serbloc quality is our main vocation - simaf
TRANSCRIPT
IMP
. D
ALI
GA
ULT
- V
IRO
FLA
Y -
01
3024
0206
Quality is our main vocation
6, rue Nationale 92100 BOULOGNE-BILLANCOURTPhone : 33 (0) 1 46 21 05 32 Fax : 33 (0) 1 46 21 00 76
By adapting our production to new technologies,we have managed to gain the confidence
of both small entreprisesand major international corporations,
in leading economic sectors like the automobileindustry, household appliances, telephone,
office automation, computer technology, etc.
SIMAF PRODUCTION has a golden ruleof permanent control,from manufacture to distributionwhich has guaranteed a constant qualityof our production.
Our production tools are perfectlywell adapted to the manufacture of simple or
complex machine parts in different types ofmaterial such as : steel, stainless steel,
brass, plastics, and this for small,medium and high volume.
antirotation
blind rivet nut
When setting, the flutes anchor the SERBLOCnut in the support, giving it considerable clamping strength.
Torque resistance is higher than that of a class 6.8 steel screw.
Support preparation.The cylindrical housing P can be made by punching or drilling. For countersunk heads, provide a countersink F that allowsthe SERBLOC to protrude the support surface by 0.1 mm. It is essential to respect dimension P in our tables.
It is important to choose exactly, depending on use :– the diameter of the screw to be used– the material and finish of the SERBLOC– the type of head : standard flat head « TP », large « TPL », countersunk head « TF », SERFIN « S »– its characteristics, open or closed B, for reasons of leakproofing and corrosion– the thickness to be crimped of the support S determines the SERBLOC reference mentioned on each of our tables and
corresponds to the crimping range contained between minimum and maximum thickness that the SERBLOC canconveniently crimp.
The SERBLOC nuts can be in : zinc plated, yellow chromating STEEL orwith other forms of protection on demand - BRASS - ALUMINIUM alloys -STAINLESS STEEL.
The SERBLOC nut is fluted to allow blind fastening in metal sheets, plastic, wood andother conglomerate materials like laminated Isorel or similar products.
AND EVERYWHERE WHEN :– the support is too thin for resistant threading– blind mounting is necessary because the other side of the support is unaccessible (tubes - hollow sections)– a removable mounting is required– crimping of one or several parts that are to be screw-mounted to other parts– inserting threading in painted, polished, enamelled parts is delicateFurthermore, recessed threading makes the SERBLOC nut leakproof to fluid and humidity.
ADVANTAGES
APPLICATIONS
MOUNTING
1 - Screw the SERBLOC nutinto the screw rod of the toolabutting on the machinenosepiece.
2 - Insert the SERBLOC nut inthe hole drilled in the support.
3 - Actuate the handles or thetrigger of the mounting tool.Traction is produced onthe threaded section ofthe SERBLOC nut, causingthe cylindrical drum onthe mock or blind side toexpand fixing the SERBLOCin its support.
4 - Now that the SERBLOC nutis fixed, complete securityis provided. The flutes havepenetrated the supportto be crimped, anchoringthe SERBLOC nut.Unscrew the screw rodof the mounting tool.
5 - The SERBLOC nut is readyfor screw or attachmentmounting providing a solidthreading in thin or hollowelements.
outil de pose outil de pose
MATERIAL AND FINISH
SERBLOC CHOICE
Anchoring flutes forADDITIONAL
SECURITY
rapid assembly conical barre
Flat headTP or TPL
Countersunk headTF
SerfinS
Thicknessto be crimped
SERBLOC
20
manualmountingtools for
small series
SER 250 B
A HAND CLAMP with manual screwing and unscrewingof SERBLOC.To mount SERBLOC - M3, M4, M5 steel nuts and M6aluminium nuts.Sold with M3, M4, M5 and M6 tools.
A HAND CLAMP with a rapid screwing and unscrewingdevice.SER 340 : To mount SERBLOC M4 to M6.SER 370 : To mount SERBLOC M6 to M10.Sold with their tools.
A HAND CLAMP with two levers and a rapid screwingand unscrewing device.To mount SERBLOC nuts in the M6 to M14 range.Sold with are tooling.
SER 500
SER 340 - SER 370
semi-automaticmountingtools for
large series
SER 4500
PNEUMO-OIL device with a single trigger for screwing,tightening and unscrewing.To mount SERBLOC nuts in the M8 to M16 range, in largeseries.Sold with M10 to M12 tools.
PNEUMO-OIL compact device with automatic screwingof bolts by pressing the connecting mandrel.To mount SERBLOC nuts in the M3 to M8 range, in diffi-culty accessible places.Sold with M3 to M8 tools.
PNEUMO-OIL device with a single trigger for screwing,thightenius and unscrewing. To mount SERBLOC wits fromM3 to M10 range, in large series.Sold with M3 to M10 tools.
SER 3600
SER 3400
1
TIGHTENING TORQUE (Nm)
M
3
4
5
6
8
10
12
Steel SERBLOC
2,0
5,0
12,0
30,0
51,0
70,0
100,0
Aluminium SERBLOC
0,6
2,0
4,0
8,0
15,0
16,0
38,0
Steel SERBLOC
3 950
5 390
7 740
10 584
15 680
19 110
32 500
Aluminium SERBLOC
2 600
4 215
5 390
5 880
7 750
10 260
14 360
Steel SERBLOC
1 900
2 845
4 361
6 270
7 250
7 450
9 600
Aluminium SERBLOC
2 900
1 765
2 595
2 945
4 165
4 560
7 350
EXTRACTION LOAD (N) SHEARING (N)
anchoring flutes forADDITIONAL
SECURITY
antirotation
blind rivet nut
TECHNICAL CHARACTERISTICS
Values given in this table are for information purposes only.
TIGHTENING TORQUEIt should be noted that all tests were performed using steel treated bolts with a breaking load (R) of 2100 N/mm2 and anelastic limit (E) of 1800 N/mm2.In comparison, standard bolts of soft steel have much lower resistances, r = 450 N/mm2, E = 250 N/mm2. For example, in therecommended tightening torques (C) and tensile load (T), for soft and treated steel bolts. R = 1300 N/mm2, 5 = 900 N/mm2.
Tightening torques and tensile loads on the bolt have been defined at 3/4 of the bolt elastic limit for a friction coefficientof 0.12, corresponding to carefully manufactured, mounted and lubricated bolts. For the same sort of bolt and with a givendiameter, tensile loads are proportional to lightening torque.Consequently, if one applies a 20 Nm torque to a soft steel bolt with a diameter of 10, the tensile load will be : 10.870 x 20 = 11.625 N. Inversely, the torque causing a load of 9,800 N will be : 18.7 x 9.800 = 16.8 Nm
18.7 10.870
EXTRACTION LOADS (Fe)These vary depending on the thickness of support to be crimped (S) and can be calculated by using the following formula :Fe = 0.5 x S1,5 x D x La (D = SERBLOC barrel diameter, La = apparent elastic limit).
SERBLOC SHEARING RESISTANCEFigures in the table have been obtained using dimensionally stable sections without the bolt being fixed.
Ø
4
5
6
C (Nm)
1,2
2,5
3,9
C (Nm)
4,2
8,1
14,0
T (Nm)
1 650
2 660
3 770
T (Nm)
5 900
9 600
13 600
8
10
12
C (Nm)
9,3
18,7
31,8
C (Nm)
33,6
67,2
114,0
T (Nm)
6 860
10 870
15 800
T (Nm)
24 700
39 150
56 900
ØSOFT STEEL SOFT STEELTREATED STEEL TREATED STEEL
SERBLOC
19
IS ALSO :
SELF-CLINCHINGSTUDS
INTERNALLY THREADEDSELF-CLINCHING NUTS
CAGE NUTfor thin metal sheet
SELF-CLINCHINGSTANDOFFS
BLIND RIVETSAvailable in large varietyot types and materials
6, rue Nationale 92100 BOULOGNE-BILLANCOURT - FrancePhone : 33 (0) 1 46 21 05 32 Fax : 33 (0) 1 46 21 00 76
2
a few applications
Mounting a support on reinforced polyster orother thin plastic sections, as well as laminated orpolywood surfaces.
Boat hulls, top hampers, car bodies, industrialvehicles, kitchen and office fittings, computers, etc.
Liquid and humidity tight assemblies.
Leaktight mounting of a support on fuel or oil tanks,upper works, etc.
Blind mounting of SERBLOC TF in a hollow section.
Refrigerating equipment, household appliances,car bodies, agricultural machinery, metal structures,etc.
Linking in a hollow section.
Metal office, garden and camping furniture, rollershutter mechanisms, etc.
