series 200 - industrial controls temperature table 3 temperature coefficient = .00385 per iec 751 c...

SER

IES 2

00

BURNSENGINEERING INC. W

ire

Wou

nd R

TD T

empe

ratu

re S

enso

rs a

nd T

rans

mitt

ers

BURNSENGINEERING INC.

SERIES 200....SERIES 200....A History of QualitySince 1960, Burns Engineering has been an industry leader in the design and manufacture of temperaturesensors for the process and OEM industries. During that time, product quality and customer service along withinnovative design techniques have been top priorities in the Burns Engineering business philosophy. Our driveto improve product quality is reflected in the Series 200, a “second” generation of RTD’s that are more accurate,repeatable, stable and durable than anyprevious models.

Designed for ReliabilityThe Series 200 is an “off-the-shelf” RTDthat meets real world conditions forextended periods of time. Its unique designand construction features improve the durability of the Series 200without affecting its accuracy.

Burns CS Element Construction - This proprietary element isconstructed with a high purity platinum wire that is coil wound tominimize stress and assure accurate readings over long periods oftime. Each coil is fully suspended in a high purity ceramic insulatorand surrounded by a ceramic powder with a new binder additive. The"Burns Coil Suspension (CS) Element" enhances vibration and shockresistance without interfering with the coils ability to expand orcontract. High strength platinum alloy leads have been increased insize to improve durability and insure that the RTD does not opencircuit in tough applications.

Sheath Design & Construction - A proprietary manufacturingtechnique that forms the metallurgical bond between the element leads

and the internal sheath leads virtually eliminateslead wire short out. And when encapsulated

with compacted ceramics, assuresdurability and fast time response over thelife of the sensor. The Series 200 designuses mineral insulated sheath with aminimum bend radius of 3/4 inch to

accommodate installations requiringflexibility and durability.

The Standard for RTD Technology.

99.8% High Purity Insulator

High Strength PlatinumAlloy Lead Wires

0.08

5 [7] 10 [14] 15 [21]

0.06

0.04

0.02

0.000

Acceleration Level (g's RMS) [Peak ]

Cha

nge

from

Initi

al (°

C)

Long Term Stability (Drift) - Fig.1

Vibration Resistance (30 min. duration) - Fig.2

Long Term Temperature Cylcling - Fig.3

0.4

0.3

0.2

0.1

0.00 200 400 600 800 1000

Elapsed Time (hours)

Cha

nge

from

Initi

al (°

C)

500°C

400°C

300°C

0.3

0.2

0.1

0.0

Number of Thermal Cycles (20 to 500°C)

Cha

nge

from

Initi

al (°

C)

0 200 400 600 800 1000

Type “A” General Purpose Direct Immersion Assembly —Page 4

Suitable for mounting into tanks, pipes, ovens, furnaces, ducts, kilns, process vessels and more.

Type “C” Spring Loaded for Thermowell Assembly — Page 6

Ideal for flow rates or product viscosity that would damage a more delicate direct immersionprobe. Spring loading provides protection from strong vibrations. Element can be easilyremoved from the thermowell without removing the connection head, extension nipple, orrelated conduit and wiring.

Type “K” Bayonet, Twist-lock, Spring Loaded for Thermowell Assembly —Page 6

Features easy access to the element with its quarter-turn bayonet lock fitting which engages withthe Burns number 5 explosion proof connection head.

Type “L” Spring Loaded Hex Fitting for Thermowells — Page 9

Features Burns’ self contained spring loaded hex fitting. This makes it ideal for mating tovirtually any connection head or transmitter assembly.

Type “G” Capsule Style —Page 12

Can resist 100% relative humidity. Ideal for environmental chambers, underground conduits, etc.

Series 200 is a collection of the most frequently requested designs for industrial temperaturemeasurement. These standard sensors look like familiar configurations on the outside, but on theinside, they are different. All Series 200 RTDs are built for high reliability and stability to meet the tough operating conditions noted in the specifications.

SENSOR CONFIGURATIONS1

TO ORDER CALL 800-328-3871 FAX 952-935-8782

TRANSMITTERS—PAGE 20

2 SERIES 200: SPECIFICATIONS

Time constant: Four seconds maximum for 63.2% responseto step change in water moving at 3 fps.Insulation resistance: Will remain greater than 500 megohms@ 500 VDC, 20°C for at least 30 days at 100% relative humidity.Repeatability: Less than ± .04% change in ice point resistanceafter 10 consecutive cycles between -200 and 500°C.Long term stability: Less than ± .05% (± .13°C for a 100 ohmRTD) ice point resistance shift after 1000 hours at 400°C. (ref.fig. #1 inside front cover)

Vibration resistance: Less than ± .03% (± .075°C for a 100 ohmRTD) ice point shift for 30 minutes at 21g peak vibration; 5-350 Hz continuous sweep, at 20°C for unsupported stemlengths of 5-1/2 inches or less. (ref. fig. #2 inside frontcover) Long term Temperature Cycling: Less than ± .1% (± .25°C fora 100 ohm RTD) change in ice point resistance after 1000cycles from 20 to 500° C. Ref. fig. #3 inside front cover)Self heating: 18mW/°C in water moving at 3 fps.Bending radius: Sheath is bendable on a minimum radius of 3/4inch except for 2˝sensitive area of sheath near tip.Hysteresis: .04% maximum between -200 and 500°C.Lead Wire: Teflon™ insulated nickel-plated stranded copper, 22AWG standard (24 AWG for dual). Also available in fiberglassand Kapton™.Sheath Material: High purity compacted ceramic insulation with316 stainless steel sheath. Also available with Inconel™ 600sheath.

