SETTING UP OF NETGEAR WIRELESS ROUTER

Are you looking to setup your Netgear wireless router? If yes, then you should read the following

information, as the process is explained in a simple way.

Five main things to do in order to setup a Netgear wireless

router.

Place your router at a right location

Connecting router to the modem

Plug in the power adapter and connect the router to your PC

Plug in the power adapter and connect the router to your PC

Get the latest drivers

PLACING ROUTER AT A RIGHT LOCATION

The process related to Netgear Wi-Fi extender setup is not just about making the right connection, but the placement of the router plays an important part too. So, you have to place the router in such a place where it catches the maximum signal.

You have to get the Ethernet cable, which is connected to your modem or the DSL and connect the other end of the cable to the internet port of the Netgear Wi-Fi router.You need to connect an Ethernet cable to the LAN port of the Netgear router. The other end of the Ethernet cable will go into the LAN port of the PC. After doing so, you need to connect the power adapter to the Netgear router, while the power adapter goes into the main powers.

CONNECTING ROUTER TO THE MODEM

Setting up a Netgear wireless router is pretty simple, but you need to check all the connections carefully, as any mistake could result in a faulty network. If you have no idea about how to setup a Netgear wireless router, then you should take the help of a Netgear technical support. They will be able to provide the best information related to the process. Visit us at http://www.netgearroutersetup.com/ or Call at Toll Free Number +1-855-856-2653 .

Netgear Router Setup Helpline