service & repair - donutsdocshare04.docshare.tips/files/3595/35951240.pdf2 sioux chief...

Service & RepairService & RepairProducts

Innovative products from a manufacturer based in the United States of America.

Friendly customer service with 24-hour order turnaround. Next day air also available.

Centrally located in the United States for quick shipping with a 99% fill rate.

Sioux Chief Manufacturing tel: 1-800-821-39442

Wax Gaskets Tank Bolt Set

Tank Bowl KitsWaxless Gasket

Plastic Flush Valve

Flappers

Plastic flange extends • discharge opening

Fits 3" and 4" • waste lines

Meets Fed spec • TT-P-1536A

Cloth inserted washers•

7• ∕8" truss head with deep slot

Solid brass construction•

Sponge gasket with • solid brass tank-to-bowl bolts

Sponge rubber – ring • type or wide flange

Bowl setting • alternative to wax

Complete replacement • plastic flush valve with flapper

White body with • clear vinyl chemical resistant flapper

Includes 23-link • stainless steel chain

Smart Cap™

Closet Bolt Cover CapPatent pending

Base is installed between the bowl and nut.

Taller cap eliminates • the need to cut brass bolts

Base creates a tight • seal that helps provide a continuous sanitary seal between base and china

402-10

490-10500

490-10540ring type

490-10545wide flange

490-10555

442-2W

490-11150

490-10108

490-10115

490-10120

Replacement toilet • bowl flappers for Eljer, Kohler, American Standard and others

fax: 1-800-758-5950 www.siouxchief.com 3

Tensile strength • exceeds 1,100 lbs. per bolt

Corrosion proof•

Improved • adaptability—open end nut now fits ½" sockets, and fits under most bolt caps. Bolt base loads into any flange

Tank Handles Anti-Siphon Ballcock

Poly Tank Float Ball Closet Flange Floor Support

10" anti-siphon ballcock•

Coupling and locknut•

Synthetic washer • and vinyl refill tube

8" brass float rod•

High buoyancy • polyethylene float ball ¼" × 20 female thread

Repairs and replaces • rotted-out flooring around closet flanges

Heavy gauge, zinc • plated steel die-cut plates

Pre-slotted and • furnished with mounting screws

Wedge-It™

Multi-Purpose Stability Wedge

Stiff polypropylene • is drivable

Soft rubber-like PVC is • easy to trim and resists slipping on tile floors

Dozens of uses on • the job site, in the office, home, etc.

Corrosion proof•

Plumb Perfect™

Closet BoltPatent Nos: 217,458t; 249,227; 255,647

425421 427

460-10

490-10451

490-11322

490-10465

490-11159

490-11100

Metal replacement • tank handles for Kohler, Eljer, Mansfield, American Standard and others.

Save-A-Flange™

Closet Flange Repair Kit

490-11321

Renews broken • closet flanges

• 1 ∕8" stamped, zinc plated steel

3½"

2½"2"

¼"

115 ⁄16"


Long Branch™

Dishwasher Tailpiece

6"–12" lengths with • direct connect, fine thread and slip-joint connections

Downward inlet • eliminates splash-up

No connector • kits needed

Outlet WasteDirect Connect & Universal

Lavatory Drain

Brass DWV ConnectorDeSanko Fitting

DWV Slip Joint AdapterBrass Marvel Thread

Dishwasher Air Gap

1½" tube × • 1½" MIP/FIP

Solid brass body • and nut

Comes standard • with brass nut and grid strainer

1¼" × 6" 17-gauge • brass tailpiece

1¼", 1½", and 2" • female sweat × slip joint thread

Sweat on to copper • DWV pipe to make slip joint connections

Inlet ½" hose barb; • outlet ¾" hose barb

Molded polypropylene • body, full 3 ∕8" passageway

Spitting action • eliminated with design of inlet tube and inner cap249

274-7270-6

272-6

290-20514258-160253-550

200-064

Dishwasher Drain Connector Kit Dishwasher Drain Hose

EPDM dishwasher • drain hose has double-ply, polyester spiral reinforcement to make it durable and kink resistant

902

905

No-Putty Gasket™

290-203204¼" O.D.

290-203222" O.D.

