set with continuity tester and instruction manual. the msa plus 250 ex multi can be used to join the...
TRANSCRIPT
Section 12
Fusion Machines and Tools
P08
0117
5
Effective Jan. 1, 2013. See www.gfpiping.com for updated info.
Fusi
on T
echn
olog
y P
rodu
ct R
ange
Elec
trof
usio
nSo
cket
Con
tact
B
utt o
r So
cket
M
anua
l
Con
tact
But
tIn
frar
ed (I
R)
Bea
d an
d
Cre
vice
Fr
ee
Elec
tro
Plu
sM
SA 2
50Ea
sy
Fuse
MSE
H
and
Tool
SG-1
10SG
-160
MC
110
GF
160
GF
250
GF
315
GF
500
IR 6
3 P
lus®
IR 1
10
Plu
s®IR
225
P
lus®
IR 3
15
Plu
s®B
CF®
P
lus
PR
OG
EF®
St
anda
rdN
/AN
/AN
/A16
–110
16–1
1032
–160
20–1
1040
–160
75–2
5090
–315
200–
400
20–6
320
–110
63–2
25N
/AN
/A
PR
OG
EF®
N
atur
alN
/AN
/AN
/AN
/AN
/A32
–90
20–9
0N
/AN
/AN
/AN
/A20
–63
20–9
063
–90
N/A
20–9
0
PP
ro-S
eal™
½"–
3"½
"–3"
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
SYG
EF®
Plu
s®N
/AN
/AN
/AN
/AN
/AN
/AN
/AN
/AN
/AN
/AN
/A20
–63
20–1
1063
–225
250–
315
20–1
10
SYG
EF®
N/A
N/A
N/A
16–6
316
–63
32–1
60N
/AN
/AN
/AN
/A20
0–31
520
–63
20–1
1063
–225
250–
315
20–1
10
Fuse
al®
1½"–
12"
1½"–
12"
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
Fuse
al
25/5
0™1½
"–6"
1½"–
6"N
/AN
/AN
/AN
/AN
/AN
/AN
/AN
/AN
/AN
/AN
/AN
/AN
/AN
/A
Fuse
al
Squa
red™
1½"–
12"
1½"–
12"
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
PE1
00N
/AN
/A2”
–26”
N/A
N/A
N/A
N/A
2”–4
”N
/A4”
–10”
8”–1
8”2”
N/A
2”–8
”N
/AN
/A
P08
0117
5
Effective Jan. 1, 2013. See www.gfpiping.com for updated info.
PROGEF Standard Polypropylene/PE100 Polyethylene (Metric)
Dim (mm)Pressure 90 110 125 140 160 180 200 225 250 280 315 355 400 450 500 560 630
GF3
15
SDR 5
SDR 6
SDR 7.4
SDR 11
SDR 17.6
*Max. Ftg × Ftg
Max. Pipe × Pipe
Dim (mm)Pressure 90 110 125 140 160 180 200 225 250 280 315 355 400 450 500 560 630
GF4
00
SDR 6
SDR 7.4
SDR 11
SDR 17.6
SDR 26
SDR 33
SDR 41
*Max. Ftg × Ftg
Max. Pipe × Pipe
Dim (mm)Pressure 90 110 125 140 160 180 200 225 250 280 315 355 400 450 500 560 630
GF5
00
SDR 6
SDR 7.4
SDR 11
SDR 17.6
SDR 26
SDR 33
SDR 41
*Max. Ftg × Ftg
Max. Pipe × Pipe
Dim (mm)Pressure 90 110 125 140 160 180 200 225 250 280 315 355 400 450 500 560 630
GF6
30
SDR 6
SDR 11
*Max. Ftg × Ftg
Max. Pipe × Pipe
* Note: Maximum fitting size includes flange adapters
Effective Jan. 1, 2013. See www.gfpiping.com for updated info.
PE100 Polyethylene (IPS)
Dim (inch)Pressure 3” 4’ 6” 8” 10” 12” 14” 16” 18” 20” 22” 24”
GF3
15
SDR 11
SDR 17
*Max. Ftg × Ftg
Max. Pipe × Pipe
Dim (inch)Pressure 3” 4’ 6” 8” 10” 12” 14” 16” 18” 20” 22” 24”
GF4
00
SDR 11
SDR 17
*Max. Ftg × Ftg
Max. Pipe × Pipe
Dim (inch)Pressure 3” 4’ 6” 8” 10” 12” 14” 16” 18” 20” 22” 24”
GF5
00
SDR 11
SDR 17
*Max. Ftg × Ftg
Max. Pipe × Pipe
Dim (inch)Pressure 3” 4’ 6” 8” 10” 12” 14” 16” 18” 20” 22” 24”
GF6
30
SDR 11
SDR 17
*Max. Ftg × Ftg
Max. Pipe × Pipe
* Note: Maximum fitting size includes flange adapters
Effective Jan. 1, 2013. See www.gfpiping.com for updated info.
12.5
Fusion TechnologyPage
Equipment for Cutting, Chamfering, Peeling Plastic Pipe 12.7
Electro Plus & Accessories 12.12
MSA250 & Accessories 12.14
SG 125 Socket Fusion Machine 12.17
MC 110 Butt Fusion Machine 12.21
TM 160 - 250- 315 CNC 12.23
GF 400 CNC Butt fusion machine 12.24
GF 630 CNC Butt fusion machine 12.26
Facing Tool Blade Sets for GF 160-630 12.28
IR-63 Plus® Fusion Joining Machineand Accessories
12.31
IR-110 Plus® Fusion Joining Machine and Accessories 12.34
IR-225 Plus® Fusion Joining Machine and Accessories 12.36
Effective Jan. 1, 2013. See www.gfpiping.com for updated info.
12.6
Page
Accessories for the IR plastic fusion joining machines 12.38
Upgrade programs for IR plastic fusionjoining machines
12.40
BCF® Plus Plastic Fusion Joining Machine 12.44
Accessories for the BCF®Plus plastic fusion joining machine 12.49
Rental Program 12.51
Effective Jan. 1, 2013. See www.gfpiping.com for updated info.
Fusion Technology
^ = 40% Restock Charge* = Non-Cancelable/Non-Returnable
12.7
Equipment for Cutting, Chamfering, PeelingPlastic PipePPC Plastic pipe cutter D• For cutting plastic pipes d10 - d160d-d[mm]
Article Part No. USD lbs closestinch
10 - 63 PPC 63, s max. = 7.2mm 790 109 001 * 92.00 1.907 1∕8 - 250 - 110 PPC 110, s max. = 12.7mm 790 109 002 * 196.00 3.580 1 1∕2 - 4
110 - 160 PPC 160, s max. = 19.0mm 790 109 003 * 234.00 4.877 4 - 6 Replacement cutting wheels D• for plastic pipe cutterd-d[mm]
Article Part No. USD lbs
10 - 63 SR 63 max. s=7,2 mm 790 109 011 * 26.00 0.00950 - 110 SR 110/160 max. s=12,7 mm 790 109 012 * 43.00 0.033
110 - 160 SR 160 max. s=19,0 mm 790 109 013 * 51.00 0.051 KS 355 Plastic Pipe Cutter D• The KS 355 is the ideal tool for right-angled cuts with no misalignment of PE, PP and
PVC pipes• Pipe outer dimension from 160 – 355 mm, wall-thickness from 8 – 40 mm• Unique clamping mechanism, no additional tools like belts, chains or reduction inserts
necessaryTechnical data:Dimension Range: 160-355mmVoltage: 230V ACPower: 1520 WattFrequency: 50-60 HzRPM: 7600Sound Level: 85 dB (A)Weight: 15.4 Kg
• Weight of the saw: 13,0 kg• Power: 1750 W ; 230 V 50 / 60 Hz• Supplied with transport box: Dimension 700 x 350 x 500 mm; Weight 17,0 kgd-d[mm]
Part No. USD lbs
160 - 355 790 202 001 * 3920.00 77.161 KS 355 Saw blade Ø 180x30 DPart No. USD lbs
790 202 011 * 280.00 0.992
Effective Jan. 1, 2013. See www.gfpiping.com for updated info.
Fusion Technology
^ = 40% Restock Charge* = Non-Cancelable/Non-Returnable
12.8
Manual pipe peeling tool Dd[mm]
Part No. USD lbs
20 799 300 260 * 128.00 0.19225 799 300 270 * 128.00 0.17632 799 300 280 * 128.00 0.21840 799 300 290 * 176.00 0.52950 799 300 300 * 187.00 0.538
63 799 300 310 * 213.00 1.11875 799 300 320 * 240.00 1.49990 799 300 330 * 277.00 2.218
110 799 300 340 * 300.00 2.987 Replacement BladePeeling tool blade
D
d[mm]
Part No. USD lbs
20 799 300 266 * 24.00 0.02925 799 300 276 * 24.00 0.03332 799 300 286 * 24.00 0.00240 799 300 296 * 24.00 0.04450 799 300 306 * 24.00 0.042
63 799 300 316 * 35.00 0.05375 799 300 326 * 35.00 0.06290 799 300 336 * 50.00 0.084
110 799 300 346 * 50.00 0.101 Chamfering Tools D• Chamfering tool (15° bevel) for plastic pipes (PVC, ABS, PB, PP, PE). Coated prism
surface suitable for clean room applications. Fast and reliable adjustment to the differ-ent pipe diameters and wall thickness.
d-d[mm]
Part No. USD lbs
16 - 200 790 309 003 * 401.00 2.25863 - 400 790 309 004 * 524.00 5.617
Chamfering Tool DChamfering tool for PPro-Seal, Fuseal PP, and Fuseal 25/50. Sizes 1 ½” to 4”
Part No. USD lbs Description
790 109 104 101.00 0.000 1 1/2" - 4" Chamfering Tool
Effective Jan. 1, 2013. See www.gfpiping.com for updated info.
