GMBHDaimlerstraße 12D-73431 AalenTel.: +49 / 7361 / 562 0Fax: +49 / 7361 / 562 [email protected]
MERZ AUFBEREITUNGSTECHNIK GMBHIndustriestraße 29D-79787 LauchringenTel.: +49 / 77 41 / 68 26-0Fax: +49 / 77 41 / 68 26-99info@merz-aufbereitungstechnik.dewww.merz-aufbereitungstechnik.de
METSO MINERALS (DEUTSCHLAND) GMBHObere Riedstr. 111-115D-68309 MannheimTel.: +49 / 621 / 7 27 00 0Fax: +49 / 621 / 7 27 00 [email protected]
MASCHINENFABRIK LIEZENUND GIESSEREI GES. M.B.H.Werkstraße 5 A-8940 LiezenTel.: +43 / 36 12 / 270 300Fax: +43 / 36 12 / 270 207
MINOX SIEBTECHNIK GMBHInterpark 8D-76877 Offenbach/QueichTel.: +49 / 63 48 / 9 82 80Fax: +49 / 63 48 / 40 [email protected]
Exter
nal h
eight
[mm]
Exter
nal w
idth [
mm]
Exter
nal le
ngth
[mm]
Scre
en su
rface
(bx l
) [m
mxm
m]
Open
area
[m2 ]
No. o
f scr
een d
ecks
Total
weig
ht of
scre
en [t]
Capa
city [
t/h]
TUMBLER SCREENGIRATORY SCREEN
Technical specifications
ALLGAIER WERKE GMBH 760 - 2500 600 - 2900 0.28 - 6.4 m2/Deck Depending on 1 - 6 0.150 - 2.2 0.02 - 40
Screen diameter mesh size Depending on the product
AVITEQ VIBRATIONSTECHNIK GMBH Type VSRD 900 - 2240 600 - 1800 0.28 - 2.5 m2/Deck Depends on 1 - 6 0.32 - 1.0 Up to 15
Screen diameter mesh size
GKM SIEBTECHNIK GMBH 750 - 2200 600 - 2600 0.3 - 5.3 m2/Deck 1 - 5 300 - 3000 kg 50 - 40000 kg
ROTEX EUROPERotex Gyratory/
Linear motionRotex 10“s 500 - 1000 500 1000 0.5 Up to 4 0.2Rotex 30“s 500 - 1000 1000 - 1500 1000 - 3000 1 to 3 Up to 5 Max. 0.8Rotex 80“s 600 - 1200 1000 - 1500 2000 - 3000 2 to 5 Up to 5 Max. 2Rotex 50“s 800 - 1500 1000 - 2000 2000 - 4000 3 to 6 Up to 5 Max. 4Rotex 70“s 1000 - 2000 1500 - 2000 3000 - 5000 4 to 12 Up to 4 Max. 7 Depending on application
Apex 3 600 - 1500 1500 - 1000 1000 - 2500 0.8 - 2 Up to 4 Max. 6 from 1 to 500 t/h
Apex 8 800 - 2000 1000 - 1500 2500 - 4000 2 - 3.25 Up to 4 Max. 6 Apex 5 1000 - 2000 1000 - 2000 3000 - 6000 3.25 - 6 Up to 4 Max. 6 Apex 7 1200 - 2000 1500 - 2000 4000 - 8000 4 - 10 Up to 4 Max. 6
MS 2000 - 3500 1500 - 3000 3000 - 4500 8 to 33 Up to 3 Max. 9 From 20 to 800 t/hMegatex 2500 - 3500 2500 - 3000 3000 - 4500 17 to 33 Up to 2 Max. 12 From 100 to 1000 t/h
SIEBTECHNIK GMBH Max. 1800 Max. 2.5 m2 Depending on Max. 3 0.6 Depending on application
screening surface requirements
Max
. feed
parti
cle si
ze [m
m]
No. o
f pos
sible
prod
uct
fracti
ons
Prod
uct p
artic
le siz
e(s) [m
m]
Requ
ired p
ower
[kW
]
Ca. 10 max. 7 Ultrafine 0.25 - 5.5up to 10 mm
Depending on application Max. 3and customer request
10 Max. 7 0 - 10 0.25 - 5.5
50 5 0.3750 6 1.550 6 2.250 6 5.550 5 Depending on application 7.550 5 and upon customer request 1.550 5 450 5 5.550 5 7.5
50 4 1150 3 15
Depending on application 4 Depending on application ca. 2requirements requirements
MOGENSEN GMBH & CO. KGKronskamp 126 D-22880 WedelTel.: +49 / 41 03 / 80 42-0Fax: +49 / 41 03 / 80 [email protected]
OF MIETPARK GMBH & CO. KGCarl-Zeiss-Straße 10D-25451 QuickbornTel.: +49 / 41 06 / 77 82-23Fax: +49 / 41 06 / 77 [email protected]
OLI VIBRATIONSTECHNIK GMBHNeesbacher Str. 25 D-65597 Hünfelden Tel.: +49 / 64 38 / 83 54-0Fax: +49 / 64 38 / 83 54 [email protected]
bivitecwe process the future
Screening has never been easier
BIVITEC sets new standards in the processing of difficult to screen
materials. A dual vibration principle from a single drive and dynamically
activated screen mats guarantee most accurate cut points even for
problematic bulk materials.
Screening technology ingeniously simple.
