session 4 -...
TRANSCRIPT
![Page 1: Session 4 - assistinternational.orgassistinternational.org/wp-content/uploads/2020/05/Session-4-Patient-Monitors...Session 4 COVID-19 Preparation for Biomedical Professionals Patient](https://reader034.vdocuments.net/reader034/viewer/2022042622/5f8020e535e36323102e1503/html5/thumbnails/1.jpg)
Session 4
COVID-19 Preparation for Biomedical Professionals
Patient Monitors & Pulse Oximetry
![Page 2: Session 4 - assistinternational.orgassistinternational.org/wp-content/uploads/2020/05/Session-4-Patient-Monitors...Session 4 COVID-19 Preparation for Biomedical Professionals Patient](https://reader034.vdocuments.net/reader034/viewer/2022042622/5f8020e535e36323102e1503/html5/thumbnails/2.jpg)
Please Note:© Copyright. Assist International. 2020. All rights reserved. Reproducing and distributing this material without the written permission of Assist International is prohibited.
![Page 3: Session 4 - assistinternational.orgassistinternational.org/wp-content/uploads/2020/05/Session-4-Patient-Monitors...Session 4 COVID-19 Preparation for Biomedical Professionals Patient](https://reader034.vdocuments.net/reader034/viewer/2022042622/5f8020e535e36323102e1503/html5/thumbnails/3.jpg)
ECHO Etiquette
• Foundation of love and respect - respond kindly rather than react if you disagree
• It is everybody’s responsibility to keep ECHO a safe space
• Test your equipment ahead of time
• Mute your microphone when not speaking
• Bottom left corner of your screen
• Remember to unmute before speaking
• Introduce yourself before speaking
• Speak clearly, and stay close to your microphone
• IT issues? Send a message through chat/email.
![Page 4: Session 4 - assistinternational.orgassistinternational.org/wp-content/uploads/2020/05/Session-4-Patient-Monitors...Session 4 COVID-19 Preparation for Biomedical Professionals Patient](https://reader034.vdocuments.net/reader034/viewer/2022042622/5f8020e535e36323102e1503/html5/thumbnails/4.jpg)
Agenda
Time Allotted Topic Presenter
30 minutes Didactic – Patient Monitors Dr. Masreshaw/Guna
15 minutes Preventive Maintenance on Patient Monitors Benedicto
10 minutes Discussion All
![Page 5: Session 4 - assistinternational.orgassistinternational.org/wp-content/uploads/2020/05/Session-4-Patient-Monitors...Session 4 COVID-19 Preparation for Biomedical Professionals Patient](https://reader034.vdocuments.net/reader034/viewer/2022042622/5f8020e535e36323102e1503/html5/thumbnails/5.jpg)
What’s so dangerous about COVID-19?The virus is stable for long periods of time on surfaces and in aerosols. According to
a study from experts at the National Institute of Health, the Center for Disease
Control, UCLA, and Princeton University the virus is detectable:
• In aerosols for up to 3 Hours
• On copper for up to 4 Hours
• On cardboard for up to 24 Hours
• On plastic and stainless steel for up to 3 Days
https://www.nih.gov/news-events/news-releases/new-coronavirus-stable-hours-surfaces
Session 1 Summary
![Page 6: Session 4 - assistinternational.orgassistinternational.org/wp-content/uploads/2020/05/Session-4-Patient-Monitors...Session 4 COVID-19 Preparation for Biomedical Professionals Patient](https://reader034.vdocuments.net/reader034/viewer/2022042622/5f8020e535e36323102e1503/html5/thumbnails/6.jpg)
PPEs needed include:
• Single use gloves
• Disposable or washable gowns
• Single use caps/hats
• Single use shoe covers
• N95 Respirators
• Eye goggles/face shields
High level disinfectants use products that include one of the following:
• 2% glutaraldehyde
• 6% hydrogen peroxide
• 0.2% peracetic acid
• 7% accelerated hydrogen peroxide
• 0.55% ortho-phthalaldehyde (OPA)
https://www.who.int/emergencies/diseases/novel-coronavirus-2019/technical-guidance/infection-prevention-and-control
Session 1 Summary
How do we keep our hospitals and equipment virus-free?
GLOVES AND PPEs DO NOT REPLACE HAND HYGEINE
![Page 7: Session 4 - assistinternational.orgassistinternational.org/wp-content/uploads/2020/05/Session-4-Patient-Monitors...Session 4 COVID-19 Preparation for Biomedical Professionals Patient](https://reader034.vdocuments.net/reader034/viewer/2022042622/5f8020e535e36323102e1503/html5/thumbnails/7.jpg)
1. EVERYONE should practice basic hygiene and social distancing.
2. In hospital settings, CLINICIANS and BIOMEDICAL PROFESSIONALS should
adopt the following, in addition to standard procedures:
• Increased frequency of basic hygiene like handwashing
• Increased use of personal protective equipment to protect against droplet and airborne infections, such as respirators and face masks
• Increased frequency of equipment disinfection
3. The virus can last up to three days on some surfaces, so be sure to use
proper disinfectants (as recommended by the CDC or WHO) and to
autoclave materials at high enough temperatures/for long enough.
Session 1 Summary
![Page 8: Session 4 - assistinternational.orgassistinternational.org/wp-content/uploads/2020/05/Session-4-Patient-Monitors...Session 4 COVID-19 Preparation for Biomedical Professionals Patient](https://reader034.vdocuments.net/reader034/viewer/2022042622/5f8020e535e36323102e1503/html5/thumbnails/8.jpg)
Resources
• For more information about the specifications for equipment/PPE needed to manage cases of COVID 19, see the WHO Operational Support & Logistics Disease Commodity Packages, COVID-19 v4, Updated March 6, 2020• https://reliefweb.int/sites/reliefweb.int/files/resources/WHO-2019-nCoV-
DCPv3-2020.4-eng.pdf
![Page 9: Session 4 - assistinternational.orgassistinternational.org/wp-content/uploads/2020/05/Session-4-Patient-Monitors...Session 4 COVID-19 Preparation for Biomedical Professionals Patient](https://reader034.vdocuments.net/reader034/viewer/2022042622/5f8020e535e36323102e1503/html5/thumbnails/9.jpg)
ObjectivesBy the end of this refresher module, the participants will recollect:
• How to perform preventive maintenance
• Basic troubleshooting and maintenance for patient monitors
• Proper disinfection of equipment between patients
Clinical attachment yields better experience for trainees to train other BMETs in the future.