Fusion Technology
^ = 40% Restock Charge* = Non-Cancelable/Non-Returnable
12.9
KS 1600 Plastic Pipe Cutter DThe KS 1600 is used for cutting plastic pipes fast, cleanly amd properly right-angled- from diameter 500 mm up to 1600 mm with a wall thickness of max. 60 mm. For eachpipe diameter, the appropriate chain length is necessary. The saw is to be put on thetensioned chain as per user manual which serves as a guiding device for the saw overa full 360° turn.The guard plate covers the saw blade also during operation and provides full protectionfor the user at all times.The KS 1600 basic kit consists of a circular-hand saw, 230 V / 2200 W with carriage,2 tension chains for d560 mm and d630 mm as well as a chain tensioner. The wholeequipment comes in a convenient and robust transport box.The easy handling and the optimal safety features make this tool indispensable on ev-ery building site.Scope of delivery:1 Circular-hand saw, 1 tensioning chain d560 mm, 1 tensioning chain d630 mm, 1 chaintensioner, 1 hex-wrench size 5, 1 hex-wrench size 6, 1 operating instruction, trans-port-box Technical data: Dimension range: d500 –1600 mm
(In combination with the respective tensioning chain)Plug: EU-PlugVoltage: 230 V ACPower: 2200 WattFrequency: 50-60 HzCircular saw blade outer-Ø: 240 mmRPM: 4100Sound level: 104 dB (A)Weight saw: 15, 5 kgWeight KS 1600 Basic-Kit: 43,5 kgDimensions saw (WxHxD): 790 x 330 x 335 mmDimensions Transport-Box: 950 x 400 x 395 mm
d-d[mm]
Type Part No. USD lbs
500 - 1600 KS 1600 Basic Kit 790 109 600 * 5454.00 94.798 KS 1600 Chain Holder D• Chain tensioner is included in the scope of delivery of the KS 1600 Basic Kit (790 109
600).d-d[mm]
Part No. USD lbs
500 - 1600 790 109 616 * 562.00 0.882 KS 1600 Tensioning Chains D• Chains for d560 and d630 mm are included in the scope of delivery of the KS 1600
Basic-Kit (790 109 600).d[mm]
Part No. USD lbs
500 790 109 605 * 493.00 11.464
Effective Jan. 1, 2013. See www.gfpiping.com for updated info.
Fusion Technology
^ = 40% Restock Charge* = Non-Cancelable/Non-Returnable
12.10
AQUATAP Installation Tools DTool Box not sold separately
Number Description Part No. USD
1-7 Complete Tool Box Kit (Includes Items 1-7) 799 530 200 * 466.002 Heater Plate Protector 799 530 001 * 28.003 5/8" Flare - Heater Bushing 799 530 155 * 50.004 Flare Mandrel 799 530 156 * 98.005 Tubing Hex Jaw Pliers 799 530 157 * 28.006 Tube Cutter (KTS 125) 799 530 158 * 30.00
Effective Jan. 1, 2013. See www.gfpiping.com for updated info.
Ele
ctr
ofu
sio
n P
roce
ss
Tim
es
Elec
trof
usio
nP
rodu
ct½
"¾
"1"
1½"
2"3"
4"6"
8"10
"12
"
Elec
tro
Plu
san
dM
SA 2
50
PP
ro-S
ea
l™1
:20
1:2
71
:32
1:3
61
:50
1:3
0
Fu
se
al®
1:2
01
:30
1:4
01
:55
3:1
04
:00
4:0
05
:00
Fu
se
al
25
/50
™
1:2
61
:39
1:5
22
:10
3:5
5
*All
tim
es in
miu
tes:
sec
onds
and
are
app
roxi
mat
e ba
sed
in 6
8˚F/
20˚C
am
bien
t tem
pera
ture
. The
se ti
mes
are
onl
y fo
r th
e fu
sion
pro
cess
and
do
not i
nclu
de th
e co
olin
g ti
mes
.
Nu
mb
er
of
Jo
ints
Po
ss
ible
pe
r C
yc
le
Elec
trof
usio
nP
rodu
ct½
"¾
"1"
1½"
2"3"
4"6"
8"10
"12
"
Elec
tro
Plu
san
d M
SA 2
50
PP
ro-S
ea
l™4
44
44
4
Fu
se
al®
44
44
42
22
Fu
se
al
25
/50
™4
44
4
12.11Effective Jan. 1, 2013. See www.gfpiping.com for updated info.
Fusion Technology
^ = 40% Restock Charge* = Non-Cancelable/Non-Returnable
12.12
Electro Plus & AccessoriesElectro Plus® DAdvantagesIntuitive user interfaceMultiple joint capability for speedy installationsIntegral carrying case for ease of transportationOne-button repeat fusion cycle for same size jointsSelf-diagnostic error detection systemAutomatic compensation for ambient temperature
The Electro Plus® fusion machine can be used to join the following piping systems:Fuseal 1½-12'', Fuseal Squared 1½-12'', Fuseal 25/50 1½-6'' and PPro-Seal ½-3''.
This complete machine includes:Fusion Power Unit, Hand Held Unit and the Cable Assembly. Technical Data Operating Temperature 14°F (-10°C) to 113°F (45°C)Input Voltage 100-130 V AC / 200-250 V ACInput Frequency 50Hz - 60 HzOutput Voltage 0 – 28.5 V ACOutput Current 0-50 AmpsPower Consumption 1200 Watts max.Power Cable Length 5ft. (1.5m)Fusion Cable Length 18ft. (5.5m)Remote Cable Length 20ft. (6m)Dimensions (WxHxD) 22x14x10 inchWeight 45lbs (20.5kg)
Description Part No. USD lbs
Electro Plus 150 000 001 * 2115.00 0.002 Hand Held Unit DComplete hand held unit with connection cable and protection case.This is a replacement unit which can be used on any Electro Plus machine.
Description Part No. USD
Hand Held Unit 150 000 003 * 371.00 Cable Assembly DComplete cable assembly with connector plug.This is a replacement unit which can be used on any Electro Plus machine.
Description Part No. USD
Cable Assembly 150 000 004 * 525.00
Effective Jan. 1, 2013. See www.gfpiping.com for updated info.
Fusion Technology
^ = 40% Restock Charge* = Non-Cancelable/Non-Returnable
12.13
Fusion Power Unit DComplete fusion power unit with main power cable.This is a replacement unit which can be used with any hand held unit and cable assem-bly.
Description Part No. USD
Fusion Power Unit 150 000 002 * 1272.00
Effective Jan. 1, 2013. See www.gfpiping.com for updated info.
Fusion Technology
^ = 40% Restock Charge* = Non-Cancelable/Non-Returnable
12.14
MSA250 & AccessoriesMSA Plus 250 EX MultiAutomatic Electrofusion Unit
D
NEW, environmental friendly manufactured electrofusion unit according EU direc-tive 2002/95/EU (RoHS).Monovalent automatic electrofusion unit with barcode scanner. The MSA units with theunique inverter technology and the active cooling system for trouble-free operation fromgenerator or mains supply. Suitable for jointing in series. The unit is robust, light andeasy to use. Single push-button operation, display shows fusion time and energy con-sumed. Inclusive transport box, 1 pair of angle adapter clips 4.0mm, cable assembly,barcode set with continuity tester and instruction manual.
The MSA Plus 250 EX Multi can be used to join the following piping systems: PE Ø20-400; INSTAFLEX PB Ø 125, 160, 225; Fuseal SeaDrain Ø 1½-12''; Fuseal 1½-12'';Fuseal Squared 1½-12''; Fuseal 25/50 1½-6''; and PPro-Seal. Technical Data Ambient temperature 14°F (-10°C) to 113°F (+45°C)Mains voltage 180 V - 264 V ACMains frequency 45Hz - 65 HzFusion voltage 8 - 42 (48) V ACFusion current max. 80 APower max. 3500 WProtection 1 / IP 65Mains cable 3 mFusion cable 3 mDimensions (WxHxD) 20"x15"x10"Weight incl. cables 25.5 lbs (11.5 kg)Display LED 1 x 4 N, 7 SegmentsSize display (WxH) 50 x 18 mm
Type Part No. USD lbs Description
MSA Plus 250 EX Multi 799 350 520 * 3339.00 36.067 barcode scanner, transport case Barcode Set with Continuity Tester DReplacement barcode set with barcode cards for the following systems:Fuseal 1 ½-12'', Fuseal 25/50 1½-6'' and PPro-Seal ½-3''.
Description Part No. USD lbs
Barcode Set with Continuity Tester 799 350 900 * 28.00 0.661Continuity Tester 799 350 901 * 17.00 0.441
Operation Mode Cards MSA250 EX Multi 799 350 902 * 11.00 0.220
Effective Jan. 1, 2013. See www.gfpiping.com for updated info.
Fusion Technology
^ = 40% Restock Charge* = Non-Cancelable/Non-Returnable
12.15
MSA Fusion Cables DReplacement MSA fusion cables 5 feet long.
Description Part No. USD lbs
Single Cable 799 350 910 * 280.00 0.882Cable Assembly 799 350 911 * 101.00 1.764
MSA Barcode Scanner D• Robust, handy barcode scanner with a high reading performance made for the con-
struction site. Quick, safe and professional!Compatible with MSA 500, MSA 3000, MSA 250, 300, 350 and 400 and MSA Plus250-400 Electrofusion control units.
Part No. USD lbs Description
799 350 419 * 385.00 0.772 Barcode scanner with pouch and instruc-tions
MSA Carrying Case DDescription Part No. USD lbs
MSA Carrying Case, 20x10x15" 799 350 473 * 201.00 12.213
Effective Jan. 1, 2013. See www.gfpiping.com for updated info.
Sock
et F
usio
n P
roce
ss T
imes
*
Sock
et F
usio
nP
rodu
ct16
20
25
32
40
50
63
75
90
110
MSE
Han
dtoo
ls
or S
G 1
25P
RO
GEF
® S
tand
ard
1515
2124
3844
6268
8811
0
PR
OG
EF®
Nat
ural
1515
2124
3844
6268
88
SYG
EF®
PVD
F14
1618
2628
3444
*All
tim
es in
sec
onds
and
are
app
roxi
mat
e ba
sed
on 6
8°F/
20°C
am
bien
t tem
pera
ture
. Ti
mes
do
not a
ccou
nt fo
r fa
cing
, pee
ling,
and
cle
anin
g pe
r th
e
GF
Fusi
on T
rain
ing
prog
ram
.
12.16 Effective Jan. 1, 2013. See www.gfpiping.com for updated info.
Fusion Technology
^ = 40% Restock Charge* = Non-Cancelable/Non-Returnable
12.17
SG 125 Socket Fusion MachineSG 125 Socket Fusion MachineFor fusion joining of PP, PE, PB and PVDF pipe andfittings
D
• Portable heating element - socket fusion machine for use in the workshop and on jobsites.
• Dimension 20 - 90• Base machine• Compact, sturdy design, distortion-free machine bed• Handwheel with torque locking mechanism for the slide movement• Fast selection of insertion depth according to the pipe dimension• Heater• Thermostatic temperature control• High temperature accuracy over the entire heating surface• Additional standard equipment on the basic model• Universal, left and right prismatic clamping devices, complete, for clamping pipe and
fittings. Additional set of prismatic clamping devices for outer clamping of pipes avail-able as an option.
• V-shaped pipe support d 20 - 125 mm• Back stop• Machine specific tool set• Timer to clock fusion times• Including transport packaging, without accessoriesd-d[mm]
Performance Part No. USD lbs
20 - 90 115 V/1500 W 790 310 036 * 8348.00 143.299 Transportation Box SG125 DDescription Part No. USD
Transportation Box SG125 155107276U * 323.00
Universal prismatic clamping device, complete Dd-d[mm]
Part No. USD lbs
20 - 125 790 310 040 * 501.00 7.275
Backstop, complete Dd-d[mm]
Part No. USD lbs
20 - 110 790 310 012 * 167.00 1.323
V-shaped pipe support, complete Dd-d[mm]
Part No. USD lbs
20 - 125 790 310 041 * 223.00 1.543
Effective Jan. 1, 2013. See www.gfpiping.com for updated info.
