sensors-systems-software.pdf

8/9/2019 Sensors-Systems-Software.pdf

1/151

SENSORS, SYSTEMSAND SOFTWARE

MONITORING / SURVEYING / INFORMATION TECHNOLOGY

FOR INFRASTRUCTURE / MINING / INDUSTRY


2/15

2 3

CASE STUDY CITYRINGEN COPENHAGEN

Cityringen will be a completely new, fully automatic, driverless metro ring line due to be

opened in 2018. The ring line will be 15.5 km long and is situated under downtown

Copenhag en, the bridge quartersand Frederiksberg. It will have transfer facilities to the

existing metro stations at Kongens Nytorv and Frederiksberg. Furthermore, there will be

transfer facilities to the existing regional and commuter railway station at Kbenhaven Station,at sterport station and at Nrrebro station. In total, the ring line will consist of 17

underground stations with island platforms.

The client Metroselskabet awarded the construction contract to the Salini-led JV Copenhagen

Metro Team (CMT). CMT awarded the instrumentation and monitoring contract to SMT,

a company owned by GEODATA Ziviltechnikergesellschaft Austria and Angermeier Ingenieure

GmbH Germany. The monitoring database system KRONOS has been provided by

GEODATA Ziviltechnikergesellschaft Austria.

Urban tunnel projects, like the Cityringen,

are related with special geotechnical risks.

Most typically they are caused by poor

geological conditions, very low overburden

and existing structures in the influence zone

of the construction. To manage these risks,

an early detection and warning of unexpected

behavior of the affected geotechnical objects

(ground, structures like tunnel and buildings) are

mandatory. To accomplish this detection and

warning, the design and execution of a suitable

geotechnical monitoring program is necessary.This ca n only be ach ieved b y imple menting a

monitoring database system capable of collecting

monitoring results according to the monitoring

program from different sources in near real

time and to use the data after importing to the

database to check different alarm levels and the

monitoring frequency. In more detail, this means

specifying and performing a systematic and

continuous acquisition, processing and analysis of

monitoring data and information.

In order to handle this data explosion, tunnel

information systems and geo-databases have

been developed and already installed in various

projects. In contrast to most of these systems,

the KRONOS system developed by GEODATA

has the capability to connect (to) the different

theme-specific databases used by subcontractors

and, thus, to serve as a central data management

system through which can be accessed any kind

of digital data produced in the tunnel project.

This mak es poss ible th e imple mentatio n of

further useful functions and services supporting

tunnelling tasks such as machine control, tunnel

simulation, geological prediction, process

optimization, etc. where data from different

engineering disciplines must be combined andprocessed in an integrated way.

So, there is one integrated database system which

is the single source of truth for all monitoring data.

The KRONOS system has been up and running

since the start of the project in 2011 and has

delivered reliable results to the client and the

contractor.

Up to now, we have collected over 118 million

measurements.

3D Targets 39.000.000

Borehole Instruments 460.000

Water Level and Properties 62.000.000

Other geotechnical sensors 16.500.000

Imprint

Responsible for content:

Geodata Ziviltechnikergesellschaft mbH,

Hans-Kudlich-Strae 28, A-8700 Leoben

Responsible for layout:

http://www.tg-graphiczone.com

Images:

Cover picture: ARGE Koralmtunnel

KAT 2 (Strabag AG / Jger Bau GMBH)

Radlpastrae 129

8530 Deutschlandsberg

Further images: shutterstock:

Page 2-3 Amy Johansson

Page 16 Fedor Selivanov

Page 18 gyn9037

Page 21 Vereshchagin Dmitry

page 2 ....................... CASE STUDY COPENHAGEN

page 3 ....................... CONTENT

page 4-5 ....................... GEODATA END TO END SOLUTIONS

page 6-7 ....................... TARGETS AND MARKING MATERIAL

page 8-9 ....................... DAMOS

page 10-11 ....................... EUPALINOS

page 12-13 ....................... KRIOS

page 14-15 ....................... TAUROS SANDVIK

page 16-18 ....................... TAUROS TBM + CAMERA + TSC

page 19-21 ....................... KRONOS

page 22 ....................... SERVICES

page 23 ....................... OFFICES

CONTENT


3/15

4 5

GEODATA END-TO-END SOLUTIONSMADE TO MEASURE

For our customers, the comprehensive use of high-quality information that is availableanytime is usually the most decisive factor for successful project completion. The reliable

provision of such information is a key factor for controlling risk and ensuring safety and

economic efficiency. With GEODATA, our customers have an innovative partner at their

disposal that provides tailor-made, IT-based solutions and services. GEODATA we set the

standards for integrated information management.

