self-aligning bearings contents
TRANSCRIPT
Self-aligning Bearings Contents
SQUAREFLANGE BEARING
Page B06-B15
OVALFLANGE BEARING
Page B16-B25
PILLOW BLOCKBEARING
Page B26-B29
COMPACT PILLOWBLOCK BEARING
Page B30-B33
B01
Self-aligning Bearings Contents
SIDEFLANGE BEARING
Page B34-B37
TAKE-UPBEARING
Page B38-B41
ROUNDFLANGE BEARING
Page B42-B49
TECHNICAL INFORMATIONS
Technical Informations see pages B51-B61
B06
B10 B14
B08
B30 B32
B02
New Products
SQUARE FLANGE
BEARING
COMPACT PILLOWBLOCK
LUBRICATED FOR LIFE
UCF/CL - HCF/CLLubricated for life
UCF/C - HCF/CNew version for shaft dia. 45-50( 102 mm interaxis )
UCF - HCFNew version for shaft dia. 45-50( 102 mm interaxis )
FNew version for shaft dia. 40 mm( 102 mm interaxis )
UCPA/C - HCPA/C UCPA - HCPA
Dse recommended
B03
B18
B20
B16
B34 B36
New Products
SIDE FLANGEBEARING
OVALFLANGEBEARING
LUBRICATED FOR LIFE
UCFL/CL - HCFL/CLLubricated for life
UCFL/C - HCFL/CNew version for shaft dia. 17 mm( 90 mm interaxis )
UCFL - HCFLNew version for shaft dia. 17 mm( 90 mm interaxis )
UCFB/C - HCFB/CNew version for shaft dia. 20-40
UCFB - HCFBNew version for shaft dia. 20-40
Dry use recommended
B04
antibacterial protection
TMR
Bacteria E.Coli inMicroban® plasticcompound compared toidentical untreaded plastic
Effective functionMicroban® material is effective against the most common bacteria that may affect food and cause a number of contamination and bad smells in the like of Escherichia Coli 0157, Salmonella, Listeria, S-Aureus, Campylobacter.The material is not meant to substitute the common hygienic norms of cleaning routines, offeringadditional protection in the regularplants cleaning cycle contest.
Long lasting effectiveness Lab test have clearly demonstrated that Microban® maintains its effective peculiarities for its entire life cycle.
Safe functionalityMicroban® has been approved foruse in direct contact with edible organic foods by the ScientificCommittee for Food (SCF) of the EU.In United States the EnvironmentProtection Agency has approved itsapplication in the transfer chainsprocesses.
Bearings with Microban® antibacterial protection
Solid flange bearingsSquare and oval flange bearings arealso available in the closed surfaceversion of the flange structure, an idealsolution for maximum sanification.
Without Microban®
protection, growth of bacteria on and around the product
With Microban® absence of bacteria on and around the product
Product Quality
B05
ISO3228
2°
2 2F 2RF
ISO dimensions• Overall dimensions of self-aligning bearings are in accordance with ISO 3228 standards • All self-aligning bearings are interchangeable with their correspondent cast iron versions
• Self-aligning bearings are equipped with stainless steel AISI 304/316 bushes to reinforce mounting holes • The reinforcing bushings avoid damages to the plastic flange during screw tightening
Fixing bushes
• Only best quality glass fibre reinforced polyamide PAFV/polypropylene PPFV thermoplastic resins are used for the self-aligning housings• The resins used guarantee high resistance to oxidation and corrosion and at the same time equal the strength offered by cast iron housings. They offer a better resistance to impact • Polyamide PAFV resins offer maximum heat and mechanical resistance • Polypropylene PPFV resins offer maximum resistance to chemical agents
Thermoplastic resins
• A system of waterproof seals protects the bearing from external environment• Protection from dust, humidity, washouts, chemical agents• The clip-on protection cover allows inspection of the bearing
Waterproof housingSeal
Seal
O-Ring
• Self-aligning bearings are equipped with ball bearings featuring multipurpose sealing systems. • 2-Superagriseal unit. The system consists of a metallic ring fitted with a low friction rubber sealing lip• 2F-Superagriseal unit + centrifuging ring. The system is further equipped with a metallic protection ring providing a centrifugal sealing action.• 2RF-Superagriseal unit + rubberised centrifuging ring. This system is used in stainless steel bearings. The upper lip of the centrifuging ring together with the grease trapped between the base seal and the ring itself guarantees maximum sealing capacity.
Bearing seals
• Waterproof self-aligning bearings feature seals for the protection against external environment• Viton rubber seals ensure maximum resistance to chemical agents
Support seals
• All bearings are self-aligning, capable of compensating misalignments up to 2°
Misalignment
Product Quality
UCF/C-HCF/C
B06
Waterproof housing
Grub screws or eccentric collar shaft locking
PAFV polyamide housing
High mechanical and heat resistance. Proof to dust,
humidity, washouts, steam, average aggressive
chemical agents.
PPFV polypropylene housing
Proof to highly aggressive chemical agents.
Inferior loading ability.
Solid flange bearings
They differ from standard flange
versions for their closed surface
structure, ideal for sanification.
Supports with Microban® antibacterial protection
Microban® material is effective against the most
common bacteria that may grow in foodstuff like
E. Coli, Salmonella, Listeria, S-Aureus, Campylobacter.
Square flange bearing units
MaterialPAFV polyamide housing Housing in reinforced polyamide PAFV resin (black) • Protection cover in polypropylene PP (orange) • Seal and O-Ring in NBR rubber (black) • Ball type nickel plated brass greasing nipple • Reinforcing bushings on mounting holes and washers in stainless steel AISI 304
PAFV polyamide housing with Microban® Housing in reinforced polyamide PAFV resin (grey) with Microban® • Protection cover in polypropylene PP (red) with Microban® • Seal and O-Ring in NBR rubber (black) • Ball type nickel plated brass greasing nipple • Reinforcing bushings on mounting holes and washers in stainless steel AISI 304
PPFV polypropylene housing with Microban® Housing in reinforced polypropylene PPFV resin (white) with Microban® • Protection cover in polypropylene PP (red) with Microban® • Seal and O-Ring in NBR rubber (black). On request supplied in Viton rubber (brown). Viton material offers high resistance to chemical agents • Ball type stainless steel AISI 316 greasing nipple • Reinforcing bushings on mounting holes and washers in stainless steel AISI 316.
Continuous operating temperature
in air : - 20 to + 60°C.
Bearing
Series YAT (grub screws shaft locking) • Series YET (eccentric collar shaft locking) • Chrome alloy steel • Superagriseal unit • Prelubricated with lithium/ calcium grease • Can be relubricated
Maximum allowed misalignment: 2°
Code : 67843.The system foresees semirigid dia. 4 mm tubes made out ofRilsan/Nylon. The tubes are connected to the joints bymeans of rapid graft.Material nickel plated brass.Dimension : 1/8 Gas.
Quick coupler for remote lubrication (accessory)
2525*303535*4040*45*50*
140001400019500255002550030700307003320035100
280028003900510051006140614066407020
78007800
11200153001530019000190002160023200
19550
19550207001955020700195503200032000
13800
13800138001380014375138002400024000
20700
20700253002070025300207003500035000
11500
11500138001150013800115002600026000
*= Version with special fixing holes1) = Values are valid for applications with < h 6 shaft tolerance. Time 0,77 values must beconsidered in all other cases.
dyn.CN
Bearing loadBearing unit max.
static load
Max.axialload
N
Shaftdia.d
mm
stat.CoN
Loads
PA FVN
PP FVN
PA FVN
PP FVN
Load coefficient
1)
1)
UCF/C-HCF/C
B07
e
a
ea
s
g
tz
dDf
Dg
i
12
11
21
2
11
2
11
Closed unit
Open unit
Closed unit
Series UCF/CGrub screws shaft locking
Series HCF/CEccentric collar shaft locking
Open unit
INDICATIVE GUIDE LINESFOR PRODUCT AVAILABILITIES: On request for appropriate
suitable quantities Please, contact our customer service for delivery times
On stock
Seal.O-Ring.
1
2
Bore in frame2)
Df WeightKgBearing
Housing material
Grub screws shaft locking • Closed unit
PolyamidePA FV
StandardFlange (black)Cover
(orange)
Polyamide PA FV with Microban®
Solid Flange(grey)Cover (red)
PolypropylenePP FV with Microban®
Solid Flange(white)Cover (red)
*= Version with special fixing holes2) = Dimensions Df max / Df min must be respected to ensure positive retention of the seals and to allow air bleeding during lubrication.3) = Solid flangePackaging : 6 pieces.
Grub screws shaft locking • Open unit
Eccentric collar shaft locking • Closed unit
Eccentric collar shaft locking • Open unit
Dimension in mm
UCF 205 CSUCF 205 CUCF 206 CUCF 207 C
SUCF 207 CUCF 208 C
SUCF 208 CSUCF 209 CSUCF 210 C
2525*303535*4040*45*50*
0,400,500,560,720,670,950,881,101,20
Series
111111111111111111
s
22,52626262630263030
g
16,819,32019,519,522192323
36,338,841434347,344,348,852
i z
525262727280808590
Dg max. min.
505060707078788388
454550555565657580
t
49,55455596165,5667373
dia.d
mm
YAT 205YAT 205YAT 206YAT 207YAT 207YAT 208YAT 208YAT 209YAT 210
0,400,500,560,720,670,950,881,101,20
111111111111111111
22,52626262630263030
16,819,32019,519,522192323
36,338,841434347,344,348,852
525262727280808590
505060707078788388
454550555565657580
49,55455596165,5667373
YAT 205YAT 205YAT 206YAT 207YAT 207YAT 208YAT 208YAT 209YAT 210
6457360304363112640186805223)
68916618196865923)
6866023)
651172
651182651192668982651202651212686672686682
680932
680942680952680962680972680982686752686762
Code
6462360305363172640286805823)
68926618296866123)
6866223)
651272
651282651292668992651302651312686692686702
680992
681002681012681022681032681042686772686782
0,440,570,630,900,851,071,291,39
1111111111111111
22,526262626263030
16,819,32019,519,5192323
40,342,846,748,948,951,75656
5252627272808590
5050607070788388
4545505555657580
49,554555961667373
YET 205YET 205YET 206YET 207YET 207YET 208YET 209YET 210
0,440,570,630,900,851,071,291,39
1111111111111111
22,526262626263030
16,819,32019,519,5192323
40,342,846,748,948,951,75656
5252627272808590
5050607070788388
4545505555657580
49,554555961667373
YET 205YET 205YET 206YET 207YET 207YET 208YET 209YET 210
680712
651372680722669022651382686712686722
681052
681062 681072681082681092686792686802
6804526030636215016804626806423)624396866323)686642
680732
651412680742669032651422686732686742
681102
681112681122681132681142686812686822
6804726030736214816804826806923)624496866523)6866623)
UCF 205 CSUCF 205 CUCF 206 CUCF 207 C
SUCF 207 CUCF 208 C
SUCF 208 CSUCF 209 CSUCF 210 C
2525*303535*4040*45*50*
HCF 205 CSHCF 205 CHCF 206 CHCF 207 C
SHCF 207 CSHCF 208 CSHCF 209 CSHCF 210 C
2525*303535*40*45*50*
HCF 205 CSHCF 205 CHCF 206 CHCF 207 C
SHCF 207 CSHCF 208 CSHCF 209 CSHCF 210 C
2525*303535*40*45*50*
Code
Coverorange
Coverred with
Microban®
Spare parts
681952681952631546820226353963539600882686972686972
681992
653322682042653342653342653352686982686982
6819726819726996568203261569263549600892686992687002
682012
653442682052669202653462653472687012687022
6819526819526315468202263539600882686972686972
681992
653322682042653342653352686982686982
68197268197269965682032615692600892686992687002
682012
653442682052669202653472687012687022
7083839283
10283
102102
e
98110110120110131110131131
a
7083839283
10283
102102
98110110120110131110131131
708383928383
102102
98110110120110110131131
708383928383
102102
98110110120110110131131
Version dia 45-50 mm are suppliedwithout o-ring
Version dia 45-50 mm are suppliedwithout o-ring
UCF/CL-HCF/CL
B08
TM
antibacterial protection
®
Continuous operating temperature
in air : - 20 to + 60°C.
Bearing
Series YAT (grub screws shaft locking) • Series YET (eccentric collar shaft locking) • Chrome alloy steel • Superagriseal unit • Prelubricated with lithium/ calcium grease.
Maximum allowed misalignment: 2°.
dyn.CN
PA FVN
PA FVN
Max.axialload
N
Shaftdia.d
mm
stat.CoN
Loads
Load coefficient
Bearing load Bearing unit max. static load
1)1)
*= Version with special fixing holes.1) = Values are valid for applications with < h 6 shaft tolerance. Time 0.77 values must beconsidered in all other cases.
2525*303535*4040*45*50*
140001400019500255002550030700307003320035100
280028003900510051006140614066407020
78007800
11200153001530019000190002160023200
19550
19550207001955020700195503200032000
13800
13800138001380014375138002400024000
PA FVN
PP FVN
20700
20700253002070025300207003500035000
11500
11500138001150013800115002600026000
MaterialPAFV polyamide housing Housing in reinforced polyamide PAFV resin (black) • Protection cover in polypropylene PP (orange) • Seal and O-Ring in NBR rubber (black) • Reinforcingbushings on mounting holes and washers in stainless steel AISI 304
PAFV polyamide housing with Microban® Housing in reinforced polyamide PAFV resin (grey) with Microban® • Protection cover in polypropylene PP (red) with Microban® • Seal and O-Ring in NBR rubber (black) • Reinforcing bushings on mounting holes and washers in stainlesssteel AISI 304
PPFV polypropylene housing with Microban® Housing in reinforced polypropylene PPFV resin (white) with Microban® • Protection cover in polypropylene PP (red) with Microban® • Seal and O-Ring in NBR rubber (black). On request supplied in Viton rubber (brown). Viton material offers high resistance to chemical agents Reinforcing bushings on mounting holes and washersin stainless steel AISI 316.
Life lubricated. The ball-bearings are pre-lubricated with a special greasekeeping the bearing for its whole life. No need for re-lubrication(see page B58 to calculate the grease life)Grub screws or eccentric collar shaft lockingPAFV polyamide housing. High mechanical and heat resistance. Proof todust, humidity, washouts, steam, average aggressive chemical agents.PPFV polypropylene housing. Proof to highly aggressive.chemical agents. Inferior loading ability.Solid flange bearings. They differ from standard flangeversions for their closed surface structure, ideal forsanification.Supports with Microban® antibacterial protection Microban® material is effective against the most common bacteria thatmay grow in foodstuff like E. Coli, Salmonella, Listeria, S-Aureus,Campylobacter.
LIFELUBRICATED
Dry use recommended
Square flange bearing units
UCF/CL-HCF/CL
B09
e
a
ea
s
gt
z
dDf
Dg
i
12
11
21
2
11
2
11
Dimensions in mm
Bore inframe
Dfmax. minSeries e s g i z t Dga
WeightKgBearing
dia.d
mm Code
*= Version with special fixing holesPackaging : 6 pieces.
UCF 205 CLSUCF 205 CLUCF 206 CLUCF 207 CL
SUCF 207 CLUCF 208 CL
SUCF 208 CLSUCF 209 CLSUCF 210 CL
2525*303535*4040*45*50*
0,400,500,560,720,670,950,881,101,20
111111111111111111
22,52626262630263030
16,819,32019,519,522192323
36,338,841434347,344,348,852
525262727280808590
505060707078788388
454550555565657580
49,55455596165,5667373
YAT205YAT205YAT206YAT207YAT207YAT208YAT208YAT209YAT210
0,400,500,560,720,670,950,881,101,20
111111111111111111
22,52626262630263030
16,819,32019,519,522192323
36,338,841434347,344,348,852
525262727280808590
505060707078788388
454550555565657580
49,55455596165,5667373
YAT205YAT205YAT206YAT207YAT207YAT208YAT208YAT209YAT210
64573L603043L63112L64018L
68916L61819L
651172L
651182L651192L668982L651202L651212L686672L686682L
680932L
680942L680952L680962L680972L680982L686752L686762L
64623L603053L63172L64028L
68926L61829L
651272L
651282L651292L668992L651302L651312L686692L686702L
680992L
681002L681012L681022L681032L681042L686772L686782L
0,440,570,630,900,851,071,291,39
1111111111111111
22,526262626263030
16,819,32019,519.5192323
40,342,846,748,948,951,75656
5252627272808590
5050607070788388
4545505555657580
49,554555961667373
YET 205YET 205YET206YET207YET207YET 208YET 209YET 210
0,440,570,630,900,851,071,291,39
1111111111111111
22,526262626263030
16,819,32019,519,5192323
40,342,846,748,948,951,75656
5252627272808590
5050607070788388
4545505555657580
49,554555961667373
YET 205YET 205YET206YET207YET207YET 208YET 209YET 210
680712L
651372L680722L669022L651382L686712L686722L
681052L
681062L 681072L681082L681092L686792L686802L
680452L603063L621501L680462L
62439L
680732L
651412L680742L669032L651422L686732L686742L
681102L
681112L681122L681132L681142L686812L686822L
680472L603073L621481L680482L
62449L
UCF 205 CLSUCF 205 CLUCF 206 CLUCF 207 CL
SUCF 207 CLUCF 208 CL
SUCF 208 CLSUCF 209 CLSUCF 210 CL
2525*303535*4040*45*50*
HCF 205 CLSHCF 205 CLHCF 206 CLHCF 207 CL
SHCF 207 CLSHCF 208 CLSHCF 209 CLSHCF 210 CL
2525*303535*40*45*50*
HCF 205 CLSHCF 205 CLHCF 206 CLHCF 207 CL
SHCF 207 CLSHCF 208 CLSHCF 209 CLSHCF 210 CL
2525*303535*40*45*50*
68195268195263154682022
63539600882
681992
653322682042653342653342653352686982686982
68197268197269965682032
63549600892
682012
653442682052669202653462653472687012687022
68195268195263154682022
600882
681992
653322682042653342653352686982686982
68197268197269965682032
600892
682012
653442682052669202653472687012687022
7083839283
10283
102102
98110110120110131110131131
7083839283
10283
102102
98110110120110131110131131
708383928383
102102
98110110120110110131131
708383928383
102102
98110110120110110131131
Coperchio arancio
Coperchio rosso
Microban®
Code
Series UCF/CL - Grub screws shaft locking Series HCF/CL - Eccentric collar shaft locking
INDICATIVE GUIDE LINESFOR PRODUCT AVAILABILITIES: On request for appropriate
suitable quantities Please, contact our customer service for delivery times
On stock
Closed unit
Open unit
Closed unit
Open unit
Seal.O-Ring.
