seamless 1.0 extrusion + led tape - llia lighting · specifier project date seamless 1.0 extrusion...

SEAMLESS 1.0 EXTRUSION + LED TAPELIGHT

PROJECT

SKU

QUANTITY

LLI ARCHITECTURAL LIGHTING (847) 412-4880 [email protected] LLI ARCHITECTURAL LIGHTING RESERVES THE RIGHT TO CHANGE SPECIFICATIONS WITHOUT NOTICE

PAGE 1REV 20.11

Mud-in extrusion with a 1.0” lens that enables lines of light to be built into drywall ceilings and walls. Versatile and ideal for general lighting, accents, displays, and signage.

DATE

FEATURES & RECOMMENDED APPLICATIONS

SPECIFICATIONS

CLOSETRATED

5 YEARLIMITED

WARRANTY+ -

DIMMABLE

2.4”1.0”

1.2”

0.4”0.8”

FINISH Silver

LENS Frosted

WATTAGE 1.5W/ft to 8.8W/ft

IP RATING IP20 dry, IP65 wet, IP67 wet, IP68 wet

CCT / COLOR 2200K - 5200K; RGB; RGBW; variable white; warm fade

BEAM SPREAD 105°

INPUT VOLTAGE 24VDC

LENGTH Made to order. Actual lengths vary by LED tapelight cutpoints.

OUTPUT 124 to 689 lm/ft

LEDS Single binned LEDs +/- 30-70 CCT, MacAdam 3 SDCM

MATERIAL Extrusion - Anodized aluminum; Lens - Polycarbonate

MOUNTING Mounting screws and plaster (not included)

POWER SUPPLY Requires a 24V power supply – see below

WARRANTY IP20 - 5 year limited, IP65/67/68 - 3 year limited

PRODUCT: LLI-SM1-SF-H5.9W-35K-24V-48IN

SEAMLESS 1.0 EXTRUSION + LED TAPELIGHTORDERING GUIDE


PAGE 2REV 20.11

1a. 1b.FINISH LENS

S FS Silver Anodized finish F Frosted lens

1. FINISH & LENS

5. LENGTH5.

LENGTH

48IN Overall Extrusion+LED tapelight length will be rounded up or down based on nearest LED tapelight cut point.

Enter desired length in inches. Nominal length only. Actual lengths vary by LED cutpoint.

2-4. LED TAPELIGHT OPTIONS

1.5W (White) 20 / 65 / 68 22K / 27K / 30K / 35K / 42K / 52KT1.5W (White) 20 / 65 22K / 27K / 30K / 35K / 42K / 52K

★ 2.5W (White) 20 / 65 / 68 22K / 27K / 30K / 35K / 42K / 52K2.2W (White) 20 / 65 / 68 22K / 27K / 30K / 35K / 42K / 52KT2.5W (White) 20 / 65 22K / 27K / 30K / 35K / 42K / 52K3.5W (White) 20 / 65 / 68 22K / 27K / 30K / 35K / 42K / 52KWF3.5W (Warm Fade) 20 / 67 27D (18-27K) / 30D (18-30K)

★ 4.4W (White) 20 / 65 / 68 22K / 27K / 30K / 35K / 42K / 52KH3.5W (White) 20 / 65 / 68 22K / 27K / 30K / 35K / 42K / 52KVW5.9W (Variable White) 20 2K6 (25-65K)

T5.0W (White) 20 / 65 22K / 27K / 30K / 35K / 42K / 52KR5.4W (White, High R9) 20 / 65 / 68 22K / 27K / 30K / 35K / 42K / 52K

★ H4.4W (White) 20 / 65 / 68 22K / 27K / 30K / 35K / 42K / 52K8.8W (White) 20 / 65 22K / 27K / 30K / 35K / 42K / 52KH6.6W (White) 20 / 65 22K / 27K / 30K / 35K / 42K / 52K

★ H5.9W (White) 20 / 65 27K / 30K / 35K / 42K / 52K

★ T5.9W (White) 20 / 65 22K / 27K / 30K / 35K / 42K / 52KC2.2W (Static Color) 20 / 65 / 68 RED / AMB / GRN / BLUC4.4W (Static Color) 20 / 65 / 68 RED / AMB / GRN / BLUCC4.4W (RGB) 20 / 65 / 68 RGBTC4.4W (RGB) 20 / 65 RGB

★ CC5.9W (RGB) 20 / 65 RGBCW4.4W (RGBW) 20 / 65 R27 (RGB + 27K) / R52CW5.8W (RGBW) 20 / 65 R30 (RGB + 30K) / R60

★ CW7.0W (RGBW) 20 R27 (RGB + 27K) / R30 / R35 / R42CW7.6W (RGBW) 20 / 65 R22 (RGB + 22K) / R27 / R30 / R35 / R42 / R52CW8.8W (RGBW) 20 / 65 R27 (RGB + 27K) / R30 / R35 / R42 / R52

2. 3. 4.LED CODE IP RATING CCT / COLOR

H4.4W — [blank] — 30K

For IP20, leave {blank}.