FACTS

Independent of contractors and manufacturers

More than 200 highly qualified employees

Dedicated development departments for sensor technology,

metrology and software

International R&D network with universities

and research institutions

Branches in Europe and overseas

this has been our guiding principle for over

25 years. GEODATA is an industry leader in

surveying applications for geotechnics, structural

monitoring and environmental technology.

We are focused on industrial and plant surveying

as well as all surveying requirements for tunnelling

and underground construction. On the basis of

many years experience with project realisation,

we develop and sell guidance systems for tunnel

boring and mining machines as well as monitoring

and information systems.

Our high level of development competence,

gained both in-house and through cooperation

with international partners, means that we have

successfully positioned ourselves as a flexible,

application-orientated supplier offering a wide

range of innovative products and services.

TURNING DATAINTO INFORMATION

GEODATAFOCUSES ON:

Construction and maintenance of roads and

railways, subways, hydropower plants, tunnels,

caverns and shafts

Foundation engineering, slope protections,

landslides

Mining

Plant construction, industry and manufacturing

Based on many years experience as an

independent specialised company, GEODATA

assists private and public clients in sustainably

raising the quality of their products and

processes.


4/15

6 7

TARGETS ANDMARKING MATERIAL

HIGHLIGHTS:

Flexible and modular designed product line

Compatible with LEICA prisms

Gimballed mounting of the prisms and reflectors

Robust construction

Highly accurate CNC manufacturing

The GEO DATA reflec tor and marking system is a cos t-

effective and versatile product line for many geodetic

applications. It is particularly suited for applications like

displacement monitoring in tunnelling, due to the high

precision of the individual components. It can, however, also

be profitably deployed for many other surveying tasks.

FIELD OF APPLICATION

TECHNICAL SPECIFICATIONS

Prism-TargetRecording distance

Material

Reflector constant

Manufacturing Accuracy

From approx. 0.3m to 600m

Reflector support is made of plastic,mounted on universal joints and prismwith plastic mounting

18.2mm

+/-0.1mm

Monitoring Prism(for Rails and Structures, robust)

Recording distanceReflector constant

From approx. 0.3m to 600m18.2mm

Bireflex TargetRecording distance

Material

Reflector constant


From approx. 12m to 140m

The reflector support is plastic,mounted on universal joints withfoil coating on both sides

34.4mm

+/-0.1mm

Bireflex Target with integratedBreaking PointRecording distance

Material

Reflector constant


From approx. 12m to 140m

The reflector support is plastic,mounted on universal joints withfoil coating on both sides

34.4mm

+/-0.1mm

Convergence Bolt, R3/8 malethreadMaterial

Description

Tenax Tx 55, galvanizedR 3/8 male threadsStandard length 250mm(other length on demand)

Convergence Bolt withWild AdapterMaterial

Description

Tenax Tx 55, galvanizedwith Wild AdapterStandard length 250mm(other length on demand)

Blast Protection Ring forConvergence BoltMaterialDescription Protects the convergence bolts during

blasting and shotcreting

Protective Cap for R 3/8Convergence BoltMaterialDescription

PVCProtects the Convergence Bolt thread

Adapte r wit h Break ing Point forR 3/8 Convergence BoltMaterialDescription

PVCCan be used in combination with bireflextarget

Wall b olt w ith M 8 thre adMaterial

PVC, brass and niro

Adapte r for M8 wal l boltMaterial

Description

PVC

For mounting of targets on wall bolts


5/15

8 9

DATA ACQUISITION& MONITORING SYSTEM

HIGHLIGHTS BENEFITS

Compatible with all common sensor

technologies

Digital sensors support

Configurable to customer requirements

according to sensor types, communication

protocols and power supply

Rugged construction for harsh environment

Applicable for small to major projects

Various communication platforms available

Combinable with K RONOS Tunnel Information

System

GENERAL DESCRIPTION

DAMOS is designed to be a simple, user-friendly,

accurate and robust data acquisition system

for monitoring sensors usually installed onconstruction sites.

