setting the standards in cable jointing
TRANSCRIPT
JOINTMASTER
Medium Voltage Cable Terminations(7,2 - 36kV) 3 Core
JOINTMASTER’s - the range of cable termination systems are manufactured by REPL International Group.
JOINTMASTER offers a comprehensive range of medium and high voltage cable terminations aimed at the local and export markets.
These terminations have been independently tested in the KEMA laboratory to the requirements of CENELEC HD629.1 S2
A wide range of complimentary accessories such as cold applied and push-on bushing insulating boots are available for use with the terminations.
The terminations cater for all cable types including PILC and XLPE for both indoor and outdoor applications in all size ranges and voltages up to 36kV
Setting the Standards in Cable Jointing
Jointmaster (Pty) Ltd. PO Box 123898 Alrode 1451. South Africa Ph +27(0)11 9085403 Fax +27(0)11 8645610. e-mail; [email protected]
3 core XLPE Cables
Medium Voltage Joints1 Piece tube for use on
This is an industry first, from REPL-JOINTMASTER allowing for the installation of only one heat shrink tube over the connectors for MV cable joints up to 12kV.
This system allows for faster installation time and the simpler installation eliminates the possibility of partial discharge at the interface of multiple layers of heat shrink tubes as a result of incorrect installation or heat application, ensuring a safe and completely secure joint.
The system has been independently type tested by KEMA, to CENELEC HD629.1 S2, certificate number TIC1596-13 (copy of test report available upon request)
Ÿ Semi conductive layerŸ Insulating layerŸ Stress control layerThe three layer heat shrink extrusion incorporates;
Ideally suited for straight through joint kit applications on single core and three core XLPE cables up to 12kV
JOINTMASTER
JOINTMASTER RIMT
JOINTMASTER RIMT
JOINTMASTER RIMT
Medium Wall Insulating Tube RIMT
JOINTMASTER RIHT
JOINTMASTER RIHT
JOINTMASTER RIHT
Corrosion Protection Heavy Wall Tubing RIHT
REPL-Jointmaster Corrosion Protection heat shrinkable Heavy Wall tubing (RIHT AND rimt), provide environmental sealing of plastic and paper insulated cable terminations and straight through joints up to 36kV.The tubing is manufactured from thermally stabilised, cross linked, non tracking, weather resistant polymeric material and have a shrink ratio of >3:1. With an unlimited shelf life when stored at normal warehouse temperatures.The tubing can be supplied, with or without internally coated hot melt adhesive depending upon the application.
Screened Elbows 630A Bolted Tee Deadbreak (36kV) DT436
Screened Elbows 630A Bolted Tee Deadbreak (12-24kV) DTS624
Ÿ System voltage up to 24kVŸ Continous current 630A (900A
overload for 8hr)Ÿ Conductor sizes;- 12kV 70-
400mm² 24kV 25-400mm²
APPLICATIONŸ For connection of polymeric cable to
transformers, motors, and other equipment with a premoulded separable connector.
Ÿ For indoor and outdoor installations
Setting the Standards in Cable Jointing
Jointmaster (Pty) Ltd. PO Box 123898 Alrode 1451. South Africa Ph +27(0)11 9085403 Fax +27(0)11 8645610. e-mail; [email protected]
MasterSheath Flexible Trailing Cable Joints
JOINTMASTERJOINTMASTER
Setting the Standards in Cable Jointing
Jointmaster (Pty) Ltd. PO Box 123898 Alrode 1451. South Africa Ph +27(0)11 9085403 Fax +27(0)11 8645610. e-mail; [email protected]
Setting the Standards in Cable Jointing
Jointmaster (Pty) Ltd. PO Box 123898 Alrode 1451. South Africa Ph +27(0)11 9085403 Fax +27(0)11 8645610. e-mail; [email protected]
Medium Voltage Cable Joints(7,2 - 36kV)
Medium Voltage Cable Terminations(7,2 - 36kV) Single Core
PILC 3 Core Thru Joint 12kV
Medium Voltage PILC Cable StraightThru Joints - (7,2 - 12kV)
Moulded Insulation Resin Protected(SIRP) Joints for up to 15kV Cables
UnScreend Separable Connector - RUSC(for use up to 17,5kV)
Elastomeric Bushing Insulating Boots FRAB (up to 17,5kV)
Low Voltage Cable Terminations(600/1000V & 3,3kV)
Armoured Joint
Low Voltage Cable Joints (1000V)
Low Voltage Resin Joints (1000V)
Low Voltage Cable Breakouts EB-4
Cable End Caps
Mechanical Torque Shear Connectorsup to 36kV
NKT High Voltage Accessories up to 250kV