self-drilling screw fixings - index fixing systems · self-drilling screw fixings denomination:...
TRANSCRIPT
TECHNICAL DATA SHEET
SELF-DRILLING SCREW FIXINGS
Denomination: SELF-DRILLING SCREW FIXINGS Codes: ABE, ABEI, ARE, ABR, ABRBLE, NBR, ABRC, ABRCA2, ABRA2, ABA, FS, ABP, NBP, ABPC, ABPCA2, TAEZ, TAEN, BCPZ, BZPZBL, BCPN, BCPB, BCPA2, BIE, AUTO, BAUTO, RS.
Reference: FT BRO-en Date: 18/05/18 Revision: 11 Page: 1 of 23
ABE ABEI ARE
AUTO BIE (ver FT BIE) BAUTO (ver FT BIE)
ABR ABR__BLE NBR
ABRA2 ABRC ABRCA2
ABPC ABPCA2 ABP
NBP BCPZ BCPB
BCPN BCPA2 BCPZ__BL
RSZ TAEZ TAEN
ABA FS
TECHNICAL DATA SHEET
SELF-DRILLING SCREW FIXINGS
Denomination: SELF-DRILLING SCREW FIXINGS Codes: ABE, ABEI, ARE, ABR, ABRBLE, NBR, ABRC, ABRCA2, ABRA2, ABA, FS, ABP, NBP, ABPC, ABPCA2, TAEZ, TAEN, BCPZ, BZPZBL, BCPN, BCPB, BCPA2, BIE, AUTO, BAUTO, RS.
Reference: FT BRO-en Date: 18/05/18 Revision: 11 Page: 2 of 23
CHARACTERISTICS APPLICATIONS
Drill point: drill material directly – no need for pre-drilled hole.
Self-tapping thread.
Wide variety of head types, diameters and lengths for different applications: flexibility in installation.
Available in zinc plated, black zinc-plated, white zinc-plated and silver ruspert coatings.
Versions in standard commercial lacquered plate colours (RAL colour scheme).
Coloured caps available for hexagonal heads.
For joining metal to wood, joining metallic elements, or plastic, wood or other materials on metallic materials.
Versions with galvanized steel-EPDM or stainless steel-EPDM washer for sealed joints in façades and roofing, in different diameters.
BASE MATERIALS
APPLICATION EXAMPLES
TECHNICAL DATA SHEET
SELF-DRILLING SCREW FIXINGS
Denomination: SELF-DRILLING SCREW FIXINGS Codes: ABE, ABEI, ARE, ABR, ABRBLE, NBR, ABRC, ABRCA2, ABRA2, ABA, FS, ABP, NBP, ABPC, ABPCA2, TAEZ, TAEN, BCPZ, BZPZBL, BCPN, BCPB, BCPA2, BIE, AUTO, BAUTO, RS.
Reference: FT BRO-en Date: 18/05/18 Revision: 11 Page: 3 of 23
SELECTION TABLE
Code Regulation Head Socket ø EPDM
washer (1) Material/Coating (2)
Material to be fixed
ABE
DIN 7504K Hexagonal with
washer --- 14, 16, 18, 25 Steel / Zinc-plated Steel
ABEI
DIN 7504K Hexagonal with
washer --- --- Stainless Steel Aluminum
BIE
DIN 7504K Hexagonal with
washer --- 16 A2 / Silver ruspert
Steel and Stainless Steel
ARE
--- Hexagonal with
washer --- 16, 18, 25 Steel / Zinc-plated Steel
AUTO
--- Hexagonal with
washer --- 16 Steel / Zinc-plated Steel
BAUTO
--- Hexagonal with
washer --- 16 A2 / Silver ruspert
Steel and Stainless Steel
ABR
DIN 7504N Round head Ph --- Steel / Zinc-plated Steel
NBR
DIN 7504N Round head Ph --- Steel / Black zinc-plated Steel
ABR__BLE
DIN 7504N Round head Ph --- Steel / Zinc-plated + paint Steel
ABRA2
DIN 7504N Round head Ph --- Stainless Steel Aluminium
ABRC
DIN 7504N Round head Square --- Steel / Zinc-plated Steel
ABRCA2
DIN 7504N Round head Square --- Stainless Steel Aluminium
ABA
--- Countersunk Ph --- Steel / Zinc-plated Wood + Steel
FS
--- Hexagonal with
washer --- 14 Steel / Zinc-plated Steel + Wood
ABP
DIN 7504P Countersunk Ph --- Steel / Zinc-plated Steel
NBP
DIN 7504P Countersunk Ph --- Steel / Black zinc-plated Steel
ABPC
DIN 7504P Countersunk Square --- Steel / Zinc-plated Steel
TAEZ
--- Flat head Ph --- Steel / Zinc-plated Steel
TAEN
--- Flat head Ph --- Steel / Black zinc-plated Steel
BCPZ
--- Extra-flat bevelled
Ph --- Steel / Zinc-plated Steel
BCPN
--- Extra-flat bevelled
Ph --- Steel / Black zinc-plated Steel
BCPB
--- Extra-flat bevelled
Ph --- Steel / Zinc-plated + paint Steel
BCPZ__BL
--- Extra-flat bevelled
Ph --- Steel / Zinc-plated + paint Steel
BCPA2
--- Extra-flat bevelled
Ph --- Stainless Steel Aluminium
RSZ
--- Flat bevelled Ph --- Steel / Zinc-plated Steel
(1) EPMD washer characteristics according to ARVUL Data Sheet (2) Coatings: Zinc-plated ≥ 3 µm according to ISO 4042 A1J
Black zinc-plated ≥ 3 µm according to ISO 4042 A1N Silver ruspert > 500 hours in saline mist chamber according to ISO 9227
TECHNICAL DATA SHEET
SELF-DRILLING SCREW FIXINGS
Denomination: SELF-DRILLING SCREW FIXINGS Codes: ABE, ABEI, ARE, ABR, ABRBLE, NBR, ABRC, ABRCA2, ABRA2, ABA, FS, ABP, NBP, ABPC, ABPCA2, TAEZ, TAEN, BCPZ, BZPZBL, BCPN, BCPB, BCPA2, BIE, AUTO, BAUTO, RS.