Fusion Technology
^ = 40% Restock Charge* = Non-Cancelable/Non-Returnable
12.18
Replacement heating element SG125 Dd-d[mm]
Performance Description Part No. USD lbs
20 - 125 115 V/1500 W thermostatic 790 310 046 868.00 5.952 MSE 63/MSE 110 Socket fusion tools D• For fusion joining of PP, PE and PVDF pipes and fitting• Choice of electronic or thermostatic temperature control• Support for heating bushes and spigots of d 16 to 63 mm (110 mm)• Pick up for floor stand or table clamp• Monitoring and setting of heating element temperature• High temperature accuracy over the entire heating surface• T = thermostatic temperature control / E = electronic temperature controld-d[mm]
Type Performance Part No. USD lbs
16 - 63 MSE 63 T 115 V/800 W 790 105 096 * 270.00 4.57516 - 110 MSE 110 T 115 V/1500 W 790 105 126 * 390.00 7.055
MSE 63/MSE 110 - Set - Socket fusion tools D• For fusion joining of PP, PE and PVDF pipes and fitting• All devices equipped with on/off switch, mains and temperature control lamp• Choice of electronic or thermostatic temperature control• Support for heating bushes and spigots of d 16 to 63 mm (110 mm)• Pick up for floor stand or table clamp• Monitoring and setting of heating element temperature• High temperature accuracy over the entire heating surface• High-quality, non-stick PTFE-coating with long service life• Heating bushes and spigots• Available as a complete set in a practical metal case• Table clamp• Floor stand for MSE 63• Alen screws and key• T = thermostatic temperature control / E = electronic temperature controld-d[mm]
Type Performance Part No. USD lbs
16 - 63 MSE 63 T 115 V/800 790 105 098 * 1058.00 18.96016 - 110 MSE 110 T 115 V/1500 790 105 128 * 1733.00 39.021
Effective Jan. 1, 2013. See www.gfpiping.com for updated info.
Fusion Technology
^ = 40% Restock Charge* = Non-Cancelable/Non-Returnable
12.19
Heating spigots and bushes D• High-quality, non-stick PTFE-coating with long service life• Type B according to DVS 2208-1 (mechanical calibrated pipe ends)• Always delivered in pairs (also usable for SG 110, SG 125, not for SG 160)d[mm]
Part No. USD lbs
16 799 300 155 * 78.00 0.18720 799 300 156 * 84.00 0.19825 799 300 157 * 89.00 0.34032 799 300 158 * 101.00 0.46540 799 300 159 * 111.00 0.507
50 799 300 160 * 128.00 0.95763 799 300 161 * 145.00 1.31075 799 300 162 * 167.00 2.16390 799 300 163 * 223.00 3.175
110 799 300 164 * 284.00 4.872
Effective Jan. 1, 2013. See www.gfpiping.com for updated info.
Con
tact
But
t Fu
sion
Pro
cess
Tim
es*
Mac
hine
Pro
duct
2025
3240
5063
7590
110
160
200
225
250
315
355
400
450
MC
110
PR
OG
EF®
Sta
ndar
d7.
007.
007.
008.
0011
.00
12.0
015
.00
18.0
021
.00
SG 1
60P
RO
GEF
® S
tand
ard
7.00
8.00
11.0
012
.00
15.0
018
.00
21.0
029
.00
GF
160
PR
OG
EF®
Sta
ndar
d8.
0011
.00
12.0
015
.00
18.0
021
.00
29.0
0
GF
250
PR
OG
EF®
Sta
ndar
d18
.00
21.0
029
.00
35.0
038
.00
42.0
0
GF
315
PR
OG
EF®
Sta
ndar
d18
.00
21.0
029
.00
35.0
038
.00
42.0
052
.00
GF
315
PR
OG
EF®
Sta
ndar
d18
.00
21.0
029
.00
35.0
038
.00
42.0
052
.00
GF
500
PR
OG
EF®
Sta
ndar
d35
.00
38.0
042
.00
52.0
056
.00
63.0
070
.00
*All
tim
es in
min
utes
:sec
onds
and
are
app
roxi
mat
e ba
sed
on 6
8°F/
20°C
am
bien
t tem
pera
ture
. Ti
mes
onl
y ac
coun
t for
hea
ting
, joi
ning
and
co
olin
g of
pro
duct
s pe
r th
e G
F Fu
sion
Tra
inin
g P
rogr
am.
GF
reco
mm
ends
IR P
lus®
fusi
on fo
r S
YGE
F® P
VDF
prod
ucts
.
12.20 Effective Jan. 1, 2013. See www.gfpiping.com for updated info.
Fusion Technology
^ = 40% Restock Charge* = Non-Cancelable/Non-Returnable
12.21
MC 110 Butt Fusion MachineMachine MC 110, complete with electric planer D• Portable butt fusion machine for use in the workshop and on job sites. For fusion join-
ing of PP and PE pipes and fittings as well as prefabrication of segments in the sizerange d 25 - 110 mm and up to PN 10.
• Machine MC 110 complete includes: machine mounting, base machine, 2 baseclamping plates (wide), base clamping plate (left narrow), electrically operated planer,thermostatic controlled heater, table clamp and transport box.
• Including transport packaging, without accessoriesd-d[mm]
Performance Part No. USD lbs
20 - 110 115V/1360W 790 109 321 * 4240.00 68.343 Reduction clamping inserts, wide D• 20 - 90 mm• Each code number defines 1 half shell. Per wide base clamping plate 2 reduction half
-shells are needed.d[mm]
Part No. USD lbs
20 790 109 326 * 23.00 0.33125 790 109 327 * 23.00 0.30632 790 109 328 * 23.00 0.29340 790 109 329 * 23.00 0.28750 790 109 330 * 23.00 0.249
56 790 109 342 Call 0.30263 790 109 331 * 23.00 0.26575 790 109 332 * 23.00 0.24590 790 109 333 * 23.00 0.220
Base clamping plate, right narrow D• 110 mm for fitting/pipe joints• For mounting the narrow reduction clamping inserts• Freely adjustable (max. 15°)d[mm]
Part No. USD lbs
110 790 109 310 * 251.00 2.083 Reduction clamping inserts, narrow D• Each code number defines 1 half shell. Per wide base clamping plate 2 reduction half
-shells are needed.d[mm]
Part No. USD lbs
20 790 109 334 * 15.00 0.58025 790 109 335 * 15.00 0.61532 790 109 336 * 15.00 0.30040 790 109 337 * 15.00 0.56950 790 109 338 * 15.00 0.527
56 790 109 343 Call 0.25463 790 109 339 * 15.00 0.23875 790 109 340 * 15.00 0.42590 790 109 341 * 15.00 0.326
Effective Jan. 1, 2013. See www.gfpiping.com for updated info.
Fusion Technology
^ = 40% Restock Charge* = Non-Cancelable/Non-Returnable
12.22
Planer, electrically operated D• Center of planing radial adjustable.d-d[mm]
Performance Part No. USD lbs
20 - 110 115V/560W 790 109 324 * 1413.00 10.803
Heater D• Thermostatic or electronic temperature control• Including machine mounting• Control lamps (power, status)• PTFE coatingd-d[mm]
Performance Description Part No. USD lbs
20 - 110 115V/800W thermostatic 790 109 322 * Call 5.732 Table clamp DPart No. USD lbs
790 109 315 * 70.00 1.455
Flange adapter clamping unit D• For correct clamping and fusion joining of short end fittingsd-d[mm]
Part No. USD lbs
25 - 110 790 109 316 * 329.00 3.593 Replacement blades D• Sharpened on both sides (1 set = 2 pieces)Description Part No. USD lbs
short 790 118 043 * 90.00 0.099
Effective Jan. 1, 2013. See www.gfpiping.com for updated info.
Fusion Technology
^ = 40% Restock Charge* = Non-Cancelable/Non-Returnable
12.23
TM 160 - 250- 315 CNCMachine complete D• High quality, reliable and user-friendly heating element butt fusion machine for auto-
mated fusion jointing of PE and PP pipes and fittings on building sites.• Designed for applications in gas and water distribution.• Machine equipped with innovative CNC hydraulic control unit and the machine com-
ponents of the TM TOP machines: sturdy base machine, powerful planer, high perfor-mance heating element, storage case for the planer and heater.
• The distance control (potentiometer) mounted into the base machine grants controland safety throughout the complete welding process.
• Scope of delivery includes transport packaging (wooden crate), not the reduction in-serts and other accessories !
CNC Control Unit• Operator guidance from preparation to the end of the jointing process by use of sym-
bols and graphics.• Intuitive data input by touch screen operation (welding standard, material, diameter,
SDR, traceability data).• Automatic calculation, regulation and control of the fusion parameters - pressure, time
and temperature - according to country specific guidelines.• 10 freely programmable welding cycles available (e.g. for non standard dimensions
(Relining), special materials etc.).• Various configuration possibilities, such as cooling time reduction according to the
measured ambient temperature (CTC) and automatic bead build-up phase.• Selection of language.• Welding report storage on removable standard USB memory key (memory key sup-
plied with the machine).• Operator ID (ISO 12176-3), job number and pipe codes (ISO 12176-4) could
be added to each welding record by the use of the optional barcode scanner(790152052)
• Data transfer to PC (SUVI WIN-WELD software supplied with the machine) via USBinterface.
• Shock absorbing plastic housing in attractive design.• Integrated power outlets for planer and heating element.• Preinstalled socket for connection of the barcode scanner (Accessory).• Oil level control and refilling without disassembling the unit.• Two handles to carry the hydraulic unit.
Type d-d[mm]
Performance Part No. USD lbs
TM 250 CNC 75 - 250 230V/3150W 790 151 012 * Call 429.897TM 315 CNC 90 - 315 230V/3750W 790 152 012 * 28620.00 473.989
Effective Jan. 1, 2013. See www.gfpiping.com for updated info.
Fusion Technology
^ = 40% Restock Charge* = Non-Cancelable/Non-Returnable
12.24
GF 400 CNC Butt fusion machineMachine complete D• High quality, reliable and user-friendly heating element butt fusion machine for auto-
mated fusion jointing of PE and PP pipes and fittings on building sites.• Designed for applications in gas and water distribution.• Machine equipped with innovative CNC hydraulic control unit and the machine com-
ponents of the GF 400 machine: sturdy base machine, powerful planer, high perfor-mance heating element, storage case for the planer and heater.
• The distance control (potentiometer) mounted into the base machine grants controland safety throughout the complete welding process.
• Scope of delivery includes transport packaging (wooden crate), not the reduction in-serts and other accessories!
