Use Superior Aluminum Columns to addarchitectural interest to any home, apartment, or small commercial building.Period or Contemporary. Old or NewWorld look. There’s a Superior columndesign to meet a wide spectrum of needsand tastes.

The delicate beauty of Superior Aluminumcolumns belies their rugged strength.A standard (8’) 1-1/2” flat column, for example, can support up to 2,500 lbs.A 1-1/2” standard height corner column can support up to 6,500 lbs.! WithSuperior Aluminum Columns you get elegance and strength combined.

Twelve Attractive DesignsAll columns shown above are available in 1” SquareExtruded Tube by 8” wide overall and in 1-1/2” SquareExtruded Tube by 9” wide overall. The 352/353 and354/355 designs are also available in 1-1/2” SquareExtruded Tube by 12” wide overall and available with2” or 2-1/2” square tubing.

Standard columns are fabricated 8 ft. high with topand bottom brackets. Custom heights are available asrequired. All are available in baked enamel finishes inany of the nine colors that are offered for the railings.

Superior AluminumDecorative Columns forBeauty and Strength

To order, use numbersshown below.Even numbers (302, 304,etc.) are flat columns:odd numbers (303, 305,etc.) are for cornercolumns.

Residential Railings and ColumnsCustom Aluminum 600

SERIES

Flat (302)Corner (303)

NOTE: Designs (352, 353, 354, and 355, markedwith an asterisk), are shown as a 12” wide column.

304 / 305302 / 303 322 / 323 306 / 307 *354 / *355 *352 / *353 314 / 315 308 / 309 310 / 311 316 / 317 318 / 319

NOTE: No. 302 & 303 designs are shown in the1” Extruded Tube size by 8” wide, however, it isalso available in the standard 1-1/2” x 9” size.

Phone (937) 526-4065 Fax (937) 526-3904

E-mail address: info@superioraluminum.comOur Website: www.superioraluminum.com

AluminumProducts, Inc.

555 E. MAIN STREET, P.O. BOX 430, RUSSIA, OHIO 45363

Form No. 600-1G

Superior Series 900Railing with Series 600

Decorative Columns.

Select the railingdesigns and picket

pattern to suityour needs.

FinishesNine decorative finishesadd a distinctive touch toany building. Whetherbaked-on enamel oranodized, these finishesare guaranteed to endurefor years of continuedservice and maintenance-free beauty.

Superior Series 600 Custom AluminumRailings offer the most design features for the residential or lowrise, garden-type apartment market.High quality aluminum extrusions andcastings are used to provide maximumstrength and support.

The Series 600 streamlined designpresents an attractive appearance,while still maintaining the advantagesof aluminum—strong, durable, andrust-free. These characteristics makealuminum railings a practical, soundinvestment for any owner concernedabout overall cost.

Superior Series 600 Railings arecustom-made to your specifications,and are available in heights from 32”to 42”. This railing can be purchasedfactory assembled, or it can bepurchased K-D and assembled atthe jobsite.

SpecificationsMATERIALS - All rails, posts and pickets shall be formed from 6063-T6extruded aluminum alloys. All railing accessories shall be cast fromANSI 713 alloy. All exposed fasteners used in the system shall be aluminum or stainless steel.

INSTALLATION - The railing system shall consist of 1-1/2” squareposts that can be either base mounted or embedded into concrete.The top rail shall be a minimum 1-1/2” wide and the bottom rail a minimum of 1-3/8” wide. Pickets shall be 1/2” square on approximately6”, 4”, or 3” centers and shall run between the top and bottom rail. Therail shall be continuous lengths up to 16’. The railing system will adaptto step railing requirements by specifying a rectangular hole in the bottom rail.

SCOPE OF WORK - Superior Series 600 Railing shall be manufacturedand supplied by Superior Aluminum Products, Inc., 555 E. Main St.,Russia, Ohio 45363.