290-203242¾" O.D.

Replaces plumbers • putty, won’t dry out, stain or smudge, no mess

Fits all standard • drain attachments

Stands up to the • toughest commercial cleaners


Snap One™

Floor and Ceiling PlateCorrosion proof •

CTS sizes: ½"–1" • IPS sizes: ½"–3"

Available in white or • chrome plated ABS

Split for pre-piped jobs•

Trim Tite™

Escutcheon

Stainless Steel Supply Connectorsfor Lavatory or Closet

¼-Turn StopsAngle, Straight, and Dual Outlet

Faucet Aerator

Kitchen Hose Spray Kit and Accessories

Corrosion proof•

CTS sizes: • 3 ∕8"–1" IPS sizes: 3 ∕8"–2" Deep tubular: 1¼"–1½"

Low cost and attractive • appliance white color, an excellent substitute for chrome-plated or stainless steel escutcheons

Lavatory lengths: • 12", 16", 20", 30" Closet lengths: 9", 12", 20"

304 stainless steel • braided outer material

Flexible for ease • of installation

Connectors crimped • on for positive seal

Chrome plated brass•

2.0 GPM maximum•

½" sweat, PEX, • CPVC, FIP, & 5∕8" × 3∕8" compression

Chrome plated brass•

¼-turn positive • on and off

Oval handle for • ease of operation

UPC/IAPMO listed•

Universal coupling • connection: 1/8" MIP with 1/8" FIP × ¼" FIP

Accessories available • in black or white

Dry Seal Pipe Collar™

Water/Moisture BarrierPatent # 7,197,777

928-2

CTS sizes: ½"–1" • IPS sizes: ½"–¾"

Also a ½" shower • arm size

Helps keep moisture • out of wall cavity which helps eliminate MOLD growth

922-6W

920-2W

926-2

926-2W

109-310

109-S21110-FA21

242-10

281-12 284-12290-21100

P-Traps

1¼" and 1½" sizes •

Tubular polypropylene•

Wing nuts for easy • installation

234-10


Shower Arms and Accessories

Shower WallNut™

Shower Arm Adapter

Rear View

Optional sealant groove Shower WallNutLock ringCompression ferrulePrimary sealing component½" nom Type L copperBuna-N o-ringProvides backup sealBrass shower armEscutcheon clips

Stub out with copper tube, just like other fixtures•

Stub out to shower arm connection is made • outside the finished wall. No hidden leaks in the wall which promote mold growth

Do• NOT use pipe seal tape or pipe joint compound on shower arm threads

Tub Spout Escutcheon

For use with ½" • CTS, ½" or ¾" IPS

Chrome plated brass • with foam gasket

Covers unsightly • stain marks

chrome

oil-rubbed bronze

polished brass

satin nickel

pearl nickel

white enamel

Retro-fit kit (616-02C8L) for replacing loose, wobbly shower arms (where a drop-ear elbow is used).

616-02

972-100

8"

6"

4"

Tug Spout™

Tub SpoutPatent #7373674

Installs directly onto ½" copper stub • out with only #2 Phillips screwdriver

Slip-fit convenience•

Caulk around Dry Seal Pipe • Collar, not around the Tug Spout

Tugging mechanism tightens • spout securely to wall

972-32RB 972-36SN972-32

974-60300

974-6031510" rise

974-60304

974-60310

Includes Dry Seal Pipe CollarKeeps moisture from wall cavity to help eliminate mold

WagnerCS

Discontinued


JackRabbit™

Jacking Bolt Shower Drain

Perfect for replacement applications • when workspace is restricted by building members and existing pipe

Unique design uses stainless steel • “jacking bolts” and a pressure plate washer to create a seal—no need to wrench tighten the outer locknut

Brass body, locknut and • pressure plate washer with elastomer no-caulk gasket

Shower DrainsSolvent Weld Module Drain No-Caulk Module Drain Solvent Weld Pan Drain