CNC Control Unit• Operator guidance from preparation to the end of the jointing process by use of sym-
bols and graphics.• Intuitive data input by touch screen operation (welding standard, material, diameter,
SDR, traceability data).• Automatic calculation, regulation and control of the fusion parameters - pressure, time
and temperature - according to country specific guidelines.• 10 freely programmable welding cycles available (e.g. for non standard dimensions,
special materials etc.).• Selection of language.• Welding report storage on removable standard USB memory key (memory key sup-
plied with the machine) and for safety reasons additionally in the CNC unit.• Data transfer to PC (SUVI WIN-WELD software supplied with the machine) via USB
interface.• Robust aluminium case with shock-absorbing plastic cover in attractive design.• Integrated power outlets for planer and heating element.• Easy oil-level-control and refilling without opening the unit.
Type d-d[mm]
Performance Part No. USD lbs
GF 400 CNC 125 - 400 400 V/5700 W 790 153 001 29256.00 451.943 Reduction clamping inserts, narrow D• d 90 - 280 mm• Each code number represents 1 piece of reduction clamping insert. Per machine and
dimension maximum 8 narrow or wide reduction clamping inserts are needed.• We recommend 4 wide and 4 narrow half shells.d[mm]
Part No. USD lbs
160 790 112 102 212.00 2.381200 790 112 104 212.00 2.083250 790 112 106 335.00 1.570
Effective Jan. 1, 2013. See www.gfpiping.com for updated info.
Fusion Technology
^ = 40% Restock Charge* = Non-Cancelable/Non-Returnable
12.25
Reduction clamping inserts, narrow D• d 125-355 mm• Each code number represents 1 piece of reduction clamping insert. Per machine and
dimension maximum 8 narrow or wide reduction clamping inserts are needed.• We recommend 4 wide and 4 narrow half shells.In order to mount the inserts d 125/d 140/d 160/d 180/d 200/d 225/d 250/d 280, the re-duction clamping insert d 315 mm, code 790 127 101, must also be usedd[mm]
Part No. USD lbs
315 790 127 111 375.00 4.034 Reduction clamping inserts set D• 4 wide and 4 narrow clamping inserts of each dimension• 8 wide clamping inserts d 315 mm• Reductions in inch sizes or special diameters upon requestd-d[mm]
Part No. USD lbs
125 - 355 790 127 156 5883.00 66.138 GF 400 Crane DDescription Part No. USD
GF 400 Crane 790 127 028 2099.00
Effective Jan. 1, 2013. See www.gfpiping.com for updated info.
Fusion Technology
^ = 40% Restock Charge* = Non-Cancelable/Non-Returnable
12.26
GF 630 CNC Butt fusion machineMachine complete D• High quality, reliable and user-friendly heating element butt fusion machine for auto-
mated fusion jointing of PE and PP pipes and fittings on building sites.• Designed for applications in gas and water distribution.• Machine equipped with innovative CNC hydraulic control unit and the machine com-
ponents of the GF 630 machine: sturdy base machine, powerful planer, high perfor-mance heating element, storage case for the planer and heater.
• The distance control (potentiometer) mounted into the base machine grants controland safety throughout the complete welding process.
• Scope of delivery includes transport packaging (wooden crate), not the reduction in-serts and other accessories!
CNC Control Unit• Operator guidance from preparation to the end of the jointing process by use of sym-
bols and graphics.• Intuitive data input by touch screen operation (welding standard, material, diameter,
SDR, traceability data).• Automatic calculation, regulation and control of the fusion parameters - pressure, time
and temperature - according to country specific guidelines.• 10 freely programmable welding cycles available (e.g. for non standard dimensions,
special materials etc.).• Selection of language.• Welding report storage on removable standard USB memory key (memory key sup-
plied with the machine) and for safety reasons additionally in the CNC unit.• Data transfer to PC (SUVI WIN-WELD software supplied with the machine) via USB
interface.• Robust aluminium case with shock-absorbing plastic cover in attractive design.• Integrated power outlets for planer and heating element.• Easy oil-level-control and refilling without opening the unit.
Type d-d[mm]
Performance Part No. USD lbs
GF 630 CNC 315 - 630 400 V/11000 W 790 155 001 39856.00 1355.829 Reduction clamping inserts set D• 4 wide and 4 narrow clamping inserts d 315, d 355, d 400, d 450• 8 wide reduction inserts d 500, d 560d-d[mm]
Part No. USD lbs
315 - 560 790 117 021 12429.00 443.125
Effective Jan. 1, 2013. See www.gfpiping.com for updated info.
Fusion Technology
^ = 40% Restock Charge* = Non-Cancelable/Non-Returnable
12.27
Reduction clamping inserts, wide D• Each code number represents 1 piece of reduction clamping insert. Per machine and
dimension maximum 8 narrow or wide reduction clamping inserts are needed.• We recommend 4 wide and 4 narrow half shells.• Reductions in inch sizes or special diameters upon requestIn order to mount the inserts d 200/d 225, the reduction clamping insert 790 116 015must also be usedd[mm]
Part No. USD lbs
315 790 116 012 212.00 8.153355 790 116 013 212.00 8.217400 790 116 014 212.00 8.457450 790 116 015 212.00 7.222
Reduction clamping inserts, narrow D• Each code number represents 1 piece of reduction clamping insert. Per machine and
dimension maximum 8 narrow or wide reduction clamping inserts are needed.• We recommend 4 wide and 4 narrow half shells.In order to mount the inserts d 315/d 355/d 400/d 450 to the base clamp d 630, the re-duction clamping insert d 500 mm, code 790 117 012, must also be usedd[mm]
Part No. USD lbs
315 790 116 020 212.00 7.985355 790 116 021 212.00 7.202400 790 116 022 212.00 5.529450 790 116 023 212.00 5.011
GF 630 Crane DDescription Part No. USD
GF 630 Crane 790 117 023 10261.00
Effective Jan. 1, 2013. See www.gfpiping.com for updated info.
Fusion Technology
^ = 40% Restock Charge* = Non-Cancelable/Non-Returnable
12.28
Facing Tool Blade Sets for GF 160-6301 set planer bladesGF 160
D
• (1 set = 2 blades)d-d[mm]
Part No. USD lbs
40 - 160 790 113 056 * 161.00 0.130 1 set planer bladesGF 250
D
• Blade has 2 cutting edges (1 set = 2 blades)d-d[mm]
Part No. USD lbs
75 - 250 790 115 024 * 200.00 0.183 1 set planer bladesGF 315
D
• Blade has 2 cutting edges (1 set = 2 blades)d-d[mm]
Part No. USD lbs
90 - 315 790 112 110 * 234.00 0.123 1 set planer bladesGF 500• Blade has 2 cutting edges (1 set = 2 blades)
Part No. USD
790 116 041 267.00 1 set planer bladesGF 630• Blade has 2 cutting edges (1 set = 2 blades)Part No. USD lbs
790 117 041 304.00 0.505
Effective Jan. 1, 2013. See www.gfpiping.com for updated info.
IR Plus® Infrared Butt Fusion Technology
Features
• Non-contactInfraredheating
• Completelycontrolledandrepeatablefusionprocessusingourproven
overlapsystem
• Minimizedanddefinedweldbead
• Provenreliabilityandsafehighpurityfusionsystem
• Controlledcoolingprocessbasedonambientandbeadtemperature
• PCMCIA-interfaceforelectronicdownloadingoffusiondata
• Integratedinterfaceforlabelandstandardprinters(hardcopyprintout)
IR-225Plus®
IR-63Plus®
IR-315Plus®
NEW! IR-110 Plus®
12.29Effective Jan. 1, 2013. See www.gfpiping.com for updated info.
Infr
ared
(IR
) P
lus®
Fus
ion
Pro
cess
Tim
es*
Tim
esa
ref
ort
hen
ewp
latf
orm
IR
Plu
sm
achi
nes
Mac
hine
Pro
duct
20
25
32
40
50
63
75
90
110
125
140
160
200
225
250
315
IR-6
3 P
lus®
P
RO
GEF
® S
tand
ard
PN
10
2:00
2:30
3:00
4:00
4:30
6:00
PR
OG
EF®
Nat
ural
PN
10
2:00
2:30
3:00
4:00
4:30
6:00
SYG
EF®
PN
16
1:30
1:30
2:00
2:00
3:00
3:00
IR-1
10 P
lus®
PR
OG
EF®
Sta
ndar
dP
N1
02:
303:
003:
004:
004:
305:
006:
007:
008:
00
PR
OG
EF®
Nat
ural
PN
10
3:30
3:30
4:00
4:30
5:00
5:30
PR
OG
EF®
Nat
ural
PN
65:
00
SYG
EF®
PN
10
2:00
2:30
SYG
EF®
PN
16
1:00
1:00
1:30
1:30
2:00
2:00
2:30
3:30
4:00
IR-2
25 P
lus®
PR
OG
EF®
Sta
ndar
dP
N1
04:
004:
305:
307:
008:
008:
3010
:00
12:3
014
:00
PR
OG
EF®
Nat
ural
PN
65:
00
SYG
EF®
PN
10
2:30
2:30
3:00
3:00
3:30
3:30
4:00
4:30
SYG
EF®
PN
16
2:30
2:30
3:00
3:00
IR-3
15 P
lus®
SYG
EF®
PN
10
8:00
10:0
0
*All
tim
es in
min
utes
:sec
onds
and
are
app
roxi
mat
e ba
sed
on 6
8°F
/20°
C a
mbi
ent t
empe
ratu
re.
Tim
es o
nly
acco
unt f
or h
eati
ng, j
oini
ng a
nd c
oolin
g of
pro
duct
s pe
r th
e G
F Fu
sion
Tr
aini
ng P
rogr
am.
12.30 Effective Jan. 1, 2013. See www.gfpiping.com for updated info.
Fusion Technology
^ = 40% Restock Charge* = Non-Cancelable/Non-Returnable
12.31
IR-63 Plus® Fusion Joining Machineand AccessoriesIR-63 Plus® Fully-Equipped Machine DModel:• Fully-equipped fusion jointing machine for welding SYGEF Standard, SYGEF
Plus, PROGEF Standard, PROGEF Natural, PROGEF Plus, PE 100, PFA in di-mensions d 20-63 mm with integrated remote welding unit, 2 USB interfaces,monochrome display with icons and 12 languages.
• 1-phase AC (50/60 Hz) 230 V L/N/PE• Machine housing complete (1 pcs.)• Heater assembly (1 pcs.)• Remote weld device (1 pcs.)• Facing tool (1 pcs.)• Transport box (1 pcs.)• Pipe stop (1 pcs.)• Clamping inserts d 20-63 mm (8 pcs. per dimension)• End caps PE d 20-63 mm (4 pcs. per dimension)• Power supply cable 230 V (1 pcs.)• Extension cable for remote weld device (1 pcs.)• Extension cable for heater (1 pcs.)• Extension cable for facing tool (1 pcs.)• Cleaning brush No. 8 (1 pcs.)• Hexagon key 3 mm (1 pcs.)• Hexagon key 4 mm (1 pcs.)• Heater protection shield (1 pcs.)• Clamping unit extension (8 pcs.)• Socket wrench (facing blades) (1 pcs.)• Screw driver, Size 0 (1 pcs.)• Accessory Tray (1 pcs.)• Manual (1 pcs.)d-d[mm]
Part No. USD lbs
20 - 63 790 131 005 * 30470.00 77.161 Power Converter DDescription Part No. USD lbs
Power Converter 115/230V AC 790 103 095 * 1256.00 0.002 Clamping inserts D• The clamping inserts are different for each dimension. They are used to clamp and
position the pipe components.d[mm]
Part No. USD lbs Pieces
20 790 131 038 * 59.00 0.198 125 790 131 039 * 59.00 0.198 132 790 131 040 * 59.00 0.115 140 790 131 041 * 59.00 0.163 150 790 131 042 * 59.00 0.220 163 790 131 043 * 59.00 0.077 1
Effective Jan. 1, 2013. See www.gfpiping.com for updated info.