Reference: FT BRO-en Date: 18/05/18 Revision: 11 Page: 4 of 23
MATERIALS
Characteristic ABE, ARE, AUTO, ABR, ABRBL, NBR,
ABRC, ABA, FS, ABP, NBP, ABPC, TAEZ, TAEN, BCPZ, BCPN, BCPB, RS
ABRA2, ABRCA2, ABPCA2, BCPA2
BIE, BAUTO (silver ruspert coating)
Material Special steel for SAE J403 1022 thermal
treatment A2 Stainless Steel
A2 Stainless Steel head and shaft. Special steel point for SAE J403 1022
thermal treatment
Surface hardness > 500 HV --- Head and shaft ---
Point > 500 HV
Core hardness 240 - 450 HV --- Head and shaft --- Point 240 - 450 HV
Depth hardness ST 2.5 – 3.5: 0.05 – 0.18 mm. ST 3.9 – 5.5: 0.10 – 0.23 mm. ST 6.3: 0.15 – 0.28 mm.
---
Head and shaft --- Point:
ST 4.8 – 5.5: 0.10 – 0.23 mm. ST 6.3: 0.15 – 0.28 mm.
POINT SELECTION
The choice of screw point must be such that the total thickness of materials to be joined (including any intermediate
spaces) is lower than the edge of the drill point; otherwise screw breakage may occur during installation.
TECHNICAL DATA SHEET
SELF-DRILLING SCREW FIXINGS
Denomination: SELF-DRILLING SCREW FIXINGS Codes: ABE, ABEI, ARE, ABR, ABRBLE, NBR, ABRC, ABRCA2, ABRA2, ABA, FS, ABP, NBP, ABPC, ABPCA2, TAEZ, TAEN, BCPZ, BZPZBL, BCPN, BCPB, BCPA2, BIE, AUTO, BAUTO, RS.
Reference: FT BRO-en Date: 18/05/18 Revision: 11 Page: 5 of 23
INSTALLATION PARAMETERS
Parameter ST 3.5 ST 3.9 ST 4.2 ST 4.8 ST 5.5 M 5.5
ST 6.3
Maximum installation strength
[N] 150 200 250 250 350 350
Dri
ll Sp
eed
Steel [rpm] 1800 - 2500 1000 - 1800
Stainless Steel [rpm] 1000 - 1500 600 - 1000
Maximum time [sg] 4 4.5 5 7 11 13
Maximum torque [Nm] 2.8 3.8 4.7 6.9 10.4 16.9
10 N ≈ 1 Kg 10 Nm ≈ 1Kg m
With high drilling times or excessive drilling speed there is a risk of burning the drill bit and therefore not drilling the material.
TECHNICAL DATA SHEET
SELF-DRILLING SCREW FIXINGS
Denomination: SELF-DRILLING SCREW FIXINGS Codes: ABE, ABEI, ARE, ABR, ABRBLE, NBR, ABRC, ABRCA2, ABRA2, ABA, FS, ABP, NBP, ABPC, ABPCA2, TAEZ, TAEN, BCPZ, BZPZBL, BCPN, BCPB, BCPA2, BIE, AUTO, BAUTO, RS.
Reference: FT BRO-en Date: 18/05/18 Revision: 11 Page: 6 of 23
MAXIMUM THICKNESS TO BE FIXED
Length ST 3,5 ST 3,9 ST 4,2 ST 4,8 ST 5,5 ST 6,3
9,5 2,85
11 4,2
13 6,2 5,8 4,3 3,7
16 9,2 8,8 7,3 5,5
19 12,1 11,7 10,3 8,7 8,7 7
22 15,1 14,7 13,3 11,7 11,7 10
25 18,1 17,7 16,3 14,7 14,7 13
32 25,1 24,5 23 21,5 21,5 20
38 30,5 29 27,5 27,5 26
45 36 34,5 34,5 33
50 41 39,5 39,5 38
60 49,5 49,5 48
63 52,5 52,5 51
73 62,5 62,5 61
75 64,5 64,5 63
80 69,5 68
90 79,5 78
100 89,5 88
110 98
120 108
130 118
140 128
SCREW RESISTANCE CHARACTERISTICS*
.
1 KN ≈ 100 Kg
For tension loads, the inherent resistance of plates to be fixed must be taken into account, which is usually less than the resistance of the screw itself, as the screw will probably tear the plates.
