separation and purification sciences division compound ...separation and purification sciences...

Separation and Purification Sciences Division

The 3M™ High Flow Filter Systemis a result of 3M's extensive filtration experience applied to delivering high flow filter technology in a compact design. For those customers whowant filtration efficiency and a small footprint, 3M High Flow filter system may be the right filtration solution.

Compound radial pleats. Applied to minimizing your footprint.

2

3M™ High Flow Filter System

www.3M.com/highflow

High flow capabilityThe 3M™ High Flow filter system is designed to accommodate flow rates of up to 500 gallons per minute (gpm) in a single 60” length filter cartridge. The result? Fewer filter elements to maintain your process flow requirements. In fact, 3M High Flow filter systems require as few as one-tenth the number of elements as conventional 2.5” outer diameter (OD) filter cartridges (see Figure 5).

3M High efficiency filter media in a compound radial Pleat structure3M innovation is at the heart of the 3M High Flow filter. A compound radial pleat design (see Figure 2) helps maximize the usable surface area of each filter. Blown microfiber forms the basis of the filter media, which is manufactured to tightly-controlled fiber diameter specifications, producing a media with absolute-rated particle retention characteristics. The 3M manufacturing process embosses the media to produce a more

Figure 1: 3M™ High Flow single round filter system

Figure 2: 3M™ High Flow Sanitary Design single round filter system

Figure 3: 3M compound radial pleat design

High performance media in an innovative design.

uniform pleat pattern, which, in turn, allows greater utilization of the media by evenly distributing the process fluid throughout the entire filter structure. This results in consistent particle retention in a compact, space-saving design. 3M High Flow cartridge’s polypropylene end caps, outer sleeve, and core protect the pleat structure integrity and provide a robust filter construction.

Compact system designFewer required filter cartridges combined with an outside-to-inside flow path reduces the size of housing required for your application. The 3M High Flow filter housing takes up as little as one-half the size of conventional 2.5” OD filter cartridge housings for a given flow rate. The result is lower capital investment costs and a compact footprint that saves valuable plant space (see Figure 5).

3


www.3M.com/highflow

Industries Applications

Municipal WaterGeneral IndustrialOil & GasChemicals & PetrochemicalsFood & BeverageElectronics

• Pre-RO Water• Process Waters• Wastewater & Reclaimed Waters• Injection & Produced Waters• DE Trap• Clarification• Amine Sweetening• Catalyst Protection/Recovery• Machine Coolants

Features Benefits

High Flow Capability per Cartridge (vs. conventional 2.5” diameter cartridges)

Fewer cartridges required, resulting in:• Reduced cartridge handling & disposal• Reduced filter change-out time• Less individual cartridge seal points, reducing chance of

fluid bypass

Compound Radial Pleat Design using 3M Blown Microfiber Polypropylene Media

• High filter loading capacity• Reproducible filter effluent quality throughout life of filter• Broad chemical compatibility

Compact System Design • Smaller housing minimizes capital expense requirements• Reduces system footprint

Easy to Use

• No special tools or hardware required for filter change-out• “Twist-to-lock” cartridge seating mechanism provides

positive seal• Ergonomic designed handle facilitates cartridge installation

and removal

FDA CFR-21 Listed Material • Compatible in applications requiring direct food contact in food and beverage processing

WQA NSF/ANSI Std 61 • Certified by WQA to NSF/ANSI Std 61 for material safety.

Ease of use with twist-to-lockThe 3M™ High Flow filter system is designed with ease-of-use in mind. From a user-friendly, ergonomically designed handle that makes cartridge installation and removal easier without the use of special tools or other hardware, to a “twist-to-lock” cartridge seating mechanism that provides a positive seal, the 3M High Flow filter system facilitates easy operation and maintenance of your filter system.

3M™ High Flow HFM series filters for organic and/or biological contaminantsThe High Flow HFM series filters utilize a 3M microfiber media specifically designed for use in process fluid applications containing organic and/or biological contaminants. The media design helps prevent premature blinding of the filter outer surface, promoting fuller utilization of the media, resulting in an optimum combination of particle removal efficiency and contaminant holding capability.

4


www.3M.com/highflow

Ease of use An ergonomically designed handle facilitates fast and easy insertion and removal without the use of special tools. Cartridges are simply inserted over a built-in guide tube.

Figure 4: 3M™ High Flow filter cartridge design features

Compound radial pleat design Maximizes usable surface area per cartridge

High flow3-inch core permits up to 500 gpm through a single cartridge (60” length). Seating mechanism uses a “twist to lock” design to provide a positive seal.