Satin Anodized White Almond

Sandstone Light Bronze Dark Bronze

Green Brown Black

Custom AluminumResidential Railings and Columns

600SERIES

TwistedPattern

Straight & Twisted Pattern

StraightPattern

EE

PP

PE

LXE

LXP

EXE

PXP

PXE

LXXE

LXXP

Straight RailsStep Rails

PES

PPS

LXES

LXPS

EXES

LXXES

PXPS

PXES

LXXPS

Hand RailSystem

Design Selections

Series 600 Railingwith Superior SquareSmooth Columns.

Series 600 Decorative Columns.

Series 600 Railing with Superior Square Panel Columns.

Series 600 Railingwith Superior SquarePanel Columns.

Series 600 Railing with Series 600 Decorative Columns.Series 600 Railing

Specify Superior Aluminum columns,inserts, and scrolls to add even moreversatility to the Series 600 Railing.

Consider the AdvantagesVersatility - Complete range of sizes,three picket patterns and a wide varietyof scrolls.

Durability - All aluminum construction,plus electrostatic painting or anodizing.

Easy Installation - Unique, no-welddesign, utilizing cast aluminum fittings.

Standard Railing - Available in 32”, 36”or 42” heights.

Step Rails - Furnished with swivelfittings - will adjust to any step angle.

Strong, Durable and Maintenance-Free Beauty!

AluminumRailing

Meets OSHA, ADA and ICC Safety Criteria

SERIES

Ask about our complete line of other...

Superior Aluminum Products:

MATERIALS - (For Series 900, 950, and 990)All rails, posts and pickets shall be formedfrom 6063-T6 extruded aluminum alloys. Allrailing accessories shall be cast from ANSI 713alloy. All exposed fasteners used in the systemshall be aluminum or stainless steel.

INSTALLATION - (For Series 900 and 950)The railing system shall consist of 2”or 2-1/2”square posts that can be either base mounted,side mounted or embedded into concrete. Thetop rail shall be 2”or 2-1/2” wide and the bottom rail a minimum of 1-5/8” wide. Picketsshall be 3/4” square on 4-1/2” or 6” centers,and shall run between the top and bottom rail.

SCOPE OF WORK - Aluminum railings as shownon drawings shall be Superior Series 900 Heavy-Duty Aluminum Railings, as manufactured andsupplied by Superior Aluminum Products, Inc.,Russia, Ohio 45363.

The top rail shall be continuous in lengths upto 24’. The railing system will adapt to step railing requirements by specifying a rectangularhole in bottom rail.

INSTALLATION - (For Series 990) The railingsystem shall consist of 2-1/2” square posts thatcan be either base mounted, side mounted orembedded into concrete. The top rail shall be2”or 2-1/2” wide and the bottom rail a mini-mum of 1-5/8” wide. Pickets shall be 1-1/2”x 3/4” on 5-1/4” or 6” centers, and shall runbetween the top and bottom rail. The top railshall be continuous in lengths up to 24’.The railing system can meet step railing

Phone (937) 526-4065 Fax (937) 526-3904

AluminumProducts, Inc.

555 E. MAIN STREET • P.O. BOX 430 • RUSSIA, OHIO 45363

Our Website: www.superioraluminum.com E-mail address: info@superioraluminum.com

• Round and All-Snap Fluted Aluminum Columns• Square Fluted, Panel and Smooth Aluminum Columns• Fiberglass Columns - Round & Square• Series 500 Non-Welded Aluminum Pipe Railing• Series 550 Non-Welded Aluminum Pipe Picket Railing• Series 600 Custom Residential Railing & Columns• Series 700 Aluminum Picket Fence & Custom Gates• Series 800 Quick-Lock Aluminum Pipe Rail• Spun Aluminum Flagpoles and Flags

Form No. 910C

Series 900 railing meets federal safety require-ments as determined by an independent testinglaboratory. Test results available upon request.Superior Series 900 railing is protected byU S Patent #3707276.

The balcony railing shown on roof top isSeries 990 with Superior panel column posts.The railing shown in foreground is Series 900.

Superior manufactures attractive gates withcustom locks upon request. Series 900Railing on brick retaining wall.

Ask about our extrudedX-Pattern System on thebalcony above, withSuperior panel columnposts.

Also available are cast aluminum X-inserts thatcan be mounted in Superior Series 900 Railing.