Binder+Co, Processing Technologie
A-8200 Gleisdorf, Grazer Straße 19-25, Austria
Phone: +43/3112 800-0, Fax: +43/3112-800-300
[email protected], www.binder-co.com
28
Exter
nal h
eight
[mm]
Exter
nal w
idth [
mm]
Exter
nal le
ngth
[mm]
Scre
en su
rface
(bxl
) [m
mxmm
]
Open
area
[m2 ]
No. o
f scr
een d
ecks
Total
weig
ht of
scre
en [t]
Capa
city [
t/h]
Technical specificationsOTHERS
AVITEQ VIBRATIONSTECHNIK GMBHDraining screen (300 - 900) x Depending onType VSW 800 - 2500 400 - 2600 1000 - 4350 (2150 x 4000) mesh size 1 Up to 6 Up to 1200
BACKERS MASCHINENBAU GMBH2-ha 2680 5450 - 2500 9200 - 6800 4800 x 1200 2.5 m3 1 9 1202-hta 2680 5450 - 2500 9200 - 6800 4800 x 1200 2.5 m3 1 11 1202-ma 3950 - 3870 5770 - 2500 14160 - 12800 6700 x 1200 5 m3 1 18 2002-ma17 3950 - 3870 4890 - 3000 15900 - 14430 6700 x 1200 5 m3 1 20 2002-sa 3800 - 3000 5770 - 2550 14160 - 12830 8100 x 1200 5 m3 1 15 2002-ta 3950 - 3360 5770 - 2550 14300 - 12830 6700 - 1200 5 m3 1 18 2003-ma 4000 5760 - 2550 16220 - 14720 3200 x 1200 - 6700 x 1200 5 m3 2 20 2003-mal 4000 5760 - 2550 18120 - 16620 5100 x 1200 - 6700 x 1200 5 m3 2 25 2003-mta 4000 5760 - 2550 16220 - 14720 3200 x 1200 - 6700 x 1200 5 m3 2 30 2003-mta17 4000 6100 - 3000 18150 - 16800 3200 x 1200 - 8100 x 1200 5 m3 2 30 3003-mtal 4000 5760 - 2550 18120 - 16620 5100 x 1200 - 6700 x 1200 5 m3 2 30 2003-ta17 4000 7350 - 3650 17830 - 17600 3200 x 1700 - 8100 x 1800 5 m3 2 25 3003-mb 4000 5390 - 2550 13660 3200 x 1200 - 6700 x 1200 5 m3 2 20 2003-mbl 4000 5390 - 2550 15520 5100 x 1200 - 6700 x 1200 5 m3 2 25 2003-mtb 4000 5390 - 2550 13660 3200 x 1200 - 6700 x 1200 5 m3 2 30 2003-mtb17 4000 6830 - 3000 16530 3200 x 1700 - 6700 x 1800 5 m3 2 30 3003-mtbl 4000 5390 - 2550 15520 5100 x 1200 - 6700 x 1200 5 m3 2 30 2003-mtbc 4000 5390 - 2550 13660 3200 x 1200 - 6700 x 1200 5 m3 2 30 2003-sb 3800 - 3000 5760 - 2550 16220 - 14720 3201 x 1200 - 6700 x 1200 5 m3 2 15 2003-tb 4000 5390 - 2550 13660 3202 x 1200 - 6700 x 1200 5 m3 2 25 2003-tbl 4000 5390 - 2550 15520 3203 x 1200 - 6700 x 1200 5 m3 2 25 200
BINDER + CO AGBIVITEC 1000 - 5000 1200 - 3800 3500 - 11000 1.5 - 36 m2 Depending on 1 - 3 1.5 - 25 Up to 1000Resonance 800 - 2000 1450 - 2750 2500 - 10900 2 - 20 m2 screening surface 2 1.5 - 17 Up to 400screening machines
HAVER & BOECKER, MÜNSTER GERMANYHAVER Fine-Line 3200 - 5350 1800 - 4200 3100 - 5800 1000 x 2500 - 3000 x 3750 35 - 60 % 1 - 2 2.0 - 11.8 1.2 - 180Featuring – directlyexcited screen clothlarge-sized 5800 5700 11500 4000 x 10500 K. A. K. A. 115 Up to 10000
HAVER-NIAGARA® exciter screen for oil-sand processing andspecial applicationsHEIN, LEHMANN TRENN- UND FÖRDERTECHNIK GMBH
Spannwell® screenType Liwell® 700 - 1800 1400 - 4100 3800 - 10000 1000 - 3000 x 2500 - 8800 Depending on Max. 2 2 - 19 Material-dependent
screening surface
Spannwell® screenType Liwell®-KT 1500 - 2000 1300 - 2900 4000 - 9000 1000 - 2200 x 3000 x 8000 Depending on Max. 2 3.5 - 14 Material-dependent
screening surface
JÖST GMBH & CO. KGFlip-flow screenType TrampolineSUES 800 x 2700 - 1200 x 4000 2.16 - 4.8 1 2.0 - 3.1 Up to 150
SWES 1400 x 4600 - 2400 x 7900 6.4 - 19.0 1 2.8 - 8.2 Up to 900
Fine screen with directly vibrated screening surfacemagn. SMEF 1100 x 1500 - 1700 x 3500 1.65 - 6.0 1 1.1 - 2.4 Up to 125
SMZF 1100 x 1500 - 1700 x 3500 3.3 - 12.0 2 1.3 - 3.5 Up to 125
dyn. SUEF 1100 x 1500 - 1700 x 3500 1.65 - 6.0 1 1.1 - 2.4 Up to 125
SUZF 1100 x 1500 - 1700 x 3500 3.3 - 12.0 2 1.3 - 3.5 Up to 125
Self-cleaning bar screenType Grecco
SVEG 800 x 2500 2.0 1 1.1 Up to 60
SWEG 800 x 4000 - 2400 x 7000 3.2 - 16.8 1 1.7 - 8.8 Up to 500
Metering screen with electro magnetic vibrators
SDE 180 x 500 - 240 x 750 0.075 - 0.255 1 0.035 - 0.110 Up to 1.5
SDZ 180 x 500 - 340 x 750 0.15 - 0.51 2 0.050 - 0.160 Up to 1..5
29
Max
. feed
parti
cle si
ze [m
m]
No. o
f pos
sible
prod
uct
fracti
ons
Prod
uct p
artic
le siz
e(s) [m
m]
Requ
ired p
ower
[kW
]
150 Max. 2 Variable Max. 20
300 2 74.5300 2 74.5300 2 130300 2 130300 2 130300 2 130300 3 168300 3 168300 3 168300 3 168300 3 168300 3 168300 3 168300 3 168300 3 168300 3 168300 3 168300 3 168300 3 168300 3 168300 3 168
Up to 250 5 0.3 - 120 5.5 - 55200 5 0.5 - 100 4 - 30
Up to 20 2 - 3 Depending on the product 1.8 - 10.8