Polypropylene constructionProvides wide range of compatibility with various fluids.

5


www.3M.com/highflow

350 GPM system (1325 LPM)


1 Cartridgein a

8.6” diameterhousing

7 Cartridgesin a

24” diameterhousing

18 Cartridgesin a

14” diameter housing

85 Cartridgesin a


2.5” pleatedcartridges

2.5” pleatedcartridges

24 Cartridgesin a


120 Cartridgesin a


2.5” depthcartridges

2.5” depthcartridges

3M High Flow series �lter

system

TM

3M High Flow series �lter

system

TM

3M™ High Flow system vs. conventional 2.5” filter systems comparison basis:• 40” length cartridges• Fluid viscosity: 1 cps

Figure 5 – Comparison of required filter cartridges & housing footprint

• 3M High Flow series filter housings are 33% to 50% smaller than filter housings for conventional 2.5” OD cartridges for a given flow rate

• Flow rates per cartridge:• 3M™ High Flow cartridge: 350 gpm• 2.5” outer diameter (OD) conventional pleated cartridge: 20 gpm• 2.5” outer diameter (OD) conventional depth cartridge: 15 gpm

The Bottom line:• The 3M High Flow system

requires 90% fewer cartridges as conventional 2.5” OD cartridge systems for a given flow rate

• Fewer filters and a user-friendly housing design mean easier and faster filter change-outs



6


www.3M.com/highflow

Construction

Absolute Rating (microns) HF Series: 1, 2, 5, 10, 15, 25, 40, 70 HFM Series: 5, 10, 20, 70*

*5 micron nominal

Filter Media, Center Core, End Caps, Outer Sleeve Polypropylene

Sealing O-ring options Nitrile, ethylene propylene rubber (EPR), silicone, fluorocarbon

O-Ring Size/End Cap Connection 338 (Special Thread Design)3.0” (76.2 mm)

Cartridge Dimensions

Inside Diameter (nominal) 3.0" (76.2 mm)

Outside Diameter (nominal) 6.5" (165 mm)

Length (nominal) 10” (254 mm ) 40" (1016 mm)60” (1524 mm)

Operating Conditions

Maximum Recommended Flow Rate in Water (@70° F)85 gpm (19.3 m3/hr ) – 10” Length

350 gpm (79.5 m3/hr) – 40” Length500 gpm (113.6 m3/hr) – 60” Length

Maximum Continuous Operating Temperature 160 °F (71 °C)

Maximum Hot Water Sanitization Temperature 194 °F (90 °C)

Maximum Forward Differential Pressure 50 psid @ 68°F (3.4 bar @ 20 °C)

Recommended Change-out Differential Pressure 35 psid @ 68°F ( 2.4 bar @ 20 °C)

Clean Pressure Drop See Page 8 and 9

Regulatory

FDA CFR-21 Listed Materials of Construction

Certified by WQA to NSF/ANSI Std 61

3M™ High Flow Series Filter Specifications

7


www.3M.com/highflow

3M™ High Flow system filter housings3M™ High Flow system filter housings are specifically designed to deliver all of the system’s benefits in a compact footprint in your production site. Housings are available in ASME code or Non- Code standard designs, as well as customizable configurations to suit your specific needs. The surface finishes available for the housings are glass bead blasted, painted or polished.

3M High Flow series filter housings are available in a variety of standard sizes to accommodate from 1 to 19 3M High Flow filter cartridges in 10-inch, 40-inch and 60-inch lengths. Other High Flow housing sizes and configurations are also available upon request.

The outside-to-inside flow pattern of the 3M High Flow system translates into a simpler filter housing design and operation. Alternative inside-to-outside flow designs require the use of a bulky support plate for cartridge sealing. This support plate must be removed during cartridge installation and change-out, and may require the use of special tools. The 3M High Flow housing features a centerpost design for cartridge support, requiring no support plates or special tools, providing a user-friendly cartridge installation and removal process.

3M High Flow series filter housings come with a choice

Figure 7: 3M™ High Flow Housings

Figure 6: 3M™ High Flow Sanitary Design Housings

of standard inlet and outlet connection size options. The “MAX” option uses inlet and outlet connections sized for the maximum design flow through the High Flow cartridges (350 gpm for 40-inch, 500 gpm for 60-inch). For applications where operation at less than 50% of the maximum design flow is preferred (e.g. those having a higher inlet solids level, or where optimizing filter life is a priority), the “STD” option, which uses smaller inlet & outlet connections, may be chosen.