SIZE TENSION
[kN] SHEAR
[kN]
ST 2.9 2.62 1.31
ST 3.5 3.81 1.91
ST 3.9 4.64 2.32
ST 4.2 5.26 2.63
ST 4.8 7.11 3.56
ST 5.5 9.63 4.82
ST 6.3 13.36 6.68
TECHNICAL DATA SHEET
SELF-DRILLING SCREW FIXINGS
Denomination: SELF-DRILLING SCREW FIXINGS Codes: ABE, ABEI, ARE, ABR, ABRBLE, NBR, ABRC, ABRCA2, ABRA2, ABA, FS, ABP, NBP, ABPC, ABPCA2, TAEZ, TAEN, BCPZ, BZPZBL, BCPN, BCPB, BCPA2, BIE, AUTO, BAUTO, RS.
Reference: FT BRO-en Date: 18/05/18 Revision: 11 Page: 7 of 23
RECOMMENDED TENSION LOAD IN STEEL PLATE
RECOMMENDED TENSION LOAD IN ALUMINIUM PLATE
SIZE RECOMMENDED LOAD
e[mm] N[kN] e[mm] N[kN] e[mm] N[kN]
ST 3.5 0.8 0.55 1.5 0.89 2.0 1.13
ST 3.9 0.8 0.54 1.5 0.97 2.0 1.50
ST 4.2 2.0 1.63 2.5 1.51 3.0 2.62
ST 4.8 2.0 1.87 3.0 2.77 4.0 3.71
ST 5.5 2.0 1.77 3.5 2.86 5.0 3.43
ST 6.3 2.5 1.44 4.0 3.19 5.0 4.83
SIZE RECOMMENDED LOAD
e[mm] N[kN] e[mm] N[kN] e[mm] N[kN]
ST 4.8 2.0 0.95 3.0 1.52 4.0 2.10
TECHNICAL DATA SHEET
SELF-DRILLING SCREW FIXINGS
Denomination: SELF-DRILLING SCREW FIXINGS Codes: ABE, ABEI, ARE, ABR, ABRBLE, NBR, ABRC, ABRCA2, ABRA2, ABA, FS, ABP, NBP, ABPC, ABPCA2, TAEZ, TAEN, BCPZ, BZPZBL, BCPN, BCPB, BCPA2, BIE, AUTO, BAUTO, RS.
Reference: FT BRO-en Date: 18/05/18 Revision: 11 Page: 8 of 23
1. ABE Self-drilling screw - hexagonal head with embossed washer
Properties
Steel Zinc-plated coating Available in
different colours
Base material Properties
Plate assembly Plate profile Hexagonal with
embossed washer Hexagonal with
embossed washer Screw point
1.1. Details
Code ST 3.5 ST 4.2 ST 4.8 ST 5.5 ST 6.3
dk: washer head diameter [mm] 8 8.5 10 10.5 12.6
k: head thickness [mm] 3.3 4.1 4.3 4.3 6.3
c: washer thickness [mm] 1.2 1.5 1.6 1.9 2
s: spanner [mm] 6 7 8 8 10
D: exterior thread diameter [mm] 3.53 4.22 4.80 5.46 6.25
d: interior thread diameter [mm] 2.64 3.10 3.58 4.17 4.88
p: thread [mm] 1.3 1.4 1.6 1.8 1.8
l: lengths [mm] 9.5 - 32 13 - 38 13 - 38 19- 75 19 - 240
Installation bit code (hexagonal magnetic bit)
BOCA006 BOCA007 BOCA008 BOCA008 BOCA010
Drill capacity [mm] 0.70 - 2.25 1.75 - 3.00 1.75 - 4.40 1.75 - 5.25 2.50 - 6.00
Zinc-plated finish.
For general plate-plate joints.
Versions with assembled EPMD washer for sealed joints in façades and roofing (consult ARVUL Technical Data Sheet).
TECHNICAL DATA SHEET
SELF-DRILLING SCREW FIXINGS
Denomination: SELF-DRILLING SCREW FIXINGS Codes: ABE, ABEI, ARE, ABR, ABRBLE, NBR, ABRC, ABRCA2, ABRA2, ABA, FS, ABP, NBP, ABPC, ABPCA2, TAEZ, TAEN, BCPZ, BZPZBL, BCPN, BCPB, BCPA2, BIE, AUTO, BAUTO, RS.
Reference: FT BRO-en Date: 18/05/18 Revision: 11 Page: 9 of 23
2. ABEI Self-drilling screw - hexagonal head with embossed washer Stainless Steel A2
Properties
Stainless Steel A2
Base material Properties
Plate assembly Plate profile Aluminium Hexagonal with
embossed washer Hexagonal with
embossed washer Reduced screw
point
1.2. Details
Code ST 4.2 ST 4.8 ST 5.5 ST 6.3
dk: washer head diameter [mm] 8.5 10 10.5 12.6
k: head thickness [mm] 4.1 4.3 4.3 6.3
c: washer thickness [mm] 1.5 1.6 1.9 2
s: spanner [mm] 7 8 8 10
D: exterior thread diameter [mm] 4.22 4.80 5.46 6.25
d: interior thread diameter [mm] 3.10 3.58 4.17 4.88
p: thread [mm] 1.4 1.6 1.8 1.8
l: lengths [mm] 13 - 38 13 - 38 19- 75 19 - 25
Installation bit code (hexagonal magnetic bit)
BOCA007 BOCA008 BOCA008 BOCA010
Drill capacity [mm] 1.75 - 3.00 1.75 - 4.40 1.75 - 5.25 2.50 - 6.00
Stainless Steel A2.
