selection tables for butech's adhesives cerancol - a cement-based adhesive, ... kea sap. p/eu...

57 58

cerancol

Cement-based adhesives

Before using this product in any application not indicated in this catalogue, please perform a test or refer to the product's technical sheet.

cerancol is a cement-based adhesive, suitable for laying absorbent ceramic tiles indoors. Specially recommended for the installation of floor and wall coverings indoors, on cement-based supports.

It solves simply and effectively the laying of absorbent ceramic tiles indoors on cement-based supports. With this adhesive, tiles can be laid on a medIum-bed layer on uneven substrates. It can be laid on thicknesses up to 12 mm. Suitable for tiles laid directly on brick partition walls.

cerancol

Features:

Cement-based, single component adhesive. Optimal workability. Thixotropic. Application thickness up to 12 mm. Mixing water: 6.0 - 6.5 l per 25 kg bag

Recommended uses:

Medium and small format wall tile coverings for indoor use. Medium format floor tile coverings for indoor use. Uneven substrates.

Coverage:

20 x 30 cm tile 3 kg / m2 30 x 30 cm tile 3 kg / m2

30 x 60 cm tile 4 kg / m2 44 x 44 cm tile 4 kg / m2

Substrates:

Uncovered brick partition walls. Cement covered floors and walls .

Certifications/Standards:

EN 12004 Annex ZA

Materials:

Medium and small format ceramic tiles. Ceramic tiles with a water absorption > 0.5 % as per EN-ISO 10545-3.

KEA SAP P/EUB10903003 100004218 cerancol blanco 7,87 p/bagB10904004 100004219 cerancol gris 7,11 p/bag

Presentation Europallet25 kg bag 1,200 kg/pallet25 kg bag 1,200 kg/pallet

Packagingcerancol

wall tile floor tile floor tileporcelain tile

formatmedium

large format outdoor

Wet areas

butech's adhesives

WALL supe

r-on

e n

supe

r-flex

S2

one-

flex

n

fr-o

ne n

fr-o

ne

espe

cial

bt-1

000

n

bt-3

000

n

flexi

tec

n

tixoc

em +

tixoc

em

cera

ncol

polit

ech

n

Wall tileLarge format wall tilesGlass mosaicUrbatekSton-kerPar-kerNatural stone Water-sensitive stoneXLIGHT * * *

FLOOR supe

r-one

n

supe

r-flex

S2

one-

flex

n

fr-o

ne n

fr-o

ne

espe

cial

rapi

max

n

max

iflui

d

flexi

tec

n

tixoc

em +

tixoc

em

cera

ncol

polit

ech

n

Stoneware tilesPorcelain tilesUrbatekLarge format UrbatekSton-kerLarge format Ston-kerPar-kerLarge format Par-kerGlass mosaicNatural stone Water-sensitive stoneDQS *

SUBSTRATE / FINAL USE Ba

thro

omen

viro

nmen

t

Radi

ant

heat

ing

Out

door

flo

or

Faa

de

Pool

Mor

tar

Conc

rete

Plas

ter o

r A

nhyd

rite

Plas

terb

oard

pane

ls

Gla

zed

cera

mic

s

super-one n * **super-flex S2 * **one-flex n * **fr-one n * **fr-one especial *maxifluid **rapimax n **flexitec n **tixocem + **tixocemcerancolbt-1000 nbt-3000 npolitech n

*: Mix with unilax additive.**: Prime the substrate with uniprim

4. Once you have chosen an adhesive which is compatible with the tile and its final use, check its features in this catalogue.

3. Check which one of the compatible adhesives best matches its final use and substrate type.

1. Once chosen the wall tile model, determine the type of ceramic material. Refer to the manufacturer's catalogue:PORCELANOSA, VENIS, URBATEK and LANTIC COLONIAL.

2. Search in the wall or floor tables, given the case, the adhesives which are compatible with the type of ceramic material chosen.

Selection tables for butech's adhesives

Given the wide variety of natural stones and glass mosaics from L'ANTIC COLONIAL, we recommend to check the material's scratch and stain resistance.

Adhe

sives

for c

eram

ictil

e fix

ing

59 60

tixocem

Cement-based adhesives

Before using this product in any application not indicated in this catalogue, please perform a test or refer to the product's technical sheet.

tixocem is a type C1 T cement-based adhesive as per EN 12004, suitable for laying absorbent ceramic tiles using the thin-bed method, indoors and out. Its excellent conditions of use make it especially recommendable.

Single-component, high-tech adhesive for laying absorbent ceramic tiles. Excellent workability, easy to apply with extended working times. No sagging.

tixocem

Features:

Cement-based, single component adhesive. Optimal workability. Thixotropic. Application thickness up to 6 mm. Frost-resistant. Mixing water: 6,0 l per 25 kg bag

Recommended uses:

Medium and small format wall tile coverings for indoor use. Medium format floor tile coverings for indoor and outdoor use.

