setting up gridgain-1.5.1
DESCRIPTION
Agya Adueni. Setting up GridGain-1.5.1. Hardware. The machine featured in this tutorial is a Dell Dimension 8200 with 512mb of RAM and a P4 1.8GHz processor. It ran Fedora Core 6. Prerequisites. Java 1.5 or later should be installed. It can be obtained from http://java.sun.com/javase/6/ - PowerPoint PPT PresentationTRANSCRIPT
Agya Adueni
Hardware
The machine featured in this tutorial is a Dell Dimension 8200 with 512mb of RAM and a P4 1.8GHz processor.
It ran Fedora Core 6
Prerequisites
Java 1.5 or later should be installed. It can be obtained from http://java.sun.com/javase/6/
Download a copy of the gridgain installation. It can be found at http://www.gridgain.com/past_downloads.html
For this presentation, the gridgain installation is located in /opt.
Getting Started Change directory
into the /opt folder
Add execute permissions to the GridGain installation
Run the GridGain installation
GridGain welcome screen. Click Next
Accept the agreement
Choose installation folder
Installing …
Done!! Well, not quite yet
Point to the location of the internet browser executable on your system
Running GridGain node Change directories
to the installed GridGain application
Go into the bin folder
Environment Variables GridGain needs two
environment variables to be set. GRIDGAIN_HOME and JAVA_HOME. Open up an editor to the file /etc/profile
Add the highlighted lines (these must match the locations of your java installation and gridgain installation) to the file.
Run GridGain Run GridGain
Oops! This was caused by the local firewall
Disable Firewall Run the highlighted
command to disable the firewall
Results
Run Gridgain… again Try running the node
again
Success!!! You have
successfully installed GridGain-1.5.1
Congratulations!!!