Up to 900 K. A. Depending on the product 264
Material-dependent 3 Material-dependent Up to 55
Material-dependent 3 Material-dependent Up to 37
Up to 100 mm 2 2 - 50 2 x 2.5 - 2 x 3.6
Up to 100 mm 2 2 - 50 5.5 - 22.0
Up to 100 mm 2 0.2 - 7 2.4 - 6.4 KVA
Up to 100 mm 3 0.2 - 7 4.8 - 12.8 KVA
Up to 100 mm 2 0.2 - 7 0.4 - 1.2
Up to 100 mm 3 0.2 - 7 0.8 - 2.4
Up to 200 mm 2 2 - 8 3.0
Up to 200 mm 2 2 - 8 5.5 - 30
Up to 50 mm 2 0.5 - 15 0.07 - 0.14
Up to 50 mm 3 0.5 - 15 0.14 - 0.21
OPPERMANN & FUSS GMBHCarl-Zeiss-Straße 10D-25451 QuickbornTel.: +49 / 41 06 / 77 82-0Fax: +49 / 41 06 / 77 [email protected]
RETSCH GMBHRheinische Straße 36D-42781 HaanTel.: +49 / 21 29 / 55 61-0Fax: +49 / 21 29 / 87 [email protected]
RHEWUM GMBHRosentalstr. 24D-42899 RemscheidTel.: +49 / 21 91 / 57 67-0Fax: +49 / 21 91 / 57 [email protected]
ROCKSTER RECYCLERWirtschaftszeile West 2A-4482 EnnsdorfTel.: +43 / 72 23 / 8 10 00Fax: +43 / 72 23 / 8 10 00-3 [email protected]
ROTEXBerghauserstr. 62D-42859 Remscheid Tel.: +49 / 21 91 / 890 625Fax: +49 / 21 91 / 890 [email protected]
Depe
nding
on th
e mate
rial
30
Exter
nal h
eight
[mm]
Exter
nal w
idth [
mm]
Exter
nal le
ngth
[mm]
Scre
en su
rface
(bxl
) [m
mxmm
]
Open
area
[m2 ]
No. o
f scr
een d
ecks
Total
weig
ht of
scre
en [t]
Capa
city [
t/h]
Technical specificationsOTHERS
MERZ AUFBEREITUNGSTECHNIK GMBH1 unbalance motor 500 - 1500 400 - 1200 800 - 2000 0.5 - 2.4 m2 0.5 - 2.4 1 - 2 0.3 - 2.5 0.3 - 40.0
METSO TY-Hummer 914 - 1219 1524 - 6096 1 - 3 0.916 - 4.559directly vibrated screen
MFL MASCHINENFABRIK LIEZEN UND GIESSEREI GES.M.B.H.Flip Flow-screen 1000 - 2000 1200 - 3500 4000 - 8000 800 x 3,9 - 2400 x 6,5 variable 1/2 1200 - 8500 variable
MOGENSEN
Sizer 2000 2300 - 6000 500 - 2500 2500 - 6500 1.2 - 36 m2 Depending on mesh-size 1 - 3 0.50 - 6 Depending on mesh-size and product
Vibro-Stangensizer 800 - 4000 Working width 1000 - 7000 0.3 - 16 m2 Depending on bar 1 - 12 0.5 - 12 Depending on bar spacing and product500 - 2500 diameter and spacing
Sizer 500 - 3500 Working width 700 - 4000 0.5 - 45 m2 Depending on mesh-size 1 - 6 0.15 - 10 Depending on mesh-size and product500 - 3000
RHEWUM GMBHCloth vibrated screens 4500 4290 4200 3500 x 4500 2 10.5 Depending on cut-point
WA and WAU 4850 2200 6500 1950 x 5380 4 8.5 Depending on cut-point
Other sizes on 2290 2250 1950 1950 x 2250 1 2.0 Depending on cut-pointrequest
3000 4290 4400 3500 x 4500 1 6.5 Depending on cut-point
2960 4600 3450 3900 x 3600 1 5.5 Depending on cut-point
2250 1840 2700 1500 x 2690 1 1.7 Depending on cut-point
5000 1720 3600 1150 x 2250 6 5.3 Depending on cut-point
4200 2000 3900 1750 x 3600 2 5.4 Depending on cut-point
Double frequency screens DF 4000 3000 8000 2500 x 3000 6 22 Depending on cut-point
Other sizes on 3600 2130 3500 1950 x 4000 3 5 Depending on cut-pointrequest
4000 3000 5500 1950 x 4500 3 10.5 Depending on cut-point
4500 2700 3000 1950 x 4000 1 5 Depending on cut-point
5950 3490 6850 2300 x 6000 3 15.0 Depending on cut-point
ROTEX EUROPERotex Gyratory/
Linear motionRotex 10“s 500 - 1000 500 1000 0.5 Up to 4 0.2Rotex 30“s 500 - 1000 1000 - 1500 1000 - 3000 1 to 3 Up to 5 Max. 0.8Rotex 80“s 600 - 1200 1000 - 1500 2000 - 3000 2 to 5 Up to 5 Max. 2Rotex 50“s 800 - 1500 1000 - 2000 2000 - 4000 3 to 6 Up to 5 Max. 4Rotex 70“s 1000 - 2000 1500 - 2000 3000 - 5000 4 to 12 Up to 4 Max. 7 Depending on application
Apex 3 600 - 1500 500 - 1000 1000 - 2500 0.8 - 2 Up to 4 Max. 6 from 1 to 500 t/hApex 8 800 - 2000 1000 - 1500 2500 - 4000 2 - 3.25 Up to 4 Max. 6Apex 5 1000 - 2000 1000 - 2000 3000 - 6000 3.25 - 6 Up to 4 Max. 6Apex 7 1200 - 2000 1500 - 2000 4000 - 8000 4 - 10 Up to 4 Max. 6
MS 2000 - 3500 1500 - 3000 3000 - 4500 8 to 33 Up to 3 Max. 9 From 20 to 800 t/hMegatex 2500 - 3500 2500 - 3000 3000 - 4500 17 to 33 Up to 2 Max. 12 From 100 to 1000 t/h
Rotex Hicline/directly vibrated screen
H 60 - 1/2 20000 - 40000 1250 5000 1200 x 4575 5.6 1/2 1800 - 2300H 80 - 1/2 20000 - 40000 1250 6500 1200 x 6000 7.4 1/2 2400 - 3000H 90 - 1/2 20000 - 40000 2000 5000 1830 x 4575 8.4 1/2 2800 - 3400 Depending on application
H 100 - 1/2 20000 - 40000 1600 6500 1550 x 6000 9.3 1/2 3100 - 3800 up to 500 t/hH 120 - 1/2 20000 - 40000 2000 6500 1830 x 6000 11.1 1/2 3700 - 4600H 150 - 1/2 20000 - 40000 2000 8000 1830 x 7600 14 1/2 4600 - 5700
