seating and positioning - stormtdx.invacare.comstormtdx.invacare.com/doc_files/92_038.pdf ·...

Seating and Positioning

Parts Catalog Issued: May 12, 2015

The information contained in this document is subject to change without notice. This catalog containsservice parts for Form No. 92-38. If you have any questions regarding this catalog, please contact one ofour Customer Service Representatives.

For Customer Service Support Call:1-800-333-6900

For Faxed In Orders Call:1-800-678-4682 or

1-440-366-0709For Technical Service Call:

1-800-832-4707Literature Can Be Found at:

www.invacare.com or1-800-828-6272

SYMBOL DEFINITIONThroughout this catalog you will notice letters to draw your attention to specific footnotes which are located at thebottom of the page or below specified charts.

HARDWARE MEASUREMENTS

Examples:= Special Comments= General information pertaining to that specific page= No Longer Available

NOTE:NLA

The measurements for the hardware will be listed as follows:Screws, BoltsWashersSpacers

For your convenience, we have supplied an area for you to list your Invacare Representatives.

A,B,C etc.

Diameter X Thread Count/Pitch X LengthInside Diameter X Outside Diameter X ThicknessInside Diameter X Outside Diameter X Length

Name Phone Numbers

© 2015 Invacare Corporation, Elyria, Ohio. Invacare, Ulti-Mate, Infinity, Silhouette, ContourU, Yes, you can. and the Medallion Design are registeredtrademarks; Personal Back 10, Personal Back 10 Plus, Personal Seat VF, DualFlex, UniBack, InTouch, TargIT, Stabilite, Flovair, PaxBak, and AirFlo are

trademarks of Invacare Corporation.

Parts Catalog Usage Guide

1Form No. 92-38 To order call toll free 1-800-333-6900, or www.invacare.com

Comfort-Mate Extra Base Hardware ........................................................................................ 81

Comfort-Mate Extra Base Inner Covers ................................................................................... 80

Comfort-Mate Extra Base Outer Covers (CMBXC) .................................................................. 82

Comfort-Mate Extra Cushion Outer Covers (CMEXC) ............................................................. 79

Comfort-Mate Hardware ........................................................................................................... 78

Contoura Seating, Seat Cushion .............................................................................................. 62

ContourU Adjustable Back Hardware ....................................................................................... 102

ContourU Adjustable Footrests ................................................................................................ 109

ContourU Adjustable Legrest Tops .......................................................................................... 111ContourU and Silhouette Back and Seat Mounting Hardware, For 7/8" or 1" Tubing (FDI-596ECONO-EZE and FDI-538 ECONO-EZE) 112

ContourU Arm Rests ................................................................................................................ 106

ContourU Dial Links ................................................................................................................. 105

ContourU Growth Links ............................................................................................................ 104

ContourU Pan Mounting Brackets ............................................................................................ 107

ContourU Wood Mounting Brackets ......................................................................................... 108

Curved Back and Curved Back Pneumatic Covers, Cane Clamps and Back Mounting Hooks 91

Drop Base Mounting Hardware ................................................................................................ 67

Infinity Back Hardware and Accessories - After 12/15/01 ........................................................ 17

Infinity Back Hardware and Accessories - Before 12/15/01 ..................................................... 13

Infinity Drop Base Hardware .................................................................................................... 11

Infinity Inner Cushion Covers ................................................................................................... 25

TABLE of CONTENTSDescription Page

Number

2To order call toll free 1-800-333-6900, or www.invacare.comForm No. 92-38

Infinity Leg Wedges, FloGel, and Visco Foam Inserts ............................................................. 58

Infinity LoBac Hardware and Accessories ................................................................................ 22

Infinity Outer Cushion Covers .................................................................................................. 24

InTouch Flovair Replacement Outer Covers (Before 11/21/11) ............................................... 43

InTouch Propel Back ................................................................................................................ 26

InTouch Stabilite OM Obliquity Inserts ..................................................................................... 48

InTouch Stabilite OM Removable Leg Wedge ......................................................................... 50

InTouch Stabilite OM Replacement Inner Covers (Incontinence) ............................................ 54

InTouch Stabilite OM Replacement Outer Covers ................................................................... 47

InTouch Stabilite Replacement Outer Covers (Before 11/21/11) ............................................. 45

InTouch TargIT Covers ............................................................................................................ 41

KSS Mounting Brackets For (12"-16" Wide) ADJASBA and Pronto M71 jr.Seat Frames ........ 100

KSS Seating Accessories for Abductors, Adductors and Laterals ........................................... 94

KSS Seating Accessories for Basic Head Support .................................................................. 96

KSS Seating Accessories for Headrest Pads and Growth Brackets ........................................ 98

Matrx Airflo Inner Covers .......................................................................................................... 60

Matrx Airflo Inserts and Accessories ........................................................................................ 61

Matrx Flovair Replacement Gel/Air Overlays ........................................................................... 57

Matrx Flovair Replacement Outer Covers (After 11/20/11) ...................................................... 44

Matrx PB Back, Matrx PB Deep Back, Matrx PB HD Back and Matrx PB Deep HD Back ....... 77

Matrx PCS Back Headrest Clamp Kit - Lever Style .................................................................. 37


Number


Matrx PCS Back Mounting Hardware - Tilt & Recline Only ...................................................... 32

Matrx PCS Back Mounting Hardware and Cane Clamp Hardware - Round Canes (14"-19" W) 28

Matrx PCS Back Mounting Hardware and Cane Clamp Hardware - Round Canes (20"-24" W) 30

Matrx PCS Back Upholstery Assemblies ................................................................................. 34

Matrx PCS Back Wire Tray ...................................................................................................... 36

Matrx PCS Lateral Support ...................................................................................................... 39Matrx Personal Back10 (TALL Reg./TALL Plus) Hardware, Formula TRE Conv. Recline w/BPO Option - For Extruded Canes 75

Matrx Stabilite & Flovair Removable Leg Wedge ..................................................................... 52

Matrx Stabilite and InTouch Stabilite OM Replacement Air Overlays ...................................... 56

Matrx Stabilite Replacement Outer Covers (After 11/20/11) .................................................... 46

Packaging & Literature ............................................................................................................. 6

PaxBac Hardware .................................................................................................................... 90Personal Back, Personal Back Plus, Matrx Personal Back10 Reg./Tall, Matrx Personal Back10Plus Reg./Tall - For Round Canes 69

Personal Seat Covers .............................................................................................................. 65

Personal Seat Fluid Bag ........................................................................................................... 66

S-Back Cover ........................................................................................................................... 89

Silhouette Back Mounting Hardware ........................................................................................ 114

Silhouette Extended Mounting Bracket .................................................................................... 117

Silhouette Lateral Supports and Inserts ................................................................................... 115

Silhouette Shape Sensor and (ContourU Base Before 9/1/09) ................................................ 121

Silhouette Shape Sensor and (ContourU Before 9/1/09) Hardware ......................................... 123


Number


Silhouette Shape Sensor and ContourU Accessories .............................................................. 122

Stabilite & Flovair Replacement Inner Covers (Incontinence) .................................................. 55

Tray Mounting Hardware - Swing and Non-Swing Lap ............................................................ 118

Tray Mounting Hardware - TR40L and TR40R ........................................................................ 120

Ulti-Mate Air Back and Ulti-Mate Air Back Pneumatic .............................................................. 87

Ulti-Mate Base Hardware ......................................................................................................... 85

Ulti-Mate Base Inner Covers .................................................................................................... 86

Ulti-Mate Cushion Inner Cover ................................................................................................. 83

Versair Adjustable Tension Back Upholstery Assemblies and Privacy Flaps .......................... 126


Number


Packaging and LiteraturePackaging

System CartonPart Number Carton Dimensions

29-41/64" x 15-7/8" x 35"1300034-NLAShape Sensor, Back Digitizer24" x 10" x 32"1300026-NLAShape Sensor, Seat Digitizer

33-3/8" x 15" x 42-1/4"1300046-NLAShape Sensor, Frame18-3/4" x 5-1/4" x 21"1071927-NLAComfort-Mate, Cushion

18-1/2" x 4-7/8" x 19-5/8"1142650-NLA

InTouch Cushion 15"-18" Wide x15"-19" Deep See Note(s) A

24-1/2" x 4-7/8" x 23-5/8"1142651-NLA

InTouch Cushion 19"-24" Wide x20"-22" Deep See Note(s) A

24-1/2" x 4-7/8" x 23-5/8"1142650-NLA

InTouch Propel Back 15"-18" Wide x15"-20" Deep See Note(s) A

A - The bag is included with the Carton. NOTE:

Literature - ContourU

Item Number DescriptionInstruction Sheet, Pan Mounting Bracket0900114Instruction Sheet, Snap Lock Assembly0900119-NLA

Instruction Sheet, Universal Clamp Assembly0900120Instruction Sheet, Wood Mounting Bracket0900116

NOTE: When adjusting or replacing parts, please refer to your Owner's Manual for assistance.


Packaging and LiteratureLiterature - Infinity

Part Number DescriptionInstruction Sheet, Infinity Back1077719-NLA

See Note(s) AOwner's Manual, Infinity Back1109923-NLA

See Note(s) AOwner's Manual, LoBac Hardware1095174

Instruction Sheet, Infinity Drop Base1081825-NLA See Note(s) A

Instruction Sheet, Infinity Gel Insert1081823-NLAInstruction Sheet, Infinity Headrest Clamp1084380-NLA

See Note(s) AInstruction Sheet, Infinity Headrest1079306-NLA

See Note(s) AInstruction Sheet, Infinity Cushion1081824-NLAInstruction Sheet, Slide Release1074563-NLA

See Note(s) AA - Item is no longer available from the Invacare Service Parts Department. Refer to the Invacare Website under "Product LiteratureSearch". Enter the part number in the "Keywords" field and download a free PDF version copy.

NOTE:



Packaging and LiteratureLiterature - Invacare Conventional Seating

Part Number DescriptionInstruction Sheet, Absolute Cushion (formally know as

Esstential Cushions)1078995-NLA

See Note(s) AInstruction Sheet, Single Density Cushion1100883

Instruction Sheet, Personal Seat1061931-NLAOwner's Manual, Personal Back1034270-NLA

Instruction Sheet, Personal Back101114817-NLA See Note(s) A

Instruction Sheet, Headrest Reinforcement Kit1049521-NLA See Note(s) A

Instruction Sheet, Personal Back Mounting Hardware1060985-NLA See Note(s) A

Instruction Sheet, Pan Mounting Bracket0900114Instruction Sheet, Snap Lock Assembly0900119-NLA

Instruction Sheet, Universal Clamp Assembly0900120Instruction Sheet, Wood Mounting Bracket0900116Instruction Sheet, Flip Kit Personal Back1036731-NLA

See Note(s) AInstruction Sheet, MSDS Personal Back - part A1053771-NLAInstruction Sheet, MSDS Personal Back - part B1053772-NLA

A - Item is no longer available from the Invacare Service Parts Department. Refer to the Invacare Website under "Product LiteratureSearch". Enter the part number in the "Keywords" field and download a free PDF version copy.

NOTE:



Packaging and LiteratureLiterature - KSS Seating System

Part Number DescriptionNLA - Instruction Sheet, Comfort Mate/Comfort Mate

Plus Cushion/Base1068864-NLA

See Note(s) ANLA - Instruction Sheet, Curved Back1068869-NLA

Instruction Sheet, Growth Bracket1068857-NLA See Note(s) A

Instruction Sheet, K.S.S. Seating System1068446-NLA See Note(s) A

Instruction Sheet, Slide Release1074563-NLA See Note(s) A

Instruction Sheet, S-Back1068862-NLAInstruction Sheet, Ulti-Mate Air Back1068863-NLA

See Note(s) AInstruction Sheet, K.S.S. Seating System1068446-NLA


NOTE:

NOTE: When adjusting or replacing parts, please refer to your Owner's Manual for assistance.Literature - Shape Sensor

Part Number DescriptionInstruction Sheet, 2.5 Base Assembly0900105-NLA

See Note(s) AInstruction Sheet, Shape Sensor System0900017-NLA


NOTE:



Packaging and LiteratureLiterature - Silhouette

Part Number DescriptionInstruction Sheet, Back Mounting Hardware0900110-NLA

Instruction Sheet, Extended Mounting Bracket0900123-NLAInstruction Sheet, Headrest Mounting Bracket0900111

Instruction Sheet, Lateral Supports0900103-NLA See Note(s) A

Instruction Sheet, Silhouette Installation1080355-NLAInstruction Sheet, Tray Mounting Hardware0900121-NLA

See Note(s) AInstruction Sheet, Quick Lock Clamp Assembly0900118-NLA

See Note(s) AInstruction Sheet, Universal Clamp Assembly0900120

A - Item is no longer available from Invacare Service Parts Department. Refer to the Invacare Website under "Product LiteratureSearch". Enter the part number in the "Keywords" field and download a free PDF version copy.

NOTE:

NOTE: When adjusting or replacing parts, please refer to your Owner's Manual for assistance.Literature - InTouch

Part Number DescriptionInstruction Sheet, Flovair1141447-NLA

See Note(s) AInstruction Sheet, Stabilite1141448-NLA

See Note(s) AInstruction Sheet, Propel Back1143199

A - Item is no longer available from the Invacare Service Parts Department. Refer to the Invacare Website under "Product LiteratureSearch". Enter the part number in the "Keywords" field and download a free PDF version copy.

