sea-shield 2012 catalog

24

Upload: francisco-linares

Post on 18-Jan-2015

1.090 views

Category:

Automotive


0 download

DESCRIPTION

Sea-Shield Premium Yacht Detailing ProductsFull line of products and detailing accessories.

TRANSCRIPT

Page 1: Sea-Shield 2012 Catalog
Page 2: Sea-Shield 2012 Catalog

The SEA-SHIELD® brand of products has been developed

over the years by experienced professionals and crew

working within the boating and yachting industry.

Our focus is to provide a line of products that clean faster,

polish better and protect longer than any other products in

their class.

We here at SEA-SHIELD® believe that our customers

should be out enjoying their boat not spending a lot of

time maintaining their boat.

Page 3: Sea-Shield 2012 Catalog

Catalog 2012

Page 4: Sea-Shield 2012 Catalog

Catalog 2012

• Extremely Concentrated• Safely Cleans all surfaces• Easy to rinse formula• Won’t remove wax

Sea-Shield® Boat Soap creates volumes of suds, yet rinses away in seconds without leaving a �lm. This amazing boat wash is so gentle it won’t remove even the most delicate waxes, and it instantly improves the high gloss shine of Sea-Shield® Coatings.Sea-Shield® Boat Soap is hyper-concentrated. One Gallon is enough product to produce up to 400 gallons of wash solution with suds that won’t quit until the wash is complete.

This product is exceptional for those tough cleaning jobs where soap and water just can’t get the job done. This ready-to-use formula is ideal for removing stains from a variety of surfaces such as paint, gel coat, vinyl, rubber, hypalon, plastics, fabrics, woods, etc.

• Removes stains due to engine exhaust • Cleans gel coat, paint, rubber and teak • Cleans stains on nonskid surfaces• Also cleans buffing pads

Page 5: Sea-Shield 2012 Catalog

Catalog 2012

Sea-Shield® Rust Stain Remover quickly and easily eliminates stains on �berglass and paint. It is a concentrated spray gel solution manufactured from ingredients chosen for their bio-biodegradability and their compatibility with the environment. Specially formulated and extremely e�ective at removing the stains around stainless steel �ttings, waterlines, and exhaust areas.

• Removes rust and corrosion stains• No hard rubbing or scrubbing required• Spray-Gel formula reduces runs

Sea-Shield® Surface Prep is a �ne, non-abrasive product that deeply cleans and lusters paint and clear plastic surfaces.It smooths away swirl marks, removes water spots, reduces �ne scratches, and increases overall paint gloss. As it cleans, Sea-Shield® Surface Prep leaves behind a special primer designed to promote proper bonding of Sea-Shield® Nano Coating protection or other sealants. Using Sea-Shield® Surface Prep greatly enhances and extends the life of Sea-Shield® coatings.

• Great for new paint• Prepares surface for wax/coating• Safely cleans paint, gelcoat, acrylic and clear vinyl• Easy wipe off

Page 6: Sea-Shield 2012 Catalog

Catalog 2012

• Mildew disappears!• No scrubbing formula• Safe for use on vinyl/hypalon

Sea-Shield® Mildew Eliminator is a professional strength formula that removes mildew on contact. Even the toughest stains are no match for Sea-Shield® Mildew Eliminator. Amazing results can be seen after 30 seconds of product penetration.

Page 7: Sea-Shield 2012 Catalog

Catalog 2012

Page 8: Sea-Shield 2012 Catalog

Catalog 2012

• Compounds and polishes have more working time• Great on heavily oxidized surfaces • Helps prevent damage to paint and gel coat

Lubrication to pro-long the life and working time of Sea-Shield® compounds and other brands as well. Excellent on areas of vessel that are heavily oxidized and need more wheel time to produce better results. Use in any situation that normal compounds and polishes dry out too quickly, such as on warm surfaces, full sun, high winds, chalky surfaces etc.

Sea-Shield® Heavy Cut #1 removes heavily oxidized and damaged surfaces on paint and gel coat. It can also be used to remove 1500# grit sandpaper scratches. Uniform compounding beads break down while polishing to reduce swirl marks and micro scratches. Follow with Sea-Shield® Cut & Polish #2 and Sea-Shield® Swirl Remover #3 to restore surface to like-new condition.