![Page 10: Session 4 - assistinternational.orgassistinternational.org/wp-content/uploads/2020/05/Session-4-Patient-Monitors...Session 4 COVID-19 Preparation for Biomedical Professionals Patient](https://reader034.vdocuments.net/reader034/viewer/2022042622/5f8020e535e36323102e1503/html5/thumbnails/10.jpg)
Patient MonitorsINTRODUCTION
![Page 11: Session 4 - assistinternational.orgassistinternational.org/wp-content/uploads/2020/05/Session-4-Patient-Monitors...Session 4 COVID-19 Preparation for Biomedical Professionals Patient](https://reader034.vdocuments.net/reader034/viewer/2022042622/5f8020e535e36323102e1503/html5/thumbnails/11.jpg)
• Electrocardiography (ECG)(EKG)
• Heart rate (HR), pulse rate,
• Non/invasive blood pressure (NIBP,IBP)
• Oxygen saturation,
• Respiration, capnography (EtCO2 and InCO2)
• Temperature
Patient Monitors; medical devices that measure physiological parameters including:
![Page 12: Session 4 - assistinternational.orgassistinternational.org/wp-content/uploads/2020/05/Session-4-Patient-Monitors...Session 4 COVID-19 Preparation for Biomedical Professionals Patient](https://reader034.vdocuments.net/reader034/viewer/2022042622/5f8020e535e36323102e1503/html5/thumbnails/12.jpg)
Patient Monitor Specification
General
• 12.1″ color TFT display
• Suitable for adult, pediatric and neonatal patient
• Multiple parameters: ECG, NIBP, Pulse Rate/SpO2,
• Temperature, Respiration, CO2(Optional)
• Audible and visual alarms with adjustable alarm ranges
• Networkable with central monitoring system
• Preconfigurable patient settings
![Page 13: Session 4 - assistinternational.orgassistinternational.org/wp-content/uploads/2020/05/Session-4-Patient-Monitors...Session 4 COVID-19 Preparation for Biomedical Professionals Patient](https://reader034.vdocuments.net/reader034/viewer/2022042622/5f8020e535e36323102e1503/html5/thumbnails/13.jpg)
Patient Monitor Specification
ECG
• ECG Input: 5- or 3-lead ECG cable
• ECG Lead: I, II, III, aVR, aVL, aVF, V
• Gain Choice: X1/4,X1/2,X1,X2,X4 and Auto
• Scanning Speed (mm/sec): 6.25, 12.5, 25, 50
• Heart Rate Range: 15-380BPM
• ECG Calibration: 1mV
• Frequency Response: 0.05-100Hz
• Heart Rate Accuracy: ±1%
![Page 14: Session 4 - assistinternational.orgassistinternational.org/wp-content/uploads/2020/05/Session-4-Patient-Monitors...Session 4 COVID-19 Preparation for Biomedical Professionals Patient](https://reader034.vdocuments.net/reader034/viewer/2022042622/5f8020e535e36323102e1503/html5/thumbnails/14.jpg)
Patient Monitor Specification
NIBP
• Measurement Method: Automatic Oscillometric
• Patient Types: Adults/Paediatrics/Neonate
• Measurement Parameters: Systolic, Mean, Diastolic
• Measurement Range: 10-300mmHg
• Units of Measurement: mmHg/Kpa
• Accuracy: ±2mmHg
![Page 15: Session 4 - assistinternational.orgassistinternational.org/wp-content/uploads/2020/05/Session-4-Patient-Monitors...Session 4 COVID-19 Preparation for Biomedical Professionals Patient](https://reader034.vdocuments.net/reader034/viewer/2022042622/5f8020e535e36323102e1503/html5/thumbnails/15.jpg)
Pulse Rate/SpO2
• Display: Waveforms and Digits
• Measurement Range: 70-100%
• Resolution: 1%
• Pulse Rate Range: 30-240BPM
• Accuracy: ±2%
• Resolution: 1BPM
Patient Monitor Specification
![Page 16: Session 4 - assistinternational.orgassistinternational.org/wp-content/uploads/2020/05/Session-4-Patient-Monitors...Session 4 COVID-19 Preparation for Biomedical Professionals Patient](https://reader034.vdocuments.net/reader034/viewer/2022042622/5f8020e535e36323102e1503/html5/thumbnails/16.jpg)
Patient Monitor Specification
Temperature
• Measurement range: 25.0-45.0°C
• Display: T1, T2, ΔT
• Accuracy: ±0.1°C
![Page 17: Session 4 - assistinternational.orgassistinternational.org/wp-content/uploads/2020/05/Session-4-Patient-Monitors...Session 4 COVID-19 Preparation for Biomedical Professionals Patient](https://reader034.vdocuments.net/reader034/viewer/2022042622/5f8020e535e36323102e1503/html5/thumbnails/17.jpg)
Patient Monitor Specification
Respiration
• Thoracic Impedance or Nasal Tube (Selectable)
• Measurement Range: 0-120BPM
• Accuracy: ±1BPM
• Resolution: 1BPM
CO2(Optional)
• Measurement Type: Main Stream or Side Stream
• Measurement Range: 0%-10.0%
• Accuracy: ±2mmHg
Power Requirements
• 100-250VAC, 50/60 Hz
![Page 18: Session 4 - assistinternational.orgassistinternational.org/wp-content/uploads/2020/05/Session-4-Patient-Monitors...Session 4 COVID-19 Preparation for Biomedical Professionals Patient](https://reader034.vdocuments.net/reader034/viewer/2022042622/5f8020e535e36323102e1503/html5/thumbnails/18.jpg)
Configuration
Standard
• ECG, HR, NIBP, SpO2, RESP, TEMP, Drug-concentration
• calculation, ST-segment detection, pace-maker analysis and
• arrhythmia analysis, build-in rechargeable battery
Optional
• ETCO2, build-in printer, 2-IBP (Dual invasive blood pressure),
• wall mount, monitor trolley
![Page 19: Session 4 - assistinternational.orgassistinternational.org/wp-content/uploads/2020/05/Session-4-Patient-Monitors...Session 4 COVID-19 Preparation for Biomedical Professionals Patient](https://reader034.vdocuments.net/reader034/viewer/2022042622/5f8020e535e36323102e1503/html5/thumbnails/19.jpg)
Patient MonitorsMAIN PARTS & THEIR FUNCTION
![Page 20: Session 4 - assistinternational.orgassistinternational.org/wp-content/uploads/2020/05/Session-4-Patient-Monitors...Session 4 COVID-19 Preparation for Biomedical Professionals Patient](https://reader034.vdocuments.net/reader034/viewer/2022042622/5f8020e535e36323102e1503/html5/thumbnails/20.jpg)
ECG
• ECG (electrocardiogram) is a recorded waveform of the electrical activity by the heart contraction/expand and displayed in EKG or ECG
• The electrical activity potential, in case of Heart muscle contraction/relaxation, occurs the flow of electricity spread to all over the body
• The flow of electricity, depending on the location of the body, causes potential difference, which can be recorded by the skin surface electrodes attached on the body
![Page 21: Session 4 - assistinternational.orgassistinternational.org/wp-content/uploads/2020/05/Session-4-Patient-Monitors...Session 4 COVID-19 Preparation for Biomedical Professionals Patient](https://reader034.vdocuments.net/reader034/viewer/2022042622/5f8020e535e36323102e1503/html5/thumbnails/21.jpg)
ECG
![Page 22: Session 4 - assistinternational.orgassistinternational.org/wp-content/uploads/2020/05/Session-4-Patient-Monitors...Session 4 COVID-19 Preparation for Biomedical Professionals Patient](https://reader034.vdocuments.net/reader034/viewer/2022042622/5f8020e535e36323102e1503/html5/thumbnails/22.jpg)
QRS Complex
![Page 23: Session 4 - assistinternational.orgassistinternational.org/wp-content/uploads/2020/05/Session-4-Patient-Monitors...Session 4 COVID-19 Preparation for Biomedical Professionals Patient](https://reader034.vdocuments.net/reader034/viewer/2022042622/5f8020e535e36323102e1503/html5/thumbnails/23.jpg)
Einthoven’s Triangle
![Page 24: Session 4 - assistinternational.orgassistinternational.org/wp-content/uploads/2020/05/Session-4-Patient-Monitors...Session 4 COVID-19 Preparation for Biomedical Professionals Patient](https://reader034.vdocuments.net/reader034/viewer/2022042622/5f8020e535e36323102e1503/html5/thumbnails/24.jpg)
Standard Electrode Placement
- White (red) (RA) The River at the center of a right collarbone near the shoulder.- Black (yellow) (LA) adjacent to the middle of the clavicle near the shoulder.- Red (green) (LL) to the lower front ribs.