For general plate-plate joints made of aluminum.
TECHNICAL DATA SHEET
SELF-DRILLING SCREW FIXINGS
Denomination: SELF-DRILLING SCREW FIXINGS Codes: ABE, ABEI, ARE, ABR, ABRBLE, NBR, ABRC, ABRCA2, ABRA2, ABA, FS, ABP, NBP, ABPC, ABPCA2, TAEZ, TAEN, BCPZ, BZPZBL, BCPN, BCPB, BCPA2, BIE, AUTO, BAUTO, RS.
Reference: FT BRO-en Date: 18/05/18 Revision: 11 Page: 10 of 23
3. ARE Self-drilling screw with reduced point and 8mm hexagonal head
Properties
Steel Zinc-plated coating Available in
different colours
Base material Properties
Plate assembly Plate profile Aluminium Hexagonal with
embossed washer Hexagonal with
embossed washer Reduced screw
point
2.1. Details
C ST 4.8 ST 5.5 ST 6.3
dk: washer head diameter [mm] 11 11 11
k: head thickness [mm] 4.45 5.45 5.45
c: washer thickness [mm] 1.15 1.25 1.25
s: spanner [mm] 8 8 8
D: exterior thread diameter [mm] 4.80 5.46 6.25
d: interior thread diameter [mm] 3.58 4.17 4.88
p: thread [mm] 1.6 1.8 1.8
l: lengths [mm] 16 - 19 22 20 - 80
Installation bit code (hexagonal magnetic bit) BOCA008 BOCA008 BOCA008
Maximum drill capacity [mm] 0.0 - 1.0 1.0 - 1.5 1.0 - 1.5
Zinc-plated finish.
Low thickness plate-plate joints, up to 1.5 mm. The point performs a prior drill-hole with a smaller diameter. The thread, with a greater diameter, creates an extrusion in the plate, lengthening and strengthening the threaded area.
Drill following the upper part of the rpm range from the table in section 5.
Versions with assembled EPDM washer for sealed joints in façades and roofing (consult ARVUL Technical Data Sheet).
TECHNICAL DATA SHEET
SELF-DRILLING SCREW FIXINGS
Denomination: SELF-DRILLING SCREW FIXINGS Codes: ABE, ABEI, ARE, ABR, ABRBLE, NBR, ABRC, ABRCA2, ABRA2, ABA, FS, ABP, NBP, ABPC, ABPCA2, TAEZ, TAEN, BCPZ, BZPZBL, BCPN, BCPB, BCPA2, BIE, AUTO, BAUTO, RS.
Reference: FT BRO-en Date: 18/05/18 Revision: 11 Page: 11 of 23
4. AUTO Self-drilling screw for girders - screw point no.5 - hexagonal head
Properties
Steel Zinc-plated coating Available in
different colours
Base material Properties
Plate assembly Plate profile IPN Hexagonal with
embossed washer Hexagonal with
embossed washer Girder screw
point
3.1. Details
Code M 5.5
dk: washer head diameter [mm] 11
k: head thickness [mm] 5.3
c: washer thickness [mm] 1.15
s: spanner [mm] 8
Point #5
D: exterior thread diameter [mm] 5.5
d: interior thread diameter [mm] 4.6
p: thread [mm] 1.06
l: lengths [mm] 32 - 38
Installation bit code (hexagonal magnetic bit) BOCA008
Drill capacity [mm] 4.0 – 12.0
Zinc-plated finish.
For general plate-plate joints for thicknesses up to 12 mm.
Versions with assembled EPDM washer for sealed joints in façades and roofing (consult ARVUL Technical Data Sheet).
TECHNICAL DATA SHEET
SELF-DRILLING SCREW FIXINGS
Denomination: SELF-DRILLING SCREW FIXINGS Codes: ABE, ABEI, ARE, ABR, ABRBLE, NBR, ABRC, ABRCA2, ABRA2, ABA, FS, ABP, NBP, ABPC, ABPCA2, TAEZ, TAEN, BCPZ, BZPZBL, BCPN, BCPB, BCPA2, BIE, AUTO, BAUTO, RS.
Reference: FT BRO-en Date: 18/05/18 Revision: 11 Page: 12 of 23
5. ABR, NBR, ABR_BLE,
ABRA2 Self-drilling screw - Dome head - Ph socket
Properties Base material
Steel
Available in stainless
Plate assembly
Plate profile
Coatings Properties
Zinc-plated coating
Black zinc-plated White zinc-
plated Available in
different colours Ph Dome head Screw point
4.1. Details
Code ST 3.5 ST 3.9 ST 4.2 ST 4.8 ST 5.5
dk: head diameter [mm] 6.9 7.5 8.2 9.5 10.8
k: head thickness [mm] 2.60 2.80 3.05 3.55 3.95
Ph bit nº 2 nº 2 nº 2 nº 2 nº 3
R: head radius [mm] 5.4 5.8 6.2 7.2 8.2
D: exterior thread diameter [mm] 3.53 3.91 4.22 4.80 5.46
d: interior thread diameter [mm] 2.64 2.92 3.10 3.58 4.17
p: thread [mm] 1.3 1.3 1.4 1.6 1.8
l: lengths [mm] 9.5 - 32 13 - 32 13 - 50 13 - 120 19- 73
Installation bit code (Ph bit) PUPHC02 PUPHL02
PUPHC02 PUPHL02
PUPHC02 PUPHL02
PUPHC02 PUPHL02
PUPHC03 PUPHL03
Drill capacity [mm] 0.70 - 2.25 0.70 – 2.40 1.75 – 3.00 1.75 – 4.40 1.75 - 5.25
Zinc-plated (code ABR), white zinc-plated (code ABR_BLE) and black zinc-plated (code NBR) finishes.
