selecte - hallandale beach, florida 10a/supp... · web view2015/12/16 · 1 s.w. 3r d street...

EXHIBIT 6

·HortonEMERGENCY VEHICLES

Hall-Mark Fire--3431 NW 27th Ave--Ocala, FL 34475

CATEGORIES:A Chassis

B Body Connection Pass Thru Type

BH Chassis Accessories

BL Chassis Electrical

C Conversion Model

CB Module Body Modifications

D Module Body Hardware

E Paint and StripingHALLANDALE BEACH FIRE RESCUE121 S. W. 3RD STREET HALLANDALE BEACH, FL 33009 TIM WILEY

Year: 2016

Chassis: Freightliner Medium, 108"Type: MED

Model: 623

Revl Close 11877

Prepared By: Michael Dav

F Cabinet Doors, Handles and Hardware

G Interior Colors

H Interior Cabinets, Streetside

I Interior Cabinets, Curbside

J Front Wall Cabinets

K Interior Accessories and Trim

L Cot Mount, and Patient Handling

M Warning Systems, Visual

MN Warning Systems, Audible

0 Lights, Non Emergency

P Electrical Power Group

Q Heat, Ventilation, Air conditioningR Console, Radio, and communications

T Oxygen and Suction

V Lettering and Graphics

Z Other

,

HALLANDALE BEACH FIRE RESCUE121 S.W. 3RD STREETHALLANDALE BEACH, FL 33009 -·Horton

Selected Feature List 11877Year: 2016

TIM WILEY � .EMERGENCY VEHICLES Chassis:Model:

Freightliner Medium, 108"

623

Option Std Qt y Header!Desc , jvtion!Dat a Proposal Total

AB Horton Erner enc Vehicles Feature List

AHL 1 FREIGHTLINER CHASSIS

0 WALK THROUGH CHASSIS MODIFICATION FOR FREIGHTLINERCHASSIS

ba300000 Type 1 Freightliner chassis to be modified to provide walk throughaccess to the patient area.

AHL62516 0 CHASSIS, 2016 FREIGHTLINER M-2, 108" CIAThe chassis required to complete the ambulance conversion shall besupplied by Horton. See chassis specification for furtherinformation.

REFERENCE QUOTE# 09/21/2015 10:31 AM

!!! CHASSIS WILL INCLUDE STEEL WHEELS!!! AIR HORNS ON HOOD' I ' VERTICAL EXHAUST!!! CHASS1S WlLL ARRIVE FROM FREIGHTLINER PAINTED L2187EB LIME GREEN.Horsepower: 250!!! HORTON TO SUPPLY AND INSTALL A WHITE VINYL OVERALL HEIGHT STICKER ONDRIVER WINDSHIELD.

AHLSP001 0

AJNSPICO

SPECIAL INSTRUCTION FOR FREIGHTLINER CHASSIS

!!! RELOCATE THE HEAT/AC CONTROLS IN THE CHASSIS DASH PER PREVIOUS VEHICLE. SEE PHOTOS.

1 CHASSIS INTERIOR COLOR SHALL BE GRAY

I B CHASSIS MODIFICATIONS HARDWARE AND ACCESSORIES

Hall-Mark Fire Tuesday, October 27, 2015Michael Day 2:12:26 PM Rev 2

Close of 38

HALLANDALE BEACH FIRE RESCUE Selected Feature List 11877121 S. W. 3RD STREETHALLANDALE BEACH, FL 33009 -·Horton Year: 2016

TIM WILEY - .EMERGENCVYEHICLES Chassis:Model:

Option S t d Qty He a d er!Desc,jption!Data Proposal Total


623

BH02GOOO

BH02HOOO

BH03AOOO

BH03BOOO

BH04AOOO 0

BH04JOOO

BH060000 0

BH11DOOO 0

HUB & LUG NUT COVERS, STAINLESS FOR FREIGHTLINER 19.5"Polished stainless steel hub and lug nut covers shall be installed on all four outside wheels.

! ! ! THESE ARE TO BE FULL WHEEL SIMULATORS ILOS.

TIRE SIZE, 19.5", MEDIUM DUTY:This vehicle is specified to have 19.5" tires.

MUD FLAPS: frontInstall rubber mud flaps behind each front tire.

MUD FLAPS: rearInstall individual rear mud flaps behind each set of rear wheels.

FREIGHTLINER CHASSIS EQUIPPED W/ VERTICAL EXHAUSTThe chassis specified above is to include a vertical exhaust.

Note: Freightliner chassis with vertical exhaust will require selection of a battery compartment option listed under the compartment section.

CHASSIS INCLUDES A CUMMINS B 6.7L ENGINEThe chassis specified above will have the standard cab height.

REAR DOCK BUMPERSTwo rubber dock bumpers shall be bolted to the rear step end caps for protection when backing.

ENERGY ABSORBING REAR FLIP-UP STEP:Install an energy absorbing rear step/bumper assembly. The center section of the step will flip up for cot loading. When flipped down the center section must be held down so as not to rattle while the vehicle is in motion.

! ! ! RAISE REAR STEP APPROX 3" BY NOTCHING THE REAR RISER. EXTEND THE BUMPER 1" AWAY FROM THE RISER SO IF IMPACTED FROM BELOW, BUMPER WILL CLEAR RISER.

Hall-Mark Fire Michael Day

Tuesday, October 27, 20152:12:27 PM Rev 2

Close!'age 3 of 38

HALLANDALE BEACH FIRE RESCUE121S.W. 3RDSTREETHALLANDALE BEACH, FL 33009 -·Horton


TIM WILEY - .EMERGIENCVVEHICLES Chassis:Model:

Option Std Qty Header/Description/Data Proposal Total


623

BH20TOOO 0

BH260000 0

BH320ROO

BHSPD006

BL26BOOO

BL26LOOO 0

CHROME TURNOUT FOR VERTICAL EXHAUSTA chrome turnout shall be installed on the vertical exhaust of medium duty chassis.

FUEL TANK COVERS, DIAMOND PLATE, FOR FREIGHTLINER M2 CHASSISDiamond plate step well covers shall be installed on both the curb and street side cab step wells. The covers shall be made of.125"thick polished diamond tread plate with 6061-T6 alloys orgreater.

!!! INSTALL STANDARD STEP AND TRIM. DO NOT DUPLICATE PREVIOUS VEHICLES.

SUSPENSION SWITCH:dump overrideA switch will be installed where specified, to override the automatic dump feature activated by the left rear patient compartment entry door.

SWITCH LOCATE: INNER PANEL OF RIGHT REAR ENTRY DOOR PER DRAWING!!! PROGRAM SO VEHICLE REMAINS DUMPED WHEN IGNITION IS TURNED OFF.

MIRROR:OEMThe mirror set shall be OEM supplied, and installed by the chassis manufacturer.

BACKUP ALARM RESETBackup alarm to automatically reset to on if alarm was manually canceled using the control panel alarm cut-off switch (FL25) during previous use.

DUAL PURPOSE CAMERA SYSTEM, BACKUP AND PATIENT AREA VIEWINGInstall a Voyager VCCS155 backup camera over the rear doors. Install a second camera on the interior of the vehicle as noted below. Install a Voyager AOM711 7" LCD screen in the cab rearview mirror area. Wire to activate the backup camera when the vehicle is placed into reverse. The second camera is to provide a view of the patient area when selected.

INTERIOR CAMERA LOCATION: HEADER OVER REAR DOORS.

INTERIOR CAMERA LOCATION: CLOSE-OUT ABOVE THE REAR ENTRY DOORS.

!!! INSTALL (2) BULLET CAMERAS #VCCSIDL WT & VCCSIDR WT FOR BLIND SPOT MONITORING. LOCATE ONE ON THE STREETSIDE AND ONE CURBSIDE FORWARD CAB DOORS IN THE LOWER FORWARD POSITION TO ACTIVATE WITH THE RESPECTIVE TURN SIGNAL.!!! SYSTEM REQUIRES A VOYAGER #AOM7694 MONITOR WITH (4) INPUTS.


Tuesday, October 27, 20152:12:27 PM Rev2

Close of 38

HALLANDALE BEACH FIRE RESCUE

Selected Feature List 11877121 S.W. 3RDSTREETHALLANDALE BEACH, FL 33009 -·Horton Year: 2016

TIM WILEY ... EMERGENCY VEHICLES Chassis:Model:

Option Std Qty Header!Desc,jption!Data Proposal Total


623

BL32AOOO

le

CA200000 0

CA630000 0

OEM AM/FM/CD PLAYER SHALL BE PROVIDED BY THE OEM MANUFACTUREROEM AM/FM/CD player shall be provided by the OEM manufacturer on all Horton supplied chassis.

CONVERSIONS

PREVIOUS VEHICLE REFERENCEThis option is to be used for comparison purposes only. Specifications are specific to each order so use extreme caution when referencing a previous production order.

PREVIOUS VEHICLE PRODUCTION #15735, PHOTOS AVAILABLE

CONVERSION MODEL: 623 FREIGHTLINERMINIMUM BODY DIMENSIONS:(Exterior)-Height:-Width:-Length: (Interior)-Height:-Aisle

91"96"

173"

72"20"

-Width: 20"(from edge of cot in wall position to squadbench riser)

-Length: 169"OVERALL DIMENSIONS (Including Chassis, Module and Step):-Height: 110" (to top of vent)-Width: 100"-Length: 295"

NOTE: REQUIRES OPTION #CA63B006 IF CHASSIS HAS A VERTICAL EXHAUST.


Tuesday, October 27, 20152:12:27 PM Re,•2

Close of38

HALLANDALE BEACH FIRE RESCUE121 S. W. 3RD STREETHALLANDALE BEACH, FL 33009 -·Horton


TIM WILEY 1111 .EMERGENCY VEHICLES Chassis:Model:

Option Std Qt y Header/Descr i ption/Data Proposal Total


623

CA630001 623 STREETSIDE FORWARD:Clear Door Opening:Actual Compartment

18.7" wide x 80.6" high21.4" wide x 83.6" high x 21.9"

This area shall be accessed through a single outside hinged door.The compartment shall housecompartment shall be vented

the vehicle's primary 02 cylinder. Theto the outside.