The sys tem is a ble to capture data fr om all

common geotechnical sensor technologies such

as digital sensors (i.e. IPIs and tilt meters), digital

hydraulic levels, laser alignment sensors and

many more.

CONCEPT

The data acquisit ion syst em DAMOS compris es

the complete monitoring and data processing

chain, beginning with various sensor types, the

cabling, sensor interfaces with multiplexers,

amplifiers, signal c onditioners, microprocessors

and bus interfaces as well as data transmission

devices, data collecting, evaluation and

presentation software. DAMOS can be divided

into four main components or layers, which canbe configured widely according to the requirement

of the customer.

Sensor layer:

This laye r compr ises, f or examp le, cab led

sensors like VW strain gauges, potentiometric

displacement transducers, loadcells or any

4-20mA transducers.

Geodata IPIs or tilt sensors, as well as hydraulic

levels or laser alignment sensors with digital

outputs can directly be connected to the interface

layer.

Interface layer:

The inte rface layer co ntains c omponent s to

convert sensor signals to a predefined common

format, like analogue to digital converters,

VW interfaces, multiplexers or digital protocol

converters. These interfaces, capable to capture

1 to 64 sensors, depending on type and customer

requirements, are connected to each other within

a RS485 bus system. DAMOS is able to address

250 sensor interfaces.

Transmission or communication layer:

This lay er conn ects t he busb ased int erface s with

a central logging PC. This connection could be

a direct, cable based link, a WAN connection via

EDGE/GPRS or UMTS, a fibre optic cable or a

dedicated radio communication.

Software layer:

The Windo ws based softwar e compr ises a SQL

Database and a handy, easy understandable user

interface. The DAMOS-software provides sensor

and interface management, online visualisation

of reduced and raw data, generation of reports,

alarm handling via SMS, e-mail or TCP-IP device

servers.

The DAM OS SQL- database can eas ily be

connected with KRONOS to form the ideal solution

for extensive monitoring networks, with the aim to

merge worldwide allocated monitoring programs to

one central location, in order to provide a sec ure

data backup, intime distribution of information and

efficient maintenance.

16 channel VW-Interface DAMOS-PC with RS485 and UMTS

DAMOS


6/15

10 11

HIGHLIGHTS:

Offers all the computations required for

underground construction

Administration of all relevant planning data

User-friendly and clear menu structure

Many data interfaces

(KRONOS Monitoring Database System)

Numerous online functions for the control of

total stations (ATS)

Extensive graphic functions

BENEFITS:

Management of all necessary planning data such

as axes in the ground plan and vertical projection,

standard cross sections, profile points, etc.

Powerful equalisation module for the calculation of

position and/or elevation networks with automatic

computation of approximation coordinates and

error finding algorithms for correction of allocation

errors (point number confusions, etc.)

Extensive possibilities for net datum through

transformation and soft positioningand

differentiated weighting approaches

DATA MANAGEMENT

-Differentiated management of points in

accordance with their purpose

-Extensive management functions for reference,

object and profile control points

-ASCII data interfaces for input and output of large

quantities of data

-2D and 3D transformations

-Transfer of points from and to the total station f or

direct setting-out

EUPALINOS TUNNELSURVEYING SOFTWARE

TUNNEL HEADING CONTROL

-Profile recording manually (without reflector or with

profiled disk), program controlled via total station

or online via an industrialised control computer

-Strict orthogonal profile recording for expansion

sections

-Use of arbitrary reference lines within a profile

-Automatic consideration of lay-by sections through

profile interpolation

-Calculation of over and underexcavation (cubature)

-Graphical output via meta plot files or PDF (for

e-mail dispatch)

ANALYSIS

-Fully automatic analysis of tachymetric

measurements and levelling by means of a

special coding system

-Automatic allocation of point numbers (not

necessary to enter the correct point numbers of

the reference points)