The balcony is supported bySuperior Fiberglass Columns.

requirements by specifying the riser and treaddimensions of the steps.

Superior Round Aluminum Columns

Superior Series 700 Aluminum Picket Fence & Custom Gates

Superior Non-WeldedPipe Picket Railing

901 Top Rail with Superior Aluminum Round Columns.

901 Top Rail with Superior Aluminum Square Smooth Columns.

901 Top Rail 2-1/2” W. x 1-5/8”H.18’& 24’ Lgths.

902 Top Rail 2” W. x 4” H. 18’ & 24’ Lgths.

903 Bottom Rail (Sq. Hole) 1-5/8” W. x 3/4” H., 16’ & 18’ Lgths.

904 Bottom Rail (Rect. Hole)1-5/8”W. x 3/4”H., 16’&18’Lgths

905 Top Rail - 2” W. x 1-5/8” H.18’ & 24’ Lgth.

909 Bottom Rail (1-1/2” W. Hole)16’ & 18’ Lgths.

RAILS

FASTENERS910 Picket Screws912 Rail Bracket Binder Bolt915 Post Brkt. Rivet 5/32”

9B ___ Picket 3/4” Sq.- 4-1/2”Centers9C ___ Picket 3/4” Sq.- 6” Centers9D ___ Picket 3/4” x 1-1/2” 90 ___ Wall Plate 91 ___ End Post 92 ___ Swivel Post 93 ___ Crossover Post 94 ___ Bottom Step Post 95 ___ Section Post 96 ___ Top Step Straight Post97 ___ Intermediate Step Post 98 ___ Corner Post 99 ___ Top Step Corner Post

POSTS & PICKETS

Specify Railing Height:32”, 36”, 42”, or 48”.

722 Base for 2” or 2-1/2” Post730 Cap for 4” Post906 17” Heart Scroll913 Internal splice for #905 Top Rail914 Post Ball Cap for 4” Post with

4” Diameter Ball916 2 1/2” Wedge Base /w Stud917 Wedge Base for 4” Post918 Wedge Base for 2” Post 919 2” Slip Over Base920 2-1/2” Slip Over Base921 3/4” Square Base922 3/4” x 1-1/2” Base929 Cast “X” Insert (4” Opening)933T 2-Way Swivel Bracket - 2”935 3-3/4” OD Double Ring936 Hanging Rail “L” Brackets937 3-3/4” Cast Diamond938 Angle Crossover Cap for 2” Step Post939T Adj. End Fitting (for 905)940 End Brkt. for Top & Bottom Rail

940B End Brkt. for #903 Bottom Rail 941 17”Cast “Fleur De-Lis” lnsert942 Cap for 2” Post943 Post Ball Cap for 4” Post with 2-1/2”

Diameter Ball946 Adj. End Brkt Top (for 902)947T Adj. End Fitting Top (for 901)947B Adj. End Fitting Bottom949 End Bracket for #902950 Cap for 2-1/2” Post951 Post Ball Cap for 2-1/2” Post952 Top Rail Hinge 2-1/2” W.953T 2-Way Swivel Bracket - 2-1/2”953B 2-Way Swivel Bottom954T Horiz Swivel Brkt. Top - 2-1/2”954B Horiz. Swivel Brkt. Bottom955 Vertical Swivel Top 2-1/2” W.956 Vertical Swivel Bottom957 Base for 2-1/2” Post (wedge type)958 Angle Ramp Plate959 Vertical Swivel Top 2” W.960 Crossover Cap for 2” Post961 Cap for 2” Post962 Top Rail Hinge 2” W.963 Top Rail Corner 2” W. 964 Top Rail Corner 2 1/2” W.965 Crossover Cap for 2 1/2” Post966 Crossover Cap for 2-1/2” Post (Flat)967 Crossover Cap for 1-1/ 2” Sq. Tube968 Base for 2” Post (Wedge Type)969T Horiz. Swivel Brkt. Top -2” W.970 Angle Crossover Cap for 2-1/2”Step Post971 Cap for 2-1/2” Post (Heavy Wall)972 Crossover Cap for 2-1/2” Post (Heavy Wall)973 Heavy Duty Base for 2-1/2” Post974 2-1/2” Sq. 42” - 3/16” w/#973 Welded On975 Side Mount Brkt. for 2-1/2”Post 976 Corner Side Mount Brkt for 2-1/2” Post977 Side Mount Bracket for 2” Post978L Wall Return - LH for #905 Top Rail978R Wall Return - RH for #905 Top Rail 979 End Cap for #905 Top Rail980 End Cap for #901 Top Rail981 End Cap for Bottom Rail982 End Cap for #902 Top Rail983 Lambs Tongue for #901 Top Rail984T Horizontal Swivel for #902985 Wall Brkt. for Handrail 3” 986 Lambs Tongue for #905 Top Rail988 90˚ Double Swivel for #905 Top Rail989 Post Ball Cap for 2” Post992 Post Finial for 2-1/2” Post993 Cast Rose Snap-on Picket Insert994 Cast Grape Snap-on Picket Insert995 Cast Oak Snap on Picket Insert997 Cast “X” Insert (6” Opening)998 Corner Side Mount Bracket for 2” Post

