service & support - techmar & support contents ... up to 63mm shank - 38mm insert cartridge...

Service& Support

Service & Support Contents

Description Page

Calibration Price List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1876 - 1878Conversions - Fractions, Millimetre, Gauge, Inch. . . . . . . . . . . . . . . . . . . . 1882 - 1883Conversions - Spanner & Socket Sizes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1884Conversions - Weights & Measures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1885 Ingress Protection (IP) Ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1880Merchandising Display Stands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1886 - 1887Power Tool Repair & Service. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1879Product Vending & Inventory Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1888 - 1897 Product Vending & Inventory Control - CAPS-VEND™ . . . . . . . . . . . . . . . . . . . . . . . . 1892 Product Vending & Inventory Control - LOCKER-VEND™. . . . . . . . . . . . . . . . . . . . . 1894 Product Vending & Inventory Control - MEDI 365. . . . . . . . . . . . . . . . . . . . . . . . . . . . 1895 Product Vending & Inventory Control - OPTI-VEND™ . . . . . . . . . . . . . . . . . . . . . . . . . 1891 Product Vending & Inventory Control - PPE-365. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1890 Product Vending & Inventory Control - ROTA-VEND™ . . . . . . . . . . . . . . . . . . . . . . . . 1893 Product Vending & Inventory Control - TOOLVEND. . . . . . . . . . . . . . . . . . . 1896 - 1897 Standards For Engineers Drawings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1881Technical Sales Support & CAD Facility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1875Tool Reclamation Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1874Tool Tagging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1879Vibration Testing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1879

CONTRACT PRICES AVAILABLE FOR VOLUME PURCHASES All Prices Exclude V.A.T. © 2010

TOOLING RECLAMATION SERVICESe

rvice &

Support

Advanced Tooling

Technology

Standard ToolholdersRange: Up to 63mm Shank

- 38mm Insert

Cartridge Units“S”, “P” & “U” Type

Boring BarsRange: Up to 50mm Shank

- 22mm Insert

Boring HeadsRange:

Up to 80mm Dia (Fixed)- 140mm Dia (Adj.)

Parting, Threading & Grooving

Range: 40mm Shank

End Mills BodiesRange: 50mm Dia - 2, 3

and 4 Pocket

Milling CuttersRange:

Up to 315mm Diameter

DrillingRange:

Any Style, Any Diameter

Before

After

All quotations on ToolingReclamation can only bepriced on receipt of the

damaged Toolholders/Millingbody.

These must be suppliedcomplete with all the

relevant spares to ensurecompetitive pricing and

prompt repair.

We will make as new,

supplying the spares,

screws, shims etc.,

wherever required at an

additional cost.

Your local distributor offer a Tooling ReclamationService on all makes of standard indexable insertproduction, cutting tools and qualified/specialtools.

The unique machining methods are fullycompatible with original tool manufacturing andguarantee the same pocket precision andrepeatability.

The latest production practices expect the highestlevels of accuracy and productivity to be combinedin specific tooling. All are required to performtasks at the limits of their original designcapacities.

They are cutting tools from which today’s Engineers demand superlative performance and therefore, when damage occurs, superior methods of reclamation are required if the benefits of quality, accuracy and reliability are to be restored.

Specials: No matter how complex we can reclaim in almost every instance. All that is required is a drawing and insert for each pocket type, including all relevant spares.

PRODUCT SUPPORT DIVISION

Page1875CONTRACT PRICES AVAILABLE FOR VOLUME PURCHASES All Prices Exclude V.A.T. © 2010

Serv

ice &

Support

Product Support Division - Advice & SupportUtilising technical tooling engineersand machines to test both new andexisting tooling to ensure productquality. Comprehensive testing andproduct evaluation facilities available.

Product testing capabilities:Drills - taps - shank cutters - reamers -bore cutters - carbide inserts - collets -toolholders - backend tooling - threadmills - solid carbidetooling - millingchucks - part offgrooving tools -counter boringtools.

PRODUCTSUPPORT

All products sold by our company can be fullysupported both via telephone and on the machinesby our fully experienced team of technicalengineers.

“We Sell & Support”

Product application advice.

Tooling packages quotations.

Staffed by skilled and experiencedengineers. Advice given on improvedmanufacturing processes. Current and prototype tool testinghandled.CNC machine capabilities.Component processing and Toollayouts.Production engineering adviceavailable.Product features and benefits areanalysed.

Technical Engineering Products - Application Support Team

Production Engineering - Analysis & Improvement

CAD - Computer Aided Design Facilities AvailableExperienced Design Engineers combine CAD capabilitywith knowledge from engineering industry.Tooling and design facility dedicated to individual andspecific tooling design packages.Dedicated and experienced design engineers who areindependent technical solution providers.


CALIBRATION PRICE LIST UKAS CERTIFICATES UNLESS OTHERWISE STATEDSe

rvice &

Support

Our purpose-built UKASaccredited calibrationlaboratory and repairworkshop provides arepair and calibrationservice for a wide rangeof dimensionalmeasuring equipmentand torque tools.

The calibration Laboratory occupies an area of over 100 square metres on anisolated vibration free floor and isenvironmentally controlled to 20°C ± 0.5°C toprovide the necessary conditions for accuratemeasurement and calibration.The Laboratory conforms to InternationalStandard BS EN ISO/IEC 17025 (Generalrequirements for the competence of testingand calibration laboratories).We can offer fast turnaround on calibrationtogether with the back-up of a repairworkshop, with extensive stocks of spareparts and replacement equipment.

PROCEDURESCalibration procedures used are documentedand UKAS approved.All equipment submitted for calibration iscleaned, inspected and prepared prior tocalibration. Minor burrs, which may bedetrimental to calibration, are removed. If anitem is found unsuitable for calibration at thisstage, a quotation for repair/service orreplacement may be issued. Otherwise theitem will be returned as receiveduncalibrated.Generally, calibration is carried out to thecurrent issue of the relevant British orInternational Standard, or manufacturer'sspecification, where available.

ON-SITE CALIBRATIONThe calibration of large surface tables andhigh-resolution electronic digital heightgauges, can be carried out 'on-site' at thecustomer's premises. A quotation for thiswork can be obtained via your local branch.

TORQUE TOOLSAs well as a wide range of dimensionalmeasuring equipment the Metrology divisionis able to service/repair and calibrate mostbrands of torque wrenches and torquescrewdrivers.We can calibrate and issue UKAS certificatesfor wrenches up to and including 1000Newton-metres (750 foot pounds).

CERTIFICATIONCertificates issued are UKAS accreditedunless agreed otherwise.The current issue of our UKAS scope may beviewed by visiting the web site;www.ukas.org (Laboratory no. 0244) or bycontacting the Laboratory direct.'In House' traceable certificates can beissued on certain specific items which do notfall within our UKAS scope. Calibration workis carried out to the stringent requirements ofour quality system and certificates aretraceable to national standards via traceableequipment certification. The customer wouldbe informed of this option before any work iscarried out. Note: 'In House' certificates arenot accredited or assessed by any outsideorganisation (e.g. UKAS).All calibration prices are inclusive ofcertificates.