31
Max
. feed
parti
cle si
ze [m
m]
No. o
f pos
sible
prod
uct
fracti
ons
Prod
uct p
artic
le siz
e(s) [m
m]
Requ
ired p
ower
[kW
]
100 4 0.5 - 100.0 1.2 - 15.0
Up to 19 4 Material-dependent 0.5 - 2
variable 1 - 3 variable up to 30
Ca. 15 Max. 4 0,1 - 10 0.9 - 5.0
1200 Max. 4 10 - 300 2 - 30
Ca. 200 Max. 7 0,2 - 100 0.4 - 30
25 3 6.4 kW
5 5 5.8 kW
0.3 2 0.8 kW
1.0 2 3.2 kW
6.0 2 1.3 kW
5.0 2 0.96 kW
1.5 7 4.8 kW
5.0 3 1.28 kW
30 7 22 kW
10 4 19.4 kW
12 2 10.2 kW
5 2 8.2 kW
20 4
50 5 0.3750 6 1.550 6 2.250 6 5.550 5 Depending on application 7.550 5 and upon customer request 1.550 5 450 5 5.550 5 7.5
50 4 1150 3 15
100 2/3 1 to 20 3 x 1.5100 2/3 1 to 20 4 x 1.5100 2/3 1 to 20 3 x 1.5100 2/3 1 to 20 4 x 1.5100 2/3 1 to 20 4 x 1.5100 2/3 1 to 20 5 x 1.5
RUBBLE MASTER HMH GMBHIm Südpark 196A-4030 Linz/PichlingTel: +43 / 7 32 / 73 7117-360Fax: +43 / 7 32 / 73 [email protected]
SANDVIK MINING AND CONSTRUCTIONCENTRAL EUROPE GMBHHafenstraße 280D-45356 EssenTel.: +49 / 2 01 / 17 85-300Fax: +49 / 2 01 / 17 85 [email protected] www.sandvik.com
SBM MINERAL PROCESSING GMBHArbeiterheimstraße 46A-4663 Laakirchen Tel.: +43 / 76 13 / 27 71-0Fax: +43 / 76 13 / 27 71-359 [email protected]
Schenck Process GmbHPallaswiesenstraße 100D-64293 DarmstadtTel.: +49 / 61 51 / 15 31 10 00Fax: +49 / 61 51 / 15 31 12 [email protected]
SIEBTECHNIK GMBHPlatanenallee 46D-45478 Mülheim/RuhrTel.: +49 / 2 08 / 58 01-00Fax: +49 / 2 08 / 58 01-3 [email protected]
SKAKO COMESSA DEUTSCHLANDPapenbrückstraße 5D-45721 Haltern/WestfalenTel.: +49 / 23 64 / 10 60-37Fax: +49 / 23 64 / 10 [email protected]
Depe
nding
on pr
oduc
t spe
cifica
tion
32
Exter
nal h
eight
[mm]
Exter
nal w
idth [
mm]
Exter
nal le
ngth
[mm]
Scre
en su
rface
(bxl
) [m
mxmm
]
Open
area
[m2 ]
No. o
f scr
een d
ecks
Total
weig
ht of
scre
en [t]
Capa
city [
t/h]
OTHERS Technical specifications
SANDVIKFREE-FLO FF 1450 - 2025 1020 - 1818 1330 - 2654 Depends on model 2 - 3 1.00 - 4.45
FREE-CLASSIFIER SF 1400 - 1800 3540 - 6500 Depends on model 3 - 4 3.8 - 6.7
ROLLER GRIZZLY SR TYP P 1000 1200 - 2400 2000 - 6000 Depends on model 7.2 - 28.5
ROLLER SCREEN SR with casting segments 1000 1200 - 2400 2500 - 7000 Depends on model 5.2 - 16with spiral rollers 1000 1000 - 2000 2500 - 6000 4 - 11.2
for soft commercial coal 1000 1200 - 2400 2500 - 6500 3.2 - 13.1
ROLLER SCREEN CRUSHER RS 2400 1000 - 2000 2500 - 6000 Depends on model 8 - 16.7
SBM MINERAL PROCESSING GMBH
SBM – prescreenswith grids or perforated plates onthe upper deck, screens or fingerscreens on the lower deck
SBM – roller bar and star screen Depending Depending Depending Width: 800 to 1500 mm Depending 1 Deck/ Depending Dependingon requirements on requirements on requirements Length: 1000 to 4000 mm on requirements Multiple on requirements on requirements
cutsrunningin a row
SCREENING TECHNOLOGY CONSULTINGMulti-deck sizer 3000 - 3700 1600 - 3600 ca. 3400 - ca. 3800 (1000 x 2400) - (3000 x 2400) 7.2 - 36 3 or 5 2.5 - 8.6 500 - 1500
SIEBTECHNIK GMBH
Multi-deck screen - 2000 - 25000 Up to 5 x 5 m2 Depending on Up to 5 Ca. 5 Depending on Depending onscreening surface application application requirements
requirementsAsphalt screen - 3000 - 7000 Up to 2400 x 6000 Depending on Up to 6 ca. 12 Depending on
screening surface application requirementsSPALECK GMBH + CO. KG
Flip-Flow screen 1200 - 4000 800 - 2800 3000 - 8000 2400 - 1600 Depending on 1 - 3 1.8 - 18 Material-dependentSEWS screening surface
Grecco SELU 1200 - 4000 1200 - 2400 1000 - 2500 300 - 600 Depending on 1 2.2 - 4 Depending onbar diameter bar spacing
Dosing screen with electro magnetic 50 x 300 - 300 x 1200 0.015 - 0.36 2 0.020 - 0.220 Up to 1.5vibrators SFDUSWECO EUROPE
Multi motion rectangularseparator MM4-PT 1270 1700 2900 2.6 2.4 1 2.5 Up to 100Gyra Max 1200 - 3200 1900 - 2700 1600 - 4700 600 x 1200 - 2000 x 4000 0.5 - 6.1 1 - 5 0.5 - 6 Depending on cut point
SPALECK GMBH + CO KGRobert-Bosch-Str. 15 D-46397 BocholtTel.: +49 / 28 71 / 21 34-0Fax: +49 / 28 71 / 21 [email protected]/f-s
Depe
nding
on m
achin
e typ
e
Depe
nding
on m
achin
e typ
e
Depe
nding
on m
achin
e typ
e
800 x
1500
- 240
0 x 50
00
1.2 - 1
2 m2 /D
eck
1; 2;