1
2
Housing material
PolyamidePA FV
StandardFlange (black)Cover
(orange)
Polyamide PA FV with Microban®
Solid Flange(grey)Cover (red)
PolypropylenePP FV with Microban®
Solid Flange(white)Cover (red)
Spare parts
Version dia 45-50 mm are suppliedwithout o-ring
Version dia 45-50 mm are suppliedwithout o-ring
Grub screws shaft locking • Closed unit
Grub screws shaft locking • Open unit
Eccentric collar shaft locking • Closed unit
Eccentric collar shaft locking • Open unit
t
d
2
1
1
t
d
2
1
UCF-HCF
B10
Protection covers (accesory)
Closed cover
SealSeal O-Ring2
1
dia.d
mm Code
49,55455596165,5667373
49,55455596165,5667373
Closed cover supplied with seals
Open cover supplied with seals
tmm
2525*303535*4040*45*50*
2525*303535*4040*45*50*
Cover orange
Coverred
Microban®
Accessories
681952681952631546820226315463539600882686972686972
681992
653322682042653342653342653352686982686982
6819726819726996568203261569263549600892686992687002
682012
653442682052669202653462653472687012687022
*= Version with special fixing holesDia 45/50 suppliedwithout o-ring
Dia 45/50 suppliedwithout o-ring
Open cover
Square flange bearing units
Accessories
Fijación eje con pasador o collarin excéntricoVersión con rodamiento YAR 2FEl rodamiento con reten de 2 pantallas garantiza una mayor estanqueidad contra el polvo y los agentes no corrosivos. Versión con rodamiento inoxidable YAR 2RFEl rodamiento de acero inoxidable AISI 420 con reten de 2 pantallas engomadas, garantiza la estanqueidad contra humedad, vapores, líquidos, agentes químicos de media agresividad. Capacidad de carga inferior.Versión con rodamiento YATLa guarnición de 1 pantalla garantiza la estanqueidad contra el polvo.
Soportes con protección antibactérica Microban®
Microban® es eficaz contra las bacterias que pueden crecer en los alimentos como E.coli, Salmonela, Listeria, S-aureus, Campilobacterias.MaterialesLa poliamida PAFV garantiza la máxima resistencia mecánica y térmica. El polipropilenoPP FV garantiza elevada resistencia a los agentes químicos, pero menor capacidad de carga.
MaterialPAFV polyamide housing Housing in reinforced polyamide PAFV resin (black) • Ball type nickel plated brass greasing nipple • Reinforcing bushings on mounting holes and washers in stainless steel AISI 304.
PAFV polyamide housing with Microban® Housing in reinforced polyamide PAFV resin (grey) with Microban® • Bearing instainless steel AISI 420 • Ball type nickel plated brass greasing nipple • Reinforcing bushings on mounting holes and washers in stainless steel AISI 304.
PPFV polypropylene housing with Microban® Housing in reinforced polypropylene PPFV resin (white) with Microban® • Bearing in stainless steel AISI 420 • Ball type stainless steel AISI 316 greasing nipple • Reinforcing bushings on mounting holes and washers in stainless steel AISI 316.
Continuous operating temperature
in air : - 20 to + 60°C.
Bearing
Series YAR 2F (grub screws shaft locking, chrome alloy steel, Superagriseal unitplus centrifuging ring) • Series YAR 2RF (grub screws shaft locking, stainless steel AISI 420, Superagriseal unit plus rubberised centrifuging ring) • Series YAT (grub screws shaft locking, chrome alloy steel, Superagriseal unit) • Series YET (eccentric collar shaft locking, chrome alloy steel, Superagriseal unit) • Prelubricated with lithium/ calcium grease • Can be relubricated
Maximum allowed misalignment: 2°.
Quick coupler for remote lubrication (accesory)
Code : 67843.The system foresees semirigid dia. 4 mm tubes made out ofRilsan/Nylon. The tubes are connected to the joints bymeans of rapid graft.Material nickel plated brass.Dimension : 1/8 Gas.
dyn.CN
PA FVN
PA FVN
Max.axialload
N
Shaftdia.d
mm
stat.CoN
Loads
Load coefficient
Bearing loadYAR 2F - YAT - YET
dyn.CN
Max.axialload
N
stat.CoN
Load coefficient
Bearing loadYAR 2RF
Bearing unit max. static load
1) 1)1)1)
*= Version with special fixing holes.1) = Values are valid for applications with < h 6 shaft tolerance. Time 0.77 values must beconsidered in all other cases.
2525*303535*4040*4550
140001400019500255002550030700307003320035100
19550
19550207001955020700195503200032000
20700
20700253002070025300207003500035000
280028003900510051006140614066407020
78007800
11200153001530019000190002160023200
11900
1625021600216002600026000
2380
32504320432052005200
7800
1120015300153001900019000
dyn.CN
Axial-Belastung
maxN
ØWelle
dmm
Belastbarkeit
Tragzahl
LagerbelastungYAR 2F - YAT - YET
dyn.CN
Axial-Belastung
maxN
stat.CoN
Tragzahl
LagerbelastungYAR 2RF
Max. zul. staBelastun
des Gehäu
UCF-HCF
B11
e
a
ea
s
d
z
g
l
i
h
Df
Dimensions in mm WeightKgBearing
Bore in frame
Dfmm
UCF 205SUCF 205UCF 206UCF 207
SUCF 207UCF 208
SUCF 208SUCF 209SUCF 210
2525*303535*4040*45*50*
0,440,510,570,720,650,950,880,950,88
Series
7083839283
10283
102102
e
111111111111111111
s
22,52626262630263030
g
16,819,32019,515,522192323
36,639,142,24540,952,252,253,255,6
i z
292934395044554954
l
27,531,531,53231,536363838
98110110120110131110131131
a
dia.d
mm
YAR 205 2FYAR 205 2FYAR 206 2FYAR 207 2FYAR 207 2FYAR 208 2FYAR 208 2FYAR 209 2FYAR 210 2F
645336031636072264058684656895661719689232689242
Code
UCF 205UCF 206UCF 207
SUCF 207UCF 208
SUCF 208
25303535*4040*
0,440,570,720,650,950,88
70839283
10283
111111111111
22,52626263026
16,82019,515,5•2219
36,642,24540,952,252,2
293439504455
27,531,53231,53636
98110120110131110
YAR 205 2RFYAR 206 2RFYAR 207 2RFYAR 207 2RFYAR 208 2RFYAR 208 2RF
646592646602646612646622646632646642
681582681592681602681612681622681632
681642681652681662681672681682681692
UCF 205SUCF 205UCF 206UCF 207
SUCF 207UCF 208
SUCF 208SUCF 209SUCF 210
HCF 205SHCF 205HCF 206HCF 207
SHCF 207SHCF 208SHCF 209SHCF 210
2525*303535*4040*45*50*
0,390,480,540,690,620,920,850,871,04
7083839283
10283
102102
111111111111111111
22,52626262630263030
16,819,32019,515,5•22192323
36,338,84142,838,847,34848,850,6
292934393944444954
27,531,531,53231,536363838
98110110120110131110131131
YAT 205YAT 205YAT 206YAT 207YAT 207YAT 208YAT 208YAT 209YAT 210
656752603143666442666452682062666462681552686852686862
2525*303535*40*45*50*
0,430,550,610,870,821,040,871,04
708383928383
102102
1111111111111111
22,526262626263030
16,819,32019,519,5192323
14,314,315,917,517,519191919
h
14,315,917,517,51919
40,342,846,748,948,451,75656
2929343939444954
27,531,531,53231,5363838
98110110120110110131131
YET 205YET 205YET 206YET 207YET 207YET 208YET 209YET 210
681562603153623296815726813921)
62349686912686922
666612
666622666632681212666642681222686872686882
681282
681292681302681312681322681332686892686902
681412
681422681432681442681452686932686942
681502
681512681522681532681542686952686962
Housing material
PolyamidePA FV
StandardFlange (black)
PolyamidePA FV with Microban®
Solid Flange(grey)
PolypropylenePP FV with Microban®
Solid Flange(white)
Version withbearing YAR 2F
Version with stainless steel bearing YAR 2RF
Version withbearing YAT
Series UCFGrub screws shaft locking
Series HCFEccentric collar shaft locking
Grub screws shaft locking • Version with bearing YAR 2F
*= Version with special fixing holes1) Solid flange.• = Solid flange 19,5Packaging : 6 pieces.
Grub screws shaft locking • Version with stainless steel bearing YAR 2RF
Grub screws shaft locking • Version with bearing YAT
Eccentric collar shaft locking
INDICATIVE GUIDE LINESFOR PRODUCT AVAILABILITIES: On request for appropriate
suitable quantities Please, contact our customer service for delivery times
On stock
UCFS/C - HCFS/C
B12
Austenitic stainless steel surface
Waterproof housing
Grub screws or eccentric collar shaft locking
Solid flange
Patend pending design with perfect seal: rubber
makes one-body with steel and engineering plastic
bearing seat.
Square flange bearing units
MaterialHousing in reinforced polyamide PAFV resin (black) • Austenitic Stainless steel surface • Sealing in NBR rubber (black) • Protection cover in polypropylene PP (orange) • Seal and O-Ring in NBR rubber (black) • Ball type nickel plated brassgreasing nipple.
Continuous operating temperature
in air : - 20 to + 60°C.
Maximum allowed misalignment: 2°.
Bearing
Series YAT (grub screws shaft locking) • Series YET (eccentric collar shaft locking) • Chrome alloy steel • Superagriseal unit • Prelubricated with lithium/ calcium grease • Can be relubricated
Code : 67843.The system foresees semirigid dia. 4 mm tubes made out ofRilsan/Nylon. The tubes are connected to the joints bymeans of rapid graft.Material nickel plated brass.Dimension : 1/8 Gas.
Quick coupler for remote lubrication (accessory)
dyn.CN
Bearing loadBearing unit max.
static load
Max.axialload
N
Shaftdia.d
mm
3035*40*
195002550030700
390051006140
stat.CoN
112001530019000
207002070020700
Loads
253002530025300
Load coefficient
PA FVN
PA FVN
1)1)
*= Version with special fixing holes1) = Values are valid for applications with < h 6 shaft tolerance. Time 0.77 values must beconsidered in all other cases.
PATENT PENDING
UCFS/C-HCFS/C
B13
Closed unit
Open unit
Open unit
Series UCFS/CGrub screws shaft locking
Series HCFS/CEccentric collar shaft locking Closed unit
1
2
Seal.O-Ring.
*= Version with special fixing holes1) = Dimensions Df max / Df min must be respected to ensure positive retention of the seals and to allow air bleeding during lubrication.Packaging : 6 pieces.
Dimensions in mmBore in frame1)
Df
SeriesWeight
KgBearing
Grub screws shaft locking • Closed unit
Grub screws shaft locking • Open unit
Eccentric collar shaft locking • Closed unit
Eccentric collar shaft locking • Open unit
Code
Housing material
PolyamidePA FV
with stainlesssteel surfaceSolid Flange
Cover (orange)
UCFS 206 CSUCFS 207 CSUCFS 208 C
3035*40*
0,730,840,94
838383
e
10,510,510,5
s
15,915,915,9
g
222222
4345,347,3
i z
627280
Dg max. min.
607078
505565
t
65,865,865,8
111111111
a
dia.d
mm
YAT 206YAT 207YAT 208
615622615632615642
UCFS 206 CSUCFS 207 CSUCFS 208 C
3035*40*
0,730,840,94
838383
10,510,510,5
15,915,915,9
222222
4345,347,3
627280
607078
505565
65,865,865,8
111111111
YAT 206YAT 207YAT 208
615652615662615672
HCFS 206 CSHCFS 207 CSHCFS 208 C
3035*40*
0,800,901,00
838383
10,510,510,5
15,915,915,9
222222
4951,455
627280
607078
505565
65,865,865,8
111111111
YET 206YET 207YET 208
670402670412670422
HCFS 206 CSHCFS 207 CSHCFS 208 C
3035*40*
0,800,901,00
838383
10,510,510,5
15,915,915,9
222222
4951,455
627280
607078
505565
65,865,865,8
111111111
YET 206YET 207YET 208
670432670442670452
Code
Coverorange
Spare parts
635396353963539
61568261569263549
635396353963539
61568261569263549
INDICATIVE GUIDE LINESFOR PRODUCT AVAILABILITIES: Please, contact our customer
service for delivery times On stock
ea
ea
s
d
i
g
t
z
DfDg
1
1
2
1
2
1
2
1
1
2
F
B14
Waterproof housing
Shaft shoulders locking
High axial load capacity.
PAFV polyamide housing
High mechanical and heat resistance. Proof to dust,
humidity, washouts, steam, average aggressive
chemical agents
PPFV polypropylene housing
Proof to highly aggressive chemical agents.
Inferior loading ability.
MaterialPAFV polyamide housing Housing in reinforced polyamide PAFV resin (black) • Seal and O-Ring in NBR rubber (black) • Ball type nickel plated brass greasing nipple • Reinforcing bushings on mounting holes and washers in stainless steel AISI 304 .
PPFV polypropylene housing Housing in reinforced polypropylene PPFV resin (black) • Seal and O-Ring in NBR rubber (black). On request supplied in Viton rubber (brown). Viton material offers high resistance to chemical agents • Ball type stainless steel AISI 316 greasing nipple • Reinforcing bushings on mounting holes and washers in stainless steel AISI 316.
Continuous operating temperature
in air : - 20 to + 60°C.
Maximum allowed misalignment: 2
dyn.CN
Bearing loadBearing unit max.
static load
stat.CoN
Loads
PA FVN
PP FVN
PA FVN
PP FVN
PA FVN
PP FVN
Load coefficient
*= Version with special fixing holes.
Bearingdia.d
mm
Shaftdia.d
mm
25303535*4040*
30354040*4545*
143001560019000190001990019900
400046506000600069506950
218502185021850218502300021850
161001610017250161001725016100
172501725017250172501840017250
138001380013800138001435013800
80501840019550184001955018400
57501035013800103501380010350
Square flange bearing units
Bearing
Series 1200 self aligning ball bearing • Chrome alloy steel • Supplied withoutgrase • To be prelubricated with lithium / calcium grease during first installation
Code : 67843.The system foresees semirigid dia. 4 mm tubes made out ofRilsan/Nylon. The tubes are connected to the joints bymeans of rapid graft.Material nickel plated brass.Dimension : 1/8 Gas.
Quick coupler for remote lubrication (accessory)
F
B15
e
a
ea
s
g
hda
i
t
dDf
Dg
1 1
1
Dimensions in mm
Series e s g i h taWeight
KgBearing
Bearingdia.d
mm
Shaftdia.d
mm
Housing material
Closed unit
Open unit
Code
PolyamidePA FV
StandardFlange (black)
PolypropylenePP FV
StandardFlange(black)
Bore in frame1)
Df
Dg max. min.
*= Version with special fixing holes1) = Dimensions Df max / Df min must be respected to ensure positive retention of the seals and to allow air bleeding during lubrication.Packaging : 6 pieces.
1)
F 1205F 1206F 1207SF1207F 1208
SF 1208
25303535*4040*
0,360,530,620,600,850,78
70839283
10283
111111111111
22,52626263026
18,51919,51924,519
1111111015,510
36,54039,5394539
526272728080
506070707878
475260606565
98110120110131110
30354040*4545*
120512061207120712081208
6443365811639786997826887669988
681702681712681722699802681732681742
F 1205F 1206F 1207SF1207F 1208
SF 1208
25303535*4040*
0,360,530,620,600,850,78
70839283
10283
111111111111
22,52626263026
18,51919,51924,519
1111111015,510
36,54039,5394539
526272728080
506070707878
475260606565
98110120110131110
30354040*4545*
120512061207120712081208
6448365901639886997926888669998
681752681762681772699812681782681792
Closed unit
Open unit
1 Seal.
INDICATIVE GUIDE LINESFOR PRODUCT AVAILABILITIES: Please, contact our customer
service for delivery times On stock
UCFL/C-HCFL/C
B16
Waterproof housing
Grub screws or eccentric collar shaft locking
PAFV polyamide housing
High mechanical and heat resistance. Proof to dust,
humidity, washouts, steam, average aggressive
chemical agents.
PPFV polypropylene housing
Proof to highly aggressive chemical agents.
Inferior loading ability.
Solid flange bearings
They differ from standard flange
versions for their closed surface
structure, ideal for sanification.
Supports with Microban® antibacterial protection
Microban® material is effective against the most
common bacteria that may grow in foodstuff like
E. Coli, Salmonella, Listeria, S-Aureus, Campylobacter.
MaterialPAFV polyamide housing Housing in reinforced polyamide PAFV resin (black) • Protection cover in polypropylene PP (orange) • Seal and O-Ring in NBR rubber (black) • Ball type nickel plated brass greasing nipple • Reinforcing bushings on mounting holes and washers in stainless steel AISI 304
PAFV polyamide housing with Microban® Housing in reinforced polyamide PAFV resin (grey) with Microban® • Protection cover in polypropylene PP (red) with Microban® • Seal and O-Ring in NBR rubber (black) • Ball type nickel plated brass greasing nipple • Reinforcing bushings on mounting holes and washers in stainless steel AISI 304
PPFV polypropylene housing with Microban® Housing in reinforced polypropylene PPFV resin (white) with Microban® • Protection cover in polypropylene PP (red) with Microban® • Seal and O-Ring in NBR rubber (black). On request supplied in Viton rubber (brown). Viton material offers high resistance to chemical agents • Ball type stainless steel AISI 316 greasing nipple • Reinforcing bushings on mounting holes and washers in stainless steel AISI 316.
Continuous operating temperaturein air : - 20 to + 60°C.
Maximum allowed misalignment: 2°.