Fusion Technology
^ = 40% Restock Charge* = Non-Cancelable/Non-Returnable
12.32
Clamping Inserts, IPS D• The clamping inserts are different for each dimension. They are used to clamp and po-sition the pipe components.
d[inch]
Part No. USD lbs Pieces
1∕4 790 131 446 * 59.00 0.126 11∕2 790 131 447 * 59.00 0.121 13∕4 790 131 448 * 59.00 0.117 11 790 131 449 * 59.00 0.112 1
1 1∕2 150 131 042 * 59.00 12 790 131 450 * 59.00 0.075 1
Replacement Blades for Facing Tool D• A set includes two facing knives. Each facing knife has four blades. The blade may be
turned three times before it must be replaced.d-d[mm]
Part No. USD lbs Pieces
20 - 63 790 131 045 * 148.00 0.035 2 PE Pipe End Caps D• A set includes 4 end caps. The end caps are different for each dimension. The ends
of the pipe must be closed. The caps prevent heat loss due to airflow in the fusionzone and guarantee optimum fusion results of the pipe components.
d[mm]
Part No. USD lbs Pieces
20 790 131 030 * 18.00 0.004 425 790 131 031 * 18.00 0.022 432 790 131 032 * 23.00 0.002 440 790 131 033 * 23.00 0.011 450 790 131 034 * 23.00 0.011 463 790 131 035 * 30.00 0.051 4
Heater Shield DDescription Part No. USD
Heater Shield IR63 155 131 001 * 40.00 Extension Cableclamping carriage
D
• Extension cable for remote fusion.d-d[mm]
Part No. USD lbs Pieces
20 - 63 790 131 047 * 445.00 1.764 1
Effective Jan. 1, 2013. See www.gfpiping.com for updated info.
Fusion Technology
^ = 40% Restock Charge* = Non-Cancelable/Non-Returnable
12.33
Extension Cablefacing tool
D
• Extension cable for remote fusion.d-d[mm]
Part No. USD lbs Pieces
20 - 63 790 131 048 * 146.00 0.966 1
Extension Cableheater
D
• Extension cable for remote fusion.d-d[mm]
Part No. USD lbs Pieces
20 - 63 790 131 049 * 526.00 1.691 1
Power Cord IR63 DDescription Part No. USD lbs
Power Cord IR63 150 131 246 * 42.00 0.002 Pipe Stop D• The pipe stop defines the allowance when the pipes are clamped into position.d-d[mm]
Part No. USD lbs Pieces
20 - 63 790 131 046 * 105.00 0.948 1
Adjustment Tools DDescription Part No. USD lbs
Allen Wrench 3mm 24387003 * 2.00Allen Wrench 4mm 790 131 264 * 8.00 0.441T-10 Torx Wrench 790 131 129 * 8.00 0.004
Effective Jan. 1, 2013. See www.gfpiping.com for updated info.
Fusion Technology
^ = 40% Restock Charge* = Non-Cancelable/Non-Returnable
12.34
IR-110 Plus® Fusion Joining Machine andAccessoriesIR-110 Plus® Fully-Equipped Machine DModel:• Fully-equipped fusion joining machine for welding SYGEF® Standard, SYGEF® Plus,
PROGEF® Standard, PROGEF® Natural, PROGEF® Plus, PE 100 (PFA/ECTFE onrequest) in dimensions d 20-110 mm, 2 USB interfaces, monochrome display withicons and 12 languages.
• 1-phase AC (50/60 Hz) 230 V L/N/PE• Machine housing complete (1 pcs.)• Heater and facing tool assembly (1 pcs.)• Transport box (1 pcs.)• Pipe stop (1 pcs.)• Clamping inserts d 20-90 mm (8 pcs. per dimension)• End caps PE d 20-110 mm (4 pcs. per dimension)• Power supply cable 230 V (1 pcs.)• Cleaning brush No. 8 (1 pcs.)• Hexagon keys 4 mm (1 pcs.), 5 mm (1 pcs.), 6 mm (1 pcs.)• Socket wrench (facing blades) (1 pcs.)• Accessory Tray (1 pcs.)• Manual (1 pcs.)d-d[mm]
Part No. USD lbs
20 - 110 790 132 001 * 43670.00 165.345 Clamping inserts D• The clamping inserts are different for each dimension. They are used to clamp and
position the pipe components.d[mm]
Part No. USD lbs Pieces
20 790 132 051 * 90.00 0.238 125 790 132 052 * 90.00 0.234 132 790 132 053 * 90.00 0.229 140 790 132 054 * 90.00 0.220 150 790 132 055 * 90.00 0.209 1
63 790 132 056 * 90.00 0.187 175 790 132 057 * 90.00 0.192 190 790 132 058 * 90.00 0.141 1
Clamping inserts PFA D• The clamping inserts are different for each dimension. They are used to clamp and
position the pipe components.d[inch]
Part No. USD lbs Pieces
1∕4 790 132 062 * 127.00 0.240 11∕2 790 132 063 * 127.00 0.236 13∕4 790 132 064 * 127.00 0.234 11 790 132 065 * 127.00 0.227 12 790 132 066 * 127.00 0.194 1
Effective Jan. 1, 2013. See www.gfpiping.com for updated info.
Fusion Technology
^ = 40% Restock Charge* = Non-Cancelable/Non-Returnable
12.35
Replacement Blades for Facing Tool D• A set includes two facing knives. Each facing knife has four blades. The blade may be
turned three times before it must be replaced.d-d[mm]
Part No. USD lbs Pieces
20 - 110 790 132 061 * 196.00 0.015 2 PE Pipe End Caps D• A set includes 4 end caps. The end caps are different for each dimension. The ends
of the pipe must be closed. The caps prevent heat loss due to airflow in the fusionzone and guarantee optimum fusion results of the pipe components.
d[mm]
Part No. USD lbs Pieces
20 790 131 030 * 18.00 0.004 425 790 131 031 * 18.00 0.022 432 790 131 032 * 23.00 0.002 440 790 131 033 * 23.00 0.011 450 790 131 034 * 23.00 0.011 4
63 790 131 035 * 30.00 0.051 475 790 133 036 * 33.00 0.209 490 790 133 037 * 33.00 0.243 4
110 790 133 038 * 41.00 0.397 4 Pipe Stop D• The pipe stop defines the allowance when the pipes are clamped into position.d-d[mm]
Part No. USD lbs Pieces
20 - 110 790 132 059 * 254.00 1.543 1
Effective Jan. 1, 2013. See www.gfpiping.com for updated info.
Fusion Technology
^ = 40% Restock Charge* = Non-Cancelable/Non-Returnable
12.36
IR-225 Plus® Fusion Joining Machine andAccessoriesIR-225 Plus® machine complete with stainless steelwork table and label printer
D
Model:• Fully-equipped fusion jointing machine for welding SYGEF Standard, SYGEF Plus,
PROGEF Standard, PROGEF Natural, PROGEF Plus, PE 100 in dimensions d63-225 mm, 2 USB interfaces, monochrome display with icons and 12 languages.
• 1-phase AC (50/60 Hz) 230 V L/N/PE or 3-phase AC (50/60 Hz) 400 V/230 VL1/L2/L3/N/PE
• Machine base (1 pcs.)• Facing tool (1 pcs.)• Heater assembly (1 pcs.)• Working table, HP (1 pcs.)• Movable clamping units (1 pcs.)• Clamping inserts d 63-225 mm (8 pcs. per dimension)• End caps PE d 63-225 mm (4 pcs. per dimension)• Transportation lock (1 pcs.)• Pipe stop (1 pcs.)• Hexagon key 5 mm (1 pcs.)• Hexagon key 6 mm (1 pcs.)• Combination ring /open-jaw wrench 13 mm (1 pcs.)• Cleaning brush (1 pcs.)• Connecting cable 400 V - 230 V (1 pcs.)• Ball for lever (1 pcs.)• Manual (1 pcs.)d-d[mm]
Part No. USD lbs
63 - 225 790 133 009 * 62384.00 998.684 HP Stainless Steel Work Table andTransportation Container
D
• Multifunction working table for the IR-225 Plus® fusion joining machine with two inte-grated drawer. Especially for the use in clean room environment. The working table ismade of steel with a stainless steel table.
Part No. USD lbs Pieces
790 133 021 * 6160.00 485.012 1 Pipe Clamp Inserts D• The clamping inserts are different for each dimension. They are used to clamp and
position the pipe components.d[mm]
Part No. USD lbs Pieces
63 790 133 026 * 154.00 1.700 175 790 133 027 * 154.00 1.647 190 790 133 028 * 154.00 1.523 1
110 790 133 029 * 154.00 1.420 1160 790 133 032 * 154.00 1.323 1200 790 133 033 * 154.00 1.543 1225 790 133 034 * 154.00 0.595 1
Effective Jan. 1, 2013. See www.gfpiping.com for updated info.
Fusion Technology
^ = 40% Restock Charge* = Non-Cancelable/Non-Returnable
12.37
Pipe Clamp Inserts, IPS D• The clamping inserts are different for each dimension. They are used to clamp and po-sition the pipe components.
d[inch]
Part No. USD lbs Pieces
2 150 900 442 * 254.00 0.002 13 150 900 443 * 254.00 0.002 14 150 900 444 * 254.00 0.002 16 150 900 445 * 254.00 0.002 18 150 900 446 * 254.00 0.002 1
Replacement Blades for Facing Tool D• A set includes two facing knives. Each facing knife has four blades. The blade may be
turned three times before it must be replaced.d-d[mm]
Part No. USD lbs Pieces
63 - 225 790 133 046 * 345.00 0.276 2 PE Pipe End Caps*on request
D
• A set includes 4 end caps. The end caps are different for each dimension. The endsof the pipe must be closed. The caps prevent heat loss due to airflow in the fusionzone and guarantee optimum fusion results of the pipe components.
d[mm]
Part No. USD lbs Pieces
63 790 131 035 * 30.00 0.051 475 790 133 036 * 33.00 0.209 490 790 133 037 * 33.00 0.243 4
110 790 133 038 * 41.00 0.397 4160 790 133 041 * 61.00 0.467 4200 790 133 042 * 97.00 0.992 4225 790 133 043 * 160.00 0.805 4
Pipe Stop D• The pipe stop defines the allowance when the pipes are clamped into position.d-d[mm]
Part No. USD lbs Pieces
63 - 225 790 133 047 * 71.00 0.331 1
Adjustment Tools DDescription Part No. USD lbs
Allen Wrench 5mm 24387005 * 4.00Allen Wrench 6mm 790 101 238 * 10.00 0.176T-25 Torx Wrench 790 133 577 * 13.00 0.020
Open Wrench 13mm 790 133 140 * 24.00 0.110
Effective Jan. 1, 2013. See www.gfpiping.com for updated info.