Depe
nding
on ap
plica
tion r
equir
emen
ts
Depe
nding
on th
e num
ber o
f cuts
,
type o
f scr
een s
urfac
e and
scre
en lo
ad
Indivi
dual
desig
n bas
ed on
the g
radin
g cu
rve of
feed
mate
rial,
mater
ial pr
oper
ties a
nd re
quire
d sep
arati
on
(up to
2000
t/h)
STAPPERT SPEZIAL-STAHL HANDEL GMBHABRASERVICERonsdorfer Str. 24D-40233 DüsseldorfTel.: +49 / 211 / 9 95 50 0Fax: +49 / 211 / 9 95 50 [email protected]
SCREENING TECHNOLOGY CONSULTINGPinnaubogen 66 D-25482 AppenTel.: +49 / 41 01 / 2 34 34Fax: +49 / 41 01 / 20 08 [email protected]
33
Max
. feed
parti
cle si
ze [m
m]
No. o
f pos
sible
prod
uct
fracti
ons
Prod
uct p
artic
le siz
e(s) [m
m]
Requ
ired p
ower
[kW
]
120 - 350 3 - 4 2 x 2.3 - 2 x 6.6
120 4 - 5 2 x 6.6 - 2 x 10.8
1.5 m3 180 - 50 22
1 m3 80 - 20 7.51 m3 80 - 20 7.5
0.3 m3 20 - 3 4
60 - 146.5
Depending Depending Sizing at Shaft driveon requirements on app. 30 –100 mm single or
requirements collectivepossible
100 4 or 6 0.1 - 80 7.0 - 17.5
6 Up to 10 kW
Depending on 7 Depending on 2 x 11feed material application requirements
Material-dependent 4 Up to 150 3 - 37.5
Up to 200 2 Depending on product 8 - 18
Up to 50 3 Depending on product 0.3 - 4
20 2 0.063 - 5 450 - 100 2 - 6 0.1 - 100 1 - 10
2-3 D
epen
ding o
n app
licati
on rr
equir
emen
ts
Depe
nding
on th
e mac
hine d
esign
(up to
max
. 200
0 mm
edge
leng
th)
Sizing
on th
e upp
er de
ck: 4
0 to 1
50 m
m
Depe
nding
on m
achin
e typ
e and
mate
rial
SWECO EUROPE SARue de la Recherche 8B-1400 NivellesTel.: +32 / 67 89 34 34Fax: +32 / 67 89 34 [email protected]
THYSSENKRUPP FÖRDERTECHNIK GMBHSchleebergstr. 12D-59320 EnnigerlohTel.: +49 / 25 24 / 3 00Fax: +49 / 25 24 / 22 52 [email protected]
WIMAWILSDRUFFER MASCHINEN- UNDANLAGENBAU GMBHFreiberger Straße 79 D-01723 WilsdruffTel.: +49 / 3 52 04 / 6 59-0Fax: +49 / 3 52 04 / 4 06 [email protected]
ZEMMLER SiebanlagenWoschkower Weg 25D-01983 GroßräschenTel.: +49 / 3 57 53 / 2 65 66Fax: +49 / 3 57 53 / 2 65 [email protected]
Screening surfaces
AMMANN SCHWEIZ AGEisenbahnstr. 25CH-4901 LangenthalTel.: +41 / 62 / 916 64 64Fax: +41 / 62 / 916 64 [email protected]
APEX-LIEBEN GMBH CRUSH & SCREENTECLeopold-Hoesch-Str. 1D-52511 GeilenkirchenTel.: +49 / 24 51 / 4 09 58 84Fax: +49 / 24 51 / 4 09 58 [email protected]
Exter
nal h
eight
[mm]
Exter
nal w
idth [
mm]
Exter
nal le
ngth
[mm]
Scre
en su
rface
(bxl
) [m
mxmm
]
Open
area
[m2 ]
No. o
f scr
een d
ecks
Total
weig
ht of
scre
en [t]
Capa
city [
t/h]
OTHERS Technical specifications
THYSSENKRUPP FÖRDERTECHNIK GMBHUltrafine screen
Screener 2041 1500 2300 1500 x 2300 3.5 1 1.2 4 - 60Screener 2051 1800 2300 1800 x 2300 4.2 1 1.3 4 - 70
Eccentric screenED 1000 - 2500 3000 - 8000 1000 x 3000 - 2500 x 8000 1.5 - 10 1 2 - 10 40 - 2000DD 1000 - 2500 3000 - 8000 1000 x 3000 - 2500 x 8000 3 - 20 2 4 - 12 40 - 2000
Aqua vibrating separator sand
ASS 10/48 1000 4800 1000 x 2500 0.9 1 4 - 5 30 - 60ASS 12/48 1200 4800 1200 x 2500 1 1 5 - 6 50 - 80ASS 15/48 1500 4800 1500 x 2500 1.3 1 6 - 7 70 - 100ASS 18/48 1800 4800 1800 x 2500 1.6 1 7 - 8 30 - 120ASS 20/48 2000 4800 2000 x 2500 1.8 1 7 - 9 100 - 140
Coarse materialASK 10/48 1000 4800 1000 x 2500 0.9 1 4 - 5 50 - 90ASK 12/48 1200 4800 1200 x 2500 1 1 5 - 6 60 - 110ASK 15/48 1500 4800 1500 x 2500 1.3 1 6 - 7 70 - 140ASK 18/48 1800 4800 1800 x 2500 1.6 1 7 - 8 80 - 170ASK 20/48 2000 4800 2000 x 2500 1.8 1 7 - 9 90 - 180
34
35
Max
. feed
parti
cle si
ze [m
m]
No. o
f pos
sible
prod
uct
fracti
ons
Prod
uct p
artic
le siz
e(s) [m
m]
Requ
ired p
ower
[kW
]
10 1 0.053 - 5 1,510 1 0.063 - 5 1,5
1200 1 30 - 500 7.5 - 551200 2 30 - 500 11 - 55
4 1 1 - 4 7.54 1 1 - 4 114 1 1 - 4 154 1 1 - 4 18.54 1 1 - 4 22
32 1 2 - 32 5.532 1 2 - 3 27.532 1 2 - 32 7.532 1 2 - 32 1132 1 2 - 32 15
DERRICK CORPORATION590 Duke Road Buffalo, New York 14225, USATel.: +1 / 716 / 683 - 90 10Fax: +1 / 716 / 683 - 49 [email protected]
FREI FÖRDERTECHNIK AGSchwarzbachstraße 26 CH-3113 RubigenTel.: +41 / 31 / 720 56 56Fax: +41 / 31 / 720 56 [email protected]
GKM SIEBTECHNIK GMBHFelix Wankel Str. 11D-74915 WaibstadtTel.: +49 / 72 63 / 4 09 72-0Fax: +49 / 72 63 / 4 09 [email protected]
ife aufbereitungstechnik gmbhtel.: +43 7442 515-0 · austria
www.ife-bulk.com
the faces of screening technology
