Smooth Solutions for Rough Problems: THE DREHER FREE SAMPLE ANALYSIS

If you’d like to see how a

Dreher centrifugal tum-

bling system can finish

your toughest parts, we’ll

show you for free! Drehe

developed technology can

deburr, smooth, and polish

vour small metal oarts to

a precision, micro finish.. . in a fraction of the time F

needed for traditional ,

methods. We’ll provide 1 free lab analysis and test _

service, just wait until

after the sale. To learn

more about the full line

of Dreher finishing ma-

chines, compounds, and

accessories, call today.

Then, put us to the test.

n

processing.. . even a

I Drive, North Attleboro, MA 02760 Tel: (506) 695-0303 Fax: (506) 699-7420

Circle 019 on reader information card

gloss. QFM uses a proprietary test ob- ject pattern, which research has shown

to be far more discriminating than other commonly used patterns. The use of QFM’s distinction-of-image tech- nology provides a fast, repeatable, and objective means of measuring the vi- sual quality of finishes.

Circle 409 on the reader service card

Secondary Containment System George Fischer Inc. Tustin, Calif.

George Fischer’s Contain-It Sec- ondary Containment Piping System is constructed from clear polyvinyl chlo- ride, allowing total inspection of the annular space, which may eliminate the need for expensive leak detection systems in above-ground applications.

Polyvinyl chloride’s chemical resis- tance, high tensile strength, and good impact resistance is ideal for a broad range of applications. Pressure rated up to 75 psi the Contain-It system will assure quick positive tests and pro- vides enough safety factors for most carrier failures. The system’s retrofit capability and chemical resistance make it an ideal choice for contain- ment piping of chemical process lines.

Circle 410 on the reader service card

Paint Mix Room Solutions Grace Inc. Minneapolis

Grace Modular Solutions are inno- vative equipment solutions that allow automotive and industrial manufactur- ers to select packaged equipment sys- tems and modules for pumping, agita- tion, storage, and transfer applications. The Modular Solutions provide manu- facturers with the opportunity to create the right solution for any material, pressure, requirement, or plant contig- uration with the highest quality com- ponents. The Modular Solutions offer

56 METAL FINISHING . DECEMBER 1997