Mounting of several supports with the option offixing other connected elements.
Protective and decorative internal aven plates, lifts,service elevators, tractor cabins, ski lifts, construc-tion equipment, refrigeration equipment, etc.
Mounting a hollow section on a wooden supportplatform.
Office furniture, rolling stock, naval construction, tophampers, etc.
SERBLOC TP
SERBLOC TPB
SERBLOC TP
SERBLOC TF
SERBLOC TF SERBLOC TP
GOUJON
SERECROU
COLONNETTE
SERBLIND
SERCAGE
18
Special nota and technical data
Interlocutor : ............................................................................................................................................................................................................
6, rue Nationale 92100 BOULOGNE-BILLANCOURT - FrancePhone : 33 (0) 1 46 21 05 32 Fax : 33 (0) 1 46 21 00 76
3
SUMMARYPage
Technical Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Examples of different uses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
SERBLOC :Flat Head (Open ended knurled in stainless steel or steel) TP Type . . . . . . . . . . . . . . . 4
Flat Head (Blind ended knurled in stainless steel or steel) TPB Type . . . . . . . . . . . . . . . 5
Large Flat Head (Flange open ended knurled in stainless steel or steel) TPL Type . . 6
Large Flat Head (Blind ended knurled in stainless steel or steel) TPLB Type . . . . . . . . . 7
Countersunk Head (Open ended knurled in stainless steel or steel) TF Type . . . . . . . 8
Countersunk Head (Blind ended knurled in stainless steel or steel) TFB Type . . . . . . . 9
SERFIN :Flush Head (Open ended knurled) S Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Flush Head (Blind ended knurled) SB Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
HEXAGONAL :Hexagonal Flat Head (Open ended steel) FH Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Hexagonal Flush Head (Open ended steel) SFH Type . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Hexagonal Flat Head (Open ended stainless steel) FHX Type . . . . . . . . . . . . . . . . . . . 14
Hexagonal Flush Head (Open ended stainless steel) SHX Type . . . . . . . . . . . . . . . . . . 15
Hexagonal Small Head (Open ended steel) FHTR Type . . . . . . . . . . . . . . . . . . . . . . . . . 16
Stud nuts Flat Head GTP Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Special notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
More about SIMAF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Tooling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Certification ISO 9002
17
Stud nuts flat head type « GTP »Material : Steel zinc yellow.
D
* Thicknesses to be crimped indicated in this table are not limited. If you require,we can manufacture any SERBLOCyou need.
M
4
5
6
8
REFERENCES
G4 TP 15 (L1)G4 TP 30 (L1)G4 TP 40 (L1)
G5 TP 15 (L1)G5 TP 30 (L1)G5 TP 45 (L1)
G6 TP 20 (L1)G6 TP 35 (L1)G6 TP 50 (L1)
G8 TP 25 (L1)G8 TP 40 (L1)G8 TP 55 (L1)
D
6
7
9
11
E
0,8
1,8
1,5
1,5
P
6,1
7,1
9,1
11,1
L
15,0016,5018,00
17,0018,5020,00
20,0021,5023,00
21,0022,5024,00
T
8
9
11
14
L1*
101215
101215
101520
101520
Thicknessto be crimped
S*
0,5 to 1,51,5 to 3,53,5 to 4,5
0,5 to 1,51,5 to 33 to 4,5
1 to 22 to 3,53,5 to 5
1 to 2,52,5 to 44 to 5,5
Thickness to be crimpedunlimited standard*
4
* Thicknesses to be crimped indicated in this table are not limited. If you require,we can manufacture any SERBLOCyou need (M14. M16. + Brass).
SERBLOC GOUJONSERBLOC
*
M
3
4
5
6
8
10
12
STEEL
3 TP 153 TP 253 TP 35
4 TP 154 TP 304 TP 40
5 TP 155 TP 305 TP 45
6 TP 206 TP 356 TP 50
8 TP 258 TP 408 TP 55
10 TP 2510 TP 4010 TP 55
12 TP 3012 TP 4512 TP 60
STAINLESSSTEEL
3 TP 15 X3 TP 25 X3 TP 35 X
4 TP 15 X4 TP 30 X4 TP 40 X
5 TP 15 X5 TP 30 X5 TP 45 X
6 TP 20 X6 TP 35 X6 TP 50 X
8 TP 25 X8 TP 40 X8 TP 55 X
10 TP 25 X10 TP 40 X10 TP 55 X
12 TP 30 X12 TP 45 X12 TP 60 X
D
5
6
7
9
11
13
16
E
0,8
0,8
1,0
1,5
1,5
1,5
2,0
+0,10P
5,1
6,1
7,1
9,1
11,1
13,1
16,1
T
7
8
9
11
14
16
20
R
4,3
6,2
6,7
8,8
8,8
11,8
15,4
L
8,69,6
10,6
10,511,312,3
11,713,214,7
14,516,517,5
16,317,819,3
19,821,322,8
24,926,427,9
Thicknessto be crimped
S
0,5 to 1,51,5 to 2,52,5 to 3,5
0,5 to 1,51,5 to 33 to 4
0,5 to 1,51,5 to 33 to 4,5
1 to 22 to 3,53,5 to 5
1 to 2,52,5 to 44 to 5,5
1 to 2,52,5 to 44 to 5,5
1,5 to 33 to 4,54,5 to 6
DESIGNATION
4
5
6
8
4 TP 30 PL
5 TP 30 PL
6 TP 30 PL
8 TP 30 PL
0,5 to 3
0,5 to 3
0,5 to 3
0,5 to 3
6
7
9
11
0,8
1,0
1,5
1,5
6,1
7,1
9,1
11,1
9
10
13
16
11,3
13,2
16,5
17,5
6,2
6,7
10,8
10,8
Large crimping nuts
Flat head - open end - type « TP »Material : Steel zinc yellow.
Stainless steel (AISI 303).Aluminium.
S
Forinformation
only
Thickness to be crimpedunlimited standard*
16
Hexagonal small head - open end - type « FHTR »Material : Steel zinc yellow.
* Thicknesses to be crimped indicated in this table are not limited. If you require,we can manufacture any SERBLOCyou need.
M
4
5
6
8
C/flats
6,35
7,25
9,65
10,65
E
0,6
0,6
0,8
0,8
Punching+ 0,1
C1 0000
6,4
7,3
9,7
10,7
Thicknessto be crimped
S
0,5 to 2
0,5 to 3
0,5 to 3
0,5 to 3
T
8
9
12
13
L
10,5
11,5
14,5
16,5
Designation
FHTR4
FHTR5
FHTR6
FHTR8
Thickness to be crimpedunlimited standard*
5
* Thicknesses to be crimped indicated in this table are not limited. If you require,we can manufacture any SERBLOCyou need (M14. M16. + Brass).
M
3
4
5
6
8
10
12
STEEL
3 TPB 153 TPB 253 TPB 35
4 TPB 154 TPB 304 TPB 40
5 TPB 155 TPB 305 TPB 45
6 TPB 206 TPB 356 TPB 50
8 TPB 258 TPB 408 TPB 55
10 TPB 2510 TPB 4010 TPB 55
12 TPB 3012 TPB 4512 TPB 60
STAINLESSSTEEL
3 TPB 15 X3 TPB 25 X3 TPB 35 X
4 TPB 15 X4 TPB 30 X4 TPB 40 X
5 TPB 15 X5 TPB 30 X5 TPB 45 X
6 TPB 20 X6 TPB 35 X6 TPB 50 X
8 TPB 25 X8 TPB 40 X8 TPB 55 X
10 TPB 25 X10 TPB 40 X10 TPB 55 X
12 TPB 30 X12 TPB 45 X12 TPB 60 X
D
5
6
7
9
11
13
16
E
0,8
0,8
1,0
1,5
1,5
1,5
2,0
+0,10P
5,1
6,1
7,1
9,1
11,1
13,1
16,1
T
7
8
9
11
14
16
20
R
7,7
10,5
12,2
14,8
14,8
18,8
24,5
L
12,613,614,6
14,814,815,8
17,218,720,2
20,522,523,5
22,323,825,3
26,827,529,8
34,935,537,9
Thicknessto be crimped
S
0,5 to 1,51,5 to 2,52,5 to 3,5
0,5 to 1,51,5 to 33 to 4,5
0,5 to 1,51,5 to 33 to 4,5
1 to 22 to 3,53,5 to 5
1 to 2,52,5 to 44 to 5,5
1 to 2,52,5 to 44 to 5,5
1,5 to 33 to 4,54,5 to 6
Thickness to be crimpedunlimited standard*
Forinformation
only
DESIGNATION
HEXAGONAUX SERBLOC
C/flats
Flat head - closed end - type « TPB »Material : Steel zinc yellow.