Fusion Technology
^ = 40% Restock Charge* = Non-Cancelable/Non-Returnable
12.38
Accessories for the IR plastic fusion joiningmachinesTangit KS-Cleaning Tissues D• Wet Tangit cleaning tissues to clean the fusion faces• One box contains 100 tissues
Part No. USD
799298024A * 25.00
IR Plus® Win Weld Program D• The PC data transfer software makes it possible to manage and evaluate easily the
recorded fusion data as required.• incl. Recordcard / USB stick
Part No. USD lbs Pieces
WIN 2000/XP 790 131 471 * 728.00 0.331 1 IR Plus® PCMCIA Record Card D• Fusion data from the machine can be stored on an exchangeable protocol card
(record card) with a storage capacity of approx. 900 fusion protocols. It allows a pa-perless documentation.
Part No. USD lbs Pieces
790 131 473 * 358.00 0.068 1 Label Printer Package IR & BCF DDescription Part No. USD
Label Printer TLP-2844 155 131 031 * 1007.00
Thermal Transfer Labels D• The labels are made of white polyester. The printing, as well as the labels them-
selves, are resistant against:• UV resistant• Temperatures up to 140 °C (284 °F)• Up to 95% humidity• Cleaning agents (Isopropylalcohol etc.)• Two identical labels are printed for each weld. Each roll contains 2500 labels.• Label size: 38 x 19 mm• Specification information available on request from George Fischer.Part No. USD lbs Pieces
790 131 028 * 101.00 0.882 1
Effective Jan. 1, 2013. See www.gfpiping.com for updated info.
Fusion Technology
^ = 40% Restock Charge* = Non-Cancelable/Non-Returnable
12.39
Thermal Printer Ribbon for TLP-2742 / TLP-2844 D• The thermal transfer ribbon is specially suited for printing polyester labels.Part No. USD lbs Pieces
790 131 029 * 27.00 0.168 1
Effective Jan. 1, 2013. See www.gfpiping.com for updated info.
Fusion Technology
^ = 40% Restock Charge* = Non-Cancelable/Non-Returnable
12.40
Upgrade programs for IR plastic fusionjoining machinesIR 63 Plus Upgrade DIn order to give our existing IR-Plus customers the full benefit of the advantages we of-fer a modification kit which enables a reconstruction of all existing IR-Plus machines.The following modifications are included:
• 2 USB interfaces• Monochrome display with icons• New navigation panel• operator guidance in 12 languages
The upgrade of the new IR-Plus components will be executed by Georg Fischer servicecentres in the USA/Tustin, Singapore and CSO Schaffhausen.
Type Part No. USD lbs
IR-63 Plus 790 131 124 * 8288.00 1.102 IR-63 Plus Upgrade Program DDescription Part No. USD lbs
Left Side Adjustable Clamping Station 790 131 110 * 1272.00 5.952Right Side Adjustable Clamping Station 790 131 109 * 1344.00 4.828
IR225 Plus Upgrade DIn order to give our existing IR-Plus customers the full benefit of the advantages we of-fer a modification kit which enables a reconstruction of all existing IR-Plus machines.The following modifications are included:
• 2 USB interfaces• Monochrome display with icons• New navigation panel• operator guidance in 12 languages
The upgrade of the new IR-Plus components will be executed by Georg Fischer servicecentres in the USA/Tustin, Singapore and CSO Schaffhausen.
Type Part No. USD lbs
IR-225 Plus 790 133 124 * 8400.00 14.661
Effective Jan. 1, 2013. See www.gfpiping.com for updated info.
Fusion Technology
^ = 40% Restock Charge* = Non-Cancelable/Non-Returnable
12.41
IR-225 Adjustable Clamping Stationleft
D
• The movable, external clamping unit ensure high operating convenience. Short pipepieces can be clamped on both sides.
• Included in the delivery when a new IR-225 Plus® is ordered.• Previous IR 225 fusion jointing machines can be upgraded.d-d[mm]
Part No. USD lbs Pieces
63 - 225 790 133 061 * 1770.00 23.589 1 IR-225 Adjustable Clamping Stationright
D
• The movable, external clamping unit ensure high operating convenience. Short pipepieces can be clamped on both sides.
• Included in the delivery when a new IR-225 Plus® is ordered.• Previous IR 225 fusion jointing machines can be upgraded.d-d[mm]
Part No. USD lbs Pieces
63 - 225 790 133 062 * 1770.00 22.487 1
Effective Jan. 1, 2013. See www.gfpiping.com for updated info.
Bead and Crevice Free (BCF®) Plus Fusion
Evolution of Innovation
Unsurpassed fusion quality
• No beads
• No crevices
• No transitions
• No dead legs and no microorganic deposits
• Very high weld strength
• Very little stress in the fusion zone, therefore less prone to stress cracking
• Controlled and secured manufactur ing processes
• Globally accepted certifi cation training for quality control personnel and installers
12.42 Effective Jan. 1, 2013. See www.gfpiping.com for updated info.
BC
F®
Plu
s F
us
ion
Pro
ce
ss
Tim
es
*
Mac
hine
Pro
duct
2025
3240
5063
7590
110
BC
F®
Plu
sP
RO
GE
F®
Na
tura
l P
N 6
13
:00
17
:00
24
:00
PR
OG
EF
® N
atu
ral
PN
10
6:0
07
:00
9:0
01
1:0
01
4:0
02
0:0
01
6:0
02
1:0
03
0:0
0
SYG
EF
® P
N 1
01
5:0
02
0:0
0
SYG
EF
® P
N 1
67
:00
7:0
01
0:0
01
0:0
01
2:0
01
3:0
01
8:0
02
4:0
03
6:0
0
*All
tim
es in
min
utes
:sec
onds
and
are
app
roxi
mat
e ba
sed
on 6
8°F/
20°C
am
bien
t tem
pera
ture
. Ti
mes
onl
y ac
coun
t for
hea
ting
and
co
olin
g of
pro
duct
s pe
r th
e G
F Fu
sion
Tra
inin
g P
rogr
am.
12.43Effective Jan. 1, 2013. See www.gfpiping.com for updated info.
Fusion Technology
^ = 40% Restock Charge* = Non-Cancelable/Non-Returnable
12.44
BCF® Plus Plastic Fusion Joining MachineBCF® Plus fully equipped machine d 20 - 63 mm DFully-equipped machine for bead and crevice free jointing of SYGEF Standard, SYGEFPlus, PROGEF Natural of the dimensionsd 20-63 mm with integrated remote welding unit, 2 USB interfaces, monochrome displaywith icons and 12 languages.
Supply:1-phase AC (50/60 Hz) 115 / 230 V L/N/PE
Delivery includes:
• Machine housing (1 pcs.) incl. remote welding unit (1 pcs.)• Transport box (1 pcs.)• HP working table (1 pcs.)• Heating stations d 20-63 mm (6 pcs.)• Clamping units small (2 pcs.) with clamping inserts d 20-63 mm (24 pcs.)• Facing tool small (1 pcs.) with facing inserts d 20-63 mm (6 pcs.)• Facing tool support (1 pcs.)• Hose box (1 pcs.) incl. air hose (1 pcs.)• Supporting tools small d 20-63 mm (2 pcs.)• BReT (1 pcs.)• Hose cutter (1 pcs.)• Air hose reducer (6-4 mm) (1 pcs.), air hose socket (4-4 mm) (1 pcs.)• Extension cable (1 pcs.)• Manual (1 pcs.)
d-d[mm]
Part No. USD lbs
20 - 63 790 121 002 * 50400.00 337.304
Effective Jan. 1, 2013. See www.gfpiping.com for updated info.
Fusion Technology
^ = 40% Restock Charge* = Non-Cancelable/Non-Returnable
12.45
BCF® Plus fully-equipped machine d 20 -110 mm DFully-equipped machine for bead and crevice free jointing of SYGEF Standard, SYGEFPlus, PROGEF Natural of the dimensions d 20-110 mm with integrated remote weldingunit.
Supply:1-phase AC (50/60 Hz) 115 / 230 V L/N/PE
Delivery includes:
• Machine housing (1 pcs.) incl. remote welding unit (1 pcs.)• Transport box (1 pcs.)• HP working table (1 pcs.)• Heating stations d 20-110 mm (9 pcs.)• Clamping units small (2 pcs.) with clamping inserts d 20-63 mm (24 pcs.)• Clamping units big (2 pcs.) with clamping inserts d 75-110 mm (12 pcs.)• Adapter for clamping unit d 75-110 mm (2 pcs.)• Facing tool small (1 pcs.) with facing inserts d 20-63 mm (6 pcs.)• Facing tool big (1 pcs.) with facing inserts d 75-110 mm (3 pcs.)• Facing tool support (1 pcs.)• Hose box (1 pcs.) incl. air hose (1 pcs.)• Supporting tools small d 20-63 mm (2 pcs.)• Supporting tools big d 75-110 mm (2 pcs.)• BReT (1 pcs.)• Hose cutter (1 pcs.)• Air hose reducer (6-4 mm) (1 pcs.), air hose socket (4-4 mm) (1 pcs.)• Extension cable (1 pcs.)• Manual (1 pcs.)
d-d[mm]
Part No. USD lbs
20 - 110 790 121 001 * 61600.00 414.465 BCF® Plus large dimension package d 75-110 mm D• This package is necessary to complete BCF Plus machines which are only equipped
for small dimensions d 20-63 mm.• Delivery includes:• Clamping units big (2 pcs.) with clamping inserts d 75-110 mm (12 pcs.)• Facing tool big (1 pcs.) with facing inserts d 75-110 mm (3 pcs.)• Supporting tools tall (2 pcs.)• Adapter for clamping unit d 75-110 mm (2 pcs.)d-d[mm]
Part No. USD lbs
75 - 110 790 121 022 * 5488.00 17.873
Effective Jan. 1, 2013. See www.gfpiping.com for updated info.