Replacement Strainersfor Drains

827-2J

825-20P821-200PNR 821-200PNQ

827-2B

828-2

Stainless Steel PVD Polished Brass

Oil-Rubbed Bronze

Satin CopperSatin Nickel Antique Brass White EnamelPearl Nickel


846-59PK 868-5P

869-4P

Urinal Flange Kit

2" hub, spigot or inside • fit connections available

Kit includes: stainless • steel bolts, nuts, washers, and gaskets

New inside fit • connection allows pipe to be cut flush with finished wall

Cast Iron StrainerGeneral Purpose

Smart Saddle™

DWV Saddle Tee Fitting

Backup Float Valve Backwater Device

DWV Backwater Valve PVC or ABS Solvent Weld Connection

Inside Pipe Drain

845-4PS

845-4P

Sizes: 4• 3 ∕8", 5", 6", 6¼", 6½", 65∕8", 67∕8", 7", 8", and 87∕8"

Cast iron strainers • are ¼" thick and epoxy coated for corrosion resistance

PVC and ABS in • hub sizes 2"–6"

Extension sleeve • also available

CSA certified (B181.1 • and B181.2); UPC/IAPMO listed

Valve: 2", 3", 4" sizes•

Device: 2" MIP Body•

PVC and ABS: 2"–4"•

Solvent welds inside • pipe, flush to floor

Great for direct vent • furnaces and water heaters, or to cover any open ended pipe

3" and 4" trunk • sizes with 1½"–4" hub inlets

Stainless steel bands • provide torque, eliminating points that damage pipe and create a poor seal

847-7

Replace-It™ Adjustable Drain Strainer

Patent # 4,871,451

Gripper®

Stainless Steel Pipe Strainer

Replace rusted or • broken cast iron strainers or bar grates

Heavy gauge • stainless steel

7¼" diameter fits • 3¼"–6¾" openings; 9¼" diameter fits 5¼"–8¾" openings

2"–4" sizes •

Gripping fingers fit • snugly inside pipe keeping strainer securely in place

Heavy gauge • stainless steel—100% corrosion proof

803-2PK2

891-0312P

847-3

802-7


TKO™

Total Knockout Closet FlangePatent #5,377,361

886-4PT

884-PTM

Push-Tite™

Gasketed Closet Flange

887-GPTM

888-GPM

PVC and ABS, • 3" spigot, 3" hub, 3" Sch. 30 hub, 4" spigot, 4" hub

Over ten years of • proven performance

Knockout will not • break apart and cannot fall down drain pipe

Strong, corrosion-• resistant stainless steel ring eliminates cracked flanges

Easier installation, no • need to hold knockout while hammering

Holds five floors (22 • PSI) for head test

PVC and ABS, 3" • and 4" inside fit

Gasket seals inside • DWV pipe

Engineered elastomer • gasket is chemical and heat resistant

Full Flush™

Offset Closet Flange

Full-flow, 3" I.D. throat•

Also available in • a TKO version

Allows for 1 ½" offset • in any direction for closet bowl setting

Solvent welds over 3" • or inside 4" Sch. 40 PVC or ABS DWV

Drop-Kick™

45° Offset Closet Flange

Full-flow, 3" I.D. • throat—no restriction

Solvent welds inside • 3" Sch. 40 PVC or ABS fitting hub

Corrosion-resistant • stainless steel swivel ring is engineered for maximum strength

Brass Closet Flange Ring

890-4BPK

890-4BDPK

Solid brass•

For use with lead pipe•

Deep seal model • provides more surface area for better joint

Ringer™

Stainless Steel Closet Ring

Stainless steel ring is • corrosion resistant

Perfect for repairs • to damaged closet flanges, or new concrete floor installations

Fits securely over • damaged flanges

Raise-A-Ring™

Closet Flange Extension Ring

Can be stacked • if needed

Build up existing flange • when added subfloor, tile, etc. leaves flange at or below floor level

886-R is • 7∕16" thick

886-RQ is ¼" thick•

889-POM

889-45PM

886-MR

886-R

886-RQ


Finish Line™

Adjustable Floor Drain

Available with • 2"–4" connections

Adjustable before and • AFTER the pour

ABS/PVC or ductile • Base Adapter, ABS or ductile Coring Sleeve and Head Adapter. Poly Coring Plug

Nickel-bronze strainers•

Finish Line™

Adjustable Cleanout

Available with • 2"–4" connections

Adjustable before and • AFTER the pour up to ¼"