![Page 25: Session 4 - assistinternational.orgassistinternational.org/wp-content/uploads/2020/05/Session-4-Patient-Monitors...Session 4 COVID-19 Preparation for Biomedical Professionals Patient](https://reader034.vdocuments.net/reader034/viewer/2022042622/5f8020e535e36323102e1503/html5/thumbnails/25.jpg)
ECG Color Code
![Page 26: Session 4 - assistinternational.orgassistinternational.org/wp-content/uploads/2020/05/Session-4-Patient-Monitors...Session 4 COVID-19 Preparation for Biomedical Professionals Patient](https://reader034.vdocuments.net/reader034/viewer/2022042622/5f8020e535e36323102e1503/html5/thumbnails/26.jpg)
IA
HPF1 st
orderAmp
LPF2nd
order
RL Driver
LA
RL
Out put Signal ECG
Display
RA
Patient
ECG Block Diagram:
![Page 27: Session 4 - assistinternational.orgassistinternational.org/wp-content/uploads/2020/05/Session-4-Patient-Monitors...Session 4 COVID-19 Preparation for Biomedical Professionals Patient](https://reader034.vdocuments.net/reader034/viewer/2022042622/5f8020e535e36323102e1503/html5/thumbnails/27.jpg)
Understanding The ECG Display
Current heart rateHeart rate alarm limit
Lead 2
![Page 28: Session 4 - assistinternational.orgassistinternational.org/wp-content/uploads/2020/05/Session-4-Patient-Monitors...Session 4 COVID-19 Preparation for Biomedical Professionals Patient](https://reader034.vdocuments.net/reader034/viewer/2022042622/5f8020e535e36323102e1503/html5/thumbnails/28.jpg)
Monitoring ECG
Prepare skin of Patient for Monitoring ECG
1. If the patient has hair at that where we stick electrode, you should remove it clean or scrub.
2. Cleaning the area with soap and water
3. Dry the area
4. Prepare the electrode: • Is it expired?
• Each electrode should be swapped out every 24 hours.
5. Connect the electrode to the patient
6. When you connect electrode stick from one side to other side opposite from side to in side
![Page 29: Session 4 - assistinternational.orgassistinternational.org/wp-content/uploads/2020/05/Session-4-Patient-Monitors...Session 4 COVID-19 Preparation for Biomedical Professionals Patient](https://reader034.vdocuments.net/reader034/viewer/2022042622/5f8020e535e36323102e1503/html5/thumbnails/29.jpg)
– By using electrodes, the resistance value of skin, during breathing, is represented by figures, with ECG
– EtCo2 can calculate the respiratory rate by driving out carbon dioxide generated
– Done during respiration, which is a little more precise way than the ECG
Respiration & Capnography
![Page 30: Session 4 - assistinternational.orgassistinternational.org/wp-content/uploads/2020/05/Session-4-Patient-Monitors...Session 4 COVID-19 Preparation for Biomedical Professionals Patient](https://reader034.vdocuments.net/reader034/viewer/2022042622/5f8020e535e36323102e1503/html5/thumbnails/30.jpg)
Respiration Circuit Electrical Model
![Page 31: Session 4 - assistinternational.orgassistinternational.org/wp-content/uploads/2020/05/Session-4-Patient-Monitors...Session 4 COVID-19 Preparation for Biomedical Professionals Patient](https://reader034.vdocuments.net/reader034/viewer/2022042622/5f8020e535e36323102e1503/html5/thumbnails/31.jpg)
Temperature
• It is displayed based on the temperature tale in accordance with EXACON's resistance
• After converting heat applied on the temp sensor to the value of the heat resistance
• Rectal TEMP sensor (insert to Rectum) is supplied as standard, & SKIN TEMP sensor is optional
![Page 32: Session 4 - assistinternational.orgassistinternational.org/wp-content/uploads/2020/05/Session-4-Patient-Monitors...Session 4 COVID-19 Preparation for Biomedical Professionals Patient](https://reader034.vdocuments.net/reader034/viewer/2022042622/5f8020e535e36323102e1503/html5/thumbnails/32.jpg)
Blood Pressure
• Invasive Blood Pressure: Blood Pressure measurement by inserting a catheter in the arteries
• Non-Invasive Blood Pressure : In general, swathe cuff the artery of upper limbs or lower limbs and apply pressure, once block the blood flow.
• Gradually release air pressure of cuff. When the blood flow is resumed.• To measure artery occlusion pressure by vortex of blood
• The above method commonly used in hospitals is same to the mercury sphygmomanometer
(manual) methods
![Page 33: Session 4 - assistinternational.orgassistinternational.org/wp-content/uploads/2020/05/Session-4-Patient-Monitors...Session 4 COVID-19 Preparation for Biomedical Professionals Patient](https://reader034.vdocuments.net/reader034/viewer/2022042622/5f8020e535e36323102e1503/html5/thumbnails/33.jpg)
SpO2(Pulse Oximeter Saturation)
• The measurement of blood oxygen saturation concentration can be gotten by non-invasive blood way as like attaching SpO2 sensor on the finger or ear. And measures the percent of hemoglobin combined with oxygen in the blood
• By flashing alternately RED and IR(infrared light) of Oxygen saturation sensor, they permeate the finger capillary and the light of a specific area permeated has a constant absorption coefficient against the blood in the capillary, and is absorbed proportionally to the concentration of the blood.
• Permeated light is detected by an optical sensor on the other side and detected in the way of Voltage
HbO2
Hb
Wavelength (nm)
Ab
sorp
tio
n
660 800 940
RedInfra-red
Isobesticpoint
![Page 34: Session 4 - assistinternational.orgassistinternational.org/wp-content/uploads/2020/05/Session-4-Patient-Monitors...Session 4 COVID-19 Preparation for Biomedical Professionals Patient](https://reader034.vdocuments.net/reader034/viewer/2022042622/5f8020e535e36323102e1503/html5/thumbnails/34.jpg)
Pulse Oximeter
• Similar to SpO2 function in patient monitor.
• Stand alone unit.
![Page 35: Session 4 - assistinternational.orgassistinternational.org/wp-content/uploads/2020/05/Session-4-Patient-Monitors...Session 4 COVID-19 Preparation for Biomedical Professionals Patient](https://reader034.vdocuments.net/reader034/viewer/2022042622/5f8020e535e36323102e1503/html5/thumbnails/35.jpg)
Measuring SpO2• Pulse oximetry:
• noninvasive monitoring technique
• estimates the measurement of arterial oxygen saturation (SpO2) of hemoglobin.
• Oxygen saturation is an indicator of the percentage of hemoglobin saturated with oxygen at the time of the measurement.
• The device uses a light sensor containing two sources of light (red and infrared) that are absorbed by hemoglobin and transmitted through tissues to a photo detector
• The amount of light transmitted through the tissue is then converted to a digital value representing the percentage of hemoglobin saturated with oxygen
![Page 36: Session 4 - assistinternational.orgassistinternational.org/wp-content/uploads/2020/05/Session-4-Patient-Monitors...Session 4 COVID-19 Preparation for Biomedical Professionals Patient](https://reader034.vdocuments.net/reader034/viewer/2022042622/5f8020e535e36323102e1503/html5/thumbnails/36.jpg)
Position Input (SpO2 Sensor)
![Page 37: Session 4 - assistinternational.orgassistinternational.org/wp-content/uploads/2020/05/Session-4-Patient-Monitors...Session 4 COVID-19 Preparation for Biomedical Professionals Patient](https://reader034.vdocuments.net/reader034/viewer/2022042622/5f8020e535e36323102e1503/html5/thumbnails/37.jpg)
Patient MonitorsWORKING PRINCIPLES
![Page 38: Session 4 - assistinternational.orgassistinternational.org/wp-content/uploads/2020/05/Session-4-Patient-Monitors...Session 4 COVID-19 Preparation for Biomedical Professionals Patient](https://reader034.vdocuments.net/reader034/viewer/2022042622/5f8020e535e36323102e1503/html5/thumbnails/38.jpg)
Patient Monitor OverviewFront Panel Controls and Connectors: Key by Number:
![Page 39: Session 4 - assistinternational.orgassistinternational.org/wp-content/uploads/2020/05/Session-4-Patient-Monitors...Session 4 COVID-19 Preparation for Biomedical Professionals Patient](https://reader034.vdocuments.net/reader034/viewer/2022042622/5f8020e535e36323102e1503/html5/thumbnails/39.jpg)
Patient Monitor Overview
Rear Panel Component: Key By Number:
1. Air ventilation
2. Equipotential terminal
3. AC power connector
4. Speaker
5. Battery cover
6. Thermal Printer(option)
7. Handle
![Page 40: Session 4 - assistinternational.orgassistinternational.org/wp-content/uploads/2020/05/Session-4-Patient-Monitors...Session 4 COVID-19 Preparation for Biomedical Professionals Patient](https://reader034.vdocuments.net/reader034/viewer/2022042622/5f8020e535e36323102e1503/html5/thumbnails/40.jpg)
Patient Monitor Overview
1 . USB port
2. LAN connector
3.RS‐232 interface connector
1.Thermalprinter (option)
2 .Battery cover
Left Panel:Right Panel:
![Page 41: Session 4 - assistinternational.orgassistinternational.org/wp-content/uploads/2020/05/Session-4-Patient-Monitors...Session 4 COVID-19 Preparation for Biomedical Professionals Patient](https://reader034.vdocuments.net/reader034/viewer/2022042622/5f8020e535e36323102e1503/html5/thumbnails/41.jpg)
EtCO2• EtCO2 =End tidal CO2
• The MediCO2, Microstream CO2 module can be fitted onto MATRON.