Coverage:

20 x 30 cm tile 3 kg / m2 30 x 30 cm tile 3 kg / m2

30 x 60 cm tile 4 kg / m2 44 x 44 cm tile 4 kg / m2

30 x 90 cm tile 5 kg / m2 44 x 66 cm tile 5 kg / m2

Substrates:

Cement covered floors and walls.

Certifications/Standards:

EN 12004 C1 T

Materials:

Medium and small format ceramic tiles. Ceramic tiles with a water absorption > 3 % as per EN-ISO 10545-3.

KEA SAP P/EUB11903003 100004220 tixocem blanco 8,89 p/bagB11904004 100004221 tixocem gris 8,38 p/bag

Presentation Europallet25 kg bag 1,400 kg/pallet25 kg bag 1,400 kg/pallet

Packagingtixocem

wall tile floor tile floor tileporcelain tile

formatmedium

large format outdoor

Wet areas

tixocem plus

Cement-based adhesives

Before using this product in any application not indicated in this catalogue, please perform a test or refer to the product's technical sheet.

tixocem plus is a type C1 TE cement-based adhesive as per EN 12004, suitable for laying absorbent ceramic tiles using the thin-bed method on cement, plasterboard substrates and for laying non-absorbent ceramic tiles on cement-based substrates. Specially recommended for laying porcelain tiles indoors.

It solves simply and effectively the laying of absorbent ceramic tiles on cement-based, plasterboard or brick supports. With this adhesive, tiles can be laid on a medIum-bed layer on uneven substrates. It can be laid on thicknesses up to 10 mm. Waterproof and frost-resistant.

tixocem plus

Features:

Cement-based, single component adhesive. Optimal workability. Thixotropic. Extended working times. Open time higher than 30 min. Application thickness up to 10 mm. Frost-resistant. Mixing water: 8 l per 25 kg bag

Recommended uses:

Medium and small format wall tile coverings for indoor use. Medium format porcelain floor tile coverings for indoor use. Medium format floor tile coverings for indoor and outdoor use. Uneven substrates.

Coverage:

20 x 30 cm tile 3 kg / m2 30 x 30 cm tile 3 kg / m2

30 x 60 cm tile 4 kg / m2 44 x 44 cm tile 4 kg / m2

30 x 90 cm tile 5 kg / m2 44 x 66 cm tile 5 kg / m2

Substrates:

Uncovered brick partition walls. Cement covered floors and walls . Plasterboards. On anhydrite or plaster substrates apply uniprim.

Certifications/Standards:

EN 12004 C1 TE

Materials:

Medium and small format ceramic tiles. Absorbent and non-absorbent ceramic tiles. Porcelain tiles with a water absorption < 0.5 % as per EN-ISO 10545-3.

KEA SAP P/EUB11906007 100043280 tixocem plus blanco 10,92 p/bag

Presentation Europallet25 kg bag 1,200 kg/pallet

Packagingtixocem plus

wall tile floor tileporcelain tile

large format cardboardplaster

pools outdoor

Porcelain floor tiles

Adhe

sives

for c

eram

ictil

e fix

ing

61 62

Adhe

sives

for c

eram

ictil

e fix

ing

Cement-based adhesives

Before using this product in any application not indicated in this catalogue, please perform a test or refer to the product's technical sheet.

flexitec n is a type C2 TE cement-based adhesive, suitable for laying porcelain tiles, on cement-based substrates or flexible substrates like plasterboard. Its excellent conditions of use make it especially recommendable.

A medium-elasticity cement-based adhesive for laying absorbent ceramic tiles, stone-ware or porcelain tiles using the thin-bed method. Thixotropic.

Features:

Cement-based, single component adhesive. Excellent adherence. Medium flexibility. Fine texture mortar, with excellent mixing and application features. High initial adherence and no sagging. Extended working times. Open time higher than 30 min. Application thickness up to 6 mm. Frost-resistant. Mixing water: - White: 7,25 - 7,75 l per 25 kg bag - Grey: 6,75 - 7,25 l per 25 kg bag

Recommended uses:

Indoor wall tile coverings. Indoor and outdoor porcelain tile coverings.

Coverage:

20 x 30 cm tile 3 kg / m2 30 x 30 cm tile 3 kg / m2

30 x 60 cm tile 4 kg / m2 44 x 44 cm tile 4 kg / m2

30 x 90 cm tile 5 kg / m2 44 x 66 cm tile 5 kg / m2

Substrates:

Cement covered floors and walls . Concrete slabs. Plasterboards. On anhydrite or plaster substrates apply uniprim.

Certifications/Standards:

Certifi CSTB Certified: CSTB 1061-222 MC 299EN 12004 C2 TE

Materials:

Large format absorbent ceramic tiles. Medium format non-absorbent ceramic tiles. Porcelain tile