ABS/PVC or ductile Base • Adapter, ABS or ductile Coring Sleeve and Head Adapter. Poly Coring Plug

Nickel-bronze or • Tenzalloy covers

Cleanout Cover Kit20 Gauge Stainless Steel

Available with 9" wall • bar or countersunk brass plug

Plugs available in • 4", 5" and 6"

Covers available • in 3"–8"

Slotted Polypro Flush Plug

Sizes: 1½", 2", 2½", 3", • 3½", 4", 5", and 6"

With or without • threaded brass insert

Acid-resistant and • chemically inert

Glass-filled • polypropylene will not seize on ABS, PVC or cast iron

832-36ANR

832-4PNQ

834-4PNQ

834-3ANR

873-240878-15

Cleanout Bushing

PVC and ABS, 2" to • 4" Sch. 40 inside fit

Plugs have threaded • brass inserts

Cleanout bushing kits • includes: bushing, 16-gauge stainless steel cleanout cover, ¾" stainless steel bolt

875-8230P875-2P

Adjust after the pour with the Finish Line.

832-S4


Hydra-Rester®

Commercial Water Hammer Arrester

Vacu-Rester™ Vacuum Breaker Arrester

A–F unit sizes with • ½" –1" connection sizes

Certified by the • American Society of Sanitary Engineering to the ANSI/ASSE 1010-2004 Standard

Lifetime cycle tested • to withstand 10,000 shock cycles

½"–1" connection sizes •

To prevent cavitation • and accompanying water hammer within the extra-long tub spout tubes and/or shower risers of high-flow fixtures, such as garden tub valves and multi-head shower valves

Prime Perfect™

Trap Primer Valve

Automatically activates • to replenish evaporated water in floor drain traps to prevent the escape of sewer gases

Large port openings • in debris screen prevent clogging from sediment and debris

Water release is • factory set. No field adjustment necessary

Single trap primer • can service up to eight traps using splitter and distributors

Certified by the • American Society of Sanitary Engineering to the ASSE 1018-2001 Standard

Cold water supply lineTrap primerVacuum breaker

Gravity line to trapFloor drain

Trap

Mini-Rester™

Residential Water Hammer Arrester

All Mini-Resters are approved for sealed wall • installations with no access panel required

Certified by ASSE as AA size to the • ANSI/ASSE 1010-2004 Standard

May be installed at any angle•

Permanent, pressurized air-cushion

Piston moves and compresses air cushion

Pressure spike generated by valve closure

Water flowQuick closing valve

Piston at rest

660-SB½" male sweat

660-V82B½" male CPVC

660-H¾" hose thread

660-2½" MIP thread

660-TKB 660-TRB

660-TB⅝" compression tee

660-TRB⅝" O.D. compression

× ⅝" O.D. female compression

660-TKBfemale × male ballcock thread

653-BS

652-AD

695-01

653-B


TouchDown™ Universal Pipe Clamp

Patent # 6,126,122

TouchDown II™ Large Universal Pipe Clamp

Patent # 6,126,122

Totem™

Offset CTS Hanger

Hangs Tuff™ Pipe Hanger

Patent # 5,385,320 Canadian Patent # 2,125,249

ZipStick™ Universal Pipe Hanger

Clamps ¼" – 1" CTS pipe (copper, PEX, CPVC, • PB) and 1 ∕8" – 1" Sch. 40 pipe (steel or plastic)

Releasable locking mechanism•

Variable clamping tension allows for • expansion and contraction of tube

Provides ¼" stand-off•

Clamps ½" – 2" CTS • CTS pipe (copper, PEX, CPVC, PB) and 3 ∕8" – 2" Sch. 40 pipe (steel or plastic)

Releasable locking • mechanism

½" and ¾" CTS sizes •

1" offset from mounting • surface to bottom of tube (copper, PEX, CPVC, PB)

Locking finger holds • pipe securely in place

1½"–4" DWV•

Also available in • ½"–1¼" CTS

Strong and rigid • I-beam design keeps pipe secure

Impact resistant ABS•

Cradle hangs any pipe • from 1" CTS to 6" IPS

White or black, with • 10", 14" or 26" stems

Pick-Up Talon™

Isolating Drive HookPatent #7,207,530

556-3C

556-3S

½" to 1" CTS sizes •

The most affordable • solution to keeping tube (copper, PEX, CPVC, PB) off the mounting surface