!!! FABRICATE AND INSTALL AN ALUMINUM PULL-OUT TOOL BOARD ON THE LEFT COMPARTMENT WALL. TOOL BOARD IS TO BE APPROX 40" HIGH AND FULL DEPTH. INSTALL A GAS SHOCK TO HOLD THE TOOL BOARD IN THE OPEN AND CLOSED POSITIONS.

0cb040000

0dr081000

0tn01aa00

CA630002

! ! ! INSTALL ALL ELECTRICAL EQUIPMENT NORMALLY LOCATED IN THE STREETSIDE INTERMEDIATE COMPARTMENT ON CEILING OF THIS COMPARTMENT. COVER WITH AN EXPANDED METAL CAGE.

' ' ' INSTALL A STREAMLIGHT VULCAN LIGHT AND AND CHARGER IN THE UPPER RIGHT COMPARTMENT WALL. SEE PHOTOS IN FILE.

COMPARTMENT HEIGHT Modify: first, street sideThe height of the standard compartment for this model shall be modified. This is the first street side compartment height modification and shall include affected modifications to the interior cabinet.

HEIGHT MODIFICATION: REDUCE COMPARTMENT HEIGHT 20. 00" DUE TO MAIN WALLA!C UNIT.

SHELF FOR LED LIGHTED VERTICAL COMPARTMENTA diamond plate adjustable shelf shall be installed in the following location.

LOCATE: ABOVE PULL-OUT TOOL BOARD.

OXYGEN BOTTLE, RE-LOCATION OF 02 TANK TRACKThe location of the 02 bottle shall be changed per the information listed below.

LOCATE: UNDER BENCH SEAT PER DRAWING. SEE PHOTOS IN FILE.

623 STREETSIDE INTERMEDIATE:Clear Door Opening: 51.7" wide x 39.8" highActual Dimensions: 55.4" wide x 43.0" high x 21.9"This area shall be accessed through double, outside hinged doors.Both doors shall have exterior door handles and latching devices.111 INSTALL (3) SURVIVAIR 45 MIN. SCBA BRACKETS #UN-6-30-3-SFPHS ON THE BACK COMPARTMENT WALL. INSTALL TOP OF BRACKET 38" ABOVE FLOOR.

!!! INSTALL (3) HELMET HOOKS AND (3) COAT HOOKS. SEE PHOTOS IN FILE FOR EXACT LOCATIONS.


Tuesday, October 27, 20152:12:27 PM

Close of 38



TIM WILEY - .EMERGENCY VEMICLES Chassis:Model:

Option Std Qty Header!Descriqtion!Dat a Proposal Total


623

CA630004

0cb040w00

0cb04a000

0drOBIOOO

CA630005

0 cb060000

0cb060w00

623 STREETSIDE REAR:Clear Door Opening: 32.0" wide x 39.8" highActual Dimensions: 37.4" wide x 43.0" high x 21.9"This area shall be accessed through double, outside hinged doors.Both doors shall have exterior door handles and latching devices:

COMPARTMENT WIDTH Modify: first, street sideThe width of the standard compartment for this model shall be modified. This is the first street side compartment width modification and shall include affected modifications to the interior cabinet.

WIDTH MODIFICATION: INCREASE COMPARTMENT WIDTH APPROX. 7. 20" (MAKE AS WIDE AS POSSIBLE.)

COMPARTMENT HEIGHT MODIFY: second, street sideThe height of the standard compartment for this model shall be modified. This is the second street side compartment height modification. Interior cabinet modifications included in the "COMPARTMENT HEIGHT MODIFY: first, street side" option B04

Height Modification: DECREASE COMPARTMENT HEIGHT APPROX. 20.162".! ! ! COMPARTMENT WILL BE 26.090" HIGH INCLUDING DROP.


LOCATE: CENTER IN COMPARTMENT OPENING.

623 CURBSIDE REAR:Clear Door Opening: 25.0" wide x 80.6" highActual Dimensions: 29.6" wide x 83.6" high x 21.9"This area shall be accessed through a single outside hinged door

! ! ! COMPARTMENT TO BE DIAMOND PLATE ILOS.! ! ! COMPARTMENT TO BE DOUBLE DOOR ILOS.

COMPARTMENT HEIGHT MODIFY: first, curbsideThe height of the standard compartment for this model shall be modified. This is the first curbside compartment height modification and shall include affected modifications of the interior cabinet.

HEIGHT MODIFICATION: DECREASE 20.162" TO TOP OF WHEEL HOUSE

COMPARTMENT WIDTH Modify: first, curbsideThe width of the standard compartment for this model shall be modified. This is the first curbside compartment width modification and shall include affected modifications to the interior cabinet.

WIDTH MODIFICATION: INCREASE COMPARTMENT WIDTH APPROX. 14. 30" (MAKE ASWIDE AS POSSIBLE.)


Tllesday, October 27, 20152:12:29 PM Rev2

Close of 38


TIM WILEY � .EMERGENCY VEHICLES Chassis:Model:

Option Std Qt y He a der/Descript i on/Dat a Proposal Total


623

0dr081000


LOCATE: CENTER IN COMPARTMENT OPENING.

CA630006 623 CURBSIDE FORWARD WITH BATIERY COMPARTMENT:Clear Door Opening: upper 22. l" wide X 68" high

lower 22. l" wide X 12. 6" high

Actual Dimension: upper 27. 2" wide X 68" high X

lower 27. 2" wide X 12. 6" high

28. 5" deepX 21. 9" deep

0cb06aw00

0dr081000

This area shall be accessed through two outside hinged doors and from an opening located on the curb side forward wall. The upper area shall be primarily used for storage of customer furnished jumpkits, the lower area for the storage for two batteries on a roll outtray.

!!! THIS OPTION IS REQUIRED WITH VERTICAL EXHAUST.!!! DO NOT FABRICATE AS A SEPARATE BATTERY COMPARTMENT. MODIFY BATTERYTRAY TO DUPLICATE PREVIOUS VEHICLE.!!! DROP COMPARTMENT DOORS 13. 00" AT THE TOP DUE TO DANHARD HEAT/AC UNIT ABOVE THE RIGHT FRONT CABINET, AND CLEARANCE FOR EXTERIOR 900 SERIES FLASHER.!!! INSTALL THE BATTERIES IN A HORTON FABRICATED SLIDE-OUT BOX WITH ASEALED, REMOVABLE LID. BOX TO VENT THROUGH THE REAR COMPARTMENTWALL USING A GROMMET ASSEMBLY. BATTERY CABLES TO PASS THROUGH THE BOX WITH WEATHERPROOF FITTINGS. MAKE SURE BATTERY BOX SLIDES IN AND OUT WITHOUT TOUCHING COMPARTMENT DOORS. DO NOT USE WING NUTS TO SECURE.!!! COMPARTMENT TO BE ACCESSED THROUGH DOUBLE DOORS.!!! INSTALL BATTERY JUMP STUDS TO SIDE OF BATTERY BOX.!!! THE CURBSIDE FORWARD IS CUSTOM CONFIGURATION. THIS ISSIMILAR TO A MODIFIED 523 STYLE SET UP. THE AREA FORWARD OF THEFRONT WALL CABINET TO BE A FULL HEIGHT COMPARTMENT WITH TWO SHELVES. REARWARD AREA TO BE EXTERIOR ACCESS TO FRONT WALL CABINET WITH THREESHELVES PER DRAWING AND PHOTOS OF PREVIOUS.

COMPARTMENT WIDTH Modify: second, curbsideThe width of the standard compartment for this model shall be modified. This is the second curbside compartment width modification and shall include affected modifications to the interior cabinet.

WIDTH MODIFICATION: INCREASE COMPARTMENT WIDTH APPROX. 15. 90" (MAKEAPPROX. 43" WIDE.)

!!! COMPARTMENT TO HAVE DOUBLE DOORS ILOS.

2 SHELF FOR LED LIGHTED VERTICAL COMPARTMENTA diamond plate adjustable shelf shall be installed in the following location.

LOCATE: REAR PORTION PER DRAWING


Tuesday, October 27, 20152:12:30 PM Rev 2

Close of 38


Selected Feature List 11877121 S. W. 3RD STREETHALLANDALE BEACH, FL 33009 -·Horton Year: 2016

TIM WILEY 11111 .EMEnC:.ENCV VEHICLES Chassis:Model:


623

Option S t d Qty He a d er/Description/Data Proposal Total

CAB93AFO 0

icB

KKK-A-1822F CERTIFICATION LABELThe vehicle shall have weight/payload, electrical load and KKK-A- 1822F certification stickers installed in the 02 compartment.

BODY MODIFICATIONS/OPTIONS

CB030000 0 4 MODULE HEAD ROOM, INCREASE FROM STANDARD (PER INCH)The standard module body headroom shall be increased from standard per the quantity listed below. The quantity represents inches and must be in increments of 2".

HEADROOM REQUIRED: 76"

CB06EOOO 0 SIDE DOOR: relocateThe side patient access door shall be relocated from its standard location.

LOCATE: REARWARD DUE TO CURBSIDE FORWARD COMPARTMENT WIDTH MODIFICATION.

CB06SXOO 0

CB06SX10 0

CB09SAOO

DOUBLE STEP CURBSIDE ENTRY 6" DROP SKIRTThe curbside skirt, forward of the rear wheel well shall be dropped6 inches. Two integral ALD steps within the side patient door stepwell shall be available upon opening the side door for easier and lower access to the patient compartment.

STREETSIDE OF BODY LOWERED 6" FROM STANDARDThe street side of the body forward of the rear wheel well shall be lowered 6" from standard.

PATIENT AREA SOUND PROOFING/ACOUSTIC ENHANCEMENT PACKAGEInstall standard sound control package.