PROOF TESTS TO PROVE RELIABILITY

100% Tested: For accuracy at 0°C and insulation resistance forshort time at ambient temperature and humidity.Sample Tested: For accuracy at 0°, 200° and 420°C. Insulationresistance at 20°C for 30 days at 100% relative humidity.Repeatability after 10 cycles between -200° and 500°C.Long term stability after 1000 hours at 400°C.Vibration resistance per ASTM procedure E644 to abovestated parameters.

MAXIMUM TEMPERATURE REFERENCE

500°C maximum temperature with 316 SS Sheath

932°F maximum temperature with 316 SS Sheath

200°C maximum temp.

392°F maximum temp.w/teflon insulation

100°C for vinyl boot

• A - Three wire • B - True 4 wire • C - 3 wire dual

COLOR CODES

Element Resistance: 100 ohms at 0°C nominalTemperature Coefficient of Resistance: .00385 ohms/ohm/°CnominalTemperature range: -200°C to 500°CAccuracy: Available with Accuracy of ±.10% and ±.05% ofresistance at 0°C with typical alpha accuracy of .00385 ±.000005 ohms/ohm/°C.Interchangeability: For 100 ohm elements the tolerance valuesat any temperature for these specifications are given by: Tolerance°C = ±(.13 + .00185 ItI) for accuracy code 05,Tolerance°C = ±(.26 + .0037 ItI) for accuracy code 10 ( ItI =absolute value of temperature in °C i.e. -100 becomes 100)

Green

Green

Black

Red

Red

White

White

White

White

Red

Red

Red

Red

Use Max. Drift After Avg. Drift AfterTemperature 1000 Hours 1000 Hours

To 300°C .06°C .03°CTo 400°C .13°C .06°CTo 500°C .38°C .19°C

Element/Lead Wire Configuration

°C (F°) .05% .10%

-200 (-328) ±.50°C (.90) ±1.00°C (1.80)-100 (-148) ±.32°C (.57) ±.64°C (1.15)

0 (32) ±.13°C. (.23) ±.26°C (.46)100 (212) ±.32°C (.57) ±.64°C (1.15)200 (392) ±.50°C (.90) ±1.00°C (1.80)300 (572) ±.69°C (1.24) ±1.38°C (2.48)400 (752) ±.87°C (1.56) ±1.74°C (3.13)500 (932) ±1.06°C (1.90) ±2.12°C (3.82)

InterchangeabilityTemperature

3RESISTANCE TEMPERATURE TABLETEMPERATURE COEFFICIENT = .00385 PER IEC 751

°C Ohms °C Ohms °C Ohms °C Ohms °C Ohms

°C Ohms

220 183.19230 186.84240 190.47250 194.10260 197.71270 201.31280 204.90290 208.48300 212.05310 215.61320 219.15330 222.68340 226.21350 229.72

-200 18.52-190 22.83-180 27.10-170 31.34-160 35.54-150 39.72-140 43.88-130 48.00-120 52.11-110 56.19-100 60.26-90 64.30-80 68.33-70 72.33

-60 76.33-50 80.31-40 84.27-30 88.22-20 92.16-10 96.090 100.0010 103.9020 107.7930 111.6740 115.5450 119.4060 123.2470 127.08

80 130.9090 134.71100 138.51110 142.29120 146.07130 149.83140 153.58150 157.33160 161.05170 164.77180 168.48190 172.17200 175.86210 179.53

360 233.21370 236.70380 240.18390 243.64400 247.09410 250.53420 253.96430 257.38440 260.78450 264.18460 267.56470 270.93480 274.29490 277.64500 280.98

°C Ohms

450 187.65460 189.67470 191.68480 193.70490 195.71500 197.71510 199.71520 201.71530 203.71540 205.70550 207.69560 209.67570 211.66580 213.63590 215.61600 217.58610 219.55620 221.51630 223.47640 225.42650 227.38660 229.33670 231.27680 233.21690 235.15700 237.09

-330 18.04-320 20.44-310 22.83-300 25.20-290 27.57-280 29.93-270 32.27-260 34.61-250 36.94-240 39.26-230 41.57-220 43.88-210 46.17-200 48.46-190 50.74-180 53.02-170 55.29-160 57.55-150 59.81-140 62.06-130 64.30-120 66.54-110 68.77-100 71.00-90 73.22-80 75.44

-70 77.66-60 79.86-50 82.07-40 84.27-30 86.47-20 88.66-10 90.850 93.0310 95.2120 97.3930 99.5740 101.7450 103.9060 106.0770 108.2380 110.3890 112.53100 114.68110 116.83120 118.97130 121.11140 123.24150 125.37160 127.50170 129.62180 131.74

190 133.86200 135.97210 138.08220 140.19230 142.29240 144.39250 146.49260 148.58270 150.67280 152.75290 154.83300 156.91310 158.98320 161.05330 163.12340 165.18350 167.24360 169.30370 171.35380 173.40390 175.45400 177.49410 179.53420 181.56430 183.59440 185.62

710 239.02720 240.95730 242.87740 244.79750 246.71760 248.62770 250.53780 252.44790 254.34800 256.24810 258.14820 260.03830 261.92840 263.80850 265.68860 267.56870 269.44880 271.31890 273.17900 275.04910 276.90920 278.75930 280.61

°F Ohms °F Ohms °F Ohms °F Ohms °F Ohms

Degrees Fahrenheit

Degrees Celsius

Interchangeability: Tolerance°C = ±(.13 + .00185 ItI) for accuracy code 05Tolerance°C = ±(.26 + .0037 ItI) for accuracy code 10( ItI = absolute value of temperature in °C i.e. -100 becomes 100)

TO ORDER CALL 800-328-3871 FAX 952-935-8782

SERIES 200: TYPE ‘A’ GENERAL PURPOSEDIRECT IMMERSION PLATINUM RTD

A versatile design suitable for mounting into tanks, pipes, ovens, ducts, process vessels, etc.

