Ufoakses Training Center 1

Setup Mode Wireless MikroTik

training@ufoakses.co.id

2008

Ufoakses Training Center 2

Point to Point

• AP ( TX )– Mode = bridge– Choose Band– Create SSID

• Client ( RX )– Mode = station /station pseudobridge /station

pseudobridge clone– Choose Band same in AP Band– Connect with scan tool

Ufoakses Training Center 3

Task !

• Create Hidden SSID for your AP

• Create just 1 mac connected for your AP

• Create WEP and WPA

• Create Virtual AP for another connections

Ufoakses Training Center 4

Point to Multi Point

• AP ( TX )– Mode = ap bridge– Choose Band– Create SSID

• Client ( RX )– Mode = station /station pseudobridge /station

pseudobridge clone– Choose Band same in AP Band– Connect with scan tool

Ufoakses Training Center 5

WDS / MeshDynamic WDS / MESH

• AP ( TX )– Mode = ap bridge / bridge– Choose Band– Create SSID – Choose dynamics wds– Choose Wds bridge– Create bridge interface– Bridge port assign

• Ether ( to LAN )• Automatic wds interface

• AP 2 ( TX- RX )– Mode = ap bridge / bridge– Choose dynamic WDS– Choose wds bridge– Create bridge intarface– Bridge port assign

• Ether ( to LAN )• Automatic wds interface

Ufoakses Training Center 6

Static WDS /mesh• AP 1 ( TX )

– Mode = ap bridge / bridge– Choose Band– Create SSID – Choose static Wds– Non wds bridge– Create bridge interface– Create interface wds MAC – wlan radio remote– Bridge port assign

• Ether ( to LAN )• Wds interface

• AP 2 ( TX - RX )– Mode = ap bridge / bridge– Choose Band same in AP Band– Choose static Wds– Non wds bridge– Create bridge interface– Create interface wds MAC – wlan radio remote– Bridge port assign

• Ether ( to LAN )• Wds interface

Ufoakses Training Center 7

Dynamic Mesh• AP 1 ( TX )

– Mode = ap bridge / bridge– Choose Band– Create SSID – Choose dynamics mesh– Choose Wds bridge– Create bridge interface– Bridge port assign

• wlan • Automatic wds interface

• AP 2 ( TX - RX )– Mode = ap bridge / bridge– Choose dynamic mesh– Choose wds bridge– Create bridge intarface– Bridge port assign

• Wlan • Automatic wds interface

Ufoakses Training Center 8

Station WDS• AP 1 ( TX )

– Mode = ap bridge / bridge– Choose Band– Create SSID – Choose dynamics mesh/wds– Choose Wds bridge– Create bridge interface– Bridge port assign

• ether to LAN• Automatic wds interface

• Client ( RX )– Mode = station wds– Create bridge interface– Bridge port assign

• Wlan • Ether to LAN

Ufoakses Training Center 9

WDS Slavejust for dynamic wds/mesh

• AP 1 ( TX )– Mode = ap bridge / bridge– Choose Band– Create SSID – Choose dynamics wds /mesh– Choose Wds bridge– Create bridge interface– Bridge port assign

• ether to LAN• Automatic wds interface

• AP 2 ( TX - RX )– Mode = Wds Slave– Choose dynamic wds/mesh– Choose wds bridge– Create bridge intarface– Bridge port assign

• Ether to LAN• Automatic wds interface

Ufoakses Training Center 10

Nstream Dual-Slave• AP 1 ( TX )

– Mode = Nstream Dual Slave

– Create Nstreme dual interface (press “plus” button in wireless interface window)

– Create remote MAC Wlan

• Client ( RX )– Mode = Nstream Dual Slave

– Create Nstreme dual interface (press “plus” button in wireless interface window)

– Create remote MAC Wlan