Tuesday, October 27, 20152:12:30 PM Re,,2

Close of38



TIM WILEY Im .EMERGENCVIIEHIClES Chassis:Model:


623

Option

CBR12AOO 0

CBSP0001 0

CBSP0002 0

CBSP0003 0

CBSP0004 0

Std Qty Header/Description/Data Proposal Total

STREET SIDE WHEEL WELL COMPARTMENT W/HINGED DOOR & PULL OUT TRAYA diamond plate compartment shall be constructed above the street side wheelhouse. This compartment shall be accessed through a hinge down door and shall include a slide-out tray with Accuride slides.

1 !! INSTALL A TIP-DOWN DOOR STYLE COMPARTMENT ONLY. DELETE SLIDE-OUT TRAY. APPROX. SIZE: 37.75" W X 20.38" H X 13"D.

!!! USE FDNY STYLE GAS CYLINDERS WITH ONE REVERSED. (ON THECOMPARTMENT DOOR.)

!!! INSTALL (1) ADJUSTABLE SHELF.111 THIS COMPARTMENT DOOR TO ONLY OPEN 90 DEGREES!!! SEE PHOTOS IN FILE.

!!! COMPARTMENT TO INCLUDE LED STRIP LIGHTING.

SPECIAL INSTRUCTION, BODY MODIFICATIONS

!!! INSTALL A HORIZONTAL BACKBOARD COMPARTMENT ON THE STREETSIDE REAR BODY FACE. APPROX. SIZE: 21"H x 20"W x SO"D 87"D. THE OUTBOARD PORTION TO BE 50"D AND EXTEND UP TO THE WHEELWELL COMPARTMENT. THE INBOARD PORTION TO BE 87"0 AND EXTEND BEHIND THE WHEELWELL COMPARTMENT.

!!! BACKBOARDS ARE TO PASS UNDER THE REAR MAIN CABINET AREA, ABOVE THE STREETSIDE REAR COMPARTMENT, AND BEHIND THE STREETSIDE TIP-DOWNDOOR COMPARTMENT. THE 87"D SECTION STARTS 14. 25" FROM THE LEFT SIDE

OF THE COMPARTMENT.111 COMPARTMENT TO BE SWEEP-OUT STYLE. SEE FILE PHOTOS.!!! REAR FACE BACKBOARD COMPARTMENT TO BE FLAT ALUMINUM.


!!! INSTALL A 3" BODY DROP BEHIND THE STREETSIDE AND THE CURBSIDE REAR WHEELS.


!!! REINFORCE PATIENT CEILING AT THE HEAD OF THE BENCH FOR CARGO NET INSTALLATION.


!!! NOTE CUSTOM CURBSIDE BENCH PAN FOR BOTTLE STORAGE. REINFORCE AS NECESSARY.

lo MODULE BODY HARDWARE

Hall-Mark Fire Tuesday, October 27, 2015 CloseMichael Day 2:12:JOPM Rev 2 Page JO of38



TIM WILEY - .EMEnGENCV VEHICLES Chassis:Model:

Option St d Qt y Header/Description/Dat a Proposal Total


623

DG06AOOO

DG06C200 0

DG080000

DG08AOOO

DHOOOOOO

DH03BOOO

DH04BOOO 0

DH04RPOO

WINDOW, CURBSIDE OF BODY ABOVE SQUAD BENCHA fixed window shall be installed on the curbside of the body above the squad bench.

3 PRIVACY WINDOW, SLIDING FOR SIDE ENTRY DOORThe side entry door shall have a sliding window. The window shall have dark privacy glass. The window shall meet FMVSS glazing standards. No films are to be used.

!!! INSTALL IN REAR ENTRY DOORS ALSO.

EMERGENCY DOOR RELEASE MECHANISM, REAR DOORSInstall standard emergency release knobs on top and bottom of rear module entrance doors.

DOOR HANDLESInstall Tri-Mark free floating style door handles with pre-stretched stainless steel cables. Include three piece interior door panels on all access doors.

Vi-Tech body mountsInstall standard Vi-Tech body mounts.

MIRROR STAINLESS STEEL SPLASH SHIELDSInstall #8 mirror stainless splash shields on the lower front face of the body just behind the cab access doors. These splash shields are to be the same height as the diamond plate front corner guards.

!!! PREPUNCH FOR PARl 6 LIGHTS

MODULE BODY FENDERS: rubberRubber extruded fenders shall be installed around the rear wheel well opening.

POLISHED STAINLESS LOWER BODY RUB RAILSPolished stainless lower body rub rails, with #8 mirror finish, are to be along the bottom of the body on each side.

!!! INSTALL ALUMINUM "C" CHANNEL ILOS.!!! INSTALL RED/WHITE DIAMOND GRADE REFLECTIVE TAPE INSIDE "C" CHANNEL.

ALTERNATE 6" WHITE AND 8" WIDE RED SECTIONS.


Tuesday, October 27, 2015 2:12:JOPM

Close of38



TIM WILEY

Option

- .EMERGENCVVEHICL.&S Chassis:Model:

Std Qty Header/Des c ription/Dat a Proposal Total


623

DH330000

DL480000 0

DL48AOOO

DL48BOOO 0

DL48COOO 0

Dl..,48DOOO 0

DLH40000 0

REAR DOOR HOLD OPENS, GRABBERInstall chrome Cast Products "Grabber" style rear door hold opens. (NOTE: HOLD OPENS MUST BE RELOCATED IF TELESCOPIC LIGHTS ARE ORDERED)

ELECTRIC DOOR LOCKS: compartmentInstall power activated door locks on all exterior compartmentdoors. Locks to be activated by a switch at each patient area access door. Locks may be overridden by a door key. A separate lock switchwill be located in the front radio console if option DL48DOOO (wired to OEM locks) is not selected.

ELECTRIC DOOR LOCKS: access doorsInstall power activated door locks on all patient area access doors. Locks to be activated by a switch at each patient area door, and controlled with the access door locks. Locks may be overridden by a manual slide lever or by the door key. A separate lock switch willbe located in the front radio console if option DL48DOOO (wired to OEM locks) is not selected.

ELECTRIC DOOR SWITCH: concealedInstall a concealed switch on the exterior of the vehicle to operate the power door lock circuit. Doors shall be wired to unlock only on this circuit.

LOCATE: UNDER STREETSIDE FORWARD MODULAR BODY CORNER EXTRUSION.

2 ELECTRIC DOOR SWITCH: programmable touch padThe patient area power door locks will include an exterior programmable touch pad system located near the bodyside access door.

LOCATE: (1) STREETSIDE FRONT OF MODULE ABOVE BELT STRIPE.(1) LOWER CURBSIDE REAR MODULE ABOVE RISER.

! ! ! SEE DRAWING AND PHOTOS IN FILE.! ! ! PROGRAM UNLOCK CODE TO 76090.

ELECTRIC DOOR LOCKS WIRED TO OEM SWITCHESThe module door locks and compartment locks (if ordered) are to be wired to the chassis door lock switches.

RECESSED LICENSE PLATE BRACKETA Cast Products #LP0002 recessed license plate bracket shall be installed per the attached drawing. The bracket will include lighting in the top to illuminate the license plate.

LOCATE: CENTERED IN REAR RISER.



Close of38



TIM WILEY - .EMERGENCYVEHtClES Chassis:Model:

Option Std Qty Header!Description(Dat a Proposal Total


623

DM100000

DR22BOOO 0

DR23AOOO

DSP00001 0

DSP00002 0

ED050000 0

REFLECTORS:All patient compartment entry doors shall have red reflectors in the lower corner.

DRI DECK IN EXTERIOR COMPARTMENTSDri Deck will be installed on the floor and shelves of all exterior compartments.

COLOR: RED.

RUBBER COVERED WALLS IN BACKBOARD COMPARTMENTThe interior of the backboard compartment is to be covered with rubber matting to protect equipment stored in this area.

!!! INSTALL GRAY SCORPION SPRAY-ON RUBBER LINER ILOS.NOTE: BACKBOARD COMPARTMENT IS IN THE STREETSIDE REAR MODULE FACE.

SPECIAL INSTRUCTION, MODULE BODY HARDWARE

!! ! ALL INNER PANELS OF THE PATIENT ENTRY DOORS TO HAVE (3) PIECE DOOR PANEL ILOS FOR EASE OF SERVICE.

SPECIAL INSTRUCTION, MODULE BODY HARDWARE

!!! INSTALL GRAY SCORPION SPRAY-ON RUBBER LINER ILOS.NOTE: BACKBOARD COMPARTMENT IS IN THE STREETSIDE REAR MODULE FACE.

PAINT AND STRIPING!!! CHASSIS WILL ARRIVE FROM FREIGHTLINER PAINTED L2187EB LIME GREEN. HORTON WILL NOT PAINT CHASSIS.

MODULE PAINT: other colorPaint MODULE special color

!!! CHASSIS WILL ARRIVE FROM FREIGHTLINER PAINTED L2187EB LIME GREEN. HORTON WILL NOT PAINT CHASSIS. HORTON TO PAINT BODY TO MATCH CHASSIS.!!! PAINT MODULE ROOF WHITE FROM THE TOP EXTRUSIONS INWARD. NO WHITE IS

TO BE VISIBLE FROM GROUND.

Hall-Mark Fire Tuesday, October 27, 2015 CloseMichael Day 2:12:30 PM Re,, 2 of38


TIM WILEY � .EMEnc.eNCV VEHICLES Chassis:Model:

Option Std Qty Header(Descriqtion!Data Proposal Total


623

ED090000 0 STRIPE: customSpecial paint stripe See drawing

TYPE: BLUE SCOTCHLITE.CONFIGURE:

l" BLUE SCOTCHLITE. 1 " PAINT SPACE.6" BLUE SCOTCHLITE.1" PAINT SPACE.1" BLUE SCOTCHLITE.

! ! ! SEE FILE PHOTOS FOR POSITION.! ! ! INSTALL CLEAR EDGE SEAL TO ALL BLUE SCOTCHLITE STRIPES.

ED20PSOO

ED5EOOOO 0

FE010000

FE01FTOO

PAINT PANEL: sampleA painted test panel shall be prepared with the following paintcolor and number, to confirm correct paint selection. The panel willbe mailed as designated.