The type 316 Stainless Steel sheath and hex fitting are TIG welded for maximum strength

and corrosion resistance.

Type A sensor with No. 10 explosion proofhead and loop poweredindicating transmitter.

Type A sensor with No. 5 explosion proofconnection head.

Type A sensor with No. 1 weather proofconnection head.

Type A sensor withindividual Tefloninsulated lead wiresstripped and tinned.

For options see page 13

4

No. 5 explosion proof connection head

TIG weld

Process connection thread

Y L

Head connection thread

DDo not bend sensor within 2 inches of tip

Type 'A' sensor

No. 1 weather proof connection head

Model TLI indicating transmitter

-

No. 10 explosion proof connection head with window

170

SERIES 200: TYPE ‘A’ GENERAL PURPOSE DIRECTIMMERSION PLATINUM RTD — ORDERING INFORMATION

10 ± .10% at 0°C05 ± .05% at 0°C

A Three wire single elementB True four wire single elementC Three wire dual element

1C Cast iron weatherproof1E Epoxy coated cast iron weatherproof2A Aluminum weatherproof2E Epoxy coated aluminum weather proof5A Explosion proof aluminum (use with TL transmitter)5E Epoxy coated aluminum (use with TL transmitter)9P Polypropylene

10A Explosion proof aluminum with window for TLI indicating transmitter(When ordering 10A head, specify LY12 for 12” leads in option square below)

14S Stainless SteelN No connection head

035 3.5 inch 055 5.5 inch 085 8.5 inch 115 11.5 inch 175 17.5 inch 235 23.5 inch

Specify sheath length in inchesExample: For a 6.0 inch L length specify 060

For a 13.5 inch L length specify 135

L

200A

Options Transmittersee page 13

Code Sheath length L

Code Element/Lead Wire Configuration

200A Code Accuracy Options

TIG weld

Process connection threads(1/2 inch NPT std.)Head connection threads

(1/2 inch NPT std.)

Sheath Diameter (1/4 inch diameter std.)

316 SS sheath

316 SS fitting

Lead wire material/configuration(Teflon insulated/individuallead wires std.)

Sheath length

Do not bend in this area2 inches

Lead wire termination(Stripped and tinned std.)

Lead length Y(3.5 inch length std.)

L

D

5

Leave blank if none required

Code Connection head

Basic order code

TO ORDER CALL 800-328-3871 FAX 952-935-8782

See page 7 for type C or K sensors without thermowell - length code X is used.See page 8 for type C or K sensors with thermowell - length code U is used.

SERIES 200: TYPE ‘C’ AND ‘K’ SPRING LOADEDPLATINUM RTD AND THERMOWELL

High vibration endurance - The RTD and thermowell are kept in constant firm contact to prevent thesensor assembly from vibrating against the thermowell. The compacted mineral insulated sheathwith high strength, corrosion resistant lead wires is the most durable construction possible.

Improved heat transfer - Faster response to temperature changes result from positive thermal contact.

Ease of installation - The thermowell, nipple and head may be installed without the sensor. The sensor may beinserted or removed through the head and secured in place by means of the terminal block or twist lock fitting.

Wide selection of wells - See page 19 for thermowell styles and options.

Type C spring loadedsensor with nippleextension andthermowell for use withnumber 1, 2 and 9connection heads.

Type K bayonet, twist-lock, spring loadedsensor with nippleextension andthermowell for use withnumber 5 connectionhead only.


6

.25˝Extension

Connection head

T

1.75

Thermowell

A

U

N

Y

X1.5

Overall Length (OAL)

Transmitter option

1.75

.25"

1.5


T

A

U

N

Y

X

SERIES 200: TYPE ‘C’ AND ‘K’ SPRING LOADED PLATINUM RTDORDERING INFORMATION WWWWIIII TTTTHHHHOOOOUUUUTTTT THERMOWELL

C Spring loaded sensor for thermowell applicationsK Spring loaded sensor with Bayonet fitting for thermowell applications (mates with #5 head)

10 ± .10% at 0°C05 ± .05% at 0°C

1C Cast iron weatherproof1E Epoxy coated cast iron weatherproof2A Aluminum weatherproof2E Epoxy coated aluminum weatherproof5A Explosion proof aluminum (mates with type K sensor ) *5E Epoxy coated aluminum (mates with type K sensor) *9P Polypropylene14S Stainless SteelN No connection head

1A Galvanized nipple2A 304 SS nipple3A 316 SS nipple1B Galvanized nipple-union-nipple2B 304 SS nipple-union-nipple3B 316 SS nipple-union-nippleN No extension

Specify in inchesExample: For a 9.0 inch Xlength specify 090For a 12.5 inch X length specify 125


200

Code Extension type


Code Element/Lead wire configuration

Code Accuracy Options

(3.5 Inch length std.)Sheath length

1.5


Lead wire material/configuration(Teflon insulated/individual lead wire std.)

316 SS Sheath

Type K bayonet fitting

Y X

(X = OAL - 1.5˝)

Type C

Type K

Lead wire termination(stripped and tinned std.)

