seavi 02 junction boxes for flush mounted

06

GENERAL INFORMATION AND INSTRUCTIONS FOR USE : The junction boxes are destined for electrical instalations and telecommunications. Flush mounted in walls, ceilings and floors noncombustible, and recommended for a maximum voltage of 1,000 V AC or 1,500 d.c. Are made of termoplastic material ABS, halogen free. Have 4 or 6 cylinders for fixing the lids with plastic claw or screws. Have different tickets for tubes, no tools required for its drilling. You can link between them and with other junction boxes always that match one of the two measures, using pieces of link. Our system of different packaging for boxes and covers, allow the option of buying boxes or lids separately, as required. Manufactured to recommendation UNESA-D 1407-D, and according to the UNE-EN 60670-1, February 2006. -Degree of protection IP: 30. -Degree of protection against impacts IK: 0.7. -Isolation voltage: 750 V. Test method voltage: 3,5 00 V. -Glow wire test 650 º. -Maximum and minimum temperature during installation: -25 ° C to 60 º C. -Tightening torque on screws: 0.90 Nm. The boxes are intended for use in an indoor enclosure, for electrical installations or similar. The blind lids allow to keep the box free of dirt in the course of the work. The plastic filaments acts as witnesses and allows you to retrieve the blind lid for a new facility. Made of termoplastic material PP halogen free.

SEQUENCE OF ASSEMBLING FOR BOX REF. 23321 WITH ITS LID REF. 23301

The assembling it´s the same for all references in this serie

SEQUENCE OF ASSEMBLING FOR BOX REF. 23329 WITH ITS PIECES FOR LINK The assembling it´s the same for all references

in this serie

FIXING INSTRUCTIONS: The flush mounted boxes are fixing to the wall in the holes provided for such purpose, using cement mortar, plaster or plaster, placed so that they protrude from 5 to 8 mm, in this way when you plaster the wall, the box will be flush with the wall. For removing the lid, you have to do toggle with a screwdriver, between the box and the wall.

Junction boxes for flush mounted with closing of patented plastic claw or screws

REF. 23319 REF. 23316 REF. 23334

Measures mm: 64 x 64 x 44 Pieces/packing: 30 Unit Price: 0,4260 €

Measures mm: 77 x 77 Pieces/packing: 30 Unit Price: 0,4450 €

Measures mm: 2,8 x 25 Pieces/packing: 40 Unit Price: 0,0136 €

SPECIAL BOX FOR POINT OF LIGHT LID FOR BOX REF. 23001 - 23319 SCREWS FOR JUNCTION BOXES

REF. 23320 REF. 23300 REF. 23251



Measures mm: 100 x 60 Pieces/packing: 20/200 Unit Price: 0,4840 €

JUNCTION BOX 100 X 60 X 45 mm LID FOR BOX REF. 23320 BLIND LID FOR BOX REF. 23320

REF. 23321 REF. 23301 REF. 23252




JUNCTION BOX 100 X 100 X 50 mm

LID FOR BOX REF. 23321

BLIND LID FOR BOX REF. 23321

07


REF. 23322 REF. 23302 REF. 23253







REF. 23323 REF. 23303





REF. 23324 REF. 23220 REF. 23031



Pieces/packing: 100 Unit Price: 0,4230 €

DIVIDING GUIDE FOR THE JUNCTION BOX REF. 23219-23324

08


LID FOR BOX REF.23219-23324 -23139

JUNCTION BOX 450X215X65 mm

REF. 23325 REF. 23305 REF. 23254





REF. 23326 REF. 23306 REF. 23255




JUNCTION BOX 205 X 105 X 50 mm LID FOR BOX REF. 23326 BLIND LID FOR BOX REF. 23326

REF. 23327 REF. 23318 REF. 23035



Unit Price: 0,3750 €

BOX FOR THE NETWORK TERMINATION 300 X 200 X 60 mm

DIVIDING GUIDE FOR THE JUNCTION BOX REF. 23327

09



JUNCTION BOX 150X150X50 mm BLIND LID FOR BOX REF. 23325

REF. 23329 REF. 23298 REF. 23256







REF. 23330 REF. 23297 REF. 23036






10

REF. 23328 REF. 23299







REF. 23333 REF. 23296 REF. 23037





REF. 23332 REF. 23312

Measures diameter: 105 X 45 Pieces/packing: 60 Unit Price: 0,4700 €

Measures diameter: 120 Pieces/packing: 60 Unit Price: 0,4790 €

ROUND JUNCTION BOX 105 X 45mm


REF. 23331 REF. 23311

Measures diameter: 80 X 40 Pieces/packing: 60 Unit Price: 0,2970 €

Measures diameter: 95 Pieces/packing: 60 Unit Price: 0,3070 €

ROUND JUNCTION BOX 80 X 40 mm


11




seavi 02 junction boxes for flush mounted

Documents