security · reliability · efficiency · safety · mobile - plate ∙ the barrier is mounted on a...

of 15 /15

Upload: others

Post on 13-Oct-2020




0 download

Embed Size (px)


Page 1: SECURITY · RELIABILITY · EFFICIENCY · SAFETY · Mobile - plate ∙ The barrier is mounted on a wide steel plate which can be easily deployed for mobile solutions or installed permanently
Page 2: SECURITY · RELIABILITY · EFFICIENCY · SAFETY · Mobile - plate ∙ The barrier is mounted on a wide steel plate which can be easily deployed for mobile solutions or installed permanently

·BGI is a leading provider of gate, barrier and perimeter protection solutions.

Specializing in anti-ramming bollards and gates, and advanced access control, BGI protects facility perimeters worldwide.



Page 3: SECURITY · RELIABILITY · EFFICIENCY · SAFETY · Mobile - plate ∙ The barrier is mounted on a wide steel plate which can be easily deployed for mobile solutions or installed permanently


Engineered to meet the most exacting international standards for anti-ramming products, BGI's bollards and gates are able to withstand impacts and provide a safe and secure barrier for your facility entrances and exits. Our innovative cable barriers are industry leaders in mobile or fixed solutions and our pneumatically operated anti-ramming bollards have been designed to provide maximum performance and reliability.Protecting sensitive military and government facilities and commercial compounds around the world, BGI intelligent barriers will meet all your protection needs and our team of physical security consultants will work with you to ensure the optimum solution to your security challenges.


The demands of high volume traffic at border crossings, stations, airports and key urban locations require a fast and efficient barrier solution. BGI designed its pneumatically operated light arm barriers, hollow spike systems and bollards to meet this need. BGI products are deployed at some locations that demand in excess of 5,000 opening/closing cycles per day.The pneumatic operation of these high-speed systems provides trouble-free operation around the clock and the simple and reliable infrastructure results in very low maintenance requirements.


BGI arm barriers, spikes and bollards are combined to provide optimum solutions to many different parking challenges. When combined with advanced access control, BGI barrier solutions provide a perfect balance of protection, monitoring and control.Designed to resist vandals and provide high reliability for unattended locations, the BGI pneumatic or electrically operated barriers are deployed extensively at public and private card parks and compound entrances. License plate recognition, cellular phone activation, biometric checks or simple remote controls are all used to provide levels of security to meet our clients' needs.



Page 4: SECURITY · RELIABILITY · EFFICIENCY · SAFETY · Mobile - plate ∙ The barrier is mounted on a wide steel plate which can be easily deployed for mobile solutions or installed permanently











16 sPIKE sysTEms



















25 sERvICEs





Page 5: SECURITY · RELIABILITY · EFFICIENCY · SAFETY · Mobile - plate ∙ The barrier is mounted on a wide steel plate which can be easily deployed for mobile solutions or installed permanently


BGI is a pioneer in the innovative use of air pressure to power its products. Particularly suited to high volume traffic flows or multiple barrier installations, pneumatic power has been selected for large compound entrances, border crossings and smaller installations where gates and bollards or spikes must be synchronized.

∙ High operating speeds

∙ Reliable

∙ Low maintenance

∙ Continued operation after power failure

∙ Simplicity

∙ Ease of synchronization


Pneumatic arm barriers and spikes can be raised and lowered in an exceptionally short time of as little as 1.5 seconds. This significantly improves traffic control where peak flows at the beginning and end of work days must be considered.


By regulating the air pressure, not only can the speed of the barriers be finely adjusted, but different speeds can be set for opening and closing.


Pneumatic barriers contain very few moving parts since they are operated by a piston powered by a remote compressor. There are no motors or gears to maintain or jam.


The piston is rated to 10 million operations before the gaskets need replacing. This results in a very low MTBF.


An air compressor can be sited at a location distant from the barriers and a single air source can be used to power multiple sets of barriers or gates. The compressors and air tank are sized for each project creating a most efficient infrastructure.


With both the bollards and barrier arm operated by compressed air from the same power (air) source, it is possible to perfectly synchronize the opening of the gate with the lowering of the bollards or spikes. Achieving this same level of synchronization with motors or hydraulics is challenging and is likely to be difficult to maintain over time without regular adjustment and extra expense.