A2 stainless steel version (code ABRA2) for use exclusively with aluminium (does not produce corrosion by galvanic coupling). Do not use screw in stainless steel to drill steel, as point will burn out due to lack of hardness.
TECHNICAL DATA SHEET
SELF-DRILLING SCREW FIXINGS
Denomination: SELF-DRILLING SCREW FIXINGS Codes: ABE, ABEI, ARE, ABR, ABRBLE, NBR, ABRC, ABRCA2, ABRA2, ABA, FS, ABP, NBP, ABPC, ABPCA2, TAEZ, TAEN, BCPZ, BZPZBL, BCPN, BCPB, BCPA2, BIE, AUTO, BAUTO, RS.
Reference: FT BRO-en Date: 18/05/18 Revision: 11 Page: 13 of 23
6. ABRC, ABRCA2 Self-drilling screw – Dome head – square socket
Properties
Steel Zinc-plated coating Available in
stainless
Base material Properties
Plate assembly Plate profile Aluminium Square socket Dome head Screw point
5.1. Details
Code ST 3.5 ST 3.9 ST 4.2 ST 4.8 ST 5.5
dk: head diameter [mm] 6.9 7.5 8.2 9.5 10.8
k: head thickness [mm] 2.60 2.80 3.05 3.55 3.95
Squarebit nº 1 nº 1 nº 2 nº 2 nº 3
R: head radius [mm] 5.4 5.8 6.2 7.2 8.2
D: exterior thread diameter [mm] 3.53 3.91 4.22 4.80 5.46
d: interior thread diameter [mm] 2.64 2.92 3.10 3.58 4.17
p: thread [mm] 1.3 1.3 1.4 1.6 1.8
l: lengths [mm] 9.5 - 32 13 - 38 13 - 50 13 - 100 19- 73
Installation bit code (square bit) PUCUC01 PUCUL01
PUCUC01 PUCUL01
PUCUC02 PUCUL02
PUCUC02 PUCUL02
PUCUC03 PUCUL03
Drill capacity [mm] 0.70 - 2.25 0.70 – 2.40 1.75 – 3.00 1.75 – 4.40 1.75 - 5.25
A2 stainless steel version (code ABRA2) for use exclusively with aluminium (does not produce corrosion by galvanic coupling). Do not use screw in stainless steel to drill steel, as point will burn out due to lack of hardness.
Zinc-plated finish (code ABRC).
Grooves in the lower part of head which guard against rotation.
TECHNICAL DATA SHEET
SELF-DRILLING SCREW FIXINGS
Denomination: SELF-DRILLING SCREW FIXINGS Codes: ABE, ABEI, ARE, ABR, ABRBLE, NBR, ABRC, ABRCA2, ABRA2, ABA, FS, ABP, NBP, ABPC, ABPCA2, TAEZ, TAEN, BCPZ, BZPZBL, BCPN, BCPB, BCPA2, BIE, AUTO, BAUTO, RS.
Reference: FT BRO-en Date: 18/05/18 Revision: 11 Page: 14 of 23
7. ABA / ATA Self-drilling screw with two-wing screw point – countersunk head – Ph/Tx socket
Properties
Steel Zinc-plated coating Wood - Steel
Properties
Ph / Tx Countersunk head Two-wing screw
point
6.1. Details
CODE ABA ATA
Diameter ST 4.8 ST 5.5 ST 6.3 ST 4.8 ST 5.5 ST 6.3
dk: head diameter [mm] 9.50 10.80 12.40 9.50 10.80 12.40
K: head thickness [mm] 3.15 4.27 4.81 3.15 4.27 4.81
Drill length [mm] 10 12 13 10 12 13
D: outer thread diameter [mm] 4.80 5.46 6.25 4.80 5.46 6.25
d: inner thread diameter [mm] 3.58 4.17 4.88 3.58 4.17 4.88
p: pitch [mm] 1.6 1.8 1.8 1.6 1.8 1.8
l: screw length [mm] 32 - 50 38 - 65 60 - 85 32 - 50 38 - 65 50 - 100
Installation bit code (Ph) PUPHC02 / PUPHL02 PUTO025 PUTO025 PUTO030
Recess PH2 PH2 PH2 T25 T25 T30
Drill capacity [mm] 1.75 - 4.00 1.75 - 5.00 2.50 - 6.00 1.75 - 4.00 1.75 - 5.00 2.50 - 6.00
TECHNICAL DATA SHEET
SELF-DRILLING SCREW FIXINGS
Denomination: SELF-DRILLING SCREW FIXINGS Codes: ABE, ABEI, ARE, ABR, ABRBLE, NBR, ABRC, ABRCA2, ABRA2, ABA, FS, ABP, NBP, ABPC, ABPCA2, TAEZ, TAEN, BCPZ, BZPZBL, BCPN, BCPB, BCPA2, BIE, AUTO, BAUTO, RS.