Fusion Technology
^ = 40% Restock Charge* = Non-Cancelable/Non-Returnable
12.46
BCF® Plus Heating stations Dd[mm]
Part No. USD lbs Pieces
20 790 121 111 * 2744.00 3.968 125 790 121 112 * 2800.00 4.012 132 790 121 113 * 2800.00 4.167 140 790 121 114 * 2912.00 5.282 150 790 121 115 * 3024.00 5.291 1
63 790 121 116 * 3136.00 4.740 175 790 121 117 * 3920.00 7.937 190 790 121 118 * 3920.00 7.937 1
110 790 121 119 * 4032.00 7.760 1 BCF® Bladder for SYGEF® PVDF D• Only suitable for welding SYGEF® PVDF and not for PROGEF® Natural. Silver tip.d[mm]
Part No. USD lbs Pieces
20 790 122 041 * 110.00 0.031 125 790 122 042 * 110.00 0.044 132 790 122 043 * 117.00 0.082 140 790 122 044 * 117.00 0.172 150 790 122 045 * 132.00 0.291 1
63 790 122 046 * 148.00 0.304 175 790 121 047 * 281.00 0.448 190 790 121 048 * 292.00 0.450 1
110 790 121 049 * 318.00 1.217 1 BCF® Plus Bladder for PROGEF® NaturalPolypropylene
D
• Only suitable for welding PROGEF® Natural. Blue tip.d[mm]
Part No. USD lbs Pieces
20 790 122 091 * 134.00 0.084 125 790 122 092 * 134.00 0.046 132 790 122 093 * 143.00 0.088 140 790 122 094 * 143.00 0.110 150 790 122 095 * 165.00 0.231 163 790 122 096 * 187.00 0.304 1
BCF® Plus Facing Tool D• Inclusive crank handle, mounting material and clamping inserts. Suitable for SYGEF
(PVDF) as well as PROGEF Natural.d-d[mm]
Part No. USD lbs Pieces
20 - 63 790 121 052 * 1904.00 3.086 175 - 110 790 121 053 * 2464.00 6.614 1
Effective Jan. 1, 2013. See www.gfpiping.com for updated info.
Fusion Technology
^ = 40% Restock Charge* = Non-Cancelable/Non-Returnable
12.47
BCF® Plus Facing Tool Inserts D• These dimension-specific parts are inserted into the facing tool, in order to be able to
face the end of the pipes smoothly and parallel.d[mm]
Part No. USD lbs Pieces
20 790 121 061 * 123.00 0.353 125 790 121 062 * 123.00 0.331 132 790 121 063 * 123.00 0.291 140 790 121 064 * 123.00 0.276 150 790 121 065 * 123.00 0.220 1
63 790 121 066 * 123.00 0.110 175 790 121 067 * 168.00 0.661 190 790 121 068 * 168.00 0.441 1
110 790 121 069 * 168.00 0.198 1 BCF® Plus Facing Tool Mounting Plate Dd-d[mm]
Part No. USD lbs Pieces
20 - 110 790 121 055 * 560.00 1.200 1
BCF® Plus Clamp Inserts Dd[mm]
Part No. USD lbs Pieces
20 790 131 038 * 59.00 0.198 125 790 131 039 * 59.00 0.198 132 790 131 040 * 59.00 0.115 140 790 131 041 * 59.00 0.163 150 790 131 042 * 59.00 0.220 1
63 790 131 043 * 59.00 0.077 175 790 121 036 * 83.00 0.315 190 790 121 037 * 83.00 0.095 1
BCF® Plus Hose Reel D• For the clean and professional storage of the air hose.d[mm]
Length[m]
Part No. USD lbs Pieces
4 11 790 121 151 * 627.00 2.456 1 BCF® Plus Hose Dd[mm]
Length[m]
Part No. USD lbs
4 11 790 122 087 * 32.00 0.267 BCF® Air Hose Reducer DSize[mm]
Part No. USD
4 x 6 790 122 103 15.00
Effective Jan. 1, 2013. See www.gfpiping.com for updated info.
Fusion Technology
^ = 40% Restock Charge* = Non-Cancelable/Non-Returnable
12.48
BCF® Plus Supporting Tool Dd-d[mm]
Part No. USD lbs Pieces
20 - 63 790 121 072 * 448.00 0.542 175 - 110 790 121 073 * 616.00 2.077 1
BCF® Plus Bladder Removal Tool DPart No. USD lbs Pieces
790 121 075 * 123.00 0.174 1
Upgrade Program DIn order to give our existing BCF Plus customers the full benefit of the advantages weoffer a modification kit which enables a reconstruction of all existing BCF Plus ma-chines.The following modifications are included:
• 2 USB interfaces• Monochrome display with icons• New navigation panel• operator guidance in 12 languages
The upgrade of the new BCF Plus components will be executed by Georg Fischer ser-vice centres in the USA/Tustin, Singapore and CSO Schaffhausen.
Type Part No. USD lbs
BCF Plus 790 121 124 * 8512.00 1.102
Effective Jan. 1, 2013. See www.gfpiping.com for updated info.
Fusion Technology
^ = 40% Restock Charge* = Non-Cancelable/Non-Returnable
12.49
Accessories for the BCF®Plus plastic fusionjoining machineTangit KS-Cleaning Tissues D• Wet Tangit cleaning tissues to clean the fusion faces• One box contains 100 tissues
Part No. USD
799298024A * 25.00
BCF® Plus Win-Weld Program D• The PC data transfer software makes it possible to manage and evaluate easily the
recorded fusion data as required.• incl. Recordcard / USB stick
Part No. USD lbs Pieces
WIN 2000/XP 790 121 471 * 728.00 0.176 1 PCMCIA Record Card D• Fusion data from the BCF® Plus- machine can be stored on an exchangeable pro-
tocol card (record card) with a storage capacity of approx. 900 fusion protocols. It al-lows a paperless documentation.
Part No. USD lbs
790 121 473 * 358.00 0.068 Label Printer Package IR & BCF DDescription Part No. USD
Label Printer TLP-2844 155 131 031 * 1007.00
Thermal Transfer Labels D• The labels are made of white polyester. The printing, as well as the labels them-
selves, are resistant against:• UV resistant• Temperatures up to 140 °C (284 °F)• Up to 95% humidity• Cleaning agents (Isopropylalcohol etc.)• Two identical labels are printed for each weld. Each roll contains 2500 labels.• Label size: 38 x 19 mm• Specification information available on request from George Fischer.Part No. USD lbs Pieces
790 131 028 * 101.00 0.882 1
Effective Jan. 1, 2013. See www.gfpiping.com for updated info.
Fusion Technology
^ = 40% Restock Charge* = Non-Cancelable/Non-Returnable
12.50
Thermal Printer Ribbon for TLP-2742 / TLP-2844 D• The thermal transfer ribbon is specially suited for printing polyester labels.Part No. USD lbs Pieces
790 131 029 * 27.00 0.168 1
Effective Jan. 1, 2013. See www.gfpiping.com for updated info.
Fusion Technology
^ = 40% Restock Charge* = Non-Cancelable/Non-Returnable
12.51
Rental ProgramElectro Plus D• Prices are monthly, prorated by calendar day• Complete Electro Plus Fusion Machine
d-d[inch]
Description Part No. USD
1∕2 - 12 Electro Plus R50000001 371.00 MSA250 D
• Prices are monthly, prorated by calendar day• Includes Cable Assembly, Bar Code Set with Continuity Tester and Carrying Case
d-d[inch]
Description Part No. USD
1∕2 - 12 MSA250 SE, 115V AC R99350500 371.001∕2 - 12 MSA250 EX Multi, 230C AC R99350520 371.00
SG110 Socket Fusion Machine D• Prices are monthly, prorated by calendar day• Rental does not include heater bushings or peeling tools; these items must be pur-
chased separately
d-d[mm]
Description Part No. USD
16 - 110 SG110 Socket Fusion Machine R90310003 795.00 Contact Butt Fusion Machines D• Prices are monthly, prorated by calendar day• The GF315 is equipped with an automatic heater
d-d[mm]
Description Part No. USD
20 - 110 MC110 R90109321 Call40 - 160 GF160 R90114061 1484.0075 - 250 GF250 R90115030A 2014.0090 - 315 GF315 CNC (SUVI400) R90112030A 2756.00
200 - 500 GF500 (SUVI50) R90116040A 3286.00 Type 515 Diaphragm Valve Assemble/DisassembleTool
D
Size[inch]
Part No. USD RentalPart No.
USD
1 ∕ 150 515 001 Call R150515001B Call1 1∕4 150 515 002 Call R150515002B Call1 1∕2 150 515 003 Call R150515003B Call
2 ∕ 150 515 004 Call R150515004B Call
Effective Jan. 1, 2013. See www.gfpiping.com for updated info.
Fusion Technology
^ = 40% Restock Charge* = Non-Cancelable/Non-Returnable
12.52
IR Plus Machines D• Prices are monthly, prorated by calendar day• A power converter (115/230V AC) is included with the IR63 and IR110 machine• The IR225 and IR315 come equipped with a label printer
d-d[mm]
Description Part No. USD
20 - 63 IR63 Plus R90131005 2226.0020 - 63 IR63 Plus with PFA Software and 1/4-2" inserts F90131005 2544.00
20 - 110 IR110 Plus R90132001 2650.0063 - 225 IR225 Plus R90133009 2915.00
250 - 315 IR315 Plus R90134001 3604.00- Label Printer TLP2844 R55131031 106.00
BCF Plus Machine D• Prices are monthly, prorated by calendar day• Rental includes facing tool and remote head. Rental does not include bladders and air
hose which must be purchased separately
d-d[mm]
Description Part No. USD
20 - 63 BCF Plus R90121002 2544.0075 - 110 BCF Plus Extension Package R90121022 212.00
Pipe Cutter Tools D
• Prices are monthly, prorated by calendar day• Rental does not include cutting blades, which must be purchased separately
d-d[mm]
Description Part No. USD
110 - 250 PPC 250 R90201002 610.00110 - 250 PPC 250 HP R90201011 477.00160 - 315 PPC 315 HP R90109800 477.00160 - 355 KS 355 R90202001 610.00315 - 500 KS 1600 R90109601 901.00
Effective Jan. 1, 2013. See www.gfpiping.com for updated info.
Rental Arrangements
Rental charges begin 2-10 days after shipping date and end
on date machine is received at Georg Fischer and are based
on a monthly rate prorated by calendar days.
The distributor will be invoiced for rental charges
immediately after shipment of Equipment. Georg Fischer will
not assume any responsibility for delays in shipment due to
shipping errors, strikes or circumstances beyond its control.
Default Remedies
If Distributor fails to pay any rental payment or other sum
due Georg Fischer hereunder in a timely manner or fails
to observe, keep or perform any other provision of this
agreement required to be observed, kept or performed by
Distributor, and does not cure such default within 5 days after
notice from Georg Fischer, then Georg Fischer shall have the
right to:
(a) Sue for and recover all rents and other payments then
accrued or thereafter accruing under this agreement;
(b) Take possession of any or all of the items of Equipment
covered by this Agreement, without demand or notice to
Distributor, wherever the Equipment may be located, without
any court order or other process of law, in which event
Distributor waives any and all damages occasioned by such
taking of repossession, including, but not limited to, any damage
caused to Distributor's premises in connection with the removal
of the Equipment.
(c) Terminate this Agreement as to any or all items of
Equipment covered by this Agreement; or
(d) Pursue any other available remedy to Georg Fischer at law
or in equity.