NOTE:


Infinity Drop Base Hardware


Infinity Drop Base HardwareItem

Number Part Number DescriptionNoteQuantity Per

Package Assembly1084040 Kit, Drop Base Hooks and Hardware 1 11 A

Screw, Socket Button Head (1/4-20 x 5/8") 1 82Lockwasher, Split (1/4") 1 83Washer, Steel (5/16 x 3/4 x 1/16") 1 84Extrusion, Drop Base 1 45Cap, End 1 86Nut, Track 1 87Key, Allen (5/32") 1 18Key, Allen (1/8") 1 19Hook, Drop Base 1 410NLA - Screw, Socket Flat Head (#10-32 x 3/8") 1 811

1084152 Kit, Infinity Drop Hook 1 112 BKey, Allen (5/32") 1 18Key, Allen (1/8") 1 19Hook, Drop Base 1 410NLA - Screw, Socket Flat Head (#10-32 x 3/8") 1 811

See Chart Item #13 - Drop Base Pans 1 1131084039 Kit, Drop Base Clamp with Instruction Sheet 1 114 C

Clamps, Fixed Rail w/ Instruction Sheet (7/8" and 1" Tubing) (Pair)

2 115NLA - Clamps, Slide Release Rail w/ InstructionSheet (7/8" and 1" Tubing)

2 116NLA - Instruction Sheet, Slide Release 1 1

1084355 Kit, Infinity Drop Base Hardware 1 117 DScrew, Socket Button Head (1/4-20 x 5/8") 1 818Lockwasher, Split (1/4") 1 819Washer, Steel (5/16 x 3/4 x 1/16") 1 820NLA - Screw, Socket Flat Head (#10-32 x 3/8") 1 821

A - Includes: Items 2 - 11 B - Includes: Items 8 - 11 C - Includes: Items 15, 16 and Instruction Sheet D - Includes: Items 18 - 21

NOTE:

Item #13 - Drop Base Pans

16" Deep 18" Deep 20" Deep1084043-NLA1084042-NLA1084041-NLA14-16" Wide1084046-NLA1084045-NLA1084044-NLA17-19" Wide1084049-NLA1084048-NLA1084047-NLA20-22" Wide


Infinity Back Hardware and Accessories - Before 12/15/01Including UniBack, DualFlex and DualFlex Short



ItemNumber Part Number DescriptionNote

Quantity PerPackage Assembly

1084052 Kit, Back Hardware 1 11Bracket, Adjustment, Black 1 2Bracket, Width Adjustment, Black 1 2Screw, Socket Flat Head (#10-32 x 3/4") 1 2Screw, Socket Head (#10-32 x 5/8") 1 4

1084053-NLA NLA - Kit, Lateral Support - Upper (Mild) 1 12Lockwasher, External Tooth (#10) 1 4Support, Upper Lateral, Mild Contour 1 2Foam, Upper Lateral, Standard Contour 1 2NLA - Screw, Socket Head (#10-32 x 1/2") 1 4Washer, Bent (1/4") 1 4Cover, Upper Lateral, Mild 1 2

1084054 NLA - Kit, Lateral Support - Upper (Max) 1 12Lockwasher, External Tooth (#10) 1 4Support, Upper Lateral, Max Contour 1 2Foam, Upper Lateral, Max Contour 1 2NLA - Screw, Socket Head (#10-32 x 1/2") 1 4Washer, Bent (1/4") 1 4Cover, Upper Lateral, Max 1 2

1084055-NLA NLA - Kit, Lateral Support - Lower (Moderate) 1 12 ELockwasher, External Tooth (#10) 1 4Support, Lower Lateral, Mild Contour 1 2Foam, Support, Mild 1 2NLA - Screw, Socket Head (#10-32 x 1/2") 1 4Washer, Bent (1/4") 1 4Cover, Lower Lateral, Mild 1 2

1084056-NLA NLA - Kit, Lateral Support - Lower (Max) 1 12 FLockwasher, External Tooth (#10) 1 4Support, Lower Lateral, Max Contour 1 2Foam, Lower Lateral, Max Contour 1 2NLA - Screw, Socket Head (#10-32 x 1/2") 1 4Washer, Bent (1/4") 1 4Cover, Lower Lateral, Max 1 2

1087327 Cover, Upper Lateral, Mild 1 231087328 Cover, Upper Lateral, Max 1 231087325 Cover, Lower Lateral, Mild 1 23 E1087326 Cover, Lower Lateral, Max 1 23 F1084055 NLA - Kit, Lateral Support - Lower (Moderate) 1 14 G

Lockwasher, External Tooth (#10) 1 4Support, Lower Lateral, Mild Contour 1 2Foam, Support, Mild 1 2NLA - Screw, Socket Head (#10-32 x 1/2") 1 4





Washer, Bent (1/4") 1 4Cover, Lower Lateral, Mild 1 2

1084056 NLA - Kit, Lateral Support - Lower (Max) 1 14 GLockwasher, External Tooth (#10) 1 4Support, Lower Lateral, Max Contour 1 2Foam, Lower Lateral, Max Contour 1 2NLA - Screw, Socket Head (#10-32 x 1/2") 1 4Washer, Bent (1/4") 1 4Cover, Lower Lateral, Max 1 2

1087325 Cover, Lower Lateral, Mild 1 151087326 Cover, Lower Lateral, Max 1 25

1084057-NLA Kit, Cane Clamps 1 16Kit, Cane Clamp 1 1

1109936 Kit, DualFlex Hinge 1 17Wrench, Allen (3/16") 1 1Key, Hex (1/8") 1 1Hinge Assembly 1 1Spacer, Rubber Block 1 2Spacer, Steel (13/64 x 9/32 x 5/16") 1 4NLA - Screw, Socket Head (#10-32 x 3/4") 1 4Locknut (#10-32) 1 4

See Chart Item #8 - Back Cushion Assembly (Before 12/15/01) 1 181084356-NLA NLA - Kit, Back Mounting Hardware 1 19

Lockwasher, External Tooth (#10) 1 8Spacer, Rubber Block 1 4Screw, Socket Flat Head (#10-32 x 1/2") 1 8NLA - Screw, Socket Head (#10-32 x 1/2") 1 8Screw, Socket Flat Head (#10-32 x 3/4") 1 4Screw, Socket Head (#10-32 x 5/8") 1 16Key, Allen (5/32") 1 1Spacer, Steel (13/64 x 9/32 x 5/16") 1 8Washer, Bent (1/4") 1 8Key, Hex (1/8") 1 1

1084667-NLA NLA - Adapter, Headrest (Whitmyer) 1 1101086206-NLA NLA - Screw, Socket Flat Head (#10-32 x 3/4") 1 411 A,D1084412-NLA NLA - Screw, Socket Head (#10-32 x 1/2") 1 411 B,D

1084666 Kit, Headrest Clamp 1 112 C,HNLA - Instruction Sheet, Infinity Headrest Clamp 1 1NLA - Clamp, Universal Headrest 1 1



A - Before 3/1/00. B - After 2/29/00. C - Does not include item 10. D - Used for Headrest Clamp. E - Used on DualFlex Short, Mild Contour. F - Used on DualFlex Short, Max Contour. G - Used as Pelvic Stabilizer Pads (Lower) on some Back Models. H - Part number 1084380 is no longer available from the Invacare Service Parts Department. Refer to the Invacare Website

under "Product Literature Search". Enter the part number in the "Keywords" field and download a free PDF version copy.

NOTE:

Item #8 - Back Cushion Assembly (Before 12/15/01)

Short (14-1/4") Regular (17-1/4") Tall (20-1/4")1084060-NLA1084059-NLA1101202-NLADualFlex - Small (11")1084062-NLA1084061-NLA1101203-NLADualFlex - Medium (14")1084064-NLA1084063-NLA1101204-NLADualFlex - Large (17")1084066-NLA1084065-NLAN/AUniBack - Small (11")1084068-NLA1084067-NLAN/AUniBack - Medium (14")1084070-NLA1084069-NLAN/AUniBack - Large (17")

NOTE: Back Cushion Assembly includes the foam and cover.


Infinity Back Hardware and Accessories - After 12/15/01Including UniBack 10, DualFlex 10, and DualFlex Short





1110437 Kit, Back Hardware - Small 1 11 B,G,MPull Strap Assembly, Small 1 12Rivnut (#10-32) 1 23NLA - Screw, Socket Button Head (#10-32 x 3/8") 1 24NLA - Screw, Shoulder Slotted Head (3/8 x 5/16",5/16-18)

1 45NLA - Washer, Nylon (3/8 x 3/4 x 3/16") 1 86Arm Bracket Assembly - Right 1 17NLA - Screw, Socket Head (1/4-20 x 5/8") 1 88Plate, Width Adjustment 1 49Bracket, Width Adjustment 1 410Arm Bracket Assembly - Left 1 111

1110438-NLA NLA - kit, Strap with Hardware - Small 1 12 L1109564 Kit, Back Hardware - Medium 1 11 B,G,M

Pull Strap Assembly, Medium 1 12Rivnut (#10-32) 1 23NLA - Screw, Socket Button Head (#10-32 x 3/8") 1 24NLA - Screw, Shoulder Slotted Head (3/8 x 5/16",5/16-18)


1109565 Kit, Strap with Hardware - Medium 1 12 L1110439-NLA NLA - Kit, Back Hardware - Large 1 11 B,G,M

Pull Strap Assembly, Large 1 12Rivnut (#10-32) 1 23NLA - Screw, Socket Button Head (#10-32 x 3/8") 1 24NLA - Screw, Shoulder Slotted Head (3/8 x 5/16",5/16-18)


1110440-NLA NLA - Kit, Strap with Hardware - Large 1 12 L1109566 Kits, Lateral Support Pads - Upper, Reg. or Tall

(MIld Contour)1 112 B,H

Cushion, Upper Lateral Support - Mild Contour 1 213Bracket, Upper Lateral Support, Black - MildContour

1 214





Bracket, Upper Plate 1 215NLA - Screw, Socket Head (1/4-28 x 5/8") 1 416

1109567 Kits, Lateral Support Pads - Upper, Reg. or Tall(Max Contour)

1 112 B,HCushion, Upper Lateral Support - Maximum Contour 1 213Bracket, Upper Lateral Support, Black - MaximumContour

1 214Bracket, Upper Plate 1 215NLA - Screw, Socket Head (1/4-28 x 5/8") 1 416

1110933 Kit, Lateral Support Pads - Upper, Short (MildContour)

1 112 A,HCushion, Lower Lateral Support - Mild Contour 1 213Bracket, Lower Lateral Support, Black - MildContour


1110934 Kit, Lateral Support Pads - Upper, Short (MaximumContour)

1 112 A,HCushion, Lower Lateral Support - Maximum Contour 1 213Bracket, Lower Lateral Support, Black - MaximumContour


1109568 Kit, Pelvic Stabilizer Pads - Lower (Mild Contour) 1 117 B,ICushion, Lower Lateral Support - Mild Contour 1 218Bracket, Lower Lateral Support, Black - MildContour

1 219Bracket, Lower Plate, Black 1 220NLA - Screw, Socket Head (1/4-28 x 5/8") 1 421

1109569 Kit, Pelvic Stabilizer Pads - Lower (Max Contour) 1 117 B,ICushion, Lower Lateral Support - Maximum Contour 1 218Bracket, Lower Lateral Support, Black - MaximumContour

1 219Bracket, Lower Plate, Black 1 220NLA - Screw, Socket Head (1/4-28 x 5/8") 1 421

1109570 Kit, Cane Clamps 1 122 JCane Clamp Assembly - Right 1 123Cane Clamp Assembly - Left 1 124

1109936 Kit, DualFlex Hinge 1 125 KNLA - Screw, Socket Head (#10-32 x 3/4") 1 426Hinge Assembly 1 127Spacer, Rubber Block 1 228Spacer, Steel (13/64 x 9/32 x 5/16") 1 429Locknut (#10-32) 1 430Key, Hex (1/8") 1 1





Wrench, Allen (3/16") 1 11109581 Kit, Back Hardware 1 131 B,F

NLA - Screw, Socket Head (1/4-28 x 5/8") 1 832Bracket, Upper Plate 1 233Bracket, Lower Plate, Black 1 234NLA - Screw, Socket Head (1/4-20 x 5/8") 1 835Plate, Width Adjustment 1 436Wrench, Allen (3/16") 1 137Screw, Socket Head (#10-32 x 5/8") 1 838Spacer, Rubber Block 1 439Spacer, Steel (13/64 x 9/32 x 5/16") 1 840Key, Hex (1/8") 1 1

1084665 Kit, Headrest Adaptor (Whitmyer) 1 141 D,PNLA - Adapter, Headrest (Whitmyer) 1 142NLA - Clamp, Universal Headrest 1 143NLA - Instruction Sheet, Infinity Headrest Clamp 1 1

1084667-NLA NLA - Adapter, Headrest (Whitmyer) 1 1421084412-NLA NLA - Screw, Socket Head (#10-32 x 1/2") 1 443

1084666 Kit, Headrest Clamp 1 144 PNLA - Instruction Sheet, Infinity Headrest Clamp 1 1NLA - Clamp, Universal Headrest 1 1

1077144 Kit, Headrest - Small (HR01S) 1 145 E,N,OKit, Headrest Clamp, Lever Style 1 146NLA - Pad, Adjustable Headrest - Small (9" W x3-1/2" H)

1 1Bracket Assembly, Headrest Offset, Black 1 1NLA - Instruction Sheet, Infinity Headrest 1 1

1077145 Kit, Headrest - Large (HR02S) 1 145 E,N,OKit, Headrest Clamp, Lever Style 1 146NLA - Pad, Adjustable Headrest, Two-Step - Large(11" W x 6" H)

1 1Bracket Assembly, Headrest Offset, Black 1 1NLA - Instruction Sheet, Infinity Headrest 1 1

1077146 Kit, Headrest - 2-Step (HR03S) 1 145 E,N,OKit, Headrest Clamp, Lever Style 1 146Headrest, Two-Step (8-1/2" W x 5-1/2" H) 1 1Bracket Assembly, Headrest Offset, Black 1 1NLA - Instruction Sheet, Infinity Headrest 1 1

1077147 Kit, Headrest - Curved (HR04S) 1 145 E,N,OKit, Headrest Clamp, Lever Style 1 146Headrest, Curved (6" W x 7" H) 1 1Bracket Assembly, Headrest Offset, Black 1 1NLA - Instruction Sheet, Infinity Headrest 1 1





1072439-NLA NLA - Knob, Adjustment, Black (3/4" L Threads) 1 147 NSee Chart Item #48 - Back Cushion Assembly (After 12/15/01) 1 1481109571 Kit, Plates with Screws 1 149 C

A - Used on DualFlex Upper Short. B - Used on both UniBack and DualFlex Regular or Tall. C - Used on UniBack. D - Includes: Items 42, 43 and Instruction Sheet. E - DualFlex backs require an additional Headrest Clamp, Item #44. F - Includes: Items 32-40, 1/8" Hex Key, Bag and Carton ~ which contain enough parts to connect both Upper and Lower

Laterals, both the right and left sides. G - Includes: Items 2-11, Bag and Carton H - Includes: Items 13-16, 1" Hook Fastener, Bag and Carton. I - Includes: Items 18-21, 1" Hook Fastener, Bag and Carton. J - Includes: Items 23, 24 and Carton. K - Includes: Items 26-30, 3/16" Allen Wrench, 1/8" Hex Key, Bag and Carton. L - Includes: Items 2-4 M - Only one side of items 5, 6, 8, 9, & 10 are shown in the Exploded state for drawing clarity. N - Item 47 Adjustment Knob was replaced with an Adjustment Lever in Headrest Clamp Kit part # 0273100. The Lever is not

available as a separate part. The knob Part # 1072439 is sold separately and is interchangeable with the Lever. O - Part number 1079306 Instruction Sheet is no longer available from the Invacare Service Parts Department. Refer to the

Invacare Website under "Product Literature Search". Enter the part number in the "Keywords" field and download a free PDF version copy.