Bearing
Series YAT (grub screws shaft locking) • Series YET (eccentric collar shaft locking) • Chrome alloy steel • Superagriseal unit • Prelubricated with lithium/ calcium grease • Can be relubricated
dyn.CN
Bearing loadBearing unit max.
static load
Max.axialload
N
Shaftdia.d
mm
stat.CoN
Loads
PA FVN
PP FVN
PA FVN
PP FVN
Load coefficient
*= Version with special fixing holes1) = Values are valid for applications with < h 6 shaft tolerance. Time 0.77 values must beconsidered in all other cases.
1)
1)
17202525*3030*3535*4040*
9500127001400014000195001950025500255003070030700
1900254028002800390039005100510061406140
4750655078007800
112001120015300153001900019000
97759775
1092510925149501495014950149501495014950
6325632574757475920092009200920097759200
97759775
1150011500143751437513225143751495014375
6900690074757475
115001150010925115001092511500
Oval flange bearing units
Code : 67843.The system foresees semirigid dia. 4 mm tubes made out ofRilsan/Nylon. The tubes are connected to the joints bymeans of rapid graft.Material nickel plated brass.Dimension : 1/8 Gas.
Quick coupler for remote lubrication (accessory)
UCFL/C-HCFL/C
B17
e
a
b
s
d
z
t
g
i
Df
Dg
12
12
1
12
12
11
Closed unit Open
unitClosed unit
Series UCFL/CGrub screws shaft locking
Series HCFL/CEccentric collar shaft locking
Open unit
1
2
Only for series 2061
Seal.O-Ring.
Dimensions in mm
Bore in frame2)
Df
SeriesWeight
KgBearing
Housing material
Grub screws shaft locking • Closed unit
PolyamidePA FV
StandardFlange (black)Cover
(orange)
PolyamidePA FV with Microban®
Solid Flange(grey)Cover (red)
PolypropylenePP FV with Microban®
Solid Flange(white)Cover (red)
*= Version with special fixing holesSUCFL206C/SHCFL206C: Assembly with cylindrical head screws2) = Dimensions Df max / Df min must be respected to ensure positive retention of the seals and to allow air bleeding during lubrication.3) = Solid flangePackaging : 6 pieces.
Grub screws shaft locking • Open unit
Eccentric collar shaft locking • Closed unit
Eccentric collar shaft locking • Open unit
SUCFL 203 CUCFL 204 CUCFL 205 CSUCFL 205 CUCFL 206 CSUCFL 206 CUCLF 207 CSUCFL 207 CUCLF 208 CSUCFL 208 C
17*202525*3030*3535*4040*
0,220,250,330,330,420,420,650,700,900,74
90909990
11799
130117144117
e
62627171858593
112102112
b
11111111111111111111
s
202022,522,5262626263026
15,215,216,816,8202019,519,52219
g i
40475252626272728080
Dg max. min.
38455050606070707878
33404545505055556565
z
31,133,536,336,34141454347,345
t
464649,549,55555596265,562
116116130130148148162148176148
a
dia.d
mm
YAT 203YAT 204YAT 205YAT 205YAT 206YAT 206YAT 207YAT 207YAT 208YAT 208
60376369016685236875623)
683996875723)
6481316977023)
6724116977123)
603783650972650982687642650992687652651002697782651012697792
Code
SUCFL 203 CUCFL 204 CUCFL 205 CSUCFL 205 CUCFL 206 CSUCFL 206 CUCFL 207 CSUCFL 207 CUCFL 208 CSUCFL 208 C
17*202525*3030*3535*4040*
0,220,250,330,330,420,420,650,700,900,74
90909990
11799
130117144117
62627171858593
112102112
11111111111111111111
202022,522,5262626263026
15,215,216,816,8202019,519,52219
40475252626272728080
38455050606070707878
33404545505055556565
31,133,536,336,34141454347,345
464649,549,55555596265,562
116116130130148148162148176148
YAT 203YAT 204YAT 205YAT 205YAT 206YAT 206YAT 207YAT 207YAT 208YAT 208
60381369026685336875823)
684096875923)
6481416977223)
6724216977323)
6038636790526790626876023)
6790726876123)
6790826977423)
6790926977523)
6039136791026791126876223)
6791226876323)
6791326977623)
6791426977723)
603833651072651082687662651092687672651102697802651112697812
603883679352679362687682679372687692679382697822679392697832
603933679402679412687702679422687712679432697842679442697852
603803679652679662687722679672687732679682697862679692697872
603853679702679712687742679722687752679732697882679742697892
603903679752679762687762679772687772679782697902679792697912
603953679802679812687782679822687792679832697922679842697932
SHCFL 203 CHCFL 204 CHCFL 205 CSHCFL 205 CHCFL 206 CSHCFL 206 CHCFL 207 CSHCFL 207 CHCLF 208 CSHCFL 208 C
17*202525*3030*3535*4040*
0,270,300,370,370,490,490,830,881,090,93
90909990
11799
130117144117
62627171858593
112102112
11111111111111111111
202022,522,5262626263026
15,215,216,816,8202019,519,52219
40475252626272728080
38455050606070707878
33404545505055556565
37,338,740,340,346,746,748,948,454,751,7
494949,549,5555559627168
116116130130148148162148176148
YET 203YET 204YET 205YET 205YET 206YET 206YET 207YET 207YET 208YET 208
SHCFL 203 CHCFL 204 CHCFL 205 CSHCFL 205 CHCFL 206 CSHCFL 206 CHCFL 207 CSHCFL 207 CHCFL 208 CSHCFL 208 C
17*202525*3030*3535*4040*
0,270,300,370,370,490,490,830,881,090,93
90909990
11799
130117144117
62627171858593
112102112
11111111111111111111
202022,522,5262626263026
15,215,216,816,8202019,519,52319
40475252626272728080
38455050606070707878
33404545505055556565
37,338,740,340,346,746,748,948,454,751,7
494949,549,55555596254,768
116116130130148148162148176148
YET 203YET 204YET 205YET 205YET 206YET 206YET 207YET 207YET 208YET 208
Code
6819426819426819526819526315463154682022635396353963539
681982681982681992681992653322653322682042653342653342653342
69616268196268197268197269965699656820326156926354963549
696172682002682012682012653442653442682052669202653462653462
681942681942681952681952631546315468202263539600882600882
681982681982681992681992653322653322682042653342653352653352
6961626819626819726819726996569965682032615692600892600892
696172682002682012682012653442653442682052669202653472653472
Coverorange
Coverred with
Microban®
Spare parts
INDICATIVE GUIDE LINESFOR PRODUCT AVAILABILITIES: On request for appropriate
suitable quantities Please, contact our customer service for delivery times
On stock
UCFL/CL-HCFL/CL
B18
TM
antibacterial protection
®
MaterialPAFV polyamide housing Housing in reinforced polyamide PAFV resin (black) • Protection cover in polypropylene PP (orange) • Seal and O-Ring in NBR rubber (black) • Reinforcingbushings on mounting holes and washers in stainless steel AISI 304
PAFV polyamide housing with Microban® Housing in reinforced polyamide PAFV resin (grey) with Microban® • Protection cover in polypropylene PP (red) with Microban® • Seal and O-Ring in NBR rubber (black) • Reinforcing bushings on mounting holes and washers in stainlesssteel AISI 304
PPFV polypropylene housing with Microban® Housing in reinforced polypropylene PPFV resin (white) with Microban® • Protection cover in polypropylene PP (red) with Microban® • Seal and O-Ring in NBR rubber (black). On request supplied in Viton rubber (brown). Viton material offers high resistance to chemical agents • Reinforcing bushings on mounting holes and washersin stainless steel AISI 316.
Life lubricated The ball-bearings are pre-lubricated with a special greasekeeping the bearing for its whole life. No need for re-lubrication(see page B58 to calculate the grease life)Grub screws or eccentric collar shaft lockingPAFV polyamide housing. High mechanical and heat resistance. Proof todust, humidity, washouts, steam, average aggressive chemical agents.PPFV polypropylene housing. Proof to highly aggressive.chemical agents. Inferior loading ability.Solid flange bearings. They differ from standard flangeversions for their closed surface structure, ideal forsanification.Supports with Microban® antibacterial protection Microban® material is effective against the most common bacteria thatmay grow in foodstuff like E. Coli, Salmonella, Listeria, S-Aureus,Campylobacter.
Continuous operating temperature
in air : - 20 to + 60°C.
Maximum allowed misalignment: 2°.
Bearing
Series YAT (grub screws shaft locking) • Series YET (eccentric collar shaft locking) • Chrome alloy steel • Superagriseal unit • Prelubricated with lithium/ calcium grease
dyn.CN
Bearing loadBearing unit max.
static load
Max.axialload
N
Shaftdia.d
mm
stat.CoN
Loads
PA FVN
PP FVN
PA FVN
PP FVN
Load coefficient
*= Version with special fixing holes1) = Values are valid for applications with < h 6 shaft tolerance. Time 0,77 values must beconsidered in all other cases.
1)1)
17202525*3030*3535*40
95001270014000140001950019500255002550030700
190025402800280039003900510051006140
4750655078007800
1120011200153001530019000
97759775
1092510925149501495014950
14950
6325632574757475920092009200
9775
97759775
1150011500143751437513225
14950
6900690074757475
115001150010925
10925
Oval flange bearing units
LIFELUBRICATED
Dry use recommended
UCFL/CL-HCFL/CL
B19
e
a
b
s
d
z
t
g
i
Df
Dg
12
12
1
12
12
1
Closed unit
Open unit Closed
unit
Series UCFL/CLGrub screws shaft locking
Series HCFL/CLEccentric collar shaft locking
Open unit
1
2
Only for series 2061
Seal.O-Ring.
Dimensions in mm
Bore in frame
Df
SeriesWeight
KgBearing
Housing material
PolyamidePA FV
StandardFlange (black)Cover
(orange)
PolyamidePA FV with Microban®
Solid Flange(grey)Cover (red)
PolypropylenePP FV with Microban®
Solid Flange(white)Cover (red)
e Dg max. min.z ta
dia.d
mm Code Code
Coverorange
Coverred with
Microban®
Spare parts
b s g i
UCFL 204 CLUCFL 205 CL
SUCFL 205 CLUCFL 206 CL
SUCFL 206 CLUCFL 207 CL
SUCFL 207 CLUCFL 208 CL
SUCFL 208 CL
202525*3030*3535*4040*
0,250,330,330,420,420,650,700,900,74
909990
11799
130117144117
627171858593
112102112
111111111111111111
2022,522,5262626263026
15,216,816,8202019,519,52319
4649,549,55555596265,562
475252626272728080
455050606070707878
404545505055556565
33,536,336,3414145435245
116130130148148162148176148
YAT 204YAT 205YAT 205YAT 206YAT 206YAT 207YAT 207YAT 208YAT 208
650972L650982L687642L650992L687652L651002L697782L651012L697792L
679652L679662L687722L679672L687732L679682L697862L679692L697872L
69016L68523L687562L2)
68399L687572L2)
648131L697702L2)
672411L697712L2)
6819426819526819526315463154682022635396353963539
681982681992681992653322653322682042653342653342653342
UCFL 204 CLUCFL 205 CL
SUCFL 205 CLUCFL 206 CL
SUCFL 206 CLUCFL 207 CL
SUCFL 207 CLUCFL 208 CL
SUCFL 208 CL
0,250,330,330,420,420,650,700,900,74
627171858593
112102112
111111111111111111
2022,522,5262626263026
15,216,816,8202019,519,52319
4649,549,55555596265,562
475252626272728080
455050606070707878
404545505055556565
33,536,336,3414145435245
YAT 204YAT 205YAT 205YAT 206YAT 206YAT 207YAT 207YAT 208YAT 208
651072L651082L687662L651092L687672L651102L697802L651112L697812L
679702L679712L687742L679722L687752L679732L697882L679742L697892L
202525*3030*3535*4040*
909990
11799
130117144117
116130130148148162148176148
69026L68533L687582L2)
68409L687592L2)
648141L697722L2)
672421L697732L2)
68196268197268197269965699656820326156926354963549
682002682012682012653442653442682052669202653462653462
HCFL 204 CLHCFL 205 CL
SHCFL 205 CLHCFL 206 CL
SHCFL 206 CLHCFL 207 CL
SHCFL 207 CLHCFL 208 CL
SHCFL 208 CL
0,300,370,370,490,490,830,881,090,93
627171858593
112102112
111111111111111111
2022,522,5262626263026
15,216,816,8202019,519,52319
4949,549,5555559627168
475252626272728080
455050606070707878
404545505055556565
38,740,340,346,746,748,948,455,751,7
YET 204YET 205YET 205YET 206YET 206YET 207YET 207YET 208YET 208
679352L679362L687682L679372L687692L679382L697822L679392L697832L
679752L679762L687762L679772L687772L679782L697902L679792L697912L
202525*3030*3535*4040*
909990
11799
130117144117
116130130148148162148176148
679052L679062L687602L2)
679072L687612L2)
679082L697742L2)
679092L697752L2)
681942681952681952631546315468202263539600882600882
681982681992681992653322653322682042653342653352653352
HCFL 204 CLHCFL 205 CL
SHCFL 205 CLHCFL 206 CL
SHCFL 206 CLHCFL 207 CL
SHCFL 207 CLHCFL 208 CL
SHCFL 208 CL
0,300,370,370,490,490,830,881,090,93
627171858593
112102112
111111111111111111
2022,522,5262626263026
15,216,816,8202019,519,52319
4949,549,5555559627168
475252626272728080
455050606070707878
404545505055556565
38,740,340,346,746,748,948,455,751,7
YET 204YET 205YET 205YET 206YET 206YET 207YET 207YET 208YET 208
679402L679412L687702L679422L687712L679432L697842L679442L697852L
679802L679812L687782L679822L687792L679832L697922L679842L697932L
202525*3030*3535*4040*
909990
11799
130117144117
116130130148148162148176148
679102L679112L687622L2)
679122L687632L2)
679132L697762L2)
679142L697772L2)
6819626819726819726996569965682032615692600892600892
682002682012682012653442653442682052669202653472653472
Grub screws shaft locking • Closed unit
*= Version with special fixing holesSUCFL206CL/SHCFL206CL: Assembly with cylindrical head screws2) = Solid flangePackaging : 6 pieces.
Grub screws shaft locking • Open unit
Eccentric collar shaft locking • Closed unit
Eccentric collar shaft locking • Open unit
INDICATIVE GUIDE LINESFOR PRODUCT AVAILABILITIES: On request for appropriate
suitable quantities Please, contact our customer service for delivery times
On stock
t
d
2
t
d
2
1
UCFL-HCFL
B20
Grub screws or eccentric collar shaft locking
Version with bearing YAR 2F
The double ring guarantees maximum protection
against dust and non-corrosive substances.
Version with stainless steel bearing YAR 2RF
AISI 420 stainless steel bearing with 2 rubberised
rings, provides excellent seal against humidity,
steams, liquids, medium corrosive chemical agents.
Maximum load ability is inferior.
Version with bearing YAT
The rubberised ring guarantees maximum protection
against dusts.
Supports with Microban® antibacterial protection
Microban® material is effective against the most
common bacteria that may grow in foodstuff like
E. Coli, Salmonella, Listeria, S-Aureus,
Campylobacter.
Material
Polyamide PA FV guarantees maximum strength
and high-temperature resistance.
Polypropylene PP FV offers excellent resistance
to chemical agents but inferior load ability.
MaterialPAFV polyamide housing Housing in reinforced polyamide PAFV resin (black) • Ball type nickel plated brass greasing nipple • Reinforcing bushings on mounting holes and washers in stainless steel AISI 304.
PAFV polyamide housing with Microban® Housing in reinforced polyamide PAFV resin (grey) with Microban® • Bearing instainless steel AISI 420 • Ball type nickel plated brass greasing nipple • Reinforcing bushings on mounting holes and washers in stainless steel AISI 304.
PPFV polypropylene housing with Microban® Housing in reinforced polypropylene PPFV resin (white) with Microban® • Bearing in stainless steel AISI 420 • Ball type stainless steel AISI 316 greasing nipple • Reinforcing bushings on mounting holes and washers in stainless steel AISI 316.
Continuous operating temperature
in air : - 20 to + 60°C.
Maximum allowed misalignment: 2°.
Bearing
Series YAR 2F (grub screws shaft locking, chrome alloy steel, Superagriseal unitplus centrifuging ring) • Series YAR 2RF (grub screws shaft locking, stainless steel AISI 420, Superagriseal unit plus rubberised centrifuging ring) • Series YAT (grub screws shaft locking, chrome alloy steel, Superagriseal unit) • Series YET (eccentric collar shaft locking, chrome alloy steel, Superagriseal unit) • Prelubricated with lithium/ calcium grease • Can be relubricated
dyn.CN
PA FVN
PA FVN
Max.axialload
N
Shaftdia.d
mm
stat.CoN
Loads
Load coefficient
Bearing loadYAR 2F - YAT - YET
dyn.CN
Max.axialload
N
stat.CoN
Load coefficient
Bearing loadYAR 2RF
Bearing unit max. static load
*= Version with special fixing holes1) = Values are valid for applications with ? h 6 shaft tolerance. Time 0.77 values must beconsidered in all other cases.
1) 1)
1)1)
17*202525*3030*3535*4040*
9500127001400014000195001950025500255003070030700
97759775
1092510925149501495014950
14950
97759775
1150011500143751437513225
14950
1900254028002800390039005100510061406140
4750655078007800
112001120015300153001900019000
8000108001190011900162501625021600216002600026000
1600216023802380325032504320432052005200
4750655078007800
112001120015300153001900019000
Protection covers (accessories)
Closed cover
Opencover
dia.d
mm Code
464649,549,55555596265,5
464649,549,55555596265,5
Closed cover supplied with seals
Open cover supplied with seals
tmm
UCFL HCFL
17*202525*3030*3535*40 1)40 2)
17*202525*3030*3535*40 1)40 2)
Cover orange
Cover red
Microban®
Accessories
68194268194268195268195263154631546820226353963539600882
681982681982681992681992653322653322682042653342653342653352
696162681962681972681972699656996568203261569263549600892
696172682002682012682012653442653442682052669202653462653472
494949,549,555555962
71
494949,549,555555962
71SealsSeals O-Ring
1
2 *= Version with special fixing holes1) = Protection cover for bearing unit with grub screws shaft locking2) = Protection cover for bearing unit with eccentric collar shaft locking
Oval flange bearing units
Quick coupler for remote lubrication (accessory)
Code : 67843.The system foresees semirigid dia. 4 mm tubes made out ofRilsan/Nylon. The tubes are connected to the joints bymeans of rapid graft.Material nickel plated brass.Dimension : 1/8 Gas.