For items not listed, specialrequirements or technical enquiries

the metrology division may be contacted direct

Tel: 0116 257 2338 Fax: 0116 288 8843or contact your local branch

UKASCalibrationServiceAvailable

SERVICING QUALITY BRANDS...

UKAS CERTIFICATES UNLESS OTHERWISE STATED CALIBRATION PRICE LIST


Serv

ice &

Support

Angle Plates - Right Angle1 Up to 250mm/10” Longest Side £36.002 Above 250mm/10” Longest Side £42.00

Angle Plates - Box Angle3 Up to 250mm/10” Longest Side £45.004 Above 250mm/10” Longest Side £55.00

Bore Gauges - Dial/Digital 5 One Stem £26.006 Additional Stems £10.00

Calipers - Vernier/Dial/Digital7 Up to 200mm/8” £19.508 Up to 300mm/12” £24.509 Up to 600mm/24” £32.00

10 Up to 1000mm/40” £44.0011 Up to 1500mm/60” £64.5012 Up to 2000mm/80” £77.50

Combination Set13 Per Set £33.0014 Per Individual Item £13.00

Comparators - External15 Mechanical £52.5016 Electronic (2 Scales) £64.5017 Additional Scales (Per 2) £12.5018 Worktable/Platen Only £19.50

Cylindrical Setting Standards19 Each £10.50

Depth Gauges - Vernier/Dial/Digital20 Up to 300mm/12” £19.0021 Above 300mm/12” £32.0022 Protractor/Rule Type £21.50

Dial Gauges - Plunger Type (Course Reading)23 0.01mm/0.001”/0.0005”24 Up to 25mm Travel £19.0025 Over 25mm Travel £24.50

Dial Gauges - Plunger Type (Fine Reading)26 0.002mm/0.0001” £24.50

Dial Gauges - Lever Type27 All £19.00

Dial/Digital Thickness Gauges/Calipers28 Internal/ External £26.00

Digital Indicators29 Up to 12.7mm/0.5” Range £26.0030 Above 12.7mm/0.5” Range £32.00

Digital Scale Units31 Up to 300mm/12” £24.5032 Up to 600mm/24” £32.00

Feeler Gauges33 Sets - Per Blade £1.7034 Individual Blades £6.00

Gap/Snap Gauges - Plain35 Per Gauge £15.00

Height Gauges - Vernier/Dial/Digital36 Up to 450mm/18” £33.0037 Up to 600mm/24” £38.5038 Up to 1200mm/48” £57.00

Height Gauges - Electronic*39 High Resolution Digital £85.00

*On-site calibration available. Contact local branch or the laboratory for more details/quotation. POA

40 Calibration Block for above £16.00

Height Micrometer41 All sizes £51.5042 Riser Block for above - All Sizes £18.00

Hole Gauges (E.G Kwik Check Type)43 In-House Certificate - NOT UKAS £24.50

Micrometers - External Fixed (Including Digital)(Setting Rods Extra - See items 49 - 52)

44 Up to 100mm/4” (Max Range) £13.0045 Up to 300mm/12” £16.0046 Up to 600mm/24” £22.5047 Up to 1000mm/40” £32.5048 Above 1000mm/40” POA

Micrometer Setting Standards49 Up to 300mm/12” £6.0050 Up to 600mm/24” £8.0051 Up to 1000mm/40” £13.0052 Above 1000mm/40” £22.00

Micrometer Head53 Up to 25mm/1” Max Range £26.0054 Up to 50mm/2” Max Range £36.50

Micrometers - Depth55 0 - 25mm/1” Max Range £16.5056 0 - 75mm/3” £19.0057 0 - 150mm/6” £26.0058 0 - 225mm/9” £35.5059 0 - 300mm/12” £41.50

Micrometers - External AdjustableExcluding Setting Rods (See Items 49 - 52)

60 2 Extension Rods 0 - 50mm/2” £19.0061 4 Extension Rods up to 600mm/24” £30.0062 4 Extension Rods above 600mm/24” £40.0063 6 Extension Rods up to 600mm/24” £42.0064 6 Extension Rods above 600mm/24” £54.00

Micrometers - Internal/Stick65 Head including 1 Extension Rod £18.0066 Each additional Rod/Spacer £3.00

Micrometer Internal 67 Fixed Head £18.00

Micrometers - 3-Point Bore (including Digital)

68 Excluding Setting Ring (See Items 72 - 74)69 Per Head - up to 100mm/4” £19.0070 Per Head - above 100mm/4”

up to 200mm/8” £33.00Setting Ring for above

71 Up to 10mm/0.4” £15.0072 Up to 100mm/4” £12.5073 Above 100mm/4” £15.00

ID Description: Type & Range Price ID Description: Type & Range Price ID Description: Type & Range Price

ID Description: Type & Range Price ID Description: Type & Range Price ID Description: Type & Range Price

Page1878 CONTRACT PRICES AVAILABLE FOR VOLUME PURCHASES All Prices Exclude V.A.T. © 2010

Serv

ice &

Support

Micrometers - Internal 74 Caliper Type £16.50

Micrometer - Screw Thread Type75 Metric/Unified/Whitworth £18.5076 V Anvil - 3 or 5 Flute £18.50

Parallels - Engineers77 Per Pair £26.00

Pin Gauges/Drill Blanks78 Sets up to 50 (price per pin) £1.2079 Sets above 50 (price per pin) £0.95

Plug Gauges - Plain80 Parallel - Single Ended £5.5081 Parallel - Double Ended £10.0082 Plain Taper £19.00

Plug Gauges - Screw*83 Parallel - Single Ended £8.0084 Parallel - Double Ended £13.0085 Screw Taper £22.50

*Effective Diameter only -Other parameters POAAcme & Specials POA

Protractors 86 Bevel Vernier £33.0087 Depth Gauge Type £21.50

Radius Gauges88 Per Blade (2 Rads) £3.00

Ring Gauges - Plain/Setting89 Up to 10mm/0.4” £15.0090 Above 10mm/0.4” up to 100mm/4” £12.5091 Above 100mm/4” £15.0092 Plain Taper £22.50

Ring Gauges - Screw*93 Parallel £13.0094 Taper £24.50

*Effective Diameter only -Other parameters POAAcme & Specials POA

Rules - Engineer’s (1 Side/2 Edges)95 Up to 12”/300mm £19.0096 Up to 40”/1000mm £32.0097 Up to 80”/2000mm £50.00

Rules - Engineer’s (2 Sides/4 Edges)98 Up to 12”/300mm £32.0099 Up to 40”/1000mm £50.00

100 Up to 80”/2000mm £92.50

Screw Caliper Gauges101 (Calibration Subject to Master Gauge

Availability) £19.00102 Regrind/Reset & Calibration £44.00

Screw Thread Parallels103 Per pair £14.00

Screw Thread Measuring Wires/Cylinders104 Per pair £11.00105 Per set of 3 £15.00

Sine Bars & Plates106 Up to 500mm Length £33.00

Sine Tables - Simple Angle107 Up to 500mm Length £38.50

Slip Gauges/Gauge Blocks - Steel/T. CarbideMetric Sizes

108 M112 £174.00109 M103 £162.00110 M88/M83/M76 £151.00111 M47 £81.00112 M41 £68.50113 M32 £58.50114 M8/M9/M11 £26.00

Imperial Sizes115 E81 £144.00116 E68 £119.00117 E49 £81.00118 E41/E35/36 £71.50119 E28 £48.00120 E8/E9/E11 £26.00