Stainless steel (AISI 303).
15
Hexagonal flush head - open end - type « SHX »Material : Stainless steel (AISI 303).
Thickness to be crimpedunlimited standard*
* Thicknesses to be crimped indicated in this table are not limited. If you require,we can manufacture any SERBLOCyou need.
M
4
5
6
8
C/flats
5,95
6,95
8,95
10,95
E
0,5
0,5
0,5
0,5
Punching+ 0,1
C1 0000
6,0
7,0
9,0
11,0
Thicknessto be crimped
S
0,5 to 2
0,5 to 2
1,5 to 2
1,5 to 3
T
6,8
8,8
10,8
11,8
L
9,5
12,3
13,8
14,2
Designation
SH4X
SH5X
SH6X
SH8X
6
Large flat head - open end - type « TPL »Material : Steel zinc yellow.
Stainless steel (AISI 303).
Used especially in soft materials, like polyester when a greater support surface is required.
* Thicknesses to be crimped indicated in this table are not limited. If you require,we can manufacture any SERBLOCyou need (M14. M16. + Brass).
M
3
4
5
6
8
10
12
STEEL
3 TPL 153 TPL 253 TPL 35
4 TPL 154 TPL 304 TPL 40
5 TPL 155 TPL 305 TPL 45
6 TPL 206 TPL 356 TPL 50
8 TPL 258 TPL 408 TPL 55
10 TPL 2510 TPL 4010 TPL 55
12 TPL 3012 TPL 4512 TPL 60
STAINLESSSTEEL
3 TPL 15 X3 TPL 25 X3 TPL 35 X
4 TPL 15 X4 TPL 30 X4 TPL 40 X
5 TPL 15 X5 TPL 30 X5 TPL 45 X
6 TPL 20 X6 TPL 35 X6 TPL 50 X
8 TPL 25 X8 TPL 40 X8 TPL 55 X
10 TPL 25 X10 TPL 40 X10 TPL 55 X
12 TPL 30 X12 TPL 45 X12 TPL 60 X
D
5
6
7
9
11
13
16
E
0,8
0,8
1,0
1,5
1,5
1,5
2,0
+0,10P
5,1
6,1
7,1
9,1
11,1
13,1
16,1
T
8
10
11
13
16
19
23
R
4,3
6,2
6,7
8,8
8,8
11,8
15,4
L
8,69,6
10,6
10,511,312,3
11,713,214,7
14,516,517,5
16,317,819,3
19,821,322,8
24,926,427,9
Thicknessto be crimped
S
0,5 to 1,51,5 to 2,52,5 to 3,5
0,5 to 1,51,5 to 33 to 4
0,5 to 1,51,5 to 33 to 4,5
1 to 22 to 3,53,5 to 5
1 to 2,52,5 to 44 to 5,5
1 to 2,52,5 to 44 to 5,5
1,5 to 33 to 4,54,5 to 6
Thickness to be crimpedunlimited standard*
Forinformation
only
DESIGNATION
SERBLOC HEXAGONAUX
C/flats
14
Hexagonal flat head - open end - type « FHX ».Material : Stainless steel (AISI 303).
* Thicknesses to be crimped indicated in this table are not limited. If you require,we can manufacture any SERBLOCyou need.
M
4
5
6
8
10
C/flats
5,95
6,95
8,95
10,95
12,95
E
0,8
1,6
1,5
1,5
1,5
Punching+ 0,1
C1 0000
6,0
7,0
9,0
11,0
13,0
Thicknessto be crimped
S
0,5 to 2
0,5 to 2
1,5 to 2
1,5 to 3
1,5 to 3
T
8
9
11
14
16
L
10,3
13,3
15,3
15,7
20,3
Designation
FH4X
FH5X
FH6X
FH8X
FH10X
Thickness to be crimpedunlimited standard*
7
Large flat head - closed end - type « TPLB »Material : Steel zinc yellow.
Stainless steel (AISI 303).
Used especially in soft materials, like polyester when a greater support surface is required.
* Thicknesses to be crimped indicated in this table are not limited. If you require,we can manufacture any SERBLOCyou need (M14. M16. + Brass).
M
3
4
5
6
8
10
12
STEEL
3 TPLB 153 TPLB 253 TPLB 35
4 TPLB 154 TPLB 304 TPLB 40
5 TPLB 155 TPLB 305 TPLB 45
6 TPLB 206 TPLB 356 TPLB 50
8 TPLB 258 TPLB 408 TPLB 55
10 TPLB 2510 TPLB 4010 TPLB 55
12 TPLB 3012 TPLB 4512 TPLB 60
STAINLESSSTEEL
3 TPLB 15 X3 TPLB 25 X3 TPLB 35 X
4 TPLB 15 X4 TPLB 30 X4 TPLB 40 X
5 TPLB 15 X5 TPLB 30 X5 TPLB 45 X
6 TPLB 20 X6 TPLB 35 X6 TPLB 50 X
8 TPLB 25 X8 TPLB 40 X8 TPLB 55 X
10 TPLB 25 X10 TPLB 40 X10 TPLB 55 X
12 TPLB 30 X12 TPLB 45 X12 TPLB 60 X
D
5
6
7
9
11
13
16
E
0,8
0,8
1,0
1,5
1,5
1,5
2,0
+0,10P
5,1
6,1
7,1
9,1
11,1
13,1
16,1
T
8
10
11
13
16
19
23
R
7,7
10,5
12,2
14,8
14,8
18,8
24,5
L
12,613,614,6
14,814,815,8
17,218,720,2
20,522,523,5
22,323,825,3
26,827,529,8
34,935,537,9
Thicknessto be crimped
S
0,5 to 1,51,5 to 2,52,5 to 3,5
0,5 to 1,51,5 to 33 to 4,5
0,5 to 1,51,5 to 33 to 4,5
1 to 22 to 3,53,5 to 5
1 to 2,52,5 to 44 to 5,5
1 to 2,52,5 to 44 to 5,5
1,5 to 33 to 4,54,5 to 6
Thickness to be crimpedunlimited standard*
Forinformation
only
DESIGNATION
HEXAGONAUX SERBLOC
C/flats
13
Hexagonal flush head - open end - type « SFH »Material : Steel zinc yellow.
Thickness to be crimpedunlimited standard*
* Thicknesses to be crimped indicated in this table are not limited. If you require,we can manufacture any SERBLOCyou need.
M
4
5
6
8
10
C/flats
5,97
6,97
8,97
10,97
12,97
E
0,5
0,6
0,6
0,6
0,9
Punching+ 0,1
C1 0000
6
7
9
11
13
DrillP
6,85
7,85
9,95
12,15
14,25
Thicknessto be crimped
S
0,5 to 2,51,5 to 4,5
0,5 to 2,52,5 to 4,5
0,5 to 3,52,5 to 5,5
0,5 to 3,53,5 to 6,5
0,5 to 3,53,5 to 6,5
T
6,7
8,7
10,7
12,7
14,5
L
10,512,5
12,514,5
15,517,5
16,518,5
20,522,5
Designation
SFH4SFHL4
SFH5SFHL5
SFH6SFHL6
SFH8SFHL8
SFH10SFHL10
8
Countersunk head - open end - type « TF »Material : Steel zinc yellow.
Stainless steel (AISI 303).Aluminium.
F
* Thicknesses to be crimped indicated in this table are not limited. If you require,we can manufacture any SERBLOCyou need (M14. M16. + Brass).
M
3
4
5
6
8
10
12
D
5
6
7
9
11
13
16
STEEL
3 TF 203 TF 30
4 TF 204 TF 304 TF 40
5 TF 205 TF 305 TF 40
6 TF 206 TF 356 TF 50
8 TF 308 TF 458 TF 60
10 TF 3510 TF 5010 TF 65
12 TF 4012 TF 5512 TF 70
STAINLESSSTEEL
3 TF 20 X3 TF 30 X
4 TF 20 X4 TF 30 X4 TF 40 X
5 TF 20 X5 TF 30 X5 TF 40 X
6 TF 20 X6 TF 35 X6 TF 50 X
8 TF 30 X8 TF 45 X8 TF 60 X
10 TF 35 X10 TF 50 X10 TF 65 X
12 TF 40 X12 TF 55 X12 TF 70 X
E
1,5
1,5
1,5
1,5
1,5
1,5
2,5
+0,10P
5,1
6,1
7,1
9,1
11,1
13,1
16,1
T
6,8
7,8
8,8
10,8
13,8
15,8
19,8
F
0,9
0,9
0,9
0,9
1,4
1,4
1,9
R
4,8
5,5
6,7
8,6
9,8
13,8
14,3
L
8,39,3
9,510,511,5
10,511,512,5
13,514,516,5
15,316,818,3
19,320,822,3
23,925,426,9
Thicknessto be crimped
S
1 to 22 to 3
1 to 22 to 33 to 4
1 to 22 to 33 to 4
1 to 22 to 3,53,5 to 5
1,5 to 33 to 4,54,5 to 6
2 to 3,53,5 to 55 to 6,5
2 to 44 to 5,55,5 to 7
Thickness to be crimpedunlimited standard*
Forinformation
only
DESIGNATION
SERBLOC HEXAGONAUX
C/flats
12
Hexagonal flat head - open end - type « FH »Material : Steel zinc yellow.
