serdia2010 – how to install / uninstall - deutz...

12
SERDIA2010 – How to Install / Uninstall Some Hints for proper work Version 2.0 / 02.06.16 1. Installation 1.1 Download SerDia2010 is downloadable from http://serdia.deutz.com/ At the moment Serdia2010-Download has a volume of 1GB and the license-file is about 5Mbytes.

Upload: lykhanh

Post on 29-Jun-2018

776 views

Category:

Documents


22 download

TRANSCRIPT

SERDIA2010 – How to Install / Uninstall Some Hints for proper work Version 2.0 / 02.06.16

1. Installation

1.1 Download

SerDia2010 is downloadable from http://serdia.deutz.com/

At the moment Serdia2010-Download has a volume of 1GB and the license-file is about 5Mbytes.

SERDIA2010 – How to Install / Uninstall Some Hints for proper work Version 2.0 / 02.06.16

1.2 Minimum Requirements for SerDia2010

1.2.1 Personal Computer (PC)

PC: Windows XP: 2.4 GHz and 2GB RAM Windows 7: 2.4 GHz and 4GB RAM Windows 8 and 10: 2.4 GHz and 6 GB RAM

About 2GByte free disk space, Screen min. 1024x768 pixel, One free USB-Port (2.0/3.0) OS: MS-Windows XP SP3, VISTA, Windows 7 (64bit or 32 bit), Windows 8,

Windows 10 Admin-Rights during Installation New SerDia-Path: C:\Deutz\SerDia\....... Full access after installation for following directories

C:\DEUTZ\*.* ; C:\Programme\DEUTZ\*.* ; C:\Programme\samtec\*.* ; C:\Programme\Sontheim \*.*

1.2.2 Interface DECOM Interface or existing HS-Light Supplier for DECOM with license is your local DEUTZ dealer 1.2.3 Software & License For each Interface you will need a SerDia2010-License, which must be purchased at your local DEUTZ dealer.

(Old SerDia2000 will work as usual with HS-Light.)

After install you will be able to start a trial version of SerDia2010. Within 2 weeks you must download a new license-file and put it into your installation. If you do not so SerDia2010 will not work any longer, after this period.

License-Files are not downwards-compatible. 1.2.4 Engine Application:

SerDia2010 supports DEUTZ-TIER4-engines with ECU-Type EMR4 and Tier3 and Tier2 engines with EMR3 and EMR2 ECUs.

SERDIA2010 – How to Install / Uninstall Some Hints for proper work Version 2.0 / 02.06.16

2 Copy Exe-File on your Harddisk

2.1 execute File (unpacking)

Choose a place on your harddisk, where the installfiles can be copied to and click "extract"-button.

2.2 Start "setup.exe" to install SerDia2010

Please, do not plugin the interface yet. You need ADMIN-Rights for installation.

SERDIA2010 – How to Install / Uninstall Some Hints for proper work Version 2.0 / 02.06.16

Choose your for installation. (Serdia2010 language has to be setted later after starting Serdia2010)

Click "Install"-Button

SERDIA2010 – How to Install / Uninstall Some Hints for proper work Version 2.0 / 02.06.16

MICROSOFT´s “LOGO TEST” � Ignore and click on install-Button

SERDIA2010 – How to Install / Uninstall Some Hints for proper work Version 2.0 / 02.06.16

To fix all registry entries, reboot your computer please.

Meanwhile you may see higher values of version-numbers.

SERDIA2010 – How to Install / Uninstall Some Hints for proper work Version 2.0 / 02.06.16

2.3 ADMINISTRATOR Hints

SERDIA2010 – How to Install / Uninstall Some Hints for proper work Version 2.0 / 02.06.16

3 How to check Interface connection

HS-Light Right Mouseclick on "yellow"-Tray-Icon and click Menu "about"

not OK OK

SerialNo. in Hexadecimal: 201D7 hex = 131543 dec.. See label on back of your Interface. DECOM

SerialNo. D4000 + 6E in decimal � D4000110

SERDIA2010 – How to Install / Uninstall Some Hints for proper work Version 2.0 / 02.06.16

How to activate the HS-Light Interface

When your PC has got another SerDia2000-Installation, then you will have now two Configuration-Center for the HS.Light-Interface.

For SerDia2000 choose Configuration Center and for SerDia2010 choose SamPDU ConfigurationCenter. Click Find VCI (Vehicle Communication Interface). If the interface is detected, then click Save-Button and Close the Window, please.

SerDia2000 & HS-Light-Interface

SerDia2010 & HS-Light-Interface

SERDIA2010 – How to Install / Uninstall Some Hints for proper work Version 2.0 / 02.06.16

Start diagnosis software "SerDia2010"

Pages may vary from release to release Connect your Interface to the EDC17-ECU and double-click on the Desktop-ICON.

Starting Page with connected ECU and well known ECU-Software

If ECU is shut off or ECU-Firmware is not implemented, the diagnosis software is not able to log into the connected ECU. Nevertheless you are able to flash the ECU.

SERDIA2010 – How to Install / Uninstall Some Hints for proper work Version 2.0 / 02.06.16

4 Uninstall

Sometimes it is necessary to clean the directory and delete the Serdia-Installation completely before a new Serdia-Installation is started. The following steps must be fulfilled.

SERDIA2010 – How to Install / Uninstall Some Hints for proper work Version 2.0 / 02.06.16