separator & filter product line water - oil - gas
TRANSCRIPT
SEPARATOR & FILTER PRODUCT LINE
WATER - OIL - GAS
Pipeline Oil & Gas Equipment, Inc. Web Page: www.pipe-equip.com - E-Mail: [email protected]
Tel: 281-2144919
LINE SEPARATOR
• APPLICATION: RELATIVELY CONSTANT GASAND LIQUID FLOWS; NO SLUGGING, LOWLIQUID/GAS RATIOS.• PRESSURE DROP: 0.1-1.0 PSI AT MAXIMUMRATED CAPACITY. • EFFICIENCY: 100% REMOVAL OF ALLDROPLETS GREATER THAN 10 MICRONS.• OTHER: AGGLOMERATORS AVAILABLE TOCOALESCE SMALL DROPLETS IN INLETNOZZLE.• VANE TYPES: STANDARD OR DOUBLEPOCKET.
VERTICAL SEPARATORS
• APPLICATION: HIGH LIQUID/GAS RATIOS COINCIDENT WITH HIGH GAS RATES; LIQUID SLUGS. • PRESSURE DROP: 1.0-1.5 PSI AT MAXIMUM RATED CAPACITY. • EFFICIENCY: 100% REMOVAL OF ALL DROPLETS GREATER THAN 10 MICRONS IN DIAMETER OR OUTLET ENTRAINMENT WILL BE LESS THAN 0.1 GALLON PER MMSCF. • OTHER: AVAILABLE WITH VARIOUS INLET DEVICES FOR DIFFERENT LIQUID/GAS RATIOS. • VANE TYPES: STANDARD OR DOUBLE POCKET.
HORIZONTAL SEPARATORS
• APPLICATION: HIGH LIQUID/GAS RATIOS COINCIDENT WITH HIGH GAS RATES; LIQUID SLUGS; MULTI-PHASE. • PRESSURE DROP: 0.75-1.0 PSI AT MAXIMUM RATED CAPACITY. • EFFICIENCY: 100% REMOVAL OF ALL DROPLETS GREATER THAN 10 MICRONS IN DIAMETER OR OUTLET ENTRAINMENT WILL BE LESS THAN 0.1 GALLON PER MMSCF. • OTHER: AVAILABLE WITH VARIOUS INLET DEVICES, BAFFLES, WEIRS, ETC • VANE TYPES: STANDARD OR DOUBLE POCKET.
THREE-PHASE SEPARATOR
• APPLICATION: LIQUID, GAS AND HYDROCARBON SEPARATION. HIGH LIQUID/GAS RATIOS COINCIDENT WITH HIGH GAS RATES; LIQUID SLUGS; MULTI-PHASE. • PRESSURE DROP: 0.75-1.0 PSI AT MAXIMUM RATED CAPACITY. • EFFICIENCY: 100% REMOVAL OF ALL DROPLETS GREATER THAN 10 MICRONS IN DIAMETER OR OUTLET ENTRAINMENT WILL BE LESS THAN 0.1 GALLON PER MMSCF. • OTHER: AVAILABLE WITH VARIOUS INLET DEVICES, BAFFLES, WEIRS, ETC. • VANE TYPES: STANDARD.
DRY SCRUBBERS
• APPLICATION: LIQUID AND SOLIDS PRESENT IN A GAS STREAM CAN ACCOMMODATE LIQUID SLUGGING WITH SOME DESIGN MODIFICATIONS. • PRESSURE DROP: 0.1-10.0 PSI (DEPENDING ON OPERATING PRESSURE) AT MAXIMUM RATED CAPACITY. • EFFICIENCY: SOLIDS: 100% OF ALL SOLID PARTICLES GREATER THAN 10 MICRONS IN DIAMETER. LIQUIDS: LIQUID ENTRAINMENT LESS THAN 0.1 GALLONS PER MMSCF. • OTHER: LIMITED TO 4:1 TURNDOWN RATIO; BLOCKING TUBES AVAILABLE. • VANE TYPES: 2.0 INCH & 4.5 INCH (DEPENDING ON VESSEL SIZE AND APPLICATION).
GAS FILTERS
• APPLICATION: REMOVAL OF SOLID PARTICLES FROM A GAS STREAM; NOT FOR HIGH SOLIDS CONCENTRATIONS. • PRESSURE DROP: 0.25 TO 2.0 PSI AT MAXIMUM RATED CAPACITY, WHEN CLEAN. • EFFICIENCY: SOLIDS: 100% REMOVAL OF ALL PARTICLES GREATER THAN 3 MICRONS AND 99.5% FROM 3 MICRONS TO 1.5 MICRONS. • OTHER: AVAILABLE WITH VARIOUS NOZZLE CONFIGURATIONS & ORIENTATIONS. • VANE TYPES: 3.5 AND 4.5 INCH DIAMETER WITH VARIOUS GASKETS.
HORIZONTAL FILTER SEPARATOR
• APPLICATION: LIQUID AND/OR SOLID IN A GAS STREAM, SOLID LOADING RELATIVELY LIGHT. • PRESSURE DROP: 1.0-1.5 PSI AT MAXIMUM RATED CAPACITY. • EFFICIENCY: SOLIDS: 100% REMOVAL OF ALL PARTICLES GREATER THAN 3 MICRONS IN DIAMETER. 99% REMOVAL OF ALL PARTICLES 0.5 TO 3 MICRONS IN DIAMETER.
LIQUIDS: 100% REMOVAL OF ALL LIQUID DROPLETS GREATER THAN 10 MICRONS IN DIAMETER. 99.5% REMOVAL OF ALL DROPLETS 0.5 TO 10 MICRONS IN DIAMETER. • OTHER: HORIZONTAL OR VERTICAL CONFIGURATIONS.
FILTER SEPARATOR EXAMPLE
• DIAMETER:54” OD
• RATING:ANSI 900#
• ASME U STAMP
• ELEMENTS:JONELL JFG-336-CE
FILTER SEPARATOR EXAMPLE
• DIAMETER:54” OD
• RATING:ANSI 900#
• ASME U STAMP
• ELEMENTS:JONELL JFG-336-CE
ABSOLUTE SEPARATOR
• APPLICATION: REMOVAL OF TRACE AMOUNTS OFLIQUID FROM A GAS STREAM LIMITED TO LIGHTLIQUID LOADING; TRACE SOLIDS ALSO CAN BEHANDLED.• PRESSURE: 0.5-1.0 PSI AT MAXIMUM RATEDCAPACITY. • EFFICIENCY: 100% REMOVAL OF ALL DROPLETSGREATER THAN 3 MICRONS AND 99.989% REMOVALOF ALL DROPLETS LESS THAN 3 MICRONS INDIAMETER.• INLET SECTION: VANE OR CYCLONE PRIMARYSEPARATORS AVAILABLE.• FILTER SECTION: SPECIAL 5.5 INCHES O.D. HIGHDENSITY FILTERS CARTRIDGE.
PRODUCT APPLICATION