P - Part Number 1084380 is no longer available from the Invacare Service Parts Department. Refer to the Invacare Website under "Product Literature Search". Enter the part number in the "Keywords" field and download a free PDF version copy.

NOTE: To Mount a Back to a Chair, Items #1 (Back Hardware Kit), #22 (Cane Clamp Kit), and #31 (Back Mounting Hardware Kit) will need to be Ordered. NOTE: Individual components of the service parts KITS are non-serviceable except item #47 part number 1072439 Adjustment Knob.

NOTE:

Item #48 - Back Cushion Assembly (After 12/15/01)

Short (14" High) Regular (16" High) Tall (19" High)110957411095731109572DualFlex - Small (14-16"

Wide)110957711095761109575DualFlex - Medium (17-19"

Wide)110958011095791109578-NLADualFlex - Large (20-22"

Wide)1109603-NLA1109602N/AUniBack - Small (14-16"

Wide)1109605-NLA1109604-NLAN/AUniBack - Medium (17-19"

Wide)1109607-NLA1109606-NLAN/AUniBack - Large (20-22"

Wide)NOTE: Back Cushion Assembly includes the foam and cover.


Infinity LoBac Hardware and Accessories


Infinity LoBac Hardware and AccessoriesItem


Package Assembly1095171-NLA NLA - Cushion Assembly - Small 1 11 A1095172-NLA NLA - Cushion Assembly - Medium 1 11 A1095173-NLA NLA - Cushion Assembly - Large 1 11 A1095165-NLA NLA - Cushion - Small 1 121095166-NLA NLA - Cushion - Medium 1 121095167-NLA NLA - Cushion - Large 1 121095141-NLA NLA - Cushion Cover Assembly - Small 1 131095150-NLA NLA - Cushion Cover Assembly - Medium 1 131095151-NLA NLA - Cushion Cover Assembly - Large 1 13

1084411 Screw, Socket Flat Head (#10-32 x 1/2") 1 441095511-NLA NLA - Support, Lateral - Mild 1 251095512-NLA NLA - Support, Lateral - Max 1 25

1095143 Flap, Lower Assembly - Small 1 161095144 Flap, Lower Assembly - Medium 1 161095145 Flap, Lower Assembly - Large 1 16

1092433-NLA NLA - Cane Clamp Locking Assembly 1 27 B1077793-NLA NLA - Screw, Socket Head (1/4-20 x 3/4") 1 28

0052906 Screw, Socket Button Head (1/4-20 x 3/4") 1 491087558-NLA NLA - Spacer, Clamp, Black 1 2101095521-NLA NLA - Adjustable Bracket Assembly, Black - Right 1 1111095522-NLA NLA - Adjustable Bracket Assembly, Black - Left 1 1111096951-NLA NLA - Decal, Indexing 1 212

A - Includes items 2 and 3 B - Assembly Includes: 1 Lock, 1 Inner Clamp, 1 Outer Clamp, 2 Screws and 1 Spring Clip

NOTE:


Infinity Outer Cushion Covers - ViscoFoam & FloGel

Model ViscoFoam & FloGel Notes:For LCC Outer Covers, order ModelALC and reference special quote C -120409070205 for details and pricing

modification.LCC / (Size)Low Contour Outer Cover

For GCC Outer Covers, order ModelAGC and reference special quote C -120409070205 for details and pricing

modification.GCC / (Size)Gentle Contour Outer Cover

For MCC Outer Covers, order ModelAMC and reference special quote C -120409070205 for details and pricing

modification.MCC / (Size)Max Contour Outer Cover

Infinity Outer Cushion Covers - Airflo

Model AirFlo Notes:Replacement AirFlo Outer CushionCovers are found as Equipment on

the Price (Perscription) Forms.ALC / (Size)Low Contour Outer Cover

Replacement AirFlo Outer CushionCovers are found as Equipment on

the Price (Perscription) Forms.AGC / (Size)Gentle Contour Outer Cover

Replacement AirFlo Outer CushionCovers are found as Equipment on

the Price (Perscription) Forms.AMC / (Size)Max Contour Outer Cover

Infinity Outer Cushion Covers


#1 - Inner Cushion Covers

Dimensions LCLo Contour

GCGentle Contour

MCMax Contour1082248-NLA1082093-NLA1081937-NLA14" x 16"1082250-NLA1082095-NLA1081939-NLA14" x 18"1082262-NLA1082107-NLA1081951-NLA16" x 16"1082264-NLA1082109-NLA1081953-NLA16" x 18"1082266-NLA1082111-NLA1081955-NLA16" x 20"1082280-NLA1082125-NLA1081969-NLA18" x 16"1082282-NLA1082127-NLA1081971-NLA18" x 18"1082284-NLA1082129-NLA1081973-NLA18" x 20"1082298-NLA1082143-NLA1081987-NLA20" x 16"1082300-NLA1082145-NLA1081989-NLA20" x 18"1082302-NLA1082147-NLA1081991-NLA20" x 20"1082314-NLA1082159-NLA1082003-NLA22" x 18"1082316-NLA1082161-NLA1082005-NLA22" x 20"

Note: 1. All Dimensions are Width x Depth. 2. Quantity One per Package.

Infinity Inner Cushion CoversUse Quote #SM-090707111815 when ordering odd size Infinity Inner Cushion Covers.


InTouch Propel Back


InTouch Propel BackItem


Package Assembly1145048 Hardware, Propel Back, InTouch 1 11 A

Bolt, Carriage (1/4-20 x 1-1/4") 1 42Bolt, Hex Head Cap (1/4-20 x 3/4") 1 43Grip, Tube 1 44Grip, Tube Slide 1 45Bracket, Cane 1 16Washer 1 17Nut (1/4-20") 1 48Washer, Plain (1/4 x 9/16 x 1/16") 1 29Slide, T 1 210NLA - Wrench, Open End (3/8 - 7/16") 1 1Carton 1 4

See Chart #11 Outer Cover 1 111See Chart #12 Back Foam 1 112

A - Includes items 2-10, wrench and carton. NOTE:

#11 Outer Cover

Width Part Number113643916"-17" Wide113644018"-19" Wide113644120"-21" Wide

#12 Back Foam

Width Part Number113643416 - 17" Wide113643518 - 19" Wide113643620 - 21" Wide


Matrx PCS Back Mounting Hardware and Cane ClampHardware (14"-19" W)

(Matrx Brand name replaced InTouch as of 6/30/2011)



(Matrx Brand name replaced InTouch as of 6/30/2011)Item


Package Assembly1166010 Kit, Back Shell Mounting Hardware (14" - 19" W) 1 11 A

Nut, Weld (5/16-18 x 1-3/8" Spacing) 1 22Bracket, Angle, Adjustable (14-19" W) 1 23Plate, Washer 1 24Plate, Washer 1 25Screw, Socket, Button Head (5/16-18 x 5/8") 1 86

1163282 Kit, PCS Back Sleeve - Right 1 17 BLever, Adjustment, PCS Back - Right 1 1Pin, Lever 1 1Pin, Roll (3/32" x 5/8") 1 1NLA - Locknut (#10-24) 1 1Sleeve, Pin 1 1

1163283 Kit, PCS Back Sleeve - Left 1 17 BLever, Adjustment, PCS Back - Left 1 1Pin, Lever 1 1Pin, Roll (3/32" x 5/8") 1 1NLA - Locknut (#10-24) 1 1Sleeve, Pin 1 1

1162034 Kit, Clamp, Cane - Right 1 18 COuter Cane Clamp Assembly - Right 1 19Clamp, Cane, Inside 1 110Bar, Threaded Nut (1/4-20 x 2") 1 111Screw, Allen Head (1/4-20 x 1") 1 212Washer (1/4 x 1/2 x 1/16") 1 213

1162035 Kit, Cane Clamp - Left 1 18 COuter Cane Clamp Assembly - Left 1 19Clamp, Cane, Inside 1 110Bar, Threaded Nut (1/4-20 x 2") 1 111Screw, Allen Head (1/4-20 x 1") 1 212Washer (1/4 x 1/2 x 1/16") 1 213

A - Includes items 2-6. For use on tall and regular sizes. B - Item #7 PCS Back Sleeve Kit attaches to item #8 Cane Clamp Kit. C - Includes items 9-13.

NOTE:



(Matrx Brand name replaced InTouch as of 6/30/2011)



(Matrx Brand name replaced InTouch as of 6/30/2011)Item


Package Assembly1166011 Kit, Back Shell Mounting Hardware (20" - 24" W) 1 11 A

Nut, Weld (5/16-18 x 1-3/8" Spacing) 1 22Bracket, Angle, Adjustable (20-24" W) 1 23Plate, Washer 1 24Plate, Washer 1 25Screw, Socket, Button Head (5/16-18 x 5/8") 1 86

1163282 Kit, PCS Back Sleeve - Right 1 17 BLever, Adjustment, PCS Back - Right 1 1Pin, Lever 1 1Pin, Roll (3/32" x 5/8") 1 1NLA - Locknut (#10-24) 1 1Sleeve, Pin 1 1

1163283 Kit, PCS Back Sleeve - Left 1 17 BLever, Adjustment, PCS Back - Left 1 1Pin, Lever 1 1Pin, Roll (3/32" x 5/8") 1 1NLA - Locknut (#10-24) 1 1Sleeve, Pin 1 1

1162034 Kit, Clamp, Cane - Right 1 18 COuter Cane Clamp Assembly - Right 1 19Clamp, Cane, Inside 1 110Bar, Threaded Nut (1/4-20 x 2") 1 111Screw, Allen Head (1/4-20 x 1") 1 212Washer (1/4 x 1/2 x 1/16") 1 213

1162035 Kit, Cane Clamp - Left 1 18 COuter Cane Clamp Assembly - Left 1 19Clamp, Cane, Inside 1 110Bar, Threaded Nut (1/4-20 x 2") 1 111Screw, Allen Head (1/4-20 x 1") 1 212Washer (1/4 x 1/2 x 1/16") 1 213

A - Includes items 2-6. For use on regular and tall sizes. B - Item #7 PCS Back Sleeve Kit attaches to item #8 Cane Clamp Kit. C - Includes items 9-13.

NOTE:


Matrx PCS Back Mounting Hardware - Tilt & Recline Only(Matrx Brand name replaced InTouch as of 6/30/2011)


Matrx PCS Back Mounting Hardware - Tilt & Recline Only(Matrx Brand name replaced InTouch as of 6/30/2011)



1164440 Kit, Back Mounting Hardware - Tilt & Recline Only 1 11 A,BBracket, Fixed, Black 1 22Plate, Washer 1 23T-Nut (1/4-20) 1 44Screw, Socket, Button Head (5/16-18 x 5/8") 1 45Nut, Weld (5/16-18 x 1-3/8" Spacing) 1 26NLA - Screw, Hex Head (1/4-20 x 1-1/2") 1 47Washer (1/4 x 1/2 x 1/16") 1 48

A - For use on Tilt & Recline only. Not retrofitable with Contoura. B - Includes items 2-8.

NOTE:


Matrx PCS Back Upholstery Assemblies(Matrx Brand name replaced InTouch as of 6/30/2011)

Regular Back

Width x Heighth Part Number116441214" W x 15" H116441315" W x 15" H116441416" W x 16" H116441517" W x 16" H116441618" W x 16" H116441719" W x 16" H116441820" W x 16" H116441921" W x 16" H116442022" W x 16" H116442123" W x 16" H116442224" W x 16" H


Matrx PCS Back Upholstery Assemblies(Matrx Brand name replaced InTouch as of 6/30/2011)

Tall Back

Width x Heighth Part Number116442314" W x 19" H116442415" W x 19" H116442516" W x 20" H116442617" W x 20" H116442718" W x 20" H116442819" W x 20" H116442920" W x 20" H116443021" W x 20" H116443122" W x 20" H116443223" W x 20" H116443324" W x 20" H




1164441 Kit, Wire Tray Mounting Hardware 1 11 ACover, MK6i Connector Bracket 1 12Bracket, MK6i Connector, Black 1 13Bracket, Wire Tray, Upper 1 14Bracket, Wire Tray, Lower 1 15Screw, Socket Button Head (1/4-20 x 1/2") 1 46Screw, Thumb (#10-32 x 1/2") 1 17Insert, Threaded (#10-32) 1 18Locknut (1/4-20) 1 69Bolt, Round Head, Square Neck (1/4-20 x 1/2") 1 210Carton, Shipper 1 1

A - For use with MK6i Electronics only. Carton not shown. NOTE:

Matrx PCS Back Wire Tray(Matrx Brand name replaced InTouch as of 6/30/2011)


Matrx PCS Back Headrest Clamp Kit - Lever Style(Matrx Brand name replaced InTouch as of 6/30/2011)


Matrx PCS Back Headrest Clamp Kit - Lever Style(Matrx Brand name replaced InTouch as of 6/30/2011)



1160332 Kit, Headrest Clamp, Knob Style 1 11 A1072439-NLA NLA - Knob, Adjustment, Black (3/4" L Threads) 1 120237522-NLA NLA - Clamp, Small Top Half 1 13 B

1025736 Locknut (1/4-20) 1 240237422-NLA NLA - Clamp, Small Bottom Half 1 15 B

1009838 Screw, Socket Button (1/4-20 x 3/4") 1 26A - Includes items 2-6. B - Clamp is no longer available individually. See Headrest Clamp Kit item #1.

