Top results
microsoft word - e-18207tm.docxiqbal shareef sff bradley university, peoria, illinois wear of steel and ti6al4v rollers in vacuum nasa/tm—2012-217619 june 2012 nasa
reducing wear of steel rolling against ti6al4v operating in vacuum timothy l krantz* abstract this work was motivated by a qualification test of a mechanism for a space telescope…
425 wear of steel and ti6al4v rollers in vacuum timothy krantz* and iqbal shareef** abstract this investigation was prompted by results of a qualification test of a mechanism…
doi: http://dx.doi.org/10.1590/1980-5373-mr-2017-0175 materials research. 2017; 20(4): 1143-1152 © 2017 laser surface modification of ti6al4v-cu for improved microhardness…
y. juan et al.: wear-resistant single-phase high-entropy alloy coatings ... 751–758 wear-resistant single-phase high-entropy alloy coatings prepared on ti6al4v with laser…
a numerical model to study the tool wear influence in ti6al4v orthogonal cutting [email protected] matinée des chercheurs 2015 context f aeronautical industry…
jurnal tribologi 19 2018 88-97 received 26 june 2018 received in revised form 3 august 2018 accepted 20 november 2018. to cite this article: mohid and rahim 2018. tool wear…
journal of materials science and chemical engineering 2015 3 202-207 published online july 2015 in scires http:wwwscirporgjournalmsce http:dxdoiorg104236msce201537027 how…
timothy l. krantz glenn research center, cleveland, ohio iqbal shareef sff bradley university, peoria, illinois wear of steel and ti6al4v rollers in vacuum nasa/tm—2012-217619…
1. gaziantep universityengineering facultyexperimental investigation ofabrasive flow machining of ti6al4vsupervisiorprof. dr. Ömer eyercİoĞlugraduation projectmechanical…
trans. nonferrous met. soc. china 24(2014) 3103−3110 deformed microstructure and texture of ti6al4v alloy liu-qing yang, yan-qing yang state key laboratory of solidification…
heat treatment of the casted ti6al4v titanium alloy tepelnÉ spracovanie liatej titÁnovej zliatiny ti6al4v authors: peter pinke (1), mihály réger (2) workplace: (1) department…
indian society for non-destructive testing hyderabad chapter proc. national seminar on non-destructive evaluation dec. 7 - 9, 2006, hyderabad nde-2006 acoustic emission response…
abstract— the effect of laser power on the resulting microstructure and microhardness of laser metal deposited ti6al4v powder on ti6al4v substrate has been investigated.…
experimentele karakterisatie en modellering van het dynamisch materiaalgedrag van de titaniumlegering ti6al4v experimental characterisation and modelling of the dynamic behaviour…
polydopamine linking substrate for amps: characterisation and stability on ti6al4vpolydopamine linking substrate for amps: characterisation and stability on ti6al4v zuzanna
heat treatment of the casted ti6al4v titanium alloy tepelnÉ spracovanie liatej titÁnovej zliatiny ti6al4v authors: peter pinke (1), mihály réger (2) workplace: (1) department…
untitledinuence of particle distribution on macroscopic properties of particle flow model bin gou swjtu: southwest jiaotong university mengqi zhang ( [email protected]
untitledinuence of contractors management practices on performance of housing construction projects in kisii county, kenya theophanus nyakundi momanyi ( [email protected]
prospective randomized comparison of distal extension of midline urethral plate incision and standard tubularized incised plate urethroplasty – do anatomical penile