severe & hazardous area experts - fine controls (uk) ltd | fine … · flow rate size cv kv...
TRANSCRIPT
8
Severe & Hazardous Area Experts
3550 SERIES AIR SERVICE UNITSFILTER REGULATORS
• Specifically designed for Severe Offshore Environments
• Non or Self- relieving
• Manual or auto-drain
• 40 Micron element
• Easy Installation, Repair and Replacement
• Ambient Temperature Range -20ºC to +80ºC
(Low temperature version -50ºC)
• 316 Stainless Steel Construction
• Large flow paths minimise pressure drop
Units ordered with a specified pressure range will be supplier complete with a pilot regulator piped using double ferrule fittings
General Description
A 316 Stainless Steel combined unit for filtration and regulation of compressed air in the
offshore and allied industries.
Ambient Temperature Range
• Standard: -20ºC to +80ºC (-4ºF to +176ºF)
• Low Temp: -50ºC (-58ºF) (optional)
Maximum Relief Flow
• At 2 bar (29psi) secondary pressure
0.5cc/sec (0.03 cu in/sec)
Maximum Inlet Pressure
• Manual drain - 20 bar (290 psi)
• Automatic drain - 17 bar (247 psi)
Ports NPT (BSP option available)
• ¼”, ½”, ¾”, 3/8”
Gauge Ports (BSP option available)
• 1/8” NPT
• ¼” NPT (option available)
Relief Vent Port
• 1/8” NPT (Fitted with bug screen)
Ingress Protection
• IP65 when fitted with optional vent port filter
Regulated Pressure
0.50
0.50
0.50
0.50
12 bar
4 bar
2 bar
8 bar
to
to
to
to
to
to
to
to
(7.2
(7.2
(7.2
(7.2
29psi)
58psi)
116psi)
174psi)
Bowl Retention Capacity
• 21cc (1.28 cu ins)
Flow Rate
Size Cv Kv
¼” 2.4 34
½” 4.4 63
¾” 5.0 71
3/8” 5.3 47
9
Construction Materials
• Body/bonnet/bowl and internals: 316 Stainless Steel
• Element: 40 Micron 316 Stainless Steel (5 micron option)
• Seals: Fluoroelastomer
Operating Medium
• Gases - air, inert gas, sweet (natural) and sour gases.
Weight1.75 kg (¼”, ½” manual drain)2.05 kg (¼”, ½” automatic drain)1.95 kg (¾” manual drain) 2.25 kg (¾” automatic drain)
Seco
ndar
y Pr
essu
re -
Bar
Flow - dm3/s12010080604020
2
1
0
0
5
4
3
6
0
25020015010050
30
15
0
75
60
45
90
Seco
ndar
y Pr
essu
re -
Psi
Flow - SCFM
Primary pressure 10 barg (145psi)with 8 barg (116) spring
1/4”
3/8”1/2”3/4”
1/4”
3/8”1/2”3/4”
1/4”3/8”1/2”3/4”
1/4”
3/8”1/2”3/4”
Severe & Hazardous Area Experts
3550 SERIES AIR SERVICE UNITSFILTER REGULATORS
2 ports
8 mounting holes
123.
510
4
28
55
28
Filter Regulator with Manual Drain
Filter Regulator with Automaitc Drain
Relief/vent port (R)
2 gaugeports
8 cap screws
67
117 (¾” version)
2 ports
8 mounting holes
123.
519
2.5
28
55
28
Relief/vent port (R)
2 gaugeports
8 cap screws
67
117 (¾” version)
Self Reliving with
manual drain
Non-Reliving with
automatic drain
Non-Reliving with
manual drainSelf Reliving with
automatic drain
10
Severe & Hazardous Area Experts
3550 SERIES AIR SERVICE UNITSFILTERS
• Specifically designed for Severe Offshore Environments
• Rolling diaphragm design
• Precision adjustment
• Easy Installation, Repair and Replacement
• Ambient Temperature Range -20ºC to +60ºC
(Low temperature version -50ºC)
• 316 Stainless Steel Construction
• Large flow paths minimise pressure drop
General Description
A 316 Stainless Steel compressed air filter, designed to provide clean air for offshore and allied
industries.
