Sensitivity Measurement for progressive lens

User guide

Download the App from the App store (for iPad only, IOS 9 minimum).

STEP 01

Login with the password NikonLenswear100.

STEP 02

On the settings page, please select your country and your preferred language.

If needed, you can also refer to the user manual. (this requires internet access as it is hosted on a webpage out of the App)

STEP 03

Explain that this measurement is to identify the wearer’s vision preference and the viewing habits.

STEP 04

Share the instructions with the wearer and follow the recommended protocol. Press the «Next button» when ready to begin.

STEP 05

Select the equipment that the patient is wearing to begin the measurements.We recommend the trial frame with their latest prescription.

STEP 06

If you choose the trial lenses...

Trial lensesPart 1

Please sit at 1 meter to begin measuring the far vision sensitivity value.

Under special circumstances, you may change the distance if the patient cannot read well.

Trial lensesPart 2

Click on the side of the images, spending no longer than 3 seconds per image. Select the image that the wearer identifies as the one that starts become defined.

Trial lensesPart 3

Please sit at 40 centimeters to begin measuring the near vision sensitivity value.

Under special circumstances, you may change the distance if the patient cannot read well.

Trial lensesPart 4

Click on the side of the images, spending no longer than 3 seconds per image. Select the image that the wearer identifies as the one that starts become defined.

Trial lensesPart 5

If you choose the existing equipment…

Existing equipmentPart 1

Add the current prescription.

Existing equipmentPart 2

Add the newest prescription.

Existing equipmentPart 3

Please sit at the recommended distance to begin measuring the far vision sensitivity value.

Under special circumstances, you may change the distance if the patient cannot read well.

Existing equipmentPart 4

Click on the side of the images, spending no longer than 3 seconds per image. Select the image that the wearer identifies as the one that starts become defined.

Existing equipmentPart 5

Please sit at the recommended distance to begin measuring the near vision sensitivity value.

Under special circumstances, you may change the distance if the patient cannot read well.

Existing equipmentPart 6

Click on the side of the images, spending no longer than 3 seconds per image. Select the image that the wearer identifies as the one that starts become defined.

Existing equipmentPart 7

Select in the drop-down list the previous design of the wearer by selecting the brand and the product name.Select 1st time progressive lens wearer or Other/Unknown, if necessary.

STEP 07

Present the results to the wearer by showing not only the benefits of having his own unique design but also the difference between a conventional progressive lens and the SeeMax Ultimate lens.

STEP 08

The indicated value on this page must sent to Nikon when ordering the lenses.Note: there is no good or bad result. The positive and negative signs only refer

to the patient being more or less affected by aberrations.

STEP 09