Install in alternating • directions to ensure secure piping

550-11

550-20

553-9W553-014W

552-A2

552-B22

552-B33

550-2T

TouchDown II™ Strut ClampLarge Universal Pipe Clamp for Strut

No tools required • for fast and easy installation

One clamp fits ½" • CTS–2" IPS


Strong Arm™

Bracketing System with

Lock Block™

CTS Tube ClampPatent Pending

Power Bar™

Universal Slider BracketPatent Nos. 6,446,915 and 6,402,096

Grid Iron™

Universal Bracketing SystemPatent # 5,876,000

½" to 1" CTS Lock • Blocks are pre-assembled on each pair of brackets

Rigidly secures copper • stub out and prevents all movement

Position stub outs at • any desired location within the stud bay

Available for 16" • and 24" stud bays

Lock Blocks compress • on tube and brackets once screws are tightened down

Use with ½"–1" • CTS pipe (copper, PEX, CPVC)

Galvanized steel • bracket and tough plastic clamp is strong and supports pipe without bowing

Available with one, two, • or three TouchDown clamps pre-loaded to reduce installation time

Smaller bracket • expands to fit openings from 9" to 16"

Larger bracket • expands to fit openings from 14" to 26"

Fits inside 2 × 4 • wall when strapped to 2" pipe

1" on-center grooves • in bracket

Ideal for island sinks•

Great pipe organizer • for slab jobs

525-1622

523-2424

571-145

Copper Star™

Locking Tube Nut

½"–1" CTS sizes •

20 gauge pure • copper, 2" O.D.

Slides over and locks • copper tube into place

Secures copper tube • when penetrating walls and floors

612-2

Suspensulator™ Tube Suspension Clamp & Insulator

½" to 1" CTS•

Designed to work in • both 13∕8" or 111∕32" holes in wood or metal studs

Split design allows for • use after piping is run

Corrosion proof•

558-E2


Frost-Proof Anti-Siphon Sillcock¼-Turn Valve

Longer stem keeps • knuckles from scraping on hose threads

Thicker, easier-• turning metal handle

Nickel-plated • brass body

Full-slip sweat and • compression models for easy replacement

CPVC Frost-Proof Sillcock¼"-Turn Valve

Longer stem keeps • knuckles from scraping on hose threads

8" and 10" lengths • available

Thicker, easier turning • metal handle

Nickel-plated • brass body

Elbow Adapter

Straight Adapter

645WC3CPVC × F1960 PEX cold expansionSizes: ½"–1"

646X2MIP × F1807 PEX crimpSizes: ⅜"–1" PEX × ½"–1" MIP

637-X721⅜" OD compression × F1807 PEX crimpSizes: ⅜"–½" PEX

643C211male sweat × CPVCSizes: ½"–2"

643-P722male sweat × PVCSizes: ¾"–2"

646-P3MIP × PVCSizes: ¾"–2"

647-P3FIP × PVCSizes: ¾"–2"

645 XC2CPVC × F1807 PEX crimpSizes: ½"–1"

647-X3FIP × F1807 PEX crimpSizes: ½"–1"

643X2male sweat × F1807 PEX crimpSizes: ⅜"–1"

637C20FIP swivel × CPVCSizes: ½"–1"

646-C2MIP × CPVCSizes: ½"–2"

647-C2FIP × CPVCSizes: ½"–2"

119-208Lengths: 4"–10"

119-210PK Length: 10"

Plus 6" full slip

119-210CPKLength: 10"

Plus 2" full slip

119-C210

632X222Male sweat × F1807 PEX crimpSizes: ⅜"–¾"

632X222MMIP × F1807 PEX crimpSizes: ⅜"–¾"