200 Code Sensor type


7

XCode Sheath Length X


X Sheath length

Y Lead wire length

N Extension length

A Well bore depth

U Well immersion length

T Well lag length

For threaded &

socket wells For flanged wells

X = OAL - 1.5X = N + A

A =U + T + 1.5X = N + U + T + 1.5

X = OAL - 1.5X = N + A

A =U + T + 2X = N + U + T + 2

Length codes Equations

Length Codes and Equations

Basic order code

* (use with TL trasmitter)

TO ORDER CALL 800-328-3871 FAX 952-935-8782

Basic order code

SERIES 200: TYPE ‘C’ AND ‘K’ SPRING LOADED PLATINUM RTDORDERING INFORMATION WWWW IIII TTTT HHHH THERMOWELL

8

C Spring loaded sensor for thermowell applicationsK Spring loaded sensor with Bayonet fitting for thermowell applications (mates with #5 head only)

10 ± .10% at 0°C05 ± .05% at 0°C

1C Cast iron weatherproof1E Epoxy coated cast iron weatherproof2A Aluminum weatherproof2E Epoxy coated aluminum weatherproof5A Explosion proof aluminum (mates with type K sensor) *5E Epoxy coated aluminum (mates with type K sensor) *9P Polypropylene14S Stainless SteelN No connection head

1A Galvanized nipple2A 304 SS nipple3A 316 SS nipple1B Galvanized nipple-union-nipple2B 304 SS nipple-union-nipple3B 316 SS nipple-union-nipple


200

Code Extension type



Code Accuracy Options

Immersion Length UChoose from one of thecolumns below

Threaded & socket wellsA = U + T + 1 . 5

Code Length “U”025 2.5 Inches045 4.5 Inches075 7.5 Inches105 10.5 Inches135 13.5 Inches165 16.5 Inches

Flanged wellsA = U + T + 2 . 0

Code Length “U”040 4.0 Inches070 7.0 Inches100 10.0 Inches160 16.0 Inches

Threaded thermowells

TT2 Tapered, threaded, 1/2 ̋NPT threadsTT3 Tapered, threaded, 3/4 ̋NPT threadsTT4 Tapered, threaded, 1 ̋NPT threadsRT2 Reduced tip,threaded, 1/2˝NPT threadsRT3 Reduced tip,threaded, 3/4˝NPT threadsRT4 Reduced tip, threaded, 1˝NPT threads

Socket weld thermowells

TW4 Tapered, welded, 1˝ pipe sizeTW5 Tapered, welded, 1.25˝ pipe sizeRW3 Reduced tip, welded, 3/4˝ pipe sizeRW4 Reduced tip, welded, 1˝ pipe size

Raised face flanged thermowells

TF4A Tapered, 1.0˝ flange, 150 LBTF6A Tapered, 1.5˝ flange, 150 LBTF8A Tapered, 2.0˝ flange, 150 LBTF4B Tapered, 1.0˝ flange, 300 LBTF6B Tapered, 1.5˝ flange, 300 LBTF8B Tapered, 2.0˝ flange, 300 LB

RF4A Reduced tip, 1.0˝ flange, 150 LBRF6A Reduced tip, 1.5˝ flange, 150 LBRF8A Reduced tip, 2.0˝ flange, 150 LBRF4B Reduced tip, 1.0˝ flange, 300 LBRF6B Reduced tip, 1.5˝ flange, 300 LBRF8B Reduced tip, 2.0˝ flange, 300 LB

Code Thermowell typeSee Page 19 for dimensions

02 304 SS03 316 SS04 Carbon Steel05 304 L Stainless Steel06 316 L Stainless Steel07 Hastelloy C27608 Chrome-Moly09 Aluminum 6061 T610 Monel11 Teflon12 Inconel 60013 Brass14 Titanium

Code Thermowell material

Extension

Connection head

Finish (16-32 microinch Ra std.)

Extension length

Bore depth

Immersion length1 3/4

N

U

A

.25˝

(3˝ std.)

T

(T = O std.)Lag length

200 Code Sensor type


Leave blank if none requiredSee page 7 for length codes, equations and replacement sensor ordering information.


See page 10 for type “L” sensor without thermowell - length code L is used.See page 11 for type “L” sensor with thermowell - length code U is used.

SERIES 200: TYPE ‘L’ SPRING LOADEDHEX FITTING PLATINUM RTD THERMOWELL

Type L spring loaded sensor is ideal for mating sensors and thermowells to virtually any connectionhead or transmitter assembly. The stainless steel spring loaded fitting insures firm sensor contactwith the thermowell for faster time response and vibration resistance. The long lead wires fit eventhe largest connection head.

Type L spring loaded sensor withnumber 10connection head,indicatingtransmitter, couplingnipple extension andthermowell.

Type L springloaded sensor only.


Y

1/2" Nominal spring compression

1/2 Inch nominal thread engagement L (Uncompressed sheath length)

1.75

-

N

170

A

UT

Y

1.75

A

UT

(3˝ Standard)

N

9

TO ORDER CALL 800-328-3871 FAX 952-935-8782

Type L spring loadedsensor, union nippleextension,thermowell assemblyfor connection toexisting head ortransmitter

AAAA NNNN DDDD

Basic order code

SERIES 200: TYPE ‘L’ SPRING LOADED HEX FITTING PLATINUM RTDORDERING INFORMATION WWWWIIII TTTTHHHHOOOOUUUUTTTT THERMOWELL

10

10 ± .10% at 0°C05 ± .05% at 0°C

1C Cast iron weatherproof1E Epoxy coated cast iron weatherproof2A Aluminum weatherproof2E Epoxy coated aluminum weatherproof5A Explosion proof aluminum (mates with type K sensor) (use with TL transmitter)5E Epoxy coated aluminum (mates with type K sensor) (use with TL transmitter)9P Polypropylene10A Explosion proof aluminum with window for TLI indicating transmitter14S Stainless SteelN No connection head

Specify immersion length in inchesExample: For a 9.0 inch L length specify 090For a 12.5 inch L length specify 125

L


200L

Code Uncompressed Sheath length L



1C Galvanized Coupling nipple2C 304 SS Coupling nipple3C 316 SS Coupling nipple1D Galvanized union-nipple2D 304 SS union-nipple3D 316 SS union-nippleN No extension

Code Extension Type

Sheath Diameter

1/2 Inch nominalspring compression Process connection threads

(1/2 inch NPT std.)

316 SS sheath

(1/4 Inch diameter std.)

Optional extension fittingLead wire termination

(Stripped and tinned std.)