Color:Paint Number:

DIAMONDGRADE CHEVRONS-AROUND REAR DOORSInstall Diamondgrade chevron striping on the rear of the body around the rear door::;. Install inboard of the corner posts antl l..,elow Lhe upper driprail.

Colors: 6" WHITE/FLUORESCENT YELLOW-GREEN DIAMOND GRADECHEVRONS ON THE REAR FACE SIDE PANELS, AND THE AREA ABOVE REAR ENTRY DOORS. DO NOT INSTALL ON THE REAR ENTRY DOORS.

INTERIOR CABINET DOORS, HANDLES & HARDWARE

FULL HEIGHT PULL HANDLES ON SLIDING PLEXIGLAS DOORSAll sliding cabinet doors to have full length pull handles.

LATCH, HINGED DOOR: Southco flush stainless steel pull styleInstall stainless flush mount Southco pull latches on the hinged interior cabinet doors.



CloseRei• 2 of38


TIM WILEY ..• EMERGENCY \IEHfCLES Chassis:Model:

Option St d Oty Header!Desqjvtion(Dat a Proposal Total

Freightliner Medium, 108"623

FE02AOOO

FE060000

FEOBAOOO 0

GF01ROOO 0

PLEXIGLAS COLOR: light tintAll Plexiglas doors to be light tint.

STAINLESS STEEL COUNTER TOPS (STANDARD)Stainless steel pan formed counter tops shall be installed in the patient area.

STAINLESS STEEL-INHALATION PANEL:The inhalation panel is to be fabricated from stainless steel. All edges are to be filed.

!!! INSTALL A D/A FINISHED CLOSE-OUT TO THE BOTTOM OF THE INHALATION PANEL. INCLUDE HINGED ACCESS DOOR TO THE 02 BY-PASS VALVES.

INTERIOR COLORS, UPHOLSTERY AND SEATING

INTERIOR COLOR SCHEME: CustomInterior colors are as follows:

FLOOR: RISER: WALL: CABINET:UPHOLSTERY:

LONCOIN FLECKSTONE MOONSTONE #157UVSTAINLESS STEEL.WILSONART FASHION GRAY #D381.FASHION GRAY PAINT.FLINT GRAY

GF02MOOO

GF02POOO

INSIDE CABINET FINISH: paintThe interior of all aluminum cabinets shall have a durable paint finish. The painted surface shall be washable and non-absorbent. See the appropriate Interior Color Scheme option for paint color information.

RISERS:The interior of this vehicle is to contain no wood or wood products. The risers are to be made of reinforced structural composite board covered with Formica per the color description. Formica will not installed on the risers if stainless steel riser options are selected.


Tuesday, October 27, 2015 2:12:30PM

CloseRev 2 of 38



TIM WILEY - .EMERGENCVVEHICLES Chassis:Model:

Option St d Qty H e a der!Desqjvtion! D a ta Proposal Total


623

GF030000 0

GF03AOOO 0

GF03COOO 0

GK12DOOO 0

GK150000 5

GSP00001 0

STAINLESS STEEL RISER, cabinet wallInstall stainless steel on cabinet wall riser. If a cabinet riser accent stripe is ordered the stainless steel will stop at the bottom edge of the stripe.

STAINLESS STEEL RISER, bench wallInstall stainless steel on squad bench riser.

STAINLESS STEEL LOWER DOOR PANELSFinish lower section of inside patient compartment doors with stainless steel. If an interior accent stripe is ordered the stainless is to stop at the bottom of the stripe.

!!! ALL INNER PANELS OF THE PATIENT ENTRY DOORS TO HAVE (3) PIECE DOOR PANELS ILOS FOR EASE OF SERVICE. THE UPPER TWO PANELS TO BE FORMICA AND THE LOWER PANEL TO BE STAINLESS STEEL.

EVS CHILD SAFETY SEAT WITH 3-POINT SEATBELTDelete the standard attendant seat cushion. Install a high back bucket seat with built in child seat restraints and 3-point occupant restraint. The seat to be adjustable front to rear.

! ! ! INSTALL ON A NON SWIVEL EVS CBDL SEA,· HASE. HINGE DOWN DOOR TO OPEN TOWARDS SIDE ENTRY DOOR. INSTALL APPROXIMATELY 4 "-5" FROM MAIN CABINET WALL TO MAINTAIN HOPS.

3 SEATBELTS:Install standard 4pt seatbelts per quantity and locations selected.

Locate:

Head of bench Middle of bench Foot of bench

Note: Head of bench requires Option #IG070000 (Squad bench end restraint for use with HOPS)

SPECIAL INSTRUCTION, INTERIOR COLORS & SEATING

!!! ALL INNER PANELS OF THE PATIENT ENTRY DOORS TO HAVE (3) PIECE DOOR PANELS ILOS FOR EASE OF SERVICE. THE UPPER TWO PANELS TO BE FORMICA AND THE LOWER PANEL TO BE STAINLESS STEEL.


Tuesday, October 27, 20/52:12:30 PM Re1•2

Close of 38



TIM WILEY - .EMERGENCY VEHICLES Chassis:Model:

Option St d Qt y Header/Description/Data Proposal Total


623

INTERIOR CABINETRY, STREET SIDE

!!! DELETE LINEN CABINET !!!

HK000300 0

HK001000

HK001800

HK01AOOO

HK01ROOO 0

DUCTED HEAT/AC ABOVE MAIN CABINET WALLThe heat/ac unit will be mounted in the upper forward portion of the main cabinet wall per prints. The blower is to direct air directly into a plenum for equalized pressure exiting from six manually adjustable discharge vents. The plenum will be located between the top of the main wall cabinets and the patient area ceiling.

The following options must be ordered in conjunction with this option;

#CB040000 COMPARTMENT HEIGHT MODIFICATION TO THE STREET SIDE FORWARDCOMPARTMENT. ("H" sixe 02 tanks could present space limitations)

#QH293000 TO ORDER APPROPRIATE HEAT/AC UNIT FOR THIS CONFIGURATION.

HOPS SYSTEM:The unit is to be equipped with the HOPS system.

!!! NOTE THE CPR SEAT AIRBAG WILL BE DELETED.

RADIUS STYLE CABINET TRIMInstall smooth 1.5" radiused trim on all applicable interior cabinets.

STREETSIDE WALL WITHOUT CPR SEATStreet side cabinet wall to be per drawing. All cabinets over 14"H will include (1) standard adjustable shelf.

!!! CUSTOM CABINET WALL PER DRAWING.!!! UPPER REAR MAIN CABINET TO BE 20"DEEP TO ACCOMMODATE THE MK15 UNIT. REMOVING BACK OF CABINET MAY BE NECESSARY.

5 LIFT UP CABINET FRAMES: street-sideFasten the Plexiglas door frame extrusion to a piano hinge secured to the cabinet wall. The complete frame and doors shall hinge openupward providing total access to the cabinet behind. The frame shall be held open with gas charged cylinders and secured in the down position with a sliding dead bolt.

LOCATE: ALL UPPER CABINETS AND THE LOWER REAR MOST CABINET.


Tuesday, October 27, 20152:12:JOPM Rev 2

Close of38




Option St d Qty Header/Description/Data Proposal Total


623

HK11AOOO 0

IA200000

IG10AOOO

IG10QOOO

IG15AOOO

IG15B000

DRUG BOX: enclosedA separate drug storage box shall be fabricated and installed within the cabinet as designated in the cabinet wall diagram

!!! FABRICATE AN ALUMINUM DRUG BOX THAT IS 5" HIGH X 8" WIDE BY 10" DEEP AND INSTALL ON BOTTOM OF SHELF IN THE CABINET BELOW THE MERMAID UNIT. ATTACH TO UNDERSIDE OF SHELF AND INSTALL AS FAR FORWARD AS POSSIBLE.PAINT TO MATCH INTERIOR OF CABINET. INCLUDE A MEDECO LOCK WITH THREE KEYS.!!! DIMENSIONS ARE O. D.

INTERIOR CABINETS AND SQUAD BENCH, CURB SIDE

SQUAD BENCH STORAGE:Storage shall be provided under the bench cushions. The area shall run where possible under the bench. The storage pan shall be fabricated from aluminum and shall be accessed by raising the split cushions.

!!! NARROW THE CENTER SECTION OF THE BENCH BY 4. 5 ". MAKE AS WIDE AS POSSIBLE FRONT TO REAR. ANGLE IN AT THE FRONT AND REAR AREAS PER OVERHEAD DRAWING. INSTALL (1) LIFT UP CUSHION PER DRAWING. THE FRONT AND CUSHION WILL BE FIXED. TRIM AS REQUIRED.

!!! NOTE CUSTOM BENCH PAN IS DEEPER THAN STANDARD TO ALLOW FOR "M" TANK STORAGE INSIDE.

!!! DUPLICATE OF PREVIOUS VEHICLE.

BENCH HOLD OPENS: gasInstall gas spring hold opens on squad bench lid.

BENCH HOLD-DOWN: paddle latches (Pair)Install recessed paddle latches into the squad bench riser to retain the squad bench lids in the closed position. The latches shall be both passive and positive.

!!! INSTALL ONE ONLY PER DRAWING.

BENCH CUSHION EDGE TRIM:Trim bench cushion edge with protective aluminum trim, to protect horizontal edge of squad bench cushion from tears..

BENCH BACK C USHION: full sizeDelete individual squad bench back cushions. Install full size cushion.


Tuesday, October 27, 20152:12:JOPM Rev2

Close of38



TIM WILEY - .EMERGENCY VEHICLE& Chassis:Model:

Option Std Qty Header/Descr i p tion/Dat a Proposal Total


623

IK18AAOO

ISP00001 0

ISP00002 0

ISP00003 0

JAK03000

CURBSIDE OVERHEAD CABINET: hinged doorsStorage shall be provided above the squad bench. The storage shall run the full length of the squad bench and shall be accessed through hinged Plexiglas doors that are held in the open position with gas activated rods. The entire cabinet shall be fabricated fromaluminum. The cabinet is to be 9" H to meet current K requirements.