NOTE:


Matrx PCS Lateral Support(Matrx Brand name replaced InTouch as of 6/30/2011)


Matrx PCS Lateral Support(Matrx Brand name replaced InTouch as of 6/30/2011)



1164438 Kit, Lateral Support w/ Small Pad (Pair) 1 11 ANLA - Screw, Socket Head (1/4-20 x 1/2") 1 42Washer (1/4 x 1/2 x 1/16") 1 43Lateral, w/ Foam - Small 1 24Upholstery Assembly, Lateral w/ Label - Small 1 15Upholstery Assembly, Lateral - Small 1 15

1164439 Kit, Lateral Support w/ Large Pad (Pair) 1 11 ANLA - Screw, Socket Head (1/4-20 x 1/2") 1 42Washer (1/4 x 1/2 x 1/16") 1 43Lateral, w/ Foam - Large 1 24Upholstery Assembly, Lateral w/ Label - Large 1 15Upholstery Assembly, Lateral - Large 1 15

1164820 Lateral, w/ Foam - Large 1 241164821 Lateral, w/ Foam - Small 1 241165480 Upholstery Assembly, Lateral w/ Label - Small 1 25 B1165482 Upholstery Assembly, Lateral w/ Label - Large 1 25 B

A - Includes items 2-5. B - Upholstery Assembly w/o a Label is not saleable.

NOTE:


InTouch TargIT Replacement CoversInner Covers

Cushion Size Gentle Contour Max Contour1131051113103916 x 16"1131052113104016 x 18"1131053113104118 x 16"1131054113104218 x 18"1131055113104320 x 16"1131056113104420 x 18"

N/A113104522 x 16"N/A113104622 x 18"N/A113104722 x 20"N/A113104824 x 16"N/A113104924 x 18"N/A113105024 x 20"

88811310368881131035Builder Sizes


InTouch TargIT Replacement CoversOuter Covers

Cushion Size Gentle Contour Max Contour1131069113105716 x 16"1131070113105816 x 18"1131071113105918 x 16"1131072113106018 x 18"1131073113106120 x 16"1131074113106220 x 18"

N/A113106322 x 16"N/A113106422 x 18"N/A113106522 x 20"N/A113106624 x 16"N/A113106724 x 18"N/A113106824 x 20"

88811310388881131037Builder Sizes


InTouch Flovair Cushions discontinued (After 11/20/11)NOTE: InTouch Flovair Replacement Outer Covers (Before 11/21/11) will work for Intouch Stabilite

Max/Gentle Contour Cushions (Before 11/21/11) as well.Size (Width x Depth) Gentle Contour Maximum Contour

1144197114418516" x 16"1144198114418616" x 18"1144199114418718" x 16"1144200114418818" x 18"1153843115384118" x 20"1144201114418920" x 16"1144202114419020" x 18"1153844115384220" x 20"

N/A114419122" x 16"N/A114419222" x 18"N/A114419322" x 20"N/A114419424" x 16"N/A114419524" x 18"N/A114419624" x 20"

88811442048881144203Builder or Odd Sizes

InTouch Flovair Replacement Outer Covers (Before11/21/11)


Matrx Flovair Cushions introduced (After 11/20/11)

Size (Width x Depth) Gentle Contour Maximum Contour1173671117365716" x 16"1173672117365816" x 18"1175009117500816" x 20"1173673117365918" x 16"1173674117366018" x 18"1173675117366118" x 20"1173676117366220" x 16"1173677117366320" x 18"1173678117366420" x 20"1173681117366522" x 16"1173682117366622" x 18"1173683117366722" x 20"11736848881173679

22" x 22" See Note(s) B, A1173685117366824" x 16"1173686117366924" x 18"1173687117367024" x 20"11736888881173679

24" x 22" See Note(s) B, A8881173680

8881173679

Builder or Odd Sizes See Note(s) B See Note(s) BA - Matrx Flovair Gentle Contour sizes 22" x 22" and 24" x 22" must be ordered as a Builder Size through the Configurator also. B - Reference special quote #SM - 090313042351 when ordering.

NOTE:

Matrx Flovair Replacement Outer Covers (After 11/20/11)


InTouch Stabilite Cushions discontinued (After 11/20/11)

Size (Width x Depth) Gentle Contour Maximum Contour1144217114420516" x 16"1144218114420616" x 18"1144219114420718" x 16"1144220114420818" x 18"11538471153845-NLA18" x 20"1144221114420920" x 16"1144222114421020" x 18"

1153848-NLA115384620" x 20"N/A114421122" x 16"N/A114421222" x 18"N/A114421322" x 20"N/A114421424" x 16"N/A114421524" x 18"N/A114421624" x 20"


InTouch Stabilite Replacement Outer Covers (Before11/21/11)


Matrx Stabilite Cushions introduced (After 11/20/11)

Size (Width x Depth) Part Number117340114" x 14"117340214" x 16"117340314" x 18"117340416" x 16"117340516" x 18"117340616" x 20"117340718" x 16"117340818" x 18"117340918" x 20"117341020" x 16"117341120" x 18"117341220" x 20"117341320" x 22"117341422" x 16"117341522" x 18"117341622" x 20"117341722" x 22"117341824" x 16"117341924" x 18"117342024" x 20"117342124" x 22"


Matrx Stabilite Replacement Outer Covers (After 11/20/11)


Size (Width x Depth) Stabilite OM Outer Cover116066116" x 16"116066216" x 18"116066316" x 20"116066418" x 16"116066518" x 18"116066618" x 20"116066720" x 16"116066820" x 18"116066920" x 20"116067122" x 16"116067222" x 18"116067322" x 20"116067524" x 16"116067624" x 18"116067724" x 20"


InTouch Stabilite OM Replacement Outer Covers


InTouch Stabilite OM Obliquity Inserts


InTouch Stabilite OM Obliquity InsertsNOTE: The right and left side obliquity inserts are only available in pairs.

Cushion Width Stabilite OM Obliquity Inserts (Pair Only)116091714" Wide116091815" Wide116091916" Wide116092017" Wide116092118" Wide116092219" Wide116092320" Wide116092421" Wide116092522" Wide116092623" Wide116092724" Wide


InTouch Stabilite OM Removable Leg Wedge


InTouch Stabilite OM Removable Leg WedgeItem


Package Assembly1153420 Kit, Wedge, Removable InTouch Stabilite & Flovair 1 11 A

Wedge, Foam 2 12Hook Fastener with Adhesive Back (1" W) 1 13Loop, Adhesive Back (1") 1 14Instruction Sheet, RLW Removable Leg Wedge 1 15

A - Includes: Items 2-5 (Item 5 is not shown). Cushion width is required when ordering item 1 part #1153420. NOTE:


Matrx Stabilite & Flovair Removable Leg Wedge(Matrx Brand name replaced InTouch as of 11/21/2011)


Matrx Stabilite & Flovair Removable Leg Wedge(Matrx Brand name replaced InTouch as of 11/21/2011)



1153420 Kit, Wedge, Removable InTouch Stabilite & Flovair 1 11 AWedge, Foam 2 12Hook Fastener with Adhesive Back (1" W) 1 13Loop, Adhesive Back (1") 1 14Instruction Sheet, RLW Removable Leg Wedge 1 15

A - Includes: Items 2-5 (Item 5 is not shown). Cushion width is required when ordering item 1 part #1153420. NOTE:


Part NumberQuantity One per Package

Part NumberQuantity 10 per Package Description (Width x Depth)

Cover, Inner Incontinence (14-19" Wx 14-18" D)11458721142584




InTouch Stabilite OM Replacement Inner Covers(Incontinence)


InTouch Stabilite & Flovair Replacement Inner Covers (Incontinence)(Before 11/21/2011)

Part NumberQuantity One per Package

Part NumberQuantity 10 per Package Description (Width x Depth)





Matrx Stabilite & Flovair Replacement Inner Covers (Incontinence)(After 11/20/2011)

Size (Width x Depth) StabiliteQuantity One per Package

Flovair Gentle ContourQuantity One per Package

Flovair Maximum ContourQuantity One per Package

N/AN/A117448814" x 14"N/AN/A117448914" x 15-16"N/AN/A117449014" x 17-18"

11745081174491117449116" x 15-16"11745091174492117449216" x 17-18"11745101174493117449316" x 19-20"11745111174494117449418" x 15-16"11745121174495117449518" x 17-18"11745131174496117449618" x 19-20"11745141174497117449720" x 15-16"11745151174498117449820" x 17-18"11745161174499117449920" x 19-20"11745171174500117450022" x 16"11745181174501117450122" x 17-18"11745191174502117450222" x 19-20"11745201174503117450322" x 21-22"11745211174504117450424" x 16"11745221174505117450524" x 17-18"11745231174506117450624" x 19-20"11745241174507117450724" x 21-22"

Stabilite & Flovair Replacement Inner Covers(Incontinence)


Part Number DescriptionOverlay, Air (14-19" W)

1142065 See Note(s) B, AOverlay, Air (20-24" W)

1142066 See Note(s) BA - 14" wide applies to Stabilite OM Cushion only. B - Air Overlays are optional on Stabilite OM Cushions and standard on Stabilite Cushions

NOTE:

Matrx Stabilite and InTouch Stabilite OM Replacement AirOverlays

(Matrx Brand name replaced InTouch as of 11/21/2011. Brand changeexcludes Stabilite OM Air Overlays.)


Part Number DescriptionGel with Air Overlay (15 - 19" W x 15 - 18" D)1142509Gel with Air Overlay (15 - 19" W x 19 - 20" D)1142510Gel with Air Overlay (20 - 24" W x 15 - 18" D)1143740Gel with Air Overlay (20 - 24" W x 19 - 22" D)1143741

Matrx Flovair Replacement Gel/Air Overlays(Matrx Brand name replaced InTouch as of 11/21/2011)


Infinity Leg Wedges, FloGel, and Visco Foam Inserts

Item #2 Visco Foam Insert

Before 4/7/03 After 4/6/0311090781087377-NLA13-14" Wide Cushion11090791087237-NLA15-16" Wide Cushion11090801087237-NLA17-22" Wide Cushion

Item #2 FloGel Insert

Before 4/7/03 After 4/6/0311090751087389-NLA13-14" Wide Cushion11090761081585-NLA15-16" Wide Cushion11090771081585-NLA17-22" Wide Cushion


Infinity Leg Wedges, FloGel, and Visco Foam InsertsItem #3 Leg Wedge



See Chart #2 Infinity FloGel Insert 1 12See Chart #2 Infinity Visco Foam Insert 1 121084038 Wedge, Foam with Hook & Loop Fastener

(10" L)1 23


Item #1

Dimention LCLo Contour

GCGentle Contour

MCMax Contour

10990501099062109907514" W x 16" D10990511099063109907614" W x 18" D

1098194-NLA1099064109907716" W x 16" D10990521099065109907816" W x 18" D10990531099066109907916" W x 20" D10990541099067109908018" W x 16" D10990551099068109908118" W x 18" D10990561099069109908218" W x 20" D10990571099070109908320" W x 16" D10990581099071109908420" W x 18" D10990591099072109908520" W x 20" D10990601099073109908622" W x 18" D10990611099074109908722" W x 20" D

8881101557-NLA8881101557-NLA8881101557-NLAOdd Sizes See Note(s) A

A - Order as a Special Modification. Specify width and depth of cushion. NOTE:

Matrx Airflo Inner Covers(Matrx Brand name replaced Infinity as of 4/19/2011)




1098216 Inserts, AirFlow (14" W) 1 121098215 Inserts, AirFlow (15 - 16" W) 1 121098217 Inserts, AirFlow (17 - 18" W) 1 121098238 Inserts, AirFlow (19 - 20" W) 1 121098239 Inserts, AirFlow (21 - 22" W) 1 121098191 Inflation Bulb Assembly 1 131098192 Kit, Repair with 3 Patches 1 1A

A - Not Shown NOTE:

Matrx Airflo Inserts and Accessories(Matrx Brand name replaced Infinity as of 4/19/2011)


Contoura SeatingSeat Cushion Assembly

#1 Contoura Seat Cushion AssemblyNOTE: To order a Mesh Contoura Seat Cushion Assembly, please use quote # SM-100908010838 when

placing your order.Chair Width 21" Deep 22" Deep16" Deep 17" Deep 18" Deep 19" Deep 20" Deep

N/AN/A1132986

1132985

1132984

1132983

1132982 16" Wide See Note(s) A See Note(s) A See Note(s) A See Note(s) A See Note(s) A

N/AN/A1132991

1132990

1132989

1132988

1132987 18" Wide See Note(s) A See Note(s) A See Note(s) A See Note(s) A See Note(s) A

1132998

1132997

1132996

1132995

1132994

1132993

1132992 20" Wide See Note(s) A See Note(s) A See Note(s) A See Note(s) A See Note(s) A See Note(s) A See Note(s) A

1133003

1133002

1133001

1133000

1132999 N/AN/A22" Wide See Note(s) A See Note(s) A See Note(s) A See Note(s) A See Note(s) A

1133008

1133007

1133006

1133005

1133004 N/AN/A24" Wide See Note(s) A See Note(s) A See Note(s) A See Note(s) A See Note(s) A

A - Cushion Foam is not available separately. NOTE:



#2 Contoura Seat Cushion Cover Before 12/16/10

Chair Width 21" Deep 22" Deep16" Deep 17" Deep 18" Deep 19" Deep 20" DeepN/AN/A1132957-NLA1132956-NLA1132955-NLA1132954-NLA1132953-NLA16" WideN/AN/A1132962-NLA1132961-NLA1132960-NLA1132959-NLA1132958-NLA18" Wide

1132969-NLA1132968-NLA1132967-NLA1132966-NLA1132965-NLA1132964-NLA1132963-NLA20" Wide1132974-NLA1132973-NLA1132972-NLA1132971-NLA1132970-NLAN/AN/A22" Wide1132979-NLA1132978-NLA1132977-NLA1132976-NLA1132975-NLAN/AN/A24" Wide

Contoura Seat Cushion Covers listed on this chart are No Longer Available. Refer to the Contoura Seat Cushion Covers dated after 12/15/10as a direct replacement.