Slip Gauges/Gauge Blocks - Individual121 Up to 100mm/4” £6.00

Spirit Levels122 Engineer’s Type £33.00123 Precision or Block Type £38.50124 Construction Type £24.50

Squares - Engineer’s125 Up to 300mm/12” £26.00126 Up to 600mm/24” £32.00127 Up to 900mm/36” £45.00

Squares - Cylindrical128 Up to 300mm/12” £38.50129 Above 300mm £45.00

Straight Edges - Steel or Granite(In-House Certificate - NOT UKAS)

130 Up to 300mm/12” £21.00131 Up to 600mm/24” £28.00132 Up to 1000mm/40” £33.00133 Up to 2400mm/96” £40.00

Surface Plates/Tables* - Cast Iron or Granite

134 Up to 450mm (18”) Longest Side £42.50135 Up to 750mm (30”) Longest Side £58.00

*On-site calibration available for Large Plates & Tables. Contact your local branch or the laboratory for more details/quotation. POA

Tapes (Pocket Retractable Only) (In-House Certificate - NOT UKAS)

136 up to 5 Metres/16 feet £25.00137 up to 10 Metres/33 feet £33.00

Telescopic/Small Hole Gauges(In-House Certificate - NOT UKAS)

138 Functional Check Only - Per Gauge £5.00

Torque Wrenches/Screwdrivers139 up to 350 N.m/250 lbf.ft £33.00140 up to1000 N.m/750 lbf.ft £38.50141 Setting Only - Preset Type

(No Certificate) £7.50

Vee Blocks142 Single Vee (per pair) £33.00143 Double Vee (per pair) £38.50144 4 Vees (per pair) £51.50

Vee Groove Cylindrical Setting Standards145 (SIP Type) Per Standard £101.00

CALIBRATION PRICE LIST UKAS CERTIFICATES UNLESS OTHERWISE STATED

POWER TOOL REPAIR & SERVICE / VIBRATION TESTING & TOOL TAGGING


Serv

ice &

Support

...AND OTHER QUALITY BRANDS

We can now offer servicing and repair byfour manufacturer trained engineers onKobe, Toshiba, Makita, Hitachi, Dewalt,Osaki, Toku , CP, Desoutter, Dynabrade,Ingersoll-Rand, Atlas Copco, ATA, Dotco,Magtron and Bosch brands of electricand pneumatic power tools. We arewarranty agents for BOLD print brands.Upon receipt of each machine thefollowing procedure is followed to ensuretraceability and safety.1. Each machine is engraved with a job

number.2. If applicable an electrical safety

(P.A.T.) check is carried out, themachine is then load tested todiagnose fault. (The P.A.T. is F.O.C. if a tool isrepaired. P.A.T. ONLY = £6.25)

3. The machine is then completelystripped and each component isindividually inspected for failure.

4. A written quotation is sent to the localbranch or directly to the customer ifrequired.

5. Upon acceptance of the quote themachine is then repaired, electricalsafety, including flash test (ifapplicable) checked and then testedunder load in accordance with themanufacturers specifications.

6. If the machine is beyond economicalrepair or the quote is not acceptedthe tool is returned unassembled. Thetool can be rebuilt if it is safe and willcomply with the health and safety atwork act part one sections one tothree, but there will be a charge!

7. All machines can be supplied with anelectrical safety certificate (atested/retest label is also attached tothe equipment) to comply with theHealth and Safety guidance notePM32 on completion of repair.

8. All parts replaced are covered by athree-month manufacturers warranty.

9. Air tool servicing includes replacingminor parts o-rings, grease, oil etc.

On-site testing and assessmentof all your tools, plant andequipment for vibration (HAV,WBV) and noise exposure.• Return to base testing at the

purpose built test facilitywhere your tools andequipment can be pre-testedagainst your definedprocesses. (EN5349)

These testing services offercompanies the opportunity tofurther improve their vibrationcontrol programs:• ‘Real world' risk assessment

of currently used tools.

• Assessment in the variationsof vibration for differentapplications and tool usage(specialised applications).

• Study of specialistapplications.

• Purchasing decisions.• Consumable evaluations.• Establish productivity data for

further risk assessment.The differences betweenequipment new and old, the jobthe tool is used for and the typeand quality of consumablesused can show significant

differences in vibration level andproductivity.We are here to help you relatethis into meaningful and usefulinformation that applies to howyou use your equipment.

We can now offer a new range of Tool & Equipment Tagging Systems forassisting with vibration management andexposure information. The range of tagsand labels are strong and durable makingthem ideal for use on power tools andother demanding applications.Available in Red, Amber and Green allowsfor immediate recognition of high,medium and low risk using a Traffic Lightstyle colour coding system. Other coloursare available for general use and whenprinted with Risk Reduction Information

these form an effective part of yourvibration management and controlprocedures.

Rigid tag and Flexi tag are both strongand versatile with easy fixing usingstandard cable ties. Rigid tag can beprinted both sides and flexi tag also givesyou the option of using a printing systemfor on-demand use.Added fixing strength is easily achievedwith our tag fixing kit comprising ofaluminium ferrules and coated wire rope.A complementing range of self adhesivelabels is also available in a range of sizesfor smaller tools or where the warning andsafety information needs to be repeated.

Vibration Testing Services - Hand Arm and Whole Body Vibration

Electric & Air Tool Repair and Servicing Division

For further details Tel: 0116 257 2397

For further details contact your local branch

Common symptoms of Hand ArmVibration Syndrome (HAVS).

Tool & Equipment Tagging Systems See pages 1818 - 1819 for full product listing


INGRESS PROTECTION (IP) RATINGSSe

rvice &

Support

Ingress Protection (IP) RatingsIngress Protection (IP) ratings are developed by the European Committee for Electro TechnicalStandardization (CENELEC) (described IEC/EN 60529), specify the environmental protection anenclosure provides. In order to comply with stringent requirements for CE Marking, machinemakers today are fitting their machines with parts that are certified according to EU (EuropeanUnion) and international standards.

The IP rating normally has two (or three) numbers:

IP First Number - Protection from solid objects or materialsIP Second Number - Protection from liquidsIP Third Number - Protection against mechanical impacts

(commonly omitted)

Example - IP Rating

5 describes the level of protection from solid objects and 4 describes the level of protection from liquids.

II PP 55 441

1

2

2

3

3Protection against

solid objects0 No protection.1 Protected against solid objects up to

50mm, e.g. accidental touch byhands.