* Thicknesses to be crimped indicated in this table are not limited. If you require,we can manufacture any SERBLOCyou need.
M
4
5
6
8
10
C/flats
5,97
6,97
8,97
10,97
12,97
E
0,8
1,8
1,2
1,3
1,5
Punching+ 0,1
C1 0000
6
7
9
11
13
DrillP
6,85
7,85
9,95
12,15
14,25
Thicknessto be crimped
S
0,5 to 2,51,5 to 4,5
0,5 to 2,52,5 to 4,5
0,5 to 3,52,5 to 5,5
0,5 to 3,53,5 to 6,5
0,5 to 3,53,5 to 6,5
T
9
10
12
14
16
L
10,512,5
12,514,5
16,518,5
17,519,5
21,523,5
Designation
FH4FHL4
FH5FHL5
FH6FHL6
FH8FHL8
FH10FHL10
Thickness to be crimpedunlimited standard*
C/flats
9
Countersunk head - closed end - type « TFB »Material : Steel zinc yellow.
Stainless steel (AISI 303).
S
F
* Thicknesses to be crimped indicated in this table are not limited. If you require,we can manufacture any SERBLOCyou need (M14. M16. + Brass).
M
3
4
5
6
8
10
12
STEEL
3 TFB 203 TFB 30
4 TFB 204 TFB 304 TPB 40
5 TFB 205 TFB 305 TFB 40
6 TFB 206 TFB 356 TFB 50
8 TFB 308 TFB 458 TFB 60
10 TFB 3510 TFB 5010 TFB 65
12 TFB 4012 TFB 5512 TFB 70
STAINLESSSTEEL
3 TFB 20 X3 TFB 30 X
4 TFB 20 X4 TFB 30 X4 TPB 40 X
5 TFB 20 X5 TFB 30 X5 TFB 40 X
6 TFB 20 X6 TFB 35 X6 TFB 50 X
8 TFB 30 X8 TFB 45 X8 TFB 60 X
10 TFB 35 X10 TFB 50 X10 TFB 65 X
12 TFB 40 X12 TFB 55 X12 TFB 70 X
E
1,5
1,5
1,5
1,5
1,5
1,5
2,5
+0,10P
5,1
6,1
7,1
9,1
11,1
13,1
16,1
T
6,8
7,8
8,8
10,8
13,8
15,8
19,8
F
0,9
0,9
0,9
0,9
1,4
1,4
1,9
R
8,2
9,5
11,5
16,6
15,8
19,8
23,3
L
11,712,7
13,514,515,5
16,717,718,7
21,523,524,5
21,322,824,3
25,326,828,3
32,934,435,9
Thicknessto be crimped
S
1 to 2
2 to 3
1 to 22 to 33 to 4
1 to 22 to 33 to 4
1 to 22 to 3,53,5 to 5
1,5 to 33 to 4,54,5 to 6
2 to 3,53,5 to 55 to 6,5
2 to 44 to 5,55,5 to 7
Thickness to be crimpedunlimited standard*
D
5
6
7
9
11
13
16
Forinformation
only
DESIGNATION
HEXAGONAUX SERBLOC
11
Flush head - closed end -type « SB »Material : Steel zinc yellow.
Stainless steel (AISI 303).
* Thicknesses to be crimped indicated in this table are not limited. If you require,we can manufacture any SERBLOCyou need.
M
3
4
5
6
8
10
12
STEEL
SB 3 ASB 3 A
SB 4 A
SB 4 A
SB 5 A
SB 5 A
SB 6 A
SB 6 A
SB 8 ASB 8 ASB 8 B
SB 10 A
SB 10 A
SB 12 A
SB 12 A
STAINLESSSTEEL
SB 3 A XSB 3 A X
SB 4 A X
SB 4 A X
SB 5 A X
SB 5 A X
SB 6 A X
SB 6 A X
SB 8 A XSB 8 A XSB 8 B X
SB 10 A X
SB 10 A X
SB 12 A X
SB 12 A X
D
4,75,7
6,3
6,3
7,1
7,3
9,4
9,3
12,610,511,3
14,1
13,3
16,1
16,3
E
0,40,4
0,4
0,4
0,5
0,5
0,6
0,5
0,60,60,5
0,7
0,7
0,7
0,7
+0,10P
4,85,1
6,4
6,1
7,2
7,1
9,5
9,1
12,710,611,1
14,2
13,1
16,2
16,1
T
5,55,8
7,1
6,8
8,8
8,8
10,4
10,2
13,611,312,3
15,2
14,4
17,2
17,4
R
8,37,7
9,8
9,5
13,3
12,7
15,5
14,5
15,316,316,3
19,8
21,3
21,5
28,5
L
12,311,7
14,2
13,5
17,5
16,7
20,5
19,5
20,521,521,3
24,5
25,3
25,5
32,9
Thicknessto be crimped
S
0,5 to 20,5 to 2
0,5 to 2
0,5 to 2
0,5 to 2
0,5 to 2
1 to 3
1 to 2
1 to 31 to 31 to 3
1 to 3
1 to 3,5
1,4 to 4
1,4 to 4
Thickness to be crimpedunlimited standard*
10
Flush head - open end -type « S »Material : Steel zinc yellow.
Stainless steel (AISI 303).
* Thicknesses to be crimped indicated in this table are not limited. If you require,we can manufacture any SERBLOCyou need.
M
3
4
5
6
8
10
12
STEEL
S 3 AS 3 A
S 4 A
S 4 A
S 5 A
S 5 A
S 6 A
S 6 A
S 8 AS 8 AS 8 B
S 10 A
S 10 A
S 12 A
S 12 A
STAINLESSSTEEL
S 3 A XS 3 A X
S 4 A X
S 4 A X
S 5 A X
S 5 A X
S 6 A X
S 6 A X
S 8 A XS 8 A XS 8 B X
S 10 A X
S 10 A X
S 12 A X
S 12 A X
D
4,75,7
6,3
6,3
7,1
7,3
9,4
9,3
12,610,511,3
14,1
13,3
16,1
16,3
E
0,40,4
0,4
0,4
0,5
0,5
0,6
0,5
0,60,60,5
0,7
0,7
0,7
0,7
+0,10P
4,85,1
6,4
6,1
7,2
7,1
9,5
9,1
12,710,611,1
14,2
13,1
16,2
16,1
T
5,55,8
7,1
6,8
8,8
8,8
10,4
10,2
13,611,312,3
15,2
14,4
17,2
17,4
R
4,54,3
6,5
5,5
7,8
7,2
9,5
8,5
9,310,310,3
13,3
15,3
14,5
19,5
L
8,58,3
10,2
9,5
12,7
11,2
14,5
13,5
14,515,514,2
18,8
19,3
19,9
23,9
Thicknessto be crimped
S
0,5 to 20,5 to 2
0,5 to 2
0,5 to 2
0,5 to 2
0,5 to 2
1 to 3
1 to 2
1 to 31 to 31 to 3
1 to 3
1 to 3,5
1,4 to 4
1,4 to 4
Thickness to be crimpedunlimited standard*
Forinformation
only
Forinformation
only
DESIGNATION DESIGNATION
The SERFIN nut, a SERBLOC derivative, hasthe same anchoring benefits as the latter. It is used for even thinnermaterials and avoids the need for further support countersinking, itscapacity is slightly less than the countersunk head SERBLOC.The same tools, manual or hydro-pneumatic, as SERBLOC are used tomount the nut whose head fits into the support and lies flush with it.The SERFIN flutes grip into the material giving greater resistance toscrewing torque.
AVDANTAGES The SERFIN nut, a SERBLOC deritative, hasthe same anchoring benefits as the latter. It is used for even thinnermaterials and avoids the need for further support countersinking, itscapacity is slightly less than the countersunk head SERBLOC.The same tools, manual or hydro-pneumatic, as SERBLOC are used tomount the nut whose head fits into the support and lies flush with it.The SERFIN flutes grip into the material giving greater resistance toscrewing torque.