• Provides the functions of measuring ETCO2, respiratory CO2, and respiration numbers using the small filterline based on a small lumen type filterline.
• In the Microstream CO2 type, the level is measured through the cannula (non-tubing type) attached to the nose or a sampling line equipped in the respiratory circuit (tubing type).
• Automatically changed during EtCO2 measurement.
• After ending the measurement, the device will display the calibrated impedance of chest.
• If MATRON senses proper respiratory movement, it displays EtCO2, FiCO2 and respiration rate after 3 seconds.
• In principle - CO2 absorbs infra-red radiation. A beam of infra-red light is passed across the gas sample to fall on a sensor. The presence of CO2 in the gas leads to a reduction in the amount of light falling on the sensor, which changes the voltage in a circuit
![Page 42: Session 4 - assistinternational.orgassistinternational.org/wp-content/uploads/2020/05/Session-4-Patient-Monitors...Session 4 COVID-19 Preparation for Biomedical Professionals Patient](https://reader034.vdocuments.net/reader034/viewer/2022042622/5f8020e535e36323102e1503/html5/thumbnails/42.jpg)
Connect the temperature sensor to the connection terminal of the measurement module.
Temp 1
Temp 2
Insert temp sensor to the anus.
Temperature
![Page 43: Session 4 - assistinternational.orgassistinternational.org/wp-content/uploads/2020/05/Session-4-Patient-Monitors...Session 4 COVID-19 Preparation for Biomedical Professionals Patient](https://reader034.vdocuments.net/reader034/viewer/2022042622/5f8020e535e36323102e1503/html5/thumbnails/43.jpg)
<- Wrapping the cuff too tight or too loose on the measuring site may cause errors in the value.
To change the setting of NIBP mode, push the Menu button once to select NIBP.
Connect the product with the gray hose as shown below..
By operating as detailed above, you can select each function of the NIBP mode. .
Non Invasive Blood Pressure
![Page 44: Session 4 - assistinternational.orgassistinternational.org/wp-content/uploads/2020/05/Session-4-Patient-Monitors...Session 4 COVID-19 Preparation for Biomedical Professionals Patient](https://reader034.vdocuments.net/reader034/viewer/2022042622/5f8020e535e36323102e1503/html5/thumbnails/44.jpg)
Connect the monitor interface cable to the press connection terminal of the measurement module.
Connecting of the converter interface cable.
The way of changing of IBP1,2 Mode is pushing Menu Button 1 time.
By using above way of changing, Selecting IBP1,2 Mode is available.
Invasive Blood Pressure
![Page 45: Session 4 - assistinternational.orgassistinternational.org/wp-content/uploads/2020/05/Session-4-Patient-Monitors...Session 4 COVID-19 Preparation for Biomedical Professionals Patient](https://reader034.vdocuments.net/reader034/viewer/2022042622/5f8020e535e36323102e1503/html5/thumbnails/45.jpg)
Blood Pressure
![Page 46: Session 4 - assistinternational.orgassistinternational.org/wp-content/uploads/2020/05/Session-4-Patient-Monitors...Session 4 COVID-19 Preparation for Biomedical Professionals Patient](https://reader034.vdocuments.net/reader034/viewer/2022042622/5f8020e535e36323102e1503/html5/thumbnails/46.jpg)
Absolute Sensor Gauge/ Differential sensor- Absolute, Vacuum, Sealed
Piezo-resistive Pressure Sensor
- Differential, Gauge
![Page 47: Session 4 - assistinternational.orgassistinternational.org/wp-content/uploads/2020/05/Session-4-Patient-Monitors...Session 4 COVID-19 Preparation for Biomedical Professionals Patient](https://reader034.vdocuments.net/reader034/viewer/2022042622/5f8020e535e36323102e1503/html5/thumbnails/47.jpg)
Fiber Optic Pressure Sensors
![Page 48: Session 4 - assistinternational.orgassistinternational.org/wp-content/uploads/2020/05/Session-4-Patient-Monitors...Session 4 COVID-19 Preparation for Biomedical Professionals Patient](https://reader034.vdocuments.net/reader034/viewer/2022042622/5f8020e535e36323102e1503/html5/thumbnails/48.jpg)
MEMS
MEMS pressure sensors have always provided easy interface to an MCU, reliability, and low cost. New manufacturing processes and designs have reduced their die sizes while enhancing their performance
Jul 1, 2000 By: Gordon Bitko, Randy Frank, Andrew
McNeil Sensors
![Page 49: Session 4 - assistinternational.orgassistinternational.org/wp-content/uploads/2020/05/Session-4-Patient-Monitors...Session 4 COVID-19 Preparation for Biomedical Professionals Patient](https://reader034.vdocuments.net/reader034/viewer/2022042622/5f8020e535e36323102e1503/html5/thumbnails/49.jpg)
Infusion set (Needle)Tube (hose)3 wayHolderTransducer (Membrane sensor, Dome, Diaphragm)
Blood Pressure Accessories
![Page 50: Session 4 - assistinternational.orgassistinternational.org/wp-content/uploads/2020/05/Session-4-Patient-Monitors...Session 4 COVID-19 Preparation for Biomedical Professionals Patient](https://reader034.vdocuments.net/reader034/viewer/2022042622/5f8020e535e36323102e1503/html5/thumbnails/50.jpg)
Patient MonitorsPREVENTIVE MAINTENANCE
![Page 51: Session 4 - assistinternational.orgassistinternational.org/wp-content/uploads/2020/05/Session-4-Patient-Monitors...Session 4 COVID-19 Preparation for Biomedical Professionals Patient](https://reader034.vdocuments.net/reader034/viewer/2022042622/5f8020e535e36323102e1503/html5/thumbnails/51.jpg)
Preventive Maintenance
Why is preventive maintenance important?
• Reduces the risk of injury (to patient, staff or visitors), and adverse impact on patient care
• Decreased equipment life-cycle costs
• Reduces operational difficulties
• Comply with codes, standards and regulations
![Page 52: Session 4 - assistinternational.orgassistinternational.org/wp-content/uploads/2020/05/Session-4-Patient-Monitors...Session 4 COVID-19 Preparation for Biomedical Professionals Patient](https://reader034.vdocuments.net/reader034/viewer/2022042622/5f8020e535e36323102e1503/html5/thumbnails/52.jpg)
Preventive MaintenanceThe PPM (planned preventive maintenance) procedure can be divided into the following tasks:
•Qualitative Task/Physical Inspection• Visible test and Cleaning
• Electrical Safety Test• Verify the electrical safety of the system
•Performance Verification Test• Verify that it performs as per its design parameters.