Accessories
UCFL-HCFL
B21
e
a
b
s
1
d
z
g
l
i
h
Df
Grub screws shaft locking • Version with bearing YAR 2F
Grub screws shaft locking • Version with stainless steel bearing YAR 2RF
Grub screws shaft locking • Version with bearing YAT
Eccentric collar shaft locking
SUCFL 203UCFL 204UCFL 205
SUCFL 205UCFL 206
SUCFL 206UCFL 207
SUCFL 207UCFL 208
SUCFL 208
17*2O2525*3030*3535*4040*
0,230,250,310,310,440,440,670,680,900,72
90909990
11799
130117144117
e
62627171858593
112102112
b
11111111111111111111
s
202022,522,5262626263026
15,215,216,816,8191919,519,52219
g i l
25,52527,527,531,531,532333633
z
31,133,536,536,541,241,245435245
21242929343439394444
116116130130148148162148176148
a
dia.d
mm
YAR 203 2FYAR 204 2F YAR 205 2FYAR 205 2FYAR 206 2FYAR 206 2FYAR 207 2FYAR 207 2FYAR 208 2FYAR 208 2F
64098269056685636879222)
684396879322)
6481716023032)
6724516023132)
Codice
UCFL 204UCFL 205
SUCFL 205UCFL 206
SUCFL 206UCFL 207
SUCFL 207UCFL 208
SUCFL 208
2O2525*3030*3535*4040*
0,250,310,310,440,440,670,680,900,72
909990
11799
130117144117
627171858593
112102112
111111111111111111
2022,522,5262626263026
15,216,816,8191919,519,52219
2527,527,531,531,532333633
33,536,536,541,241,245435245
242929343439394444
116130130148148162148176148
YAR 204 2RF YAR 205 2RFYAR 205 2RFYAR 206 2RFYAR 206 2RFYAR 207 2RFYAR 207 2RFYAR 208 2RFYAR 208 2RF
6465426465526879422)
6465626879522)
6465726023232)
6465826023332)
SUCFL 203UCFL 204UCFL 205
SUCFL 205UCFL 206
SUCFL 206UCFL 207
SUCFL 207UCFL 208
SUCFL 208
17*2O2525*3030*3535*4040*
0,210,230,310,310,390,390,620,860,860,91
90909990
11799
130117144117
62627171858593
112102112
202022,522,5262626263026
15,2 15,216,816,8202019,519,52219
25,52527,527,531,531,532333633
31,133,536,336,3414145435245
21242929343439394444
YAT 203 YAT 204 YAT 205YAT 205YAT 206YAT 206YAT 207YAT 207YAT 208YAT 208
6039636554826554726878022)
6664126878122)
6664226021832)
6664326021932)
680252680262687962680272687972680282697942680292697952
680302680312687982680322687992680332697962680342697972
11111111111111111111
116116130130148148162148176148
SHCFL 203HCFL 204HCFL 205
SHCFL 205HCFL 206
SHCFL 206HCFL 207
SHCFL 207HCFL 208
SHCFL 208
17*2O2525*3030*3535*4040*
0,260,280,350,350,460,460,790,861,050,91
90909990
11799
130117144117
62627171858593
112102112
11111111111111111111
202022,522,5262626263026
15,2 15,216,816,8202019,519,52219
11,512,714,314,315,915,917,517,51919
h
12,714,314,315,915,917,517,51919
25,52527,527,531,531,532333633
37,338,740,340,346,746,748,94955,754
2124292934343948,44451,7
116116130130148148162148176148
YET 203YET 204 YET 205YET 205YET 206YET 206YET 207YET 207YET 208YET 208
6040136798526798626878222)
6798726878322)
6798826022032)
6798926022132)
__
_
__
__
_
__
__
__
_
__
__
_
603983666562666572687842666582687852666592602223666602602233
604003680152680162687882680172687892680182602263680192602273
604033680002680012687862680022687872680032602243680042602253
604053680202680212687902680222687912680232602283680242602293
Dimensions in mm
SeriesWeight
Kg
Bore inframe
Dfmm Bearing
Housing material
Code
PolyamidePA FV
StandardFlange (black)
PolyamidePA FV with Microban®
Solid Flange(grey)
PolypropylenePP FV with Microban®
Solid Flange(white)
Series UCFLGrub screws shaft locking
Series HCFLEccentric collar shaft locking
Only for series 2061
*= Version with special fixing holesSUCFL/SHCFL: Assembly with cylindrical head screws2) = Solid flangePackaging : 6 pieces.
INDICATIVE GUIDE LINESFOR PRODUCT AVAILABILITIES: On request for appropriate
suitable quantities Please, contact our customer service for delivery times
On stock
Version with bearing YAR 2F
Version with bearing YAR 2RF
Version with bearing YAT
UCFLS/C-HCFLS/C
B22
Austenitic stainless steel surface
Waterproof housing
Grub screws or eccentric collar shaft locking
Solid flange
Patend pending design with perfect seal: rubber
makes one-body with steel and engineering plastic
bearing seat.
MaterialHousing in reinforced polyamide PAFV resin (black) • Austenitic stainless steel surface • Sealig in NBR rubber (black) • Protection cover in polypropylene PP (orange) • Seal and O-Ring in NBR rubber (black) • Ball type nickel plated brass greasing nipple.
Continuous operating temperaturein air : - 20 to + 60°C.
Maximum allowed misalignment: 2°.
Bearing
Series YAT (grub screws shaft locking) • Series YET (eccentric collar shaft locking) • Chrome alloy steel • Superagriseal unit • Prelubricated with lithium/ calcium grease • Can be relubricated
Code : 67843.The system foresees semirigid dia. 4 mm tubes made out ofRilsan/Nylon. The tubes are connected to the joints bymeans of rapid graft.Material nickel plated brass.Dimension : 1/8 Gas.
Quick coupler for remote lubrication (accessory)
dyn.CN
Bearing loadBearing unit max.
static load
Max.axialload
N
Shaftdia.d
mm
195002550030700
390051006140
stat.CoN
112001530019000
149501495014950
Loads
143751322514950
Load coefficient
PA FVN
PA FVN
3035*40*
*= Version with special fixing holes1) = Values are valid for applications with < h 6 shaft tolerance. Time 0.77 values must beconsidered in all other cases.
1)
1)
Oval flange bearing units
PATENT PENDING
UCF/C-HCF/C
B23
1
1
2
1
2
1
1
2
d
i
g
t
ae
z
Df
Dg
1
2
b
s
Closed unit
Open unit
Open unit
Series UCFLS/CGrub screws shaft locking
Series HCFLS/CEccentric collar shaft locking Closed unit
1
2
Seal.O-Ring.
Dimensions in mmBore in frame1)
Df
Series e b s g i Dg max. min.zaWeight
KgBearing
dia.d
mm
Housing material
Grub screws shaft locking • Closed unit
Grub screws shaft locking • Open unit
Eccentric collar shaft locking • Closed unit
t
Eccentric collar shaft locking • Open unit
Code
PolyamidePA FV with austenitic
stainless steelsurface
Solid FlangeCover
(orange)
*= Version with special fixing holes1) = Dimensions Df max / Df min must be respected to ensure positive retention of the seals and to allow air bleeding during lubrication.Packaging : 6 pieces.
UCFLS 206 CSUCFLS 207 CSUCFLS 208 C
3035*40*
0,650,760,86
117117117
112112112
10,510,510,5
15,515,515,5
222222
627280
607078
505565
4345,347,3
145145145
YAT 206YAT 207YAT 208
670792670802670812
UCFLS 206 CSUCFLS 207 CSUCFLS 208 C
3035*40*
0,650,760,86
117117117
112112112
10,510,510,5
15,515,515,5
222222
627280
607078
505565
4345,347,3
145145145
YAT 206YAT 207YAT 208
670822670832670842
HCFLS 206 CSHCFLS 207 CSHCFLS 208 C
3035*40*
0,720,820,92
117117117
112112112
10,510,510,5
15,515,515,5
222222
627280
607078
505565
4951,455
145145145
YET 206YET 207YET 208
670852670862670872
HCFLS 206 CSHCFLS 207 CSHCFLS 208 C
3035*40*
0,720,820,92
117117117
112112112
10,510,510,5
15,515,515,5
222222
627280
607078
505565
4951,455
65,865,865,8
65,865,865,8
65,865,865,8
65,865,865,8
145145145
YET 206YET 207YET 208
670882670892670902
635396353963539
61568261569263549
635396353963539
61568261569263549
Code
Cover orange
Spare parts
INDICATIVE GUIDE LINESFOR PRODUCT AVAILABILITIES: Please, contact our customer
service for delivery times On stock
FL
B24
Oval flange bearing units
Waterproof housing
Shaft shoulders locking
High axial load capacity.
PAFV polyamide housing
High mechanical and heat resistance. Proof to dust,
humidity, washouts, steam, average aggressive
chemical agents
PPFV polypropylene housing
Proof to highly aggressive chemical agents.
Inferior loading ability.
MaterialPAFV polyamide housing Housing in reinforced polyamide PAFV resin (black) • Seal and O-Ring in NBR rubber (black) • Ball type nickel plated brass greasing nipple • Reinforcing bushings on mounting holes and washers in stainless steel AISI 304 .
PPFV polypropylene housing Housing in reinforced polypropylene PPFV resin (black) • Seal and O-Ring in NBR rubber (black). On request supplied in Viton rubber (brown). Viton material offers high resistance to chemical agents • Ball type stainless steel AISI 316 greasing nipple • Reinforcing bushings on mounting holes and washers in stainless steel AISI 316.
Continuous operating temperature
in air : - 20 to + 60°C.
Maximum allowed misalignment: 2°.
Series 1200 self aligning ball bearing • Chrome alloy steel • Supplied without grease • To be prelubricated with lithium/calcium grease during first installation.
Bearing
Code : 67843.The system foresees semirigid dia. 4 mm tubes made out ofRilsan/Nylon. The tubes are connected to the joints bymeans of rapid graft.Material nickel plated brass.Dimension : 1/8 Gas.
Quick coupler for remote lubrication (accessory)
dyn.CN
Bearing loadBearing unit max.
static load
Bearingdia.d
mm
2025303540
Shaftdia.d
mm
2530354045
1270014300156001900019900
stat.CoN
34004000465060006950
920011500115001265012650
69006900920092009200
Loads
PA FVN
PP FVN
1150012650126501265013800
86259200920092009775
PA FVN
PP FVN
12650138009200
1380017250
5750575046006900
12650
PA FVN
PP FVN
Load coefficient
FL
B25
h
g
i
t
da dDf
Dg
e
a
b s
2 2
2
1
Dimensions in mm
FL 1204FL 1205FL 1206FL 1207FL 1208
2025303540
0,250,290,390,550,71
Series
9099
117130144
e
62718593
102
b
1111111111
s
2022,5262630
1818,51919,525
g i h
1111111116
t
35,536,5404045
4752627280
4550607078
4047526065
116130148162176
aWeight
KgBearing
Bearingdia.d
mm
2530354045
Shaftdia.damm
12041205120612071208
689766848368339648091672371
Housing material
Closed unit
FL 1204FL 1205FL 1206FL 1207FL 1208
2025303540
0,250,290,390,550,71
9099
117130144
62718593
102
1111111111
2022,5262630
1818,51919,525
1111111116
35,536,5404045
4752627280
4550607078
4047526065
116130148162176
2530354045
12041205120612071208
689866849368349648101672381
Open unit
Code
PolyamidePA FV
StandardFlange (black)
PolypropylenePP FV
StandardFlange(black)
Bore in frame1)
Df
Dg max. min.
1) = Dimensions Df max / Df min must be respected to ensure positive retention of the seals and to allow air bleeding during lubrication.Packaging : 6 pieces.
1)
680352680362680372680382680392
680402680412680422680432680442
INDICATIVE GUIDE LINESFOR PRODUCT AVAILABILITIES: On stock
Seal2
Closed unit
Open unit
1 Only for series 1206
On request for appropriate suitable quantities
UCP/C-HCP/C
B26
Waterproof housing
Grub screws or eccentric collar shaft locking
PAFV polyamide housing
High mechanical and heat resistance. Proof to dust,
humidity, washouts, steam, average aggressive
chemical agents.
PPFV polypropylene housing
Proof to highly aggressive chemical agents.
Inferior loading ability.
Supports with Microban® antibacterial protection
Microban® material is effective against the most
common bacteria that may grow in foodstuff like
E. Coli, Salmonella, Listeria, S-Aureus, Campylobacter.
Pillow block type bearing units
MaterialPAFV polyamide housing Housing in reinforced polyamide PAFV resin (black) • Protection cover in polypropylene PP (orange) • Seal and O-Ring in NBR rubber (black) • Ball type nickel plated brass greasing nipple • Reinforcing bushings on mounting holes and washers in stainless steel AISI 304 • Stainless steel AISI 303 safety ring • Bottom seal in PVC (black).
PAFV polyamide housing with Microban® Housing in reinforced polyamide PAFV resin (grey) with Microban® • Protection cover in polypropylene PP (red) with Microban® • Seal and O-Ring in NBR rubber (black) • Ball type nickel plated brass greasing nipple • Reinforcing bushings on mounting holes and washers in stainless steel AISI 304 • Stainless steel AISI 303 safety ring • Bottom seal in PVC (black).
PPFV polypropylene housing with Microban® Housing in reinforced polypropylene PPFV resin (white) with Microban® • Protection cover in polypropylene PP (red) with Microban® • Seal and O-Ring in NBR rubber (black). On request supplied in Viton rubber (brown). Viton material offers high resistance to chemical agents • Ball type stainless steel AISI 316 greasing nipple • Reinforcing bushings on mounting holes and washers in stainless steel AISI 316 • Stainless steel AISI 303 safety ring • Bottom seal in PVC (black).
Continuous operating temperature
in air : - 20 to + 60°C.
Maximum allowed misalignment: 2°.
Bearing
Series YAT (grub screws shaft locking) • Series YET (eccentric collar shaft locking) • Chrome alloy steel • Superagriseal unit • Prelubricated with lithium/ calcium grease • Can be relubricated
Code : 67843.The system foresees semirigid dia. 4 mm tubes made out ofRilsan/Nylon. The tubes are connected to the joints bymeans of rapid graft.Material nickel plated brass.Dimension : 1/8 Gas.
Quick coupler for remote lubrication (accessory)
dyn.CN
Bearing loadBearing unit max.
static load
Max.axialload
N
Shaftdia.d
mm
2025303540
1270014000195002550030700
25402800390051006140
stat.CoN
65507800
112001530019000
2070020700287503105031050
57505750805086258625
Loads
PA FVN
PP FVN
46006900805092009200
20702070230025302530
PA FVN
PP FVN
575069009200
1150011500
34503450460048304830
PA FVN
PP FVN
Load coefficient
1) = Values are valid for applications with < h 6 shaft tolerance. Time 0,77 values must beconsidered in all other cases.
1)1)
UCP/C-HCP/C
B27
UCP 204 CUCP 205 CUCP 206 CUCP 207 CUCP 208 C
2025303540
0,270,330,490,640,84
Series
96106121126136
e
33,336,542,947,650
h
67758898
102
b
1212141414
1010101010
s1 s2
18,918,819,721,325
i z
37,238,340,744,650,3
g
1717202020
w
3034,53638,638,6
128140163167185
a
dia.d
mm
YAT 204YAT 205YAT 206YAT 207YAT 208
Code
UCP 204 CUCP 205 CUCP 206 CUCP 207 CUCP 208 C
2025303540
HCP 204 CHCP 205 CHCP 206 CHCP 207 CHCP 208 C
2025303540
HCP 204 CHCP 205 CHCP 206 CHCP 207 CHCP 208 C
2025303540
t
49,751,5556166,5
0,270,330,490,640,84
96106121126136
33,336,542,947,650
67758898
102
1212141414
1010101010
18,918,819,721,325
37,238,340,744,650,3
1717202020
3034,53638,638,6
128140163167185
YAT 204YAT 205YAT 206YAT 207YAT 208
49,751,5556166,5
0,320,370,560,821,03
96106121126136
33,336,542,947,650
67758898
102
1212141414
1010101010
18,918,819,721,325
42,442,346,450,757,7
1717202020
3034,53638,638,6
128140163167185
YET 204YET 205YET 206YET 207YET 208
5251,5556172
0,320,370,560,821,03
96106121126136
33,336,542,947,650
67758898
102
1212141414
1010101010
18,918,819,721,325
42,442,346,450,757,7
1717202020
3034,53638,638,6
128140163167185
YET 204YET 205YET 206YET 207YET 208
5251,5556172
651452651462651472651482651492
678352678362678372678382678392
682941646511646531646551683041
651552651562651572651582651592
678402678412678422678432678442
682931646521646541646561683031
678052678062678072678082678092
678452678462678472678482678492
677952677962677972677982677992
678102678112678122678132678142
678502678512678522678532678542
678002678012678022678032678042
Code
Coverorange
Coverred
Microban®
Spare parts
6819426819526315468202263539
681982681992653322682042653342
6819626819726996568203263549
682002682012653442682052653462
68194268195263154682022600882
681982681992653322682042653352
68196268197269965682032600892
682002682012653442682052653472
Dimensions in mm WeightKgBearing
Packaging : 6 pieces.
Housing material
Grub screws shaft locking • Closed unit
PolyamidePA FV with Microban®
Flange (grey)Cover (red)
PolypropylenePP FV with Microban®
Flange (white)Cover (red)
PolyamidePA FVFlange (black)Cover
(orange)
Grub screws shaft locking • Open unit
Eccentric collar shaft locking • Closed unit
Eccentric collar shaft locking • Open unit
Code
2025303540
Safety ring600982646281646291646301601052
600982646281646291646301601052
600982646281646291646301601052
2025303540
Seal692391646251646261646271692401
692391646251646261646271692401
692391646251646261646271692401
Housting metal
dia.d
mm
Spare parts
Safety ring
Seal
Seal.O-Ring.Safety ring.Bottom seal.