CAST FITTINGS

990 2-1/2” Sq.-16 ‘& l8’Lgths.996 2 1/2” Sq -18’ Length (3/16”Wall)377 2” Sq. - 16’ Length380 4” Sq. - 16’ Length

TUBING

906

941

993

994

995

à

901 Top Rail with the (Style B) System.In this application, the Bottom Rail is 902.

5

Parts Description

SERIES

Straight Rails900, 950or 990

722 916 920/919 921 922 940 940B 946

9B/9C 9D 90 91 92 93 94 95 96 97 98 99

947T/939T 947B 949 950/942 951/989 952/962 953T/933T 953B

954T/969T 954B 955/959 956 957/968 958 963/964

965 970 974 975 978L 978R

979/980 981 982 983/986 984T 985 992

902Top Rail

Step Rails 900,950 or 990

Hand Rail System

The well-crafted cleanlines of Superior Series900 railing fits almostany commercial or residential building application. It’s beauty,strength and durabilitywill compliment yourconstruction ideas.Well-crafted lines

902 Top Rail

901 Top Rail with the(Style B) system.

901 Top Rail

901 Top Rail used with Superior Aluminum Decorative Flat and Corner Columns.

901 Top Rail 4

1. #990 2-1/2” Tube .075” Wall2. 957 Base Assembly 3. 950 Cap4. 956 Bottom Rail Swivel Assem.5. 955 Top Rail Swivel Assem.

6. 940 Top & Bottom Rigid Attachment7. 901 Top Rail 2-1/2” W. x 1-5/8” H.

7A. 905 Top Rail 2” W. x 1-5/8” H.8. 903 Bottom Rail9. 904 Bottom Rail (A)

10. 3/4” Sq. Picket11. Crossover Post12. #912 8-32 Binder Bolt13. #910 Picket Screws14. #915 5/32” Dia. Rivets15. 902 Top Rail 2” W. x 4” H.

7A

905

901

901 905 902 903 904 909 990 377

901 or 905Top Rail

902Top Rail

902 Top Rail

902

900950990

Assembly Identification Design Selections Component Parts

Round Columns withStandard Caps

1. Slide standard cap over column neck until it rests against column shoulder bead.

3. Measure the required lengthor opening where the column isto be used. Column should beslightly longer for a snug fit.

4. Trim the bottom of thecolumn to achieve the desiredoverall height. Be sure towear Safety Glasses. Be cer-tain the saw-cut (top & bot-tom) is even so load is evenlydistributed around columncircumference. If necessaryuse a rasp to even it out.

8. Caulk between rim area of base and column witha quality paintable caulk. Clean columnsurface with a damp cloth. A highquality oil base primer is recommended,then apply a quality exterior paint.

NOTE: Generally the bottom sectionof the column is sawed off tofit the opening. Trim evenlyso the weight is evenlydistributed around thecolumn. However, depending upon your preference,maximum of 1-3/4” can be trimmedoff the top, if desired.

3. Next, lay column downand apply constructionadhesive to top andbottom load bearingsurfaces of column. See“Installation Note” below.