#2 Contoura Seat Cushion Cover After 12/15/10

Chair Width 21" Deep 22" Deep16" Deep 17" Deep 18" Deep 19" Deep 20" DeepN/AN/A1167376116737511673741167373116737216" WideN/AN/A1167381116738011673791167378116737718" Wide

116738811673871167386116738511673841167383116738220" Wide11673931167392116739111673901167389N/AN/A22" Wide11673981167397116739611673951167394N/AN/A24" Wide

#2 Contoura Seat Cushion Cover, Mesh (CTBMSH)

Chair Width 21" Deep 22" Deep16" Deep 17" Deep 18" Deep 19" Deep 20" DeepN/AN/A1164212116421111642101164209116420816" WideN/AN/A1164217116421611642151164214116421318" Wide

116422411642231164222116422111642201164219116421820" Wide11642291164228116422711642261164225N/AN/A22" Wide11642341164233116423211642311164230N/AN/A24" Wide


Dimensions Part Number1084725-NLA14" W x 14" D1084726-NLA14" W x 16" D

1084727-NLA16" W x 16" D1084728-NLA16" W x 18" D

1060413-NLA17" W x 16" D1060414-NLA17" W x 18" D

1084729-NLA18" W x 16" D1084730-NLA18" W x 18" D1064423-NLA18" W x 20" D

1060417-NLA19" W x 16" D1060418-NLA19" W x 18" D

1084731-NLA20" W x 16" D1084732-NLA20" W x 18" D1077351-NLA20" W x 20" D

Personal Seat Covers




1079648-NLA NLA - Fluid Bag Assembly 1 11

Personal Seat Fluid Bag


Drop Base Mounting HardwareNOTE: Base is Shown for Reference only.


Drop Base Mounting HardwareItem


Package Assembly1044896-NLA NLA - Kit, Adjustable Mounting Hook

(7/8" Tubing)1 11 B

NLA - Screw, Socket Flat Head (1/4-20 x 7/8") 1 82Clamps, Adjustable Mounting (7/8") 1 43Locknut (1/4-20) 1 84NLA - Instruction Sheet 1 1

1044899 NLA - Kit, Adjustable Mounting Hook (1" Tubing) 1 11 BNLA - Screw, Socket Flat Head (1/4-20 x 7/8") 1 82Clamps, Adjustable Mounting (1") 1 43Locknut (1/4-20) 1 84NLA - Instruction Sheet 1 1

MC054A-NLA NLA - Kit, Adjustable Mounting Hook (7/8" Tubing)

1 111081518-NLA NLA - Kit, Adjustable Mounting Hook, Heavy Duty

(7/8" Tubing)1 1A

1081521-NLA NLA - Kit, Adjustable Mounting Hook, Heavy Duty (1" Tubing)

1 1A1078054-NLA NLA - Crossbrace, Heavy Duty (20" W) 1 2A

A - Not Shown B - Part #1037987 is no longer available from the Invacare Service Parts Department. Refer to the Invacare Website under

"Product Literature Search". Enter the part number in the "Keywords" field and download a free PDF version copy. NOTE:


Personal Back, Personal Back Plus, Matrx PersonalBack10 Reg./Tall, Matrx Personal Back10 Plus Reg./Tall -

For Round Canes(Matrx added to Brand name as of 6/30/2011)

For Matrx PB models, see page titled "Matrx PB Back, Matrx PB Deep Back, Matrx PB HD Back and MatrxPB Deep HD Back".







MB-50 Kit, Top Mounting Hardware 1 11MB-54 Kit, Bottom Mounting L-Pin Assembly 1 12 B

MB12A-NLA NLA - Kit, Personal Back Hardware 1 13 B1045697-NLA NLA - Kit, Angle Brackets with Hardware 1 14

1088055 Package, Inserts, Clamp, Black (7/8" Tubing) 4 151049522-NLA NLA - Kit, Headrest Reinforcement

(Includes: (4) Locknuts (#10-32), (4) Screws(#10-32 x 1/2"), (1) Headrest Plate - Black, andInstruction Sheet)

1 16

0273100 Kit, Headrest Clamp, Lever Style 1 17 E0237422-NLA NLA - Clamp, Small Bottom Half 1 18 F0237522-NLA NLA - Clamp, Small Top Half 1 19 F1072439-NLA NLA - Knob, Adjustment, Black (3/4" L Threads) 1 110

0288706 Screw, Socket, Flat Head (1/4-20 x 1") 1 2111025736 Locknut (1/4-20) 1 2121045690 Lateral Pad Assembly - Large/Right (5-41/64 W x

15-21/32" L)1 113 J,K

1045691 Lateral Pad Assembly - Large/Left (5-41/64 W x15-21/32" L)

1 113 J,K1045833-NLA NLA - Pad, Lateral Assembly

- Small, Right(4-1/4 W x 10-3/8" L)

1 113 I

1045834-NLA NLA - Pad, Lateral Assembly- Small, Left(4-1/4 W x 10-3/8" L)

1 113 I

1045677 T-Nut, Capped 1 2141045667 Cap, End, Nylon, Black 1 215

1045669-NLA NLA - Tip, Foam, Black 1 2161118404 Kit, L-Pin, Bottom Mounting Assembly (Pair)

(Includes: a pair of L-Pin Brackets, Poly Bag, andCarton.)

1 117 C

1125366 Kit, L-Pin, Bottom Mounting Assembly (13 - 26" W)(Pair)

1 117 D1116448 Kit, Personal Back10 Hardware (13-20" Widths) 1 1181124469 Kit, Personal Back10 Hardware (22-26" Widths) 1 118

See Chart Item #19 - Panel Assembly (Shell) 1 119See Chart Item #20 Foam, Personal Back10 and Personal

Back10 Plus1 120

1045692 Support, Lumbar - Medium 1 1A,G1084410-NLA NLA - Support, Lumbar - Large 1 1A,H







1060985-NLA NLA - Instruction Sheet, Personal Back MountingHardware

1 1A,LSee Chart Outer Cover, Personal Back and Personal Back

Plus1 1A

See Chart Outer Cover, Personal Back10 and PersonalBack10 Plus

1 1AA - Not Shown B - Manufactured before 2/8/03. C - Manufactured between 2/10/03 and 8/17/03. D - Manufactured after 8/18/03. E - Includes items 8-12. Item 10 Adjustment Knob was replaced with an Adjustment Lever. The Lever is not available as a

separate part. The Knob part #1072439 is still sold separately and is interchangeable with the lever. F - Clamp is no longer available individually. See Headrest Clamp Kit item #7. G - Used for 13", 14" and 15" wide back models. H - Used for 16", 17", 18", 19" and 20" wide back models. I - Small Laterals are no longer available for any of the Personal Back models listed on this page. J - Large Lateral Pad assemblies shown are for the Personal Back 10 and the Personal Back 10 Plus but can be used on the

Personal Back and the Personal Back Plus. K - See the Matrx Seating Series for Laterals that fit newer model Matrx Posture Back. L - Item is no longer available from the Invacare Service Parts Department. Refer to the Invacare Website under "Product

Literature Search". Enter the part number in the "Keywords" field and download a free PDF version copy.

NOTE:

Item #19 - Panel (Shell) AssemblySize Regular, Regular Regular, Plus Tall, Regular Tall, Plus

1115904-NLA1115896-NLA1115888-NLA1115880-NLA13"1115905-NLA1115897-NLA1115889-NLA1115881-NLA14"1115906-NLA1115898-NLA1115890-NLA1115882-NLA15"1115907-NLA1115899-NLA1115891-NLA1115883-NLA16"1115908-NLA1115900-NLA1115892-NLA1115884-NLA17"1115909-NLA1115901-NLA1115893-NLA1115885-NLA18"1115910-NLA1115902-NLA1115894-NLA1115886-NLA19"1115911-NLA1115903-NLA1115895-NLA1115887-NLA20"1124369-NLA1124366-NLA1124363-NLA1124360-NLA22"1124370-NLA1124367-NLA1124364-NLA1124361-NLA24"1124371-NLA1124368-NLA1124365-NLA1124362-NLA26"




For Matrx PB models, see page titled "Matrx PB Back, Matrx PB Deep Back, Matrx PB HD Back and MatrxPB Deep HD Back".Item #20 Foam

Personal Back10 and Personal Back10 PlusDescription HR Foam Visco Foam

1116469111645313-14" Wide Regular Plus

1116470111645415-16" WideRegular Plus



1124509-NLA1124497-NLA22" WideRegular Plus



1116473111645713-14" WideRegular

1116474111645815-16" WideRegular

1116475111645917-18" WideRegular

1116476111646019-20" WideRegular

1124506-NLA1124494-NLA22" WideRegular



1116477111646113-14" WideTall Plus

1116478111646215-16" WideTall Plus

1116479111646317-18" WideTall Plus

1116480111646419-20" WideTall Plus

1124515-NLA1124503-NLA22" WideTall Plus

1124516-NLA1124504-NLA24" WideTall Plus




For Matrx PB models, see page titled "Matrx PB Back, Matrx PB Deep Back, Matrx PB HD Back and MatrxPB Deep HD Back".Item #20 Foam

Personal Back10 and Personal Back10 Plus

Description HR Foam Visco Foam1124517-NLA1124505-NLA26" Wide

Tall Plus1116481111646513-14" Wide

Tall Regular1116482111646615-16" Wide



Tall Regular1124512-NLA1124500-NLA22" Wide



Tall Regular





Outer Upholstery CoverPersonal Back10 and Personal Back10 Plus

Back Width Regular Tall Regular Regular Plus Tall Plus111579511157791115803111578713"111579611157801115804111578814"111579711157811115805111578915"111579811157821115806111579016"111579911157831115807111579117"111580011157841115808111579218"111580111157851115809111579319"111580211157861115810111579420"112479311247871124790112478422"112479411247881124791112478524"112479511247891124792112478626"

Outer CoverPersonal Back and Personal Back Plus

Chair Width Regular Tall Regular Plus Tall Plus1084720-NLA1084719-NLA1084712-NLA1084711-NLA16"1084722-NLA1084721-NLA1084714-NLA1084713-NLA18"1084724-NLA1084723-NLA1084716-NLA1084715-NLA20"

Note: Odd sizes must be ordered as a builder.


Matrx Personal Back10 (TALL Reg./TALL Plus) Hardware -For Extruded Canes

Formula TRE Conventional Recline w/ BPO Option(Matrx added to Brand name as of 6/30/2011)


Matrx Personal Back10 (TALL Reg./TALL Plus) Hardware -For Extruded Canes

Formula TRE Conventional Recline w/ BPO Option(Matrx added to Brand name as of 6/30/2011)



1132748 Kit, Personal Back10 Tall Back Mounting HardwareFor Conventional Recline 16-20" Wide

1 11 AWasher (1/4 x 1/2 x 1/16") 1 42Screw, Hex Head w/ Patch (1/4-20 x 1/2") 1 43Bracket, Personal Back10 Tall, For ConventionalRecline, Black (16 - 20" W)

1 24T-Nut (1/4-20) 1 45

1133122 Kit, Personal Back10 Tall Back Mounting HardwareFor Conventional Recline 20-24" Wide

1 11 AWasher (1/4 x 1/2 x 1/16") 1 42Screw, Hex Head w/ Patch (1/4-20 x 1/2") 1 43Bracket, Personal Back10 Tall, For ConventionalRecline, Black (20 - 24" W)

1 24T-Nut (1/4-20) 1 45

A - Includes items 2-5 and is used for a Personal Back10 Tall (Regular or Plus) model only NOTE:


Directions for Locating Replacement Components

NOTE:Refer to the Seating and Positioning Price List (Form # 11-036) located at www.invacare.com. for available

replacement components on the following models:

Matrx PB BackMatrx PB Deep BackMatrx PB HD Back

Matrx PB Deep HD Back

NOTE:The Matrx PB Back models are not associated with the Personal Back, Matrx Personal Back 10 or Matrx Personal

Back 10 Plus models.

Matrx PB Back, Matrx PB Deep Back, Matrx PB HD Backand Matrx PB Deep HD Back


Comfort-Mate HardwareItem


Package Assembly1063289 Hooks, Flush Mount with Hardware (Pair) 2 211063290 Hooks (1" Drop, 7/8" Tubing) (Pair) 2 211063291 Hooks (1" Drop, 1" Tubing) (Pair) 2 211063292 Hooks (2" Drop, 7/8" Tubing) (Pair) 2 211063293 Hooks (2" Drop, 1" Tubing) (Pair) 2 211063294 Hooks (3" Drop, 7/8" Tubing) (Pair) 2 211063295 Hooks (3" Drop, 1" Tubing) (Pair) 2 211063327 Clamps, Quick Release Rail (7/8" and 1" Tubing)

(Pair)2 22

4 ea. Attaching Screws included with item #1.