-Differentiated treatment of position and/or fixed

elevation points with respect to their accuracy,

in the course of the analysis

-Determination of the locations through free

stationing (1D, 2D or 3D)

-Analysis of complex geotechnical measuring

arrangements with several instrument positions

via strict compensation for position and

elevation

-Graphical representation of observation

configurations (network plots with error e llipses)-Detailed record of the calculations

-Fully automated storage of the results in the

database through allocation of corresponding

measuring codes

-Powerful equalisation module for the calculation

of position and/or elevation networks with

automatic computation of approximation

coordinates and error finding algorithms for

correction of allocation errors (point number

confusions, etc.)

-Extensive possibilities for net datum through

transformation and soft positioning and

differentiated weight approaches

-Combination of trigonometric and levelling

networks, incorporating gyroscope azimuths

and plumbing, for strict net adjustments of net

sections above and below ground (shafts)

PROGRAM DESCRIPTION

General

-Project-related data organisation

-Arrangement of all functions in clear menus

-Implementation of the functions via user-friendly

dialogues

-Numerous ASCII interfaces for data input and

output

-Management of all plan data (axes, standard

cross sections etc.) and parameters

-Testing the plan data (axis elements) for

consistency

-Visualisation of the plan data (profiles and

axes)

-Checking of the axes data via integrated

alignment calculations

-High-performance functions for handling of

standard cross sections (interpolation, profile

offset, etc.)

-Preparation of all graphics (displacement

diagrams, profile checks, etc.) via meta files (->

placing on-site networks or dispatch via e-mail) or

in WMF or PDF format

-Easy and simple analysis of trigonometric and

levelling observations

-Automatic allocation of point numbers during

analysis to facilitate and speed up surveying

work

-Analysis and graphical preparation of profile

checks, including cubature calculations

-Extensive setting-out functions for excavation and

inner lining (e.g. conventional laser cut-off, block

gap calculation, 3D setting-out of profile related

points)

-Analysis of geotechnical measurements with

respect to time vs cross-section and tunnel

advance


7/15

12 13

GEOROBOTAUTOMATIC 3D DEFORMATIONMONITORING SYSTEM

HIGHLIGHTS:

Fully Automatic 3D Monitoring & Data Analysis

Extensive Alarming Options

Simple Hardware Setup and Intuitive Software

3D Measurements (with Prisms) or 1D Measurements (Reflectorless, Surface)

Multi Station Network Capabilities

KRONOS Link for Extensive Filtering, Data Management & Analysis

Motorised Total Station

A look inside a Georobot PC

Geodata Monitoring Prism


Automatic measurements of 3D displacements

are required wherever objects and landscapes are

under threat and need to be monitored, but where

manual single measurements fall short because of

the required measuring frequency or an inaccessible

location.

This is often the case in the inner city, e.g. when

subways are built or where unstable slopes must be

monitored.

The GEODATA GeoRobot system consists of modular

hardware which is fitted to the monitoring task and

easy-understandable software which is used for

measurement configuration and data management.

SYSTEM COMPONENTS Motorised Total Stations: TOPCON/SOKKIA or LEICA

TS capable of performing reflectorless measurements (for 1D displacementmeasurements)

Geodata Monitoring Prisms for 3D Monitoring

Industrial PC with Power Supply Unit

Data Transfer Unit: Cable (up to 200m) or Wireless Data Transmission.

EUPALINOS Software for Data Acquisition and Processing

Optional: KRONOS Database Software for complete monitoring evaluation

Depending on the customers

needs, we offer automatic

reporting as well as extensive

alarming functionallity whichranges from notifications via email

or SMS to audio-visual alarming

with horns or lights, etc.

Naturally, alarm observation

parameters cover not just absolute

deviations but also observation of

changes within a certain peroid of

time (change of gradient).

Depending on the configuration,

output of diagrams and the

triggering of various alarm

procedures are handled locallyby the EUPALINOS software, or

centrally by the KRONOS database

system.