![Page 53: Session 4 - assistinternational.orgassistinternational.org/wp-content/uploads/2020/05/Session-4-Patient-Monitors...Session 4 COVID-19 Preparation for Biomedical Professionals Patient](https://reader034.vdocuments.net/reader034/viewer/2022042622/5f8020e535e36323102e1503/html5/thumbnails/53.jpg)
Cleaning
For cables, sensors, cuffs, and probes:
• Clean the outer surface of equipment using a soft cloth, dampened with a nonabrasive cleaner
![Page 54: Session 4 - assistinternational.orgassistinternational.org/wp-content/uploads/2020/05/Session-4-Patient-Monitors...Session 4 COVID-19 Preparation for Biomedical Professionals Patient](https://reader034.vdocuments.net/reader034/viewer/2022042622/5f8020e535e36323102e1503/html5/thumbnails/54.jpg)
Safety and Functionality Checks
For Batteries:
• If the monitor has not been used for long period more than two months, the battery should be charged before using.
• If the monitor kept install for more than two months the battery should be removed.
CAUTION: If the battery shows any signs of damage, leakage, or cracking, it must be replaced immediately.
CAUTION: Discarded batteries may explode during incineration. Recycle used batteries properly. Do not dispose of batteries in refuse containers.
![Page 55: Session 4 - assistinternational.orgassistinternational.org/wp-content/uploads/2020/05/Session-4-Patient-Monitors...Session 4 COVID-19 Preparation for Biomedical Professionals Patient](https://reader034.vdocuments.net/reader034/viewer/2022042622/5f8020e535e36323102e1503/html5/thumbnails/55.jpg)
Electrical Safety Test
SFC: Single Fault Condition / RM: Reverse Mains/Lines Voltage
Note: Earth leakage current is measured under various conditions of the AC mains and protective earth conductor. For each condition, the measured leakage current must not exceed that indicated in Table 3.
According to most standards, the safety testy should be done under the following settings:
Protective Earth Continuity This test checks the integrity of the power cord ground wire from the AC plug to the instrument chassis ground. The current used for this test is less than or equal to 4 Volts RMS, 50 to 60 Hz, and 25 Amperes.
Steps:• Connect the monitor AC mains plug to the analyzer
recommended by the analyzer operating instructions. • Connect the analyzer resistance input lead to the
equipotential terminal (ground lug) on the rear of the instrument.
• Verify that the analyzer indicates 100 mΩ or less.
*Device service should ALWAYS include electrical safetytesting and PVT testing.
![Page 56: Session 4 - assistinternational.orgassistinternational.org/wp-content/uploads/2020/05/Session-4-Patient-Monitors...Session 4 COVID-19 Preparation for Biomedical Professionals Patient](https://reader034.vdocuments.net/reader034/viewer/2022042622/5f8020e535e36323102e1503/html5/thumbnails/56.jpg)
Checklist for ESTDescription UOM Set values Measured values Limit/Tolerance
Main Voltage L-N Vac - 10%
Device Current A - -
Earth/Ground wire resistance Ω - <0.3Ω
Insulation test (optional) 500V/250VDC MΩ >2MΩ
Earth Leakage Current
1.Normal Condition uA <500 uA
2. Open Neutral uA <1000 uA
3. Open Neutral- Reversed Mains uA <1000 uA
4. Normal Condition- Reversed Mains uA <500 uA
Enclosure Leakage Current
1. Normal Condition uA <100 uA
2. Open Earth uA <500 uA
3. Open Neutral uA <500 uA
4. Open Neutral- Reversed Mains uA <500 uA
5.Normal Condition- Reversed Mains uA <100 uA
6.Open Earth- Reversed Mains uA <500 uA
Patient Leakage Current (AP)
Lead to earth leakage
1. Normal Condition uA <10CF/100BF/B uA
2. Open Earth uA <50CF/500BF/B uA
3. Open Neutral uA <50CF/500BF/B uA
4. Open Neutral- Reversed Mains uA <50CF/500BF/B uA
5. Normal Condition- Reversed Mains uA <10CF/100BF/B uA
6. Open Earth- Reversed Mains uA <50CF/500BF/B uA
Patient Auxiliary Current (AP)
Lead to Lead leakage
1. Normal Condition uA <10CF/100BF/B uA
2. Open Earth uA <50CF/500BF/B uA
3. Open Neutral uA <50CF/500BF/B uA
4. Open Neutral- Reversed Mains uA <50CF/500BF/B uA
5. Normal Condition- Reversed Mains uA <10CF/100BF/B uA
6. Open Earth- Reversed Mains uA <50CF/500BF/B uA
Mains on Applied Parts (AP)
Lead Isolation Leakage
1. Single Fault Condition-Normal uA <50CF/500BF/B uA
2. Single Fault Condition-Reverse uA <50CF/500BF/B uA
![Page 57: Session 4 - assistinternational.orgassistinternational.org/wp-content/uploads/2020/05/Session-4-Patient-Monitors...Session 4 COVID-19 Preparation for Biomedical Professionals Patient](https://reader034.vdocuments.net/reader034/viewer/2022042622/5f8020e535e36323102e1503/html5/thumbnails/57.jpg)
Electrical Safety Tests
220-240 V
How to Check Ground:
![Page 58: Session 4 - assistinternational.orgassistinternational.org/wp-content/uploads/2020/05/Session-4-Patient-Monitors...Session 4 COVID-19 Preparation for Biomedical Professionals Patient](https://reader034.vdocuments.net/reader034/viewer/2022042622/5f8020e535e36323102e1503/html5/thumbnails/58.jpg)
Performance Tests
• Tests need to be done anytime you service the device or perform maintenance• If the monitor does not pass this test, it should not be returned to the user.
![Page 59: Session 4 - assistinternational.orgassistinternational.org/wp-content/uploads/2020/05/Session-4-Patient-Monitors...Session 4 COVID-19 Preparation for Biomedical Professionals Patient](https://reader034.vdocuments.net/reader034/viewer/2022042622/5f8020e535e36323102e1503/html5/thumbnails/59.jpg)
Test Tools Needed
• Electrical Safety analyzer
• Patient simulatoro ECG/RESP
oNIBP
o IBP
• SpO2 simulator
• Multimeter
![Page 60: Session 4 - assistinternational.orgassistinternational.org/wp-content/uploads/2020/05/Session-4-Patient-Monitors...Session 4 COVID-19 Preparation for Biomedical Professionals Patient](https://reader034.vdocuments.net/reader034/viewer/2022042622/5f8020e535e36323102e1503/html5/thumbnails/60.jpg)
System Tests
• The monitor must be placed in the service menu. For a detailed explanation on how to access the service menu, refer to Service Menu and Factory Default Settings section in the manual
• Rotate the trim knob to select System Test in the service menu, and then press the trim knob.
![Page 61: Session 4 - assistinternational.orgassistinternational.org/wp-content/uploads/2020/05/Session-4-Patient-Monitors...Session 4 COVID-19 Preparation for Biomedical Professionals Patient](https://reader034.vdocuments.net/reader034/viewer/2022042622/5f8020e535e36323102e1503/html5/thumbnails/61.jpg)
Patient Simulator
Parameters should include:
• NIBP
• IBP
• RESP
• ECG
![Page 62: Session 4 - assistinternational.orgassistinternational.org/wp-content/uploads/2020/05/Session-4-Patient-Monitors...Session 4 COVID-19 Preparation for Biomedical Professionals Patient](https://reader034.vdocuments.net/reader034/viewer/2022042622/5f8020e535e36323102e1503/html5/thumbnails/62.jpg)
Patient Simulator: ECG
• ECG connection button type, to simulator ECG output.