Comfort-Mate Hardware


Part Number Dimension14" W x 14" D109388714" W x 16" D109388816" W x 16" D109388916" W x 20" D109389118" W x 16" D109389218" W x 18" D109389318" W x 20" D109389420" W x 16" D109389520" W x 18" D109389620" W x 20" D109389722" W x 18" D109389822" W x 20" D1093899

Comfort-Mate Extra Cushion Builder(Odd Sizes order as a Special)8881094394

Comfort-Mate Extra Cushion Outer Covers (CMEXC)


Part Number Dimension14" W x 14" D1091912-NLA14" W x 16" D1091918-NLA16" W x 16" D1091923-NLA16" W x 18" D1091928-NLA18" W x 16" D1091938-NLA18" W x 18" D1091943-NLA20" W x 16" D1091953-NLA20" W x 18" D1091958-NLA

Inner Cover Builder(Order odd sizes as a special)1093492-NLA

Comfort-Mate Extra Base Inner Covers




1063289 Hooks, Flush Mount with Hardware (Pair) 2 211063290 Hooks (1" Drop, 7/8" Tubing) (Pair) 2 211063291 Hooks (1" Drop, 1" Tubing) (Pair) 2 211063292 Hooks (2" Drop, 7/8" Tubing) (Pair) 2 211063293 Hooks (2" Drop, 1" Tubing) (Pair) 2 211063327 Clamps, Quick Release Rail (7/8" and 1" Tubing)

(Pair)2 22

4 ea. Attaching Screws included with Item #1

Comfort-Mate Extra Base Hardware


Part Numbers Dimensions14" W x 14" D1093901-NLA14" W x 16" D1093902-NLA16" W x 16" D1093903-NLA16" W x 18" D1093904-NLA16" W x 20" D1093905-NLA18" W x 16" D1093906-NLA18" W x 18" D1093907-NLA18" W x 20" D1093908-NLA20" W x 16" D1093909-NLA20" W x 18" D1093910-NLA

See Note(s) A20" W x 20" D1093911-NLA22" W x 18" D1093912-NLA22" W x 20" D1093913-NLA

Outer Covers (CMBXC) Builder(Order odd sizes as a special)8881093914-NLA

A - This part comes with drawstrings. NOTE:

Comfort-Mate Extra Base Outer Covers (CMBXC)


Ulti-Mate Cushion Inner Cover

10-15" Wide x 10-16" Deep

15" Deep 16" Deep10" Deep 11" Deep 12" Deep 13" Deep 14" DeepN/AN/AN/AN/A1063725-NLA1063724-NLA1063723-NLA10" WideN/AN/AN/A1063729-NLA1063728-NLA1063727-NLA1063726-NLA11" WideN/AN/A1063731-NLA1063730-NLA1063714-NLAN/AN/A12" WideN/A1063735-NLA1063734-NLA1063733-NLA1063732-NLAN/AN/A13" Wide

1063716-NLA1063737-NLA1063715-NLA1063736-NLAN/AN/AN/A14" Wide1063738-NLAN/AN/AN/AN/AN/AN/A15" Wide

NOTE: Quantity one per package.


Ulti-Mate Cushion Inner Cover16-20" Wide x 16-20" Deep

16" Deep 17" Deep 18" Deep 19" Deep 20" DeepN/AN/A1063718-NLA1063739-NLA1063717-NLA16" WideN/A1063743-NLA1063742-NLA1063741-NLA1063740-NLA17" Wide

1063746-NLA1063745-NLA1063720-NLA1063744-NLA1063719-NLA18" Wide1063751-NLA1063750-NLA1063749-NLA1063748-NLA1063747-NLA19" Wide1063754-NLA1063753-NLA1063722-NLA1063752-NLA1063721-NLA20" Wide





1063289 Hooks, Flush Mount with Hardware (Pair) 2 211063290 Hooks (1" Drop, 7/8" Tubing) (Pair) 2 211063291 Hooks (1" Drop, 1" Tubing) (Pair) 2 211063292 Hooks (2" Drop, 7/8" Tubing) (Pair) 2 211063293 Hooks (2" Drop, 1" Tubing) (Pair) 2 211063294 Hooks (3" Drop, 7/8" Tubing) (Pair) 2 211063295 Hooks (3" Drop, 1" Tubing) (Pair) 2 211063327 Clamps, Quick Release Rail (7/8" and 1" Tubing)

(Pair)2 22

4 ea. Attaching Screws included with Item #1

Ulti-Mate Base Hardware


10-15" Wide x 10-16" Deep

15" Deep 16" Deep10" Deep 11" Deep 12" Deep 13" Deep 14" DeepN/AN/AN/AN/A1063766-NLA10637651063755-NLA10" WideN/AN/AN/A1063770-NLA1063769-NLA1063768-NLA1063767-NLA11" WideN/AN/A1063772-NLA1063771-NLA1063756-NLAN/AN/A12" WideN/A1063776-NLA1063775-NLA1063774-NLA1063773-NLAN/AN/A13" Wide

1063758-NLA1063778-NLA1063757-NLA1063777-NLAN/AN/AN/A14" Wide1063779-NLAN/AN/AN/AN/AN/AN/A15" Wide


16-20" Wide x 16-20" Deep

16" Deep 17" Deep 18" Deep 19" Deep 20" DeepN/AN/A1063760-NLA1063780-NLA1063759-NLA16" WideN/A1063784-NLA1063783-NLA1063782-NLA1063781-NLA17" Wide

1063787-NLA1063786-NLA1063762-NLA1063785-NLA1063761-NLA18" Wide1063792-NLA1063791-NLA1063790-NLA1063789-NLA1063788-NLA19" Wide1063795-NLA1063794-NLA1063764-NLA1063793-NLA1063763-NLA20" Wide


Ulti-Mate Base Inner Covers


Ulti-Mate Air Back and Ulti-Mate Air Back Pneumatic



See Chart Item #1 - Back Covers 1 111063330-NLA NLA - Clamps, Cane (7/8") (Pair) 2 221063329-NLA NLA - Clamps, Cane (3/4") (Pair) 2 221063328-NLA NLA - Clamps, Cane (1") (Pair) 2 221063841-NLA NLA - Bladder, Lumbar with Bulb and Valve 1 13 B1081575-NLA NLA - Bladder, Lateral with Bulb and Valve 1 1A

See Chart Main Wire Assembly 1 1AA - Not Shown B - For Ulti-Mate Air Back Pneumatic

NOTE:

Item #1 - Back Covers

16" High 20" High1063813-NLA1063812-NLA16-17" Wide1063815-NLA1063814-NLA18-19" Wide1063817-NLA1063816-NLA20" Wide

NOTE: For odd sizes, please contact your Customer Service representative.


Ulti-Mate Air Back and Ulti-Mate Air Back PneumaticMain Wire Assembly

Back Width Part Number5000069-NLA16"5000071-NLA17"5000005-NLA18"5000073-NLA19"5000075-NLA20"


S-Back CoverItem


Package Assembly1063796-NLA NLA - Cover, S-Back - Medium (15 - 18" W) 1 111063797-NLA NLA - Cover, S-Back - Large (18 - 20" W) 1 111063798-NLA NLA - Clip, S-Back Mounting (Pair) 2 12

S-Back Cover




1064044-NLA NLA - Retainer 1 111064045-NLA NLA - Kit, Strap with Hardware, Small

(Includes: (4) Screw, Button Head Socket #8-32 x3/4")

1 12

1064046-NLA NLA - Kit, Strap with Hardware, Medium (Includes: (4) Screw, Button Head Socket #8-32 x3/4")

1 12

1064047-NLA NLA - Kit, Strap with Hardware, Large(Includes: (4) Screw, Button Head Socket #8-32 x3/4")

1 12

1087729 Kit, Lock Block and Screws 1 23 AA - Includes the Lock Block and (2) Screws, Button Head Socket #8-32 x 3/4") NOTE:

PaxBac Hardware


Curved Back and Curved Back Pneumatic Covers, CaneClamps and Back Mounting Hooks





See Chart Item #1 Back Covers 1 11See Chart Item #2 Curved Back and Curved Back Pneumatic

Back Hooks2 22

1063331 Clamps, Cane, Twist Release (1" Tubing) (Pair) 2 131063332 Clamps, Cane, Twist Release (7/8" Tubing) (Pair) 2 135500318 Clamps, Fixed Rail w/ Instruction Sheet

(7/8" and 1" Tubing) (Pair)2 14

Item #1 Back Covers

Part Numbers Width x Height10" x 10"1063805-NLA12" x 12"1063799-NLA14" x 14"1063800-NLA16" x 16"1063801-NLA16" x 20"1063802-NLA18" x 20"1063803-NLA20" x 20"1063804-NLA

NOTE: Quantity One per Package

Item #2 Curved Back Hooks (Flush Mount and Recess Mount)(4 ea. Attaching Screws are included with Mounting Hooks)

Width x TubingDiameter

Flush Mount(Qty 2 ea.)

1"Recess

(Qty 2 ea.)2"

Recess(Qty 2 ea.)

3"Recess

(Qty 2 ea.)N/AN/AN/A1063289

10" x 7/8" and 1" See Note(s) A1063298-NLA1063297-NLA1063296-NLAN/A12" x 7/8"1063301-NLA1063300-NLA1063299-NLAN/A12" x 1"1063076-NLA1063075-NLA1063074-NLAN/A14" x 7/8"1063079-NLA1063078-NLA1063077-NLAN/A14" x 1"1063310-NLA1063309-NLA1063308-NLAN/A16" x 7/8"1063313-NLA1063312-NLA1063311-NLAN/A16" x 1"1063316-NLA1063315-NLA1063314-NLAN/A18" x 7/8"1063319-NLA1063318-NLA1063317-NLAN/A18" x 1"1063322-NLA1063321-NLA1063320-NLAN/A20" x 7/8"1063325-NLA1063324-NLA1063323-NLAN/A20" x 1"



A - 10" wide back wheelchairs will use only Flush Mount Hooks NOTE:NOTE: When ordering hooks for odd size widths, go to the next size up. Example: for a 15" wide back order a 16" wide hook.


KSS Seating Accessories for Abductors, Adductors andLaterals


KSS Seating Accessories for Abductors, Adductors andLaterals



1072716-NLA NLA - Brackets, Adductor, Flush, Black 1 111073061-NLA Brackets, Adductor Offset, Black (1") 1 121072431-NLA NLA - Pad, Adductor - Small (10" L) 1 131072902-NLA NLA - Pad, Adductor - Medium (12" L) 1 131072432-NLA NLA - Pad, Adductor - Large (14" L) 1 131072433-NLA NLA - Cover, Adductor - Small (Fits 10") 1 141072434-NLA NLA - Cover, Adductor - Medium (Fits 12") 1 141072741-NLA NLA - Cover, Adductor - Large (Fits 14") 1 14

1063831 Bracket, Abductor Flip Down - Small (HeightAdjustable From 2-3/8" to 3-3/4")

1 151063830 Bracket, Abductor Flip Down - Large (Height

Adjustable From 3" to 5-1/8")1 15

1063834 Pad, Abductor Flip Down - Small (3" H x 4-3/4" D x2-1/4" W)

1 1B1063833 Pad, Abductor Flip Down - Large (4" H x 6" D x

3-1/2" W)1 1B

1072703-NLA NLA - Bracket, Lateral Support, Swingaway - Small 2 161072526 Bracket, Lateral Support, Swingaway - Medium/

Large2 16

1063829 Bracket, Lateral Support, Fixed - Small 1 1B1063828 Bracket, Lateral Support, Fixed - Medium/ Large 1 1B

5000054-NLA NLA - Pads, Lateral Support, Fixed - Small (4" H x5" D x 1" W)

2 1B5000053-NLA NLA - Pads, Lateral Support, Fixed - Medium (4-1/2"

H x 6" D x 1" W)2 1B

5000052-NLA NLA - Pads, Lateral Support, Fixed - Large (5" H x7-1/2" D x 1" W)

2 1B1077148 Cover, Lateral Support - Small (4" H x 5" D x 1" W) 1 1A,B1077149 Cover, Lateral Support - Medium (4-1/2" H x 6" D x

1" W)1 1A,B

1077150 Cover, Lateral Support - Large (5" H x 7-1/2" D x 1"W)

1 1A,B1077157 Pad, Lateral Support, Swingaway - Small (4" H x 5"

D x 1" W)1 1B

1077158 Pad, Lateral Support, Swingaway - Medium (4-1/2"H x 6" D x 1" W)

1 1B1077159 Pad, Lateral Support, Swingaway - Large (5" H x

7-1/2" D x 1" W)1 1B

A - Lateral Support Covers fit both Fixed and Swingaway Support Pads. B - Not Shown

NOTE:


KSS Seating Accessories for Basic Head Support


KSS Seating Accessories for Basic Head SupportItem


Package Assembly1063837 Head Support Assembly, Adult (7" D x 8" H) 1 111063838 Head Support Assembly, Child (5" D x 8" H) 1 111063840 Posts, Horizontal Head Support, Extra Long (15" L) 1 12

1072464-NLA NLA - Posts, Horizontal Head Support, Adult (7" L) 1 121072442-NLA NLA - Posts, Horizontal Head Support, Child (5" L) 1 12

1063839 Posts, Vertical Head Support, Extra Long (15" L) 1 131072444-NLA NLA - Posts, Vertical, Head Support - Regular

(Length 8")1 13

0273100 Kit, Headrest Clamp, Lever Style 1 14 B1072439-NLA NLA - Knob, Adjustment, Black (3/4" L Threads) 1 15 B

1078070 Bracket Assembly, Headrest Offset, Black 1 161063835 Pad, Head Support - Adult (3" H x 10" W) 1 1A1063836 Pad, Head Support - Child (2-1/2" H x 7-1/2" W) 1 1A

1084842-NLA NLA - Cover, Outer, Head Support - Adult (3" H x10" W)

1 1A1084843-NLA NLA - Cover, Outer, Head Support - Child (2-1/2" H

x 7-1/2" W)1 1A

A - Not Shown B - Item 5 Adjustment Knob was replaced with an Adjustment Lever in Headrest Clamp Kit part # 0273100. The Lever is not

available as a separate part. The knob Part # 1072439 is sold separately and is interchangeable with the Lever. NOTE:


KSS Seating Accessories for Headrest Pads and GrowthBrackets


KSS Seating Accessories for Headrest Pads and GrowthBrackets



1073062-NLA NLA - Pad, Adjustable Headrest - Small (9" W x3-1/2" H)

1 110128000 Headrest, Two-Step (8-1/2" W x 5-1/2" H) 1 12

1073063-NLA NLA - Pad, Adjustable Headrest, Two-Step - Large(11" W x 6" H)