• Removes heavy scratches and oxidation• Removes 1500 grit sandpaper marks• Breaks down evenly for uniform finish

Page 9: Sea-Shield 2012 Catalog

Catalog 2012

• Removes light scratches and chalk residue• Restores oxidized surfaces• Removes heavy compound marks

This compound was designed to remove heavy oxidation, moderate scratches, and medium chalk residue from both painted and gel coat surfaces.

Follow with Sea-Shield® Swirl Remover #3 to restore gloss. Used by professionals looking to restore dull gel coat/paint. For very dry gel coat add Sea-Shield® Bu�ng Lube for better results.

Sea-Shield® Swirl Remover #3 is an exceptional polish designed to remove light oxidation, �ne scratches, light chalk, and light swirl marks from both paint and gel coat surfaces.

• Removes light oxidation• Completely erases swirl marks• Brings back the ultimate luster

Page 10: Sea-Shield 2012 Catalog

Catalog 2012

• Removes light scratches• Produces wet shine• Brings back the clarity of the surface• Easy-to-use formula

Sea-Shield® Final Polish is a one-step polish that restores paint, gel coat and acrylic. This product uses nanotechnology and microscopic particles to safely clean and polish paint to a perfect optical �nish and a high-gloss shine. No need to �ll in the scratches and swirls with thick waxes, because there are none. As a �nal step, apply Sea-Shield® Exhaust Guard for that �nal ultimate shine and protection.

Sea-Shield® Metal Polish is a liquid rouge that quickly removes oxidation, rust and scratches and restores a brilliant shine to dulled stainless steel, aluminum, brass, and chrome. For best results use in combination with a Sea-Shield® Soft Felt Pad. This ammonia-free formula wipes on and o� with little e�ort. For long-lasting protection, apply Sea-Shield® Nano Coating.

• Removes 2000 grit scratches• Restores original finish• Provides brilliant shine

Page 11: Sea-Shield 2012 Catalog

Catalog 2012

• Crystal Clear results• Leaves a perfectly prepped surface for glass coatings• Removes etched in water spots• Eliminates all micro-scratches

Sea-Shield® Glass Polish is the most advanced glass polish available on the market. A completely water based solution, it can be used to remove hard water spots, light scratches, and stains providing a clean and prepped surface for the Sea-Shield Nano Glass Protection System or any other glass protection.

TM

Page 12: Sea-Shield 2012 Catalog

Sea-Shield provides the best glass polishing cerium and coating system of its type for all your glass needs. Sea-Shield Glass Polishing Cerium restores glass to a “like new” condition by using special techniques and tools to remove hairline scratches and swirls caused by faulty prior cleaning methods. We believe that a glass surface should be crystal clear and free of contamination.We further provide Sea Shield Glass Coating, a unique, cutting edge window coating that chemically bonds to your glass providing and extremely durable hydrophobic e�ect that will last up to two years!

Sea-Shield understands the intense care it takes to maintain stainless steel and aluminum on a yacht that is why we put together our line, to reduce the amount of time you spend polishing. Sea-Shield Metal polish and accessories give you the tools to help bring back that new �nish when other products fail to do so. Sea-Shield Nano Coating gives you the long lasting protection (up to 6 months!) you need so that rust stains and corrosion don’t come back and dramatically reduce the amount of times you polish in a year.

Glass Surfaces

Metal Surfaces

Sea-Shield provides cleaning and restoration products for Acrylics, Corian, and Polycarbonate (Lexan) surfaces or any plastic surfaces. Whether removing scratches or contamination, Sea-Shield produces outstanding results by providing top-of-the-line products.Improve the visibility of your clear plastic surface by using Sea-Shield!

Plastic Surfaces

Page 13: Sea-Shield 2012 Catalog

Catalog 2012

Page 14: Sea-Shield 2012 Catalog

Catalog 2012

• Multi-surface coating• Extreme UV protection• Hyper-concentrated • Very water repellant

Sea-Shield® Nano Coating is the longest-lasting protection you can apply to your yacht or boat, works on a variety of surfaces including, but not limited to paint, gel coat, stainless steel, vinyl, leather, rubber, hypalon, Isinglass, and acrylic surfaces. This product takes minutes to apply to a clean and dry surface. Simply wipe on and wipe o�.

This product is a powerful polymer-based surface sealant designed to seal and protect �nishes from black streaks, engine exhaust, industrial fallout, acid rain, saltwater and UV rays. It seals and protects paint, gel coat, hypalon, rubber and hard plastic surfaces.