![Page 63: Session 4 - assistinternational.orgassistinternational.org/wp-content/uploads/2020/05/Session-4-Patient-Monitors...Session 4 COVID-19 Preparation for Biomedical Professionals Patient](https://reader034.vdocuments.net/reader034/viewer/2022042622/5f8020e535e36323102e1503/html5/thumbnails/63.jpg)
SpO2 Simulator
• SpO2 simulator to simulated the SpO2 unit and verifying test.
![Page 64: Session 4 - assistinternational.orgassistinternational.org/wp-content/uploads/2020/05/Session-4-Patient-Monitors...Session 4 COVID-19 Preparation for Biomedical Professionals Patient](https://reader034.vdocuments.net/reader034/viewer/2022042622/5f8020e535e36323102e1503/html5/thumbnails/64.jpg)
LCD Test
To test the LCD display:
1. Select LCD Test in the system test.
2. The screen color will change over the following sequence every 2 seconds: Red, Green, Blue, White, Black
3. After testing the test, press trim knob twice to exit.
4. This test produces a Pass/Fail result.
5. When the color of the test screen changes in the order from Red, Green, Blue, White to Black, the LCD display is in a normal state.
![Page 65: Session 4 - assistinternational.orgassistinternational.org/wp-content/uploads/2020/05/Session-4-Patient-Monitors...Session 4 COVID-19 Preparation for Biomedical Professionals Patient](https://reader034.vdocuments.net/reader034/viewer/2022042622/5f8020e535e36323102e1503/html5/thumbnails/65.jpg)
Alarm Audible Test
1. Select Alarm Audible Test in the system test.
2. The level of the alarm tone will appear on the screen as the alarm tone sounds. Then, the level goes up gradually.
3. When the tone reaches the maximum level 8, it returns to the minimum level 1.
4. After finishing the test, press the trim knob to select Cancel The menu box will disappear
![Page 66: Session 4 - assistinternational.orgassistinternational.org/wp-content/uploads/2020/05/Session-4-Patient-Monitors...Session 4 COVID-19 Preparation for Biomedical Professionals Patient](https://reader034.vdocuments.net/reader034/viewer/2022042622/5f8020e535e36323102e1503/html5/thumbnails/66.jpg)
Pass/Fail Results1. Select Tone Audible Test in the system test.
2. Rotate the trim knob to select HR/PR Tone.
3. The HR/PR tone sounds intermittently as the level goes up gradually. When the tone reaches the maximum level 7, it returns to the minimum 1. When the tone returns to the minimum, the pitch will change automatically. There are three pitches – High, Med and Low.
4. Press Cancel to finish the test.
5. Rotate the trim knob to select Key Beep.
6. The key beep sounds intermittently as the level goes up gradually. When the tone reaches the maximum level 7, it returns to the minimum 1.
![Page 67: Session 4 - assistinternational.orgassistinternational.org/wp-content/uploads/2020/05/Session-4-Patient-Monitors...Session 4 COVID-19 Preparation for Biomedical Professionals Patient](https://reader034.vdocuments.net/reader034/viewer/2022042622/5f8020e535e36323102e1503/html5/thumbnails/67.jpg)
Battery Check
1. Connect the monitor to an AC power source using the proper power cord
2. Verify that the AC indicator is lit3. Charge the battery until the charging
status indicator is no longer flashing• This takes at least 12 hours
4. To check for a full charge, perform the procedure in “Battery Discharge”
![Page 68: Session 4 - assistinternational.orgassistinternational.org/wp-content/uploads/2020/05/Session-4-Patient-Monitors...Session 4 COVID-19 Preparation for Biomedical Professionals Patient](https://reader034.vdocuments.net/reader034/viewer/2022042622/5f8020e535e36323102e1503/html5/thumbnails/68.jpg)
Performance Test ReportDescription UOM Set values Measured values Limit/Tolerance Pass Fail N/A
1. Temperature Accuracy °C 37.1 ±0. 1 count ( ) ( ) ( )
°C 35.1 ± 0.1 count ( ) ( ) ( )
2. Heart Rate Accuracy (ECG) bpm 70 69 - 71 ( ) ( ) ( )
±1 count bpm 95 94 - 95 ( ) ( ) ( )
bpm 70 69 - 71 ( ) ( ) ( )
3. Respiration Resp/min 20 19 - 21 ( ) ( ) ( )
±1 count Resp/min 40 39 - 41 ( ) ( ) ( )
Resp/min 20 19 - 21 ( ) ( ) ( )
4. SPO2 Accuracy %/bpm 85/80 ±1 count ( ) ( ) ( )
±1 count %/bpm 95/40 ±1 count ( ) ( ) ( )
%/bpm 98/80 ±1 count ( ) ( ) ( )
%/bpm 98/140 ±1 count ( ) ( ) ( )
5. NIBP Pressure relief test mmHg - <330 mmHg ( ) ( ) ( )
5A. Non-invasive Blood
Pressure Accuracy ±6%
mmHg 120/80
Adult
Low 112/75
High 128/85
( ) ( ) ( )
mmHg 70/40
Neo
Low 66/37
High 74/42
( ) ( ) ( )
mmHg 190/120
High
Low 179/113
High 201/127
( ) ( ) ( )
mmHg 80/40
Low
Low75/38
High 89/42
( ) ( ) ( )
6.IBP mmHg 0 0 ( ) ( ) ( )
mmHg 100 99-101 ( ) ( ) ( )
mmHg 200 199-201 ( ) ( ) ( )
mmHg 0 0 ( ) ( ) ( )
7. High Alarm/ Low Alarm - - ECG/RESP/SPO2/NIBP ( ) ( ) ( )
![Page 69: Session 4 - assistinternational.orgassistinternational.org/wp-content/uploads/2020/05/Session-4-Patient-Monitors...Session 4 COVID-19 Preparation for Biomedical Professionals Patient](https://reader034.vdocuments.net/reader034/viewer/2022042622/5f8020e535e36323102e1503/html5/thumbnails/69.jpg)
NIBP Test Modes
Manometer Mode:• Static manometer displays pressures
from -400 to +400 mmHg in 0.1 mmHg steps.
• Can be used for static calibration of NIBP monitors.
![Page 70: Session 4 - assistinternational.orgassistinternational.org/wp-content/uploads/2020/05/Session-4-Patient-Monitors...Session 4 COVID-19 Preparation for Biomedical Professionals Patient](https://reader034.vdocuments.net/reader034/viewer/2022042622/5f8020e535e36323102e1503/html5/thumbnails/70.jpg)
NiBP Test Configuration
For Dynamic simulation For Static Calibration
![Page 71: Session 4 - assistinternational.orgassistinternational.org/wp-content/uploads/2020/05/Session-4-Patient-Monitors...Session 4 COVID-19 Preparation for Biomedical Professionals Patient](https://reader034.vdocuments.net/reader034/viewer/2022042622/5f8020e535e36323102e1503/html5/thumbnails/71.jpg)
NIBP Analyzer
![Page 72: Session 4 - assistinternational.orgassistinternational.org/wp-content/uploads/2020/05/Session-4-Patient-Monitors...Session 4 COVID-19 Preparation for Biomedical Professionals Patient](https://reader034.vdocuments.net/reader034/viewer/2022042622/5f8020e535e36323102e1503/html5/thumbnails/72.jpg)
Leak Tests
72
Leak Test Measures leak rate of a NIBP monitor, cuff, and hose
![Page 73: Session 4 - assistinternational.orgassistinternational.org/wp-content/uploads/2020/05/Session-4-Patient-Monitors...Session 4 COVID-19 Preparation for Biomedical Professionals Patient](https://reader034.vdocuments.net/reader034/viewer/2022042622/5f8020e535e36323102e1503/html5/thumbnails/73.jpg)
Sim Cube Leak Test
• This mode is used for measuring leak rates in NIBP monitors, their cuff and their hoses.