ADVANTAGESSERFIN SERFIN
11
Flush head - closed end -type « SB »Material : Steel zinc yellow.
Stainless steel (AISI 303).
* Thicknesses to be crimped indicated in this table are not limited. If you require,we can manufacture any SERBLOCyou need.
M
3
4
5
6
8
10
12
STEEL
SB 3 ASB 3 A
SB 4 A
SB 4 A
SB 5 A
SB 5 A
SB 6 A
SB 6 A
SB 8 ASB 8 ASB 8 B
SB 10 A
SB 10 A
SB 12 A
SB 12 A
STAINLESSSTEEL
SB 3 A XSB 3 A X
SB 4 A X
SB 4 A X
SB 5 A X
SB 5 A X
SB 6 A X
SB 6 A X
SB 8 A XSB 8 A XSB 8 B X
SB 10 A X
SB 10 A X
SB 12 A X
SB 12 A X
D
4,75,7
6,3
6,3
7,1
7,3
9,4
9,3
12,610,511,3
14,1
13,3
16,1
16,3
E
0,40,4
0,4
0,4
0,5
0,5
0,6
0,5
0,60,60,5
0,7
0,7
0,7
0,7
+0,10P
4,85,1
6,4
6,1
7,2
7,1
9,5
9,1
12,710,611,1
14,2
13,1
16,2
16,1
T
5,55,8
7,1
6,8
8,8
8,8
10,4
10,2
13,611,312,3
15,2
14,4
17,2
17,4
R
8,37,7
9,8
9,5
13,3
12,7
15,5
14,5
15,316,316,3
19,8
21,3
21,5
28,5
L
12,311,7
14,2
13,5
17,5
16,7
20,5
19,5
20,521,521,3
24,5
25,3
25,5
32,9
Thicknessto be crimped
S
0,5 to 20,5 to 2
0,5 to 2
0,5 to 2
0,5 to 2
0,5 to 2
1 to 3
1 to 2
1 to 31 to 31 to 3
1 to 3
1 to 3,5
1,4 to 4
1,4 to 4
Thickness to be crimpedunlimited standard*
10
Flush head - open end -type « S »Material : Steel zinc yellow.
Stainless steel (AISI 303).
* Thicknesses to be crimped indicated in this table are not limited. If you require,we can manufacture any SERBLOCyou need.
M
3
4
5
6
8
10
12
STEEL
S 3 AS 3 A
S 4 A
S 4 A
S 5 A
S 5 A
S 6 A
S 6 A
S 8 AS 8 AS 8 B
S 10 A
S 10 A
S 12 A
S 12 A
STAINLESSSTEEL
S 3 A XS 3 A X
S 4 A X
S 4 A X
S 5 A X
S 5 A X
S 6 A X
S 6 A X
S 8 A XS 8 A XS 8 B X
S 10 A X
S 10 A X
S 12 A X
S 12 A X
D
4,75,7
6,3
6,3
7,1
7,3
9,4
9,3
12,610,511,3
14,1
13,3
16,1
16,3
E
0,40,4
0,4
0,4
0,5
0,5
0,6
0,5
0,60,60,5
0,7
0,7
0,7
0,7
+0,10P
4,85,1
6,4
6,1
7,2
7,1
9,5
9,1
12,710,611,1
14,2
13,1
16,2
16,1
T
5,55,8
7,1
6,8
8,8
8,8
10,4
10,2
13,611,312,3
15,2
14,4
17,2
17,4
R
4,54,3
6,5
5,5
7,8
7,2
9,5
8,5
9,310,310,3
13,3
15,3
14,5
19,5
L
8,58,3
10,2
9,5
12,7
11,2
14,5
13,5
14,515,514,2
18,8
19,3
19,9
23,9
Thicknessto be crimped
S
0,5 to 20,5 to 2
0,5 to 2
0,5 to 2
0,5 to 2
0,5 to 2
1 to 3
1 to 2
1 to 31 to 31 to 3
1 to 3
1 to 3,5
1,4 to 4
1,4 to 4
Thickness to be crimpedunlimited standard*
Forinformation
only
Forinformation
only
DESIGNATION DESIGNATION
The SERFIN nut, a SERBLOC derivative, hasthe same anchoring benefits as the latter. It is used for even thinnermaterials and avoids the need for further support countersinking, itscapacity is slightly less than the countersunk head SERBLOC.The same tools, manual or hydro-pneumatic, as SERBLOC are used tomount the nut whose head fits into the support and lies flush with it.The SERFIN flutes grip into the material giving greater resistance toscrewing torque.
AVDANTAGES The SERFIN nut, a SERBLOC deritative, hasthe same anchoring benefits as the latter. It is used for even thinnermaterials and avoids the need for further support countersinking, itscapacity is slightly less than the countersunk head SERBLOC.The same tools, manual or hydro-pneumatic, as SERBLOC are used tomount the nut whose head fits into the support and lies flush with it.The SERFIN flutes grip into the material giving greater resistance toscrewing torque.
ADVANTAGESSERFIN SERFIN
12
Hexagonal flat head - open end - type « FH »Material : Steel zinc yellow.
* Thicknesses to be crimped indicated in this table are not limited. If you require,we can manufacture any SERBLOCyou need.
M
4
5
6
8
10
C/flats
5,97
6,97
8,97
10,97
12,97
E
0,8
1,8
1,2
1,3
1,5
Punching+ 0,1
C1 0000
6
7
9
11
13
DrillP
6,85
7,85
9,95
12,15
14,25
Thicknessto be crimped
S
0,5 to 2,51,5 to 4,5
0,5 to 2,52,5 to 4,5
0,5 to 3,52,5 to 5,5
0,5 to 3,53,5 to 6,5
0,5 to 3,53,5 to 6,5
T
9
10
12
14
16
L
10,512,5
12,514,5
16,518,5
17,519,5
21,523,5
Designation
FH4FHL4
FH5FHL5
FH6FHL6
FH8FHL8
FH10FHL10
Thickness to be crimpedunlimited standard*
C/flats
9
Countersunk head - closed end - type « TFB »Material : Steel zinc yellow.
Stainless steel (AISI 303).
S
F
* Thicknesses to be crimped indicated in this table are not limited. If you require,we can manufacture any SERBLOCyou need (M14. M16. + Brass).
M
3
4
5
6
8
10
12
STEEL
3 TFB 203 TFB 30
4 TFB 204 TFB 304 TPB 40
5 TFB 205 TFB 305 TFB 40
6 TFB 206 TFB 356 TFB 50
8 TFB 308 TFB 458 TFB 60
10 TFB 3510 TFB 5010 TFB 65
12 TFB 4012 TFB 5512 TFB 70
STAINLESSSTEEL
3 TFB 20 X3 TFB 30 X
4 TFB 20 X4 TFB 30 X4 TPB 40 X
5 TFB 20 X5 TFB 30 X5 TFB 40 X
6 TFB 20 X6 TFB 35 X6 TFB 50 X
8 TFB 30 X8 TFB 45 X8 TFB 60 X
10 TFB 35 X10 TFB 50 X10 TFB 65 X
12 TFB 40 X12 TFB 55 X12 TFB 70 X
E
1,5
1,5
1,5
1,5
1,5
1,5
2,5
+0,10P
5,1
6,1
7,1
9,1
11,1
13,1
16,1
T
6,8
7,8
8,8
10,8
13,8
15,8
19,8
F
0,9
0,9
0,9
0,9
1,4
1,4
1,9
R
8,2
9,5
11,5
16,6
15,8
19,8
23,3
L
11,712,7
13,514,515,5
16,717,718,7
21,523,524,5
21,322,824,3
25,326,828,3
32,934,435,9
Thicknessto be crimped
S
1 to 2
2 to 3
1 to 22 to 33 to 4
1 to 22 to 33 to 4
1 to 22 to 3,53,5 to 5
1,5 to 33 to 4,54,5 to 6
2 to 3,53,5 to 55 to 6,5
2 to 44 to 5,55,5 to 7
Thickness to be crimpedunlimited standard*
D
5
6
7
9
11
13
16
Forinformation
only
DESIGNATION
HEXAGONAUX SERBLOC
13
Hexagonal flush head - open end - type « SFH »Material : Steel zinc yellow.
Thickness to be crimpedunlimited standard*
* Thicknesses to be crimped indicated in this table are not limited. If you require,we can manufacture any SERBLOCyou need.