Ambient temperature range
• Standard: -20ºC to +80ºC (-4ºF to +176ºF)
• Low Temp: -50ºC (-58ºF) (optional)
Working Pressure
• Manual drain 20 bar (290psi)
• Automatic drain 17 bar (247psi)
Bowl Retention Capacity
• 21cc (1.28 cu ins)
Ports NPT (BSP option available)
• ¼”, ½”, ¾”
Gauge Ports (BSP option available)
• 1/8” NPT
• ¼” NPT (option available)
Automatic Drain Port
• 1/8” NPT
Operating Medium
• Gases - air, inert gas, sweet (natural) and
sour gases.
Construction Materials
• Body/bonnet/bowl and internals: 316 Stainless Steel
• Element: 40 Micron 316 Stainless Steel (5 micron option)
• Seals: Fluoroelastomer
11
Severe & Hazardous Area Experts
3550 SERIES AIR SERVICE UNITSFILTERS
Filters with Manual Drain2FLMSV202A4FLMSV202A6FLMSV202A
Filters with Automaitc Drain2FLASV172A4FLASV172A6FLASV172A
31.2
104.
5
ø30
67
28
Filter with automatic drain
Filter with manual drain
Weight1.3 kg (¼”, ½” manual drain)1.6 kg (¼”, ½” automatic drain)1.5 kg (¾” manual drain) 1.8 kg (¾” automatic drain)
31.2
164.
5
28
Air flow for 1/4” & 1/2” Filter
Pres
sure
dro
p - k
Pa
40
35
30
25
20
15
10
5
2512.500
67.55037.5
55
50
45
Flow - dm3/s
12
Severe & Hazardous Area Experts
3550 SERIES AIR SERVICE UNITSPRESSURE REGULATORS
• Specifically designed for Severe Offshore Environments
• Non or Self-relieving
• Easy Installation, Repair and Replacement
• High relief flow
• Rolling diaphragm design
• Precision adjustment.
• Ambient Temperature Range -20ºC to +80ºC
(Low temperature version -50ºC)
• 316 Stainless Steel Construction
• Large flow charateristics
Units ordered with a specified pressure range will be supplier complete with a pilot regulator piped using double ferrule fittings
General Description
A 316 Stainless Steel unit for the pressure regulation of compressed air for offshore and allied industries.
Ambient Temperature Range
• Standard: -20ºC to +80ºC (-4ºF to +176ºF)
• Low Temp: -50ºC (-58ºF) (optional)
Maximum Relief Flow
• At 2 bar (29psi) secondary pressure
0.5cc/sec (0.03 cu in/sec)
Maximum Inlet Pressure
• 20 bar (290 psi)
Gauge Ports (BSP option available)
• 1/8” NPT
• ¼” NPT (option available)
Ingress Protection
• IP65 when fitted with optional vent port filter
0.50
0.50
0.50
0.50
12 bar
4 bar
2 bar
8 bar
to
to
to
to
to
to
to
to
(7.2
(7.2
(7.2
(7.2
29psi)
58psi)
116psi)
174psi)
Regulated Pressure
Maximum Flow
10 bar (145 psi) inlet pressure, 6 bar (87 psi)
secondary pressure with 1 bar (14.5 psi) pressure drop
• 1/4” - 3720 L/min (130 SCFM)
• 1/2” - 6000 L/min (212 SCFM)
Cv
Size Cv Kv
¼” 2.4 34
3/8” 5.3 47
13
Severe & Hazardous Area Experts
3550 SERIES AIR SERVICE UNITSPRESSURE REGULATORS
Weight
• 1.60 kg (3/8”, ½”, ¼” versions)
• 1.80 kg (¾” version)
Self-reliving
2 ports
8 mounting holes
123.
564
28
55
28
Relief/vent port (R)
2 gaugeports
8 cap screws
67
117 (¾” version)
6.0
38.0
4.0
1/8”
BSP
Panel Thickness
M8
38.0
Non-reliving
Stud Mounting KitSBF238-21
25
14
80 100
A
B
C
C
Mounting Bracket Kit
A B C
79 60 24
95 76 24
95 96 28
Seco
ndar
y Pr
essu
re -
Bar
Flow - dm3/s12010080604020
2
1
0
0
5
4
3
6
0
25020015010050
30
15
0
75
60
45
90Se
cond
ary
Pres
sure
- Ps
i
Flow - SCFM
Primary pressure 10 barg (145psi)with 8 barg (116) spring
1/4”
3/8”1/2”3/4”
1/4”
3/8”1/2”3/4”
1/4”3/8”1/2”3/4”
1/4”
3/8”1/2”3/4”
Ports NPT (BSP option available)
• ¼”, 3/8”, ½”, ¾”
Relief Vent Port
• 1/8” NPT (Fitted with bug screen)