1 130127700 Headrest, Curved (6" W x 7" H) 1 14

1077861-NLA NLA - Kit, Spacer Blocks and Mounting Screws 4 151084149-NLA NLA - Bracket, Growth Adjustable, Black (7/8") 1 161084148-NLA NLA - Bracket, Growth Adjustable, Black (1") 1 165500249-NLA NLA - Bracket, Fixed Growth, Small, Black (Fits 10"

Systems)1 17

5500250-NLA NLA - Bracket, Fixed Growth, Medium, Black (Fits12" Systems)

1 175500043-NLA NLA - Bracket, Growth Fixed, Large, Black (Fits 14"

and Wider Systems)1 17


KSS Mounting BracketsFor (12"-16" Wide) ADJASBA and Pronto M71 jr.Seat Frames


KSS Mounting BracketsFor (12"-16" Wide) ADJASBA and Pronto M71 jr.Seat Frames



1136833 Kit, KSS Mounting Hardware For Seat Rails withT-Nuts

1 11 ABracket, Seat Mounting, Rear, Black - Right 1 12Bracket, Seat Mounting, Rear, Black - Left 1 13Bracket, Seat Mounting, Front, Black 1 24Screw, Phillips Truss Head (1/4-20 x 3/4") 1 85Screw, Hex Head w/ Patch (5/16-18 x 5/8") 1 46Washer, Steel (5/16 x 3/4 x 1/16") 1 47T-Nut (5/16-18) 1 48

A - Includes items 2-8 NOTE:


ContourU Adjustable Back HardwareUniversal Interfacing Hardware Kit - HWABK


ContourU Adjustable Back HardwareUniversal Interfacing Hardware Kit - HWABK



1100020-NLA NLA - Screw, Socket Button Head (1/4-20 x 5/8") 1 811100270-NLA NLA - Screw, Socket Head (#8-32 x 3/8") 1 421100380-NLA NLA - Screw, Phillips Pan Head (#8-32 x 1/4") 1 163

1100381 Screw, Set Socket Cup Point (#10-32 x 1/2") 1 843000242-NLA NLA - Backing Plate, 2 Position, 1" Spacing 1 453002719-NLA NLA - Clamp Block, Universal 1 46

3002721 Pin, Quick Release 1 473002751 Clamp Base, Universal 1 28See Note See Footnote 1 89 E

3003054-NLA NLA - Bracket, Back, 4 Hole - Short 1 2103003055-NLA NLA - Bracket, Back, 7 Hole - Long 1 2113003057-NLA NLA - Base, Snap Lock 1 2123003058-NLA NLA - Lever, Snap 1 213

3003070 Clamp Assembly, Universal 1 114 B3003071 Snap Lock Assembly 1 115 C

4000031-NLA NLA - Wrench, Allen (9/64") 1 1164000032-NLA NLA - Wrench, Allen (3/32") 1 1174000043-NLA NLA - Wrench, Allen (5/32") 1 118

1097019 Kit, Adjustable Back Bracket Includes: (8) Screws, (1) Weld Nut, (4) Brackets, (1) Quick Release Pin, (1) 9/64" Hex Key,and Instruction Sheet

1 119 D

1100415-NLA NLA - Insert, Threaded (1/4-20") 1 8A1140755 Kit, Adjustable Back Mounting 1 1A

A - Not Shown B - Includes items 3-4, 6, 8-9 and instructions C - Includes items 2-4, 6, 9, 12-13 and instructions D - Includes items 1, 5, 7, 10-11, 16-18 and instructions E - Universal Clamp Strap is no longer available as a service part.

NOTE:




GL01 Growth Links with Hardware, Standard (Pair) 2 11GL03 Growth Links with Hardware, Heavy Duty (Pair) 2 11

3000634-NLA NLA - Growth Link without Hardware, Standard -Left

1 223000635-NLA NLA - Growth Link without Hardware, Standard -

Right1 22

3000627-NLA NLA - Growth Link without Hardware, Heavy Duty -Left

1 223000628-NLA NLA - Growth Link without Hardware, Heavy Duty -

Right1 22

1100023 Screw, Button Head w/ Patch (1/4-20 x 1/2") 1 1031100039 Washer (1/4 x 9/16 x 1/16") 1 104

3000242-NLA NLA - Backing Plate, 2 Position, 1" Spacing 1 453000629-NLA NLA - Growth Link Hardware 1 1A,B

A - Not Shown B - Includes items 3-5

NOTE:

ContourU Growth LinksGLO1 Standard and GL03 Heavy Duty - Interfacing Hardware Package




GL10 Dial Link Assemblies with Hardware (Pair) 2 113002325-NLA NLA - Dial Link Assembly without Hardware - Left 1 123002326-NLA NLA - Dial Link Assembly without Hardware - Right 1 12

1100023 Screw, Button Head w/ Patch (1/4-20 x 1/2") 1 1233000243-NLA NLA - Backing Plate, 3 Position, 1" and 3" Spacing 1 44 A

A - No Longer Available individually. Refer to Assembly GL10 for replacement. NOTE:

ContourU Dial LinksGL10 Interfacing Hardware Package




AR20 Armrests with Hardware, Desk Length 2 11AR24 Armrests with Hardware, Full Length 2 11

3000453-NLA NLA - Kit, Armrest, Desk Length - Right/Left 1 21 A3000452-NLA NLA - Kit, Armrest, Full Length - Right/Left 1 21 A

1200024 Clip, Spring 1 223000759 Receptacle, Arm Post 1 23

1100020-NLA NLA - Screw, Socket Button Head (1/4-20 x 5/8") 1 441100084-NLA NLA - Locknut, Nylon (1/4-20) 1 251100090-NLA NLA - Screw, Socket Head (1/4-20 x 2") 1 263000243-NLA NLA - Backing Plate, 3 Position, 1" and 3" Spacing 1 27 B

1110817 Kit, Arm Pad w/ Screws, Desk Length, UrethaneWaterfall, Black (9" L x 2-5/8" W) (Pair)

2 183000233-NLA NLA - Pad, Armrest, Full Length 1 291200033-NLA NLA - Plug Button, Rectangular, Black (1-1/2 x 1/2") 1 410

1200034 Plug Button, Round, Black (7/8") 1 411A - Includes: Post, items 8 or 9, and items 10-11. B - No Longer Available individually. Refer to Part # AR20 or AR24 for replacement.

NOTE:

ContourU Arm RestsAR20 and AR24 Interfacing Hardware




MB04P Hardware, Interfacing (1") (Pair) 2 21 BMB12P Hardware, Interfacing (7/8") (Pair) 2 21 B

1100023 Screw, Button Head w/ Patch (1/4-20 x 1/2") 1 4215108X000 Locknut (1/4-20) 1 43

1200012-NLA NLA - Lanyard 1 241200029-NLA NLA - Pin, Detent with Ring (1/4" x 1 1/8") 1 25

3002237 Bracket, Pan Mounting, Black (1") 1 46 D3002234 Bracket, Pan Mounting, Black (7/8") 1 46 E

3003068-NLA NLA - Hardware, Pan Mounting 1 47 C0900114 Instruction Sheet, Pan Mounting Bracket 1 1A

A - Not Shown B - Includes items 6-7 and Instruction Sheet C - Includes items 2-5 D - Used on MB04P only E - Used on MB12P only

NOTE:

ContourU Pan Mounting BracketsMB04P and MB12P Interfacing Hardware Package




MB06P Hardware, Interfacing (1") (Pair) 2 21 BMB03P Hardware, Interfacing (7/8") (Pair) 2 21 B

3003067-NLA NLA - Hardware, Wood Mounting 1 1A,C1100023 Screw, Button Head w/ Patch (1/4-20 x 1/2") 1 82

1100415-NLA NLA - Insert, Threaded (1/4-20") 1 831200012-NLA NLA - Lanyard 1 441200029-NLA NLA - Pin, Detent with Ring (1/4" x 1 1/8") 1 45

3002235 Bracket, Wood Mounting, Black (1") 1 46 D3002236 Bracket, Wood Mounting, Black (7/8") 1 46 E

A - Not Shown B - Includes item 6, Instruction Sheet, and Wood Mounting Hardware. C - Includes items 2-5. D - MB06P Only. E - MB03P Only.

NOTE:

ContourU Wood Mounting BracketsMB03P and MB06P Interfacing Hardware Package


ContourU Adjustable FootrestsLB07 and LB08 Interfacing Hardware


ContourU Adjustable FootrestsLB07 and LB08 Interfacing Hardware



3001275-NLA NLA - Adjustable Footrest Assembly - Small - LB07(Pair)

2 11 B1090100-NLA NLA - Footrest Assembly, Adjustable, Small, Single

- Right1 11 B

1090101-NLA NLA - Footrest Assembly, Adjustable, Small, Single- Left

1 11 B3001264-NLA NLA - Adjustable Footrest Assembly - Large - LB08

(Pair)2 11 B

1090102-NLA NLA - Footrest Assembly, Adjustable, Large, Single- Right

1 11 B1090103-NLA NLA - Footrest Assembly, Adjustable, Large, Single

- Left1 11 B

3000731 NLA - Plate, Foot - Small (4-25/32" W x 6-1/8" L) 1 123000732-NLA NLA - Plate, Foot - Large (6-1/8" W x 8" L) 1 123001272-NLA NLA - Strap, Ankle, LB07, Small 1 233001258-NLA NLA - Strap, Ankle, LB08, Large 1 233001261-NLA NLA - Pivot/Slide Tube Assembly with Plug Buttons,

Chrome1 24

3000966 Heel Loop, Small (2" W x 5-3/4" L) - LB07 1 253000967 Heel Loop - Large - Right/Left (2" W x 6-7/8" L) -

LB081 25

47311X001 Clamp (7/8") 1 261200034 Plug Button, Round, Black (7/8") 1 271200036 Plug Button, Round, Black (3/4") 1 28

1100091-NLA NLA - Screw, Socket Head (1/4-20 x 2-1/2") 1 291100208-NLA NLA - Screw, Socket Flat Head (1/4-20 x 1-3/4") 1 2101100030-NLA NLA - Nut, Hex (1/4-20) 1 2111100084-NLA NLA - Locknut, Nylon (1/4-20) 1 6121100209-NLA NLA - Eyelet, Grommet and Washer 1 213

1100039 Washer (1/4 x 9/16 x 1/16") 1 4AA - Not Shown B - Includes items 2-13

NOTE:




1091870 Screw, Socket Button Head w/ Patch (1/4-20 x 3/4") 1 811100168-NLA NLA - Bolt, Clamp (5/16-24 x 1-3/8") 1 221100169-NLA NLA - Locknut (5/16-24") 1 231100175-NLA NLA - Screw, Socket Head (1/4-28 x 5/8") 1 441100191-NLA NLA - Screw, Set Socket Cone Point (1/4-20 x

5/16")1 25

1200011-NLA NLA - Pin, Detent with Ring (1/4" x 7/8") 1 261200012-NLA NLA - Lanyard 1 27

1200036 Plug Button, Round, Black (3/4") 1 4847311X001 Clamp (7/8") 1 29

3000243-NLA NLA - Backing Plate, 3 Position, 1" and 3" Spacing 1 410 C3000752-NLA NLA - Tube, Legrest, Chrome 1 2113000753-NLA NLA - Tube, Slide, Chrome 1 212

3000755 Bracket, Slide, Chrome 1 2133000401-NLA NLA - Slide Bracket Assembly, Chrome 1 213 A3000802-NLA NLA - Collar, Half, Non-Threaded 1 214

3000757 Legrest Support Assemblies, Chrome (Pair) 2 1153000400-NLA NLA - Legrest Support Assembly, Chrome - Right or

Left1 215

3001249-NLA NLA - Clamp Assembly, Lock Nut 1 216 BA - Includes items 1, 10, and Bracket. B - Includes items 2, 3, and 9. C - No Longer Available individually. See part # 3000401 for replacement.

NOTE:

ContourU Adjustable Legrest TopsLT06 Interfacing Hardware


ContourU and Silhouette Back and Seat MountingHardware

FDI-596 ECONO-EZE and FDI-538 ECONO-EZE Hardware can be used on7/8" or 1" Tubing


ContourU and Silhouette Back and Seat MountingHardware

FDI-596 ECONO-EZE and FDI-538 ECONO-EZE Hardware can be used on7/8" or 1" Tubing



1161006-NLA NLA - Hardware, FDI-596 ECONO-EZE BackMounting

1 11 A1161007-NLA NLA - Hardware, FDI-538 ECONO-EZE Back and

Seat Mounting1 12 B

A - Hardware comes complete with hardware shown. Individual components are non-saleable. Used for Contour U and Silhouette Backs only.

B - Hardware comes complete with hardware shown. Individual components are non-saleable. Used for Contour U and Silhouette Backs and Seats.

NOTE:




1100380-NLA NLA - Screw, Phillips Pan Head (#8-32 x 1/4") 1 1611100381 Screw, Set Socket Cup Point (#10-32 x 1/2") 1 821100382 Screw, Socket Head (#8-32 X 1/4") 1 833002713 Nut, Mounting - 2 Hole (11/32" x 1-1/2") 1 44

3002719-NLA NLA - Clamp Block, Universal 1 453002721 Pin, Quick Release 1 463002751 Clamp Base, Universal 1 273002752 Base, Quick Lock, Universal 1 28

3002899-NLA NLA - Bracket, Adjustable Mounting, Black 1 49See Note See Footnote 1 810 D

4000031-NLA NLA - Wrench, Allen (9/64") 1 1114000032-NLA NLA - Wrench, Allen (3/32") 1 112

3003069 Quick Lock Clamp Assembly 1 213 A3003070 Clamp Assembly, Universal 1 214 B1097018 Kit, Back Bracket Adjustable Mounting 1 115 C

A - Includes items 1-2, 5, 8, 10 and Instructions B - Includes items 1-2, 5, 7, 10 and Instructions C - Includes items 3-4, 6, 9, 11 and Instructions D - Universal Clamp Strap is no longer available as a service part.