Reference: FT BRO-en Date: 18/05/18 Revision: 11 Page: 15 of 23
Zinc-plated finish.
For joining wood (thickness > 12 mm) and plates (> 1.75 mm). The two wings at the point perform a pre-drill hole in the wood to prevent the thread from dulling and the wood from cracking in the area of the drill hole.
Grooves in the lower part of head which directly countersink wood, melamine and other materials, at the same time as guarding against rotation.
For wood – metal fixings when wood thickness is greater than 12 mm a hole is required in the wood with a space which prevents the starting of threading in the wood before finishing drilling the metal. Otherwise the screw point may burn out, the wood may break or, in some cases, there may be ungluing of the wood – metal joint. To avoid this, one of the following options must be taken:
Pre-drill the wood, with a drillhole of a greater diameter than the thread.
Use an extra-long screw point (not usually sold)
Use a two-wing point screw: a bore is produced in the wood with a greater diameter than that of the thread, so that this does not come into contact with the wood. The wings will break when they come into contact with the metal and the edge threads in it. Fixing with wood thickness ≤ 12 mm Fixing with wood thickness > 12 mm with conventional point screw
Solution 1: extra-long point screw Solution 2: Two-wing point screw. a) drilling of wood b) wood boring + metal boring c) threading in metal
TECHNICAL DATA SHEET
SELF-DRILLING SCREW FIXINGS
Denomination: SELF-DRILLING SCREW FIXINGS Codes: ABE, ABEI, ARE, ABR, ABRBLE, NBR, ABRC, ABRCA2, ABRA2, ABA, FS, ABP, NBP, ABPC, ABPCA2, TAEZ, TAEN, BCPZ, BZPZBL, BCPN, BCPB, BCPA2, BIE, AUTO, BAUTO, RS.
Reference: FT BRO-en Date: 18/05/18 Revision: 11 Page: 16 of 23
8. FS Metal-wood roofing screw
Properties
Steel Zinc-plated coating Available in
different colours
Base material Properties
Metal plate - Wood Hexagonal with
embossed washer Hexagonal with
embossed washer Reduced screw
point
7.1. Details
Code ST 4.8 dk: washer head diameter [mm] 10
k: head thickness [mm] 4.9
c: washer thickness [mm] 1.1
s: spanner [mm] 8
D: exterior thread diameter [mm] 4.80
d: interior thread diameter [mm] 3.30
p: thread [mm] 2.1
l: lengths [mm] 19 – 35
lG: maximum thread length [mm] Complete
Installation bit code (hexagonal magnetic bit) BOCA008
Drill capacity [mm] 1.50 max
Zinc-plated finish with lacquered head and washer.
For use in metal-wood fixings.
TECHNICAL DATA SHEET
SELF-DRILLING SCREW FIXINGS
Denomination: SELF-DRILLING SCREW FIXINGS Codes: ABE, ABEI, ARE, ABR, ABRBLE, NBR, ABRC, ABRCA2, ABRA2, ABA, FS, ABP, NBP, ABPC, ABPCA2, TAEZ, TAEN, BCPZ, BZPZBL, BCPN, BCPB, BCPA2, BIE, AUTO, BAUTO, RS.
Reference: FT BRO-en Date: 18/05/18 Revision: 11 Page: 17 of 23
9. ABP, NBP Self-drilling screw – countersunk head – Ph socket
Properties
Steel Zinc-plated coating Black zinc-plated
Base material Properties
Plate assembly Metal profile Ph Countersunk head Screw point
8.1. Details
Code ST 3.5 ST 3.9 ST 4.2 ST 4.8 ST 5.5
dk: head diameter ≤ [mm] 6.8 7.5 8.1 9.5 10.8
k: head thickness [mm] 2.1 2.3 2.5 3.0 3.4
Ph bit nº 2 nº 2 nº 2 nº 2 nº 3
Head countersink angle º 80 80 80 80 80
D: exterior thread diameter [mm] 3.53 3.91 4.22 4.80 5.46
d: interior thread diameter [mm] 2.64 2.92 3.10 3.58 4.17
p: thread [mm] 1.3 1.3 1.4 1.6 1.8
L: lengths [mm] 9.5 - 25 13 - 38 13 - 38 13 - 50 19 - 50
Installation bit code (Ph) PUPHC02 PUPHL02
PUPHC02 PUPHL02
PUPHC02 PUPHL02
PUPHC02 PUPHL02
PUPHC03 PUPHL03
Drill capacity [mm] 0.70 - 2.25 0.70 - 2.40 1.75 - 3.00 1.75 - 4.40 1.75 - 5.25
Zinc-plated (code ABP) or black-zinc-plated (code NBP) finish.
For metal-metal fixings where the screw is required to be level with the material to be fixed. Requires prior countersinking.
TECHNICAL DATA SHEET
SELF-DRILLING SCREW FIXINGS
Denomination: SELF-DRILLING SCREW FIXINGS Codes: ABE, ABEI, ARE, ABR, ABRBLE, NBR, ABRC, ABRCA2, ABRA2, ABA, FS, ABP, NBP, ABPC, ABPCA2, TAEZ, TAEN, BCPZ, BZPZBL, BCPN, BCPB, BCPA2, BIE, AUTO, BAUTO, RS.