Lead length(12 Inch length std.)

316 SS Hex Fitting

Leadwire material/configuration(Teflon insulated/Individual lead wires std.)

Head connection threads(1/2 Inch NPT std.)

(Uncompressed sheath length)LY

D

Specify lead option LY4 for heads other than 10A

200L Code Accuracy options



L Uncompressed sheath

Y Lead wire length

N Extension length

A Well bore depth

U Well immersion length

T Well lag length

For threaded &socket wells For flanged wells

L = N + AA =U + T + 1.5

L = N + U + T + 1.5

L = N + AA =U + T + 2

L = N + U + T + 2

Length codes Equations

Length Codes and Equations

Basic order code

SERIES 200: TYPE ‘L’ SPRING LOADED HEX FITTING PLATINUM RTDORDERING INFORMATION WWWW IIII TTTT HHHH THERMOWELL

10 ± .10% at 0°C05 ± .05% at 0°C

1C Cast iron weatherproof1E Epoxy coated cast iron weatherproof2A Aluminum weatherproof2E Epoxy coated aluminum weatherproof 5A Explosion proof aluminum (mates w/ type K sensor) *5E Epoxy coated aluminum (mates w/ type K sensor) *9P Polypropylene10A Explosion proof aluminum head with window for TLI indicating transmitter14S Stainless SteelN No connection head

1C Galvanized nipple-coupling2C 304 SS nipple-coupling3C 316 SS nipple-coupling1D Galvanized nipple-union2D 304 SS union-nipple3D 316 SS union-nippleN No Extension N=O


Code Extension type



Immersion Length UChoose from one of thecolumns below

Threaded & socket wellsA = U + T + 1 . 5

Code Length “U”025 2.5 Inches045 4.5 Inches075 7.5 Inches105 10.5 Inches135 13.5 Inches165 16.5 Inches

Flanged wellsA = U + T + 2 . 0

Code Length “U”040 4.0 Inches070 7.0 Inches100 10.0 Inches160 16.0 Inches

Threaded thermowells

TT2 Tapered, threaded, 1/2˝ NPT threadsTT3 Tapered, threaded, 3/4˝ NPT threadsTT4 Tapered, threaded, 1˝ NPT threadsRT2 Reduced tip,threaded, 1/2˝NPT threadsRT3 Reduced tip,threaded, 3/4˝NPT threadsRT4 Reduced tip, threaded, 1˝NPT threads

Socket weld thermowells

TW4 Tapered, welded, 1˝ pipe sizeTW5 Tapered, welded, 1.25˝ pipe sizeRW3 Reduced tip, welded, 3/4˝ pipe sizeRW4 Reduced tip, welded, 1˝ pipe size

Raised face flanged thermowells

TF4A Tapered, 1.0˝ flange, 150 LBTF6A Tapered, 1.5˝ flange, 150 LBTF8A Tapered, 2.0˝ flange, 150 LBTF4B Tapered, 1.0˝ flange, 300 LBTF6B Tapered, 1.5˝ flange, 300 LBTF8B Tapered, 2.0˝ flange, 300 LB

RF4A Reduced tip, 1.0˝ flange, 150 LBRF6A Reduced tip, 1.5˝ flange, 150 LBRF8A Reduced tip, 2.0˝ flange, 150 LBRF4B Reduced tip, 1.0˝ flange, 300 LBRF6B Reduced tip, 1.5˝ flange, 300 LBRF8B Reduced tip, 2.0˝ flange, 300 LB

02 304 S.S.03 316 S.S.04 Carbon Steel05 304 L Stainless Steel06 316 L Stainless Steel07 Hastelloy C27608 Chrome-Moly09 Aluminum 6061 T610 Monel11 Teflon12 Inconel 60013 Brass14 Titanium

Code Thermowell material

200L

Y

1.75˝(12 inch length std.)Union-nipple extension

316 SS Hex Fitting

Lead wire termination(Stripped and tinned std.)

Leadwire material/configuration(Teflon insulated/Individual lead wires std.)

Head connection threads(1/2 Inch NPT std.)

ThermowellN

T

Specify lead optionLY4 for heads other than 10A

Extension Length3˝ std.

.25˝

U

ABore Depth

*

Immersion Length

* Lag Length (T=0 std.)

200L Code Accuracy options



11

See page 10 for Length Codes and Equations

Code Thermowell typeSee Page 19 for dimensions


TO ORDER CALL 800-328-3871 FAX 952-935-8782

Basic order code

12 SERIES 200: TYPE ‘G’ CAPSULE STYLE PLATINUM RTD

TYPE ‘G’ ORDERING INFORMATION

10 ± .10% at 0°C05 ± .05% at 0°C

035 3.5 Inch 055 5.5 Inch 085 8.5 Inch 115 11.5 Inch 175 17.5 Inch 235 23.5 Inch

Specify sheath length in inchesExample: For a 6.0 inch L length specify 060For a 13.5 inch L length specify 135

L


200G

Code Sheath length L

Code Element configuration

Sheath length

Lead wire material/configuration(Teflon insulated cable std.)

Lead length (120 inches length std.)

316 SS sheathDo not bend in this area

2 inches

304 SS Transition fitting Lead wire termination

(Stripped and tinned std.)

Sheath diameter (1/4 Inch diameter std.)

Y L

D

Removable vinyl boot 100°C max.

200G Code Accuracy options



OPTIONS EXPLANATION 13

Burns Engineering has developed a flexible ordering system that enables you to choose exactly what you need foryour application. Basic Order Codes consist of standardized parts (items such as lead wire lengths and sheathdiameter). Each Ordering Information Page identifies the standard items on the drawing by the abbreviation “Std.”.Options allow you to customize your order in a precise and documented manner for future use.