!!! CABINET TO BE 11.00"H ILO 9.00"H.!!! INCLUDE A FIXED CENTER DIVIDER.

SPECIAL INSTRUCTION, CURBSIDE CABINETRY

!!! INSTALL A REMOVABLE STYLE CARGO NET AT THE HEAD OF THE BENCH. USE ANKRA STYLE FASTENERS. CEILING REINFORCED PER CBSP0003.


!!! INSTALL THE 02 CYLINDER UNDER BRACKET THE BENCH SEAT. INCLUDE A PERKO STYLE VENT ABOVE THE WHEELWELL FOR EXTERIOR VENTING. INSTALL AN 02 ACCESS OPENING IN THE BENCH RISER FACE TO ALLOW ACCESS TO THE BOTTLE SHUT OFF VALVE WITHOUT RAISING THE BENCH SEAT. DO NOT INSTALL A PLEXIGLAS ACCESS DOOR.!!! SEE FILE PHOTOS OF 14848.


LOCATE: A PULL-OUT DRAWER AT THE HEAD OF BENCH FACING AISLE. USE SIDE MOUNT DRAWER SLIDES. DRAWER TO BE FLANGELESS.

!!! INSTALL A FIXED DIVIDER FROM SIDE-TO-SIDE APPROX. 2/3 DEEP INTO THE DRAWER. INSTALL (2) FIXED DIVIDERS SPACED EVENLY FROM THE DRAWER FACE TO THE SIDE-TO-SIDE DIVIDER.

!!! SEE FILE PHOTOS.

INTERIOR CABINET S FRONT,

FRONT WALL CABINET:The front wall cabinet shall be arranged per drawing. Additional configuration information may follow.

CABINET WALL FINISH: PAINT.

Hall-Mark Fire Tuesday, October 27, 2015 Close

Michael Day

2:12:JOPM Rea• 2 of38

HALLANDALE BEACH FIRE RESCUE121 S.W. 3RDSTREETHALLANDALE BEACH, FL 33009 -·Horton




623

Option Std Qty Header!Des.cription!Data Proposal Total

JE040000 4

JK140000 0

JSP00001 0

FRONT WALL DOORS: PlexiglasFront cabinet wall to have hinged Plexiglas doors, and latch type as designated.

TYPE: FULL HEIGHT LEXAN DOOR. USE O. 50" LEXAN ILOS.LATCH STYLE: LOCKING LEVER LATCH.

! ! ! INSTALL CONTINUOUS PIANO STYLE HINGE ON THE RIGHT SIDE. INSTALL AN ALUMINUM ANGLE ALONG THE RIGHT EDGE OF THE LEXAN FOR ADDED STRENGTH.

CROSSOVER CABINETAn aluminum crossover cabinet is to be installed above the walkthrough/passthrough and is to include a solid hinged door.

!!! INSTALL THE INTELLIPLEX ELECTRONICS IN THIS CABINET.!!! INSTALL GAS SHOCK HOLD OPEN ON DOOR.

SPECIAL INSTRUCTION, FRONT WALL CABINET

111

111

FABRICATE AND INSTALL A CUSTOM CABINET WITH (3) EQUAL SIZED ANGLED DROP-IN STYLE MAP SLOTS. APPROX. SIZE: 40"H x 15"W x 5"D. LOCATE ON THE WALK-THROUGH SIDE OF FRONT WALL CABINET.SEE 15283 photos.

MODULE INTERIOR ACCESSORIES AND TRIM )

KG02AOOO O 4 I.V. HOOKS: PerkoInstall Perko I.V. hook where indicated.

Locate: SHIP LOOSE

KG02BOOO 2 2 IV HANGER, CAST PRODUCTS WITH RUBBER ARMCast products recessed IV hangers with rubber arms for attaching solution bags shall be installed in the designated locations.

LOCATE: PER OVERHEAD DRAWING

KG09BOOO CEILING GRAB RAIL: standard (2) 2ft rails or (1) 6ft rail anti-microbialCabinet wall "A" will have (1) 6' rail over cot as standard.Cabinet wall "B" will have (2) 2' rails, 1-forward and 1-to rear ofCPR seat.

LOCATE: (1) 6 FT. RAIL FOR CABINET WALL "A".

Hall-Mark Fire Tuesday, October 27, 2015 CloseMichael Day 2:12:30 PM Rei• 2 of38



TIM WILEY

Option

KG09D000 O

KG09KOOO

KG110000

KG120000

KG16BOOO

KG17AOOO 2

KSP00001 0

- .EMERGENCVYEHICLES Chassis:Model:

St d Qty H e a der/Description/ D a ta Proposal Total

GRAB RAIL: additional 6ft with anti-microbial coatingAdditional (6)ft long ceiling mounted stainless steel grab rail with anti-microbial coating.

LOCATE: OVER AISLE EDGE OF BENCH CUSHION.

PATIENT DOOR GRAB RAILS: angled with anti-microbial coatingAll patient access doors to have heavy duty angled stainless steel grab rails with smooth radius corners and flange mounting and anti microbial coating.

FLOOR TRIMTrim floor with cove molding at non rolled areas of floor.

CABINET TRIMTrim all vertical and horizontal edges.

CEILING MATERIAL, PLATINUM WHITE ALUMINUM COMPOSITEThe standard module ceiling material shall hP platinum white aluminum composite.

2 FIRE EXTINGUISHERS: 51b ABCSupply five pound fire ABC extinguisher(s). Ship loose, or identify mounting location(s).

LOCATE: SHIP LOOSE

SPECIAL INSTRUCTION, INTERIOR ACCESSORIES & TRIM

!! ! INSTALL (3) FOAM COVERED STEEL GRAB HANDLES AS FOLLQlvS:(1) ON EACH WALL INSIDE THE REAR DOORS FOR ENTRY ASSIST.(1) AT THE FORWARD END OF THE BENCH WALL INSIDE THE SIDE ACCESS

DOOR FOR ENTRY ASSIST.

!!! ORDER PART# 9/01228 FROM ALLEGIS CORP.


623

I L COT MOUNTS AND ACCESSORIES

Hall-Mark Fire Tuesday, October 27, 2015Michael Day 2:12:30 PM

CloseRev 2 of38

HALLANDALE BEACH FIRE RESCUE Selected Feature List 11877121 S.W. 3RD STREETHALLANDALE BEACH, FL 33009 -·Horton Year: 2016

TIM WILEY - .'EMEJ1G'ENCVVEHICLE5 Chassis:Model:

Option Std Qt y Header!De s crivtion! D at a Proposal Total


623

LG03F300 0

MAM148FO

0mam15y00

0mam20a00

MAM148RO

0mam15r8c

COT MOUNT, INSTALL Power LoadSupply and install a Stryker Power load system.

Note: This option complies with GSA change notice 8.

!!! Requires selection of option #CB07EOOO

!! 1 Compatible with standard rear step/bumper with 7" flip-up center section only.

LIGHTBARS FRONT AND REAR

1 FRONT LIGHTBARS FOR 96" BODIES

LIGHT BAR: custom frontInstall special front light bar.

MODEL: WHELEN 72" FREEDOM BAR. ALL 400 SERIES LINEAR SUPER LEDS. CONFIGURE:{SIDE RLED]{CORNER RLED]{RLED]{RLED]{RLED]{RLED]{WLED]{WLED]{RLED]{RLED]{RLED}[RLED}{CORNEH HLtU}{SIDE RLED}

LENS COLOR: CLEAR.

LIGHT BAR MOUNT: cab roofMount light bar on cab roof.

MODEL: SELECTED ABOVE.

1 REAR LIGHTBARS FOR 96" BODIES

LIGHTBAR REAR, 4500 CUSTOM 88"Configure:

MODEL: WHELEN 4500, 88" CUSTOM REAR LIGHTBAR. ALL 400 SERIES LINEAR SUPER LEDS

CONFIGURE:R/R/LRll/R/R/A/A/R/R/LRll/R/R

LENS COLOR: CLEAR.



Close of38


Selected Feature List 11877121 S.W. 3RD STREETHALLANDALE BEACH, FL 33009 -·Horton Year: 2016

TIM WILEY 111111 .U.IE.RGENCV VEHICLES Chassis:Model:


623

Option0

St d Qty He a d er/Description/ D a ta LIGHT BAR MOUNT: rear face of body

Proposal Total

mbm20c00

I MM

Mount selected light bar to rear face of module body. Vertical surface mount bars, are mounted flush to face.Traditional light bars mount to Cast product brackets on the face of the module body.

MODEL: SELECTED ABOVE.

ELECTRICAL EMERGENCY VISUAL WARNING SYSTEMS

MM01AOOO 0 WIG WAG HEADLIGHTS:Install wig wag headlight flasher.

MM030000 1 WHELEN M SERIES LIGHTING OPTIONS:

0 8 M7 SERIES LED, REDmmO?rOOO Whelen M7 series L.E.D. lights shall be installed in the designated

locations.

Location: (4)GRILLE LIGHTS INTERSECTION LIGHTSWHEEL WELL LIGHTSLens color: CLEAR

0 2 M9 SERIES LED, AMBERmm09a000 Whelen M9 series L.E.D. lights shall be installed in the designated

locations.

Location:Location: REAR FACE, UPPER WINDOW LEVELLens color: CLEAR

0 8 M9 SERIES LED, REDmm09r000 Whelen M9 series L.E.D. lights shall be installed in the designated

locations.

Location: (2) FRONT FACE OF BODY.(2) CURBSIDE.(2) STREETSIDE.(2) REAR FACE OF BODY, LOWER WINDOW LEVEL.Lens color: CLEAR



CloseRel' 2 of38



Option S t d Qtv Header(Description!Data Proposal Total


623

MM10LOOO 0

MM700000 O

MM7AOOOO 0

I MN

MN09NOOO

MN35B000 0

MN35ZOOO 0

3 L.E.D. WARNING: patient entry door, single color (EACH)Install custom made L.E.D. light strips on the interior patiententry door panels. The light strips shall have a integral lens strip for maximum light disbursement. Installation will be flush with theinner door panel. The light strip shall flash when the door is open, and the red flashing light circuit is activated.