1
2
3
4
Closed unit
Open unit
Closed unit
Series UCP/CGrub screws shaft locking
Series HCP/CEccentric collar shaft locking
Open unit
INDICATIVE GUIDE LINESFOR PRODUCT AVAILABILITIES: On request for appropriate
suitable quantities Please, contact our customer service for delivery times
On stock
PolyamidePA FV with Microban®
Flange (grey)Cover (red)
PolypropylenePP FV with Microban®
Flange (white)Cover (red)
PolyamidePA FVFlange (black)Cover
(orange)
1
3
1
3
e
a
gh
b
s1
s2
dw
zt
i
2 2
1 1
3
1
3
2 2
1
4
d
t
d
2
t
2
1
UCP-HCP
B28
Pillow block type bearing units
Grub screws or eccentric collar shaft lockingVersion with bearing YAR 2FThe double ring guarantees maximum protection against dust and non-corrosive substances.Version with stainless steel bearing YAR 2RFAISI 420 stainless steel bearing with 2 rubberised rings, provides excellent seal against humidity, steams, liquids, medium corrosive chemical agents. Maximum load ability is inferior.Version with bearing YATThe rubberised ring guarantees maximum protection against dusts.Supports with Microban® antibacterial protection Microban® material is effective against the most common bacteria that may grow in foodstuff like E. Coli, Salmonella, Listeria, S-Aureus, Campylobacter.MaterialPolyamide PA FV guarantees maximum strength and high-temperature resistance. Polypropylene PP FV offers excellent resistance to chemical agents but inferior load ability.
MaterialPA FV Polyamide housingHousing in reinforced polyamide PAFV resin (black) • Ball type nickel plated brass greasing nipple • Reinforcing bushings on mounting holes and washers in stainless steel AISI 304 • Bottom seal in PVC (black).
PA FV Polyamide housing with Microban® Housing in reinforced polyamide PAFV resin (grey) with Microban® • Ball type nickel plated brass greasing nipple • Reinforcing bushings on mounting holes and washers in stainless steel AISI 304 • Bottom seal in PVC (black).
PPFV polypropylene housing with Microban® Housing in reinforced polypropylene PPFV resin (white) with Microban® • Ball type stainless steel AISI 316 greasing nipple • Reinforcing bushings on mounting holes and washers in stainless steel AISI 316 • Bottom seal in PVC (black).
Maximum allowed misalignment: 2°.
Bearing
Series YAR 2F (grub screws shaft locking, chrome alloy steel, Superagriseal unitplus centrifuging ring) • Series YAR 2RF (grub screws shaft locking, stainless steel AISI 420, Superagriseal unit plus rubberised centrifuging ring) • Series YAT (grub screws shaft locking, chrome alloy steel, Superagriseal unit) • Series YET (eccentric collar shaft locking, chrome alloy steel, Superagriseal unit) • Prelubricated with lithium/ calcium grease • Can be relubricated
Continuous operating temperature
in air : - 20 to + 60°C.
Quick coupler for remote lubrication (accessory)
Code : 67843.The system foresees semirigid dia. 4 mm tubes made out ofRilsan/Nylon. The tubes are connected to the joints bymeans of rapid graft.Material nickel plated brass.Dimension : 1/8 Gas.
Bearing unit max. static load
1) = Values are valid for applications with < h 6 shaft tolerance. Time 0,77 values must beconsidered in all other cases.
dyn.CN
Max.axialload
N
Shaftdia.d
mm
stat.CoN
Bearing load
Load coefficient
YAR 2F - YAT - YET
dyn.CN
Max.axialload
N
stat.CoN
Load coefficient
YAR 2RF
1) 1)1)1)
2025303540
1270014000195002550030700
25402800390051006140
65507800
112001530019000
1080011900162502160026000
21602380325043205200
65507800
112001530019000
dia.d
mm Codice
49,751,5556166,5
49,751,5556166,5
tmm
UCP HCP
2025303540 1)40 2)
2025303540 1)40 2)
6819426819526315468202263539600882
681982681992653322682042653342653352
6819626819726996568203263549600892
682002682012653442682052653462653472
5251,55561
72
5251,55561
72
1
2
Accessories
Protection coveZuurs (accessories)
Closed cover
Opencover
dmm Code
Closed cover supplied with seals
Open cover supplied with seals
Cover orange
Cover red
Microban®
Accessories
SealsSeals O-Ring
1
21) = Protection cover for bearing unit with grub screws shaft locking2) = Protection cover for bearing unit with eccentric collar shaft locking
Shaftdia.d
mm
2025303540
2070020700287503105031050
57505750805086258625
PA FVN
PP FVN
46006900805092009200
20702070230025302530
PA FVN
PP FVN
575069009200
1150011500
34503450460048304830
PA FVN
PP FVN
UCP-HCP
B29
Dimensions in mm WeightKgBearing
Housing material
Grub screws shaft locking • Version with bearing YAR 2F
PolyamidePA FVFlange (black)
PolyamidePA FV with Microban®
Flange(grey)
PolypropylenePP FV with Microban®
Flange(white)
Grub screws shaft locking • Version with stainless steel bearing YAR 2RF
Grub screws shaft locking • Version with bearing YAT
Packaging : 6 pieces.
Eccentric collar shaft locking
UCP 204UCP 205UCP 206UCP 207UCP 208
2025303540
0,270,330,490,640,84
Series
96106121126136
e
33,336,542,947,650
h
67758898
102
b
1212141414
1010101010
s1 s2 g
1717202020
w
3034,53638,638,6
i
18,918,819,721,325
z
37,238,641,946,755,2
128140163167185
a
dia.d
mm
YAR 204 2FYAR 205 2FYAR 206 2FYAR 207 2FYAR 208 2F
682921648781648791648801683021
Code
UCP 204UCP 205UCP 206UCP 207UCP 208
2025303540
0,270,330,490,640,84
96106121126136
33,336,542,947,650
67758898
102
1212141414
1010101010
1717202020
3034,53638,638,6
18,918,819,721,325
37,238,641,946,755,2
128140163167185
YAR 204 2RFYAR 205 2RFYAR 206 2RFYAR 207 2RFYAR 208 2RF
646492646502646512646522646532
678952678962678972678982678992
679002679012679022679032679042
UCP 204UCP 205UCP 206UCP 207UCP 208
2025303540
0,240,300,440,540,72
96106121126136
33,336,542,947,650
67758898
102
1212141414
1010101010
1717202020
3034,53638,638,6
18,918,819,721,325
37,238,340,744,650,3
128140163167185
YAT 204YAT 205YAT 206YAT 207YAT 208
678552678562678572678582678592
HCP 204HCP 205HCP 206HCP 207HCP 208
2025303540
0,290,340,510,720,91
96106121126136
33,336,542,947,650
67758898
102
1212141414
1010101010
1717202020
3034,53638,638,6
18,918,819,721,325
42,442,346,450,757,7
128140163167185
YET 204YET 205YET 206YET 207YET 208
678602678612678622678632678642
678652678662678672678682678692
678702678712678722678732678742
678852678862678872678882678892
678902678912678922678932678942
Spare parts
2025303540
Seal692391646251646261646271692401
692391646251646261646271692401
692391646251646261646271692401
Housting material
Codedia.d
mmSeal
Series UCPGrub screws shaft locking
Series HCPEccentric collar shaft locking Version with
bearing YAR 2F
Version with stainless steel bearing YAR 2RF
Version withbearing YAT
Bottom seal.1
PolyamidePA FVFlange (black)
PolyamidePA FV with Microban®
Flange(grey)
PolypropylenePP FV with Microban®
Flange(white)
INDICATIVE GUIDE LINESFOR PRODUCT AVAILABILITIES: On request for appropriate
suitable quantities Please, contact our customer service for delivery times
On stock
d
w
z
a
e
gh
b
s1
s2
1w
i
UCPA/C-HCPA/C
B30
TM
antibacterial protection
®
Compact pillow block
Material
Continuous operating temperature
PAFV polyamide housing Housing in reinforced polyamide PAFV resin (black) • Protection cover in polypropylene PP (orange) • Seal and O-Ring in NBR rubber (black) • Ball type nickel plated brass greasing nipple • Nickel plated brass threaded bushings.
PAFV polyamide housing with Microban® Housing in reinforced polyamide PAFV resin (grey) with Microban® • Protection cover in polypropylene PP (red) with Microban® • Seal and O-Ring in NBR rubber (black) • Ball type nickel plated brass greasing nipple • Nickel plated brassthreaded bushings.
PPFV polypropylene housing with Microban® Housing in reinforced polypropylene PPFV resin (white) with Microban® • Protection cover in polypropylene PP (red) with Microban® • Seal and O-Ring in NBR rubber (black). On request supplied in Viton rubber (brown). Viton material offers high resistance to chemical agents • Ball type stainless steel AISI 316 greasing nipple • Nickel plated brass threaded bushings.
in air : - 20 to + 60°C.
Bearing
Series YAT (grub screws shaft locking) • Series YET (eccentric collar shaft locking) • Chrome alloy steel • Superagriseal unit • Prelubricated with lithium/ calcium grease • Can be relubricated
Maximum allowed misalignment: 2°.
Waterproof housing
Grub screws or eccentric collar shaft locking
PAFV polyamide housing
High mechanical and heat resistance. Proof to dust,
humidity, washouts, steam, average aggressive
chemical agents.
PPFV polypropylene housing
Proof to highly aggressive chemical agents.
Inferior loading ability.
Supports with Microban® antibacterial protection
Microban® material is effective against the most
common bacteria that may grow in foodstuff like
E. Coli, Salmonella, Listeria, S-Aureus, Campylobacter.
dyn.CN
Max axial load
N
shaftdia.d
mm
172025
95001270014000
190025402800
stat.CoN
475065507800
Bearing load
Load coefficient
1) = Values are valid for applications with < h 6 shaft tolerance. Time 0.77 values must beconsidered in all other cases.
1)1)
shaftdia.d
mm
172025
80006750
10500
375043005200
PA FVN
PP FVN
250025003000
150017001700
PA FVN
PP FVN
150023002600
110012001750
PA FVN
PP FVN
125011001100
1000750900
PA FVN
PP FVN
Loads
UCPA/C-HCPA/C
B31
1
2
11
2
hb
ea
s
13
1
2
1
d
wt
i
z
l
2
1
Closedunit
Series HCPA/C - Eccentric collar shaft locking
Openunit
SealO-Ring
1
2
Openunit
Closedunit
Series UCPA/C - Grub screws shaft locking
Dimensions in mm
UCPA 203 CUCPA 204 CUCPA 205 C
172025
0,220,250,29
Series
4750,850,8
e
30,233,236,5
h
626572
b
M8M8M10
282830
s w z
31,133,536,3
i
15,215,216,8
l
101012
707075
aWeight
KgBearing
dia.d
mm
YAT 203YAT 204YAT 205
Housing material
Grub screws shaft locking • Closed unit
Code
PolyamidePA FV with Microban®
Flange (grey)Cover (red)
PolypropylenePP FV with Microban®
Flange (white)Cover (red)
Packaging : 6 pieces.
PolyamidePA FVFlange (black)Cover
(orange)
UCPA 203 CUCPA 204 CUCPA 205 C
172025
Grub screws shaft locking • Open unit
HCPA 203 CHCPA 204 CHCPA 205 C
172025
Eccentric collar shaft locking • Closed unit
HCPA 203 CHCPA 204 CHCPA 204 C
172025
t
494952
0,220,250,29
4750,850,8
30,233,236,5
626572
M8M8M10
282830
31,133,536,3
15,215,216,8
101012
707075
YAT 203YAT 204YAT 205
494952
0,240,270,34
4750,850,8
30,233,236,5
626572
M8M8M10
282830
37,338,740,3
15,215,216,8
101012
707075
YET 203YET 204YET 205
494952
0,240,270,34
4750,850,8
30,233,236,5
626572
M8M8M10
282830
37,338,740,3
15,215,216,8
101012
707075
YET 203YET 204YET 205
494952
Eccentric collar shaft locking • Open unit
696302696312696322
696542696552696562
696182696192696202
696332696342696352
696572696582696592
696212696222696232
696362696372696382
696602696612696622
696242696252696262
696392696402696412
696632696642696652
696272696282696292
Code
Cover orange
Cover red
Microban®
Spare parts
681942681942681952
681982681982681992
696162681962681972
696172682002682012
681942681942681952
681982681982681992
696162681962681972
696172682002682012
INDICATIVE GUIDE LINESFOR PRODUCT AVAILABILITIES: On request for appropriate
suitable quantities Please, contact our customer service for delivery times
On stock
d
t
2
d
1
t
2
UCPA-HCPA
B32
TM
antibacterial protection
®
Compact pillow block
Protection covers (accessories)
Closed cover
Opencover
SealO-Ring
1
2
Material
Continuous operating temperature
PA FV Polyamide housingHousing in reinforced polyamide PAFV resin (black) • Ball type nickel plated brass greasing nipple • Nickel plated brass threaded bushings.
PA FV Polyamide housing with Microban® Housing in reinforced polyamide PAFV resin (grey) with Microban® • Ball type nickel plated brass greasing nipple • Nickel plated brass threaded bushings.
PPFV polypropylene housing with Microban® Housing in reinforced polypropylene PPFV resin (white) with Microban® • Ball type stainless steel AISI 316 greasing nipple • Nickel plated brass threaded bushings.
in air : - 20 to + 60°C.
Maximum allowed misalignment: 2°.
Bearing
Series YAR 2F (grub screws shaft locking, chrome alloy steel, Superagriseal unitplus centrifuging ring) • Series YAR 2RF (grub screws shaft locking, stainless steel AISI 420, Superagriseal unit plus rubberised centrifuging ring) • Series YAT (grub screws shaft locking, chrome alloy steel, Superagriseal unit) • Series YET (eccentric collar shaft locking, chrome alloy steel, Superagriseal unit) • Prelubricated with lithium/ calcium grease • Can be relubricated
Version with bearing YAR 2FThe double ring guarantees maximum protection against dust and non-corrosive substances.Version with stainless steel bearing YAR 2RFAISI 420 stainless steel bearing with 2 rubberised rings, provides excellent seal against humidity, steams, liquids, medium corrosive chemical agents. Maximum load ability is inferior.Version with bearing YATThe rubberised ring guarantees maximum protection against dusts.Supports with Microban® antibacterial protection Microban® material is effective against the most common bacteria that may grow in foodstuff like E. Coli, Salmonella, Listeria, S-Aureus, Campylobacter.MaterialPolyamide PA FV guarantees maximum strength and high-temperature resistance. Polypropylene PP FV offers excellent resistance to chemical agents but inferior load ability.
dyn.CN
Max.axialload
N
dia.albero
dmm
172025
95001270014000
190025402800
stat.CoN
475065507800
Bearing load
Load coefficient
YAR 2F - YAT - YET
dyn.CN
Max.axialload
N
80001080011900
160021602380
stat.CoN
475065507800
Load coefficient
YAR 2RF
1) = Values are valid for applications with < h 6 shaft tolerance. Time 0.77 values must beconsidered in all other cases.
1) 1)1)1)
Accessories
dia.d
mm Code
Closed cover supplied with seals
Open cover supplied with seals
tmm
Cover orange
Cover red
Microban®
Accessories
172025
494952
494952
681982681982681992
681942681942681952
172025
696172682002682012
696162681962681972
shaftdia.d
mm
172025
80006750
10500
375043005200
Bearing unit max. static load
PA FVN
PP FVN
250025003000
150017001700
PA FVN
PP FVN
150023002600
110012001750
PA FVN
PP FVN
125011001100
1000750900
PA FVN
PP FVN
UCPA-HCPA
B33
13
hb
ea
s
z
l
i i
ld
wp
d
wp
z
Dimensions in mm
UCPA 203UCPA 204UCPA 205
172025
0,210,260,30
Series
4750,850,8
e
30,233,236,5
h
626572
b
M8M8M10
282830
s w z
31,133,536,5
i
15,215,216,8
l
101012
707075
aWeight
KgBearing
dia.d
mm
YAR 203 FYAR 204 FYAR 205 F
Housing material
Grub screws shaft locking • Version with bearing YAR 2F
Code
PolyamidePA FV with Microban®
Flange(grey)
PolypropylenePP FV with Microban®
Flange(white)
Packaging : 6 pieces.
PolyamidePA FVFlange (black)
UCPA 204UCPA 205
2025
Grub screws shaft locking • Version with stainless steel bearing YAR 2RF
UCPA 203UCPA 204UCPA 205
172025
Grub screws shaft locking • Version with bearing YAT
HCPA 203HCPA 204HCPA 204
172025
P
313132
0,260,30
50,850,8
33,236,5
6572
M8M10
2830
33,536,5
15,216,8
1012
7075
YAR 204 RFYAR 205 RF
3132
0,210,240,28
4750,850,8
30,233,236,5
626572
M8M8M10
282830
31,133,536,5
15,215,216,8
101012
707075
YAT 203YAT 204YAT 205
313132
0,230,260,33
4750,850,8
30,233,236,5
626572
M8M8M10
282830
37,338,740,3
15,215,216,8
101012
707075
YET 203YET 204YET 205
313132
Eccentric collar shaft locking
---
696902696912696922
696972696982
697002697012
696942696952
696662696672696682
---
696692696702696712
696722696732696742
696842696852696862
696752696762696772
696872696882696892
INDICATIVE GUIDE LINESFOR PRODUCT AVAILABILITIES: On request for appropriate
suitable quantities Please, contact our customer service for delivery times
On stock
Series HCPA - Eccentric collarshaft lockingVersion with
stainless steel bearing YAR 2RF
Version withbearing YAT
Series UCPA - Grub screws shaft lockingVersion withbearing YAR 2F
UCFB/C HCFB/C
B34
Side flange bearing units
Waterproof housing
Grub screws or eccentric collar shaft locking
PAFV polyamide housing
High mechanical and heat resistance. Proof to dust,
humidity, washouts, steam, average aggressive
chemical agents.
PPFV polypropylene housing
Proof to highly aggressive chemical agents.
Inferior loading ability.
Solid flange bearings
Closed surface structure, ideal for sanification.
Supports with Microban® antibacterial protection
Microban® material is effective against the most
common bacteria that may grow in foodstuff like
E. Coli, Salmonella, Listeria, S-Aureus, Campylobacter.
MaterialPAFV polyamide housing Housing in reinforced polyamide PAFV resin (black) • Protection cover in polypropylene PP (orange) • Seal and O-Ring in NBR rubber (black) • Ball type nickel plated brass greasing nipple • Reinforcing bushings on mounting holes in stainless steel AISI 304.