8


www.3M.com/highflow

9


www.3M.com/highflow

10


www.3M.com/highflow

At eveni sum litati cum fuga. Ventibus. rerit aturem restiaspiet volendi

10-inch housing: ASME code and Non-Code housing designs are available to accommodate the 10-inch High Flow cartridge. This allows the user to take advantage of the benefits of the High Flow cartridge design (high efficiency filter media, “twist to lock” positive seating mechanism). These versions, capable of maximum flow rates of 85 gpm per cartridge, are great choices for lower process flow applications (such as point-of-use).

3M™ High Flow System Filter Housings

Features Benefits

High Flow Capability per Cartridge (vs. conventional 2.5” diameter cartridges)

Allows for use of smaller diameter housing reducing capital expense and system footprint requirements.Fewer cartridges required, resulting in:• Reduced cartridge handling & disposal• Reduced filter change-out time• Less individual cartridge seal points reducing chance of fluid

bypass

Robust Cartridge Centerpost Support Design • Eliminates need for bulky support plates and tools.• Facilitates cartridge installation & removal.

Unique Diamond Pleated Cartridge Sealing Mechanism (“Twist‐to‐Lock” into Plug Base Closure)

• Allows for verification of proper cartridge seating, reducing chance of fluid bypass

Oil & gas service: Specially designed 3M High Flow series housings are available upon request in designs to accommodate requirements typically found in oil & gas applications, including:

• Corrosion allowances• Higher pressure ratings• Swing bolt closure design• Non-destructive examination• NACE (National Association

of Corrosion Engineers) Compliance

• Post weld heat treatment

Food & beverage service: Specially designed 3M High Flow Sanitary Design Housings are designed to deliver all of the system's benefits in a compact footprint:

• 316L Stainless steel construction generally regarded as safe

• Internal/external polished surfaces

• Sanitary flange connections (for inlet, outlet, bleed & drain ports)

Industry-specific high flow housing designs

11


www.3M.com/highflow

Housing Family 10” ASME Code 10” Non-Code 40” ASME

Code60” ASME

Code 10” Sanitary 40” Sanitary Design 60” Sanitary

Standard Designs(# of Cartridges) 1 1 1, 3, 5, 7, 12, 19 1 1 1

Design Specification ASME Code Non-Code ASME Code Non-Code

Design Pressure 150 psi @ 250 F 150 psi @ 195 F 150 psi @ 250 F

Material of Construction 304 SS 316L SS

Carbon Steel *304 SS *316L SS

316L SS

O-Ring/Gasket Buna N EPDM

Orientation Vertical Vertical Horizontal** Horizontal Vertical Horizontal Horizontal

Cover Swing Bolt – Hinged Clamp Swing Bolt – Hinged or

Davit Arm Clamp Swing Bolt – Hinged

Swing Bolt – Hinged

Exterior Finish Bead Blast PolishedCarbon Steel – Enamel

Stainless Steel – Bead Blast Polished

* Not available in 1-Around.** 1-Around 40" available with Verticle stand, some multi-around verticals are available - consult factory.

Housing Model

# of Cartridges

Housing OD (in/cm)

Materials of Construction

STD MODEL MAX MODELHousing

Dimensions (Inches/

Centimeters See figure 8)

Inlet & Outlet Connection

Sizes (in./cm)

(ANSI Flanges)

Maximum Flow

(gpm/lpm)


Sizes (in./cm)

(ANSI Flanges)

Maximum Flow

(gpm/lpm)

1HF40 1 8.625/22316L

Stainless Steel

– – 4 350/1325(A) 641/2/163.8

(B) 16/40.6(C) 407/8/103.8

3HF40 3 16/41

Carbon steel

304 Stainless Steel

316L Stainless

Steel

4 438/1658 6 875/3312(A) 741/4/188.5(B) 241/2/62.2(C) 513/4/131.4

5HF40 5 20/51 6 775/2934 8 1550/5867(A) 823/4/208(B) 281/2/72.4(C) 551/8/140

7HF40 7 24/61 8 1225/4637 10 2450/9274(A) 877/8/223.2

(B) 32/81.3(C) 647/8/164.8

12HF40 12 30/76 10 2100/7949 14 4200/15898(A) 967/8/246

(B) 36/91.4(C) 72/182.8

19HF40 19 36/91 12 3325/12586 18 6650/25173(A) 1055/8/268.3

(B) 36/91.4(C) 761/8/193.3

3M™ High Flow Series Filter Housing specifications

3M™ High Flow Series Industrial Filter Housing specifications (for 40" L High Flow cartridges)