Vandalism and sabotage are much more difficult with the pneumatic arm due to the simplicity of the mechanism. There are no gears to jam or motors to burn out.


In the event of loss of power to an electronic barrier, it becomes inoperable. In the case of pneumatic barriers, since the compressor feeds a cylinder which acts as a reservoir and does not feed the arm/bollards directly, there is always a volume of compressed air available as a back up. In the event of a power failure, a pneumatic arm can typically continue to operate for between 5 and 10 cycles.




Page 6: SECURITY · RELIABILITY · EFFICIENCY · SAFETY · Mobile - plate ∙ The barrier is mounted on a wide steel plate which can be easily deployed for mobile solutions or installed permanently


Suitable for both high-security and traffic control, BGI's B-series bollards have been proven to be durable, reliable and a perfect solution for heavy duty applications.

The wide range of bollards offered by BGI provides a cost-effective solution for every site. The automatic, semi-automatic and fixed versions are all engineered to meet international anti-ramming standards.


Operated either pneumatically or hydraulically, the B3000 series offers the highest standard of anti-ramming and security protection. Taking as little as 2 seconds to reach the fully raised position, these bollards can be used in the most demanding locations where high-volume traffic flows must be managed.

The B3000 bollards are often combined with light arm barriers to provide maximum deterrence and safety. With a hard-wearing stainless steel finish,

the bollards are engineered to meet the DOS and PAS standards for anti-ramming and are used extensively to protect sensitive government and military locations as well as civilian compounds.

When powered by BGI's innovative pneumatic system, the bollards can be operated at very high speeds and when combined with a light arm, the air pressure can be used to simply and accurately synchronize with other elements in the system. The use of air pressure also significantly reduces the wear and tear on the components and provides years of maintenance free use.

With a patent-pending mechanism for releasing the internal piston, the bollards can be maintained without disassembly and if necessary, the entire unit can be removed without the need for digging out the foundations.


Designed with simplicity of operation in mind, the B4000 bollards contain a gas-filled piston which automatically raises the bollard and locks it into position when the key is inserted.

To lower the bollard, the key is inserted to release the lock and then steady pressure is applied to the top. When the bollard is fully lowered, it automatically locks in position.

Keys for the B4000 series are cut in such a way as to thwart attempts at forcing the bollards closed. The piston is engineered to the highest standards and can easily be removed for maintenance.


B3100 B3200 B3150 B3250 B4000

Bollard Type Automatic Automatic Automatic Automatic Semi-automatic

Height 1000 mm 700 mm 1000 mm 700 mm 600 mm

Diameter 270 mm 220 mm 270 mm 220 mm 220 mm

Maximum Speed 4 secs. 2 secs. 5 secs. 4 secs. N/A

Mechanism Pneumatic Hydraulic Manual Assisted

Power Supply 5 – 6 ATM air pressure 110 – 240V AC (Compressor)

110 – 240V AC N/A

Options Remote tank capacity indicator


With a wide range of shapes, sizes and materials, BGI's decorative fixed bollards are a cost-effective and efficient way of marking and protecting a perimeter or traffic line.


B5010 B5020 B5030 B5040 B5045 B5050 B5060

Bollard Type Fixed Fixed Fixed Fixed Fixed Flexible Fixed Interlocking

Material Cast Iron Cast Iron Cast Iron Stainless Steel Stainless Steel Plastic Cast Iron

Height 630 mm 630 mm 300 mm 600 mm 800 mm 750 mm 1100 mm

Diameter 250 mm 250 mm 300 mm 160 mm 220 mm 75 mm 100 mm

B5010 B5020 B5030

B5040 | B5045 B5050 B5060

10 11

Page 7: SECURITY · RELIABILITY · EFFICIENCY · SAFETY · Mobile - plate ∙ The barrier is mounted on a wide steel plate which can be easily deployed for mobile solutions or installed permanently


Designed to completely close an entrance line to a facility and bring vehicles to a rapid halt, BGI's K-series drop arm cable barriers are the barriers of choice for military, government and commercial installations around the world.