• The Sim-Cube waits until it detects that cuff inflation is complete, then the leak test mode will simply display the cuff pressure.
• Once cuff inflation completion is detected (less then 8mmHg change in a 5 second window), the leak test mode will start its elapsed timer. When the elapsed timer reaches 15 seconds (to allow for initial pressure settling), the display will begin to cycle every 5 seconds, showing static pressure, indicated by P (in mmHg), leak rate, indicated by L (in mmHg per minute); and elapsed time (in Min:Sec).
• In many cases the monitor must be placed in a special test mode so that it will not release the cuff pressure.
73
![Page 74: Session 4 - assistinternational.orgassistinternational.org/wp-content/uploads/2020/05/Session-4-Patient-Monitors...Session 4 COVID-19 Preparation for Biomedical Professionals Patient](https://reader034.vdocuments.net/reader034/viewer/2022042622/5f8020e535e36323102e1503/html5/thumbnails/74.jpg)
Patient MonitorsTROUBLESHOOTING
![Page 75: Session 4 - assistinternational.orgassistinternational.org/wp-content/uploads/2020/05/Session-4-Patient-Monitors...Session 4 COVID-19 Preparation for Biomedical Professionals Patient](https://reader034.vdocuments.net/reader034/viewer/2022042622/5f8020e535e36323102e1503/html5/thumbnails/75.jpg)
Troubleshooting
What do I do if the battery doesn’t hold a charge?
1. Check the battery.• If battery is discharged, recharge battery.
• If problem persists after fully charged, replace the battery (P/N: M6010
2. If problem persists after you replace the battery, replace
SMPS (P/N: M2012)
![Page 76: Session 4 - assistinternational.orgassistinternational.org/wp-content/uploads/2020/05/Session-4-Patient-Monitors...Session 4 COVID-19 Preparation for Biomedical Professionals Patient](https://reader034.vdocuments.net/reader034/viewer/2022042622/5f8020e535e36323102e1503/html5/thumbnails/76.jpg)
What do I do if the monitor wont turn on?
1. Check the battery.
• If battery is defective, replace the battery (P/N: M6010).
2. Check AC Indicator.
• If the AC Indicator isn’t lit, replace SMPS (P/N: M2012)
Troubleshooting
![Page 77: Session 4 - assistinternational.orgassistinternational.org/wp-content/uploads/2020/05/Session-4-Patient-Monitors...Session 4 COVID-19 Preparation for Biomedical Professionals Patient](https://reader034.vdocuments.net/reader034/viewer/2022042622/5f8020e535e36323102e1503/html5/thumbnails/77.jpg)
Troubleshooting
What do I do if the display malfunctions?
1. Check the connection between main board and LCD.
2. Check Main board; if main board is defective, replace main board (P/N: P1031)
3. Check LCD; if LCD is defective, replace LCD (P/N: M4022).
![Page 78: Session 4 - assistinternational.orgassistinternational.org/wp-content/uploads/2020/05/Session-4-Patient-Monitors...Session 4 COVID-19 Preparation for Biomedical Professionals Patient](https://reader034.vdocuments.net/reader034/viewer/2022042622/5f8020e535e36323102e1503/html5/thumbnails/78.jpg)
Troubleshooting
If alarm message ‘Asystole’ appears, it can be caused by the defective main board. You should replace the ECG board.
What do I do if the ECG cable malfunctions?
1. Check ECG cable; if the problem persists after ECG cable is replaced, check ECG connector.
2. Check Main board; if Main board is defective, Replace Main Board.
![Page 79: Session 4 - assistinternational.orgassistinternational.org/wp-content/uploads/2020/05/Session-4-Patient-Monitors...Session 4 COVID-19 Preparation for Biomedical Professionals Patient](https://reader034.vdocuments.net/reader034/viewer/2022042622/5f8020e535e36323102e1503/html5/thumbnails/79.jpg)
Troubleshooting
What do I do if the NIBP accessories malfunction?
1.Ensure that the appropriate cuff and hose are used with the corresponding patient type.
2.Check the connection between NIBP module and Patient monitor.
3.Check NIBP module. If NIBP module is defective, replace or repair NIBP module.
![Page 80: Session 4 - assistinternational.orgassistinternational.org/wp-content/uploads/2020/05/Session-4-Patient-Monitors...Session 4 COVID-19 Preparation for Biomedical Professionals Patient](https://reader034.vdocuments.net/reader034/viewer/2022042622/5f8020e535e36323102e1503/html5/thumbnails/80.jpg)
TroubleshootingWhat can cause inaccurate results in automated BP units?
• Incorrect cuff size
• Incorrect cuff application
• Arrhythmias, irregular heart rate
• Rapid change in pressure
• Patient movement (twitching, shivering)
• Placement of cuff is not at heart level
![Page 81: Session 4 - assistinternational.orgassistinternational.org/wp-content/uploads/2020/05/Session-4-Patient-Monitors...Session 4 COVID-19 Preparation for Biomedical Professionals Patient](https://reader034.vdocuments.net/reader034/viewer/2022042622/5f8020e535e36323102e1503/html5/thumbnails/81.jpg)
Troubleshooting
Blood Pressure Error Codes (Welch Allyn):
• C02 - Autozero failure; check for air obstruction, limit patient movement
• C03 - Inflation too rapid; check for kinked hose or air obstruction.
• C04 - Excessive inflation time; check for air leaks
• C05 - Excessive noise; check patient condition, cuff placement, and limit patient movement.
• C06 - Measurement outside device range, check patients condition.
• E10 - Cuff overpressure; check patients condition.
• E11 - Internal safety violation.
![Page 82: Session 4 - assistinternational.orgassistinternational.org/wp-content/uploads/2020/05/Session-4-Patient-Monitors...Session 4 COVID-19 Preparation for Biomedical Professionals Patient](https://reader034.vdocuments.net/reader034/viewer/2022042622/5f8020e535e36323102e1503/html5/thumbnails/82.jpg)
Troubleshooting
What can I do if the SpO2 module malfunctions?
A. Check SpO2 Sensor
If SpO2 Sensor isn’t on, Replace SpO2 Sensor.
B. Ensure that LED intensity increase when opening SpO2 Sensor.
If LED intensity doesn’t increase, Replace or repair SpO2
module
C. Test with Spo2 Simulator to verified if the probe or system fail
D. Check or replace the Main Board.
![Page 83: Session 4 - assistinternational.orgassistinternational.org/wp-content/uploads/2020/05/Session-4-Patient-Monitors...Session 4 COVID-19 Preparation for Biomedical Professionals Patient](https://reader034.vdocuments.net/reader034/viewer/2022042622/5f8020e535e36323102e1503/html5/thumbnails/83.jpg)
Typical Error Breakdown
![Page 84: Session 4 - assistinternational.orgassistinternational.org/wp-content/uploads/2020/05/Session-4-Patient-Monitors...Session 4 COVID-19 Preparation for Biomedical Professionals Patient](https://reader034.vdocuments.net/reader034/viewer/2022042622/5f8020e535e36323102e1503/html5/thumbnails/84.jpg)
System Processing
![Page 85: Session 4 - assistinternational.orgassistinternational.org/wp-content/uploads/2020/05/Session-4-Patient-Monitors...Session 4 COVID-19 Preparation for Biomedical Professionals Patient](https://reader034.vdocuments.net/reader034/viewer/2022042622/5f8020e535e36323102e1503/html5/thumbnails/85.jpg)
Sample Scenarios
If the user reports that the BP monitor is faulty:
What could cause this?