Locate: UPPER PORTION OF ALL PATIENT ENTRY DOORSColor: RED

FLASHING SEQUENCE FOR LED LIGHTINGSpecify flash pattern programming for selected or all applicable warning lights:

1 1 1 FLASH PATTERN TO BE FAST RANDOM PATTERN SET AT LIGHTHEAD.

M SERIES CONTROL WIREInstall a control wire to change flash patterns on M series lights as noted below.

Lights:

AUDIBLE EMERGENCY WARNING SYSTEMS

AIR HORN: mediu m duty chassisThe chassis shall have air horns installed from the chassis manufacturer. The air horns shall use the chassis air system. The air horns can only be activated when the vehicle is in gear.

TRUMPET LOCATE: EACH SIDE OF ENGINE COWLING.ACTIVATION: DRIVER AND PASSENGER SIDE FOOT SWITCHES.CONFIGURE: IGNITION SWITCH HOT.

SIREN: 295SLSC1Specified siren to be:WHELEN WS295SLSC1

SIREN: customSpecified siren to be:

Make: FEDERAL SIGNALModel: RUMBLER

INCLUDE A LABELED BUTTON IN CENTER OF CONSOLE FOR ACTIVATION.


Tuesday, October 27, 20152:12:33 PM Rev

2

Close of38


TIM WILEY ...EMERGENCY VEHICLES Chassis:Model:

Option Std Qty Hea<fer!Description(Dat a Proposal Total


623

MN40AOOO

MN45FLOO

MN50AOOO

lo

OL09MOOO 0

OL34LOOO

OL350000 0

2 SIREN INSTALL:The siren listed above shall be supplied and mounted as defined.SIREN MODEL: SELECTED ABOVE.

SPEAKERS: C.P. FrelghtlinerCast Products speakers #SA3805 to be mounted in front bumper.!!! SPEAKERS TO BE #SA3805.

SPEAKER INSTALL: bumperSpeaker Selections (Bumper Installed)

LIGHTS

KKK SIDE BODY MARKER LIGHTS, M6 SERIES L.E.D. (PAIR)Install red Whelen L.E.D. M6 series turn/marker lights on each rear side of the module body. Lights provide module body night time side lighting vi::;ibility and turning signal irnll<..:ation.!!! LIGHTS TO FLASH WITH EMERGENCY WARNING LIGHTS IATS.!!! TURN SIGNALS TO OVER RIDE EMERGENCY LIGHTS.

LED EXTERIOR COMPARTMENT LIGHTINGAll exterior compartments will be lighted with LED strip lighting. A vertical strip will be installed inside both sides of each compartmen�. The lights shall be directed toward the back of the compartment.111 TO INCLUDE WHEELWELL COMPARTMENT PER CBR12A00.

ICC MARKER LIGHTSLED ICC marker lights shall be installed.

OL35AOOO O 4 ICC MARKER LIGHT, ADDITIONALAdditional ICC marker lights shall be installed in the designated locations.LOCATE: UPPER CORNERS OF BODY SIDES. RED UPPER REAR CORNERS. AMBER

UPPER FRONT CORNERS.



Close Page25 of38



TIM WILEY - .EMERGENCY\iEHICLES Chassis:Model:

Option St d Qt y H e a de,tDescrivtion( D a ta Proposal Total


623

OL35DOOO

OL41BOOO 0

OM25CWO 0

OM25LOOO 0

OM30DOOO 0

OM30FBOO 0

ICC MARKER LIGHTSInstall standard rolled marker lights along the upper corner post front and rear.Note: Do not install if lightbar(s) already includes standard marker lights.

RUNNING BOARD LIGHTS, WHELEN PAR 16 L.E.D.Clear Whelen Par 16 round L.E.D. lights mounted in chrome flanges shall be installed in the front of the module body

Locate in the stainless steel stoneguard above the running boards.The lights shall be wired to the

chassis door switch and illuminate the step/running board.! ! ! NOTE: LIGHT MAY BE BLOCKED BY VERTICAL EXHAUST.

4 M9 SERIES LED SCENE LIGHTInstall Whelen M9 series LED side scene lights.Locate: (2) PER SIDE PER DRAWING.

LED DOCKING LIGHTS, LOWER REAR SIDES OF BODYStainless steel LED backup lights with rear 13 degree angle are to be installed in the lower rear sides of body. These lights are to activate any time the vehicle is placed in rever�e.Manufacturer #E960

TAIL LIGHTS, M6 SERIESWhelen M6 series brake/tail, amber arrow turn and backup lights to be installed in the selected location.LOCATE: TURN SIGNALS CENTERED ABOVE STOP/TAIL AND BACK UP LIGHTS IN

REAR RISER.TAIL/STOPS ON OUTER EDGE OF RISER.BACK-UPS DIRECTLY INBOARD OF TAIL/STOPS.

! ! ! PROGRAM BRAKE LIGHTS FOR SIGNAL ALERT.!!! PROGRAM TURNS FOR SEQUENCE 60 ARROW FLASH.

4 AMBER ARROW LIGHTS, M6 SERIES LED'sWhelen amber arrow M6 series led lights shall be installed in the designated location.LOCATE: (2) FRONT BODY FACE JUST BELOW 900 SERIES FLASHERS. ALIGN THE

OUTBOARD EDGE OF THE TURN ARROWS WITH THE OUTBOARD EDGE OF THE 900 SERIES FLASHERS.

(2) INSTALL FORWARD OF REAR WHEELS AT SAME LEVEL AS THEINTERSECTION LIGHTS.

!! ! PROGRAM ALL FOR SEQUENCE 60 ARROW FLASH.


Tuesday, October 27, 20152:12:33 l'M Re1,2

Close of 38


Selected Feature List 11877121S.W. 3RDSTREETHALLANDALE BEACH, FL 33009 -·Horton Year: 2016

TIM WILEY - .EMERGENCY VEHICL.ES Chassis:Model:


623

Option Std Qty Header!Description!Data

ELECTRICAL POWER GROUP

Proposal Total

PAL00003 0

PALOOAOO 0

PAL01B00

PAL04DOO

PAL30AOO 2

INTELLIPLEX MULTIPLEX ELECTRICAL SYSTEM:Install the Intelliplex Multiplex electrical system.

MODULE DISCONNECT DEFAULTThe module disconnect circuit shall default to the "on" position when the battery switch is activated.

BATIERY SWITCH: std. operationThe "Master" battery switch shall switch battery power "on" and "off" to the ambulance body and conversion added electrical circuits only. All OEM chassis electric's, (headlights, ignition, keep alive) shall remain wired "hot" and have no ability to be switched "off", and provide circuit function as provided by the chassis manufacturer.

NOTE: DO NOT MODIFY OEM BATTERY SWITCH UNLESS STATED BELOW.

LOCATE: ON FLOOR LEFT OF DRIVER SEAT.

CHARGER/POWER SUPPLY: 45 AMPInstall a 45 amp battery conditioner in the designated electrical equipment area. Conditioner to be wired to the batteries through the standard shoreline inlet.

2 110V INTERIOR OUTLETTwo 110V interior outlets are provided as standard on all models. The standard locations are in the inhalation area and the wall over the squad bench. List the standard outlet locations and any deviation from the standard, plus any additional outlet locations below:

LOCATE: (1) 15A DUPLEX, FORWARD END OF INHALATION AREA.(1) 15A DUPLEX, UPPER LEFT CORNER OF THE FRONT WALL CABINET.

PAL31COO 3 3 INTERIOR 12VDC OUTLETS: cigarette lighter type12 volt outlets to use cigarette lighter style connectors.

LOCATE: (2) FORWARD INHALATION AREA.(1) FRONT WALL CABINET BESIDE 110V OUTLET.

CONFIGURE: BATTERY HOT.



Close of38


TIM WILEY Im .EMERGENCY VEHICLES Chassis:Model:


Option Std Qty Header!Description!Data Proposal Total

PAL38EOO O 2 SHORELINE, KUSSMAUL SUPER AUTO EJECT, 20 AMP NON ARCINGInstall a 20 amp Kussmaul non-arcing auto ejection shoreline receptacle.

! ! ! INSTALL (2) HUBBEL 20A NON-EJECT RECEPTACLES ILOS.

LOCATE: STREETSIDE REAR BODY PANEL, LOWER LEFT CORNER ABOVE RISER. CONFIGURE: OUTBOARD SHORELINE FOR BATTERY CHARGER & INTERIOR OUTLETS.

INBOARD SHORELINE FOR 120V AC UNIT.!!! LABEL BOTH SHORELINES.!!! DUPLICATE OF VEHICLE #15283.

PAL40000

PL10AOOO

PL11AOOO 0

PL11BOOO 0

PL11COOO 0

PL11FOOO

EXTRA 12VOC CIRCUIT BREAKER:An extra circuit breaker shall be installed.

SWITCH PANEL MOUNT:Switch panel to be flush mounted in upper face of console.

LIGHT PROGRAMMING: side rear sceneThe side rear scene lights shall be wired to transmission reverse, plus standard mode of operation.

LIGHT PROGRAMMING: right side sceneThe right side scene lights shall come "on" when the side patient door is opened.

LIGHT PROGRAMMING: load lightThe rear load lights shall be wired to transmission reverse, plus the standard mode of operation.

PROGRAMMING: AUDIBLE LOW VOLTAGE ALARMProgram an audible alarm to activate if the voltage drops below 11.8 volts for 120 seconds.



CloseRev 2 of38




Option St d Qty Header/Description/Data Proposal Total


623

PL11GOOO

PL190000 0

PL19AOOO

PL220000 0

PL22COOO

PL24BOOO 0

PL24TOOO 0

LIGHT PROGRAMMING: park brakeA warning shall display on the front console readout, advising to set the Parking Brake, should the modular disconnect switch be "ON" and the transmission placed in "PARK" or "NEUTRAL". It will also advise to Disengage the Parking Brake should the vehicle be placed into gear.CONFIGURE: ALARM TO ACTIVATE WITH RED FLASHER CIRCUIT.