Strong UV Protection withAdvanced Hydrophobic Wax

Synthetic Hydrophobic Wax

• Protects against engine exhaust and black streaks• Last months with a single coating• Fast and easy application• Seals and protects paint, gel coat, hypalon, rubber and plastics

Page 15: Sea-Shield 2012 Catalog

Catalog 2012

• Cleanser and Wax spray• Refreshes Sea-Shield Coatings• Add to Boat Soap for wax booster• UV Protection/Water Repellent

Sea-Shield® Nano Fresh is a water-based environmentally-friendly cleaner /surface protecting product that contains no petroleum distillates. Because it is water-repellent it helps protect against both pollution and dirt adhesion. Sea-Shield® Nano Fresh works on most surfaces, and is an excellent cleaner/protection booster spray for surfaces that have been coated by Sea-Shield® Nano Coating, Sea-Shield® Exhaust Guard and Sea-Shield® Cleaner Wax.

Sea-Shield® Cleaner Wax is a one step product that cleans, polishes, and protects paint, gel coat and plastic.

Our Cleaner Wax is a simple -to-use ,“all-in-one” product that shines and protects while removing surface corrosion, water spots, exhaust residue, light scratches and swirl marks. Sea-Shield® Cleaner Wax should be used prior to Sea-Shield® Nano Fresh.

• Safely cleans and protects hard surfaces • Leaves a smooth, shiny finish• Wipes off easy

Non AbrasiveExhaust Guard Wax Technology

Page 16: Sea-Shield 2012 Catalog

Sea-Shield specializes in the restoration and protection of Gelcoat �nishes. Being thicker and harder than paint, there are many ways to remove oxidation from Gelcoat �nishes and bring back the original shine. Properly maintaining your Gelcoat �nish is one of the most important aspects of yacht maintenance. We work with and sell only the highest quality, most durable and environmentally friendly compounds, polishes and Nanotechnology coatings available. Technology is always changing and improving. Sea-Shield stays at the front of the pack by choosing to work with cutting-edge Nanotechnology products as part of our core line of protective coatings. Our bu�ng process is scratch and swirl free – we use innovative tools found in the aeronautical industry which have consistently produced outstanding results year after year.

Sea-Shield understands the care needed to keep your yacht looking great and keeping it protected from the harsh saltwater environment. Special care is required to restore and protect yacht paint. Repainting is an option, but an expensive and time consuming one. Sea-Shield provides the best polishing and coating products in the marine industry to restore your paint to a like new condition and protect it. By researching di�erent yacht paints and the nanotechnology industries we have developed new micro polishes and nano-polymer coatings that go well beyond our competitors.

Gelcoat Surfaces

Paint Surfaces

Page 17: Sea-Shield 2012 Catalog

Catalog 2012

Page 18: Sea-Shield 2012 Catalog

Catalog 2012

• Easy to grip• Applies sealants thinly & evenly• Washable The easiest to use micro�ber pad for applying Sea Shield coatings. The large surface allows for faster application and the micro�ber material provides an even coating.

Sea-Shield Applicator Sponge

• Applies sealants thinly & evenly• Very soft • Will not scratch or leave any marks

The Sea-Shield Black Sealing Pad used with Sea Shield Exhaust Guard or any other sealant is the �nal step to a �awless �nish using the Sea Shield Polishing System!The Sea-Shield Sealing Pad is a Velcro back foam pad that o�ers safe, thin and even application of your favorite wax, sealant or protectant. Your paint/gel coat is sealed and safe from damage due to salt, exhaust, detergents, and environmental factors while maintaining a rich, glossy shine!

Sea-Shield Sealing Pad

• Safe for all painted & gel coat finishes• Removes overspray and other bonded contaminants• Use with Sea-Shield Nano Fresh

The Sea-Shield Clay sponge is the ultimate replacement clay bar for the marine environment. Made of closed cell foam, (It �oats!), is easy to grip and use. The thin rubber-ized clay surface lasts a long time and is able to be wiped o� if it gets contaminated, unlike traditional clay bars. Used with Sea-Shield Nano Fresh it not only removes overspray and contaminants but cleans the surface and provides a protective coating.

Sea-Shield Clay Sponge

Page 19: Sea-Shield 2012 Catalog

Catalog 2012

Scratches and swirls on the surface of a boat are caused by improper boat washings. Dirt and grit from the boat’s surface are trapped in mitts and brushes. The Grit Guard Insert keeps dirt and other contaminants away from your wash mitt or brush. Grit Guard is a wash bucket grate system that prevents your brushes, sponges and wash mitt from reaching the bottom of the bucket where the grit in the wash water settles.