1. Monitor does not turn ON
2. Monitor turns on, but there is no response when START is pressed
3. Device starts the cycle but the cuff will not inflate
4. Cuff inflates but then does not deflate and the machine alarms
5. The monitor is frequently giving high NIBP readings
![Page 86: Session 4 - assistinternational.orgassistinternational.org/wp-content/uploads/2020/05/Session-4-Patient-Monitors...Session 4 COVID-19 Preparation for Biomedical Professionals Patient](https://reader034.vdocuments.net/reader034/viewer/2022042622/5f8020e535e36323102e1503/html5/thumbnails/86.jpg)
BMETs MUSOMA-TANZANIA
TITLE: MAINTENANCE OF PATIENT MONITOR IN MARA REGION
![Page 87: Session 4 - assistinternational.orgassistinternational.org/wp-content/uploads/2020/05/Session-4-Patient-Monitors...Session 4 COVID-19 Preparation for Biomedical Professionals Patient](https://reader034.vdocuments.net/reader034/viewer/2022042622/5f8020e535e36323102e1503/html5/thumbnails/87.jpg)
By the end of this presentation, the participants will be able to:
Understand all procedures taken during Preventive Maintenance (PM) on Patient monitors
Understand common problems associated with patient monitors
Understand how to minimize problems on patient monitors
![Page 88: Session 4 - assistinternational.orgassistinternational.org/wp-content/uploads/2020/05/Session-4-Patient-Monitors...Session 4 COVID-19 Preparation for Biomedical Professionals Patient](https://reader034.vdocuments.net/reader034/viewer/2022042622/5f8020e535e36323102e1503/html5/thumbnails/88.jpg)
Patient monitorIs the medical device which continuously measure, record, distribute and display combination of biometric values(vital signs) such as heart rate, SpO2, blood pressure, temperature, ECG and more.
![Page 89: Session 4 - assistinternational.orgassistinternational.org/wp-content/uploads/2020/05/Session-4-Patient-Monitors...Session 4 COVID-19 Preparation for Biomedical Professionals Patient](https://reader034.vdocuments.net/reader034/viewer/2022042622/5f8020e535e36323102e1503/html5/thumbnails/89.jpg)
Physical inspectionPhysical inspection involves checking of
all physical conditions of the unit like -
1. Unit housing or casing
2. ECG,SPO2 cables
3. Power cord
4. Battery
5. Sensor
6. Probe connectors
The following are procedures should be taken during planned preventive maintenance (PPM) of patient monitor:-
![Page 90: Session 4 - assistinternational.orgassistinternational.org/wp-content/uploads/2020/05/Session-4-Patient-Monitors...Session 4 COVID-19 Preparation for Biomedical Professionals Patient](https://reader034.vdocuments.net/reader034/viewer/2022042622/5f8020e535e36323102e1503/html5/thumbnails/90.jpg)
BP Cuff
SPO2 sensor
Temperature sensor ECG cable
Power cord
![Page 91: Session 4 - assistinternational.orgassistinternational.org/wp-content/uploads/2020/05/Session-4-Patient-Monitors...Session 4 COVID-19 Preparation for Biomedical Professionals Patient](https://reader034.vdocuments.net/reader034/viewer/2022042622/5f8020e535e36323102e1503/html5/thumbnails/91.jpg)
Physical inspection checklist
![Page 92: Session 4 - assistinternational.orgassistinternational.org/wp-content/uploads/2020/05/Session-4-Patient-Monitors...Session 4 COVID-19 Preparation for Biomedical Professionals Patient](https://reader034.vdocuments.net/reader034/viewer/2022042622/5f8020e535e36323102e1503/html5/thumbnails/92.jpg)
Electrical safety
Electrical safety is important in a patient monitor due to the hazards that can cause electric shock to a patient.
Electrical Safety Analyzer is used to check the electrical safety of Patient monitor.
![Page 93: Session 4 - assistinternational.orgassistinternational.org/wp-content/uploads/2020/05/Session-4-Patient-Monitors...Session 4 COVID-19 Preparation for Biomedical Professionals Patient](https://reader034.vdocuments.net/reader034/viewer/2022042622/5f8020e535e36323102e1503/html5/thumbnails/93.jpg)
Electrical safety checklist
![Page 94: Session 4 - assistinternational.orgassistinternational.org/wp-content/uploads/2020/05/Session-4-Patient-Monitors...Session 4 COVID-19 Preparation for Biomedical Professionals Patient](https://reader034.vdocuments.net/reader034/viewer/2022042622/5f8020e535e36323102e1503/html5/thumbnails/94.jpg)
Performance testPatient stimulator is used to
check the performance of patient monitor.
Heart rate ECG wave forms NiBP SpO2 Temperature IBP Respiratory rate
![Page 95: Session 4 - assistinternational.orgassistinternational.org/wp-content/uploads/2020/05/Session-4-Patient-Monitors...Session 4 COVID-19 Preparation for Biomedical Professionals Patient](https://reader034.vdocuments.net/reader034/viewer/2022042622/5f8020e535e36323102e1503/html5/thumbnails/95.jpg)
Performance test checklist
![Page 96: Session 4 - assistinternational.orgassistinternational.org/wp-content/uploads/2020/05/Session-4-Patient-Monitors...Session 4 COVID-19 Preparation for Biomedical Professionals Patient](https://reader034.vdocuments.net/reader034/viewer/2022042622/5f8020e535e36323102e1503/html5/thumbnails/96.jpg)
Alarm problemProblems with alarm caused by
-Improper Settings-Probe connection-Power supply
Hardware problemProblems with hardware caused by
-Breakage of cables, connectors and power cord.-Circuit problems-Display problems-Failure(breakage) of buttons(keypads)-Battery drain
![Page 97: Session 4 - assistinternational.orgassistinternational.org/wp-content/uploads/2020/05/Session-4-Patient-Monitors...Session 4 COVID-19 Preparation for Biomedical Professionals Patient](https://reader034.vdocuments.net/reader034/viewer/2022042622/5f8020e535e36323102e1503/html5/thumbnails/97.jpg)
Software problemProblems with software caused by
-Power fluctuation-Artifacts-New accessories
Software problem can cause information overload that make difficult to get an overview quickly.
Clinical User ErrorClinical users can cause errors by
-Poor handling-Misplacement of some accessories-Lack of enough knowledge/training
![Page 98: Session 4 - assistinternational.orgassistinternational.org/wp-content/uploads/2020/05/Session-4-Patient-Monitors...Session 4 COVID-19 Preparation for Biomedical Professionals Patient](https://reader034.vdocuments.net/reader034/viewer/2022042622/5f8020e535e36323102e1503/html5/thumbnails/98.jpg)
1. Proper handling and care2. Doing preventive maintenance on time by using test
equipment (Patient Monitor Simulator and Electrical Safety Analyzer)
3. Doing calibration4. Using UPS or voltage regulators to avoid power fluctuation5. Providing enough knowledge (training) to the users6. Ensure health centers have enough Biomedical
engineers/technicians.
![Page 99: Session 4 - assistinternational.orgassistinternational.org/wp-content/uploads/2020/05/Session-4-Patient-Monitors...Session 4 COVID-19 Preparation for Biomedical Professionals Patient](https://reader034.vdocuments.net/reader034/viewer/2022042622/5f8020e535e36323102e1503/html5/thumbnails/99.jpg)
FIGHT AGAINST COVID-19
![Page 100: Session 4 - assistinternational.orgassistinternational.org/wp-content/uploads/2020/05/Session-4-Patient-Monitors...Session 4 COVID-19 Preparation for Biomedical Professionals Patient](https://reader034.vdocuments.net/reader034/viewer/2022042622/5f8020e535e36323102e1503/html5/thumbnails/100.jpg)
Feel free to speak up or use the chat function so that our moderators can speak for you!
Discussion