4. Install cap and baseand set column in place,then remove jacks or props.

5. With cap temporary pushedup, draw a pencil line aroundbottom surface of cap. Allowcap to slide down, then applyconstruction adhesive to top ofcap, (or upper mounting sur-face), and to upper neck of col-umn. Position the cap up andpress it firmly in place.

6. Draw a pencil line around the column at top of base, then slidebase up and apply constructionadhesive around column belowthe pencil line. Slide base downto its normal floor position.

8. Clean column surface with adamp cloth. A high quality oil base primer is recom-mended, then apply a quality exterior paint.

2. The column neck should protrude 1/16” above the cap.Trim evenly with an abrasive saw(if required). Be sure to wearSaftey Glasses

3. Apply construction adhesivearound lower round surface of cap,then position cap onto column.

5. Position base on column, thentemporarily stand column in positionand plumb with level. With cap andbase in proper position, mark exactmounting location with a pencil.

A. Using Construction Adhesive: One method ofsecuring column to structure is to apply construction

adhesive to top of column and on bottom trimmed

surface of column with column lying down.

2. Position cap and base ontocolumn and temporarily standcolumn in position, then plumbwith a level. With a pencil,mark the exact mounting posi-tion around the top neck of thecolumn and the base.

1. Measure the required length oropening where the column is to beused. Using an abrasive saw,column should be trimmed slightlylonger for a snug fit.Be sure to wear Safety Glasses.

Easy Assembly and Installation InstructionsRound Columns withOrnamental Caps

Trim offcolumn neck

Adhesive

555 E. MAIN ST. • P.O. BOX 430 • RUSSIA, OHIO 45363

FAX: 937-526-3904

Form No. FBC-12

Aluminum Products, Inc.

• Series 500 Non-Welded Aluminum Pipe Railing • Series 550 Aluminum Pipe Picket Railing• Series 600 Custom Residential Railing and Columns• Series 700 Aluminum Picket Fence and Custom Gates• Series 800 Quick-Lock Aluminum Pipe Rail• Series 900 Heavy Duty Aluminum Railing

• Spun Aluminum Flagpoles and Flags

• Round Fluted, Square Fluted and Panel Aluminum Columns • Square Smooth Columns

• Series 990 Heavy Duty Aluminum Railing• Series 950 Heavy Duty Aluminum Railing (ADA)

Superior Series 550 Aluminum Pipe Picket Railing

Ph. 937-526-4065

Superior Round Aluminum Columns

Our Website: www.superioraluminum.comE-mail address: info@superioraluminum.com

1/16"

Measure fromtop of cap.

Ask about our complete line of otherSuperior Aluminum Products:

7. Set column in its permanent position, then remove jack or props.

1. Trim off top ofcolumn neck toshoulder bead with anabrasive saw. Trim evenlyaround column circumference.Be sure to wear Safety Glasses.

4. Measure overal requiredlength measuring from top of capto bottom end of column. Trimfrom bottom end of column only.Be certain saw-cut is even so loadis distributed evenly around columncircumference. Be sure to wearSafety Glasses.

Square Columns withCap and Base

*Installation Note: (For Round Columns with Standard Caps, all Column Bases and Square Columns) The use ofL-Shaped Brackets or Construction Adhesive at top and bottom of column are several methods of fastening a column to the structure.The L-Shaped Brackets will be covered by the base. CHECK APPLICABLE STATE, LOCAL, AND FEDERAL BUILDING CODES FORSPECIFIC INSTALLATION AND FASTENING REQUIREMENTS APPLICABLE TO THE PROJECT.

7. Caulk with a quality paintablecaulk between base and columnand cap and column.

5. Position cap and base unto col-umn and temporarily stand column inposition, then plumb with a level.With a pencil, mark the exact mount-ing position around cap and base.

2. Measure required length or opening where columnis to be used. Column should beslightly longer for a snug fit.

6.* Next, lay column down and applyconstruction adhesive to top ofornamental cap and on bottom trimmedsurface of column. Another method ofsecuring column top in place isby drilling holes on opposite sidesat an angle thru the cap. Then,attach column to structure with screws.Do not over tighten.