632X217⅜" OD compression × F1807 PEX crimpSizes: ½" PEX × ⅜" O.D. compression

637X235FIP swivel × F1807 PEX crimpSizes: ½", ¾" PEX × ¾" FIP swivel

PEX (F1807, F2080)•

CPVC•

PVC•

Sweat•


Tankless Water Heater Connector KitSweat & FIP Connections

¾" full port ball valves•

Integrated all brass • tee for pressure valve

¼-turn drain valves • for drainage/flushing

Pressure valve • and installation instructions included

690-0101

Replace-A-Valve™

Full-Port Ball Valve Sweat or Compression Connection

600-204CV

600-204V

Full-Slip Repair CouplingsSweat or Compression Connection

600-206Lengths: 3", 6", 12"

600-206CLengths: 6", 12"

Add-A-Line™

Full-Slip Valve Tee

601-20CV

601-22CVM

601-22VX

½" and ¾" full-• slip tailpieces for easy installation

Sweat or compression • models

Full port ball valves•

½" and ¾" full-slip • copper repair couplings

Safe for repair of cold • and hot water lines

Sweat and • compression models

Valved tees come • in ¼" and 3 ∕8" oD compression, ½" female sweat × MIP and ½" F1807 PEX crimp

New one-piece forged • brass compression and sweat tee body5• ∕8" or 7 ∕8" O.D. compression trunks provide easy and totally torchless installations

½" or ¾" full-slip • sweat trunks

Perfect for adding • humidifiers, dishwashers, ice makers, or any new water line easily

Quality brass ball • valve replaces cheap saddle valves that leak and clog

601-30CVPK

Full-Slip Male AdapterBrass Female Sweat × MIP Thread

With compression • model, use wherever ½" MIP threads must be replaced without soldering

¾" and 1" sizes are • ideal for closet or urinal stub out adapters

Full-slip fitting slides • completely over ½" CTS

614-2

614-22C⅝" compression × ½" MIP

6¼"

9⅜"


Water Heater ConnectorIndividual or by Kit

A• Hot Side Connector

B• Cold Side Connector

C• Dielectric Nipple Option

D• Expansion Tank Option

DAB

C C

All Sioux Chief water heater connectors • are available with ¾" and 1" MIP or FIP swivel connection

Full-slip sweat or • 7∕8" O.D. compression connections offer options for copper systems

Easy installations with flexible • corrugated connectors and ¾" type-L copper in both straight or elbow

All connectors are available in a variety • of lengths to meet CPVC and PEX manufacturer installation instructions, IPC and UPC model codes and Plastic Pipe and Fitting Association guidelines for electric and gas water heater installations

Cold side connectors have 600 • WOG full port ball valve

Water heater connectors with a ¾" FIP branch • for a two gallon expansion tank are available

633-312

633-312

633-3TM15633-312FP631-XSHot PEX offset

Hot full-slip male sweat

Cold CPVC with expansion arm

Cold CPVC Cold full-slip male sweat

Cold MIP with expansion arm

Cold CPVC flexible

Cold PEX flexible

Cold CPVC elbow

634-X418FP 631C307FP633C18B 634C118FP633-C18FPT

full-

slip

slid

e do

wn

& ti

ghte

n


Ox Box™ Washing Machine Outlet Box

Patent Pending

Available with Mini-Rester • water hammer arresters

Boxes mount securely to stud•

Separates supply and drainage • systems into two stud bays

Separate boxes offer flexible layout•

Durable ABS stands up to job site abuse•

Drain knockout is easy to • remove with pliers

Debris covers included to protect • boxes from drywall mud and paint

High-quality quarter-turn ball valves•

¾" male hose-thread outlet connections•

696-2313MF

Access PanelOne and Two Piece

Provides economical access to pressure and • drainage plumbing, pipes, and wiring

Surface allows for painting and wallpapering•

1• ∕8" thick

Four countersunk holes•

970-2087½" × 7½"17" × 17"

970-11212" × 12" 17" × 17"

Ox Box™ Patent Pending

696-1010MF 696-2001MF 696-1011MF

Toilet/Dishwasher Outlet BoxLavatory Outlet BoxIce Maker Outlet Box


Mini HacksawPistol Grip & Standard

Inside Pipe Cutter

Steel blade for • plastic pipe

Abrasive disc for • plastic or steel pipe

Wire Cable Saw

Cuts PVC pipe in • tight spaces

Disposable, good for • approx. 40 cuts

Plastic Tube Cutter

FlangeBuster®

Closet Flange Remover

Removes 4" inside • mounted plastic closet flanges without damaging the surrounding floor or existing pipe