vibroconveyor technologyfördertechnik
screening technologysiebtechnik
magnetic technology magnettechnik
environmental technologyumwelttechnik
system technology systemtechnik
Double deck Bananascreen
3.200 x 10.000 mmDoppeldeck-Bananensieb
36
Main
test
sieve
diam
eter/
dimen
sion [
mm]
Addit
ional
test s
ieve d
iamete
r/
dimen
sion [
mm]
Numb
er of
test
sieve
s,ful
l high
t
Numb
er of
test
sieve
s,re
duce
d high
t
Dry s
ieving
Wet
sievin
g
Weig
ht, ap
prox
. kg
(with
out te
st sie
ves)
Sievin
g acti
on [3
-dime
nsion
al/
2-dim
ensio
nal]
Max
. weig
ht of
sievin
gma
terial
in kg
(with
full l
oad)
Drive
/oper
ation
ANALYSIS ANDLABORATORY SIEVES
Technical specifications
FRITSCH GMBH„ANALYSETTE 3 PRO“ 200/8“ 100 11 16 x x 21 2-D 3 Electromagnetic
„ANALYSETTE 3 SPARTAN“ 200/8“ 100 11 16 x x 21 2-D 3 Electromagnetic
„ANALYSETTE 18“ 400/16“ 200, 350, 450/ 7 12 x 92 3-D 6 2 unbalance motors8’’, 12’’, 18’’
HAVER & BOECKER, WIRE WEAVING DIVISION, OELDE
EML 200 digital plus 200, 8“ (203) 3“ (76,2), 100, 150 8 14 x x 34 3-D 3 Electromagnetic
EML 315 digital plus 300, 12“ (305) 200, 8“ (203), 250, 315 7 13 x x 52 3-D 6 Electromagnetic
EML 450 digital plus 400 200, 8“ (203), 250, 300 12 x x 100 3-D 15 Electromagnetic12“ (305), 315, 350,
18“ (450)
UWL 400 400 200, 8“ (203), 300, 12 x x 190 3-D 20 2 unbalance motors12“ (305), 315, 350,300 x 300, 500 x 500
Ro-Tap 8� RX-29 200, 8“ (203) 3“ (76,2) 6 x x 82 3-D Electromagnetic
Ro-Tap 12� RX-30 300, 12“ (305) 200, 8“ (203) 6 x x 86 3-D Electromotor
Ro-Tap II RX-94 200, 8“ (203) 2 x 6 2 x 10 x x 100 3-D Electromotor
Ro-Tap Model E 8� 200, 8“ (203) 3“ (76,2), 100, 150 8 14 x x 34 3-D 3 Electromagnetic
Ro-Tap Model E 12� 300, 12“ (305) 200, 8“ (203), 250 7 13 x x 52 3-D 6 Electromagnetic
RETSCH GMBHAS 200 control 200 100, 150, 203 (8“) 8 16 x x 30 3-D 3 Electromagnetic
AS 300 control 305 200, 203 (8“), 315 8 16 x x 35 3-D 6 Electromagnetic
AS 400 control 400 200, 203, 305 (12“) 6 8, 16 x 70 2-D 5 Electromotor
AS 450 control 400, 450 13/10 x x 220 3-D 25 Electromagnetic
AS 200 tap 200, 203 6 12 x 68 Horizontal, 3 Electromotorcircular move-ment with taps
AS 200 jet 203 1 x 14 Dispersion 0.1 Electromotorby air jet
ROTEX EUROPEGradex 2000 250 250 6 9 x 300 3-D 1 Mechan. autom. vibratoryGradex 3000 300 300 6 12 x 400 3-D 1 Mechan. autom. vibratoryWoodship gradex Drum Drum 9 9 x 500 2-D 5 Mechan. autom. drum
SIEBTECHNIK GMBH
ASM 200 200 100, 150, 203 10 10 x x 45 3-D 3 Electromagnetic
ASM 400 400 200, 203 10 10 x x 85 3-D 10 2 unbalance motors
LAVIB 300 300 100, 200, 203 8 8 x 70 2-D 6 Electromotor
SLS 200 200 100 1 1 x 18 – Electromotor
GAS 500 500 x 500 9 x 150 2-D 50 2 unbalance motors
GAS 1000 1000 x 1000 9 x 350 2-D 100 2 unbalance motors
GUSTAV MEISTER GMBHBlankenauer Str. 5D-37688 BeverungenTel.: +49 / 52 73 / 3 68 00-0Fax: +49 / 52 73 / 3 68 00-8 [email protected]
HAVER & BOECKER OHG,WIRE WEAVING DIVISIONEnnigerloher Straße 64D-59302 OeldeTel.: +49 / 25 22 / 3 00Fax: +49 / 25 22 / 3 04 [email protected]
JÜRGEN KÖLSCH GMBHWildspitzstr. 2D-87751 HeimertingenTel.: +49 / 83 35 / 9 89 50Fax: +49 / 83 35 / 98 95 [email protected]
37
Self-
read
justin
g amp
litud
e;
G-co
ntrol
Cons
tant a
ccele
ratio
n/ ro
tation
Max
. amp
litud
e app
rox./
mm (w
ith m
ax. lo
ad)
Inter
mitte
nt op
erati
on
Time s
witch
, minu
tes
Conti
nuou
s ope
ratio
n
x x 3 x 0 - 99 x
x x 3 x 0 - 99 x
x 1.8 5 - 60
x 3 x 0 - 99 x
x 1.5 x 0 - 99 x
x 2 x 0 - 99 x
2.8 0 - 599
x 0 - 99
x 0 - 99
x 0 - 99
x 2.2 x 0 - 99 x
x 1.6 x 0 - 99 x
x x 3 x 0 - 99 x
x x 2 x 0 - 99 x
x x x 0 - 99 x
x x 2.2 x 0 - 99 x
0 - 99
0 - 99
x x 25 x xx x 25 x xx x 25 x x
x 2,5 x 0 - 99 x
3 0 - 99 x
x 30 0 - 99 x
0 - 99 x
x 3.7 x
x 3.7 x
METSO MINERALS (DEUTSCHLAND) GMBHObere Riedstr. 111-115D-68309 MannheimTel.: +49 / 621 / 7 27 00 0Fax: +49 / 621 / 7 27 00 [email protected]
MINOX SIEBTECHNIK GMBHInterpark 8D-76877 Offenbach/QueichTel.: +49 / 63 48 / 9 82 80Fax: +49 / 63 48 / 40 [email protected]
REMA TIP TOP GMBHGruber Straße 63D-85586 PoingTel.: +49 / 81 21 / 7 07-2 45Fax: +43 / 81 21 / 7 07-2 [email protected]
ROTEXBerghauserstr. 62D-42859 Remscheid Tel.: +49 / 21 91 / 890 625Fax: +49 / 21 91 / 890 [email protected]