B. Using “L” Brackets: Another method of attachingthe bottom of column to the structureis the use of L-shaped brackets at bot-tom of column. Tosecure column “L”brackets to column,drill holes through

column walls and use through bolts.Do not use screws.

6. Securing Column to structure*

7. Set column in place, then remove jacks or props.

“L” Brackets

8. Caulk between rim area of baseand column with a high quality paintablecaulk. Clean column surface with adamp cloth. A high quality oil baseprimer is recommended, then applya quality exterior paint.

Another method of attachingthe bottom of column to thestructure is the use of L-shapedbrackets attached to bottom ofcolumn. To secure column “L”brackets to column, drill holesthrough column walls and usethrough bolts. Do not use screws.

“L” Brackets

Installation Tip – Column may betrimmed with an abrasive saw, hacksaw,or fine-toothed handsaw. A rasp can beused to even it out

Superior fiberglass columns areshaped as they were in AncientGreece, stretching upward froma strong base to a graceful taperat the smooth top. Our fiberglasscolumns whether round, fluted,or square are specially construct-ed for all types of decorative andload-bearing installations andhave architecturally correctproportions and projections.The Greeks used the word“entasis” to describe theircolumns...you will call them“beautiful”. They are perfect forindoor and outdoor applicationsand ideal for both residentialand commercial use.

Whether it’s for new constructionor remodeling, beautiful Superiorfiberglass columns are thelow-cost way to add the touch ofelegance and more architecturaldetail to your architecturaldesigns and will last a lifetime.They’re manufactured from highdensity, highly advancedfiberglass polymers that resistimpact damage, and arevirtually maintenance-free.

Round Smooth,Round Fluted,and Square Smooth...

Fiberglass Columns

Strength - They can be used asload bearing structural elements inentrances, covered walkways, lob-bies, colonnades, balconies, andother structures, inside or outside.

Easy Installation - Cut thecolumns to size and slip on the capsand bases. Easy to follow assembly andinstallation instructions are on the backcover and packaged with each column.

Finish - For outdoor installations,the columns must be protected with a good quality exterior paint. An oil basedprimer is recommended. No special preparation is required, and once painted,the columns will not deteriorate, evenunder severe long-term weathering.

Complete Range of SizesRound smooth columns are available in6”, 8”,10”,12”,14”,16”,18”, 20”, 22”, 24”,30” and 36” diameters, sized to fit anyapplication. The round fluted columnsare available in 6”, 8”,10”,12”,14” and16” sizes. Square columns are providedin 6”, 8”, 10” and 12” size ranges.

Styling - Authentic round smoothor round fluted design is comple-mented by fiberglass matchingclassic caps and bases. TheStandard round cap, or ornamentalround Ionic, Scamozzi, Temple, andCorinthian caps above are availablefor the round smooth and roundfluted columns. The square columnat right is provided with a matchingsquare cap and base below.

Features

Durability - Unlike wood,fiberglass columns will not rot, split,or warp, and are more impactresistant than wood. And, of course,termites hate them.

Smooth Fluted

Round Columns

Dimensions & Load Data

Choose from any of 5 elegant round column cap stylesStandard Ionic Scamozzi Temple Corinthian

Standard Attic

Square Cap Square Base

SquareColumns

* Round columns should be trimmed only in non-tapered area of column to assure proper fit to base. Caps are viewed from top. Bases are viewed from bottom.

6” 6” 5-5/8” 5” 9-7/16” 16 7-1/2” 1-5/8” 7-1/2” 3-1/4” 8-1/2” 3-3/4” 8-3/4” 7-3/4” 9-3/4” 8” 8-1/2” 3-3/16” 8” 3-7/16” 8’ 8’ 8,000

10” 10” 9-5/8” 8-1/4” 12-3/4” 24 11-15/16” 3-1/8” 11” 5-1/4” 14-1/2” 5-1/4” 13-3/4” 11” 15-1/2” 12-1/4” 12-3/4” 5-1/2” 12-3/4” 5-7/8” 8’, 9’,10’,12’ 8’9’10’12’ 14,000

