select interior emulsion matt - asian paints berger …...select interior emulsion matt surface dry...
TRANSCRIPT
SELECT INTERIOR EMULSION MATT
Surface dry
15 Minutes
Touch dry
30 Minutes 4 hrs. 16 - 18 hrs.
Recoatability Hard Dry
PRODUCT DESCRIPTION
It contains alkali resisting pigments and has good scrub resistance, washability and fungicidal properties
RECOMMENDED AREAS OF APPLICATION
Area of Use: Interiors
TECHNICAL DATA
Shade / Colour Range : As per selected shades of BERGER Colourworld Fandeck and BERGER Emulsion Shade Card Dark shades of BERGER Shade Card are available only on special order basisComposition Nominal : Acrylic Copolymer Emulsion
% Volume Solids : 38 ± 2 %Pack Size : 3.6 LTR, 18 LTRTheoretical Coverage : 9 - 10 Sqm. / lit. @ 40μ DFT
Drying time 30° :
APPLICATION DATA
Method of application: Brush, RollerThinner: Municipal/Potable WaterThinning ratio (by vol.): Use 5% to 10% thinner for ease of application depending on the method of application
SURFACE PREPARATION
The performance of this coating is directly related to the degree of surface preparationConcrete, Plaster, MasonryEnsure surface is clean, dry and free from all contaminants. Surface must be sound and free from laitance. Remove laitance by wire brush or sweep blastIf the surface is previously painted and is dusting, chalking or friable, ensure that all friable and loose material are removed by
Antifungal Solution and allow to dry. Apply one coat of BERGER Plastaseal Penetrating Sealer and allow to dry
and weatherboards
APPLICATIONS DETAILS
Apply one coat of PVA or Decora Primer Sealer. After drying, sand lightly, apply BERGER Stucco PuttyAfter drying Sand with emery paper 320 and topcoat with Select Emulsion PaintFor best results apply 2 coats
Apply uniformly by convenient method of application, after thinning the paint to obtain the desired level of consistency2nd coat to be applied only after 3 - 4 hrs drying of the 1st coat
RECOMMENDED PAINT SYSTEM
One coat x Berger Decora Primer Sealer / Berger PVA Primer / Berger AR PrimerOne or Two coat(s) x Berger Stucco PuttyTwo coats x Berger Select Interior Emulsion Matt
STORAGE, SAFETY INFORMATION AND PRECAUTIONS
Safety information and precautions:• Do not apply at temperature below 10°C• Provide adequate ventilation during use• Keep out of reach of children• Avoid contact with skin and eyes, wear suitable Personal Protective Equipments such as overalls, goggles, dust
masks and gloves
DISCLAIMER
The information provided in this data sheet is not intended to be complete. It is the responsibility of the user to ensurethat the product used is suitable for the purpose it is meant to serve.
performance, nor do we accept any liability arising from use of this product, unless specifcally agreed to in writing by us.The information provided in the datasheet may be modifed by us without notice.