Seam ReinfoRcementSeam Reinforcement tape provides the strength necessary to sustain ultrasonically line bonded seams. made for performancewear and outerwear, it retains the soft feel, stretch and recovery of a USLB garment. By allowing for the virtual removal of the seam allowance, clothing is less bulky than with traditional sewing, sleeker and less likely to chafe. available in knit and woven, it can also be customized with your own fabric.

appLicationS

coRe coLoRS

SeaSonaL coLoRS

• Ultrasonic bonded seams

• Tape on inside or outside

• Decorative

SnowPantone 11-0601 TPX

GRape SLUShPantone 18-3224 TPX

BLackPantone 19-4006 TPX

RoSey poSeyPantone 1915C

aShPantone 19-4104 TPX

RadiationPantone 388C

cooL GReyPantone 428C

aLwayS SUnny in ShiRLeyPantone 1225C

**color reference may not be exact. contact Bemis for film sample**

www.BemiSwoRLdwide.com/LBc | 1.978.425.6761 pG. 1

Seam ReinfoRcement

technicaL data

Seam ReinfoRcement KNIT WOVEN

SRT 4000 SRT 5000

material Nylon/Spandex Knit Fabric / Polyurethane Adhesive Polyester/Spandex Woven Fabric / Polyurethane Adhesive

modulus1 1.3 lbf (0.6 kgf) 4.5 lbf (2.0 kgf)

adhesive Softening point 95°C (203°F) 95°C (203°F)

total thickness 0.020" (0.51 mm) 0.012" (0.31 mm)

adhesive thickness 0.004" (0.10 mm) 0.004" (0.10 mm)

common width 10 mm 10 mm

Service temperature -30 to 60°C (-22 to 140°F) -30 to 60°C (-22 to 140°F)

wash Excellent up to 60°C Excellent up to 60°C

Initial Bonding Conditions

hot air

nozzle position Same as a standard 2-layer seam tape Same as a standard 2-layer seam tape

nozzle air temperature 550–650°C 550–650°C

nozzle pressure 0.09 MPa 0.09 MPa

Roller pressure 0.4 MPa 0.4 MPa

Line Speed 4 m/min 4 m/min

flat press

temperature 115–170°C 115–170°C

time 15–25 seconds 15–25 seconds

pressure 2.8–4.2 Bar (40–60 psi) 2.8–4.2 Bar (40–60 psi)

Self fabric lamination is available. contact Bemis for details.

1 Modulus: The force required to pull a 12 mm (0.47”) wide sample by specified gauge to 50% elongation at 508 mm (20”) per minute after 3 cycles.

NOTE: Seller hereby excludes any express warranties and the implied warranties of merchantability and fitness for a particular purpose. The following is made in lieu of any such “warranties.” Bemis Associates, Inc. believes the information and specification supplied are reliable, but does not guarantee that any results shown or claimed will be obtained. Before using, the user shall determine the suitability and fitness of the product for its intended use. The user assumes all risks and liability whatever in connection with its own tests and use. Neither seller nor manufacturer shall be liable for any injury, loss or damage, direct or consequential, arising out of the use, misuse or inability to use this product.

www.BemiSwoRLdwide.com/LBc | 1.978.425.6761 pG. 2