The K-series barriers, with their unique dual cable systems and hydraulic or pneumatic operation protect government and corporate compounds and border crossings. With its unique cable system, the K-series barriers provide high-security to any location where an anti-ramming or anti-theft solution is required.

Installation configurations suit all sites, and options include surface-mounting for temporary or mobile use, side foundations or shallow cross-road foundations.

K6000 ∙ Engineered to meet the demanding requirements of the military, the K6000 series offers maximum protection against a ramming vehicle. With configurations suitable for military or civilian installations, this barrier has been proven in the field to stop vehicles in their tracks.

K5000 ∙ The K5000 was developed in response to a demand for a cable barrier which would close a perimeter line and provide anti-ramming protection at lower threat levels than the K6000. The single-cable design offers an elegant barrier with a low profile.


BGI's K-series cable barriers are constructed to provide the highest level of protection against ramming. In the event of an attempt to break through the barrier, the cables, which are hidden in the body of the gate arms, capture the chassis of the vehicle and transfer the energy of the moving vehicle to the concrete anchors. These anchors, which can be surface mounted or below-surface, then wrap around the vehicle and bring it to a complete halt.


Engineered to meet both the US DOS and UK PAS standards, the unique K-series anti-ramming design has been proven in the field against threats including terror and theft. The K-series barriers are installed across the world and are the de-facto standard for drop arm barrier solutions for the security services and military in a number of countries. The K6000 and K5000 are also used extensively to protect commercial interests with the two-way barriers preventing threats from entering or exiting.


The K6000 series barriers are operated by an electro-hydraulic mechanism providing superior operation and unprecedented reliability. The K5000 barrier is operated by a unique pneumatic mechanism resulting in very low maintenance, fast and reliable operation.

In both cases, opening time is user definable between 5 and 180 seconds and the opening and closing speeds can be set independently. The barriers are simple to install, require little maintenance and can be connected to 110 – 240V AC or 24V DC for a truly mobile solution (K6000 only).


Mobile - anchored ∙ Surface mounted anchors are placed on the ground at either end of the barrier. This allows for quick deployment of an anti-ramming solution and provides a particularly innovative solution to the varied and changing needs of the police and military.

Mobile - plate ∙ The barrier is mounted on a wide steel plate which can be easily deployed for mobile solutions or installed permanently where deep foundations are not possible. On impact, the entire barrier tips up, thereby wedging the plate into the vehicle and bringing it to a stop.

End-point foundations ∙ In this fixed configuration, the anchors are installed underground in order to provide a more elegant appearance. This solution is typically used in urban areas where the anchors must be hidden to preserve the aesthetics of the neighborhood.


K6000 K6005 K6010 K5000

Barrier Type Dual cable drop arm Dual cable drop arm Dual cable drop arm Single cable drop arm

Mobile/Fixed Mobile Fixed or Mobile Fixed Fixed

Foundations End-point surface anchorsDepth = 0 cm

Mobile: No foundationFixed: Cross road plate (Depth = 4 cm)

End-point foundationsDepth = 70 – 100 cm

End-point foundationsDepth = 70 – 100 cm

Mechanism Electro-hydraulic Electro-hydraulic Electro-hydraulic Pneumatic

Power Supply

110 – 240V AC12 or 24V DC

5 – 6 ATM air pressure 110 – 240V AC (Compressor)

Dimensions Length: Up to 600 cmWidth: 180 cmHeight: 90 cm

Length: Up to 500 cmWidth: 70 cmHeight: 60 cm

Options Battery backupManual hydraulic pump

Remote tank capacity indicator

12 13

Page 8: SECURITY · RELIABILITY · EFFICIENCY · SAFETY · Mobile - plate ∙ The barrier is mounted on a wide steel plate which can be easily deployed for mobile solutions or installed permanently


BGI's L-series are industry leading high-volume, low maintenance administrative arm barriers. When synchronized with bollards or spikes, the combination becomes an effective anti-ramming solution and is used extensively to protected entrances worldwide.

Specifically engineered for high traffic flows and low maintenance, the L-series sets new standard in reliability. With its anti-vandal design, the L-series can be installed in both manned and unmanned locations in remote and urban facilities.

