sculptura direct/indirect spec sheet€¦ · sculptura direct/indirect spec sheet author: mike...

© 2020 StarTek Lighting America. All rights reserved. The information in this document is subject to change without notice. 1960 Swanson Ct, Unit C, Gurnee, IL 60031 • (877) STARTEK • [email protected] • www.starteklightingamerica.com

6FXOSWXUD 'LUHFW��,QGLUHFW

Type:

Project:

- 9/14/2020

FEATURES

· Seamless glare eliminating shade

· UGR < 19

· Extruded aluminum single piece housing

· 4’ and 8’ individual units, or continuous rows

· Straight runs with proprietary joiner design

· Direct and Indirect light levels can be set to any

combination at the factory

· Efficacy up to 137lm/W

· Textured powder coat finishes available in white,

black, silver and bronze

· Premium finishes also available

· Approved for dry and damp locations

· 0-10v dimming is standard

· Dim to 1% of output current is standard

DIMENSIONS

SCULPTDI - - - - - -

SERIES - LENGTH - DIRECT

LUMENS PER FT -

INDIRECT LUMENS PER FT

- DIRECT

DISTRIBUTION -

INDIRECT DISTRIBUTION

- CCT (80+ CRI)

SCULPTDI 4=4FT 350=350LPF 350=350LPF CL=Clear Lens 30K=3000K

8=8FT 500=500LPF 500=500LPF BW=Batwing 35K=3500K

XX=Run Length 750=750LPF 750=750LPF 40K=4000K

1000=1000LPF 1000=1000LPF

B50=Black Reflector, 50°�B80=Black Reflector, 80°�W50=White Reflector, 50°�W80=White Reflector, 80°� 50K=5000K

XX=Custom LPF XX=Custom LPF TW=Tunable White1

- - - -

- FINISH - MOUNTING** - VOLTAGE - OPTIONS

PW=Powder Coat White ACW05=Aircraft Cables w/ Canopy, White Cord 5’ U= 120v-277v CRI9050=Minimum 90 CRI (R9 50) DM=Daylight/Motion Sensor

PB=Powder Coat Black ACW10=Aircraft Cables w/ Canopy, White Cord 10’ C= 347v #EM=Emergency Circuit #EMB6=6W EM Battery

PS=Powder Coat Silver ACB05 =Aircraft Cables w/ Canopy, Black Cord 5’ #EMB10=10W EM Battery #EMB15=15W EM Battery

PBR=Powder Coat Bronze ACB10 =Aircraft Cables w/ Canopy, Black Cord 10’ GTD=Generator Transfer Device DD=Dual Driver

PSFx=Premium Stock Finish ALW05= Aircraft Cables w/ Loop, White Cord 5’ PSRD=Philips Sensor Ready (DALI) PSTP=Philips Step Dimming Driver

(See Pg. 5) ALW10= Aircraft Cables w/ Loop, White Cord 10’ DT1=eldoLED EcoDrive Dim to 1% (0-10V)

PO=Powder Coat Other* ALB05 = Aircraft Cables w/ Loop, Black Cord 5’ DTZ=eldoLED SoloDrive Dim to 0% (0-10V)

*Factory to be supplied ALB10 = Aircraft Cables w/ Loop, Black Cord 10’ TW-EL=eldoLED DUALdrive Tunable White (DALI)1

with RAL# or color chip AWM= Architectural Wall Mount LDE1=Lutron Hi-Lume EcoSystem LED driver with Soft-on, Fade‑to‑Black dimming

WM=Wall Mount PSQ02U=Lutron T-Series 1% 2-Channel Tunable White driver1

VDO=Lutron Vive Integral fixture control (RF with daylight and occupancy sensing)

EXAMPLE: SCULPTDI-40-750-350-B50-BW-35K-PB-ACB10-U-1EMB10 1 Tunable White Driver must be specified in options ** See mounting details on page 2

LUMEN PACKAGES Based on 3500K CCT. Other CCT available. NOTE: Lumen Package total cannot exceed 12,000 unless a “DD” (Dual Driver ) option is selected

MODEL LUMENS INPUT WATTS Lm/W

SCULPTDI-4-750-350-B80-BW-35K 4400 38 117

SCULPTDI-8-750-350-B80-BW-35K 8800 71 124

ϯ͘ϱ͟

Ϯ͘Ϭ͟ ORDERING LOGIC



Type:

Project:

- 9/14/2020

MOUNTING OPTIONS

ACxxx (Aircraft Cable with Canopy) - Drywall, Solid, Tile (On-Grid), Tile (Off-Grid)

ALxxx (Aircraft Cable with Loops)

AWM (Architectural Wall Mount) WM (Wall Mount)



Type:

Project:

- 9/14/2020

ROW CONFIGURATIONS

Each starter fixture will be provided with (2) mounting supports. Each additional fixture will be provided with (1) support which can be located anywhere along the 2nd half of the fixture (highlighted):

MOUNTING LOCATIONS

WIRING STANDARDS (Per NEC Requirements)

Each fixture will be manufactured with 300v,14ga AWG mains wiring.

Dependent on the length of the run, fixtures ordered with cords will be provided with the following (based on 12w/ft):

Up to 160’ 18/3-22/2

Up to 160’ w/NL 18/4-22/2

Over 160’ 14/5

Over 160’ w/NL 14/6

*347V fixtures will be provided with 600V cables as required

The standard construction of run lengths is to build with as many 8’ sections as possible and finish the run with a shorter length fixture if necessary. If a different configuration is needed to meet an aesthetic requirement, please indicate this on your P.O. when placing your order.