M
4
5
6
8
10
C/flats
5,97
6,97
8,97
10,97
12,97
E
0,5
0,6
0,6
0,6
0,9
Punching+ 0,1
C1 0000
6
7
9
11
13
DrillP
6,85
7,85
9,95
12,15
14,25
Thicknessto be crimped
S
0,5 to 2,51,5 to 4,5
0,5 to 2,52,5 to 4,5
0,5 to 3,52,5 to 5,5
0,5 to 3,53,5 to 6,5
0,5 to 3,53,5 to 6,5
T
6,7
8,7
10,7
12,7
14,5
L
10,512,5
12,514,5
15,517,5
16,518,5
20,522,5
Designation
SFH4SFHL4
SFH5SFHL5
SFH6SFHL6
SFH8SFHL8
SFH10SFHL10
8
Countersunk head - open end - type « TF »Material : Steel zinc yellow.
Stainless steel (AISI 303).Aluminium.
F
* Thicknesses to be crimped indicated in this table are not limited. If you require,we can manufacture any SERBLOCyou need (M14. M16. + Brass).
M
3
4
5
6
8
10
12
D
5
6
7
9
11
13
16
STEEL
3 TF 203 TF 30
4 TF 204 TF 304 TF 40
5 TF 205 TF 305 TF 40
6 TF 206 TF 356 TF 50
8 TF 308 TF 458 TF 60
10 TF 3510 TF 5010 TF 65
12 TF 4012 TF 5512 TF 70
STAINLESSSTEEL
3 TF 20 X3 TF 30 X
4 TF 20 X4 TF 30 X4 TF 40 X
5 TF 20 X5 TF 30 X5 TF 40 X
6 TF 20 X6 TF 35 X6 TF 50 X
8 TF 30 X8 TF 45 X8 TF 60 X
10 TF 35 X10 TF 50 X10 TF 65 X
12 TF 40 X12 TF 55 X12 TF 70 X
E
1,5
1,5
1,5
1,5
1,5
1,5
2,5
+0,10P
5,1
6,1
7,1
9,1
11,1
13,1
16,1
T
6,8
7,8
8,8
10,8
13,8
15,8
19,8
F
0,9
0,9
0,9
0,9
1,4
1,4
1,9
R
4,8
5,5
6,7
8,6
9,8
13,8
14,3
L
8,39,3
9,510,511,5
10,511,512,5
13,514,516,5
15,316,818,3
19,320,822,3
23,925,426,9
Thicknessto be crimped
S
1 to 22 to 3
1 to 22 to 33 to 4
1 to 22 to 33 to 4
1 to 22 to 3,53,5 to 5
1,5 to 33 to 4,54,5 to 6
2 to 3,53,5 to 55 to 6,5
2 to 44 to 5,55,5 to 7
Thickness to be crimpedunlimited standard*
Forinformation
only
DESIGNATION
SERBLOC HEXAGONAUX
C/flats
14
Hexagonal flat head - open end - type « FHX ».Material : Stainless steel (AISI 303).
* Thicknesses to be crimped indicated in this table are not limited. If you require,we can manufacture any SERBLOCyou need.
M
4
5
6
8
10
C/flats
5,95
6,95
8,95
10,95
12,95
E
0,8
1,6
1,5
1,5
1,5
Punching+ 0,1
C1 0000
6,0
7,0
9,0
11,0
13,0
Thicknessto be crimped
S
0,5 to 2
0,5 to 2
1,5 to 2
1,5 to 3
1,5 to 3
T
8
9
11
14
16
L
10,3
13,3
15,3
15,7
20,3
Designation
FH4X
FH5X
FH6X
FH8X
FH10X
Thickness to be crimpedunlimited standard*
7
Large flat head - closed end - type « TPLB »Material : Steel zinc yellow.
Stainless steel (AISI 303).
Used especially in soft materials, like polyester when a greater support surface is required.
* Thicknesses to be crimped indicated in this table are not limited. If you require,we can manufacture any SERBLOCyou need (M14. M16. + Brass).
M
3
4
5
6
8
10
12
STEEL
3 TPLB 153 TPLB 253 TPLB 35
4 TPLB 154 TPLB 304 TPLB 40
5 TPLB 155 TPLB 305 TPLB 45
6 TPLB 206 TPLB 356 TPLB 50
8 TPLB 258 TPLB 408 TPLB 55
10 TPLB 2510 TPLB 4010 TPLB 55
12 TPLB 3012 TPLB 4512 TPLB 60
STAINLESSSTEEL
3 TPLB 15 X3 TPLB 25 X3 TPLB 35 X
4 TPLB 15 X4 TPLB 30 X4 TPLB 40 X
5 TPLB 15 X5 TPLB 30 X5 TPLB 45 X
6 TPLB 20 X6 TPLB 35 X6 TPLB 50 X
8 TPLB 25 X8 TPLB 40 X8 TPLB 55 X
10 TPLB 25 X10 TPLB 40 X10 TPLB 55 X
12 TPLB 30 X12 TPLB 45 X12 TPLB 60 X
D
5
6
7
9
11
13
16
E
0,8
0,8
1,0
1,5
1,5
1,5
2,0
+0,10P
5,1
6,1
7,1
9,1
11,1
13,1
16,1
T
8
10
11
13
16
19
23
R
7,7
10,5
12,2
14,8
14,8
18,8
24,5
L
12,613,614,6
14,814,815,8
17,218,720,2
20,522,523,5
22,323,825,3
26,827,529,8
34,935,537,9
Thicknessto be crimped
S
0,5 to 1,51,5 to 2,52,5 to 3,5
0,5 to 1,51,5 to 33 to 4,5
0,5 to 1,51,5 to 33 to 4,5
1 to 22 to 3,53,5 to 5
1 to 2,52,5 to 44 to 5,5
1 to 2,52,5 to 44 to 5,5
1,5 to 33 to 4,54,5 to 6
Thickness to be crimpedunlimited standard*
Forinformation
only
DESIGNATION
HEXAGONAUX SERBLOC
C/flats
15
Hexagonal flush head - open end - type « SHX »Material : Stainless steel (AISI 303).
Thickness to be crimpedunlimited standard*
* Thicknesses to be crimped indicated in this table are not limited. If you require,we can manufacture any SERBLOCyou need.
M
4
5
6
8
C/flats
5,95
6,95
8,95
10,95
E
0,5
0,5
0,5
0,5
Punching+ 0,1
C1 0000
6,0
7,0
9,0
11,0
Thicknessto be crimped
S
0,5 to 2
0,5 to 2
1,5 to 2
1,5 to 3
T
6,8
8,8
10,8
11,8
L
9,5
12,3
13,8
14,2
Designation
SH4X
SH5X
SH6X
SH8X
6
Large flat head - open end - type « TPL »Material : Steel zinc yellow.
Stainless steel (AISI 303).
Used especially in soft materials, like polyester when a greater support surface is required.
* Thicknesses to be crimped indicated in this table are not limited. If you require,we can manufacture any SERBLOCyou need (M14. M16. + Brass).
M
3
4
5
6
8
10
12
STEEL
3 TPL 153 TPL 253 TPL 35
4 TPL 154 TPL 304 TPL 40
5 TPL 155 TPL 305 TPL 45
6 TPL 206 TPL 356 TPL 50
8 TPL 258 TPL 408 TPL 55
10 TPL 2510 TPL 4010 TPL 55
12 TPL 3012 TPL 4512 TPL 60
STAINLESSSTEEL
3 TPL 15 X3 TPL 25 X3 TPL 35 X
4 TPL 15 X4 TPL 30 X4 TPL 40 X
5 TPL 15 X5 TPL 30 X5 TPL 45 X
6 TPL 20 X6 TPL 35 X6 TPL 50 X
8 TPL 25 X8 TPL 40 X8 TPL 55 X
10 TPL 25 X10 TPL 40 X10 TPL 55 X
12 TPL 30 X12 TPL 45 X12 TPL 60 X
D
5
6
7
9
11
13
16
E
0,8
0,8
1,0
1,5
1,5
1,5
2,0
+0,10P
5,1
6,1
7,1
9,1
11,1
13,1
16,1
T
8
10
11
13
16
19
23
R
4,3
6,2
6,7
8,8
8,8
11,8
15,4
L
8,69,6
10,6
10,511,312,3
11,713,214,7
14,516,517,5
16,317,819,3
19,821,322,8
24,926,427,9
Thicknessto be crimped
S
0,5 to 1,51,5 to 2,52,5 to 3,5
0,5 to 1,51,5 to 33 to 4
0,5 to 1,51,5 to 33 to 4,5
1 to 22 to 3,53,5 to 5
1 to 2,52,5 to 44 to 5,5
1 to 2,52,5 to 44 to 5,5
1,5 to 33 to 4,54,5 to 6
Thickness to be crimpedunlimited standard*
Forinformation
only
DESIGNATION
SERBLOC HEXAGONAUX
C/flats
16
Hexagonal small head - open end - type « FHTR »Material : Steel zinc yellow.