Reference: FT BRO-en Date: 18/05/18 Revision: 11 Page: 18 of 23
10. ABPC Self-drilling screw – countersunk head – square socket
Properties
Steel Zinc-plated coating Available in
stainless
Base material Properties
Plate assembly Plate profile Square socket Countersunk head Screw point
9.1. Details
Code ST 3.5 ST 3.9 ST 4.2 ST 4.8 ST 5.5
dk: head diameter ≤ [mm] 6.8 7.5 8.1 9.5 10.8
k: head thickness [mm] 2.1 2.3 2.5 3.0 3.4
Square bit nº 1 nº 1 nº 2 nº 2 nº 3
Head countersink angle º 80 80 80 80 80
D: exterior thread diameter [mm] 3.53 3.91 4.22 4.80 5.46
d: interior thread diameter [mm] 2.64 2.92 3.10 3.58 4.17
p: thread [mm] 1.3 1.3 1.4 1.6 1.8
L: lengths [mm] 13 - 25 19 - 38 16 - 38 13 - 50 19 - 50
Installation bit code (Square drill)
PUCUC01 PUCUL01
PUCUC01 PUCUL01
PUCUC02 PUCUL02
PUCUC02 PUCUL02
PUCUC03 PUCUL03
Drill capacity [mm] 0.70 - 2.25 0.70 - 2.40 1.75 - 3.00 1.75 - 4.40 1.75 - 5.25
Zinc-plated finish (code ABPC) and A2 Stainless steel version (code ABPCA2) for use exclusively with aluminium (does not produce corrosion by galvanic coupling). Do not use screw in stainless steel to drill steel, as point will burn out due to lack of hardness.
For metal-metal fixings where the screw is required to be level with the material to be fixed.
Requires prior countersinking.
With 4 grooves in the lower part of head which directly countersink wood, melamine and other materials, at the same time as guarding against rotation.
TECHNICAL DATA SHEET
SELF-DRILLING SCREW FIXINGS
Denomination: SELF-DRILLING SCREW FIXINGS Codes: ABE, ABEI, ARE, ABR, ABRBLE, NBR, ABRC, ABRCA2, ABRA2, ABA, FS, ABP, NBP, ABPC, ABPCA2, TAEZ, TAEN, BCPZ, BZPZBL, BCPN, BCPB, BCPA2, BIE, AUTO, BAUTO, RS.
Reference: FT BRO-en Date: 18/05/18 Revision: 11 Page: 19 of 23
11. TAEZ, TAEN Self-drilling screw – low dome head – Ph socket with embossed washer
Properties
Steel Zinc-plated coating Black zinc-plated
Base material Properties
Metal plate assembly Plate profile Ph Low dome head Screw point
10.1. Details
Code ST 4.2
dk: head diameter ≤ [mm] 11.17
Head thickness ≤ [mm] 2.55
Ph bit nº 2
k: point length 4.4 – 5.2
D: exterior thread diameter [mm] 4.22
d: interior thread diameter [mm] 3.10
p: thread [mm] 1.4
l: lengths [mm] 13 - 32
Installation bit code (Ph bit) PUPHC02 PUPHL02
Drill capacity [mm] 0.75 - 2.50
Zinc-plated (code TAEZ) or black zinc-plated (code TAEN) finish.
For use in fixings where an even distribution of pressure is required, without the need for assembling additional flat washers, and without the head protruding excessively:
o For fixing soft materials on metal (methacrylate, plastic, chipboard, thin metallic plates, etc). o Large or oversized holes.
TECHNICAL DATA SHEET
SELF-DRILLING SCREW FIXINGS
Denomination: SELF-DRILLING SCREW FIXINGS Codes: ABE, ABEI, ARE, ABR, ABRBLE, NBR, ABRC, ABRCA2, ABRA2, ABA, FS, ABP, NBP, ABPC, ABPCA2, TAEZ, TAEN, BCPZ, BZPZBL, BCPN, BCPB, BCPA2, BIE, AUTO, BAUTO, RS.
Reference: FT BRO-en Date: 18/05/18 Revision: 11 Page: 20 of 23
12. BCPZ, BCPN, BCPB,
BCPZ_BL, BCPA2 Self-drilling screw – extra-flat head – Ph socket
Properties Base material
Steel Available in
stainless Metal plate assembly
Plate profile
Coatings Properties
Zinc-plated coating
Black zinc-plated White zinc-
plated White head only
BCPZ__BL Ph Extra-flat head Screw point
11.1. Details
Code ST 4.2
dk: head diameter [mm] 8.0
k: head thickness [mm] 0.7
Ph bit nº 2
Point length [mm] 4
D: exterior thread diameter [mm] 4.22
d: interior thread diameter [mm] 3.10
p: thread [mm] 1.4
l: lengths [mm] 14 - 23
Head countersink angle º 65
Installation bit code (Ph bit) PUPHC02 PUPHL02
Drill capacity [mm] 0.7 - 2.0
Zinc-plated (code BCPZ), black zinc-plated (code BCPN) or completely white painted RAL 9010 (code BCPB) finishes.
Bevelled head to prevent snagging on sliding parts.