MONITORING - REPORTING - ALARMING


8/15


9/15


10/15

18 19

GENERAL DESCRIPTION

The con tinuous acquisit ion of the cur rent

machines position is based on measurements

taken from a total station, which is connected

to the PLC via Bluetooth radios. The total

station is mounted on a bracket at the back of

the tunnel and measures and tracks two motor

targets which are mounted on the machine. At an

arbitrary interval, an automatic orientation check

WORKING PRINCIPLE

The hard ware is c ompleme nted by straight forward

software.

TunnelEdit or is us ed for alignmen t, prof ile and

data management and is operated by the on-site

surveyor. TaurosOnline is used onboard to control

the guidance system components and their

operations, to perform data processing and data

transfer.

On top of TaurosOnline, Sandvik adds its own

vizualisation which displays the cutterhead, the

profile geometry and some additional information.

is performed to a backsight prism.

Several additional machine sensors are added

into the calculation process to determine thecutter heads position in the project coordinate

system with high accuracy.

All operations are carried out automatically. The

automatic observation of thresholds reduces the

operators workload even more and informs theuser of possible problems.

TAUROS GUIDANCE SYSTEM FORSANDVIK ROADHEADERS

BENEFITS OF AN INTEGRATED SYSTEM

The control software communicates with

integrated on-board sensors and software

components and, by this way, any redundant

hardware installations are avoided.

All sensors are factory installed and calibrated,

subsequent calibration can be done on site.

Advanced features of roadheader control

system become available (e.g. auto stop swing

on profile boundary).

All machine operating data relevant to the

operator is displayed on a single screen.

Support for the entire product through single

commercial partner

HIGHLIGHTS:

Fully Automatic Positioning of the Roadheader

Deep Integration of the Guidance System into the Machine Control System

Clear and Intuitive User Interface All Information on a Single Screen

Office Software for Data Management (Tunnel Alignment, Profiles, System Settings)

Display of the Current Profile and the Maximum Reach for Easy Repositioning

High Accuracy Reduces Risk of Under/Overcutting of the Profile

When using flexible excavation machines such

as Sandvik roadheaders, the ability to exactly

and efficiently excavate a desired profile without

compromising advance rates by frequent

repositioning and tentative excavation can only be

achieved by the use of exact geodetic guidance and

integrated profile management.

Tauros for roadheaders is a guidance system which

is jointly developed by Sandvik and Geodata.

In contrast to other roadheader guidance systems,

all hardware and software components are highly

integrated into available roadheader on-board

components. This deep integration of the guidance

system into the general machine control system

yields a variety of benefits for the customer.

Backside prism for

orientation control

Total Station with radio

box and remote radio

Motor Target

Operators screenHorizontal angle sensor

for cutterhead arm

Vertical angle sensor

for cutterhead armElongation sensor for

cutterhead arm

2-axis inclinometer

(pitch/roll)

PC for data processing;

local radio + external antenna


11/15

20 21

GENERAL DESCRIPTION

Successful tunneling with TBMs demands a

guidance system of the best quality and the

highest achievable accuracy.

TAUROS TBM is a bra nd-new develop ment by

Geodata which offers just that and much more.

The gui dance s ystem c onsists of seve ral sens ors

and measurement systems which are equipped

with the latest technology and which are

influenced by more than 25 years of experience in

tunneling. These sensors and systems are linked,

providing a position determination of the TBM

with high accuracy which results in a high-quality

tunneling process.

TAUROS TBM is built up modu larly. It can be used

on Single Shield TBMS as well as Double Shield

TBMs b y addin g the ro bust c amera mea surement

unit. The fully automatic tail skin clearance ( TSC)

measurement system in combination with the

ring sequencing module enable the automatic

calculation of the best fitting ring and ensure an

optimum ring sequence, therefore saving time and

reducing the risk of damages to the shield.

A continuous display of the c urrent position

and heading of the TBM is the main task of

this system. Additional data and information

necessary for operating and guiding the

machine is displayed within an intuitive and

straightforward user interface which demands

only limited user interaction.