2 Protected against solid objects up to12mm, e.g. fingers.

3 Protected against solid objects over2.5mm (tools and wires).

4 Protected against solid objects over1mm (tools, wire, and small wires).

5 Protected against dust limitedingress (no harmful deposit).

6 Totally protected against dust.

Protection againstliquids

0 No protection.1 Protection against vertically falling

drops of water e.g. condensation.2 Protection against direct sprays of

water up to 15° from the vertical.3 Protected against direct sprays of

water up to 60° from the vertical.4 Protection against water sprayed

from all directions o limited ingresspermitted.

5 Protected against low pressure jetsof water from all directions o limitedingress.

6 Protected against low pressure jetsof water, e.g. for use on ship decks -limited ingress permitted.

7 Protected against the effect ofimmersion between 15cm and 1m.

8 Protects against long periods ofimmersion under pressure.

Protection againstmechanical impacts(commonly omitted)

0 No protection.1 Protects against impact of 0.225

joule (e.g. 150g weight falling from15cm height).

2 Protected against impact of 0.375joule (e.g. 250g weight falling from15cm height).



5 Protected against impact of 6.0joule (e.g. 1.5kg weight falling from40cm height).

6 Protected against impact of 20.0joule (e.g. 5kg weight falling from40cm height).

STANDARDS FOR ENGINEERS DRAWINGS


Serv

ice &

Support

40 PagesPocket Size164 x 84mm

�FLIP-UP

ANTI-GLAREMATT LAMINATED

EDITION

CAT-849-0356C See page 1449 for

further information.

FOURTH EDITIONExtended Content Version

Conversions Supplied By

The Pocket

REF• Basic forms of heat treatment • Material groups• Tensile strength and hardness • Lubricant selection• Hole and shaft tolerances • Metric screw and hole sizes • Thread Notation• Standard thread forms;• Dimensions of common shank types• Standards for engineering drawings• Abbreviations used in engineering drawings• Common CNC codes• Axis Nomenclature for Machine Tools• Trigonometry formulae• Sines and cosines• Tangents and cotangents • Co-ordinates for equally pitched holes• Bending allowances for malleable materials• Cutting Speed Calculator• Standard drill size conversions;• Abbreviations and formulaes • Weight and measure systems, useful

conversions and constants


CONVERSIONS Fraction, Millimetre, Gauge, inchSe

rvice &

Support

Fraction, Millimetre, Gauge, Inch CONVERSIONS


Serv

ice &

Support

The ‘Engineers Reference Handbook’

• A handy pocket sized reference booklet of data charts and tables.

• Suitable for the drawing office, toolroom or workshop.

• 9 sections.

�DESK

EDITION209 Pages

Handbook Size148 x 100mm

CAT-849-0356A See page 1449 for further information.

Conversions Supplied By

The

REF


CONVERSIONS Spanner & Socket SizesSe

rvice &

Support

4 2 2 & 2.24.5 2.35 2.5 2.5

5.5 3 3 3 & 3.56 3.5 3.5

7 4 4 4 & 4.5

8 5 5 59 5 Alt

10 6 6 611 7 7 71213 8 8 814 8 Alt15 10 KFZ1617 10 10 101819 12 12 12202122 14 14 14 122324 16 16 16252627 18 18 18 1628

1830 20 20 2032 22 22 22 20

36 24 24 24 223841 27 27 27 24

46 30 30 30 27

50 33 33 33

55 36 36 36

60 39 39 39

65 42 42 42

70 45 45 45

75 48 48 48

80 52 52 5285 56 56 5690 60 60 6095 64 64 64

100 68 68 68105 72 72 72110 76 76 76115 80 80 80120 85 85 85125

130 90 90 90135 95 95 95140145 100 100 100150 105 105 105155 110 110 110160165 115 115 115170 120 120 120

mm

German(BRD)metric

accordingto DIN

and ISO

FranceN F E

27-311(69)

27-411(69)

SwedenS M S2164 -19672175 -1971

Metric for DIN

6914 -6915

0.152 3.86 8BA0.172 4.37 7BA0.193 4.90 6BA0.220 5.59 5BA0.248 6.30 4BA0.256 6.50 1/16W0.282 7.16 3BA0.297 7.54 3/32W0.324 8.23 2BA0.340 8.64 1/8W (3/16)0.365 9.27 1BA0.413 10.49 0BA (7/32)0.445 11.30 3/16W 1/4

0.525 13.34 1/4W 5/16

0.600 15.24 5/16W 3/8

0.710 18.03 3/8W 7/16

0.820 20.83 7/16W 1/2

0.920 23.37 1/2W 9/16

1.010 25.65 9/16W 5/8

1.100 27.94 5/8W (11/16)

1.200 30.48 11/16W 3/4

1.300 33.02 3/4W 7/8

1.390 35.31 13/16W (15/16)

