seavi 15 special boxes for domotica, flush mounted

2
GENERAL INFORMATION AND INSTRUCTIONS FOR USE: The special boxes for domotica, have 4 cylinders for fixing the lids with plastic claw or screws. They have several input footprints for tubes and does not need any tools for its drilling. Our system of different packaging for boxes and covers, allow the option of buying boxes or lids separately, as required. Flush mounted in walls, ceilings and floors noncombustible, and recommended for a maximum voltage of 1,000 V AC or 1,500 d.c. Are made of termoplastic material ABS, halogen free. Manufactured to recommendation UNESA-D 1407-D, and according to the UNE-EN 60670-1, February 2006. -Degree of protection IP: 30. -Degree of protection against impacts IK: 0.7. -Isolation voltage: 750 V. Test method voltage: 3,500 V. -Glow wire test 650 º. -Maximum and minimum temperature during installation: -25 ° C to 60 º C. -Tightening torque on screws: 0.50 Nm. The boxes are intended for use in an indoor enclosure, for electrical installations or similar. SEQUENCE OF ASSEMBLING FOR BOX REF.23260 The assembling it´s the same for all references in this serie FIXING INSTRUCTIONS: The flush mounted boxes are fixing to the wall in the holes provided for such purpose, using cement mortar, plaster or plaster, placed so that they protrude from 5 to 8 mm, in this way when you plaster the wall, the box will be flush with the wall. For removing the lid, you have to do toggle with a screwdriver, between the box and the wall. Special boxes for domotica, flush mounted

Upload: seavi-slu

Post on 08-Mar-2016

212 views

Category:

Documents


0 download

DESCRIPTION

Special boxes for domotica, flush mounted

TRANSCRIPT

GENERAL INFORMATION AND INSTRUCTIONS FOR USE: The special boxes for domotica, have 4 cylinders for fixing the lids with plastic claw or screws. They have several input footprints for tubes and does not need any tools for its drilling. Our system of different packaging for boxes and covers, allow the option of buying boxes or lids separately, as required. Flush mounted in walls, ceilings and floors noncombustible, and recommended for a maximum voltage of 1,000 V AC or 1,500 d.c. Are made of termoplastic material ABS, halogen free. Manufactured to recommendation UNESA-D 1407-D, and according to the UNE-EN 60670-1, February 2006. -Degree of protection IP: 30. -Degree of protection against impacts IK: 0.7. -Isolation voltage: 750 V. Test method voltage: 3,5 00 V. -Glow wire test 650 º. -Maximum and minimum temperature during installatio n: -25 ° C to 60 º C. -Tightening torque on screws: 0.50 Nm. The boxes are intended for use in an indoor enclosu re, for electrical installations or similar.

52

SEQUENCE OF ASSEMBLING FOR BOX REF.23260 The assembling it´s the same for all references in this serie

FIXING INSTRUCTIONS: The flush mounted boxes are fixing to the wall in the holes provided for such purpose, using cement mortar, plaster or plaster, placed so that they protrude from 5 to 8 mm, in this way when you plaster the wall, the box will be flush with the wall. For removing the lid, you have to do toggle with a screwdriver, between the box and the wall.

Special boxes for domotica, flush mounted

REF. 23260 REF. 23224 REF. 23032

Measures mm: 236 x 151 x 52 Pieces/Packing: 10 Unit Price: 1,9540 €

Measures mm: 259 x 175 Pieces/Packing: 10 Unit Price: 1,7240 €

Pieces/Packing: 100 Unit Price: 0,3630 €

BOX FOR DOMOTICA 236 x 151 x 52 mm

LID FOR BOX REF.23218 – 23260

DIVIDING GUIDE FOR THE JUNCTION BOX REF. 23218-23260

REF. 23261 REF. 23223 REF. 23033

Measures mm: 200 x 130 x 52 Pieces/Packing: 10 Unit Price: 1,7090 €

Measures mm: 219 x 150 Pieces/Packing: 10 Unit Price: 1,6000 €

Pieces/Packing: 100 Unit Price: 0,3210 €

BOX FOR DOMOTICA 200 x 130 x 52 mm

LID FOR BOX REF. 23217

DIVIDING GUIDE FOR THE JUNCTION BOX REF. 23217 - 23261

53

Special boxes for domotica, flush mounted