PAFV polyamide housing with Microban® Housing in reinforced polyamide PAFV resin (grey) with Microban® • Protection cover in polypropylene PP (red) with Microban® • Seal and O-Ring in NBR rubber (black) • Ball type nickel plated brass greasing nipple • Reinforcing bushings on mounting holes in stainless steel AISI 304.
PPFV polypropylene housing with Microban® Housing in reinforced polypropylene PPFV resin (white) with Microban® • Protection cover in polypropylene PP (red) with Microban® • Seal and O-Ring in NBR rubber (black). On request supplied in Viton rubber (brown). Viton material offers high resistance to chemical agents • Ball type stainless steel AISI 316 greasing nipple • Reinforcing bushings on mounting holes in stainless steel AISI 316.
Continuous operating temperaturein air : - 20 to + 60°C.
Maximum allowed misalignment: 2°.
Bearing
Series YAT (grub screws shaft locking) • Series YET (eccentric collar shaft locking) • Chrome alloy steel • Superagriseal unit • Prelubricated with lithium/ calcium grease • Can be relubricated
dyn.CN
Bearing loadBearing unit max.
static load
Max.axialload
N
Shaftdia.d
mm
stat.CoN
Loads
PA FVN
PP FVN
PA FVN
PP FVN
Load coefficient
1) = Values are valid for applications with < h 6 shaft tolerance. Time 0.77 values must beconsidered in all other cases.
1)1)
2025303540
1270014000195002550030700
25402800390051006140
65507800
112001530019000
30003500350040005200
17002000200025003000
10001000100010001000
650650650650650
UCFB/C HCFB/C
B35
e
f10
p
s12
15
17,2e
a
cf
p
sb
zt
g
dDg
i
2
Df
1
1
21
21
1
21
Grub screws shaft locking • Closed unit
Grub screws shaft locking • Open unit
Eccentric collar shaft locking • Closed unit
Eccentric collar shaft locking • Open unit
Housing material
PolyamidePA FVSolid
Flange (black)Cover
(orange)
PolyamidePA FV with Microban®
Solid Flange(grey)Cover (red)
PolypropylenePP FV with Microban®
Solid Flange(white)Cover (red)
Dimensions in mm WeightKgBearing
Bore in frame2)
Df
2) = Dimensions Df max / Df min must be respected to ensure positive retention of the seals and to allow air bleeding during lubrication.Packaging : 6 pieces.
UCFB 204 CUCFB 205 CUCFB 206 CUCFB 207 CUCFB 208 C
2025303540
0,260,320,470,640,84
Series
124,2124,2138,6154,5164
a
89,889,897,9
107,6 114
c
464652,460,360
p
41,341,347,650,850
28,628,631,731,731
e f
4752627280
Dgs
1111111313
g
14141415
i
16,417,82019,522
z
34,737,342,545,747,5
t
4952555966,5
68,868,881,393,7100
b
dia.d
mm
YAT 204YAT 205YAT 206YAT 207YAT 208
601133656542656562656582601143
601213663312663322663332601223
601373677832677842677852601383
UCFB 204 CUCFB 205 CUCFB 206 CUCFB 207 CUCFB 208 C
2025303540
0,260,320,470,640,84
124,2124,2138,6154,5164
89,889,897,9107,6114
464652,460,360
41,341,347,650,850
28,628,631,731,731
4752627280
1111111313
14141415
16,417,82019,522
34,737,342,545,747,5
4952555966,5
68,868,881,393,7100
YAT 204YAT 205YAT 206YAT 207YAT 208
601153656552656572656592601163
601233663342663352663362601243
601393677862677872677882601403
HCFB 204 CHCFB 205 CHCFB 206 CHCFB 207 CHCFB 208 C
2025303540
0,290,350,500,670,92
124,2124,2138,6154,5164
89,889,897,9
107,6114
464652,460,360
41,341,347,650,850
28,628,631,731,731
4752627280
1111111313
14141415
16,417,82019,522
4041,346,74955
49576064,572
68,868,881,393,7100
YET 204YET 205YET 206YET 207YET 208
601173663252663262663272601183
601253663372663382663392601263
601413677892677902677912601423
HCFB 204 CHCFB 205 CHCFB 206 CHCFB 207 CHCFB 208 C
2025303540
0,290,350,500,670,92
124,2124,2138,6154,5164
89,889,897,9
107,6114
464652,460,360
41,341,347,650,850
28,628,631,731,731
4752627280
4550607078
4550607078
4550607078
4550607078
4045505565
4045505565
4045505565
4045505565
1111111313
14141415
16,417,82019,522
4041,346,74955
49576064,572
68,868,881,393,7100
YET 204YET 205YET 206YET 207YET 208
601193663282663292663302601203
601273663402663412663422601283
601433677922677932677942601443
Code max min.
Coverorange
CoverRed
Microban®
Spare parts
Code
68194268195263154682022600882
681982681992653322682042653352
68196268197269965682032600892
682002682012653442682052653472
68194268195263154682022600882
681982681992653322682042653352
68196268197269965682032600892
682002682012653442682052653472
Closed unit
Open unit
Closed unit
Series UCFB/CGrub screws shaft locking
Series HCFB/CEccentric collar shaft locking
Open unit
2
1 Seal.O-Ring.
Only for versiondia Ø= 40mm
INDICATIVE GUIDE LINESFOR PRODUCT AVAILABILITIES: On request for appropriate
suitable quantities Please, contact our customer service for delivery times
On stock
t
d
2
t
d
2
1
UCFB-HCFB
B36
Grub screws or eccentric collar shaft locking
Version with bearing YAR 2F
The double ring guarantees maximum protection
against dust and non-corrosive substances.
Version with stainless steel bearing YAR 2RF
AISI 420 stainless steel bearing with 2 rubberised
rings, provides excellent seal against humidity,
steams, liquids, medium corrosive chemical agents.
Maximum load ability is inferior.
Version with bearing YAT
The rubberised ring guarantees maximum protection
against dusts.
Supports with Microban® antibacterial protection
Microban® material is effective against the most
common bacteria that may grow in foodstuff like
E. Coli, Salmonella, Listeria, S-Aureus, Campylobacter.
Material
Polyamide PA FV guarantees maximum strength
and high-temperature resistance.
Polypropylene PP FV offers excellent resistance
to chemical agents but inferior load ability.
MaterialPAFV polyamide housing Housing in reinforced polyamide PAFV resin (black) • Ball type nickel plated brass greasing nipple • Reinforcing bushings on mounting holes in stainless steel AISI 304.
PAFV polyamide housing with Microban® Housing in reinforced polyamide PAFV resin (grey) with Microban® • Bearing instainless steel AISI 420 • Ball type nickel plated brass greasing nipple • Reinforcing bushings on mounting holes in stainless steel AISI 304.
PPFV polypropylene housing with Microban® Housing in reinforced polypropylene PPFV resin (white) with Microban® • Bearing in stainless steel AISI 420 • Ball type stainless steel AISI 316 greasing nipple • Reinforcing bushings on mounting holes in stainless steel AISI 316.
Continuous operating temperaturein air : - 20 to + 60°C.
Maximum allowed misalignment: 2°
Bearing
Series YAR 2F (grub screws shaft locking, chrome alloy steel, Superagriseal unitplus centrifuging ring) • Series YAR 2RF (grub screws shaft locking, stainless steel AISI 420, Superagriseal unit plus rubberised centrifuging ring) • Series YAT (grub screws shaft locking, chrome alloy steel, Superagriseal unit) • Series YET (eccentric collar shaft locking, chrome alloy steel, Superagriseal unit) • Prelubricated with lithium/ calcium grease • Can be relubricated
dyn.CN
PA FVN
PP FVN
PP FVN
PA FVN
Max.axialload
N
Shaftdia.d
mm
stat.CoN
Loads
Loadcoefficient
Bearing loadYAR 2F - YAT - YET
dyn.CN
Max.axialload
N
stat.CoN
Loadcoefficient
Bearing loadYAR 2RF
Bearing unit max. static load
1) = Values are valid for applications with < h 6 shaft tolerance. Time 0,77 values must beconsidered in all other cases.
1)
1) 1)1)
2025303540
1270014000195002550030700
25402800390051006140
65507800
112001530019000
1080011900162502160026000
21602380325043205200
65507800
112001530019000
30003500350040005200
10001000100010001000
650650650650650
diad
mm Code
4952555966,5
4952555966,5
tmm
UCFB HCFB
2025303540
2025303540
68194268195263154682022600882
681982681992653322682042653352
68196268197269965682032600892
682002682012653442682052653472
49576064,572
49576064,572
Side flange bearing units
Accessories
Protection covers (accessories)
Closed cover
Opencover
Closed cover supplied with seals
Open cover supplied with seals
Cover orange
Abdichtkappe rot
Microban®
Accessories
SealsSeals O-Ring
1
2
17002000200025003000
UCFB-HCFB
B37
Housing material
Grub screws shaft locking • Version with bearing YAR 2F
Grub screws shaft locking • Version with stainless steel bearing YAR 2RF
Grub screws shaft locking • Version with bearing YAT
Eccentric collar shaft locking
PolyamidePA FVSolid
Flange (black)
PolyamidePA FV with Microban®
Solid Flange(grey)
PolypropylenePP FV with Microban®
Solid Flange(white)
Packaging : 6 pieces.
Dimensions in mm
UCFB 204UCFB 205UCFB 206UCFB 207UCFB 208
2025303540
0,260,330,500,720,84
Series
124,2124,2138,6154,5164
a
89,889,897,9107,6114
c
464652,460,360
p
41,341,347,650,850
28,628,631,731,731
e f s
1111111313
g
14141415
i
16,417,82019,522
l
28,32931,53236
z
34,737,342,545,747,5
68,868,881,393,7100
b
dia.d
mm
YAR 204 2F YAR 205 2FYAR 206 2FYAR 207 2FYAR 208 2F
601613663912663922663932601623
UCFB 204UCFB 205UCFB 206UCFB 207UCFB 208
2025303540
0,260,330,500,720,84
124,2124,2138,6154,5164
89,889,897,9107,6114
464652,460,360
41,341,347,650,850
28,628,631,731,731
1111111313
14141415
16,417,82019,522
28,32931,53236
34,737,342,545,747,5
68,868,881,393,7100
YAR 204 2RF YAR 205 2RFYAR 206 2RFYAR 207 2RFYAR 208 2RF
601633663942663952663962601643
601653665952665962665972601653
601673665982665992 666002601683
UCFB 204UCFB 205UCFB 206UCFB 207UCFB 208
2025303540
0,260,300,450,620,84
124,2124,2138,6154,5164
89,889,897,9107,6114
464652,460,360
41,341,347,650,850
28,628,631,731,731
1111111313
14141415
16,417,82019,522
28,32931,53236
34,737,342,545,747,5
68,868,881,393,7100
YAT 204YAT 205YAT 206YAT 207YAT 208
601453663672663682663692601463
HCFB 204HCFB 205HCFB 206HCFB 207HCFB 208
2025303540
0,290,330,480,650,92
124,2124,2138,6154,5164
89,889,897,9107,6114
464652,460,360
41,341,347,650,850
28,628,631,731,731
1111111313
14141415
2429343944
2429343944
2429343944
2429343944
16,417,82019,522
h
12,714,315,917,519
12,714,315,917,519
28,33436,53836
4041,346,74955
68,868,881,393,7100
YET 204YET 205YET 206YET 207YET 208
601473663702663712663722601483
____
_
____
_
601493663732663742663752601503
601573663852663862 663872601583
_
601513663762663772663782601523
601593663882663892 663902601603
_
Code
Version withbearing YAR 2F
Version with stainless steel bearing YAR 2RF
Version withbearing YAT
Series UCFBGrub screws shaft locking
Series HCFBEccentric collar shaft locking
INDICATIVE GUIDE LINESFOR PRODUCT AVAILABILITIES: On request for appropriate
suitable quantities Please, contact our customer service for delivery times
On stock
Bore in frame
Dfmm
WeightKgBearing
Only for versiondia Ø= 40mm
b
e
a
cf
p
s
z
i
l
g
d
h
Df
e
f10
p
s
12
15
17,2
UCT/C-HCT/C
B38
Waterproof housing
Grub screws or eccentric collar shaft locking
PAFV polyamide housing
High mechanical and heat resistance. Proof to dust,
humidity, washouts, steam, average aggressive
chemical agents.
PPFV polypropylene housing
Proof to highly aggressive chemical agents.
Inferior loading ability.
Supports with Microban® antibacterial protection
Microban® material is effective against the most
common bacteria that may grow in foodstuff like
E. Coli, Salmonella, Listeria, S-Aureus, Campylobacter.
MaterialPAFV polyamide housing Housing in reinforced polyamide PAFV resin (black) • Protection cover in polypropylene PP (orange) • Seal and O-Ring in NBR rubber (black) • Ball type nickel plated brass greasing nipple • Threaded insert in nickel plated brass.
PAFV polyamide housing with Microban® Housing in reinforced polyamide PAFV resin (grey) with Microban® • Protection cover in polypropylene PP (red) with Microban® • Seal and O-Ring in NBR rubber (black) • Ball type nickel plated brass greasing nipple • Threaded insert in nickel plated brass.
PPFV polypropylene housing with Microban® Housing in reinforced polypropylene PPFV resin (white) with Microban® • Protection cover in polypropylene PP (red) with Microban® • Seal and O-Ring in NBR rubber (black). On request supplied in Viton rubber (brown). Viton material offers high resistance to chemical agents • Ball type stainless steel AISI 316 greasing nipple • Threaded insert in nickel plated brass.
Continuous operating temperature
in air : - 20 to + 60°C.
Maximum allowed misalignment: 2°.
Bearing
Series YAT (grub screws shaft locking) • Series YET (eccentric collar shaft locking) • Chrome alloy steel • Superagriseal unit • Prelubricated with lithium/ calcium grease • Can be relubricated
dyn.CN
Bearing loadBearing unit max.
static load
Max.axialload
N
Shaftdia.d
mm
202530
127001400019500
254028003900
stat.CoN
65507800
11200
160002400027000
Loads
PA FVN
Load coefficient
1) = Values are valid for applications with < h 6 shaft tolerance. Time 0,77 values must beconsidered in all other cases.
1)1)
Take-up bearing units
UCT/C-HCT/C
B39
f
a b
e
c
t
pg
iz
n dm
1 1
2
1 12
1
22
Closed unit
Open unit
Closed unit
Series UCT/CGrub screws shaft locking
Series HCT/CEccentric collar shaft locking
Open unit
2
1 Seal.O-Ring.
Dimensions in mm WeightKgBearing
Packaging : 6 pieces.
UCT 204 CUCT 205 CUCT 206 C
202530
0,330,390,50
63,568,577
505057
M 16M 20M 24
13,513,513,5
505255
171718,5
76,276,289
9292
104
252528
35,537,539,5
3439,548
YAT 204YAT 205YAT 206
666952666962666972
667072667082667092
677592677602677612
UCT 204 CUCT 205 CUCT 206 C
202530
0,330,390,50
63,568,577
505057
M 16M 20M 24
13,513,513,5
505255
171718,5
76,276,289
9292
104
252528
35,537,539,5
3439,548
YAT 204YAT 205YAT 206
666982666992667002
667102667112667122
677622677632677642
HCT 204 CHCT 205 CHCT 206 C
202530
0,360,420,53
63,568,577
505057
M 16M 20M 24
13,513,513,5
575862
171718,5
76,276,289
9292
104
252528
424347
3439,548
YET 204YET 205YET 206
667012667022667032
667132667142667152
677652677662677672
HCT 204 CHCT 205 CHCT 206 C
202530
0,360,420,53
63,568,577
505057
282828
282828
282828
282828
M 16M 20M 24
13,513,513,5
575862
171718,5
76,276,289
9292
104
252528
424347
3439,548
YET 204YET 205YET 206
667042667052667062
667162667172667182
677682677692677702
681862681872667812
681882681892667932
68194268195263154
68196268197269965
681902681912667842
681922681932667962
681982681992653322
682002682012653442
CodeSeries
Housing material
PolyamidePA FVFlange (black)Cover
(orange)
PolyamidePA FV with Microban®
Flange(grey)Cover (red)
PolypropylenePP FV with Microban®
Flange(white)Cover (red)dia.
dmm Code
Coverorange
Coverred with
Microban®
Spare parts
a c e f g i m nb
Grub screws shaft locking • Closed unit
Grub screws shaft locking • Open unit
Eccentric collar shaft locking • Closed unit
Eccentric collar shaft locking • Open unit
INDICATIVE GUIDE LINESFOR PRODUCT AVAILABILITIES: On request for appropriate
suitable quantities Please, contact our customer service for delivery times
On stock
t
d
2
t
d
2
1
t
d
2
d
t
2
1
UCT-HCT
B40
Take-up bearing units
Grub screws or eccentric collar shaft locking
Version with bearing YAR 2F
The double ring guarantees maximumprotection
against dust and non-corrosive substances.
Version with stainless steel bearing YAR 2RF
AISI 420 stainless steel bearing with 2 rubberised
rings, provides excellent seal against humidity,
steams, liquids, medium corrosive chemical agents.
Maximum load ability is inferior.
Version with bearing YAT
The rubberised ring guarantees maximum protection
against dusts.
Supports with Microban® antibacterial protection
Microban® material is effective against the most
common bacteria that may grow in foodstuff like
E. Coli, Salmonella, Listeria, S-Aureus, Campylobacter.
Material
Polyamide PA FV guarantees maximum strength
and high-temperature resistance.
Polypropylene PP FV offers excellent resistance
to chemical agents but inferior load ability.
MaterialPAFV polyamide housing Housing in reinforced polyamide PAFV resin (black) • Ball type nickel plated brass greasing nipple • Threaded insert in nickel plated brass.
PAFV polyamide housing with Microban® Housing in reinforced polyamide PAFV resin (grey) with Microban® • Bearing instainless steel AISI 420 • Ball type nickel plated brass greasing nipple • Threaded insert in nickel plated brass.
PPFV polypropylene housing with Microban® Housing in reinforced polypropylene PPFV resin (white) with Microban® • Bearing in stainless steel AISI 420 • Ball type stainless steel AISI 316 greasing nipple • Threaded insert in nickel plated brass.