12


www.3M.com/highflow

Housing Part Number

Housing OD

Material of Construction Inlet / Outlet Maximum

FlowHeight Footprint Drain Vent Gauge

1HF10VBGD 8 5/8” 304 SS 2” RFSO Flange 85 GPM 41”* 13” In-Line Face-to-Face ½” npt ¼” npt ½” npt

1HFN10VCGD 8” 316L SS 2” npt 85 GPM 23” 12” Face-to-Face ¾” npt ¼” npt None

1HFX40VC 8 5/8” 316L SS 4” RFSO Flange 350 GPM 80”* Stand 23" diameter 1” npt ¼” npt ¼” npt

Housing Part Number

Housing OD

Material of Construction Inlet / Outlet Maximum

FlowHeight Footprint Drain Vent Gauge

1HF10VCS 8” 316L SS 2” Sanitary 85 GPM 35” 8" Diameter ½” Sanitary ½” Sanitary 1 ½” Sanitary

1HFX40HCS 10 3/4" 316L SS 3” Sanitary 250 GPM 50” 55” L X 18” W 1” Sanitary ½” Sanitary 1 ½” Sanitary

1HFX60HCS 10 3/4" 316L SS 3” Sanitary 250 GPM 50” 75” L X 18” W 1” Sanitary ½” Sanitary 1 ½” Sanitary

Housing Model

# of Cartridges

Housing OD (in/cm)

Materials of Construction

STD Model MAX Model

Housing Dimensions (See

figure 8)


Sizes (in./cm)(ANSI

Flanges)

Maximum Flow

(gpm/lpm)


Sizes (in./cm)(ANSI

Flanges)

Maximum Flow

(gpm/lpm)

1HF60 1 8.625/22 316L Stainless Steel – – 4 500/1893(A) 841/2/214.6

(B) 16/40.6(C) 417/8/106.3

3HF60 3 16/41

Carbon Steel

304 Stainless Steel

316L Stainless steel

4 750/2839 8 1500/5678(A) 981/4/249.5(B) 241/2/62.2(C) 517/8/141.9

5HF60 5 20/51 6 1225/4637 10 2450/9274(A) 1043/4/266(B) 281/2/72.4(C) 555/8/141.3

7HF60 7 24/61 8 1750/6624 12 3500/13249(A) 1095/8/278.4

(B) 32/81.3(C) 647/8/164.7

12HF60 12 30/76 10 3000/11356 16 6000/22712(A) 1187/8/ 301.9

(B) 36/91.4 (C) 721/2/184.1

19HF60 19 36/91 12 4750/17981 20 9500/35961(A) 1275/8/324.1

(B) 36/91.4 (C) 765/8/194.6

3M™ High Flow Series Industrial Filter Housing specifications (for 60" L High Flow cartridges)

3M™ High Flow Series Industrial Filter Housing specifications

3M™ High Flow Series Sanitary Design Filter Housing specifications

*Adjustable

13


www.3M.com/highflow

Figure 8: 3M™ High Flow 40” L & 60” L Housings – Horizontal configurations

Figure 9: 3M™ High Flow 40” L & 60” L Sanitary Design Housings – Horizontal

configurations

A

38 in.

22 1/2 in.

61/8 in.27/8 in.

Figure 10: 3M™ High Flow 10” L Housings – ASME Code and Non-Code Versions*. *Total clean system pressure drop is the sum of the housing pressure drop and the selected element pressure drop for a given flow rate (assumes fluid viscosity of 1 cps).

6.0

5.0

4.0

3.0

2.0

1.0

00 20 40 60 80 100

HF Housin

g

HFN Housing

Flow Rate (GPM)10" HFN Housing Non-Code

10" HF Housing ASME Code 10" HF Sanitary Design Housing

29 3/8[746.0 mm]

REF

10 27/32[275.2 mm]

REF

35 3/4[908.4 mm]

MINIMUM DISTANCEREQUIRED TO REMOVE

COVER WELDMENT

14


www.3M.com/highflow

Figure 11: 3M™ High Flow housing (40”L & 60”L) clean pressure drop vs. flow rates**Assumes fluid viscosity of 1 cps. Pressure drop for MAX housing models without filters installed.