Suitable for border crossings, car parks and entrances to compounds, the L-series can be integrated into a range of access control and intruder detection systems to provide a comprehensive perimeter security solution.

Strong ∙ Safe ∙ High performance ∙ Reliable ∙ Low maintenance ∙ Anti-vandal


With its unique pneumatic system, the L2000 arm barrier system provides a solution to very high volume traffic flows. Opening times of 1.5 seconds can be achieved, but the pneumatic operation results in very low maintenance since the air pressure ensures minimal wear on the system components.

With no gears to jam or motors to burn out, the simple piston mechanism is rated at 10 million operations between gasket replacements.


The L1000 electrically operated arm barrier is installed at thousands of entrance ways and provides a reliable solution to single lane or lower-volume use.

By separating the drive mechanism from the gear mechanism, BGI engineers have managed to solve a problem that plagues traditional light arm barriers. Where direct drive motors are typically employed, horizontal pressure from a vehicle impact or vertical pressure from vandals or attempts to force the arm, will result in severe damage to the motor which is usually irreparable. In the L1000 electrically operated barrier, pressure on the arm may damage the arm, but the drive mechanism will not be affected.

The powerful 0.5 HP motor will quietly and efficiently operate the barrier in attended or unattended locations and the controller can be integrated with a variety of access control options.


L1000 L2000

Barrier Type Light arm barrier Light arm barrier

Mechanism Electric Pneumatic

Power Supply 0.5 HP Motor110 – 240V AC

5 – 6 ATM air pressure 110 – 240V AC (Compressor)

Arm Dimensions Length: 3 – 6 m76mm x 44mm Aluminium box section

Length: 3 – 5 m76mm OD Aluminium tube

Speed 4 – 6 seconds From 1.5 seconds

Cycles per hour 100 250

Cycles per day 1000 5000

Options Arm Light•Stop Sign•Skirt•

Safety Infrared sensors•Warning lights and/or traffic lights•

14 15

Page 9: SECURITY · RELIABILITY · EFFICIENCY · SAFETY · Mobile - plate ∙ The barrier is mounted on a wide steel plate which can be easily deployed for mobile solutions or installed permanently

s-sERIEs sPIKE sysTEm


Bollards, gates, roadblocks and cable barriers will bring a vehicle to a complete and immediate halt but passengers are likely to be severely injured or killed by the impact.

It has been shown that for certain applications such as border crossings, a run on a barrier may be with criminal intent, but could also be a result of driver error.

BGI was therefore requested to design a system to effectively bring a vehicle to a halt whilst ensuring the safety of the passengers. The resulting spike system has been deployed extensively at border crossings and car parks to provide an effective solution to this problem.


The S1000 spikes are powered by a pneumatic system resulting in fast and reliable operation.

By regulating air pressure rather than power to gears and motors, the system controller is able to accurately synchronize the movement of the spikes with the light arm barrier above.

Safety features ensure that the barrier is always down when the spikes are in the raised position. Opening time can be as short as 2 seconds and the opening and closing speeds can be set independently.


The spikes are housed in 1 meter long segments which can easily be removed for maintenance. The spikes themselves can be individually replaced with little effort. Pneumatic operation of the system results in very low maintenance since there are no gears or motors and very few moving parts.

Given the extreme conditions under which the S1000 spike system is installed, BGI engineers took special care to design for all weather conditions. The large diameter of the spikes prevents blockages and allows rain and snow to drain through the system.

PAssIvE 1-WAy sPIKEs

For lower security applications, surface mounted passive 1-way spikes can be installed which incorporate spring loaded spikes which are lowered by the movement and weight of the car as it passes in the correct direction. Any attempt to pass over the spikes in the wrong direction will result in multiple tire punctures. The spikes incorporate a screw mechanism to allow them to be manually locked in the down position to temporarily enable vehicles to pass in the wrong direction.


