sentroid handheld analyser - plastics and polymers · 2018-04-26 · identification method...
TRANSCRIPT
analytikLtdT: +44 (0)870 991 4044 w E: [email protected] w www.analytik.co.uk
Key features of SentroID:w Handheld, rugged, lightweight unit w Rapid analysis in secondsw Simple and logical menu selectionw Point-and-shoot operationw Easy to usew Intuitive colour touch screenw Minimal training requiredw Non destructive testingw Fully programmable for customer applications
©2014 Analytik Ltd / Sentronic All rights reserved.
NIR Spectrum of Polystyrene collected with SentroID
In today’s environment of increased safety, quality and productivityrequirements the plastics and polymers industry needs to ensure that theright material is flowing swiftly across the many stations in the value chain.
State-of-the-art portable instruments such as SentroID enable companiesto gain competitive advantage by increasing the level and speed of testingat minimal cost. This lightweight equipment can be used wherever it’sneeded – when final products arrive at your facility, production field orrecycling site.
SentroID NIR analyser utilises classical methods for identification. Available and implemented methods include wavelength correlation, principal component analysis, and cluster based methods. For all methods the similarity of a measured near infrared spectrum for an unknown material is compared with spectra that are part of the identification method installed on the SentroID.
Applications:w Materials identificationw Incoming materials inspectionw Recycling of wastew Recycling of carpets and textilesw Quality Control and Assurancew Portable field use
SentroID is an easy to operate NIR handheld analyser for fast identificationand composition analysis of plastics and polymers.
SentroID Handheld AnalyserPlastics and polymers identification with NIR spectroscopySentroID Handheld Analyser
Technical SpecificationsTechnology Diode array based NIR spectrometer
Wavelength range 900 - 1700nm (11000 - 5800 wavenumbers)
Pixel 640
Spectral Resolution ca. 7nm (FWHM)
Temperature Range 15 - 35oC
Weight 1100g
Dimensions 230 x 80 x 42mm
Battery >8h (depending on frequency of use)
Power supply 24 VDC / 1.5A
Battery charging Internal charging
Reference Internal standard, no external standard required
System requirements PC with Windows XP or Windows 7
Interfaces w USB 2.0 (for optional connection to a PC)w WiFi (802.11 b,g,n) for iimediate protocol generation
and data storage
Scope of supply w SentroID systemw Robust transportation casew External power supply (24V 1.5A)
analytikLtdT: +44 (0)870 991 4044 w E: [email protected] w www.analytik.co.uk
1. Save time
SentroID delivers rapid and accurate results displayed in seconds, whilst delivering uncompromisingperformance and reliability.
2. Easy to use
The analyser is fully automated and requires no special training - making the point-and-shootoperation effortless from the first sample to the last.
3. Meet regulatory requirements
The SentroID can be a key solution to comply with all regulations by conforming the identity of plasticsand polymers materials as they arrive at your facility; at a production field or recycling site.
Why invest in SentroID?
©2014 Analytik Ltd / Sentronic All rights reserved.
SentroID Handheld AnalyserPlastics and polymers identification with NIR spectroscopy