Bearing
Series YAR 2F (grub screws shaft locking, chrome alloy steel, Superagriseal unitplus centrifuging ring) • Series YAR 2RF (grub screws shaft locking, stainless steel AISI 420, Superagriseal unit plus rubberised centrifuging ring) • Series YAT (grub screws shaft locking, chrome alloy steel, Superagriseal unit) • Series YET (eccentric collar shaft locking, chrome alloy steel, Superagriseal unit) • Prelubricated with lithium/ calcium grease • Can be relubricated
Continuous operating temperature
in air : - 20 to + 60°C.
Maximum allowed misalignment: 2°.
dyn.CN
PA FVN
Max.axialload
N
Shaftdia.d
mm
202530
127001400019500
160002400027000
254028003900
stat.CoN
65507800
11200
Loads
Load coefficient
Bearing loadYAR 2F - YAT - YET
dyn.CN
Max.axialload
N
108001190016250
216023803250
stat.CoN
65507800
11200
Load coefficient
Bearing loadYAR 2RF
Bearing unit max. static load
1) = Values are valid for applications with < h 6 shaft tolerance. Time 0.77 values must beconsidered in all other cases.
1)1)
1)1)
Accessories
Protection cover (accessories)
SealO-Ring
1
2
dia.d
mm Code
505255
505255
tmm
UCT HCT
202530
202530
681862681872667812
681902681912667842
681882681892667932
681922681932667962
575862
202530
68194268195263154
681982681992653322
575862
202530
68196268197269965
682002682012653442
Serie HCT Closed cover supplied with seals
Serie HCT Open cover supplied with seals
Serie UCT Closed cover supplied with seals
Serie UCT Open cover supplied with seals
Cover orange
Cover red with
Microban®
Accessories
Closedcover
Series UCTOpen cover
Series UCTClosedcover
Series HCTOpen cover
Series HCT
UCT-HCT
B41
f
a b
e
c
lpg
iz
dmn
l
Version withbearing YAR 2F
Version with stainless steel bearing YAR 2RF
Version withbearing YAT
Series UCTGrub screws shaft locking
Series HCTEccentric collar shaft locking
Grub screws shaft locking • Version with bearing YAR 2F
Grub screws shaft locking • Version with stainless steel bearing YAR 2RF
Grub screws shaft locking • Version with bearing YAT
Eccentric collar shaft locking
Packaging : 6 pieces.
WeightKgBearing
Housing material
Code
PolyamidePA FVFlange (black)
PolyamidePA FV with Microban®
Flange(grey)
PolypropylenePP FV with Microban®
Flange(white)
Dimensions in mm
UCT 204UCT 205UCT 206
202530
0,310,370,48
Series
dia.d
mm
YAR 204 2FYAR 205 2FYAR 206 2F
667672667682667692
UCT 204UCT 205UCT 206
202530
0,310,370,48
YAR 204 2RFYAR 205 2RFYAR 206 2RF
667702667712667722
667732667742667752
667762667772 667782
UCT 204UCT 205UCT 206
202530
0,310,370,48
YAT 204YAT 205YAT 206
667432667442667452
HCT 204HCT 205HCT 206
202530
0,340,400,51
YET 204YET 205YET 206
667552667562667572
63,568,577
505057
282828
M 16M 20M 24
13,513,513,5
76,276,289
9292
104
252528
35,537,539,5
29,529,532,5
171718,5
3439,548
63,568,577
a
505057
c
282828
e
M 16M 20M 24
f
13,513,513,5
g
76,276,289
m
9292
104
n
252528
35,537,539,5
29,529,532,5
p zi
171718,5
3439,548
63,568,577
505057
282828
M 16M 20M 24
13,513,513,5
76,276,289
9292
104
252528
35,537,539,5
29,529,532,5
171718,5
3439,548
63,568,577
505057
282828
M 16M 20M 24
13,513,513,5
76,276,289
9292
104
252528
40,54145,2
35,535,538,5
171718,5
3439,548
b l
667462667472667482
667522667532667542
667582667592667602
667642667652667662
INDICATIVE GUIDE LINESFOR PRODUCT AVAILABILITIES: On request for appropriate
suitable quantities Please, contact our customer service for delivery times
On stock
UCFC/C
B42
Waterproof housing
Grub screws shaft locking
PAFV polyamide housing
High mechanical and heat resistance. Proof to dust,
humidity, washouts, steam, average aggressive
chemical agents.
PPFV polypropylene housing
Proof to highly aggressive chemical agents.
Inferior loading ability.
MaterialPAFV polyamide housing Housing in reinforced polyamide PAFV resin (black) • Protection cover in polypropylene PP (orange) • Seal and O-Ring in NBR rubber (black) • Ball type nickel plated brass greasing nipple • Reinforcing bushings on mounting holes and washers in stainless steel AISI 304
PPFV polypropylene housingHousing in reinforced polypropylene PPFV resin (black) • Protection cover in polypropylene PP (orange) • Seal and O-Ring in NBR rubber (black). On requestsupplied in Viton rubber (brown). Viton material offers high resistance to chemical agents • Ball type stainless steel AISI 316 greasing nipple • Reinforcing bushings on mounting holes and washers in stainless steel AISI 316.
Continuous operating temperature
in air : - 20 to + 60°C.
Maximum allowed misalignment: 2°.
Bearing
Series YAT (grub screws shaft locking) • Chrome alloy steel • Superagriseal unit • Prelubricated with lithium/ calcium grease • Can be relubricated
Code : 67843.The system foresees semirigid dia. 4 mm tubes made out ofRilsan/Nylon. The tubes are connected to the joints bymeans of rapid graft.Material nickel plated brass.Dimension : 1/8 Gas.
Quick coupler for remote lubrication (accessory)
Loads
dyn.CN
Bearing loadBearing unit max.
static load
Max.axialload
N
Shaftdia.d
mm
35 25500 5100
stat.CoN
15300 19550 12650
PA FVN
PP FVN
23000 11500
PA FVN
PP FVN
Load coefficient
1) = Values are valid for applications with < h 6 shaft tolerance. Time 0,77 values must beconsidered in all other cases.
1)1)
Round flange bearing units
UCFC/C
B43
22
g
zt
2,5 2,5
i
dDf
Dg
e
ea
sp
1
ø88
ø88
1
1
Flange withoutcentering ring
Flange withcentering ring
Flange withoutcentering ring
Flange withcentering ring
Closed unit Open unit
1
2
Seal.O-Ring.
SeriesFlange
Closed unitWithout centering ringWith centering ring
Without centering ringWith centering ring
Open unit
2) = Dimensions Df max / Df min must be respected to ensure positive retention of the seals and to allow air bleeding during lubrication.Packaging : 6 pieces.
Dimensions in mm WeightKgBearing
Bore in frame2)
Df
UCFC 207 CUCFC 207 C35
0,750,75
137137
a
110110
p
1111
s
2626
17,317,3
g i z
42,742,7
t
5555
7272
70 5577,877,8
e
dia.d
mm
YAT 207YAT 207
683921624772
681802
UCFC 207 CUCFC 207 C35
0,750,75
137137
110110
1111
2626
17,317,3
42,742,7
5555
7272
70 5577,877,8
YAT 207YAT 207
683931624782
681812
Dg max. min. Code
Cover orange
Spare parts
603772603772
603792603792
Housing material
Code
PolypropylenePP FV
StandardFlange(black)Cover
(orange)
PolyamidePA FV
StandardFlange (black)Cover
(orange)
INDICATIVE GUIDE LINESFOR PRODUCT AVAILABILITIES: On stock On request for appropriate
suitable quantities
t
d
t
d
1
UCFC
B44
Grub screws shaft locking
Version with bearing YAR 2F
The double ring guarantees maximumprotection
against dust and non-corrosive substances.
Version with stainless steel bearing YAR 2RF
AISI 420 stainless steel bearing with 2 rubberised
rings, provides excellent seal against humidity,
steams, liquids, medium corrosive chemical agents.
Maximum load ability is inferior.
Version with bearing YAT
The rubberised ring guarantees maximum protection
against dusts.
Material
Polyamide PA FV guarantees maximum strength
and high-temperature resistance.
Accessories
Round flange bearing units
MaterialPAFV polyamide housing Housing in reinforced polyamide PAFV resin (black) • Ball type nickel plated brass greasing nipple • Reinforcing bushings on mounting holes and washers in stainless steel AISI 304.
Continuous operating temperature
in air : - 20 to + 60°C.
Maximum allowed misalignment: 2°.
Bearing
Series YAR 2F (grub screws shaft locking, chrome alloy steel, Superagriseal unitplus centrifuging ring) • Series YAR 2RF (grub screws shaft locking, stainless steel AISI 420, Superagriseal unit plus rubberised centrifuging ring) • Series YAT (grub screws shaft locking, chrome alloy steel, Superagriseal unit) • Prelubricated withlithium/ calcium grease • Can be relubricated
Quick coupler for remote lubrication (accessory)
Code : 67843.The system foresees semirigid dia. 4 mm tubes made out ofRilsan/Nylon. The tubes are connected to the joints bymeans of rapid graft.Material nickel plated brass.Dimension : 1/8 Gas.
dyn.CN
PA FVN
PA FVN
Maxaxialload
N
Shaftdia.d
mm
35 25500 19550 230005100
stat.CoN
15300
Loads
Loadcoefficient
Bearing loadYAR 2F - YAT
dyn.CN
Maxaxialload
N
21600 4320
stat.CoN
15300
Loadcoefficient
Bearing loadYAR 2RF
Bearing unit max. static load
1) = Values are valid for applications with < h 6 shaft tolerance. Time 0,77 values must beconsidered in all other cases.
1)1)
1)1)
tmm
dia.d
mm Code
5035
5035 604042
63232
Protection covers (accessories)
Closed cover
Opencover
Cover orange
Accessories
Seals1
Closed cover supplied without seals
Open cover supplied with seals
UCFC
B45
e
ea
s
p
z
dd1Df
g
h
i
Version withbearing YAR 2F
Version withbearing YAT
Version with stainless steel bearing YAR 2RF
Dimensions in mm
UCFC 20735 0,75
Series
137
a
110
p
11
s
26 12,3
g i
17,5
h z
37,7
d1
46,1 5077,8
eWeight
KgBearing
dia.d
mm
YAR 207 2F60752
Housing material
Version with bearing YAR 2F
Code
PolyamidePA FV
StandardFlange (black)
UCFC 20735 0,75137 110 11 26 12,3 17,5 37,7 46,1 5077,8 YAR 207 2RF646652
Version with stainless steel bearing YAR 2RF
UCFC 20735 0,75137 110 11 26 12,3 17,5 37,7 46,1 5077,8 YAT 207681822
Version with bearing YAT
Packaging : 6 pieces.
Bore inframe
Dfmm
INDICATIVE GUIDE LINESFOR PRODUCT AVAILABILITIES: Please, contact our customer
service for delivery times On stock
FC
B46
Waterproof housing
Shaft shoulders locking
High axial load capacity.
PAFV polyamide housing
High mechanical and heat resistance. Proof to dust,
humidity, washouts, steam, average aggressive
chemical agents
PPFV polypropylene housing
Proof to highly aggressive chemical agents.
Inferior loading ability.
MaterialPAFV polyamide housing Housing in reinforced polyamide PAFV resin (black) • Seal and O-Ring in NBR rubber (black) • Ball type nickel plated brass greasing nipple • Reinforcing bushings on mounting holes and washers in stainless steel AISI 304 .
PPFV polypropylene housing Housing in reinforced polypropylene PPFV resin (black) • Seal and O-Ring in NBR rubber (black). On request supplied in Viton rubber (brown). Viton material offers high resistance to chemical agents • Ball type stainless steel AISI 316 greasing nipple • Reinforcing bushings on mounting holes and washers in stainless steel AISI 316.
Bearing
Continuous operating temperature
in air : - 20 to + 60°C.
Maximum allowed misalignment: 2°.
Series 1200 self aligning ball bearing • Chrome alloy steel • Supplied without grease • To be prelubricated with lithium/calcium grease during first installation.
Code : 67843.The system foresees semirigid dia. 4 mm tubes made out ofRilsan/Nylon. The tubes are connected to the joints bymeans of rapid graft.Material nickel plated brass.Dimension : 1/8 Gas.
Quick coupler for remote lubrication (accessories)
Loads
dyn.CN
Bearing loadBearing unit max.
static load
35 30 15600
stat.CoN
4650 17250 11500
PA FVN
17250
PA FVN
23000 12650
PA FVN
PA FVN
PA FVN
Load coefficient
Bearingdia.d
mm
Shaftdia.damm
Round flange bearing units
FC
B47
e
ea
s
p
Df
Dg
h
g
i
t
da d
1 1
1
Dimensions in mm
FC 120630 0,57
Series
77,8
e
110
p
11
s
26 11
g h t
45 62 60 52137
aWeight
KgBearing
Bearingdia.d
mm
35
Shaftdia.damm
120665801 681842
Housing material
Closed unit
FC 120630 0,5777,8 110 11 26 11
19
i
19 45 62 60 5213735 120665891 681852
Open unit
PolyamidePA FV
StandardFlange (black)
PolypropylenePP FV
StandardFlange(black)
Bore in frame2)
Df
Dg max. min.
2) = Dimensions Df max / Df min must be respected to ensure positive retention of the seals and to allow air bleeding during lubrication.Packaging : 6 pieces.
Code
1
Closed unit
Open unit
Seal.
INDICATIVE GUIDE LINESFOR PRODUCT AVAILABILITIES: On request for appropriate
suitable quantities On stock
SBF
B48
Stainless steel AISI 304 flange
Stainless steel bearing YAR 2RF
AISI 420 stainless steel bearing with 2 rubberised
rings, provides excellent seal against humidity,
steams, liquids, medium corrosive chemical agents.
Load capacity
The pressed steel flanged support is suitable for
light duties.
Material
Continuous operating temperature
Pressed stainless steel AISI 304 flanges.
in air : - 20 to + 60°C.
Bearing
Series YAR 2RF (grub screws shaft locking, stainless steel AISI 420, Superagriseal unit plus rubberised centrifuging ring) • Prelubricated with lithium/ calcium grease • Can be relubricated.
Maximum allowed misalignment: 5°.
dyn.CN
Bearing load
Shaftdia.d
mm
25 11900
stat.CoN
7800
Loads
Load coefficient
1) = Values are valid for applications with < h 6 shaft tolerance. Time 0,77 values must be considered in all other cases.
1)
Round flange bearing units
B49
SBF
dDf
Da
Z1Z2
g
i
l
p
a
s
INDICATIVE GUIDE LINESFOR PRODUCT AVAILABILITIES: On stock
Dimensions in mm
SBF 20525 0,35
Series
76
p s
4
g
2 18
i l
12,3
Z2
56
Da
60
Z1
21,895
aWeight
KgBearing
dia.d
mm
YAR 205 2RF604562
Housing material
Code
Stainless steelAISI 304
Packaging : 4 pieces.
Bore inframe
Dfmm
8,7
B50
Spare parts
UCF/C - UCF - UCFS/C - UCFL/C - UCFL - UCFSL/C - UCP/C - UCP
F - FL - FC
UCPA/C- UCPA - UCFB/C - UCFB - UCT/C - UCT
dia.d
mm Code
Seal
Ball type greasing nipple
17202530354040*45*50*
69615263215160894168416 641111632141603622686832686842
Seal69615263215160894168416 641111632141603622686852686862
69615263215160894168416 641111632141603622686852686862
63617
Ball type greasing nipple64437 64437
Housing material
PolyamidePA FV
StandardFlange (black)
PolyamidePA FV withMicroban®
Solid Flange(grey)
PolypropylenePP FV with Microban®
Solid Flange(white)
dia.damm Code
Seal
Ball type greasing nipple
253035404545*
603642603662 603682603702603722603742
Seal603642603662 603682603702603722603742
63617
Ball type greasing nipple64437
Housing material
PolyamidePA FV
StandardFlange (black)
PolypropylenePP FV
StandardFlange (black)
dia.d
mm Code
Seal
Ball type greasing nipple
172025303540
69615263215160894168416 641111632141
Seal69615263215160894168416 641111632141
69615263215160894168416 641111632141
665432
Ball type greasing nipple665422 665422
Housing material
PolyamidePA FV
StandardFlange (black)
PolyamidePA FV withMicroban®
Solid Flange(grey)
PolypropylenePP FV with Microban®
Solid Flange(white)
*= Version with special fixing holes.- Material : seal in NBR rubber (black). Ball type nickel plated brass greasing nipple for PA FV version, ball type stainless steel AISI 316 for PP FV version.
*= Version with special fixing holes.- Material : seal in NBR rubber (black). Ball type nickel plated brass greasing nipple for PA FV version, ball type stainless steel AISI 316 for PP FV version.
- Material : seal in NBR rubber (black). Ball type nickel plated brass greasing nipple for PA FV version, ball type stainless steel AISI 316 for PP FV version.
B51
Technical information
1) Bearings • Bearings with grub screw locking system• Bearings with self locking eccentric collar• Seals• Maximum velocities• Axial load capacities• Self aligning ball bearings, holding by shoulders on shaft
2) Calculation data• Definition of bearing dimensions • Calculation method for self-aligning bearings• Life• Life expectation calculation• Equivalent dynamic load calculation• Static load capacity control• Equivalent static load calculation
3) Lubrication• Prelubrication• Lubrication grease• Relubrication• Relubrication intervals
4) Grease life in bearings lubricated for life• Formula to calculate grease life• Diagram 1 grease nominal life• Diagram 2 correction factor• Example of calculation
5) Shaft tolerances• Shaft tolerances for bearings with grub screws or eccentric collar locking system • Shaft tolerances for bearings with shoulders type holding system
6) Mounting• Mounting recommendations• Bearing locking by grub screws• Bearing locking by eccentric collar• Installation/removal of covers
B52B52B53B53B53B53
B54B54B54B54B55B56B56
B57B57B57B57
B58B58B59B59
B60B60
B61B61B61B61
D d d1
s
B
C
2-120
G
r2
r1
D
C
s
B
r2
d d1
2-120
G
r1
D
C
s
B1
G
r2
d d2
r1
D
C
s
B
r2
d d1
2-120
G
r1
B52
Prelubricated with long lasting lithium/calcium grease • Can be rilubricatedBearings with grub screw locking system
Bearings with self locking eccentric collar
Series YAT
Series YET
Series YAR 2F
Series YAR 2RFstainless steel
Prelubricated with long lasting lithium/calcium grease • Can be rilubricated • Higher resistance to vibrations • Suitable for single directional travel (cannot reverse the sense of rotation) • Locking of the bearing is achieved by rotating the eccentric collar. The grub screw holds the collar and avoids rotation
Dimensions in mm
d2 D B1 C s GBearing
typeGrub
screwsd
mmr1, r2
min.Weight
Kg
Chrome alloy steel.