S1000 S2000

System Type Active 2-way spikes Passive 1-way spikes

Mobile/Fixed Fixed Fixed

Foundations 500 mm Surface mounted

Mechanism Pneumatic Spring-loaded manual

Dimensions L: 4.5 – 7 mW: 270 mmD: 330 mm

L: 900 mmW: 230 mmH: 105 mm

Maximum Speed 2 secs. N/A

Power 5 – 6 ATM air pressure 110 – 240V AC (Compressor)



The unique and innovative S1000 spike system was developed with the specific aim of bringing a vehicle to a halt without harming passengers. Designed to rip tires apart and even withstand the latest generation of run-flat tires, the S1000 has been proven in the field as a particularly effective solution for border crossings and locations where vehicles pass at high speed.

Pneumatically operated and typically synchronized with a light arm barrier, the S1000 system comprises a set of hollow spikes which cross the entire width of the lane. When the barrier is down, the spikes

are locked in the raised position and when the barrier is raised, the spikes are lowered into the ground allowing cars to pass over safely.

The hollow spikes have been engineered to ensure that a vehicle will be disabled irrespective of the approach direction. The height and width of the spikes have been specifically designed to rip apart both small private vehicle tires and large commercial vehicle tires. Even run-flat tires which use either the solid wall or wheel band method, are similarly disabled by this system which is particularly ruthless in its ability to shred a tire and damage the wheel.

Suitable for all weather conditions, the spike system incorporates a self-cleaning mechanism and drainage.

16 17

Page 10: SECURITY · RELIABILITY · EFFICIENCY · SAFETY · Mobile - plate ∙ The barrier is mounted on a wide steel plate which can be easily deployed for mobile solutions or installed permanently


BGI's wedge roadblocks are the anti-ramming solution of choice for the highest security installations where full width lane protection is required. With their quick deployment and ability to bring a vehicle to a complete halt, the R1000 roadblocks are engineered to meet the most demanding security standards.

The R1000 roadblock is suitable for the protection of sensitive government and military locations and of entrance ways to key infrastructure compounds.

With a shallow 53 cm foundation and an efficient hydraulic mechanism, the R1000 roadblock is simple to install and operate and requires minimal maintenance. The roadblock can be activated using a range of access control solutions and can be fully integrated into perimeter security systems.

∙ Highest protection level

∙ Fast operation

∙ Reliable

∙ Low maintenance



Barrier Type Wedge roadblock

Mechanism Hydraulic

Power Supply 3 HP Motor110 – 240V AC

Foundation Length: 4200 mmDepth: 530 mmWidth: 2200 mm

Deployment Speed 4 seconds

Cycles per hour 80

Cycles per day 800


Engineered to meet the extreme demands of large openings, BGI's heavy duty cantilever gates have been supplied with spans of up to 30 meters to close 60 m wide border crossings. The gate moves over steel roller bearings fitted on a carrying frame, which allows the wing to hover above the ground and move across sloping or uneven surfaces without the need for a track.

Suitable for large openings to compounds, government or military installations or border crossings, BGI's cantilever gates are custom built to meet all local topographical and environmental constraints.

OPERATIONThe gate is powered by a high-quality, heavy-duty 2.5 horsepower electric motor with a clutch that can be neutralized during a power outage. The rack and pinion track allows the gate to move smoothly and the exposed rollers can be serviced without the need to disassemble the gate.


Safety features include two pairs of photo electric sensors to halt movement if a vehicle or person passes during operation, and a clutch for neutralizing or reversing the motor in the event of a collision with a person, vehicle or any other object.



Barrier Type Cantilever gate

Mechanism Electric

Power Supply 2.5 HP Motor110 – 240V AC

Dimensions Length: Up to 30 mHeight: 2000 mmWidth: 350 mm

Speed 20 m / sec

18 19

Page 11: SECURITY · RELIABILITY · EFFICIENCY · SAFETY · Mobile - plate ∙ The barrier is mounted on a wide steel plate which can be easily deployed for mobile solutions or installed permanently


BGI is proud to offer a selection of the most advanced systems for access control. Any of our hydraulically, electrically or pneumatically operated bollards, gates, barriers or spikes can be controlled by these access control methods most of which can in turn be integrated with ease into other enterprise systems.

From simple push button activation to advanced biometric control. BGI offers an access control system to meet every security level and budget.