Connects to any • common power drill

Separate screw sets • the 6" blade tension

Good for fine work • in small areas. Six inch steel blade cuts copper & brass tube, bolts, steel, wood, and plaster

Quickly cut PEX, • PVC, CPVC, and other poly pipe or non-metallic hose

For 1 • 1 ∕8" O.D. tube or smaller

301-062390-50163

390-50153

390-50105304-08

304-60

Sawhorse™

Multi-Purpose SawHigh-quality, hardened-steel blade remains • sharp through thousands of cuts

Perfect for plastic pipe, wood, and • many other materials

12" model has 13 teeth/inch for fine cutting. Teeth • are on the nose for notching in tight areas and starting cuts in the middle of floor or wall

20" model has 10 teeth/inch for faster cutting•

Both include plastic teeth protector•

300-12

300-20

304-25

304-30

Tube Cutters


306-10313-08

Offset Ratchet Box Wrench

25° offset angle•

Reach tight situations • without scraping your knuckles

Speed and convenience • of ratcheting box wrench

Reverse by • flipping lever

316-2⅜" × 7⁄16"½" × 9 ⁄16"

P.O. Plug WrenchTelescopic Basin Wrench

Faucet Seat Wrench

Fitting BrushesAcid Brush

Tube O.D. Brush

Faucet Nut Wrench

Slip Joint PliersMini Angle-Nose Pliers

Abrasive Mesh

Socket Wrench Set

Heavy Duty Pipe Wrench

Jaw capacity: • 3 ∕8"–11∕8"

Nickel plated finish • for long life

6" long leverage bar•

Length adjusts to 9½", • 12", 14", and 16½"

Malleable iron•

Holds P.O. plug • and basket straight during installation

Ratchet wrench set has • two square and one hex wrench plus a ratchet in a resealable case

390-50198390-50197

390-50130

701-2 771710-2730-10

390-50310

311-10

Faucet Handle Puller

318-4

Removes larger • handles with longer adjustable puller arms

One piece cast cross • bar for strength and durability

Notches ensure • positive and equal positioning of puller arms on cross bar

Alloy steel components•

390-50191


312-2 has a funnel-• shaped cap which is retractable for use in flat sinks

390-50148 has an • extra large bulb for extra thrust

6-in-1 Screwdriver

Hex Key Set Flaring Tools“Papco” Style Deluxe

LevelsTorpedo

Deburring Tool

Includes one dual • ended slotted bit, one dual ended Phillips bit and one 5 ∕16" × ¼" nut driver shank

Replacement • bits available

3• ∕16" O.D. to 5 ∕8" O.D.

Strong, accurate 9" • polycast frame

Non-conductive frame•

Vials read plumb, • level and 45°

Tools for PEX & PB Crimp RingsRight Angle Steel Handle Crimp Ring Removal Tool

Offset tool crimps • rings to ASTM F1807 on 3∕8"–1" pipe

Removal tool allows • for fitting recovery without damaging the fitting sealing surfaces305-91

314-10

318-9

310-09

310-12

308-2

304-06

305-99

Faucet Stem Key

390-50134

Fits: ¼", • 9 ∕32", 5 ∕16" & 11 ∕32" faucet and sillcock stems

Plunger

312-2

390-50148

O-Ring Pick

390-50138


PTFE Packing Rope

Oakum Cement Stop Leak

Perfect for patching • sewer outlet, water service and around drains

Sets up in five minutes•

Mixing cups included • in each jar

5 lb. plastic jar•

Use to pack spigot type • cast iron pipe, cracks around doors, windows, driveways, etc.