TAUROS GUIDANCESYSTEM FOR SINGLE &DOUBLE SHIELD TBMs

GHLIGHTS:

ar and Intuitive User Interface with Touchscreen Operation

y Automatic TSC Measurement System

g Sequencing Module for Calculation of Best Fitting Ring

ust Camera Measurement Unit

gle and Double Shield Mode

mi-automatic Correction Curve Calculation

Tauros TB M: Gui dance S ystem Compone nts

CAMERA MEASUREMENTUNIT FOR DOUBLE

SHIELD TBMs

The ca mera meas urement unit is used f or Doub le

Shield TBMs to complement the basic guidance

system.

The sys tem con sists of a camera which i s

mounted on the gripper shield and a target which

is mounted on the front shield. The camera

acquires an image of the target and determines

the vertical and horizontal offset between the two

shields.

Additional information such as the length of the

push jacks is added in order to determine the 3D

position of the front shield.

The adva ntages a re obviou s.

There i s no dir ect lin e of s ight fr om the t otal

station up to the front shield needed any longer.

The sys tem can be mount ed bas ically anywhere

on the shield. This setup is both space and cost-

saving.

The eas y setup and sim ple two -step c alibration

make this the ideal alternative to conventional

guidance systems.

Camera Target

Reference Target

TSC Sensor

Motor Target

Camera Two Axis Inclinometer

Interface Unit

Total Station with Radio Boxand Power Supply

FRONT SHIELD GRIPPER SHIELD

PC with Touch Screen,

Radio and Software

TAUROS TBM

OPERATORS CABIN TUNNEL BACKWARD

Push Jacks Thrust Cylinders


12/15

22 23

TSC MEASUREMENTSYSTEM & RING

SEQUENCING

The new ly deve loped Tail Skin Cl earance (TSC)

Measurement system consists of industrial

ultrasonic sensors which are mounted within

the tail skin. The sensors measure the tail skin

clearance automatically and directly.

The rin g seque ncing module t hen use s these

measurements and adds the current position of

the machine, the length of the thrust cylinders

and the position of the previous rings to calculate

the optimum next ring.

Important information such as the current lead

of the ring and the TSC are displayed graphically

and numerically. This whole process happens

literally within seconds and therefore reduces the

operators workload drastically.

TailskinTSC

Sensor

TSC Sensor

30mm

15mm

28mm

38mm

31mm

45mm

39mm

Segment

TSC

Functional Principle of the TSC System

KRONOS TUNNELINFORMATION SYSTEM

GEOTECHNICAL, STRUCTURAL AND ENVIRONMENTALMONITORING DATABASE


Todays qua lity re quiremen ts in un derground

construction demand the eff icient administration

and documentation of all data essential. Immediate

availability and clear visualisation and presentation of

data are the premises to deliver high-quality projects ofdifferent scales.

But it is not only the collection of monitoring data, all

related project data from building condition surveys

to data and reports from geological and geophysical

site investigation are available in KRONOS and turn

KRONOS into a powerful project management tool.

Clients and contractors of some of the most

outstanding infrastructure projects rely on the

functionality and features of KRONOS and use it as

monitoring database system and valuable source of

project information.

KRONOS provides a graphical user interface (GUI) that

allows quick and easy interpretation and visualisation

of a large amount of instrumentation and survey data

in relation to construction progress info from many

different sources. No matter the scale of the project -

KRONOS will improve the efficiency and effectiveness

of the geotechnical, structural and environmental

monitoring works.

HIGHLIGHTS:

Well-proven performance record in small, medium

and even in ultra-large projects

Modular design enables customized applications for

project or customer-specific tasks

Automatic data acquisition with open interfaces for

import and export of data

Comprehensive reporting and alarming functionsAccessible from anywhere using internet

Fully documented manual

BENEFITS:

Risk management tool: Control of alert and alarm limits,

monitoring frequencies

Project management tool: Configurable reporting, real-

time monitoring and construction progress information

from site

Quality management and process c ontrol tool

Data management tool: one single platformHigh availability: Server infrastructure for 24/7 operation

Secure Data Storage: Central and secure data archive


13/15

24 25

HIGHLIGHTS:

Tunnel Projects

Metro and Underground Structures

Railway Track Monitoring

Open Excavations

Slopes, Dams and Bridges

Hydro Power Projects

Mining

Building Demolition and Construction

Industrial Buildings

Harbours

FUNCTIONALITY

Data Storage-Modern and efficient rational database (MS SQL Server)

-Combination of data from different sources in a

consistent data scheme

-Storage of images, drawings, graphs, bore logs etc. by

integrated hierarchical data management system

-Traceability from data changes due to a history system

-User-specific allocation of access authorisation

Data Interfaces

-Manual and automatic data acquisition

-KRONOS Collect format for import and export of data

-Interface to Hermes service for secure data transmission

from automatic monitoring systems, TBMs and data

provided on FTP

-Interface for import and export of data (e.g. AGS,

UCIMS, Geoform, CSV, XLS, KML, TUGIS.NET, different

text formats)

-SQL Interface

-Web Interface

Analysis a nd Repor ting

-Generating, administrating and monitoring of measuring

and monitoring programs (Monitoring Plan Manager)

-Visualization of measuring data and related information

(construction progress, meteorological data)

-Integrated reporting functionality with export options in

different formats (XLS, PDF, CSV, KML)

-Report Manager for automatic creation of reports using

customized report templates (daily, weekly, monthly

reports)

Alarming

-Multiple alarm levels available

-Alarm notification targets will be informed by e-mail

or SMS (option) in case of exceeding thresholds or

malfunction of a monitoring system.

-Customized notification rules meeting the requirements

of project action plans

-Automatic report creation and creation of monitoring

schedules based on alarm state and construction

progress

AVAILABLE SERVICEPACKAGES

Local System

-Installation of KRONOS components (Client, Server,

Service) on standard PC (OS Windows 7 or higher)

-Installation of MSSQL Server 2012 Express edition

(limited database size and user access according to MS

restrictions)

-Setup of KRONOS database

-Basic KRONOS training

-Updates for KRONOS Client software upon request

Hosted System

-Project setup on Geodata servers in a high-available

data centre

-Monitoring of Servers and provision of backups

-KRONOS Client software and / or KRONOS WEB

-Automatic updates

-No limitations regarding number of users or sensors

-KRONOS support hotline

Project System

-Hardware design according to project requirements

-Setup of customized KRONOS system on site

-Monitoring of Servers and Services

-Provision of Database Manager

-Establishing of project data structure and organization

-Provision of Method Statements and Specifications

-Implementation of specific interfaces to TBM or Third

Parties

-KRONOS support hotline

-Automatic updates

REPORT EXAMPLES

OPERATION

KRONOS is available as Windows Client Application

(KRONOS Client with automatic update function) and

as WEB Client (KRONOS WEB), which is optimized for

the use of mobile devices.

Settlement Plan View Diagram


14/15

26 27

SERVICES

REFERENCES

INFRASTRUCTURE ANDMINING

With numerous commissions for complex

large-scale building p rojects, GEODATA has

acquired an outstanding level of competence in

surveying for tunneling and shallow underground

construction projects, especially in inner-city

environments as well as for slope protections,

foundation engineering and mining projects

Facts:

-More than 25 years of experience in tunnelconstruction

-More than 500 successfully completed projects

on all continents

-Specialist software developed by Geodata for

tunnel surveying and information management

-Development of customer-specific solutions

-Comprehensive consulting service

Our Services:

-Network and control surveys as well as

gyroscopic measurements

-Heading control and construction surveying

-Guidance systems for TBMs, shield machines,

roadheaders and continuous miners

-Motor laser systems for conventional tunneling

-Profile measurement systems and tunnel laser

scanning

-Optical 3D displacement measurements

-Geotechnical instrumentation

-Vibration and noise level measurements

-Automated surveying and monitoring systems

-Information management and visualization

INDUSTRIAL SURVEYING

Our highly qualified, enthusiastic employees offer

a broad range of services which ranges from

the 3D registration of plants to surveying and

monitoring all the way to the positioning and

precision alignment of machines

Facts:

-Worldwide competence in project completion

-Experienced staff with mechanical engineering

background

-State-of-the-art 3D precision measurement

systems

-Experience with developing and manufacturing

customer-specific measuring systems

Our Services:

-Industrial as-built documentation

-3D laser scanning and modelling

-Construction, plant and monitoring surveys

-Monitoring of shape and position tolerances

-Target pe rforman ce comp arisons for

construction data

SENSORS, SYSTEMS &SOFTWARE

The fac t that w e devel op our o wn soft ware in

close cooperation with our users and customers

allows us to administrate and transfer data in a

way that is practical and customer-orientated and

enabels us to present results accordingly.