For joints on metal which require a low head (sliding doors and windows, inlaid locks, etc.).
May be used as a substitute for rivets in many applications, with the advantage of being removable.
Reduced cone under head to improve finish on flat surfaces.
A2 Stainless steel version (code BCPA2) for use exclusively with aluminium (does not produce corrosion by galvanic coupling). Do not use screw in stainless steel to drill steel, as point will burn out due to lack of hardness.
TECHNICAL DATA SHEET
SELF-DRILLING SCREW FIXINGS
Denomination: SELF-DRILLING SCREW FIXINGS Codes: ABE, ABEI, ARE, ABR, ABRBLE, NBR, ABRC, ABRCA2, ABRA2, ABA, FS, ABP, NBP, ABPC, ABPCA2, TAEZ, TAEN, BCPZ, BZPZBL, BCPN, BCPB, BCPA2, BIE, AUTO, BAUTO, RS.
Reference: FT BRO-en Date: 18/05/18 Revision: 11 Page: 21 of 23
13. RS Self-drilling screw - rivet head
Properties
Steel Zinc-plated coating
Base material Properties
Metal plate assembly Plate profile Aluminium Ph Extra-flat head Screw point
12.1. Details
CODE ST 3.5 ST 4.2 ST 4.8
dk: head diameter [mm] 6.7 8 9.3
k: head thickness [mm] 1.2 1.3 1.5
d: exterior thread diameter [mm] 3.5 4.2 4.8
p: thread [mm] 1.3 1.4 1.6
l: lengths [mm] 9 - 16 13 - 32 13 - 38
Ph bit nº 2 nº 2 nº 2
Installation bit code (Ph bit) PUPHC02 PUPHL02
PUPHC02 PUPHL02
PUPHC02 PUPHL02
Drill capacity [mm] 0.7 – 2.25 1.75 – 3.00 1.75 – 4.40
Self-drilling screw with reduced head height.
This reduced head height gives it special characteristics: o Avoids interference with moving elements. o Aesthetic finish as screw is rounded and is concealed once installed. o May be used as a substitute for rivets. o Wide range of thicknesses to be drilled - from 0.70 mm to 4.40 mm. o Wide range of measurements. o Cone between thread and head to ensure piece sits perfectly. o Complete thread. o Annular groove at the bottom of the head which allows the material originated in the drilling process to
stay in this area, allowing the screw to sit better.
TECHNICAL DATA SHEET
SELF-DRILLING SCREW FIXINGS
Denomination: SELF-DRILLING SCREW FIXINGS Codes: ABE, ABEI, ARE, ABR, ABRBLE, NBR, ABRC, ABRCA2, ABRA2, ABA, FS, ABP, NBP, ABPC, ABPCA2, TAEZ, TAEN, BCPZ, BZPZBL, BCPN, BCPB, BCPA2, BIE, AUTO, BAUTO, RS.
Reference: FT BRO-en Date: 18/05/18 Revision: 11 Page: 22 of 23
Drilling process, breaking shavings Perfect piece finish
Different views of the screw:
TECHNICAL DATA SHEET
SELF-DRILLING SCREW FIXINGS
Denomination: SELF-DRILLING SCREW FIXINGS Codes: ABE, ABEI, ARE, ABR, ABRBLE, NBR, ABRC, ABRCA2, ABRA2, ABA, FS, ABP, NBP, ABPC, ABPCA2, TAEZ, TAEN, BCPZ, BZPZBL, BCPN, BCPB, BCPA2, BIE, AUTO, BAUTO, RS.
Reference: FT BRO-en Date: 18/05/18 Revision: 11 Page: 23 of 23
COLOURS
All self-drilling screws may be supplied painted in the following options (RAL colour scheme codes):
Head only or head and EPDM washer o White RAL 9010 o Pyrenean white RAL 9002 o Oyster white RAL 9018 o Bidasoa cream RAL 1000 o Sand RAL 1001 o Ivory RAL 1015 o Copper RAL 1007 o Tile red RAL 3011 o Coral red RAL 3003 o Burgundy RAL 3005 o Blue RAL 5009 o Lake blue RAL 5019 o Navarre green RAL 6028 o Light green RAL 6021 o Moss green RAL 6005 o Metallic grey RAL 9006 o Grey RAL 7035 o Black RAL 9005
Measurements: from 3.9x13 to 6.3x140. Consult Sales Department for minimum quantity, price and delivery time. Farmer Screw (FS) Colours:
o Tile red RAL 3009 o Dark blue RAL 5010 o Olive green RAL 6005 o Light brown RAL 8004 o Dark brown RAL 8017 o Grey RAL 9006 o White RAL 9010 o Black RAL 9011
Fully painted o White RAL 9010 o Black RAL 9005 o Burgundy RAL 3005 o Moss green RAL 6005 o Blue RAL 5009
Measurements: from 2.9x6.5 to 5.5x 32. Minimum quantity: 15 kg Consult Sales Department for price and delivery time.
ATAP Codes: decorative plastic caps for 8 mm (ABE 4.8, ABE 5.5 and ARE) and 10 mm (ABE 6.3) hexagonal head screws. o Pyrenean white RAL 9002 o Oyster white RAL 9018 o Sand RAL 1001 o Tile red RAL 3011 o Coral red RAL 3003 o Navarre green RAL 6028 o Black RAL 9005