Sea-Shield Blond BoarBrush

The WipeOut Eraser uses powerful nano�ber technology to o�er a fast and e�ective solution for tough marine cleaning.The new larger size of the WipeOut Eraser and its reusable handle make it comfortable to use even in large areas. Use with Sea-Shield MPC to remove deep stains and scu� marks! Made in Germany, the WipeOut Eraser with Velcro handle and available re�lls o�ers convenience and �exibility.

Wipeout Eraser with handle/Refills

Sea-Shield Professional Bucket Insert

We found a brush company that went on a quest to �nd the world's �nest boar's bristle. What they found was a luxurious blonde boar hair that posses ideal qualities for boat and yacht care.We're proud to bring you the results of their quest, the world's �nest Blonde Boar's Hair Wash Brushes.Rugged, yet silky smooth, these blonde bristles stand up to repeated use while retaining a feather-soft texture.-Sea-Shield Boar Brush Blond 7 in.

-Sea-Shield Boar Brush Blond 10 in.

Sea-Shield Clear Squeeze Bottle

Whether you are mixing product for application or transferring it from a larger container, the Sea-Shield Squeeze Bottle is invaluable. This 16 ounce bottle allows you to measure out the amount of product required controlling costs and preventing waste. The Clear Squeeze Dispenser is also a great solution for mixing additives to products per use. Additives such as Sea-Shield Bu�ng Lube should be mixed as needed. And application of product is easy with the Clear Squeeze Dispenser, simply shake product and squeeze a small amount on applicator, bu�ng pad, or surface to be worked. Great for compounds, polishes and sealants.

Sea-Shield Clear Squeeze, 16 oz. /24

Pkg of 2

• Super tight lid for heavy compounds• Long lasting-will not become brittle

• Hand Made

Page 20: Sea-Shield 2012 Catalog

Catalog 2012

Micro�ber Applicator Mop is designed to clean and apply Sea Shield Coatings to large surfaces Bene�ts:Velcro Backing for easy on/o� of Sea Shield Mop PadsThreaded adapter for use with traditional or snap-on extension poles.

Sea-Shield Mop Applicator Pads

• Machine Washable• Excellent for hand application• Quality microfiber material

Excellent for applying Sea Shield coatings. Micro�ber material provides a thorough and even coating of product. Perfect size for applying in hard to reach places, small areas and stainless rails.

Sea-Shield Applicator Pad

Sea-Shield Applicator Mop15” base Velcro back

Replacement applicator mops specially designed to clean and apply Sea-Shield Coatings to large surfaces.

Sea-Shield Glass & Window Microfiber Towel16x16 inch, Green, Rounded Edges, Pkg/4.

The Sea-Shield Glass Micro�ber Towel provides the best way of cleaning glass. The �bers are speci�cally formulated to deep clean glass and remove smudges and streaks quickly and easily.Use with water, or with your favorite glass cleaning products.

Pkg/2

2 pack

• Provides Streak-Free Shine• Removes Smudges • Deep Cleans• No Shedding

Page 21: Sea-Shield 2012 Catalog

Catalog 2012

Our Sea-Shield Micro�ber Towels are big, soft, easy-to-use and very gentle on your vessels's paint, gelcoat or interior surfaces.

Sea-Shield Hand PolishingSoft Felt Pkg/6 Pkg/ 12

Our Sea-Shield Micro�ber Towels are big, soft, easy-to-use and very gentle on your vessels paint, gel coat or interior surfaces. We use very soft, high quality micro�bers that don’t cause scratches yet are durable enough to be washed repeatedly and still maintain that soft, scratch free texture.

Sea-Shield Microfiber Towel, 16x16 inch, Blue

Sea-Shield Deluxe Microfiber Towel16x16 inch, Gold w/ Black Trim, Pkg 2

Ideal for use on stainless steel and aluminum, bring out the brilliance of bright work by hand.Use with your preferred metal polish or with Sea-Shield Metal Polish and bu� away tarnish, scratches, and other minor surface imperfections. You will be amazed at the level of shine that can be achieved by hand! After polishing, protect your stainless steel and aluminum surfaces with a high quality sealant to maintain the renewed shine and prevent deterioration from exposure to elements.

Sea-Shield Glass Restoration Felt Polishing Disc

Sea-Shield Glass Restoration Felt Polishing Discs are equipped with a hook and loop backing that attaches securely to Sea-Shield velcro backing plates. Polishing by machine reduces the time and e�ort spent removing light scratches, water spots and stains from glass. Use with Sea-Shield Glass Polish for optimum results.