Facts:

-End-to-end provider of all required components

-One-stop-shop: delivery, installation,

measurement completion, data transfer, data

evaluation

-Comprehensive software packages for data

management, evaluation and visualisation of

results

-System sale and rental

Our Products:

-Automatic 3D and distance measuring systems

-Levelling systems

-Reflectors and marking material

-Extensometers and fissurometers

-Inclinometers and inclination sensors

-Strain meters and pressure cells

-Anchor load cells and measuring anchors

-Piezometers and water level sensors

-Data acquisition

-Motor laser systems for heading control and

stake-out operations

-Guidance systems for tunnel boring machines

and roadheaders

-Automated measuring and monitoring systems

-Surveying software

-Geotechnical analysis software

-Tunnel in formation system

Leoben Headofce

GEODATA Ziviltechnikergesellschaft GmbH

GEODATA Informationstechnologie GmbH

GEODATA Messtechnik GmbH

Hans-Kudlich-Strae 28

A-8700 Leoben

Telefon: +43 (0)3842 26555-0

Fax: + 43 (0)3842 26555-5

[email protected]

GEODATA Informationstechnologie GmbHMessequartier Graz

Klosterwiesgasse 103b

A-8010 Graz

[email protected]

Branch ofces:

Austria


Tassilostrae 7

A-4642 Sattledt


Htteldorferstrae 85 / 4. Stock

A-1150 Wien

Europe:

GSM Geodata Hellas

Attika Eleftheriou Venizelou Odos 12 A

15127 Melissia Athen

Greece

GEODATA Ingenieurgesellschaft GmbH

Fnf Hfe

Theatinerstrae 8

80333 Mnchen

Germany

GEODATA Projekt d.o.o.

Hermanova 1V

HR-10000 Zagreb

Croatia

SMT-Denmark ApS

c/o Sonderjyllands Revision A/S

Torvegade 6

DK-6330 Padborg

Murphy Surveys Geodata JV

9 Devonshire Square,

London, EC2M 4YF

United Kingdom

Overseas:

GEODATA Andina Ltd.

GEODATA Andina S.A.

Av. Diagonal Paraguay n 403 Of.:42

Santiago Centro

Chile

www.geodatandina.cl

-Cityringen, Copenhagen Metro, Denmark

-Fildertunnel, Stuttgart 21, Germany

-S10, Tunnel Gtschka, Tunnel Manzenreith,

Austria

-Crossrail London, C430 Farringdon Station,

England

-Crossrail London, C410 Bond Street &

Tottenham Co urt Ro ad Statio n, Engla nd

-London Underground Vauxhall Station Upgrade

Project, London, England

-Koralmtunnel KAT2, Austria

-Edinger Stormwater Tunnel, CA, USA

-Bosrucktunnel 2nd tube, Austria

-Tunnel Fl eckbe rg, Germ any

-Pumped-storage plant Reieck II, Austria

-Oil storage caverns Padur, India

-Metro Budapest, line 4, Hungary

-Pfndertunnel 2nd tube, Austria

-Metro Thessaloniki, Greece

-Industrial surveying Voestalpine Donawitz,

Austria

-Paper machine PM3 Palm Paper Kings Lynn,

Great Britain

-Power plant construction Andritz Hydro, Austria

-Ore loading station SNIM, Mauretania

-HDPE plants, BHDT, South Korea

OFFICES, BRANCHOFFICES, PARTNERS


15/15

CONTACT

Leoben Head Office

GEODATA Group

Hans-Kudlich-Strae 28

8700 Leoben

Austria

Phone: +43 (0)3842 26555-0Fax: + 43 (0)3842 26555-5

Mail: [email protected]

www.geodata.com

sensors-systems-software.pdf

Documents