SANDVIK MINING AND CONSTRUCTIONCENTRAL EUROPE GMBHHafenstraße 280D-45356 EssenTel.: +49 / 2 01 / 17 85-300Fax: +49 / 2 01 / 17 85 [email protected] www.sandvik.com
KÜPER GMBH & CO. KGMettestraße 23D-44803 BochumTel.: +49 / 2 34 / 9 35 98-0 Fax: +49 / 2 34 / 9 35 [email protected] S
38
Scre
ening
med
ia
Type
Mate
rial
Dime
nsion
s
Sing
le lay
er
Mult
i laye
r
SCREEN LININGS
DERRICK CORPORATIONIndustrial Wire Screens With hook strips Stainless steel 48“ x 30“ X X
1220 x 760 mm
Industrial Wire Screens Pyramid screen Stainless steel, spring steel Upon request X X
PU-Screens With hook strips Polyurethan 48“ x 30“ X
1220 x 760 mm
HAVER & BOECKER, WIRE WEAVING DIVISION, OELDEIndustrial Wire Screens With or without hook stripes Stainless steel, spring steel Upon request X X
Industrial Wire Screens Special types Stainless steel, spring steel Upon request X X
Industrial Wire Screens Pre-tensioned screens, round Stainless steel, spring steel Up to 2650 mm � X X
Industrial Wire Screens Pre-tensioned screens, rectangular Stainless steel, spring steel Up to 2650 x 3100 mm � X X
Harp Screens With hook strips Stainless steel, spring steel Upon request X
Pressure Welded Screens With or without hook strips Stainless steel, manganese steel Upon requet X
ITE GMBHIndustrial Wire Screens With hook strips Stainless steel 1510 x 1220 mm/1830 x 770 mm X X
Industrial Wire Screens Panel screen Stainless steel 1253 x 635 mm X X
PU-Screens With hook strips Polyurethane 1510 x 1220 mm/1830 x 770 mm X
PU- Screens Panel screen Polyurethane 1253 x 635 mm X
METSO
Trellex 300 TS (Transversal Snap) Modular System (Trellstep) PU W = 300, L = 600 XRubber (40 - 60 Shore) W = 300, L = 600
Trellex 300 LS (Longitudinal Snap) Modular System PU W = 300, L = 500, 610 XRubber (40 - 60 Shore) W = 300, L = 500, 610, 700
Trellex 305 LS (Longitudinal Snap) Modular System PU W = 305, L = 610 XRubber (40 - 60 Shore) W = 305, L = 610, 700
Trellex 610 MP (Mining Panels) Modular System (bolted) Rubber (60 Shore) 610 x 610 X X
Trellex PCO (Panel Solutions) Screen Panels Rubber (60 Shore) Customised X X
Trellex PUS (Panel solutions) Screen Panels PU or Rubber Customised X X
Trellex TCO (Tensioned Solutions) Tensioned Screens PU or Rubber Customised X
Trellex TFX /Tensioned Solutions) Tensioned Screens Rubber (40 Shore) Customised X
REMA TIP TOP GMBHRubber based on NR/BR Reinforced with fabric plies Reinforced with stripes of fabric On request On request
Polyurethane (PU)
Technical specifications
Schenck Process GmbHPallaswiesenstraße 100D-64293 DarmstadtTel.: +49 / 61 51 / 15 31 10 00Fax: +49 / 61 51 / 15 31 12 [email protected]
SCREENING TECHNOLOGY CONSULTINGPinnaubogen 66 D-25482 AppenTel.: +49 / 41 01 / 2 34 34Fax: +49 / 41 01 / 20 08 [email protected]
SWECO EUROPE SARue de la Recherche 8B-1400 NivellesTel.: +32 / 67 89 34 34Fax: +32 / 67 89 34 [email protected]
39
Squa
re op
ening
Recta
ngula
r ope
ning
Othe
rs
32 μm Upon request
– 4 mm
32 μm Upon request Pyramid wire coating
– 2 mm with hook strips
75 μm Upon request
– 8 mm
0.025 - 100 mm Upon request Special edge treatment
upon request
0.025 - 100 mm Upon request Special edge treatment
upon request
0.025 - 10 mm Upon request Ultrasonic Screening Systems
0.025 - 10 mm Upon request Ultrasonic Screening Systems
Upon request
10 - 220 mm Upon request
400 μ - 5 mm On request Tension-bolt attachment system
44 μm - 3.5 mm On request Hammer-wedge attachment system
On request 300 μm - 4 mm Tension-bolt attachment system
On request 300 μm - 4 mm Hammer-wedge attachment system
3 - 46 On request Flat or step configuration3 - 75 On request
3 - 44 On request Flat or step configuration3 - 75 On request
3 - 44 On request Flat or step configuration3 - 75 On request
35 - 150 On request Skid bars
4 - 150 On request Skid bars
On request On request
On request On request With hooks
On request On request With hooks
Fastening systems, spray nozzles, traverse protection profiles
and more
Analysis/laboratory sieves
FRITSCH GMBHMILLING AND SIZINGIndustriestrasse 8D-55743 Idar-ObersteinTel.: +49 / 67 84 / 70 0Fax: +49 / 67 84 / 70 [email protected]
GKM SIEBTECHNIK GMBHFelix Wankel Str. 11D-74915 WaibstadtTel.: +49 / 72 63 / 4 09 72-0Fax: +49 / 72 63 / 4 09 [email protected]