Obligation of Distributor Continues
Notwithstanding any repossession of any item of Equipment
by Georg Fischer or any other action which Georg Fischer
may take, Distributor shall be and remain liable for the full
performance of all of its obligations under this Agreement.
Availability of Rental Equipment
Georg Fischer does not guarantee the availability of rental
equipment and will under no circumstances be liable for any
loss of any nature, directly or indirectly arising from the lack
of availability of rental equipment.
Maintenance
During the term of this Agreement, Distributor shall be
responsible for maintaining, or causing to be maintained, the
Equipment by providing or causing to be provided, routine
preventative maintenance and inspection services, to assure
proper operation thereof. In addition, Distributor shall be
solely responsible for any and all repairs required to be made
to the Equipment during the term of this Agreement.
Use of Equipment
Distributor shall insure that the Equipment is used in a
careful and proper manner and in strict conformity with the
purposes and functions for which it was designed and is
intended to be used, shall insure compliance in all respect
with the operating and routine operator maintenance
procedures as described in any manuals relating to the
Equipment supplied to Distributor by Georg Fischer and shall
comply with and conform to all applicable federal, state and
municipal laws, ordinances and regulations relating to the
possession, use or operation of the Equipment.
Receipt of Equipment by Distributor
When Equipment is received by the Distributor, it is the
responsibility of the Distributor to check the contents and
packing slip to determine if all material is correct. Any
discrepancies must be reported in writing to a Georg Fischer
representative within 7 days after receipt of said Equipment
by Distributor.
Return of Rented Equipment
All Equipment must be returned by the designated
reshipment date and clearly tagged and identifi ed with the
RMA number. The distributor has to inform Georg Fischer
about any circumstances that will affect the designated
date of reshipment. Such notice has to be given at least
20 days prior to the designated day. The Equipment must
be returned in the original container, properly packed and
labeled. Lost, damaged, non-repairable shipping containers
will be charged to the Distributor according to the Georg
Fischer then effective Billing Procedures. The freight
carrier must be approved by Georg Fischer, otherwise all
loss or damage during transportation will be charged to the
Distributor. No machines shall be shipped by UPS without
specifi c authorization from Georg Fischer Inc. All BCF and
IR-63 machines shall be secured to a shipping pallet for
all shipments. All C.O.D.'s will be refused. All Equipment
must be returned directly to Georg Fischer in Tustin, CA
for inspection. A normal rework time of 2 hours is allowed
per piece of Equipment. Rework time of more than 2 hours
for a piece of Equipment will be charged to the Distributor
according to the Georg Fischer then effective Billing
Procedures.
Equipment Failure
Georg Fischer reserves the right to repair or replace any
rental equipment which fails. When equipment must be
returned to Georg Fischer for repairs or replacement before
the end of the rental, and these repairs are due to normal
wear and tear, Georg Fischer will pay for the surface shipping
fees to Georg Fischer and return. Carrier must be a Georg
Fischer approved carrier, see Return of Rented Equipment
for details.
Insurance
Distributor shall name Georg Fischer as an additional named
insured, with respect to the equipment, on Distributor's
insurance policies covering all risk or hazards to the
equipment.
DISCLAIMER
GEORG FISCHER WILL UNDER NO CIRCUMSTANCES BE
LIABLE FOR ANY LOSS OR DAMAGE OF ANY NATURE,
DIRECTLY OR INDIRECTLY ARISING FROM ANY INJURY
CAUSED TO THE OPERATOR OF THE EQUIPMENT, SO LONG
AS THE EQUIPMENT IS IN THE POSSESSION AND/OR
CONTROL OF DISTRIBUTOR OR ANY THIRD PARTY.
DISCLAIMER OF WARRANTIES
GEORG FISCHER MAKES NO EXPRESS OR IMPLIED
WARRANTY OF ANY KIND WHATSOEVER WITH RESPECT
TO THE EQUIPMENT INCLUDING, BUT NOT LIMITED TO:
THE MERCHANTABILITY OF ANY ITEM OF EQUIPMENT
OR ITS FITNESS FOR ANY PARTICULAR PURPOSE; THE
DESIGN OR CONDITION OF ANY ITEM OR EQUIPMENT; THE
QUALITY OR CAPACITY OF ANY ITEM OF EQUIPMENT; THE
WORKMANSHIP IN ANY ITEM OF EQUIPMENT; COMPLIANCE
OF ANY ITEM OF EQUIPMENT WITH THE REQUIREMENTS
12.53Effective Jan. 1, 2013. See www.gfpiping.com for updated info.
OF ANY LAW, REGULATION, SPECIFICATION OR CONTRACT
PERTAINING THERETO; PATENT INFRINGEMENT; OR
PATENT DEFECTS. GEORG FISCHER SHALL NOT BE LIABLE
FOR ANY LOSS OR DAMAGE, DIRECTLY OR INDIRECTLY
ARISING FROM THE USE OF THE EQUIPMENT FOR ANY
INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES,
SUCH AS LOSS OR PROFITS, LOSS OR PRODUCTION,
LOSS OF USE OR LOSS OF CONTRACT, ARISING FOR
ANY REASON, INCLUDING DAMAGES RESULTING FROM
DEFECTIVE DESIGN, MATERIALS OR WORKMANSHIP
OR FROM FAULTY INSTRUCTIONS AND WHETHER SUCH
DAMAGES ARE CLAIMED TO ARISE FROM BREACH OF
CONTRACT, IN TORT, THE THEORY OF PRODUCT LIABILITY
OR OTHERWISE.
General Provisions
Georg Fischer’s Inspection Rights
Georg Fischer shall, at any time and all times during regular
business hours of Distributor or User, have the right to enter
the premises of Distributor or User where the Equipment may
be located for the purposes of inspecting the same or observ-
ing its operation and use. Distributor shall give Georg Fischer
immediate notice of any attempted or actual attachment or
other judicial process or levy affecting any of the Equipment.
Ownership of Equipment
Georg Fischer, Distributor and User acknowledge and agree
that Distributor or User has no right, title or interest in or to
the Equipment except for the rental interest set forth in this
Agreement. To the extent necessary to affi rm Georg Fischer's
ownership interest in the Equipment, Distributor or User shall
permit Georg Fischer to affi x a label to each item of Equipment
indicating Georg Fischer's ownership interest. This Agreement
is intended by the parties hereto to create a rental agreement
and not a sale, conditional sale, consignment or any other
legal relationship. Upon request by Georg Fischer, Distribu-
tor or User agrees to execute UCC-1 fi nancing statements, in
form satisfactory to Georg Fischer, evidencing the rental of the
Equipment pursuant to this Agreement. Georg Fischer, as the
owner of the Equipment, shall be entitled to such deductions,
credits and benefi ts as are provided by the Internal Revenue
Code of 1986, as amended to the date hereof or at any time
hereafter, to an owner of personal property including, without
limitation, any investment tax credit with respect to the Equip-
ment.
No Encumbrances or Liens: Notice
Distributor shall not pledge, encumber, create a security inter-
est in or permit any lien to become effective on or with respect
to any of the Equipment. If any of these events take place,
Distributor shall be deemed to be in default of this Agreement.
Distributor shall immediately notify Georg Fischer of any such
liens, charges or other encumbrances of which Distributor has
knowledge. Distributor shall immediately pay or satisfy any
obligation from which any such lien, charge or encumbrance
arises, and shall otherwise keep the Equipment and all right,
title and interest therein free and clear of all such liens, charg-
es and encumbrances. Distributor shall deliver to Georg Fis-
cher appropriate satisfactions, waivers or evidence of payment
or satisfaction of any such obligation.
Risk of Loss
All risk of loss, damage, theft or destruction of or to the Equip-
ment shall be borne by Distributor. No such loss, damage, theft
or destruction of or to the Equipment in whole or in part, shall
impair the obligations of Distributor under this Agreement, all
of which shall continue in full force and effect; and Distributor,
at Georg Fischer's option, shall: (a) place the affected Equip-
ment in good repair, condition and working order; (b) replace
the same with like Equipment in good repair, condition and
working order; (c) pay Georg Fischer an amount equal to all
unpaid rent due and to become due under this Agreement dur-
ing the term of this Agreement or (d) pay Georg Fischer the full
replacement value of the affected Equipment.
Indemifi cation of Georg Fischer
Distributor shall indemnify and defend and hold Georg Fischer,
its offi cers, directors, shareholders, agents, legal representa-
tives, successors and assigns, and each of them, harmless
from and against any and all claims, liabilities, actions, suits,
proceeding, damages, judgments, costs and expenses, includ-
ing attorneys's fees, arising out of, connected with or resulting
from:
(a) Distributor's and/or Distributor's employees', agents' or
invitees' use or misuse of the Equipment; or (b) the breach
by Distributor of any covenant or obligation contained in this
Agreement to be performed or observed by Distributor. The
terms of this paragraph shall specifi cally survive the termina-
tion of this Agreement.
Governing Law
This Agreement will be construed and enforced in accordance
with the internal laws of the State of California without regard
to its confl icts law.
Recovery of Litigation Costs
If any arbitration or other legal proceeding is brought for the
enforcement of this Agreement, or because of any alleged dis-
pute, breach, default or misrepresentation in connection with
or arising out of any of the provisions of this Agreement, the
successful or prevailing party will be entitled to recover such
party's reasonable attorneys' fees and other costs incurred
by such party in such arbitration or other legal proceeding, in
addition to any other relief to which such party or parties may
be entitled.
Severability
In the event that any provision or any part of any provision of
this agreement is held to be illegal, invalid or unenforceable,
such illegality, invalidity or unenforceability will not affect the
validity, legality or enforceability of any other provision or part
thereof.
Successors and Assigns. This Agreement will not be assign-
able by either party without the prior written consent of the
other party.
Waiver
Failure to insist on compliance with any of the terms, cov-
enants or conditions hereof will not be deemed a waiver of
such terms, covenants or conditions, nor will any waiver or
relinquishment of any right or power hereunder at any one
time or more times be deemed a waiver or relinquishment of
such rights or powers at any other time or times.
12.54 Effective Jan. 1, 2013. See www.gfpiping.com for updated info.
Fusion Equipment Rental Agreement Effective January 1, 2008
Complete and fax to 714-731-9056
The undersigned agrees to the foregoing terms and conditions of this Agreement.
To: Georg Fischer LLC
2882 Dow Avenue
Tustin, CA 92780-7258
Attn: _______________________________________________________________________________________________________
From: ______________________________________________________________________________________________________
Date: ______________________________________________________________________________________________________
Distributor Name ____________________________________________________________________________________________
Location ____________________________________________________________________________________________________
P.O. Number ________________________________________________________________________________________________
Date of Rental Return ________________________________________________________________________________________
Authorized Distributor Representative ___________________________________________________________________________
Signature ___________________________________________________________________________________________________
Date _____________________________________________________________________________________
(please print)
12.55Effective Jan. 1, 2013. See www.gfpiping.com for updated info.