REPORT LIGHT:A �eport light shall be located at the action wall to light the counter area! ! 1 ILOS REPORT LIGHT SUPPLY AND INSTALL A TECNIQ 12. 6" LED LINEAR AREA LAMP.

REPORT LIGHTInstall a 12" Tecniq LED bar style report light.

STEP WELL LIGHT:Install one step well light in the standard location on the bench side of the step well. Light to activate with door open.!!! LIGHT TO BE A 4" FEDERAL LED #607141-05 LIGHT ILOS.

STEP WELL LIGHT:Install a 10.5" LED Vista light strip in the standard location on the bench side of the step well. Light to activate with door open.

3 FLUORESCENT LIGHTS:Install 24 inch 12 volt fluorescent ceiling light fixtures. Wire to charger/conditioner in addition to standard mode of operation.LOCATE: PATIENT CEILING, SPACE EVENLY.

LAMP TIMER: programmableInstall an electronic momentary touch timer switch where specified. The switch will enable time limited operation of the below listed lights, with the battery switch in the off position.LOCATE: HEAD OF BENCH.LIGHT(S) CONTROLLED: FLUORESCENTS. SET ELAPSED TIME FOR: 15 MINUTES.


Tuesday, October 27,20/52:12:33 PM Re1>2

Close Page29of38



TIM WILEY - •EMERGENCY VEHICLES Chassis:Model:

Option Std Qty Header!Description!Dat a Proposal Total


623

PL26AOOO 0

PL27COOO 7

PL280000

PL29DOOO 0

PM110000 0

PSP00002 0

CLIMATE CONTROLLED DRUG CABINET: MK15Install an MK15 1.5 cu. ft. climate controlled drug cabinet in the location noted below. Wire to the 12 system. Standard configuration includes door hinged on top and a rear mounted compressor. Unit dimensions are 12" high x 17.5" deep x 25.75" wide.

LOCATE: UPPER REAR STREETSIDE MAIN CABINET WALL. INSTALL MEDCO STYLE LOCK ILOS. ORDER WITH REAR COMPRESSOR.

! ! ! SEE FILE PHOTOS OF EXISTING UNIT.

7 PATIENT CEILING DOME LIGHTS: WELDONRear patient compartment lights to be Weldon halogen lamps and to be operated by individual cot and bench switches. Lamps to be infinitely adjustable and come on with the doors open.

LOCATE: STANDARD (7) DOME LAYOUT.PROGRAM THE DOME LIGHTS TO DEFAULT TO HIGHEST INTENSITY WHENMODULE DISCONNECT IS ACTIVATED.

GOOSE NECK PANEL LIGHTInstall a flexible goose neck panel light in the following area.

TYPE: INSTALL FEDERAL LITTLITE #LF12ES-LED ILOS. LOCATE: PASSENGER SIDE OF CONSOLE.

2 FLASHLIGHT, STREAMLIGHT SL20 WITH CHARGERHorton is to supply and install Streamlight SL20 flashlight{s) with 12 v charger{s) in the quantity and location{s) noted below.

MODEL: STREAMLIGHT ORANGE VULCAN LIGHTS #44401 ILOS.LOCATE: (1) COMPARTMENT #1, RIGHT WALL ABOVE SHELF.

(1) MAIN CABINET WALL REAR OF ATTENDANT SEAT.! '! SEE FILE PHOTOS FOR EXACT LOCATION.

LIGHT PROGRAMMING: brake lightLower red flashing lights to operate as brake lights when not in the warning mode.

CONFIGURE: FLASHERS TO OVERRIDE BRAKE LIGHT FEATURE. NOTE: ACTIVATE REGARDLESS OF MODULE DISCONNECT STATUS.

SPECIAL INSTRUCTION, ELECTRICAL POWER, PROGRAMMING

! ! ! HIGH IDLE TO ONLY ACTIVATE WITH LOAD MANAGEMENT. INSTALL MANUAL HIGH IDLE SWITCH IN CONSOLE.



Close of38



TIM WILEY � .EMEnGENCY\IEHICLES Chassis:Model:

Option Std Qt y Header/Des c ription/D a ta Proposal Total


623

PSP00003 0

la

QH280000 0

QH293000 0

QH29L500 0

QH300000

0

SPECIAL INSTRUCTION, ELECTRICAL POWER, PROGRAMMING

! ! 1 INSTALL AN OPTICOM PRE-WIRE THAT HAS A 12V CONSTANT POWER SOURCE. PROGRAM SO THAT IT COMES ON WHEN FRONT LIGHTBAR IS ACTIVATED AND PARK BRAKE IS OFF. POWER OFF WHEN PARK BRAKE IS APPLIED. WIRE FROM UPPER STREETSIDE FORWARD COMPARTMENT TO CAB CONSOLE, CENTER PORTION.!! ! DUPLICATE OF #15283.

HEATING, AIR CONDITIONING AND INTERIOR ENVIRONMENT

BRUSHLESS MOTORThe vehicle heat/ac unit selected below is to include a brushless motor ILOS.

HEAT/AC UNIT FOR DUCTED SYSTEM ABOVE MAIN CABINET WALLThe heat/AC unit shall be located above the forward end of the main cabinet wall and is to be ducted over top of the streetside cabinet wall. Unit to utilize (1) #10009296 3-ply filter.

HEAT/AC FREIGHTLINER, DUAL COMPRESSOR, TOP MOUNT AUX CONDENSORInstall a ProAir 12V heat/AC system below the attendant seat. Unit is to include a replaceable filter at the air intake point. A dual compressor system shall be installed with an auxiliary AC condenser mounted on the front face of body.

NOTE: COMPRESSOR TO BE ORDERED WITH THE CHASSIS.

!!! PAINT CONDENSER TO MATCH BODY COLOR.

ULTRAVIOLET LAMP IN A/C SYSTEM DUCTInstall an ultraviolet light in the A/C air duct.

NOTE: IF THE UNIT IS INSTALLED IN A LOCATION OTHER THAN STANDARD, THEN THIS OPTION MUST BE INSTALLED IN THE A/C BOX.

QH310000 0 2 3-PLY PANEL INTAKE FILTERInstall a 3-Ply Panel air intake filter ILOS. (1) 16.75" x 8.75"#10008973 for attendant seat base or above right front cabinet.(2) 13" x 18" #10009296 over #1 compartment or in bottom of linen cabinet. Filters will be behind stainless steel intake grills.

!!! ILOS INSTALL FRAMING AND CUSTOM FILTERS FOR THE HEAT/AC IN TOP OFLINEN CABINET AND THE DANHARD UNIT OVER THE FRONT WALL CABINET. SHIPLOOSE (3) ADDITIONAL FILTERS FOR EACH UNIT.



Close Page31 of38



TIM WILEY - ·E�EnGENCVVEHIClES Chassis:Model:

Option Std Qt y Header/Description/Data Proposal Total


623

QL43NOOO

QL455000 0

RJ01AOOO

RJ01B000 0

RJ040000

RJ05B000

NFPA COMPLIANT VENTING-CAST VENTSInstall an NFPA style venting system to include a 400cfm exhaust vent along with a static vent. Install 9.5" square polished covers on both vents per drawings.

DANHARD 110V A/C SYSTEMInstall a Danhard 50-2000 110V heat/AC unit as noted below.

!!! ABOVE FRONT WALL CABINET ALONG WITH ALL COMPONENTS. MODIFY CABINET AS REQUIRED TO ACCOMMODATE.!!! SUPPLY AND INSTALL FRAME AND REMOVEABLE FILTERS FOR SYSTEM. SHIP! 1 ! WIRE TO INBOARD SHORELINE ABOVE REAR RISER.

CAB CONSOLE AND COMMUNICATIONS

ANTENNA COAX 1 :An RG 58U coax shall be installed so that the ambulance conversion need not be disassembled.

EXTERIOR TERMINATION: COIL UNDER CAB HEADLINER INTERIOR TERMINATION: CONSOLE

ANTENNA COAX 2:Install additional antenna coax and accesses.

EXTERIOR TERMINATION: COIL UNDER CAB HEADLINER INTERIOR TERMINATION: BEHIND INHALATION PANEL.

RADIO CABLE PULL WIREA standard pull wire for radio installation shall be installed from behind the driver's seat to behind the inhalation panel.

FRONT CONSOLE:A console shall be fabricated to coordinate with the interior cab color. Room shall be provided on the face of the console for installation of radio and siren controls.

1 !! INSTALL A CUSTOM CONSOLE PER DRAWING.

!!! INSTALL A 5" BLANK PANEL JUST FORWARD OF GLOVE HOLDERS AND REINFORCE SAME AREA FOR CUSTOMER TO INSTALL COMPUTER EQUIPMENT AT A LATER DATE.

!!! INSTALL LA


Tuesday, October27, 20/52:12:33 PM Rev 2

Close Page32 of38



TIM WILEY ml .EMERGE�CVVEHICLES Chassis:Model:

Option Std Qty Header/Description/Data Proposal Total


623

RJOSCOOO 0

RJ06AOOO 0

RJ06B000 0

RJ080000

CONSOLE EXTENSION:A box for mounting radio heads and storage maps, books, or binders will be attached to the standard engine cover console. Standard box includes (3) 2.5 storage sections, and 8.5 faceplate for radio mounting.

!!! INSTALL A CUSTOM EXTENSION PER DRAWING. INSTALL A 10. 0 "W SECTION WITH (2) EVENLY SPACED DIVIDERS TO ALLOW FOR STORAGE OF (3) GLOVE BOXES. INCLUDE A LIFT-UP PLEXIGLAS LID WITH OVAL HOLES FOR GLOVE ACCESS. INSTALL (3) MAP BOOK SLOTS AT THE REAR. INSTALL LABELS FORWARD OF THE GLOVE BOX HOLDERS TO READ: 'S' 'M' 'L'

!!! PAINT CONSOLE TO MATCH INTERIOR. DO NOT USE CARPET.