1.480 37.59 7/8W 1

1.670 42.42 1W 11/8

1.860 47.24 11/8W 11/4

2.050 52.07 11/4W 13/8

2.220 56.39 13/8W 11/2

2.410 61.21 11/2W 15/8

2.580 65.53 15/8W 13/4

2.760 70.10 13/4W 2

76.70 17/8W3.150 80.01 2W 21/4

3.550 90.17 21/2

3.890 98.81 23/4

4.180 106.17 3

4.530 115.06 31/4

4.850 123.19 31/2

5.180 131.57 33/4

5.550 140.97 4

6.380 162.05 41/2

InchDecimal

BSM

mmEquivalent

BA&

BSWBSF

5/32 0.1562 3.97

3/16 0.1875 4.767/32 0.2187 5.561/4 0.2500 6.35

9/32 0.2812 7.14 No. 10

5/16 0.3125 7.9411/32 0.3438 8.733/8 0.3750 9.52

13/32 0.4062 10.327/16 0.4375 11.11 1/4 1/4 1/4 1/4

1/2 0.5000 12.70 5/16 1/4 5/16 5/16 1/4

9/16 0.5625 14.29 3/8 5/16 3/8 3/8 5/16 5/16

19/32 0.5938 15.085/8 0.6250 15.88 7/16 7/16 3/8

11/16 0.6875 17.46 3/8 7/16 3/8

3/4 0.7500 19.05 1/2 7/16 1/2 1/2 7/16 7/16

25/32 0.7812 19.8413/16 0.8125 20.64 9/16 9/16 1/2

7/8 0.8750 22.22 1/2 1/2 9/16 1/2

15/16 0.9375 23.81 5/8 5/8 5/8 9/16

1 1.0000 25.40 5/8

1 1/16 1.0625 26.99 5/8 5/8 5/8

11/8 1.1250 28.58 3/4 3/4 3/4 3/4

13/16 1.1875 30.1611/4 1.2500 31.75 3/4 3/4 3/4

15/16 1.3125 33.34 7/8 7/8 7/8

13/8 1.3750 34.9217/16 1.4375 36.51 7/8 7/8 7/8

11/2 1.5000 38.10 1 1 1 115/8 1.6250 41.28 1 1 1

111/16 1.6875 42.86 11/8 11/8 11/8 11/8

13/4 1.7500 44.45113/16 1.8125 46.04 11/8 11/8 11/8

17/8 1.8750 47.62 11/4 11/4 11/4 11/4

2 2.0000 50.80 11/4 11/4 11/4

21/16 2.0625 52.39 13/8 13/8 13/8 13/8

23/16 2.1875 55.56 13/8 13/8 13/8

21/4 2.2500 57.15 11/2 11/2 11/2 11/2

23/8 2.3750 60.32 11/2 11/2 11/2

27/16 2.4375 61.91 15/8

29/16 2.5625 65.09 15/8 15/8

25/8 2.6250 66.68 13/4 13/4

23/4 2.7500 69.85 13/4 13/4 13/4

213/16 2.8125 71.44 17/8

215/16 2.9375 74.61 17/8 17/8

3 3.0000 76.20 2 231/8 3.1250 79.38 2 2 233/8 3.3750 85.72 21/4 21/4

31/2 3.5000 88.90 21/4 21/4 21/4

33/4 3.7500 95.25 21/2 21/2

37/8 3.8750 98.42 21/2 21/2

41/8 4.1250 104.78 23/4 23/4

41/4 4.2500 107.95 23/4 23/4 23/4

41/2 4.5000 114.30 3 345/8 4.6250 117.48 3 3 347/8 4.8750 123.82 31/4

5 5.0000 127.00 31/4

51/4 5.2500 133.35 31/2 31/2

53/8 5.3750 136.52 31/2

55/8 5.6250 142.88 33/4 33/4

53/4 5.7500 146.05 33/4

6 6.0000 152.40 4 461/8 6.1250 155.58 4

AF

UN

InchDecimal

mmEquivalent

NominalSeries

HeavySeries Nuts Bolts & Screws

SquareBolt

Hex BoltHex CapScrew

(FinishedHex Bolt)Lag Screw

Heavy HexBolt

Heavy HexScrewHeavy

StructuralBolt

Hex FlatHex Flat

JamHex Jam

HexSlotted

Hex ThickSlotted

HexCastle

HeavySquare

Heavy HexFlat

Heavy HexFlat Jam

Heavy HexHeavy Hex

JamHeavy Hex

Slotted

Square Nut

Unified Standard ANSI B 18.2.1 - 1972

Thread Size

Head Size(Spanner

Size,Across Flats)

Thread Size(Spanner Size)

Head Size(Across Flats)

Thread Size

Head Size(Spanner Size,Across Flats)

Weights & Measures CONVERSIONS


Serv

ice &

Support

C = CentigradeF = Fahrenheitft = Feetg = Gramgal = UK Gallonhp = Horse Power

in = InchK = Kelvinkg = Kilogramkm = KilometreKw = Kilowattl = Litre

lb = Poundmm = Millimetremtr = Metreoz = Ouncept = UK Pintyd = Yard

To Convert MultiplyFrom Imperial To Metric By°F °C °C=(°F -32) x 5/9°F °K °K=°C + 271.3ft mtr 0.3048ft2 mtr2 0.092903ft3 mtr3 0.028317ft-lbs kg-m 0.13826ft-tons tonne-mtr 0.3097gal ltr 4.54609gal/ft2 ltr/m2 48.905grains/gal gm/ltr 0.01425hp kw 0.7457in mm 25.40in2 cm2 6.4516in2 mm2 645.16in3 cm3 (cc) 16.3871in-tons kg-m 25.8lb kg 0.45360lb/ft kg/m 1.488lb/ft2 kg/m2 4.883lb/ft3 kg/m3 15.020lb/gall kg/ltr 0.09983lb/in2 (PSI) kg/cm2 0.07037lb/in2 (PSI) kg/mm2 0.0007037lb/in2 (PSI) kg/mtr2 703.7lb/mile kg/km 0.2818lb/yd kg/m 0.496lb/yd3 kg/m3 0.5933nautical mile km 1.8532miles km 1.60934miles2 km2 2.58999oz g 28.3495pt ltr 0.568261tons tonnes (1000kg) 1.01605tons/ft kg/m 3333.33tons/ft2 tonnes/m2 10.936tons/in2 kg/mm2 1.575tons/in2 n/mm2 15.444tons/yd kg/m 1111.11tons/yd2 tonnes/m2 1.215tons/yd3 tonnes/m3 1.329yd mtr 0.9144yd2 mtr2 0.836127yd3 mtr3 0.764555

To Convert MultiplyFrom Metric To Imperial By°C °F °F=(°Cx9/5)+32°K °F °F=(°K-271.3)x1.8+32cm2 in2 0.155cm3 (cc) in3 0.06102g oz 0.035274gm/ltr grains/gal 70.156kg lb 2.2046kg/cm2 lb/in2 (PSI) 14.223kg/km lb/mile 3.548kg/ltr lb/gal 10.022kg/m lb/ft 0.672kg/m lb/yd 2.016kg/m tons/ft 0.0003kg/m tons/yd 0.0009kg/m2 lb/ft2 0.2048kg/m3 lb/ft3 0.0624kg/m3 lb/yd3 1.686kg/mm2 lb/in2 (PSI) 1421.06kg/mm2 tons/in2 0.635kg/mtr2 lb/in2 (PSI) 0.00142kg-m in-tons 0.03875kg-m ft-lbs 7.233km nautical miles 0.5396 km miles 0.62137km2 miles2 0.38610kw hp 1.341ltr gal 0.21997ltr pt 1.75975ltr/m2 gall/ft2 0.0204mm in 0.03937mm2 in2 0.00155mtr yd 1.09361mtr ft 3.28084mtr2 yd2 1.19599mtr2 ft2 10.76391mtr3 yd3 1.30795mtr3 ft3 35.31467N/mm2 tons/in2 0.06475tonne-m ft-tons 3.229tonnes (1000kg) tons 0.9842tonnes/m2 tons/ft2 0.0914tonnes/m2 tons/yd2 0.823tonnes/m3 tons/yd3 0.752

Metric Weight10 Milligrams 1 Centigram10 Centigrams 1 Decigram10 Decigrams 1 Gram10 Grams 1 Decagram10 Decagram 1 Hectogram10 Hectograms 1 Kilogram10 Kilograms 1 MyriagramMetric Length10 Millimetres 1 Centimetre10 Centimetres 1 Decimetre10 Decimetres 1 Metre10 Meters 1 Decametre10 Decametres 1 Hectometre10 Hectometres 1 Kilometre10 Kilometres 1 Myriametre1 Metre 1.094 Yards, 39.371in

Metric Surface Area1 sqmtr 1 Centiares10 Centiares 1 Deciare10 Deciares 1 Are, (100 sq metres)10 Ares 1 Dekare10 Dekares 1 Hectare (10,000 sqmtr)100 Hectares 1 Sq km

Metric Capacity10 Millilitres 1 Centilitre10 Centilitres 1 Decilitre10 Decilitres 1 Litre10 Litres 1 Decalitre10 Decalitres 1 Hectolitre10 Hectolitres 1 Kilolitre

Imperial Weight (Avoirdupois)Used for General Merchandise

16 Drams 1 Ounce(4371/2 Grains Troy)

16 Ounces 1 Pound(7000 Grains Troy)

14 Pounds 1 Stone28 Pounds 1 Quarter 100 Pounds 1 Cental

4 Quarters 1 Hundredweight(112 Pounds)

2000 Pounds 1 Short Ton 20 Hundredweight 1 Ton (2240 Pounds)

Avoirdupois pounds are greater than Troy in the proportion of 17 to 14 approx; Troy ounces are greater thanAvoirdupois in the proportion of 79 to 72 approx.