Chrome alloy steel.
Stainless steel AISI 420.
Chrome alloy steel.
stat.Co N
dyn.C N
Load coefficient
Dimensions in mm
d1 D B C s GBearing
typeGrub
screwsd
mmr1, r2
min.Weight
Kg
Dimensions in mm
d1 D B C s GBearing
typeGrub
screwsd
mmr1, r2
min.Weight
Kg
stat.Co N
dyn.C N
Load coefficient
Dimensions in mm
d1 D B C s GBearing
typeGrub
screwsd
mmr1, r2
min.
stat.Co N
dyn.C N
Load coefficient
WeightKg
stat.Co N
dyn.C N
Load coefficient
YAT 203YAT 204 YAT 205YAT 206YAT 207 YAT 208YAT 209YAT 210
1720253035404550
950012700140001950025500307003320035100
475065507800
1120015300190002160023200
22,125,527,230,233363738,8
1214151819212222
0,30,60,60,61111
6,27,27,79,29,7
10,711,211,2
44,5556878
M6x0,75M6x0,75M6x0,75M6x0,75M6x0,75M6x0,75M6x0,75M8x1
0,070,110,140,230,310,430,480,54
24,228,233,739,746,151,856,862,5
4047526272808590
YAR 203 2FYAR 204 2FYAR 205 2FYAR 206 2FYAR 207 2FYAR 208 2FYAR 209 2FYAR 210 2F
1720253035404550
950012700140001950025500307003320035100
475065507800
1120015300190002160023200
27,43134,138,142,949,249,251,6
1214151819212222
0,30,60,60,61111
11,512,714,315,917,5191919
3,54,5556889
0,090,140,170,280,410,550,600,69
24,228,233,739,746,151,856,862,5
4047526272808590
YAR 204 2RFYAR 205 2RFYAR 206 2RFYAR 207 2RFYAR 208 2RF
2025303540
1080011900162502160026000
65507800
112001530019000
3134,138,142,949,2
1415181921
0,60,60,611
12,714,315,917,519
4,55568
0,140,180,290,420,56
28,233,739,746,151,8
4752627280
YET 203YET 204YET 205YET 206YET 207YET 208YET 209YET 210
1720253035404550
28,6313135,738,943,743,743,7
1214151819212222
6,57,57,59,09,5 111111
0,100,160,180,300,490,620,650,70
28,63337,444,255,660,363,567,5
4047526272808590
M6x0,75M6x0,75M6x0,75M6x0,75M6x0,75M8x1M8x1M10x1
M6x0,75M6x0,75M6x0,75M6x0,75M8x1
0,30,60,60,61111
4,75556776,756,75
M6x0,75M6x0,75M6x0,75M8x1M10x1,25M10x1,25M10x1M10x1
950012700140001950025500307003320035100
475065507800
1120015300190002160023200
Bearings
1) = Values are valid for applications with < h 6 shaft tolerance. Time 0.77 values must beconsidered in all other cases.
1) = Values are valid for applications with < h 6 shaft tolerance. Time 0.77 values must beconsidered in all other cases.
1) = Values are valid for applications with < h 6 shaft tolerance. Time 0.77 values must beconsidered in all other cases.
1) = Values are valid for applications with < h 6 shaft tolerance. Time 0.77 values must beconsidered in all other cases.
Bearings
B53
D1
D
B
d d2
r2r1
Int. dia. bearing
dmm
Series YAT - YET. The system consists of a metallic ring fitted with a low friction rubber sealing lip.Series YAR 2F. The system is further equipped with a metallic protection ring providing a centrifugal sealing action.Series YAR 2RF inox. The upper lip of the centrifuging ring together with the grease trapped between the base seal and the ring it self guarantees maximum sealing capacity.
Seals
Speed (RPM)
h6 h7 h8 h9 h11Shaft tolerance
Dimensions in mm
D B d2 D1Bearing
typed
mmr1, r2
min.
Self aligning ball bearingholding by shoulders on shaft
Axial load capacities
Maximum velocities
Metal ring with sealing lip
Series YAT- YET Series YAR 2F Series YAR 2RF inox
Centrifuging ring
Rubberised centrifuging ring
Series 1200
The bearings have double row of balls running on a spherical outer race This configuration renders the bearing self aligning • The bearings are supplied without sealing units • They are held into position by shoulders on the shaft
The bearing locking systems by grub screws/eccentric collars, allow axial loads up to 20% of the dynamic load coefficient (only with non hardened shafts and grub screws tightened as recommended) • For bearings of the YAT, YET, YAR 2F, YAR 2RF, series it is not recommended to exceed the value of: 0,25•C
The table indicates the values for YAT, YET, YAR 2F series bearings • Stainless steel bearings of the YAR 2RF series (rubberised centrifuging ring) must not be operated at velocities in excess of 60% of the values indicated • The maximum velocity is dependant of the shaft tolerances. Higher tolerances require lower speed
Revolu-tionsRPM
WeightKg
stat.Co N
dyn.C N
Load coefficient
Bearings
95008500700063005300480043004000
60005300450040003400300026002400
43003800320028002200190017001600
150013001000900750670600560
950850700630530480430400
1720253035404550
12041205120612071208
2025303540
1270014300156001900019900
34004000465060006950
28,933,340,14753,6
4145,65362,368,8
1111,11,1
0,120,140,220,320,42
4752627280
1415161718
150001300010000
90008500
B54
Plant typePlant expected life L10h
hours
Seasonal Operation plantsDaily operated plant, 8 hours/day, not completely utilisedDaily operated plant, 8 hours/day, completely utilisedDaily operated plant, 24 hours/day
4000 ÷ 800010000 ÷ 2000020000 ÷ 3000040000 ÷ 80000
Service life
Expected life calculation formula
The dimensioning of the bearing requires the knowledge of the appropriate life expectancy of the project in relation to the specific application. This depends on the type of plant, daily/yearly working hours and on the required reliability.In the absence of practical experience Table 1 gives our recommendations of the average expected plant life under various conditions.
Table 1 - Recommended plant expected life L10h for MB support bearings
Bearing dimensioning
Calculation procedures for self-aligning bearings
Correct expected life
The calculation procedure for self-aligning bearings consists in ensuring a satisfactory operating life of the unit:
1) - The nominal service life is calculated using the formulas indicated below, keeping in mind the type of stress on the bearing (dynamic or static).
2) - The nominal life of the bearing should reflect the expected service life of the plant as indicated in Table 1 hereunder.
The calculating procedure for nominal duration is valid whatever the type of bearing.
L10h = • ( )CP
3Life in hours
When bearings rotate at constant speed it is more practical to calculate the life in number of hours
16666n
L10 = ( )CP
3Life in Millions revolutions
Dynamically stressed bearingsBearings which rotate under load are considered dynamically stressed (one ring of the bearing makes one full rotation against the other). In most cases, self-aligning supports are dynamically stressed.
The service life of a bearing is expressed in the number of revolutions or hours of operations which can be expected without breakdown (erosion or laminations of the bearing revolving parts).
Calculation data
The bearing dimensions, for a given application, should be chosen on the basis of the loads to be supported, expected service life and reliability. In most cases the reason for choosing a bearing is the fact that the shaft has already been sized during the design of the plant.
In the majority of cases, for self alinging MB bearings, it is sufficient to calculate L10 , L10h using the formula indicated above. The new theory of life calculation permits to establish the correct life expectancy keeping into consideration the effects of lubrication, pollution of solid particles and of the fatigue limit load Pu (values are reported in the bearing tables).The calculation of the correct expected life requires therefore the assistance of the technical commercial staff.
L10L10hCPn
= life in millions of revolutions.= life in hours. = dynamic load coefficient (N). Values are indicated in the support dimensional tables. = equivalent dynamic load (N). See calculation formula on Table 2.= revolutions (RPM).
B55
Fr
Fr
Fa
Fr
Fr
Fa
Table 2 - Equivalent dynamic load P calculation
YATYETYAR 2FYAR 2RF
2025303540
0,300,280,250,230,22
2,12,22,52,72,9
3,33,53,94,24,5
e1 Y1 Y2
2,22,52,52,82,8
Yo
1200
P = Fr
P = X • Fr + Y • Fa
P = Fr
P = Fr + Y1 • Fa
P = 0,65 • Fr + Y2 • Fa
FaFr
≤ e1with
FaFr
> e1with
Equivalent dynamic load P calculation
Bearing typeEquivalent dynamic load P (N) calculation formula
Load direction on the bearing
P
FrFax, Ye1, Y1, Y2
= equivalent dynamic load (N). = radial load acting on the bearing (N).= axial load acting on the bearing (N). = load factors. See Table 3.= factors. See Table 4.
Int. dia.bearing
mm
Table 3 - Load factors x, y
RatioFaCo
0,0250,040,070,130,250,5
0,220,240,270,310,370,44
111111
000000
e x y
FaFr
≤ eWith:
0,560,560,560,560,560,56
21,81,61,41,21
x y
FaFr
With: > e
Co = Static load coefficient (N). The values are indicated in the support dimensional tables.
Table 4 - Factors e1, Y1, Y2, Yo
With steady loads/light impacts:With loads and medium impacts:
multiply the equivalent dynamic load P by: 1,2 ÷ 1,5multiply the equivalent dynamic load P by: 1,7 ÷ 2,0
Operating conditions coefficients
It should be common practice to include operational factors when calculating bearing dimensions to allow for load variations which may happen during running of the plant. The coefficients given here under are indicative only and are based on actual operational experience.
Calculation data
B56
Calculation data
The static safety coefficient fs must not exceed the recommended values given in Table 5 in order to obtain a satisfactory performance of the bearings.Coefficient fs gives the safety margin against excessive permanent deformation of the revolving parts of the bearing.
Statically stressed bearingsIn rolling-contact bearing technology the condition of static load is considered to exists when:- The bearing does not rotate and is subjected to permanent loads or intermittent ones (impacts).- The bearing is subjected to loads and slow oscillating movements.- The bearing rotates under load at a very low speed and for short periods.- The bearing rotates under load and must withstand strong impacts acting in the course of one revolution.
fs = CoPo
fsCo
Po
Table 5 - Static safety coefficient fs for MB bearings
Type of operation
Noise level not important
Smooth operation without vibration
Normal operation
Impact loads operation
0,5
0,5
≥ 1,5
Normal noise level operation
Revolving bearings
Non revolving bearings
1
1
≥ 1,5
nicht drehende Lager
2
2
≥ 2
0,4
0,5
≥ 1
Po = 0,6 • Fr + 0,5 • Fa
Po = Fr + Yo • Fa
YATYETYAR 2FYAR 2RF
1200
Equivalent static load Po calculation
Static load capacity control
= static safety coefficient.= static load coefficient (N). The values are given in the support dimensional tables.= equivalent static load (N). See calculation formula given below.
If Po < Fr, then assume Po = Fr.
Po
FrFaYo
= equivalent static load (N). = radial load on the bearing (N).= axial load on the bearing (N).= see table 4, page B55.
Bearing typeEquivalent dynamic load P (N) calculation formula
Load direction on the bearing
Fr
Fa
Fr
Fa
B57
Relubrication
Relubrication intervals
Warning• Do not grease at first assembly.
• The first lubrication must be carried out only for bearings of the series FL - F - FC held by the shaft shoulders.
• Stainless steel pressed metal supports of the series SBF are not relubricatable.
• Use only grease of same characteristics as indicated.
• Clean greasing nipple before each greasing operation.
• Inject grease slowly until it comes out from the bearing. Keep the bearing rotating and do not apply excessive pressure which could damage the sealing units.
• More frequent greasing operations with smaller quantities of grease are to be preferred.
All self-aligning bearings are supplied factory lubricated.WarningThe first lubrication must be carried out only for bearings of the series FL - F - FC held by the shaft shoulders.
Bearings are prelubricated with long lasting lithium/calcium grease.
Technical data NLGI consistency :Emulsifier :Base oil :Base oil viscosity :Operating temperature :Water resistance :Antioxidant properties :
2lithium/calciummineral165 mm2/s at 40°C- 20°C to +120°CRecommendedRecommended
Relubrication intervals vary according to actual operating conditions. Very often during operation, load, speed, temperature and ambient conditions (humidity, dust) may vary making it difficult to establish exact rules. Experience once again gives the best answer:
• Light operating conditions :• Normal operating conditions :• Heavy operating conditions :
relubricate every 6 months.relubricate every 1÷ 3 months.relubricate every 2 weeks.
All self-aligning bearing units are equipped with a grease nipple of the ball type to allow periodical relubrication of the bearing.
Lubrication
Prelubrication
Lubricating grease
dm dddm
100.000
10.000
50.000
1.000
5.000
100
500
40 45 50 5535GPF=1 65 70 75 80 85 90 95 100 105 11060
700.000
600.000
500.000
400.000
300.000
200.000
nxdm=100.000 20.000<_
B58
Operating temperature (C)
Gre
ase
nom
inal
life
L1O
h (h
ours
)
n=rotational speed (rpm)dm=mean diameter (mm)
dm (mm) = mean diameter.
dia. d
mm
dia. dmmm
1720253035404550
28,533,538,54653,5606570
Grease life in bearings lubricated for life
This procedure allows to calculate the grease life as a function of its quality and bearing type, dimension, rotating speed, applied loads and working temperature.
Diagram 1 - Grease nominal life L10h
Lh = L10h x Fc Grease life (hours )
LhL10h
Fc
= Grease life (hours).= Grease nominal life (hours). See Diagram 1. = Correction factor. See Diagram 2.
= At room temperature, with normal working conditions, the grease works at a temperature lower than 55C.55
Series YAT
Series YET
Formula to calculate grease life in bearings lubricated for life
This diagram allows to determine the nominal grease life L10h (hours), as a function of rotating speed n (rpm), mean diameter dm (mm), bearing working temperature (C ).Greases are classified by a factor GPF (Grease Performance Factor ), related to their temperature performance. In this table we consider a grease with GPF = 1, which is the grease used in all Marbett LifeLube bearings.
(dry use recommended)
B59
d dm
4 6 8 10 13 15 18 20
1,0
0,7
0,5
0,2
0,1
Load C/P
Corr
ecti
on fa
ctor
Fc
Diagram 2 - Correction factor Fc
C = Dynamic load coefficient (N). Values are indicated in the bearings dimensional tables.= Equivalent dynamic load (N). See Table 2 page B55P
Example of calculation
Data :- Bearing type YAT 208.- d=40 mm (shaft dia.). - dm = 60 mm. (bearing mean dia.).- n=300 rpm. (rotational speed). - 55 C (grease operating temperature). - C=23600 N ( Dynamic load coefficient).- P = 3000 N (equivalent dynamic load).
The corrective factor Fc, keeps into cosideration the influence of load applied on bearings as a function of load ratio C / P. With low loads (C/P > 15) the duration of the grease is not influenced by load values.
Grease life in bearings lubricated for life
- From Diagram 1, as a function of : nxdm = 300 rpm x 60 mm = 18000 we read a nominal grease life of : L10h=100000 hours.
- Calculation of estimated grease life : Lh= L10hxFc = 100000 hoursx0,5 = 50000 hours.
- From Diagram 2, as a function of : C/P = 23600 N : 3000 N = 7,8 we read a corrective factor of : Fc=O,5.
(dry use recommended)
B60
Tolerances for grub screws/ eccentric collar locked bearings
Tolerances for shaft shoulders locked bearings
• The tables indicate shaft diameter tolerances.• Shaft ends must be rounded off in order to: - ease assembly and avoid bearing jamming. - avoid damages to the rubber parts of the sealing units.• The shaft surface for the portion in contact with the sealing gaskets must be smooth and free of defects (scratches etc.)
• Shaft ends must be rounded off in order to: - ease assembly and avoid bearing jamming. - avoid damages to the rubber parts of the sealing units.• The shaft surface for the portion in contact with the sealing gaskets must be smooth and free of defects (scratches etc.).• The mounting shaft/bearing is free to facilitate assembly. For heavy radial loads conditions it is recommended a slightly tight mounting.
Shaftdia.d
mm
1720 3035 50
000
- 11- 13- 16
Normaloperation
ISO shaft tolerance
Light loadsLow speed
h 6plus min.
000
- 18- 21- 25
h 7plus min.
000
- 27- 33- 39
h 8plus min.
000
- 43- 52- 62
h 9plus min.
000
- 70- 84- 100
h 10plus min.
000
- 110- 130- 160
h 11plus min.
Heavy loadsHigh speed
Simple applications
Tolerances in µm
Shaft tolerances
h values are given in the support dimensional tables
d
R 1,5R 1,5
dda
- 0,0
2- 0
,05
0- 2
h11
Lh h
L + 2•h
R 1,5R 1,5
B61
Assembly instructions
Locking of the bearing by grub screws
Locking of the bearings by eccentric collar
Assembly/removal of the protection cover
3 - The table gives the recommended maximum tightening couples for the grub screws and the size of the hexagonal to use.
4 - Tighten the collar by turning it with a punch in the same direction as the rotation of the shaft.5 - Hand tighten the grub screw. The screw driver dimension and the tightening couple are given in the table above (Ref. YET series bearings).
6 - Assembly. The sealing unit of open end covers must be greased to avoid initial dry running on the shaft. The grease must fill only the space in between the two sealing lips.7 - Removal. Insert a screw driver into the groove provided for and force the cover out.
1 - With waterproof bearings the rubber sealing units must be greased before mounting to avoid initial dry running on the shaft. The grease must fill only the space in between the two sealing lips.2 - The bearing must be locked onto the shaft after the support mounting flange has been fully tightened. This is necessary to allow the bearing to assume its correct alignment on the shaft without undue axial stresses. Always tighten the screws diagonally (max. tightening couple for M10 screw = 50 Nm).
Int. dia.bearing
mm
1720253035404550
33333334
33333345
Sc. driver size mm
BearingsYAT - YAR
33345555
BearingsYET
44444446,5
4444446,516,5
Max. tightening coupleNm
BearingsYAT - YAR
4 4 4 6,516,516,516,516,5
BearingsYET
Mounting