HAVER & BOECKER OHG,WIRE WEAVING DIVISIONEnnigerloher Straße 64D-59302 OeldeTel.: +49 / 25 22 / 3 00Fax: +49 / 25 22 / 3 04 [email protected]
HOSOKAWA ALPINE AktiengesellschaftPeter-Doerfler-Str. 13–25D-86199 AugsburgTel.: +49 / 821 / 59 06-0Fax: +49 / 821 / 59 [email protected]
www.airjetsieve.com
MINOX SIEBTECHNIK GMBHInterpark 8D-76877 Offenbach/QueichTel.: +49 / 63 48 / 9 82 80Fax: +49 / 63 48 / 40 [email protected]
40
KÜPER GMBH & CO. KGMettestraße 23D-44803 BochumTel.: +49 / 2 34 / 9 35 98-0 Fax: +49 / 2 34 / 9 35 [email protected] S
METSO MINERALS (DEUTSCHLAND) GMBHObere Riedstr. 111-115D-68309 MannheimTel.: +49 / 621 / 7 27 00 0Fax: +49 / 621 / 7 27 00 [email protected]
REMA TIP TOP GMBHGruber Straße 63D-85586 PoingTel.: +49 / 81 21 / 7 07-2 45Fax: +43 / 81 21 / 7 07-2 [email protected]
SANDVIK MINING AND CONSTRUCTIONCENTRAL EUROPE GMBHHafenstraße 280D-45356 EssenTel.: +49 / 2 01 / 17 85-300Fax: +49 / 2 01 / 17 85 [email protected] www.sandvik.com
STAPPERT SPEZIAL-STAHL HANDEL GMBHABRASERVICERonsdorfer Str. 24D-40233 DüsseldorfTel.: +49 / 211 / 9 95 50 0Fax: +49 / 211 / 9 95 50 [email protected]
OLI VIBRATIONSTECHNIK GMBHNeesbacher Str. 25 D-65597 Hünfelden Tel.: +49 / 64 38 / 83 54-0Fax: +49 / 64 38 / 83 54 [email protected]
RETSCH GMBHRheinische Straße 36D-42781 HaanTel.: +49 / 21 29 / 55 61-0Fax: +49 / 21 29 / 87 [email protected]
RHEWUM GMBHRosentalstr. 24D-42899 RemscheidTel.: +49 / 21 91 / 57 67-0Fax: +49 / 21 91 / 57 [email protected]
ROTEXBerghauserstr. 62D-42859 Remscheid Tel.: +49 / 21 91 / 890 625Fax: +49 / 21 91 / 890 [email protected]
SIEBTECHNIK GMBHPlatanenallee 46D-45478 Mülheim/RuhrTel.: +49 / 2 08 / 58 01-00Fax: +49 / 2 08 / 58 01-3 [email protected]
SWECO EUROPE SARue de la Recherche 8B-1400 NivellesTel.: +32 / 67 89 34 34Fax: +32 / 67 89 34 [email protected]
Wear
AMMANN SCHWEIZ AGEisenbahnstr. 25CH-4901 LangenthalTel.: +41 / 62 / 916 64 64Fax: +41 / 62 / 916 64 [email protected]
www.ammann-group.com
AUGUST MÜLLER GMBH & CO. KGHochmaurenstraße 9D-78628 RottweilTel.: +49 / 7 41 / 28 02-0Fax: +49 / 7 41 / 28 [email protected]
FREI FÖRDERTECHNIK AGSchwarzbachstraße 26 CH-3113 RubigenTel.: +41 / 31 / 720 56 56Fax: +41 / 31 / 720 56 [email protected]
JÜRGEN KÖLSCH GMBHWildspitzstr. 2D-87751 HeimertingenTel.: +49 / 83 35 / 9 89 50Fax: +49 / 83 35 / 98 95 [email protected]
41
SCREENING TECHNOLOGY CONSULTINGPinnaubogen 66 D-25482 AppenTel.: +49 / 41 01 / 2 34 34Fax: +49 / 41 01 / 20 08 [email protected]
Accessories
AMMANN SCHWEIZ AGEisenbahnstr. 25CH-4901 LangenthalTel.: +41 / 62 / 916 64 64Fax: +41 / 62 / 916 64 [email protected]
APEX-LIEBEN GMBH CRUSH & SCREENTECLeopold-Hoesch-Str. 1D-52511 GeilenkirchenTel.: +49 / 24 51 / 4 09 58 84Fax: +49 / 24 51 / 4 09 58 [email protected]
AUGUST MÜLLER GMBH & CO. KGHochmaurenstraße 9D-78628 RottweilTel.: +49 / 7 41 / 28 02-0Fax: +49 / 7 41 / 28 [email protected]
FREI FÖRDERTECHNIK AGSchwarzbachstraße 26 CH-3113 RubigenTel.: +41 / 31 / 720 56 56Fax: +41 / 31 / 720 56 [email protected]
JÜRGEN KÖLSCH GMBHWildspitzstr. 2D-87751 HeimertingenTel.: +49 / 83 35 / 9 89 50Fax: +49 / 83 35 / 98 95 [email protected]
KÜPER GMBH & CO. KGMettestraße 23D-44803 BochumTel.: +49 / 2 34 / 9 35 98-0 Fax: +49 / 2 34 / 9 35 [email protected] S
METSO MINERALS (DEUTSCHLAND) GMBHObere Riedstr. 111-115D-68309 MannheimTel.: +49 / 621 / 7 27 00 0Fax: +49 / 621 / 7 27 00 [email protected]
OLI VIBRATIONSTECHNIK GMBHNeesbacher Str. 25 D-65597 Hünfelden Tel.: +49 / 64 38 / 83 54-0Fax: +49 / 64 38 / 83 54 [email protected]
PFREUNDT GMBH – WÄGESYSTEMERobert-Bosch-Straße 5D-46354 SüdlohnTel.: +49 / 28 62 / 98 07-0Fax: +49 / 28 62 / 98 [email protected]
ROCKSTER RECYCLERWirtschaftszeile West 2A-4482 EnnsdorfTel.: +43 / 72 23 / 8 10 00Fax: +43 / 72 23 / 8 10 00-3 [email protected]
ROSTA AG MASCHINENKOMPONENTENHauptstr. 58 CH-5502 Hunzenschwil/SchweizTel.: +41 / 62 / 8 97 24 21Fax: +41 / 62 / 8 97 15 [email protected]
Schenck Process GmbHPallaswiesenstraße 100D-64293 DarmstadtTel.: +49 / 61 51 / 15 31 10 00Fax: +49 / 61 51 / 15 31 12 [email protected]
STEINHAUS GMBHPlatanenallee 46D-45478 Mülheim/RuhrTel.: +49 / 2 08 / 58 01-01Fax: +49 / 2 08 / 58 01-5 [email protected]
SWECO EUROPE SARue de la Recherche 8B-1400 NivellesTel.: +32 / 67 89 34 34Fax: +32 / 67 89 34 [email protected]