12” 12” 11-5/8” 9-11/16” 14-1/8” 24 14-3/8” 3-5/8” 12-3/4” 5-3/4” 17-1/2” 6-1/4” 15-3/4” 11-3/4” 18-1/4” 14-3/4” 15-1/8” 6-1/8” 15-5/16” 6-13/16” 8’, 9’,10’,12’ 8’9’10’12’ 18,000

14” 14” 13-5/8” 11-3/8” 18-1/4” 24 16-3/8” 4-1/16” 16-1/2” 5” 18-3/4” 5-5/8” 21-1/2” 14” 19-3/4” 15-1/8” 18-5/8” 7-1/2” 18-5/8” 9-1/16” 8’, 9’,10’,12’ 8’9’10’12’ 20,000

16” 16” 15-5/8” 13” N/A N/A 18-1/2” 4-1/2” 17-1/4” 6-3/8” 22” 7-1/2” 23-1/4” 17” 22-1/2” 17-1/8” 21-3/8” 8-5/8” 21-1/8” 10-3/16” 8’, 9’,10’,12’ 8’9’10’12’ 20,000

18” N/A 17-1/2” 15” N/A N/A 21-1/4” 5-1/2” 21-1/4” 6-1/2” 24-3/4” 7-1/2” 27” 18-5/8” 25-1/4” 17-3/4” 24-1/8” 9-13/16” 24-1/4” 11-5/8” 8’, 9’,10’,12’ N/A 20,000

20” N/A 20” 17” N/A N/A 24-1/8” 5-15/16” 25” 9” 28-1/2” 8-1/2” 27-3/4” 21-1/2” 39” 25-1/4” 27” 10-3/4” 27” 12-7/8” 12’,14’,16’,18’ N/A 20,000

22” N/A 22” 18-1/2” N/A N/A 26-1/2” 6-1/4” 25-1/8” 9-1/2” NA NA NA NA 41” 28-1/2” 29-3/4” 12-1/8” 29-3/4” 14-1/4” 14’,16’,18’,20’ N/A 20,000

24” N/A 24” 20” N/A N/A 28-3/4” 6-7/8” 27-3/4” 9-3/4” 32-1/4” 10-5/8” 35-3/4” 23” 42” 28-1/2” 32-1/2” 13-1/4” 32-1/2” 15-11/16” 14’,16’,18’,20’ N/A 20,000

30” N/A 30” 25” N/A N/A 35-3/4” 8-5/8” NA NA NA NA NA NA 48” 36” 40-1/2” 16-1/2” 40-1/2” 19-1/4” 20’,22’,24’,26’ N/A 20,000

36” N/A 36” 30” N/A N/A 42-3/4” 10-1/2” NA NA NA NA NA NA NA NA 48-3/4” 20-1/8” 48-3/4” 23-1/2” 20’,22’,24’,26’ N/A 20,000

1/3 of length

1/3 of length

1/3 of length

1/3 of length

1/3 of length

1/3 of length

1/3 of length

1/3 of length

1/3 of length

1/3 of length

1/3 of length

14’, 16’

14’, 16’

14’, 16’, 18’ 20’

14’, 16’, 18’ 20’

20’, 22’, 24’

22’, 24’

22’, 24’

28’, 30’

28’, 30’1/3 of length

6” 5-1/2” 8” 1-15/16” 8-1/2” 3-1/4” 9’ 5,000

8” 7-1/2” 10-1/8” 2-3/8” 10-3/8” 4-1/4” 8’, 9’, 10’ 10,000

10” 9-1/2” 12-3/4” 3” 13” 5-1/4” 8’, 9’, 10’ 10,000

12” 11-1/2” 15-7/8” 3-3/8” 15-1/4” 6” 8’, 9’, 10’, 12’ 10,000

8” 8” 7-5/8” 6-1/2” 10-5/8” 24 9-1/2” 2-1/2” 8-1/2” 4” 10-1/2” 4-1/4” 10-1/4” 8-1/4” 12-3/4” 9-1/4” 10-1/4” 4-3/8” 10-1/4” 4-1/2” 5’, 6’, 8’, 9’, 10’ 8’, 9’, 10, 10,000

2 3

... and 2 round bases.