! 1 ! REFERENCE#14848 FOR GENERAL DIMENSIONS. DO NOT INSTALL CUP HOLDERS.

RADIO HEAD PRE-CUT: frontCut out control console for radio head(s).

MODEL#: INSTALL DEALER SUPPLIED MOTOROLA XTL 5000.

RADIO HEAD PRE-CUT: rearCut out rear action panel for radio head(s).

INSTALL DEALER SUPPLIED MOTOROLA XTL1500 RADIO!!! RADIO IN SPEC OFFICE ON 7-8-13.

4 RADIO POWER/GROUND:Install 6 gauge cable to positive and ground studs for radio power.

LOCATE: (1) 40A - BULKHEAD BEHIND DRIVER SEAT.CONFIGURE: BATTERY SWITCHED.

LOCATE: (1) 1OA - BULKHEAD BEHIND DRIVER SEAT.CONFIGURE: BATTERY HOT.

LOCATE: (1) 40A - BEHIND INHALATION PANEL.CONFIGURE: BATTERY SWITCHED.

LOCATE: (1) 10A - BEHIND INHALATION PANEL.CONFIGURE: BATTERY HOT.

TERMINATE ALL POWER AND GROUND WIRES USING RADIO STUDS PER STANDARD.


Tuesday, October 27, 20152:12:33 PM Rel' 2

Close Page33 of38



TIM WILEY mi .EMERGENCY VEHICLES Chassis:Mo,lel:


623

Option Std Qty Header!Descrivtion(Data Proposal Total

RSP00001

0

SPECIAL INSTRUCTION, CAB CONSOLE & COMMUNICATIONS

SUPPLY AND INSTALL THE FOLLOWING INTERCOM SYSTEM:

SETCOM MODEL 900 EMS CONFIGURATION WITH INTERFACE FOR MOTOROLA SPECTRA RADIO. SYSTEM TO BE FULLY FUNCTIONAL PRIOR TO LEAVING HORTON.RIM-900 INTERCOM/MIXER - (1) EACH.RC-15MU4 MIC ADAPTER CABLE.BB-900 HEADSET - (2) EACH.5B-EMS901-3 HEADSET, INTERCOM W/POPO SW - (2) EACH.JS-900-30 DUAL JUMPSEAT STATION.ES-900-20-EXTENSION STATION (RADIO PTT).

SUPPLY AND INSTALL (4) FIRECOM HGl HANGERS

(1) DRIVER.(1) PASSENGER.(1) WALL FORWARD OF ACTION AREA.(1) CURBSIDE FORWARD OF CABINET.

Ir

TN01MWOO 1

TN020000

0

!!! SEE FILE PHOTOS OF EXISTING VEHICLE.!!! QUOTE IN ELECTRONIC FILE.

OXYGEN AND SUCTION

OXYGEN BOTTLE, CYLINDER BRACKET: ZicoZico QRM-V oxygen bracket shall be installed.

LOCATE: UNDER SQUAD BENCH.TANK SIZE: SET UP TO ACCOMMODATE AN "M" TANK

OXYGEN ACCESS:A clear Plexiglas door shall be provided in the patient area wall for access to the oxygen cylinder valve. The door shall be hinged so that it swings into the oxygen cylinder storage compartment. The opening shall be trimmed with anodized aluminum edging. O.D. dimension of the access is 7" wide x 11" high.

LOCATE: FORWARD BENCH RISER FACING AISLE, NO DOOR.!!! SEE FILE PHOTOS.

TN030000 2 2 OXYGEN OUTLETS, STANDARDTwo oxygen outlets to be provided as standard and located in the inhalation panel unless relocated per option TN03RLOO.


Tuesday, October 27, 2015

2:12:33 PM

CloseRei, 2 of38




Option St d Qt v Heatfer!Description!Dat a Proposal Total


623

TN03AOOO 0

TN04AOOO

TNOSOOOO

TN060000

TNOBBOOO 0

TN100000

TN11BOOO

TN12DOOO

TSP00001 0

OXYGEN OUTLET: additionalInstall additional oxygen outlet(s).

LOCATE: WALL AT HEAD OF BENCH.

ADAPTER TYPE: Ohio Diamond IIOxygen outlets to be Ohio Diamond II.

FLOWMETER:Supply dial type flowmeter.

OXYGEN WRENCH:Install oxygen wrench in oxygen compartment. Mount secure so not left hanging. Mount with length of chain or cable so not removable.

2 D BOTTLE MOUNT: single, 521 modelInstall a F.W. #521 oxygen bracket.

LOCATE: UNDER BENCH.! ! ! SEE DRAWING O.K t'Ll,E PHOTOS.

VACUUM OUTLET: inhalation wallA single vacuum panel shall be installed in the inhalation area. The outlet shall be of the same style as the oxygen system and hooked to the onboard vacuum pump.

ASPIRATOR: SSCORInstall an SSCOR aspirator. The system shall include a #22000 wall mounted regulator, and a #23002 canister holder. Plumb to the pump selected.

VACUUM PUMP:Install a CAPL #D34 SE (T282) 12vdc electric suction pump.

SPECIAL INSTRUCTION, OXYGEN & SUCTION! ! ! SET LOW PRESSURE ALARM TO 300 PSI.



CloseRea• 2 of38

HALLANDALE BEACH FIRE RESCUE121 S.W. 3RDSTREETHALLANDALE BEACH, FL 33009 -·Horton


TIMWILEY - .EMERGENCVVEHICLES Chassis:Model:

Option S t d Qt y Header/Description/Data Proposal Total

lu LETTERING


623

UP010000 0

UP01CDOO 0

UP01CS00 0

UP01FOOO 0

LETTERING:Lettering to be included.

TYPE: GOLD SCOTCHLITE WITH BLUE SCOTCHLITE SHADOW.!! 1 COPY EXISTING FLEET. SEE FILE PHOTOS FOR LAYOUT.

LETTERING REQUIRED ON CAB DOORSLettering shall be installed on the cab doors. This lettering shall meet the requirements listed below.

CONFIGURE: FABRICATE AND INSTALL CUSTOM DOOR LOGOS PER ARTWORK SENT ON 7-2-13.

LETTERING REQUIRED ON CURBSIDE OF BODYLettering shall be installed on the curbside of the body. This lettering shall meet the requirements listed below.

TYPE: GOLD SCOTCHLITE WITH BLUE SCOTCHLITE SHADOW.CONFIGURE: "HALLANDALE BEACH"

"FIRE-RESCUE"

!!! SIZE TO FIT.

LETTERING REQUIRED ON FRONT OF VEHICLELettering shall be installed on the front of the vehicle. This lettering shall meet the requirements listed below.

TYPE: GOLD SCOTCHLITE WITH BLUE SCOTCHLITE SHADOW.CONFIGURE: "FIRE-RESCUE" MIRROR IMAGE ON CHASSIS HOOD.

!!! SIZE TO FIT.!!! INSTALL CLEARANCE LABEL ON DRIVER SIDE FRONT WINDSHIELD. (VISABLE

TO DRIVER.)

UP01ROOO 0 LETTERING REQUIRED ON REAR OF VEHICLELettering shall be installed on the rear of the vehicle. This lettering shall meet the requirements listed below.


"FIRE-RESCUE"CENTERED ACROSS THE REAR ENTRY DOORS BELOW THE WINDOWS.

I I I SIZE TO FIT.



Close Page36 of38


Selected Feature List 11877121 S.W. 3RD STREETHALLANDALE BEACH, FL 33009 -·Horton Year: 2016

TIM WILEY

- .EMEACENCV VEHICLES Chassis:Model:


Option St d Qt y H e a der / D escription / D a ta Proposal Total

UP01SSOO 0 LETTERING REQUIRED ON STREET SIDE OF BODYLettering shall be installed on the street side of the body. This lettering shall meet the requirements listed below.


"FIRE-RESCUE"

!!! SIZE TO FIT.

UP03BOOO O 37 4" SHADED SCOTCHLITE LETTERING*

*

UP03COOO O 52 6" SHADED SCOTCHLITE LETTERING*

*

UP180000

USP00001

0

DOOR REFLECTORSInstall 2" x 12" strips of red Scotchlite at the top of each entry door placed horizontally.

SPECIAL INSTRUCTION, LETTERING

SUPPLY AND INSTALL (3) FLIP STYLE NUMBER PLACARD TO MATCH PREVIOUS UNITS.

zoo 0

202 0

INCLUDED IN PRICE: (1) INSPECTION TRIP TO HORTON FOR UP TO (2) TWO PEOPLE. INCLUDES, AIRFARE, MEALS, & LODGING.

SEE ATTACHED EQUIPMENT LIST FOR RADIOS, MDT MOUNT,COT AND STAIR CHAIR.

!!! RADIOS ARE NOT FINALIZED. WAITING ON FINAL MODEL SELECTION FROM HALLANDALE BEACH.

Factory Pickup and TransportationAllowance for vehicle pickup, transportation and drivers fee.

F.O.B. HALLANDALE BEACH, FL

Hall-Mark Fire Tuesday, October 27, 20/5

Close

Michael Day 2:12:33 PM Rei• 2 Page 37 of 38

HALLANDALE BEACH FIRE RESCUE121 S. W. 3RD STREETHALLANDALE BEACH, FL 33009 - ·Horton


TIM WILEY

Option

203 0

204 0

206 0

- •EMERGENCY VEHICLES Chassis:Model:

Std Qty Header(Desc,jption(Data Proposal Total

Dealer Prep. and Dealer DeliveryAllowance for vehicle preparation and delivery.

Fuel, Tags, Etc.Allowance for fuel, tags and administrative.

STATECONTRACT:This vehicle is subject to state contract pricing.

FLORIDA SHERIFFS ASSOCIATION CONTRACT# 15-11-0116 3/4% FEE


623

Total Configured Cost $313,467.00

Authorized Department Signature(s): ---�-----------



Close Page 38 of 38

selecte - hallandale beach, florida 10a/supp... · web view2015/12/16 · 1 s.w. 3r d street...

Documents