★ Recommended options. ** Diode visibility data tested at 100% output. Diodes may become more visible as tapelight dims. ^ Lumen data provided based on frosted lens, 30K for white and combined output for RGB and RGB(W).

SEMI-UNIFORM

UNIFORM

WATTAGEDELIVERED LM/FT @ 30K^

FROSTED LENS APPEARANCE** CRI MAX. RUN

CUT POINTS*

1.5 W/ft 124 lm/ft IMAGING 90+ 60 ft 3.9”

1.5 W/ft 134 lm/ft SEMI-UNIFORM 90+ 26 ft 1”



2.5 W/ft 176 lm/ft UNIFORM 90+ 20 ft 1”

3.5 W/ft 208 lm/ft SEMI-UNIFORM 90+ 40 ft 2.5”



3.5 W/ft 314 lm/ft UNIFORM 90+ 32 ft 2.5”









2.2 W/ft N/A IMAGING — 60 ft 3.9”

4.4 W/ft N/A UNIFORM — 32 ft 2”

4.4 W/ft 92 lm/ft IMAGING — 32 ft 3.9”

4.4 W/ft 133 lm/ft UNIFORM — 16 ft 2”

5.9 W/ft 246 lm/ft UNIFORM — 32 ft 2.8”






TECHNICAL DATA

FRONT CONNECTION

7. 8. 9.LEAD LENGTH LEAD TYPE FEED TYPE

48IN SL EF

REAR CONNECTION*


[blank]

PRODUCT CODE REQUIRED FOR LAYOUT PURPOSES

More LED tapelight and color options available upon request. Visit www.llialighting.com or contact us for details.

1a. 1b. 2. 3. 4. 5.PROFILE FINISH LENS LED IP RATING CCT / COLOR INPUT LENGTH

LLI-SM1 — S F — H4.4W — 65 — 30K — 24V — 48IN

POWER FEED


[blank]

FINISHSilver

LENSFrosted

WATTS/FT1.5-8.8 W/ft

IP RATING[blank] - IP2065 - IP6567 - IP6768 - IP68

WHITE22K-52KWarm FadeVariable White

COLORStatic ColorRGBRGBW

Enter desired length in inches. Nominal length only. Actual lengths vary by LED cutpoint.

Example part number: LLI-SM1-SF-H4.4W-65-35K-24V-48IN

[blank] - Ships standard with 48” soldered end power feed. Refer to section 7 on the next page for an alternate power feed configuration.

PRODUCT CODE OPTIONAL


PAGE 3REV 20.11

SEAMLESS 1.0 EXTRUSION + LED TAPELIGHTORDERING GUIDE (CONTINUED)

ACCESSORIES (SOLD SEPARATELY)

6-8. POWER FEED (optional)

RIGHT SIDE FEED

BOTTOM FEED

LEFT SIDE FEED END FEED


[blank] [blank] [blank]

Enter desired lead length in inches

HW Hard wire EF End Feed

MBC Male barrel BF Bottom Feed

FBC Female barrel RF Right Side Feed

LF Left Side Feed

Ships standard with 48” end feed power wire.

FACTORY ASSEMBLED CORNERS (NO MITER CUTS REQUIRED. SOLD SEPARATELY. SCREWS AND JOINER BARS INCLUDED.)

Dimensions:12” L x 7” L

Dimensions:12” L x 12” L

Dimensions:6.4” L x 6.4” L

Dimensions:6.4” L x 6.4” L

***Default: [blank] - 48” hard wire lead, end feed

***All power wires are soldered to the tapelight unless solderless connectors are specified. For solderless connector compatibility, download the compatibility chart at www.llialighting.com/resources

T CORNER

LLI-XR-SM1-TEE-6IN

X CORNER

LLI-XR-SM1-CROSS-6IN LLI-XR-SM1-90D-INS-6IN

90° INSIDE CORNER 90° FLAT CORNER

LLI-XR-SM1-90D-FLT-6IN

90° OUTSIDE CORNER

LLI-XR-SM1-90D-OUT-6INDimensions:7” L x 7” L

JOINER BARS

LLI-XR-SM1-JBAR-4IN(Screws and hex wrench included)

L JOINER BARS

LLI-XR-SM1-JBAR-90F(Screws and hex wrench included)

LLI-XR-SM1-EC

ENDCAP4 endcaps included; extra endcaps sold separately

(Output @ 30K) x (Color temperature lumen multiplier) x (IP rating lumen multiplier) = Estimated delivered lm/ft