* Thicknesses to be crimped indicated in this table are not limited. If you require,we can manufacture any SERBLOCyou need.
M
4
5
6
8
C/flats
6,35
7,25
9,65
10,65
E
0,6
0,6
0,8
0,8
Punching+ 0,1
C1 0000
6,4
7,3
9,7
10,7
Thicknessto be crimped
S
0,5 to 2
0,5 to 3
0,5 to 3
0,5 to 3
T
8
9
12
13
L
10,5
11,5
14,5
16,5
Designation
FHTR4
FHTR5
FHTR6
FHTR8
Thickness to be crimpedunlimited standard*
5
* Thicknesses to be crimped indicated in this table are not limited. If you require,we can manufacture any SERBLOCyou need (M14. M16. + Brass).
M
3
4
5
6
8
10
12
STEEL
3 TPB 153 TPB 253 TPB 35
4 TPB 154 TPB 304 TPB 40
5 TPB 155 TPB 305 TPB 45
6 TPB 206 TPB 356 TPB 50
8 TPB 258 TPB 408 TPB 55
10 TPB 2510 TPB 4010 TPB 55
12 TPB 3012 TPB 4512 TPB 60
STAINLESSSTEEL
3 TPB 15 X3 TPB 25 X3 TPB 35 X
4 TPB 15 X4 TPB 30 X4 TPB 40 X
5 TPB 15 X5 TPB 30 X5 TPB 45 X
6 TPB 20 X6 TPB 35 X6 TPB 50 X
8 TPB 25 X8 TPB 40 X8 TPB 55 X
10 TPB 25 X10 TPB 40 X10 TPB 55 X
12 TPB 30 X12 TPB 45 X12 TPB 60 X
D
5
6
7
9
11
13
16
E
0,8
0,8
1,0
1,5
1,5
1,5
2,0
+0,10P
5,1
6,1
7,1
9,1
11,1
13,1
16,1
T
7
8
9
11
14
16
20
R
7,7
10,5
12,2
14,8
14,8
18,8
24,5
L
12,613,614,6
14,814,815,8
17,218,720,2
20,522,523,5
22,323,825,3
26,827,529,8
34,935,537,9
Thicknessto be crimped
S
0,5 to 1,51,5 to 2,52,5 to 3,5
0,5 to 1,51,5 to 33 to 4,5
0,5 to 1,51,5 to 33 to 4,5
1 to 22 to 3,53,5 to 5
1 to 2,52,5 to 44 to 5,5
1 to 2,52,5 to 44 to 5,5
1,5 to 33 to 4,54,5 to 6
Thickness to be crimpedunlimited standard*
Forinformation
only
DESIGNATION
HEXAGONAUX SERBLOC
C/flats
Flat head - closed end - type « TPB »Material : Steel zinc yellow.
Stainless steel (AISI 303).
17
Stud nuts flat head type « GTP »Material : Steel zinc yellow.
D
* Thicknesses to be crimped indicated in this table are not limited. If you require,we can manufacture any SERBLOCyou need.
M
4
5
6
8
REFERENCES
G4 TP 15 (L1)G4 TP 30 (L1)G4 TP 40 (L1)
G5 TP 15 (L1)G5 TP 30 (L1)G5 TP 45 (L1)
G6 TP 20 (L1)G6 TP 35 (L1)G6 TP 50 (L1)
G8 TP 25 (L1)G8 TP 40 (L1)G8 TP 55 (L1)
D
6
7
9
11
E
0,8
1,8
1,5
1,5
P
6,1
7,1
9,1
11,1
L
15,0016,5018,00
17,0018,5020,00
20,0021,5023,00
21,0022,5024,00
T
8
9
11
14
L1*
101215
101215
101520
101520
Thicknessto be crimped
S*
0,5 to 1,51,5 to 3,53,5 to 4,5
0,5 to 1,51,5 to 33 to 4,5
1 to 22 to 3,53,5 to 5
1 to 2,52,5 to 44 to 5,5
Thickness to be crimpedunlimited standard*
4
* Thicknesses to be crimped indicated in this table are not limited. If you require,we can manufacture any SERBLOCyou need (M14. M16. + Brass).
SERBLOC GOUJONSERBLOC
*
M
3
4
5
6
8
10
12
STEEL
3 TP 153 TP 253 TP 35
4 TP 154 TP 304 TP 40
5 TP 155 TP 305 TP 45
6 TP 206 TP 356 TP 50
8 TP 258 TP 408 TP 55
10 TP 2510 TP 4010 TP 55
12 TP 3012 TP 4512 TP 60
STAINLESSSTEEL
3 TP 15 X3 TP 25 X3 TP 35 X
4 TP 15 X4 TP 30 X4 TP 40 X
5 TP 15 X5 TP 30 X5 TP 45 X
6 TP 20 X6 TP 35 X6 TP 50 X
8 TP 25 X8 TP 40 X8 TP 55 X
10 TP 25 X10 TP 40 X10 TP 55 X
12 TP 30 X12 TP 45 X12 TP 60 X
D
5
6
7
9
11
13
16
E
0,8
0,8
1,0
1,5
1,5
1,5
2,0
+0,10P
5,1
6,1
7,1
9,1
11,1
13,1
16,1
T
7
8
9
11
14
16
20
R
4,3
6,2
6,7
8,8
8,8
11,8
15,4
L
8,69,6
10,6
10,511,312,3
11,713,214,7
14,516,517,5
16,317,819,3
19,821,322,8
24,926,427,9
Thicknessto be crimped
S
0,5 to 1,51,5 to 2,52,5 to 3,5
0,5 to 1,51,5 to 33 to 4
0,5 to 1,51,5 to 33 to 4,5
1 to 22 to 3,53,5 to 5
1 to 2,52,5 to 44 to 5,5
1 to 2,52,5 to 44 to 5,5
1,5 to 33 to 4,54,5 to 6
DESIGNATION
4
5
6
8
4 TP 30 PL
5 TP 30 PL
6 TP 30 PL
8 TP 30 PL
0,5 to 3
0,5 to 3
0,5 to 3
0,5 to 3
6
7
9
11
0,8
1,0
1,5
1,5
6,1
7,1
9,1
11,1
9
10
13
16
11,3
13,2
16,5
17,5
6,2
6,7
10,8
10,8
Large crimping nuts
Flat head - open end - type « TP »Material : Steel zinc yellow.
Stainless steel (AISI 303).Aluminium.
S
Forinformation
only
Thickness to be crimpedunlimited standard*
18
Special nota and technical data
Interlocutor : ............................................................................................................................................................................................................
6, rue Nationale 92100 BOULOGNE-BILLANCOURT - FrancePhone : 33 (0) 1 46 21 05 32 Fax : 33 (0) 1 46 21 00 76
3
SUMMARYPage
Technical Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Examples of different uses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
SERBLOC :Flat Head (Open ended knurled in stainless steel or steel) TP Type . . . . . . . . . . . . . . . 4
Flat Head (Blind ended knurled in stainless steel or steel) TPB Type . . . . . . . . . . . . . . . 5
Large Flat Head (Flange open ended knurled in stainless steel or steel) TPL Type . . 6
Large Flat Head (Blind ended knurled in stainless steel or steel) TPLB Type . . . . . . . . . 7
Countersunk Head (Open ended knurled in stainless steel or steel) TF Type . . . . . . . 8
Countersunk Head (Blind ended knurled in stainless steel or steel) TFB Type . . . . . . . 9
SERFIN :Flush Head (Open ended knurled) S Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Flush Head (Blind ended knurled) SB Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
HEXAGONAL :Hexagonal Flat Head (Open ended steel) FH Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Hexagonal Flush Head (Open ended steel) SFH Type . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Hexagonal Flat Head (Open ended stainless steel) FHX Type . . . . . . . . . . . . . . . . . . . 14
Hexagonal Flush Head (Open ended stainless steel) SHX Type . . . . . . . . . . . . . . . . . . 15
Hexagonal Small Head (Open ended steel) FHTR Type . . . . . . . . . . . . . . . . . . . . . . . . . 16
Stud nuts Flat Head GTP Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Special notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
More about SIMAF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Tooling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Certification ISO 9002
19
IS ALSO :
SELF-CLINCHINGSTUDS
INTERNALLY THREADEDSELF-CLINCHING NUTS
CAGE NUTfor thin metal sheet
SELF-CLINCHINGSTANDOFFS
BLIND RIVETSAvailable in large varietyot types and materials
6, rue Nationale 92100 BOULOGNE-BILLANCOURT - FrancePhone : 33 (0) 1 46 21 05 32 Fax : 33 (0) 1 46 21 00 76
2
a few applications
Mounting a support on reinforced polyster orother thin plastic sections, as well as laminated orpolywood surfaces.