Does not irritate skin•

Inspection Mirror

390-50115

Match Holder

PTFE Pipe Thread Tape

390-50110

291-30400

963-15PK2963-05

Disposable Latex Glove Disposable Shoe Covers

Extra large disposable • latex gloves

Powder-free, fits • right or left hand

This product contains • natural rubber latex which may cause allergic reactions in some individuals

Covers dirty work • boots—saves clean up time

Blue-spun • polypropylene, non-waterproof

Fits over shoe • sizes 5–15

390-50178 390-50176

Shower Arm Installation Tool Patent # 6,460,432

Easier shower arm • installations

Allows shower arm • installation with no external marring

Can be used on all • brass shower arms

307-625

335-260


Test Titan™ Mechanical Test Plug

Test Titan™ Cleanout Test Plug

Sizes: 1½", 2", 3", 4" mechanical •

For head tests•

Provides a leak-free seal at over EIGHT times • the PSI of other mechanical test plugs

Back-to-front wedge design prevents • blowouts at high and low temperatures

For cleanouts•

Seals 1 ½"–4" female cleanout threads•

Ideal for use on damaged cleanout openings • and on damaged or deteriorated threads

882-3

882-35

Silicone Lubricantfor O-Rings & Valve Stems

Safe-Flame™

Flame Protection Pad

Dow Corning 111, • FDA approved

Does not deteriorate • o-rings and other EPDM, buna, or rubber seats/seals

Temperature range • –40°F to 400°F

Absorbs heat•

No smoke or odor•

Non asbestos•

9" × 12" blanket• 963-01 390-50160

Test Titan seals from back of gasket to front vs. generic plugs that seal from middle out. The larger gasket allows for sealing uneven cuts.

Test Titan’s shoulder provides a better seal on the top of a pipe vs. a generic plug’s steel plate.

Hollow stem allows the system to be filled with water and provides a controlled drain down with a standard garden hose (stem thread is ¾" male hose thread).


ETCO Expandable Pipe Plug Handy Pump™ Cordless Air Pump

Sizes: ½"–8" •

Cleanout or test • plug for drains and DWV pipe

Can be used with • cast iron, steel, clay and plastic pipe

Economical and • re-usable

Positive sealing• 12V Ni-Cad battery•

150 PSI capacity•

12V connector for • direct voltage supply

Integral digital • pressure gauge

Digital readout • requires two AAA batteries (supplied)

Great for test balls, • expansion tanks, hydrostatic tests

Trigger action with • “lock on” feature

882-ST302882-ECPG

Gas Test Gauge

Three pressure • ranges: 0–15 PSI up to 0–60 PSI

2" diameter steel • case with a shatter proof face

Brass plated body • with brass air valve

Replacement gauge and • manifold available

WOG Pressure Gauge

Five pressure • ranges: 0–60 PSI up to 0–300 PSI

¼" MIP connection •

May be used for • water, oil and gas

2" diameter steel case•

Test AssembliesCombination Air & Water

Air Test Fitting Water Pressure Test Fitting

¾" brass female hose • swivel connection

Use for residential or • commercial tests

Drag pointer indicator • for overnight tests

355-30PK1

356-100PK1 360-300PK1

882-110882-105

Grip Tip™

Test Cap & Test PlugPatent # 6,769,291

881-12C

880-82

Tip acts as a handle • while applying glue and can be snipped for testing

Deeper glue surface•

Durable, virgin ABS • may be glued to pipe with all-purpose glue

24110 South Peculiar DrivePeculiar, Missouri 64078tel: 1-800-821-3944fax: 1-800-758-5950www.siouxchief.com

DISTRIBUTED By

SERVICE & REPAIR BROCHURE – 3/09 ©2009 SIOUX CHIEF MANUFACTURING

Packaging Options Order Catalog

Or visit www.siouxchief.com to order a Sioux Chief cata-log with our complete product offering.

Fill out this form and fax to Sioux Chief at 1-800-758-5950 or mail to PO Box 397, Peculiar, MO, 64078. We will promptly send you a Sioux Chief catalog.

Name ��

Company ��

Address ��

��

City ��

State �� ZIP ��

Phone ��

Email ��

HearthMaster™

Log Lighter AccessoriesHearthMaster™

Gas Ball Valve

Angle or straight • ball valves

Cast brass bodies • with P.T.F.E. seats

½" FIP × ½" FIP with • ¾" NPSM flange thread

150,000 BTU/hr or • 350,000 BTU/hr

For use with both • natural gas and LP gas

949-K09949-P

952

954

949-06

service & repair - donutsdocshare04.docshare.tips/files/3595/35951240.pdf2 sioux chief...

Documents