This innovative, reliable and effective system allows gates or barriers to be activated by using cellular phones.

In order to open the gate, the cellular phone number of the caller must be pre-registered in the system. Phone calls are free since the system does not answer the call and use air time, rather it uses the Caller ID of the calling phone which it checks against a predefined list.

A PC or phone based management console allows access to be defined on an hourly or daily basis and one-time visitors can be granted access by registering their phone details and expected arrival time/date in advance. The system can also be programmed using SMS text messages.

The system can store over 5000 phone numbers and is suitable for all types of installations including car parks, closed residential communities, private homes and commercial compounds.

Celllular phone activation uses the GSM phone system and phones must have Caller ID enabled in order to activate the gates.


For world class security, a biometric solution ensures that only approved people enter the facility. Our RF-based fingerprint identification system for physical access control incorporates high-speed one-to-many matching, ensuring an unparalleled level of security and user-friendliness

∙ Encryption at the sensor level

∙ Innovative live sensing security features

∙ Sensor unit includes a proximity card reader

∙ Robust, suitable for diverse stand-alone, networked and integrated applications

∙ Wireless and wired solutions

BGI's biometric access control system ensures that fingerprints are actively read from the live tissue (dermis) layer. The sensor is unaffected by abrasions, small cuts and dirt on fingers and 360° fingerprint rotation results in a very user-friendly solution.

The reader is not sensitive to extreme temperatures or direct sunlight on the sensor and information is stored only on the Biometric Processing Engine, which is installed at a protected location, separately from the sensor. To prevent misuse and protect user privacy, encrypted biometric templates cannot be converted back into the original fingerprint image.

A user friendly management application can maintain and control up to 150 reader units from a single computer.

LICENsE PLATE RECOGNITIONLicense Plate Recognition systems detect and read vehicle license plates for traffic enforcement, toll roads, border control, security, access control, parking systems, and many other applications.

BGI offers a sophisticated vision-based License Plate Recognition system that identifies number plates on stationary or slowly moving vehicles approaching a barrier or gate.

The combined camera/illumination unit compares the recognition result to an authorization list and opens the gate if the vehicle is authorized. Authorized vehicle numbers are stored on the unit's local database. Users can change the authorization list, as well as other parameters, using a special web server application.The system in its typical configuration will recognize a license plate in less than 0.5 seconds and the detection range is 4.0 -to 7.0 meters with a standard lens. Multiple cameras can monitor a single lane for increased security and reliability.

With its ability to operate continuously during the day and night, including adverse weather conditions, BGI's LPR solution can be run as a standalone system or integrated into an enterprise IT environment for full control and tracking of vehicle movement.

Remote Control Magnetic Card / Proximity Card

PIN Code Keypad Operator Panel


20 21

Page 12: SECURITY · RELIABILITY · EFFICIENCY · SAFETY · Mobile - plate ∙ The barrier is mounted on a wide steel plate which can be easily deployed for mobile solutions or installed permanently




BGI offers a complete perimeter protection solution in the form of a new generation vibration perimeter fence sensor system designed to handle all aspects of perimeter protection. It upgrades any existing fence to the status of an electric barrier with an exceptional detection resolution of +/- 10 meters.

Wherever perimeter protection and intrusion detection are required, BGI provides a system that is easy to install, operate and maintain. The long life sensor units are easily attached to the fence at approximately 3 meter intervals and are highly immune to extraneous environmental factors.

∙ Very low false-alarm rate due to a special software algorithm.

∙ All weather operation.

∙ User friendly interface.

∙ Easy to install and maintain.

∙ Can be installed on almost any type of existing fence

∙ Battery back-up.

∙ Allows manual or automatic sensitivity adjustment according to the protecting perimeter characteristics and weather conditions.

∙ Allows neutralizing sections without affecting the detection capability of the entire perimeter.

PRINCIPLE OF OPERATION The perimeter intrusion detection principle is based on "reflected wave technology" that works in a similar way to radar.

Each perimeter control unit (PCU) transmits electric pulses into the sensor line. When an intrusion attempt occurs along the perimeter, it will be detected by a reflected wave from the nearest sensors. The time delay between the transmitted and the reflected wave will determine the location of the event within +/- 10 meters resolution.