Pkg/10 - Pkg/50

4 inch od x 1/4 inch thread6 inch od x 1/4 inch thread

• Scratch Free• No Shedding• Deep Cleaning• Use for all your Polishing or Cleaning needs

• Perfect for new paint• Great for clear Acrylics• No shedding

• Highest quality felt in the marine industry• Great for Glass and Stainless Steel

Page 22: Sea-Shield 2012 Catalog

Catalog 2012

Sea-Shield Sealing Pad

The Sea-Shield Backing Plate has a 5.5 inch diameter and makes changing pads easy. Simply attach backing plate to your dual-action polisher and the velcro back design will hold all of your 6 inch pads. Changing pads is as easy as pulling one o� and attaching another. No need to fuss with tools to attach a new pad. Save time and keep moving through the detailing/sanding process.

Sea-Shield Backing Plate5/16 Threads Velcro Back

Sea-Shield Final Finishing Pad

The Sea Shield Black Sealing Pad used with Sea Shield Exhaust Guard is the �nal step to a �awless �nish using the Sea Shield Polishing System!The Sea Shield Sealing Pad is a velcro back foam pad that o�ers safe, thin and even application of your favorite wax, sealant or protectant. Your paint/gel coat is sealed and safe from damage due to salt, exhaust, detergents, and environmental factors while maintaining a rich, glossy shine!

Sea Shield Double Sided Pad Adaptor5/8 Thread

For use with double sided polishing padsHex shape Low thread count for �ush mount Easy on/easy o�

5/16-24 Threads, 3.5 inch5/16-24 Threads, 5 inch5/16-24 Threads, 6 inch5/8-11 Threads, 7 inch

• Removes swirl marks• Provides final polish• Machine Washable

4 inch / 6 inch Pad, Orange

Use with polishes or WaxesProvides brilliant shine on paint and gelcoat surfacesThe world's �rst pre-polymer �nal �nish pad. Applies super-thin �lms of sealant for fast removal!The Sea-Shield Final Finish Pad is an advanced pad for applying �ne polishes, glazes and waxes. New pre-polymer foam technology allows the pad to be used at higher speeds to achieve outstanding �nal gloss with low polish or wax residue.

6 inch, Black

• Applies sealants thinly & evenly• Very soft • Will not scratch

Page 23: Sea-Shield 2012 Catalog

Catalog 2012

Sea-Shield Yellow Polishing Pad

Embedded oxidation is no match for the Sea Shield Heavy Cutting Pad!. Using the Sea Shield Heavy Cutting Pad on your rotary bu�er in combination with a heavy paint/gelcoat compound will e�ectively remove embedded oxidation and more serious scratches and defects. The 1.5 inch pile of 50/50 blend �bers is speci�cally designed for use on paints and gelcoats. Renewing the �nish of your vessel renews its appearance and maintains its value.

Sea-Shield Heavy Cutting Pad9 inch

Sea-Shield White Cut & Polish Pad9 inch

• Soft Wool fibers for finish polishing • 1.50 inch wool pile• Extra Thick for longer life• High Density wool for even polishing• Double sided

9 inch diameter with 1.25 inch wool pile that e�ectively removes light oxidation and swirls while enhancing gloss.

Sea-Shield Sanding DiscCombines bene�ts of abrasive cloth and non-woven products. Constructed with a fabric face, foam center, and a grip backing. Abrasive grains are bonded evenly to the fabric face. Openings in the fabric allow water, solvent and air to �ow freely around the abrasive to prevent overheating. Works especially well when sanding contoured surfaces, corners and sharp edges. Open cell design holds large amounts of water for lubrication and cooling. Foam center also provides for even surface pressure that helps eliminate uneven marks when hand sanding. Use with paint, gel coat, acrylic, metal, etc.

• High density wool for even polishing• 1.25 inch wool pile• Extra thick for longer life• Great for moderate to heavy polishing

The new standard for compound polishing the Sea Shield Cut & Polish Pad provides maximum density and top quality wool for longer life and even polishing. The extra thick 1.25 in. Pile provides additional protection on the edge of pad.

9 inch

1000 / 2000 / 4000, Pkg/10

• Nylon/Wool fibers for Heavy Duty Compounding• High Density for even Cutting• Extra Thick for Longer Life• 1.5 inch pile

Page 24: Sea-Shield 2012 Catalog

HOW TO’S&