Boat hulls, top hampers, car bodies, industrialvehicles, kitchen and office fittings, computers, etc.
Liquid and humidity tight assemblies.
Leaktight mounting of a support on fuel or oil tanks,upper works, etc.
Blind mounting of SERBLOC TF in a hollow section.
Refrigerating equipment, household appliances,car bodies, agricultural machinery, metal structures,etc.
Linking in a hollow section.
Metal office, garden and camping furniture, rollershutter mechanisms, etc.
Mounting of several supports with the option offixing other connected elements.
Protective and decorative internal aven plates, lifts,service elevators, tractor cabins, ski lifts, construc-tion equipment, refrigeration equipment, etc.
Mounting a hollow section on a wooden supportplatform.
Office furniture, rolling stock, naval construction, tophampers, etc.
SERBLOC TP
SERBLOC TPB
SERBLOC TP
SERBLOC TF
SERBLOC TF SERBLOC TP
GOUJON
SERECROU
COLONNETTE
SERBLIND
SERCAGE
20
manualmountingtools for
small series
SER 250 B
A HAND CLAMP with manual screwing and unscrewingof SERBLOC.To mount SERBLOC - M3, M4, M5 steel nuts and M6aluminium nuts.Sold with M3, M4, M5 and M6 tools.
A HAND CLAMP with a rapid screwing and unscrewingdevice.SER 340 : To mount SERBLOC M4 to M6.SER 370 : To mount SERBLOC M6 to M10.Sold with their tools.
A HAND CLAMP with two levers and a rapid screwingand unscrewing device.To mount SERBLOC nuts in the M6 to M14 range.Sold with are tooling.
SER 500
SER 340 - SER 370
semi-automaticmountingtools for
large series
SER 4500
PNEUMO-OIL device with a single trigger for screwing,tightening and unscrewing.To mount SERBLOC nuts in the M8 to M16 range, in largeseries.Sold with M10 to M12 tools.
PNEUMO-OIL compact device with automatic screwingof bolts by pressing the connecting mandrel.To mount SERBLOC nuts in the M3 to M8 range, in diffi-culty accessible places.Sold with M3 to M8 tools.
PNEUMO-OIL device with a single trigger for screwing,thightenius and unscrewing. To mount SERBLOC wits fromM3 to M10 range, in large series.Sold with M3 to M10 tools.
SER 3600
SER 3400
1
TIGHTENING TORQUE (Nm)
M
3
4
5
6
8
10
12
Steel SERBLOC
2,0
5,0
12,0
30,0
51,0
70,0
100,0
Aluminium SERBLOC
0,6
2,0
4,0
8,0
15,0
16,0
38,0
Steel SERBLOC
3 950
5 390
7 740
10 584
15 680
19 110
32 500
Aluminium SERBLOC
2 600
4 215
5 390
5 880
7 750
10 260
14 360
Steel SERBLOC
1 900
2 845
4 361
6 270
7 250
7 450
9 600
Aluminium SERBLOC
2 900
1 765
2 595
2 945
4 165
4 560
7 350
EXTRACTION LOAD (N) SHEARING (N)
anchoring flutes forADDITIONAL
SECURITY
antirotation
blind rivet nut
TECHNICAL CHARACTERISTICS
Values given in this table are for information purposes only.
TIGHTENING TORQUEIt should be noted that all tests were performed using steel treated bolts with a breaking load (R) of 2100 N/mm2 and anelastic limit (E) of 1800 N/mm2.In comparison, standard bolts of soft steel have much lower resistances, r = 450 N/mm2, E = 250 N/mm2. For example, in therecommended tightening torques (C) and tensile load (T), for soft and treated steel bolts. R = 1300 N/mm2, 5 = 900 N/mm2.
Tightening torques and tensile loads on the bolt have been defined at 3/4 of the bolt elastic limit for a friction coefficientof 0.12, corresponding to carefully manufactured, mounted and lubricated bolts. For the same sort of bolt and with a givendiameter, tensile loads are proportional to lightening torque.Consequently, if one applies a 20 Nm torque to a soft steel bolt with a diameter of 10, the tensile load will be : 10.870 x 20 = 11.625 N. Inversely, the torque causing a load of 9,800 N will be : 18.7 x 9.800 = 16.8 Nm
18.7 10.870
EXTRACTION LOADS (Fe)These vary depending on the thickness of support to be crimped (S) and can be calculated by using the following formula :Fe = 0.5 x S1,5 x D x La (D = SERBLOC barrel diameter, La = apparent elastic limit).
SERBLOC SHEARING RESISTANCEFigures in the table have been obtained using dimensionally stable sections without the bolt being fixed.
Ø
4
5
6
C (Nm)
1,2
2,5
3,9
C (Nm)
4,2
8,1
14,0
T (Nm)
1 650
2 660
3 770
T (Nm)
5 900
9 600
13 600
8
10
12
C (Nm)
9,3
18,7
31,8
C (Nm)
33,6
67,2
114,0
T (Nm)
6 860
10 870
15 800
T (Nm)
24 700
39 150
56 900
ØSOFT STEEL SOFT STEELTREATED STEEL TREATED STEEL
SERBLOC
IMP
. D
ALI
GA
ULT
- V
IRO
FLA
Y -
01
3024
0206
Quality is our main vocation
6, rue Nationale 92100 BOULOGNE-BILLANCOURTPhone : 33 (0) 1 46 21 05 32 Fax : 33 (0) 1 46 21 00 76
By adapting our production to new technologies,we have managed to gain the confidence
of both small entreprisesand major international corporations,
in leading economic sectors like the automobileindustry, household appliances, telephone,
office automation, computer technology, etc.
SIMAF PRODUCTION has a golden ruleof permanent control,from manufacture to distributionwhich has guaranteed a constant qualityof our production.
Our production tools are perfectlywell adapted to the manufacture of simple or
complex machine parts in different types ofmaterial such as : steel, stainless steel,
brass, plastics, and this for small,medium and high volume.
antirotation
blind rivet nut
When setting, the flutes anchor the SERBLOCnut in the support, giving it considerable clamping strength.
Torque resistance is higher than that of a class 6.8 steel screw.
Support preparation.The cylindrical housing P can be made by punching or drilling. For countersunk heads, provide a countersink F that allowsthe SERBLOC to protrude the support surface by 0.1 mm. It is essential to respect dimension P in our tables.
It is important to choose exactly, depending on use :– the diameter of the screw to be used– the material and finish of the SERBLOC– the type of head : standard flat head « TP », large « TPL », countersunk head « TF », SERFIN « S »– its characteristics, open or closed B, for reasons of leakproofing and corrosion– the thickness to be crimped of the support S determines the SERBLOC reference mentioned on each of our tables and
corresponds to the crimping range contained between minimum and maximum thickness that the SERBLOC canconveniently crimp.
The SERBLOC nuts can be in : zinc plated, yellow chromating STEEL orwith other forms of protection on demand - BRASS - ALUMINIUM alloys -STAINLESS STEEL.
The SERBLOC nut is fluted to allow blind fastening in metal sheets, plastic, wood andother conglomerate materials like laminated Isorel or similar products.
AND EVERYWHERE WHEN :– the support is too thin for resistant threading– blind mounting is necessary because the other side of the support is unaccessible (tubes - hollow sections)– a removable mounting is required– crimping of one or several parts that are to be screw-mounted to other parts– inserting threading in painted, polished, enamelled parts is delicateFurthermore, recessed threading makes the SERBLOC nut leakproof to fluid and humidity.
ADVANTAGES
APPLICATIONS
MOUNTING
1 - Screw the SERBLOC nutinto the screw rod of the toolabutting on the machinenosepiece.
2 - Insert the SERBLOC nut inthe hole drilled in the support.
3 - Actuate the handles or thetrigger of the mounting tool.Traction is produced onthe threaded section ofthe SERBLOC nut, causingthe cylindrical drum onthe mock or blind side toexpand fixing the SERBLOCin its support.
4 - Now that the SERBLOC nutis fixed, complete securityis provided. The flutes havepenetrated the supportto be crimped, anchoringthe SERBLOC nut.Unscrew the screw rodof the mounting tool.
5 - The SERBLOC nut is readyfor screw or attachmentmounting providing a solidthreading in thin or hollowelements.
outil de pose outil de pose
MATERIAL AND FINISH
SERBLOC CHOICE
Anchoring flutes forADDITIONAL
SECURITY
rapid assembly conical barre
Flat headTP or TPL
Countersunk headTF
SerfinS
Thicknessto be crimped
SERBLOC