LLI-SM1-SF-4.4W-30K-24V* BEAM SPREAD POLAR CHART CONICAL CHART

POWER (W/ft) 4.4W

OUTPUT (lm/ft) 253 lm/ft

COLOR TEMPERATURE 3000K

BEAM SPREAD 105°

EFFICACY (lm/W) 58 lm/W

LUMEN OUTPUT MULTIPLIERS (FOR ESTIMATING DELIVERED LUMENS)


PAGE 4REV 20.11

COLOR TEMPERATURE

LUMEN MULTIPLIER

2200K 0.8

2700K 0.9

3000K 1

3500K 1.1

4200K 1.2

5200K 1.25

SEAMLESS 1.0 EXTRUSION + LED TAPELIGHT

IP RATING LUMEN MULTIPLIER

IP20 1

IP65 0.9

IP67 0.9

IP68 0.9

EXAMPLE: Extrusion with 8.8W, IP65, 5200K

444 lm/ft x 1.25 x 0.9 = 500 lm/ft

PHOTOMETRY

105°

*Information for other options available upon request. IES files for extrusion+tapelight available upon request.

1.7 ft

3.3 ft

5.0 ft

6.7 ft

8.3 ft

10.0 ft

32.3 fc

8.6 fc

3.7 fc

2.1 fc

1.4 fc

0.9 fc

BEAM WIDTH

4.4 ft

8.6 ft

13.0 ft

17.5 ft

21.7 ft

26.1 ft

ILLUMINANCE AT A DISTANCEDistance from

light sourceFootcandles @ beam center

147

165

90

26

L

W147

165

90

26H

L

W

H

147

165

90

26

L

W147

165

90

26H

147

165

90

26

L

W147

165

90

26H


PAGE 5REV 20.11

POWER SUPPLIES (SOLD SEPARATELY)

DIMMABLE ELECTRONIC 0-10V

PART NUMBER CAPACITY OUTPUT CLASS LOCATION L W HLLI-PS-DE010-030W-24V-KO 30W 24V CLASS 2 WET 6.5” 3.6” 1.6”

LLI-PS-DE010-060W-24V-KO 60W 24V CLASS 2 WET 7.4” 3.6” 1.6”




NON-DIMMABLE ELECTRONIC

PART NUMBER CAPACITY OUTPUT CLASS LOCATION L W HLLI-PS-NDE-030W-24V-KO 30W 24V CLASS 2 WET 6.5” 3.5” 1.02”

LLI-PS-NDE-060W-24V-KO 60W 24V CLASS 2 WET 7.4” 3.5” 1.2”

LLI-PS-NDE-096W-24V-KO 96W 24V CLASS 2 WET 8.7” 3.7” 1.7”

LLI-PS-DEC-200W-24V-KO 200W 24V CLASS 1 WET 10.3” 4.1” 1.8”

LLI-PS-DEC-300W-24V-KO 300W 24V CLASS 1 WET 10.9” 4.3” 1.8”

UNIVERSAL DIMMABLE ELECTRONIC FLICKER-FREE

PART NUMBER CAPACITY OUTPUT CLASS LOCATION L W HLLI-PS-UDEFF-030W-24V-KO 30W 24V CLASS 2 WET 6.5” 3.6” 1.0”

LLI-PS-UDEFF-060W-24V-KO 60W 24V CLASS 2 WET 7.4” 3.6” 1.0”




PART NUMBER CAPACITY OUTPUT CLASS LOCATION L W HLLI-PS-DM-020W-24V-KO 30W 24V CLASS 2 NEMA 3R 7.38” 2.11” 1.60”

LLI-PS-DM-040W-24V-KO 60W 24V CLASS 2 NEMA 3R 7.38” 2.11” 1.60”






LLI-PS-DM-300W-24V-CL2-KO 6 x 50W 24V CLASS 2 NEMA 3R 10.29” 5.69” 3.43”

LLI-PS-DM-600W-24V-KO 2 x 300W 24V CLASS 1 NEMA 3R 10.29” 6.79” 4.68”

W

H

L

DIMMABLE MAGNETIC

Optimal performance dims to 0%.*

*Performance can be affected by driver loading and dimmer type.

Optimal performance dims to 2-5%.

Optimal performance dims to 5-10%.*

PART NUMBER CAPACITY OUTPUT CLASS LOCATION L W HL3D0-96W24V-U 96W 24V CLASS 2 INDOOR 10.5” 5.5” 2.0”

LUTRON HI-LUME PREMIER 0.1% DIMMABLE ELECTRONICSoft-on, Fade-to-Black, continuous flicker-free dimming from 100% to 0.1.


PAGE 6REV 20.11

CONTROLS (SOLD SEPARATELY)

https://www.llialighting.com/C/23/Controls

seamless 1.0 extrusion + led tape - llia lighting · specifier project date seamless 1.0 extrusion...

Documents