Imperial Surface Area144 Square inches 1 Square foot9 Square feet 1 Square yard301/4 Square yards 1 Square pole40 Square poles 1 Rood4 Roods 1 Acre640 Acres 1 Square mile

7.92 inches is equal to one hundredthof a “Gunter’s Chain” (22 yards) whichis (was) commonly used by surveyors.An “Engineer’s link” is equal to 12inches and a chain is therefore 331/3

yards (100 feet)

Imperial Cubic Capacity1728 Cubic Inches 1 Cubic Foot 27 Cubic Feet 1 Cubic Yard5 Cubic Feet 1 Barrel Bulk40 Cubic Feet 1 Ton Shipping40 Cubic Feet 1 Load Hard Timber50 Cubic Feet 1 Load Foreign Fir

Imperial Length3 Barleycorns 1 Inch3 Inches 1 Palm4 Inches 1 Hand 7.92 Inches 1 Link9 Inches 1 Span12 Inches 1 Foot18 Inches 1 Cubit30 Inches 1 Pace3 Feet 1 Yard 37.2 Inches 1 Scottish Ell45 Inches 1 English Ell5 Feet 1 Geometrical Pace6 Feet 1 Fathom51/2 Yards 1 Pole4 Poles 1 Chain 100 Links 1 Chain10 Chains 1 Furlong220 Yards 1 Furlong608 Feet 1 Cable8 Furlongs 1 Mile (land)10 Cables 1 Nautical Mile1 Nautical Mile 1.1515 land Miles1 Knot 1 Nautical Mile3 Miles (land) 1 League

Imperial CapacityUsed for Liquids and Dry Goods

4 Gills 1 Pint2 Pints 1 Quart4 Quarts 1 Gallon2 Gallons 1 Peck4 Pecks 1 Bushel8 Bushels 1 Quarter5 Quarters 1 Load36 Bushels 1 Chaldron

A bushel of wheat on an average weighs60 pounds; of barley, 47 pounds; ofoats, 40 pounds. The gallon contains10 pounds avoirdupois of distilledwater.

Decimal CapacityPints Gallon Cub.Ft. Litres

1 0.125 0.0200 0.5688 1.000 0.1604 4.54416 2.000 0.3208 9.082

Troy Weight24 Grains 1 Pennyweight20 Pennyweight 1 Ounce (480 Grains)12 Ounces 1 Pound (5760Grains)

Diamonds and Pearls are weighed byCarats, of 4 grains each (equal to 3.2Troy grains). The Troy ounce is equalto 150 Diamond Carats. Gold, whenpure, is 24 Carats fine; if it containsone part alloy it is said to be 23Carats, and so on.

Apothecaries’ WeightUsed for Dispensing Drugs, etc.

20 Grains 1 Scruple 3 Scruples 1 Dram8 Drams 1 Ounce 12 Ounces 1 Pound

Apothecaries’ Fluid Measure60 Minims 1 Dram8 Drams 1 Ounce20 Ounces 1 Pint8 Pints 1 Gallon


MERCHANDISING DISPLAY STANDSSe

rvice &

Support

Colour Order CodeCAT-849

Grey/Red -1900AYellow/Black -1901A

Light Blue/Dark Blue -1902A

Merchandising Display StandsUniversal stands suitable for displaying a wide range of productsat shows or trade counters. Manufactured from durable mild steel with a choice of 3 differentpainted finishes.

NB. This product display is shown for example of product layout only. Not actual stands.

Product not included with stands.

Create Eye Catching Product Displays!

Display stands supplied with 320mm deep shelf and 40 hooks in 3 lengths to display a wide variety of products.• 2 piece leg design and individual backpanel slats for convenient storage and transport size. • Side and front kick panels. • 240V illuminated header box with replaceable facia panel. • Hand adjustable rear tension wire and cross bar stabilisers for rigid construction. • Units can be linked together to span any distance. • Height adjustable feet to level stands on uneven surfaces. • Dimensions (HxWxD): 1130/2260mm x 1000mm x 450mm.

Contents:2 x 2 piece legs, 2 x leg connectors, 2 x cross bar stabilisers, 6 x individual backpanel slats, 1 x shelf (not shown), 1 x 390mm deep base shelf, 1 x front kickplate, 40 x hooks (15 x 75mm, 20 x 150mm, 5 x 200mm), 2 x tension wires &adjusters, 1 x Header lightbox with plain white panel. Branded fascia panels available separately (see opposite page).

Brandedfascia panels

suppliedseparately

MERCHANDISING DISPLAY STANDS


Serv

ice &

Support

For furtherdetails contact your local Dealer

Branded Fascia Panels for Light Box

Brand Order CodeCAT-849

KENNEDY -1960AOXFORD -1961ASOLENT -1962A

CTL -1963ARUTLAND -1964AYAMOTO -1965ASENATOR -1966A

SWISS+TECH -1967AKOBE -1968A

SHERWOOD -1969AYORK -1970A

Colour Order CodeCAT-849

Red -1920AYellow -1921A

Light Blue -1922A

Shelf

Length Order CodeCAT-849

75mm -1940A150mm -1941A200mm -1942A

HooksTo fit perforated display stand backpanels.Available in three lengths.

Display Stand Accessories Display PackagingHeavy Duty Display CardsManufactured from toughpolypropylene. Availablein two sizes with pre-punched holes which willaccept cable ties featuredon the right. Suitable forscrewdrivers, pliers,spanners, hammers etc.

Display WalletsManufactured from PVC.Suitable for chisels, augerbits, scissors, rules,punches etc.

Overall Size Pocket Size Order Code(Length x Width) (Length x Width) KEN-988360 x 108mm 305 x 105mm -2900K300 x 95mm 250 x 95mm -2920K240 x 75mm 190 x 75mm -2940K265 x 40mm 210 x 40mm -6160K330 x 55mm 270 x 55mm -6180K

Display Wallets

Overall Size (Length x Width) Order CodeKEN-988

360 x 108mm -2900K300 x 95mm -2920K

Heavy Duty Display Cards

HeavyDutyDisplayCards

DisplayWallets

[ the concept ]VENDA 365 is a ttoottaall iinnvveennttoorryy aanndd ccoosstt ccoonnttrrooll ssyysstteemm,,which allows a wide variety of users to dispense and trackproducts, tools, components, etc across the organisation withcomplete accuracy and total confidence. This technically uniqueand highly versatile system is being continuously developed andadapted for manufacturing industries and other specificapplications. It is acknowledged as one of the most important costsaving developments in supply chain management to be offered toindustry.

Its flexibility is one of its key features. It utilises Windows basedsoftware and it has hardware that can be configured to meet theexact needs of the user. VVEENNDDAA 336655 can be used to control a widerange of products, such as tooling, gauges, machine spares, PPEitems, valuable components and documents, basically any itemthat is required instantly from a secure location. It is modular andtherefore available with any drawer configuration, in single frameunits or in multiples of up to 10 frames. Over 2600 systems are nowsuccessfully operational in the United States, Europe, South Africa,China, Japan, Australia and the Middle East.