Examples of the standard construction of runs over 8’ are as follows:

ϭϬΖ�ZhE ϴ Ϯ

ϭϲΖ�ZhE ϴ ϴ

ϮϬΖ�ZhE ϴ ϴ ϰ

ϮϮΖ�ZhE ϴ ϴ ϲ

ϮϴΖ�ZhE ϴ ϴ ϴ ϰ



Type:

Project:

- 9/14/2020

PERFORMANCE

SCULPTDI-X-350-750-B80-BW (80+ CRI)

SCULPTDI-X-500-500-B80-BW (80+ CRI)

SCULPTDI-X-750-350-B50-CL (80+ CRI)

Model Lumens Watts LPW

SCULPTDI-4-350-750-B80-BW-30K 4,400 37 120

SCULPTDI-4-350-750-B80-BW-35K 4,400 36 123

SCULPTDI-4-350-750-B80-BW-40K 4,400 35 126

SCULPTDI-4-350-750-B80-BW-50K 4,400 34 130

Model

SCULPTDI-8-350-750-B80-BW-30K




Lumens

8,800

8,800

8,800

8,800

Watts

69

68

66

64

LPW

127

130

133

137


SCULPTDI-4-500-500-B80-BW-30K 4,000 34 119

SCULPTDI-4-500-500-B80-BW-35K 4,000 33 122

SCULPTDI-4-500-500-B80-BW-40K 4,000 32 125

SCULPTDI-4-500-500-B80-BW-50K 4,000 31 129

Model





Lumens

8,000

8,000

8,000

8,000

Watts

63

62

61

59

LPW

126

129

132

136


SCULPTDI-4-750-350-B50-CL-30K 4,400 38 110

SCULPTDI-4-750-350-B50-CL-35K 4,400 37 113

SCULPTDI-4-750-350-B50-CL-40K 4,400 36 116

SCULPTDI-4-750-350-B50-CL-50K 4,400 35 120

Model

SCULPTDI-8-750-350-B50-CL-30K




Lumens

8,800

8,800

8,800

8,800

Watts

72

70

69

67

LPW

117

120

123

127



Type:

Project:

- 9/14/2020

FINISHES

PREMIUM STOCK FINISHES

PSF001 (WOOD#1) PSF002 (WOOD#2) PSF003 (WOOD#3)

PSF004 (WOOD#4) PSF005 (WOOD#5) PSF006 (WOOD#6)

PSF007 (STONE #1) PSF008 (STONE #2) PSF009 (METAL #1)

STANDARD FINISHES

NOTE: A minimal impact to lead times will apply to products specified with Premium Stock Finishes (PSF). It is not to be assumed that these finishes are stocked in our warehouse, but rather, are readily available to us for your project.

All other custom finishes (PO) will incur a set up fee and will add an extended lead time to your project.

BLACK MINI TEXTURE WHITE MINI TEXTURE SILVER SPARKLE TEXTURE BRONZE SPARKLE TEXTURE



Type:

Project:

- 9/14/2020

Housing Nominal 2” x 3 1/2” square housing of continuous extruded 6063 T5 aluminum.

Color Colors for the housing are available in a powder coated white, black, silver, bronze and woodgrain with end cap to match. Consult factory for custom colors.

Luminaire Length 4' or 8' lengths are available for a single stand-alone section. Using internal joiners, 4’ and 8’ sections can be joined to form longer rows.

End Caps Injection molded flat end caps are mechanically attached with no exposed fasteners to enhance architectural aesthetic and prevent light leak

Source Lumen packages are available in four color temperature options (3000K, 3500K, 4000K and 5000K) — all within 2.5 MacAdam ellipses.

Certification

Intertek cETLus Listed. RoHS (Restriction of Hazardous Substances) and Buy American Act compliant.

Battery Philips Bodine lithium ion battery providing up to 780lm(6W) or up to 1300lm(10W) for 90 minutes. UL924 listed. Class 2 compliant. Meets Title 20 CEC (California Energy Commission) efficiency standards.

SPECIFICATIONS

CONTROL

Sensor

Wattstopper FS-205 v2 Low Voltage PIR. Integrated photosensor for hold-off daylighting control. 24VDC operating voltage. Adjustable time delay (30 seconds to 30 minutes).

WARRANTY

COMPANION PRODUCTS

5-year limited warranty. Complete warranty terms can be located at: http://www.starteklightingamerica.com/images/pdf/warranty/Beam_Series_Warranty.pdf Note: Actual performance may differ as a result of installation environment and final application. All values are design or typical values, measured under laboratory conditions, at 25°C (77°F) .

Environment Suitable for dry and damp locations. Operating temp.: -40°C to +50°C -40°F to +122°F

Dimming Driver Universal Lighting Technologies (ULT) Everline series of LED drivers allows tunable output currents to achieve infinite configurations of output. UL Class 2 recognized. 0-10v interface can be wired as Class 1 or Class 2 circuit. Included 2.5Kw ring and wave overcurrent protection, isolation of each individual output and a fully potted driver to protect from heat and vibration. Power factor <.93

Packaging

Sustainably manufactured outside cardboard box and biodegradable, protective poly-foam luminaire inserts.

^ĐƵůƉƚƵƌĂ��ŝƌĞĐƚ

sculptura direct/indirect spec sheet€¦ · sculptura direct/indirect spec sheet author: mike...

Documents