This radar-like principle simplifies the structure of the system while offering advantages that other technologies are unable to provide. The sensor line, which consists of only one twisted-pair cable, simplifies the installation and maintenance and is protected by an end of the line resistor against any tampering with the system.

sysTEm CONFIGuRATIONThe system can be supplied stand-alone, or can be integrated with any other security system such as IR sensors, CCTV, PTZ cameras, access control systems, VMD solutions, wireless communication systems etc

BGI offers a complete range of accessories to complement its barriers, gates and access control systems. Some are off the shelf products whilst others are custom made according to the client’s needs.

PARKING REsTRICTORThese durable parking restrictors provide an aesthetic and practical delimiter for parking spaces and will prevent damage to vehicles and buildings. Constructed entirely of rubber, they are long-lasting, easy to install and can withstand extremes of temperature.

sPEEd BumPsIdeal for slowing down vehicles without causing damage, these speed bumps are modular and can be combined to provide the required width. Constructed entirely of rubber, they can withstand the pressure of constant vehicle passage and are suited to all weather conditions.

sPECIFICATIONs T1100 T1150 T1200

Type Parking Restrictor Parking Restrictor Speed Bump

Material Rubber Rubber Rubber

Height 135 mm 135 mm 56 mm

Length 1780 mm 900 mm 1830 mm

Width 152 mm 152 mm 300 mm


Red/green traffic light are available in two sizes with either 200 mm or 35 mm diameter lenses

Rotating warning lights are available in either yellow or red.


Controllers are custom built according to the installation configuration.

OPERATOR CONTROL PANELs Operator Control Panels are custom built according to the installation configuration.

T1300/T1350 T1400 T1500



22 23

Page 13: SECURITY · RELIABILITY · EFFICIENCY · SAFETY · Mobile - plate ∙ The barrier is mounted on a wide steel plate which can be easily deployed for mobile solutions or installed permanently

servicesThREAT ANd RIsK ANALysIs

As the first step to planning an upgrade either to your perimeter security or your facility's security in general, BGI recommends a complete threat and risk analysis. Undertaken by leading physical security consultants, this study is the first step to understanding the level of your current protection and your vulnerability.

A threat and risk analysis report will tell you:

∙ Which threats are relevant to your facility and how seriously they should be taken.

∙ Where are the vulnerabilities in your buildings, technology and procedures.

∙ In what priority the vulnerabilities should be addressed.The study can focus specifically on perimeter security or the scope can be expanded to cover your entire facility.


BGI is able to call upon a team of world class security consultants to offer a complete physical security consulting service. Specializing in physical security, our experts are able to advise on a wide range of subjects relating both to building and technology:Physical ∙ Architecture, windows, structure, landscaping, perimeter, entrances, exits and all other physical elements.Technological ∙ Surveillance, control room, access control, screening equipment, alarm, detection systems, information security, and security related technology.Our team of experts has worked with governments and corporations world wide and will be happy to assist you with the design and implementation of complete physical security solutions which incorporates BGI perimeter security protection.


Through our worldwide network of distributors and dealers, BGI are pleased to be able to provide installation and maintenance for our entire range of products. Installations for complex entrance designs can be handled entirely by our team as turn-key projects, or alternatively the products can be supplied for simple installation.


Many of our products can be customized to your needs. Our design and engineering team will be happy to discuss your requirements and work with you to develop a solution.Access control often needs to be integrated with other security systems or enterprise IT and our specialists will ensure seamless implementation and integration with your existing environment.


Page 14: SECURITY · RELIABILITY · EFFICIENCY · SAFETY · Mobile - plate ∙ The barrier is mounted on a wide steel plate which can be easily deployed for mobile solutions or installed permanently

For more information, please contact


BgI headquarter office

10 hasadan


Israel 58815


Tel: +972 3 550-0465

Fax: +972 3 558-3113


email: [email protected]

Page 15: SECURITY · RELIABILITY · EFFICIENCY · SAFETY · Mobile - plate ∙ The barrier is mounted on a wide steel plate which can be easily deployed for mobile solutions or installed permanently