The patented features coupled with the well proven integratedATMS management software make the vending system unique in its

class. The robust design, system reliability, paperless reordering facilities, management reports and productusage monitoring features are some of the reasons why 84% of customers added extra vending capacitywithin 12 months of operating an initial unit.

The vending machine consists of a storage unit, drawers, cupboards and lockers, a PC (Windows) thatallows storage locations to open electronically.

Product movements are continuously recorded by the in-built PC.

The operator is able to use an optional swipe-card facility to gain access to the system's controlmechanism, and can use a light pen to select the required product and open the specific storage location.

[ the control ]c complete user accountability

o orders for stock replenishment generated automatically

n no squirrelling & hoarding nor walk & wait time

t total control over consumables

r retain control with minimum utilisation of management time

o on-hand management information

l line side replenishment

Page1888

For further details please contact your local distributor.

Product Vending & Inventory Control

monitoring

[ the products ]

securing

[ the valuables ]

working in

[ industry ]

[ food processing ]

[ aerospace ]

[ automotive ]

[ manufacturing ]

[ pharmaceutical ]

[ electronics ]

Page1889


PRODUCT VENDING & INVENTORY CONTROLSe

rvice &

Support

SUPPLY SYSTEMSPPE-365 VENDING

MACHINESAVE TIME & MONEY - TAKE CONTROL! “Stock availability kept the

production line running,saving us £37,400 in stoppage costs and

improving productivity by 9%!” during 2006.

Medical & Healthcare Manufacturers,

South East England.

“We saved 23% of our PPE spend

following the introduction of PPE-365 systems!”

Casting Company, Sheffield.

PPE-365 is a low cost, fully featured control solution to manage and audit allof your company’s Personal Protection Equipment 365 days a year.

� Product availability could reduce levels of exposure to injury and liability to insurance claims.

� Complete audit trails - know who, when, where and why!

� Fast, simple system administration. � Extensive user configurable reporting.

� Comprehensive automated reordering functionality.

SINGLEBAY

DOUBLEBAY

All PPE-365 machines are fully compatible withVENDA-365 and MEDI-365 systems.

Add-on machines can be ordered individually to attach to existing systems.

MACHINES

Unique, single-drawer accesscontrol system, ensures

operators can quickly locateand obtain their required items

- without compromising thesecurity of items contained in

other drawers.

Authorised access security viaa simple ‘touch screen’

user interface.

AVAILABILITY • ACCOUNTABILITY • CONTROL

PRODUCT VENDING & INVENTORY CONTROL


Serv

ice &

Support


AVAILABLE FOR:

• CONDENSED DRAWER CONFIGURATION• INCREASE CAPACITY BY 40%

• UP TO 28 LEVELS OF DRAWERS• IDEAL FOR SMALL PARTS

• FOR MULTIPLE INDUSTRIESOPTI-VEND – The concept is arguably one of the most important technological advancements in vendingmachine thinking and construction for many years and puts wishes in to reality, the OPTI-VENDconfiguration is the most condensed drawer configuration available in any vending machine on themarket today.

OPTI-VEND gives you the advantage of optimising each unit to givemore than a 40% increase in capacity on most standard machines,therefore maximising your storage space and capability. Ideal forsmall parts inventory management in multiple industries, the likelyapplications vary from dispensing pharmaceuticals to line-sidevending of automotive spares.

The innovative design is unique in its class and will undoubtedlypave the way for the standards of the future, VENDA 365 are nowable to produce machines with up to a maximum of 28 levels ofdrawer and where suitable a miniature touch screen.

Tomorrow’s technology is here today and the OPTI-VENDconfiguration is available to order in the Medi 365 and PPE 365variation as well as standard VENDA 365.

FEATURES:• Unique easy to use front access manual override mechanism

• Reduced Cost per location

• Unique and easy to reconfigure vending units

• Higher density storage in same footprint

• Future-proof USB interface

• Maximum of 104 locations on main frame

• Maximum of 113 locations per add on frame, including anelectronically controlled top cupboard

• Compatible with all existing VENDA 365 systems

• Incorporates system expansion port for future use with RFID andother ancillary equipment

• Built-in tray diagnostic port, facilitating improved remote systemsupport

• Improved system robustness & reliability

OPTI-VENDTM

HIGH CAPACITY VENDING



rvice &

Support

AVAILABLE FOR:

CAPS-VENDTM

CAP AND PARTITIONS MODULE• 24/7 ITEM AVAILABILITY AND CONTROL

• UP TO 432 SECURE LOCATIONS PER MODULE• FLEXIBLE STORAGE CAPACITY

• HIGH SPEED ACCESS• FULL SUPPORT FOR VENDA 365 FUNCTIONALITY

Developed with our industry leading, award winning technology, the CAPS-VEND inventory controlmodule provides a cost effective management methodology, for control of all your critical andconsumable inventory.

Fully compatible with the industry-leading VENDA 365 Inventory Management System, CAPS-VENDmodules may be used to expand the capacity of existing systems, or can operate as a standalonedispensing solution. With its flexible, configurable, modular design CAPS-VEND is ideally suited for thecontrol and management of:

• PPE

• Cutting Tools

• Fasteners & Fixings

• Critical Spare Parts

• Hand & Power Tools

• Office Consumables

and much more...

CAPS-VEND PROVIDES A SCALABLE, COST EFFECTIVE SOLUTION FOR THESECURE MANAGEMENT OF A WIDE RANGE OF HIGH AND LOW USAGE ITEMSCAPS-VEND Modules incorporate a number of unique features & advantages including:

• Full integration with the VENDA 365 complete software suite.

• 24/7 operation 365 days per year.

• High Configurability

• Fast item dispensing and return, with total security

• Easy integration with new or existing VENDA 365 installations

• Expandable up-to 10 CAPS-VEND Modules per system.

• Fast, easy and secure manual override system ensures access to items during power-outages

• High-Security, automatic locking action

• Reliable & robust industrial construction

• Class leading storage efficiency

CAPS-VEND modules can be specified to meet your exact requirements and are available in a number of standard configurations.

(Subject to availability).




Serv

ice &

Support

AVAILABLE FOR:

ROTA-VENDTM

LOW COST SECURE ITEM MANAGEMENT

Total Locations

Door Size

Type 1

36

32 x 35

12.6 x 13.8

cm

ins

Type 2

90

16 x 26

6.3 x 10.2

Type 3

180

8 x 26

3.1 x 10.2

Type 4

126

16 x 17.5

6.3 x 6.9

Type 5

252

8 x 17.5

3.1 x 6.9

Type 6

468

8 x 8

3.1 x 3.1

• RAPID PAYBACK• CONFIGURABLE STORAGE CAPACITY

• HIGH SPEED 24/7 ACCESS• MAXIMUM SECURITY RETURNS CAPABILITY

• UP TO 468 SECURE LOCATIONS WITHINDIVIDUAL ACCESS CONTROL

ROTO-VEND Provides a low cost solution for the securemanagement of large numbers of individual items.Developed with our industry leading, award winning technology, ROTO-VEND provides a cost effective, 24/7 solution for inventory control at the point ofuse. ROTO-VEND is ideal for managing all your inventory requirements including:

• PPE

• Critical Spare Parts

• Documentation

• Cutting Tools

• Hand & Power Tools

• Fasteners and Fixings

...and many more applications.