15


www.3M.com/highflow

Part Number Description

1HFN10VCGD 1-Around 10” High Flow, Non-Code, Vertical, 316LSS, Nitrile Gasket, 2" npt Inlet/Outlet

1HF10VBGD 1-Around 10” High Flow, ASME Code, Vertical, 304 SS, Nitrile Gasket, 2" Flange Inlet/Outlet

1HF10VCS 1-Around 10” High Flow, Non-Code, Vertical, 316L SS, EPDM Gasket, 2" Sanitary Inlet/Outlet

1HFX40HCS 1-Around 40” High Flow, Non-Code, Horizontal, 316L SS, EPDM Gasket, 3" Sanitary Inlet/Outlet

1HFX60HCS 1-Around 60” High Flow, Non-Code, Horizontal, 316L SS, EPDM Gasket, 3" Sanitary Inlet/Outlet

3M™ High Flow Housings - Ordering Guide (for all 10"and Sanitary Design 40" and 60" Length Housings)

Model CartridgeLength

Micron Rating(@ 99.9% PRE)

Micron Rating O-RingMaterial

HFM - High Flow(High Loft Media)

10 - 10 inch40 - 40 inch60 - 60 inch

PP - Polypropylene

A05 - 5 um (Absolute)A10 - 10 um (Absolute)

A20 - 20 um (Absolute)*N05 - 5μm (Nominal)

D - Nitrile

Model CartridgeLength

Micron Rating(@ 99.9% PRE)

Micron Rating O-RingMaterial Packaging

HF - High Flow10 - 10 inch

40 - 40 inch60 - 60 inch

PP - Polypropylene

001 - 1μm002 - 2μm005 - 5μm010 - 10μm015 - 15μm025 - 25μm040 - 40μm070 - 70μm

A - SiliconeB - Fluorocrabon

C - EPRD - Nitrile

01 - 1 Pack

3M™ High Flow Cartridges - Ordering Guide

Number of Filter Elements Model Flow Rate

Capability Cartridge Size Configuration HousingMaterial(1)

13571219

HF X = MAXS = STD (2)

4060

H = Horizontal V = Vertical(3)

A = Carbon Steel(2)

B = 304 SS(2)

C = 316 SS

3M™ High Flow Industrial ASME Code Housings - Ordering Guide (For 40" & 60" Length Cartridges)

Notes:1) All housing models come standard with nitrile cover gasket. Contact factory for other gasket materials.2) Not available for single element (1-round) configuration. 3) 1HFX40V is standard configuration, other vertical configurations available upon request.

*(70μm Absolute)

3M Purification Inc. Separation and Purificaton Sciences Divison 400 Research ParkwayMeriden, CT 06450 USA

Phone 1-800-243-6894 1-203-237-5541Web 3Mpurification.com

Water Quality Association Tested and Validated Under IndustryStandards is a trademark of Water Quality Association.3M is a trademark of 3M Company.© 2018 3M Company. All rights reserved. 70020187103 REV 0818

For more information about the 3M High Flow series system please contact your local Industrial territory sales manager, call 1-800-243-6894, option 4 or visit our website at 3M.com/highflow.

3MTM High Flow series filter cartridges are tested and certified by WQA against NSF/ANSI Standard 61 for material safety requirements only.

Product Selection and Use: Many factors beyond 3M’s control and uniquely within user’s knowledge and control can affect the use and performance of a 3M product in a particular application. As a result, customer is solely responsible for evaluating the product and determining whether it is appropriate and suitable for customer’s application, including conducting a workplace hazard assessment and reviewing all applicable regulations and standards (e.g., OSHA, ANSI, etc.). Failure to properly evaluate, select, and use a 3M product and appropriate safety products, or to meet all applicable safety regulations, may result in injury, sickness, death, and/or harm to property.

Warranty, Limited Remedy, and Disclaimer: Unless a different warranty is specifically stated on the applicable 3M product packaging or product literature (in which case such warranty governs), 3M warrants that each 3M product meets the applicable 3M product specification at the time 3M ships the product. 3M MAKES NO OTHER WARRANTIES OR CONDITIONS, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OR CONDITION OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR ARISING OUT OF A COURSE OF DEALING, CUSTOM, OR USAGE OF TRADE. If a 3M product does not conform to this warranty, then the sole and exclusive remedy is, at 3M’s option, replacement of the 3M product or refund of the purchase price.

Limitation of Liability: Except for the limited remedy stated above, and except to the extent prohibited by law, 3M will not be liable for any loss or damage arising from or related to the 3M product, whether direct, indirect, special, incidental, or consequential (including, but not limited to, lost profits or business opportunity), regardless of the legal or equitable theory asserted, including, but not limited to, warranty, contract, negligence, or strict liability.

separation and purification sciences division compound ...separation and purification sciences...

Documents