Index of OptionsLead wire options (prefix letter L) . . . . . . . . .Page 14Sheath options (prefix letter S) . . . . . . . . . . .Page 16Connection heads . . . . . . . . . . . . . . . . . . . . . .Page 17Extension options (prefix letter E) . . . . . . . . .Page 18Thermowell options (prefix letter W) . . . . . .Page 19Transmitters . . . . . . . . . . . . . . . . . . . . . . . . . . .Page 21

How to Order Examples

ORDER AN RTD ASSEMBLY W/O OPTIONS (refer to pg 8 for ordering information)

200 C 10 A 1C 1A 045 TT3 03 / / options transmitter

(completed order code for a Type “C” RTD w/threaded thermowell and no options or transmitter)

ORDER AN RTD ASSEMBLY W/OPTIONS (refer to pg 8 for ordering information and pg 19 for well options)

200 C 10 A 1C 1A 045 TT3 03 / WT3

(completed order code for a Type “C” RTD w/threaded thermowell having an optional 3” lag extension)

ORDER A SPRING LOADED RTD ASSEMBLY W/TRANSMITTER (refer to pg 8 for ordering information)

200 K 10 A 5A 1A 045 TT3 03 / TL21[0 To 50]C

(completed order code for a Type “K” RTD w/threaded thermowell and optional transmitter)NOTE: When ordering RTD’s with optional transmitters:

Step #1 Select transmitter (see pg 21)Step #2 Select head to house transmitterStep #3 Select sensor type to mate with head step #4 Complete balance of order code

ORDER A REPLACEMENT RTD ONLY W/O THERMOWELL (refer to pg 7 for ordering information)

200 C 10 A N N 9 / /

sheath lgth(x) options transmitter(completed order code for a Type “C” RTD sensor)NOTE: Sheath length(x) can be determined by either of the following methods.

How To Order

#1 Sheath length(x) = OAL - 1.5Subtract 1.5 inches from the overall length (OAL) (see page 7 for OAL illustration)x = 10.5 - 1.5x = 9(10.5 is the measured overall length (OAL) of example #1 sensor)

#2 Sheath length (x) = N + AAdd the extension length (N) between thermowell and connection head to thermowell bore depth (A).

To determine bore depth (A) A = U + T + 1.5 for threaded wellsSince example #1 RTD had no options specified, the standard lengths for (N) and (T) would apply.N = 3 and T = 0 are standardA = 4.5 + 0 + 1.5 A = 6 inchesX = N + A X = 3 + 6 X = 9 inches

NOTE: Fill in all Basic Ordering Code Boxes. Fill in option code box only when it applies, otherwise leave blank.

#1

#2

#3

#4

TO ORDER CALL 800-328-3871 FAX 952-935-8782

14 LEAD WIRE CONFIGURATIONS(C - OPTION)

"Y"

"Y"

1.5

3.0

.5

"Y"

"Y"

3.0

3

"Y"

3.0

3

"Y"

3.0

Individual insulated lead wires (C01)

Cable (individual insulated lead wires with jacket overall) (C10)

Shielded cable (C20, C23)

Cable with stainless steel overbraid (C30)

Cable with stainless steel armor (C40, C41)

Cable with coated armor (C50, C51, C52, C53)

LEAD WIRE TERMINATIONS(T - OPTION)

Stripped and tinned (T01), standard

Stripped and tinned with spade lugs (T11)

Three prong plug (T20, T30)

Three prong plug with mating jack (T21, T31)

DIN plug (T40, T44, T50, T54)

DIN plug with mating jack (T41, T45, T51, T55)

Bannana plugs (T60)

Cable

Cable

Cable

Cable

15LEAD WIRE OPTIONS — ORDERING INFORMATION

Y_____

M2 Fiberglass insulation (500°C maximum leadwire service temperature and 200°C maximum epoxy transition seal temperature)

M3 Kapton insulation (260°C maximum service temperature)M99 Fiberglass insulation (500°C maximum leadwire service temperature and 500°C maximum

ceramic transition seal temperature)**

Specify lead wire length ‘Y’ in one inch increments

Example: For a 6 inch ‘Y’ length specify Y006. For a 10 foot ‘Y’ length specify Y120 (feet converted to inches)

L

Code Lead wire material (‘M’ option)

C01 Individual insulated lead wires (for type G RTD)C10 Cable (for type A, C, K or L RTD’s)C20 Shielded cable (stainless steel braid)C23 Shielded cable (Kapton™ foil shield with drain wire)C30 Cable with Stainless Steel overbraidC40 Cable with Stainless Steel armor*C41 Shielded cable with Stainless Steel armor*C50 Cable with PVC coated armor*C51 Cable with TEFLON encased Stainless Steel armor*C52 Shielded cable with PVC coated armor*C53 Shielded cable with TEFLON encapsulated Stainless Steel armor*

Code Lead wire configuration (‘C’ option)

A_____ Specify armor length in inches‘A’ length must be at least 6˝ less than lead wire length YExample: For a 110 inch armor ‘A’ length specify A 110.

T11 Stripped and tinned lead wires with #6 spade lugsT20 Three prong plugT21 Three prong plug with mating jackT40 DIN plug 5 pinT41 DIN plug with in-line mating jack 5 pinT44 DIN plug 7 pinT45 DIN plug with in-line mating jack 7pinT60 Banana plugs

Code Lead wire termination (‘T’ option)

Code Armor length ( ‘A’ option)

Armor (if specified)

3.0

Lead wire material 'M'

Lead wire termination 'T'

Shield (if specified)

Jacket (if specified)

Armor length

Lead wire length Y

'A'

Lead wire configuration 'C'

Note: Fill in only thecodes applicable toyour specifications

Lead wire options ordering information

L Code Lead wire length (‘Y’ option)

* Specify armor length code** Not suited for low temperature, high humidity applications.