IN CONJUNCTION WITH THE VENDA 365 INVENTORY MANAGEMENT SOLUTION, ROTO-VEND PROVIDES A SCALABLE, COST EFFECTIVE SOLUTION FOR THESECURE MANAGEMENT OF A WIDE RANGE OF HIGH AND LOW USAGE ITEMS.

ROTO-VEND provides a number of advantages including:

• Full integration with the VENDA 365 software suite.

• Rapid item dispensing and return, with total security

• Fast integration with new or existing VENDA 365 installations

• Expansion of up to 10 ROTO-VEND units per system.

• Manual override system to ensuring item access during electrical power outages

• Reliable & robust industrialised construction

• 24/7 operation 365 days per year.

ROTO-VEND can be customised to meet your exact requirementsand is available in a number of standard configurations.




rvice &

Support

AVAILABLE FOR:

LOCKER-VENDTM

SECURE STORAGE FOR BULKIER ITEMS • ADDED FLEXIBILITY

• SECURE STORAGE FOR BULKIER ITEMS• ELECTRONICALLY CONTROLLED DOORS

• UP TO 75kg CAPACITY PER LOCKER• UP TO 14 UNITS PER VENDA 365 MACHINE

The addition of locker units to Venda 365 Vending Machines provides agreater degree of flexibility than might otherwise be possible withdrawers. Like cupboards, lockers have doors that are electronicallycontrolled, securing storage for bulkier items. Unlike cupboards, whichtake the place of traditional drawer trays, locker units take the place offrames. You can connect up to 14 locker units to a Vending machine.

Lockers are shipped in self-contained units that connect to the VendingMachine. They are configured in stacks, each stack being a verticalcolumn of lockers. Each locker unit consists of three such stacks. Thereare four different stacks available and they can be combined into fivedifferent locker units. The footprint for each of these units is 2000mm(78.7in) wide by 510mm. (20.1in) deep. Each locker is capable of holding up to 75 kg (165 lbs.).

Also available to order with viewing windows as illustrated below.




Serv

ice &

Support

Automated Control 24/7MEDI 365 is an Automated Control System, which allowsyou to control, dispense and manage inventory in A&EDepartments, Pharmacy, Theatres and Wards withcomplete accuracy, control and security 24 hours a day, 7days a week 52 weeks a year. This easy to use, totallyflexible and well proven system provides a highly effectivesolution to medicines, inventory and supplies management.

MEDI365

Automated

Secure Dispensary

User Accountability

Information

Patient Traceability

Theatre Companion

Why MEDI 365?Current storage facilities for medicines and supplies in hospitals are antiquatedand basically have changed little over the past thirty years. Processes forordering and supply are inefficient and labour intensive. There are manyoperational and logistical difficulties in dispensing medicines for a wide range ofusage within the hospital. Access to medicine cupboards is usually keycontrolled and is a continual source of delay. Audit trails are inadequate.

There is much anecdotal evidence to suggest that automation within thepharmacy helps pharmacy staff deliver better services to both patients and otherhealthcare professionals and result in genuine cost savings being made.

Fully controlled secure operator access via optional Pin /Password/SecurityCard and/or Fingerprint Verification.

Optional features enable you to produce a full detailed audit report showingusage by identified analysis fields such as User, Ward, Patient, Medicine, BatchNumber and Department. Every transaction is captured and the details of whodispensed what, when, how many and where used are available ‘real-time’.

Marked reduction in dose acquisition time - no keys, and stock easy to locateand less likely to be out of stock. High end-user satisfaction - nursing andmedical staff have very positive opinions of the units. Better stock management- reduction in returns and stock levels and therefore expenditure on medicines.Time saved counting and date checking stocks. Better utilisation of staff -nursing staff released to clinical care.

• An effective solution to poor medicines management • Stock managed effectively in relation to demand - not restricted to the

day of the week• Tried and tested technology successfully adapted to NHS needs• Still clinically immature• Potential for other areas

“Secure, Easy to use, Flexible, Accountable, Cost Effective”“Reduced Inventory - Global Visibility” - “Enhanced and Improved Patient Care”

The patented features coupled with the well-proven integrated MEDI 365management software makes this Award winning Dispensing system unique in its class.

Controlled, quick, secure and easy access to the system ensures improved andaccurate management of drugs, medicines, supplies etc.

Secure Access toAuthorised

Personnel only.

Fast, Easy andAccurate Restock

Procedures.

Single Dose and Full PackDispensing

Control.

Full Inventory ControlFIFO - for Expiry Dates.

TTO Packs.Flexible, AuthorisedRestricted Access.

“The Future inAutomatedDispensingSystems &Inventory

Management”




rvice &

Support

24/7 CUSTOMER SUPPORT LINE

�0116 2572 365

Call us today and take controlof your Tooling Inventory!

Low Cost SolutionsFor controlling products such as:

Cutting Tools, PPE & MRO (Maintenance, Repair & Overhaul)

toolvendSUPPLY SYSTEMS



Serv

ice &

Support

toolvendSUPPLY SYSTEMS

Simple, Low Cost SolutionsThere are 5 levels of cost savingassociated with our 24/7 securedispensers…

1 Operators do not need to seekauthorisation to issue tools fromconventional manned stores areasand incur time away from production

2 Reduction of stock and eliminationof build up of slow moving orobsolete stock

3 Elimination of unauthorisedwithdrawals resulting in trackingand location problems

4 Lower purchasing administration costs

5 Elimination of operatives creatingpersonal hoards of tooling, oftenresulting in denial of productioncritical items to other shifts,operators and departments

Features & Benefits• Secure 24/7 availability

• Elimination of unauthorised retrievals

• Value added service

• Point-of-use convenience

• Increases stock accuracy

• Reduction in stock-level administration

• Flexible Toolvend lease finance

• Optional cost centre allocationvia either keypad or barcode reader

• Reduces production down-time of retrieving and searching for tools

• Generates three distinct audit management reports

Take control of your Tooling Inventory!

Management InformationAll machine transactions are accuratelyrecorded and held within the TVMS cardreader.The transactions are subsequentlydownloaded by dialing up to the Toolvendunit from the local branch.The captured information is then used toprovide reports.The toolvend Operator Audit report detailsall transaction activity and identifies theoperators via their unique authorisationsmart cards - very similar to the philosophyof the banking cash point card.

This information then enables tool usage tobe attributable to either the operator, cell,machine or component.The toolvend Product Audit report providesall transaction data of tool issues enablingeasy and accurate replenishment of themachine. This report can also assist withthe invoicing of products issued from themachine.

service & support - techmar & support contents ... up to 63mm shank - 38mm insert cartridge...

Documents