NOTE:

Silhouette Back Mounting HardwareSMB01


Silhouette Lateral Supports and Inserts


Silhouette Lateral Supports and InsertsItem


Package Assembly3002991 Kit, Lateral Support, Straight - Right 1 11 B3003021 Kit, Lateral Support, Straight - Left 1 11 B3002777 Pad, Lateral Support 1 223002746 Plug, Lateral Support 1 233002743 Bracket, Lateral Insert, Straight (Identical for Right

and Left Lateral Supports)1 14 D

3002757 Lateral Mount Assembly - Right (Includes: Set Screw, Lock Button, Lock Pin, LateralMount and Spring)

1 15

3002756 Lateral Mount Assembly - Left (Includes: Set Screw, Lock Button, Lock Pin, LateralMount and Spring)

1 15

1100385-NLA NLA - Screw, Set Socket Dog Point (#10-32 x 1/4") 1 263002802-NLA NLA - Bracket, Lateral Insert Offset - Right (1/2") 1 173002803-NLA NLA - Bracket, Lateral Insert Offset - Left (1/2") 1 173002804-NLA NLA - Bracket, Lateral Insert Offset - Right (1") 1 173002805-NLA NLA - Bracket, Lateral Insert Offset - Left (1") 1 173002874-NLA NLA - Bracket, Lateral Insert Offset - Right (1-1/2") 1 173002875-NLA NLA - Bracket, Lateral Insert Offset - Left (1-1/2") 1 173002992-NLA NLA - Kit, Lateral Supports Offset - Right (1/2") 1 1A,C3003022-NLA NLA - Kit, Lateral Supports Offset - Left (1/2") 1 1A,C3002993-NLA NLA - Kit, Lateral Supports Offset - Right (1") 1 1A,C3003023-NLA NLA - Kit, Lateral Supports Offset - Left (1") 1 1A,C3002994-NLA NLA - Kit, Lateral Supports Offset - Right (1-1/2") 1 1A,C3003024-NLA NLA - Kit, Lateral Supports Offset - Left (1-1/2") 1 1A,C3002801-NLA NLA - Kit, Lateral Lockout (Includes: Instructions

and Washers)1 1A

A - Not Shown B - Includes items 2-6 and Instruction Sheet. C - Includes items 2-3, 5, 7 and Instruction Sheet and Lateral Cover (not shown). D - Indentical for Right and Left Lateral Supports.

NOTE:




3003065-NLA NLA - Kit, Mounting Brackets, Extended (Pair) 2 11 A1100382 Screw, Socket Head (#8-32 X 1/4") 1 423002713 Nut, Mounting - 2 Hole (11/32" x 1-1/2") 1 233002721 Pin, Quick Release 1 24

3002900-NLA NLA - Bracket, Extended Mounting 1 254000031-NLA NLA - Wrench, Allen (9/64") 1 16

A - Includes items 2-6 and Instruction Sheet NOTE:

Silhouette Extended Mounting Bracket


Swing and Non-Swing Lap Tray Mounting Hardware


Swing and Non-Swing Lap Tray Mounting HardwareItem


Package AssemblySee Note See Footnote 1 11 B,C,G

1084841-NLA NLA - Q-trim (9' L) 1 121084840-NLA NLA - Kit, Rail - Standard 1 13 D,F

1046390 Package, Phillips Head Screw (1/4-20 x 1/2") 4 141049375-NLA NLA - Rail, Standard - Left 1 15 E,F1049374-NLA NLA - Rail, Standard - Right 1 15 E,F

1063842 Clamps, Swingaway Tray 1 2A1049210-NLA NLA - Rail, Tubular - Right 1 1A1049211-NLA NLA - Rail, Tubular - Left 1 1A1068860-NLA NLA - Instruction Sheet, Communication & Full Lap

Trays1 1A,H

1068861 Instruction Sheet, Swing-Away Tray 1 1AA - Not Shown B - Includes converter brackets for 7/8" rail. C - Includes: All hardware except tray and Q-trim D - Includes items 4 and 5 E - Item #3 needs to be ordered for replacement. F - Individual parts are no longer available. Contact Invacare Customer Service for complete replacement kit. G - Part is no longer available as a service part. H - Item is no longer available from the Invacare Service Parts Department. Refer to the Invacare Website under "Product

Literature Search". Enter the part number in the "Keywords" field and download a free PDF version copy. NOTE: There is no replacement hardware for Communication Trays other than Item 2 & Instruction Sheet

NOTE:




1100140 Screw, Socket Flat Head (1/4-20 x 5/8") 1 411100168-NLA NLA - Bolt, Clamp (5/16-24 x 1-3/8") 1 2260264X001 Locknut (5/16-24) 1 23

1100323-NLA NLA - Lockwasher (1/4") 1 441100369-NLA NLA - Nut, Acorn (1/4-20) 1 45

1200036 Plug Button, Round, Black (3/4") 1 1647311X001 Clamp (7/8") 1 27

1200071-NLA NLA - Knob 1 181072440 Knob, Adjustment, Black (1/2" L Threads) 1 183000837 Tube, Slide Lock 1 193000839 Tube, Support, Tray - Right 1 1103000838 Tube, Support, Tray - Left 1 1103000898 Bracket, Support, Chrome - Right 1 1113000900 Bracket, Support, Chrome - Left 1 112

4000043-NLA NLA - Wrench, Allen (5/32") 1 113

TR40L and TR40R Tray Mounting Hardware




3002812-NLA NLA - Kit, Gas Cylinder Base (Includes: Cylinder (P550 Complete), CableAssembly, Cross Tube, Pivot Bar, Retaining Ring,Cable Bracket, Cylinder Bracket and Hardware)

1 11

3002882-NLA NLA - Kit, Base Gas Spring Bag Assembly(Includes: Clevis Pin, Hairpin, Pelvic Strap,Hardware and Instructions)

1 12

1100084-NLA NLA - Locknut, Nylon (1/4-20) 1 333002866-NLA NLA - Base Foot Assembly 1 14

1100046 Screw, Hex Head (1/4-20 x 1-1/4") 1 153002881-NLA NLA - Base Lever Retainer Assembly 1 16

1100133 Screw, Socket Button Head (1/4-20 x 1-1/2") 1 473002184 Valve and Hose Assembly 1 28 B

3001735-NLA NLA - Hose Assembly, Male (4") 1 1A3003002-NLA NLA - Knob, Nylon (5/16-18 x 1/2") 1 2A3003004-NLA NLA - Knob, Nylon (5/16-18) 1 1A

A - Not Shown B - Drawing is not shown to scale.

NOTE:

Silhouette Shape Sensor and (ContourU Base Before9/1/09)

For assistance on ContourU Bases manufactured after 8/31/09 contact Pindot Customer Service at1-800-451-3553.




3002224-NLA NLA - Pellets Assembly 1 2A4000006-NLA NLA - Pencil, Indelible 1 1A4000001-NLA NLA - Goniometer 1 1A4000000-NLA NLA - Curve, Flexible 1 1A3001729-NLA NLA - Tool, Marking 1 1A

1310082 Theraputty 1 1A1100298-NLA NLA - Wrench, Allen, 9 Piece Folding 1 1A

SM60 Package, Plaster Roll (5 x 50") 12 1AMF04 Pellets, Polyethlene (25 lbs) 1 3A

1160582 Seat Bag Assembly, Latex Free Rubber 1 1A1160583 Back Bag Assembly, Latex Free Rubber 1 1A3001456 Data Forms, Seat 1 10A,C3002470 Data Forms, Back 1 10A,C

3002254-NLA NLA - Clamp Bar Assembly, Vertical 1 2A,B3002255-NLA NLA - Clamp Bar Assembly, Horizontal, Long 1 1A,B3002256-NLA NLA - Clamp Bar Assembly, Horizontal, Short 1 1A,B3002597-NLA NLA - Plate, Pivot Tube 1 1A

SB05 Strap, Pelvic, Unpadded 1 1A,BA - Not Shown B - Used Before 9/1/09 for ContourU only.. C - Sillouette Shape Sensor

NOTE:

Silhouette Shape Sensor and ContourU Accessories


Silhouette Shape Sensor and (ContourU Before 9/1/09)Hardware

For assistance on ContourU Hardware manufactured after 8/31/09 contact Pindot Customer Service at1-800-451-3553.






3002085-NLA NLA - Footrest Assembly - Left 1 11 C3002086-NLA NLA - Footrest Assembly - Right 1 21 C1163427-NLA NLA - Kit, Front 3" Dual Swivel Caster Retro-Fit 1 12 E

Caster, Swivel Dual (3") 1 2Bar, Caster, Silver 1 1Screw, Hex Head (1/2-13 x 1-1/4") 1 2Washer, Steel (1/2 x 1-1/4 x 1/16") 1 2

3001878-NLA NLA - Bracket, Height Adjustable, Silver 1 233001836-NLA NLA - Seat, Depth Pointer 1 24

1100046 Screw, Hex Head (1/4-20 x 1-1/4") 1 253001868-NLA NLA - Knob Washer Assembly 1 461200157-NLA NLA - O-Ring (11/32 x 7/32 x 1/16") 1 271100259-NLA NLA - Screw, Hex Head (5/16-18 x 1/2") 1 283001280-NLA NLA - Plate, Friction 1 293002926-NLA NLA - Armrest 1 1103003003-NLA NLA - Knob, Nylon (5/16-18 x 1") 1 4111100021-NLA NLA - Screw, Socket Button Head (1/4-20 x 3/4") 1 212

1100039 Washer (1/4 x 9/16 x 1/16") 1 4131100084-NLA NLA - Locknut, Nylon (1/4-20) 1 2143002573-NLA NLA - Plate, Side 1 2151110961-NLA NLA - Caster, Dual Lock (5") 1 216 B1110962-NLA NLA - Casters, Dual Lock (5") 2 116 B1110425-NLA NLA - Kit, Caster 5" Swivel with Brake 2 116 D

1123548 Caster Assembly, Swivel w/ Brake (5") 1 2163002631-NLA NLA - Handle Assembly, Seat, Black 1 2171100379-NLA NLA - Screw, Shoulder Hex Socket Head (1/2 x

1/2", 7/16-24)1 218

1100027-NLA NLA - Screw, Socket Head (1/4-20 x 7/8") 1 1193002661-NLA NLA - Lever, Clamp, Silver - Top 1 2201200120-NLA NLA - Collar, One Piece (41/64" Dia.) 1 1213002645-NLA NLA - Lever Handle Assembly 1 1221100362-NLA NLA - Screw, Set Socket Cone Point (#8-32 x 5/8") 1 123

3002662 Lever, Clamp, Silver - Bottom 1 1241250035-NLA NLA - Spring, Compression (27/32 x 1-1/4 x 3/64") 1 1253003001-NLA NLA - Lever Pivot 1 1263001790-NLA NLA - Imprint Data Board Assembly 1 127 A1200103-NLA NLA - Knob, Ball (1-7/8" OD 5/16" Thread) 1 1283002117-NLA NLA - Stud Imprint Handle, Finished 1 1293002563-NLA NLA - Cover, Back, Printed 1 130

3001287 Cap, Sensor 1 100313002648-NLA NLA - Grommet, Spur 1 10032






1100373-NLA NLA - Screw, Phillips Flat Head Tap (#8-1/4) 1 100333001795-NLA NLA - Cover, Cushion 1 1343001794-NLA NLA = Cushion, Foam Measuring 1 1351200124-NLA NLA - Knob, Plastic, Black 1 2363001455-NLA NLA - Abacus Guide Rod 1 102373002116-NLA NLA - Imprint Crossbar 1 138

A - Need 2 for Seat and Back. B - If replacing casters on chairs built before March 1, 2002, refer to part number 1123548 and order 2 ea. C - After 2/23/07 the Footrest Assembly Pt # 3002086 was manufactured to be used as a RT or LT side. D - Caster Kit part number 1110425 is no longer available. refer to part number 1123548 and order 2 ea. E - 8" Wheel is no longer available. Order Retro-Fit kit part number 1163427 as a direct replacement. Includes the casters,

caster bar and mounting hardware. Items 1-16 and 18 used for Silhouette Shape Sensor and (ContourU Before 9/1/09). Items 17 and 19-38 used for Silhouette Shape Sensor only.

NOTE:


Versair Adjustable Tension Back Upholstery Assembliesand Privacy Flaps


Versair Adjustable Tension Back Upholstery Assembliesand Privacy Flaps



1169271 Upholstery Assembly, w/ Hardware, Back, Versair,Adj. Tension Black Mesh (16-21" W x 15-17" H)

1 11 A1169272 Upholstery Assembly, w/ Hardware, Back, Versair,

Adj. Tension Black Mesh (21-26" W x 15-17" H)1 11 A

1169273 Upholstery Assembly, w/ Hardware, Back, Versair,Adj. Tension Black Mesh (16-21" W x 17-19" H)

1 11 A1169274 Upholstery Assembly, w/ Hardware, Back, Versair,

Adj. Tension Black Mesh (21-26" W x 17-19" H)1 11 A

1179453 Upholstery, Privacy Flap, Versair, Black Nylon,Standard (16 - 21" W)

1 121179454 Upholstery, Privacy Flap, Versair, Black Nylon,

Large (21 - 26" W)1 12

A - Assembly includes Back Upholstery, Right and Left Adjusters, Hardware and Instruction Sheet. Available as a Back Upholstery Assembly only. Individual components are not serviceable.

NOTE:


Invacare Corporation www.invacare.com

One Invacare WayElyria, Oh USA44036-2125800-333-6900

Technical Support800-832-4707Florida Technical Support407-321-5630

Customer Service800-333-6900

Form No. 92-38

© 2015 Invacare Corporation. All rightsreserved. Republication, duplication ormodification in whole or in part is prohibitedwithout prior written permission fromInvacare. Trademarks are identified by ™and ®. All trademarks are owned by orlicensed to Invacare Corporation or itssubsidiaries unless otherwise noted.(Revised 05/12/15)

seating and positioning - stormtdx.invacare.comstormtdx.invacare.com/doc_files/92_038.pdf ·...

Documents