Ceramic seal may not meet insulation resistance specifications on pg. 2

TO ORDER CALL 800-328-3871 FAX 952-935-8782

16

D2 3/16 Inch diameter

F2 4-10 Microinch Ra finish

Specify bend angle and bend location(distance from tip of sensor).

Bending angles should be specified tothe nearest degree. Accuracy of bendsare ±5°.

Bend locations should be specified in .1 inch increments and are defined asthe distance from the tip of the sensor.For example: to specify a bend locationof 6.2 inches from the tip, specify 062.

Example: for a 45° bend, starting 3 inches from the tip of the sensor,

specify B45030

B___ ___

Example:

For TEFLON sheath coating, specify SC2.

For sheath diameter 3/16 inch and 4-10 microinch Ra finish, specify SD2F2.

M12 Inconel 600 sheath

S

Code Sheath finish (“F” option)

C2 Teflon coating

Code Sheath coating (“C” option)

Code Bending options (“B” option)

Code Sheath material (“M” option)

SHEATH OPTIONS — ORDERING INFORMATION

Sheath finish(16-32 Microinch Ra finish std.)

Bending angle (0-90°)

Bend length (3 inch minimum)

R 1.0

Sheath coating(No coating std.)

Sheath material(316 Stainless Steel std.)

Start of bend

Do not bend within

2 inches from the tip

(1/4 inch diameter std.)Sheath diameter D


Sheath options ordering information

S Code Sheath diameter (“D” option)

17CONNECTION HEADS

TO ORDER CALL 800-328-3871 FAX 952-935-8782

3 1/4

1 1/8

2 1/16

3 1/4

1/2˝ NPT

3/4˝ NPT

3 1/4

1 1/8

2 1/16

3 1/4

1/2˝ NPT

3/4˝ NPT

3/4" NPT

1/2" NPT

1 1/2

4 1/8

5 1/2

3/4" NPT2

2

1/2" NPT

3 3/4

3 1/2

3/4" NPT 3/4" NPT

5 1/26 1/8

4 3/4

Viewport

#1 Connection HeadCast iron weather proof connection head, UL listed type.For use with single element, three wire dual element RTDsand DIN sized transmitters.

Ordering Codes:

1C for zinc chromate plated cast iron1E for epoxy coated cast iron

#2 Connection HeadCast aluminum weather proof connection head, UL listedtype. For use with single element, three wire dual elementRTDs and DIN sized transmitters.

Ordering Code: 2A Cast aluminum2E Epoxy coated aluminum

#5 Connection HeadExplosion proof cast aluminum connection head FM rated asexplosion proof Class I, Div 1, Goup A,B,C,D: Class II Div 1,Group E, F, G: Class III, Div 1, NEMA 4X. For use with singleand dual sensing elements, and Model TL transmitters.

Ordering Code: 5A Explosion proof cast aluminum5E Explosion proof cast aluminum epoxy coated

#9 Connection HeadPolypropylene weather proof connection head. For use withsingle element, three wire dual element RTDs and DIN sizedtransmitters.

Ordering Code: 9P

#10 Connection HeadExplosion proof cast aluminum connection head with glassviewport. FM rated for Class 1, Group B, C, D, Class II, GroupE F, G. For use with Model TLI indicating transmitters.

Ordering Code: 10A

#14S Connection HeadExplosion proof 316 Stainless Steel Connection head for usewith single element, three wire dual RTDs, thermocouplesand DIN sized transmitters. FM and CSA rated for explosion proof Class 1 Div I Groups B, C and D, dust ignition proof for Div II Groups E, F and G. NEMA 4X Indoor/Outdoor.

Ordering Code: 14S

EXTENSION OPTIONS

NippleExtension

1/2 inch*1/2 inch*

Overall Length

N length

Coupling-NippleExtension

1/2 inch*

Overall Length

N length

Nipple-Union-NippleExtension

1/2 inch*1/2 inch*

Overall Length

N length

Union-NippleExtension

1/2 inch*

Overall Length

N length

Specify extension length in one inch increments

N60 = N length of 6 inches

N__ __

Code Extension length ( N option)

E

*1/2 Inch is nominal thread engagement for 1/2 inch NPT fittings

E Extension options

EXTENSION OPTIONS ORDERING

INFORMATION

18

19THERMOWELL OPTIONS

R.F. flanged thermowell

• Shown with straight stem

(Type SF)

Socket weld thermowell

• Shown with reduced tip stem

(Type RW)

Threaded thermowell

• Shown with tapered stem

(Type TT)

Ø .625

.25Ø .260

Ø

"P" NPT

1/2 Inch NPT

1.75

+ 1.75T

T

A

Q

U

Lag Length

Bore DepthA=U+T+1.5

Immersion Length

Ø

Ø .260 Bore

Ø .50

Flange size & facing as required

.25

1.25

+ 2.25

2.25

A

Q

UT

T

Immersion Length

Lag Length

Bore DepthA=U+T+2

1/2 Inch NPT

2.5Ø

Ø .260

1/2 Inch NPT

P Ø .50

.25

1.75

+ 1.75

A

Q

U

T

T

Immersion Length

Lag Length

Bore DepthA=U+T+1.5

0.0 inches (standard)T30 3.0 inches

F2 Mirror (4-10 microinch RMS)Code Surface finish option F

E1 Hydrostatic pressure testE2 Dye penetrant testingE3 X-ray examinationE4 Material certificateE4 Murdock strength calculations

Code Testing options

C3 Tantalum jacket (for usew/type SF thermowell)

Code Coding Options

Z1 Brass plug w/chainZ2 SS plug w/chainZ3 Cleaned for

oxygen service

Code Misc. options

W Code Lag extension length T

Example: For brass plug w/chain specify WZ1

W

Thermowell Option-Ordering Information

TO ORDER CALL 800-328-3871 FAX 952-935-8782


Model TL Transmitter

20 TWO WIRE TEMPERATURE TRANSMITTER OPTIONFOR PLATINUM RTD INPUT

With .05% of span accuracy linearized with temperature, Burns Engineering transmittersdeliver twice the accuracy of most transmitters at about half the price of competitivemodels in this performance range. Both models feature:

• High accuracy: .05% of span

• Non-interactive wide range zero and span adjustment

• Outstanding ambient temperature range

• Low temperature coefficient

• State-of-the-art micro-circuit design

• Explosion-proof connection head (FM approved)

• EMI/RFI protected

Model TL features:• FM approved for intrinsic safety, Class 1, Division 1, Group A, B, C, D

Function: Two Wire Temperature Transmitters are signal conditioning devices that amplifythe RTD signal input and transmit this signal to a recorder, controller, etc...via two standardtwisted pair copper wires. The transmitter is usually installed in the connection head as anintegral part of the Burns package. The transmitter may also be mounted separately fromthe sensor on a nearby panel or “snap-track”.

Purpose: A head mounted transmitter greatly reduces the effects of electrical noise fromdegrading the RTD signal on its way to the control room or read out location. Some of thecommon causes of this accuracy degrading electrical noise are walkie-talkies, large electricmotors, a/c power lines etc....

Operation: By drawing current from a standard 24 VDC power supply (in proportion to theresistance signal from the temperature sensor), it converts the highly sensitive measurementsignal into simple process current. This current loop will transfer temperature information overa long distance, minimizing the problem of wire resistance or outside noise degrading accuracy.The power source and the signal share the same pair of wires.

Transmitter

+

RecorderController

DCS

RemoteReadoutLocation

Ground

Protective Ground:For model TL Transmitter, when used in hazardous locations.

4-20 mA+A

RemoteRTD Sensor

- OutputReceiving

Device

G-B

C- Power +Supply

Model TLI Transmitter w/Integral Display

IMPROVE PROCESS RESULTS WITH MATCHEDSENSOR/TRANSMITTER ASSEMBLIES

Ordering Information

Specifications for RTD Transmitters

TA RTD Transmitter, linearized, adjustable range, 0.1% accuracy DIN styleTL RTD Transmitter, linearized, 0.05% accuracy, FM approvedTLI RTD Transmitter, indicating, linearized, 0.05% accuracy, FM approvedTD RTD Transmitter, programmable, isolated, DIN style, CE markedTH RTD Transmitter, HART® programmable, DIN style, CE marked, FM approved

M Transmitter and sensor matched for improved performanceBlank Not matched

[Tmin To Tmax] Tmin = Temperature for 4mA outputTmax = Temperature for 20mA output

Code Temperature Range

C Degrees celsiusF Degrees Fahrenheit

Code Temperature units

Code Two Wire (loop powered) RTD transmitter with 4-20 mA output

21 100 Ohm, 3-wire, Platinum RTD, Alpha=0.00385Code Sensor Type

21

TO ORDER CALL 800-328-3871 FAX 952-935-8782

Specification Model TA Model TL Model TLI Model TD MODEL TH

Accuracy +/- 0.10% +/- 0.05% +/- 0.05% +/- 0.1% +/- 0.01 FRI +/-0.07% Rdg

Linearity +/- 0.10% Included above Included above Included above Included above

Temperature Range

Zero -50 to 50C -200 to 400C 0 to 400C -200 to 400C -200 to 400CSpan 50 to 550C 50 to 700C 50 to 500C 25 to 700C 25 to 700CAbsolute -50 to 500C -200 to 500C 0 to 500C -200 to 500C -200 to 500C

Drift Zero +/- 0.02% +/- 0.01% of span +/- 0.01% of span Zero 0.01%/C Zero 0.008C/C SpanSpan +/- 0.02% or +/- 0.01C per C or +/- 0.01C per C Span +/- 0.005%/C 100ppm/C

change in ambient temp change in ambient temp Long term 0.05%/yr

Adust Zero +/- 50C Zero +/- 25C Zero +/- 25C Programmable ProgrammableSpan +/- 50C Span +/- 25% of span Span +/- 25% of span via PC via PC, HART®

(rangeable -200 to 600C) (Tmax must ≥ 5xTmin)

Ambient Temp. -20 to 70 -40 to 85 0 to 50 -30 to 85 -40 to 85Range, C

Sens or Burnout Upscale Upscale Upscale Upscale UpscaleIndication

Supply Voltage 12V min 10V min 12V min 10V min 10V min36V max 40V max 20V max 40V max 40V max

Output Limits (High) 33mA (High) 33mA (High) 33mA (High) 20.2mA(Low) 3.2mA (Low) 3.2mA (Low) 3.2mA (Low) 3.8mA

EMI/RFI Immunity Input /output Input /output Input /output <1% (DC to 1GHz) Emissions EN50081-1 filtering filtering filtering Immunity EN50082-2

Power Supply Effect +/- 0.01% +/- 0.005% +/- 0.005% +/- 0.001%/V 0.2microA/V

Other Features DIN sized for Metal foil pots/snap Local indication/ Fully isolated/2 line Isolated/DIN sizedhead mounting track and remote metal foil pots tagging/CE/DIN sized for head mounting/

mounting/FM listed for head mounting CE/FM/HART

Code Calibration

Temperature Transmitters

Burns Engineering Inc.10201 Bren Road E.Minnetonka, MN 55343952-935-4400; FAX 952-935-8782www.burnsengineering.come-mail: [email protected]

©Copyright 1996 Printed in U.S.A.Burns Engineering Inc. Bulletin #966 Rev. 4/03

Sanitary RTDs

Custom RTDs & Thermocouples

Secondary SPRT Model 12001

series 200 - industrial controls temperature table 3 temperature coefficient = .00385 per iec 751 c...

Documents